Relevant bibliographies by topics / Cutting of metal materials

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Cutting of metal materials'

Author: Grafiati
Published: 4 June 2021
Last updated: 14 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Cutting of metal materials.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Cutting of metal materials"

1

Zhudra, A. P., A. P. Voronchuk, A. A. Fomakin, and S. I. Veliky. "Materials and equipment for surfacing of metal hot cutting knives." Paton Welding Journal 2015, no. 6 (June 28, 2015): 93–95. http://dx.doi.org/10.15407/tpwj2015.06.21.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Gordon, S., and M. T. Hillery. "A review of the cutting of composite materials." Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 217, no. 1 (January 1, 2003): 35–45. http://dx.doi.org/10.1177/146442070321700105.

Full text
Abstract:
The increased use of composite materials has led to an increase in demand for facilities to machine them. There are significant differences between the machining of metals and alloys and that of composite materials, because composites are anisotropic, inhomogeneous and are mostly prepared in laminate form before undergoing the machining process. In most cases, traditional metal cutting tools and techniques are still being used. While the process of metal cutting has been well researched over the years, relatively little research has been carried out on the cutting of composite materials. This paper presents a brief review of research on the cutting of fibre reinforced polymer (FRP) composites and medium-density fibreboard (MDF). Most of the research published is concentrated on the chip formation process and cutting force prediction with unidirectional FRP materials. A review of some recent research on the prediction of cutting forces for MDF is also presented.
APA, Harvard, Vancouver, ISO, and other styles
3

Yamaguchi, K., T. Nakamoto, T. Mizuno, and S. Daido. "The Development of Free Machining Sintered Metals Including Nonmetallic Materials." Journal of Engineering for Industry 115, no. 3 (August 1, 1993): 278–83. http://dx.doi.org/10.1115/1.2901661.

Full text
Abstract:
This paper deals with the lubricating action of nonmetallic inclusions in metal cutting. The purpose of this study is to find the most effective inclusions for metal cutting, and to develop free machining sintered metals including nonmetallic materials. The most effective additives are glass, boron nitride, and talc. By the addition of 3 percent glass to the iron, tool life could be increased 60 times.
APA, Harvard, Vancouver, ISO, and other styles
4

Übelacker, David, Johannes Hohmann, and Peter Groche. "Force Requirements in Shear Cutting of Metal-Polymer-Metal Composites." Advanced Materials Research 1018 (September 2014): 137–44. http://dx.doi.org/10.4028/www.scientific.net/amr.1018.137.

Full text
Abstract:
New approaches in lightweight design require the use of multi materials like metalpolymermetal composites. Composite materials, especially so-called sandwich panels, offer the possibility to combine properties of different materials synergistically. Shear cutting is one of the commonly used manufacturing processes. However, conventional shear cutting of sandwich panels leads to characteristic types of failure, such as high bending of the facings, delamination effects, burr formation and an undefined cracking of the core material. In the present research, the cutting force requirement and the failure progress for lubricant free shear cutting of metal-polymer-metal composites is studied. Two thermoplastic polymers, an aluminum sheet and an unalloyed steel sheet are combined in order to create different composite materials. Furthermore, the composite materials are cut stepwise to examine the different stages of a cutting process in detail.
APA, Harvard, Vancouver, ISO, and other styles
5

Kaneeda, Toshiaki, K. Ishioka, L. Anthony, and Y. Goto. "Lubricant Applying Effect Mechanism in Inconel 718 Cutting - Effects of Cutting Speed and Depth of Cut -." Advanced Materials Research 325 (August 2011): 424–29. http://dx.doi.org/10.4028/www.scientific.net/amr.325.424.

Full text
Abstract:
Applying materials on the precut surface of ductile metal cuttings can greatly improve their machinability, due to the reduction in friction between the lamella of the chip. We refer to this effect as the lubricant applying effect. This paper investigates the influences of the lubricant applying effect on the cutting of the super alloy Inconel 718. The experimental results demonstrate that the lubricant applying effect plays an important role in Inconel 718 cutting as well as ductile metal cutting.
APA, Harvard, Vancouver, ISO, and other styles
6

Kramer, B. M. "Tribological Aspects of Metal Cutting." Journal of Engineering for Industry 115, no. 3 (August 1, 1993): 372–76. http://dx.doi.org/10.1115/1.2901677.

Full text
Abstract:
The machining of metals presents a unique tribological situation in which atomically clean, metallic surfaces are cleaved from the interior of the workpiece and maintained in a condition of nearly 100 percent real area of contact with the tool surface during sliding. The conditions of high pressure, high temperature, and essentially uncontaminated contact during sliding create a highly ideal tribological system for analysis. As compared to conventional sliding wear, the analysis of which is complicated by multiple passes of the counterface materials and various forms of contamination and surface reaction, the predictive modeling of tool wear has achieved somewhat greater, if still modest, success. Current models of cutting tool wear are assessed with regard to their usefulness in developing quantitative analytical methods for designing new tool materials and for selecting optimum tool materials under variations in cutting conditions. Approaches which predict the relative wear resistances of potential tool materials from the physical and chemical properties of the tool-work-piece system, without recourse to calibration tests for each system, are emphasized.
APA, Harvard, Vancouver, ISO, and other styles
7

Weinmann, Klaus J. "Metal cutting principles." Mechanism and Machine Theory 21, no. 5 (January 1986): 445–46. http://dx.doi.org/10.1016/0094-114x(86)90094-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kimura, Tomonori, Takekazu Sawa, and Tatsuyuki Kamijyo. "Study on High-Speed Milling of Steam Turbine Blade Materials - Differences in Cutting Characteristics of an Unforged Ingot and a Forged Part of Stainless Steel." Key Engineering Materials 749 (August 2017): 3–8. http://dx.doi.org/10.4028/www.scientific.net/kem.749.3.

Full text
Abstract:
Stainless steel is an excellent material that has properties such as heat and corrosion resistance. Thus, stainless steel is used as a material in steam turbine blades. Steam turbine blades are mainly manufactured using two methods. One is the cutting of unforged metal ingots. Another is the cutting of forged parts. Small blades are made by cutting metal ingots. Large blades are made by cutting forged parts. The mechanical characteristics of a metal ingot and a forged part, such as hardness and toughness, are almost the same. There were not researches related to a relationship between “an unforged ingot and a forged part of stainless steel” and “the differences of the tool wear and the finished surface by high-speed milling”.In this study, the high-speed milling of stainless steel was attempted for high-efficiency cutting of a steam turbine blade. The differences of the tool wear and the finished surface in the cuttings of an unforged ingot and a forged part were investigated. In the experiment, the cutting tool was a TiAlN coating radius solid end mill made of cemented carbide. The diameter of the end mill was 5 mm, and the corner radius was 0.2 mm. The cutting speed were 100 m/min-600 m/min. The workpieces used were a metal ingot and a forged part of stainless steel. In the results, it was found that the differences of the tool wear and the finished surface in the cuttings of an unforged ingot and a forged part. In the case of the unforged ingot, the flank wear became large with increasing cutting speed. On the other hand, in the case of forged part, the flank wear rapidly increased at a cutting speed of 100 m/min. In addition, the flank wear became smaller than the cutting speed 100 m/min at the cutting speed 200 m/min. Further, the flank wear became large with increasing cutting speed at cutting speeds higher than 200 m/min. That is, the flank wear was at a minimum at a cutting speed of 200 m/min. Although it could not be confirmed the characteristic of high speed milling at an unforged ingot, it has been identified at a forged part.
APA, Harvard, Vancouver, ISO, and other styles
9

Trent, E. M. "Metal cutting and the tribology of seizure: III temperatures in metal cutting." Wear 128, no. 1 (November 1988): 65–81. http://dx.doi.org/10.1016/0043-1648(88)90253-0.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Olaru, Ciprian, Valentin Nedeff, Mirela Panaite-Lehadus, and Ionel Olaru. "Losses Analysis of Materials Resulted from Shredding of Food Materials with Soft Texture by Means of Metal Wire Cutting." Applied Mechanics and Materials 659 (October 2014): 533–38. http://dx.doi.org/10.4028/www.scientific.net/amm.659.533.

Full text
Abstract:
The paper treats the analysis of losses of juice/material resulting from shredding of food materials with soft texture by means of metal wire cutting. For a better relevance of determinations have been chosen different food materials, different diameters of metal wire cutting and different heating temperatures. The objective of this analysis is to identify the correlations that exist between the cutting device and the product obtained after shredding, in order to improve shredding efficiency by reducing the losses of juice / materials resulted from shredding of food materials.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Cutting of metal materials"

1

Gekonde, Haron Ogega. "Influence of dynamic behaviour of materials on machinability." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape11/PQDD_0002/NQ42737.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Wedberg, Dan. "Dislocation density based material model applied in FE-simulation of metal cutting." Licentiate thesis, Luleå tekniska universitet, Material- och solidmekanik, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-26278.

Full text
Abstract:
Simulation based design enables rapid development of products with increased customer value in terms of accessibility, quality, productivity and profitability. However simulation of metal cutting is complex both in terms of numeric and physics. The work piece material undergoes severe deformations. The material model must therefore be able to accurately predict the deformation behavior for a large range of strain, strain rates (>50000 s-1) and temperatures. There exist a large number of different material models. They can be divided into empirical and physically based models. The far most common model used in simulation of metal cutting is the empirical Johnson-Cook plasticity model, JC model. Physically based models are based on the knowledge of the underlying physical phenomena and are expected to have larger domain of validity. Experimental measurements have been carried out in order to calibrate and validate a physical based material model utilizing dislocation density (DD) as internal variable. Split-Hopkinson tests have been performed in order to characterize the material behavior of SANMAC 316L at high strain rates. The DD model has been calibrated in earlier work by Lindgren et al. based on strain rate up to 10 s-1 and temperatures up to 1300 °C with good agreement over the range of calibration. Same good correspondence was not obtained when the model was extrapolated to high strain rate response curves from the dynamic Split-Hopkinson tests. These results indicate that new deformation mechanisms are entering. Repeating the calibration procedure for the empirical JC model shows that it can only describe the material behavior over a much more limited range. A recalibrated DD model, using varying obstacle strength at different temperatures, was used in simulation of machining. It was implemented in an implicit and an explicit finite element code.Simulation of orthogonal cutting has been performed with JC model and DD model using an updated Lagrangian formulation and an implicit time stepping logic. An isotropic hardening formulation was used in this case. The results showed that the cutting forces were slightly better predicted by the DD model. Largest error was 16 % compared to 20 % by the JC model. The predicted chip morphology was also better with the DD model but far from acceptable. Orthogonal cutting was simulated using an updated Lagrangian formulation with an explicit time integration scheme. In this case were two hardening rules tested, isotropic hardening and a mixed isotropic-kinematic hardening. The later showed an improvement regarding the feed force prediction. A deviation of less than 8% could be noticed except for the feed force at a cutting speed of 100 m/min. The time stepping procedure in combination with the mesh refinement seems to be able to capture the chip segmentation quite well without including damage evolution in the material model.Further works will mainly focus on improving the DD-model by introducing relevant physics for high strain rates.

Godkänd; 2010; 20100809 (danwed); LICENTIATSEMINARIUM Ämnesområde: Materialmekanik/Material Mechanics Examinator: Professor Lars-Erik Lindgren, Luleå tekniska universitet Diskutant: Professor Bevis Hutchinson, Swerea KIMAB, Stockholm Tid: Torsdag den 23 september 2010 kl 10.00 Plats: E246, Luleå tekniska universitet

APA, Harvard, Vancouver, ISO, and other styles
3

Okeke, Christopher Igwedinma. "Threading and turning of aerospace materials with coated carbide inserts." Thesis, London South Bank University, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.297919.

Full text
Abstract:
The first part of this study involve an evaluation of the performance of TiN and AlZ03 single layer coated cemented carbide tools when threading inclusion modified, 708M40T (En 19T) 817M40T (En 24T) and Jethete steels at high cutting conditions by monitoring tool wear, failure modes, post threading workpiece properties, micro and macro-surface alterations and subsurface microhardness variation of threaded surfaces. Test results show that flank wear was the dominant failure mode, increasing rapidly when machining at the top speed of 225 m min,l due to the high temperature generated which accelerates thermally related wear mechanisms. Tool life, surface finish, hardness variation and component forces during threading were influenced by the geometry of the cutting edge, shape of wear/length of wear along tool nose/cutting edge after threading. Formation of flake-like oxide debris on the worn inserts was found to increase with nickel content in the workpiece material. The Al20) coated carbide inserts with K05 - K20 substrate gave longer tool life, lower cutting forces, better surface finish! damages as well as minimum hardness variation after threading compared with the TiN coated VSX grade with P20-P30 substrates. This can be related to their superior hardness, density, transverse rupture strength as well as the unalloyed WC fine grained substrate (1/lm) in addition to the high hot hardness, excellent chemical stability and low thermal conductivity of the AlZ03 coating at elevated temperatures. A formula for tool rejection was also developed during this study based on the average flank wear (VBb) and growth in thread root (GTR) in order to establish a scientific basis for assessing wear of threading tools. The second part of this study involve single point turning of a nickel base, G263, alloy using rhomboid-shaped PVD coated (TiN/TiCN/TiN, TiAIN and TiZrN) carbide tools at high speed cutting conditions. The worn tool edges revealed adhesion of a compact fin-shaped structure of hardened burrs with saw-tooth edges. The compact structure also formed on the cut surface of the workpiece material. The use of coolant during machining tend to work harden the root of the burr thereby restricting tool entry at the cutting zone leading to the generation of excessive feed force which subjects the tool edge to premature fracture and consequently lower tool life. The serrated/saw-tooth like edges of the burr encourages abrasion wear on the tool flank face and the formation of shallow cavities/lateral cracks where fragments of hardened workpiece material are deposited causing deterioration of the machined surfaces. Tool life was generally influenced by the cutting conditions employed as well as the insert geometry. Increasing cutting conditions (speed, feed and depth of cut) led to chipping of the cutting edge and/or flaking of coating layers as well as notching and fracture of the cutting edge. These failure modes jointly contributed to lowering tool life during machining. The TiN/TiCN/TiN coated KC732 (Tool A) inserts with positive sharp edges gave overall performance at the optimum cutting conditions established under finishing operation. This is followed by the TiN/TiCN/TiN coated KC732 (Tool B), TiAlN coated KC313 (Tool C) and lastly the TiZrN coated KC313 (Tool D) inserts' with razor sharp edges. Under roughing operation, the ranking order of tool performance is the TiZrN coated KC313 (Tool D), TiN/TiCN/TiN coated KC732 (Tool A), TiAlN coated KC313 (Tool C) and lastly the TiN/TiCN/TiN coated KC732 {Tool B). The difference in tool geometry and coating materials contributed to the relative order of tool performance.
APA, Harvard, Vancouver, ISO, and other styles
4

Stjernstoft, Tero. "Machining of Some Difficult-to-Cut Materials with Rotary Cutting Tools." Doctoral thesis, KTH, Production Engineering, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-3693.

Full text
Abstract:

Automobile and aero industries have an increasing interestin materials with improved mechanical properties. However, manyof these new materials are classified as difficult-to-cut withconventional tools. It is obvious that tools, cutting processesand cutting models has to be devel-oped parallel to materialsscience. In this thesis rotary cutting tools are tested as analternative toexpensive diamond or cubic bore nitridetools.

Metal matrix composites mostly consist of a light metalalloy (such as aluminium or titanium) reinforced with hard andabrasive ceramic parti-cles or fibres. On machining, thereinforcement results in a high rate of tool wear. This is themain problem for the machining of MMCs. Many factors affect thelife length of a tool, i.e. matrix alloy, type, size andfraction of the reinforcement, heat treatment, cuttingconditions and tool properties.

In tests, the Al-SiC MMC formed a deformation layer duringmilling, probably affected by lack of cooling. The dominatingfactor for tool life was the cutting speed. Water jet or CO2cooling of turning did not provide dramatic increase in toollife. With PCD, cutting speeds up to 2000 m/min were usedwithout machining problems and BUE formation. Tool flank wearwas abrasive and crater wear created an "orange-peel type" wearsurface. PCD inserts did not show the typical increase in flankwear rate at the end of its lifetime.

The use of self-propelled rotary tools seems to be apromising way to increase tool life. No BUE was formed on therotary tool at high cutting data. The measurements indicatethat the rotary tool creates twice as good surface as PCDtools. The longest tool life was gained with an inclinationangle of 10 degrees. Tool costs per component will beapproximately the same, but rotary cutting tool allows higherfeeds and therefore a higher production rate and thus a lowerproduction cost.

The rotary cutting operation might have a potential toincrease productiv-ity in bar peeling. The lack of BUE withrotary cutting gives hope on higher tool life. The test resultsshow that tool wear was 27% lower with rotary cutting tools.Increase of cutting speed from 22 to 44 m/min did not affectcutting forces. This indicates that the cutting speed canincrease without significant change in tool wear rate.

Issues related to rotary cutting like cutting models,cutting processes, standards, tools and models have beendiscussed. A tool wear model with kinetic energy has beendiscussed.

KEYWORDS:Difficult-to-Cut material, Metal MatrixComposite (MMC), Machining, Machinability, Rotary Cutting Tool,Acoustic Emission

APA, Harvard, Vancouver, ISO, and other styles
5

Gerth, Julia Lundberg. "Tribology at the Cutting Edge : A Study of Material Transfer and Damage Mechanisms in Metal Cutting." Doctoral thesis, Uppsala universitet, Tillämpad materialvetenskap, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-183186.

Full text
Abstract:
The vision of this thesis is to improve the metal cutting process, with emphasis on the cutting tool, to enable stable and economical industrial production while using expensive tools such as hobs. The aim is to increase the tribological understanding of the mechanisms operating at a cutting edge and of how these can be controlled using different tool parameters. Such understanding will facilitate the development and implementation of future, tribologically designed, cutting tools. Common wear and failure mechanisms in gear hobbing have been identified and focused studies of the material transferred to the tool, in both metal cutting operations and in simplified tribological tests, have been conducted. Interactions between residual stresses in the tool coating and the shape of the cutting edge have also been studied. It was concluded that tool failure is often initiated via small defects in the coated tool system, and it is necessary to eliminate, or minimize, these defects in order to manufacture more reliable and efficient gear cutting tools. Furthermore, the geometry of a cutting edge should be optimized with the residual stress state in the coating, in mind. The interaction between a compressive stress and the geometry of the cutting edge will affect the stress state at the cutting edge and thus affect the practical toughness and the wear resistance of the coating in that area. An intermittent sliding contact test is presented and shown to be of high relevance for studying the interaction between the tool rake face and the chip in milling. It was also demonstrated that material transfer, that can have large effects on the cutting performance, commences already after very short contact times. The nature of the transfer may differ in different areas on the tool. It may include glassy layers, with accumulations of specific elements from the workpiece, and transfer of steel in more or less oxidized form. Both tool coating material, its surface roughness, and the relative speed between the tool surface and the chip, may influence the extent to which the different transfer will occur.
APA, Harvard, Vancouver, ISO, and other styles
6

Tulis, Tomáš. "Návrh letmých rotačních nůžek." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-382471.

Full text
Abstract:
The aim of this diploma thesis is to design flying rotary shears for metal cutting at high speed. The shears are a part of a rolling mill where they are used to cut faces and ends of the simple sections, i.e. rounds or squares. In case of the malfunction of the rolling mill, the shears can be used for scrapping the simple sections. A technical report with function destription of the machine as well as machine design according to specified parameters and control calculations are an integral part of the thesis. The required design documentation is included.
APA, Harvard, Vancouver, ISO, and other styles
7

Shi, Bin 1966. "Identification of the material constitutive equation for simulation of the metal cutting process." Thesis, McGill University, 2008. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=115709.

Full text
Abstract:
This study presents a novel methodology to characterize material plastic behavior within a practical range of stresses, strains, strain rates, and temperatures encountered in the metal cutting process. The methodology is based on integrating a newly developed analytical model with quasi-static tests and orthogonal cutting experiments that incorporate a laser heating system. Friction and heat transfer models are developed to describe the tribological and thermal interactions at the tool-chip interface. These models are implemented in a FEM package in order to improve the accuracy of the simulation of the machining process.
The new analytical model, which is developed to predict the distributions of the stress, the strain, the strain rate, and the temperature in the primary shear zone, is based on conceptual considerations, as well as characterization of the plastic deformation process through comprehensive FEM simulations.
Orthogonal cutting experiments at room temperature and preheated conditions were carefully designed. While the cutting tests at room temperature provided the constitutive data encountered in the primary shear zone, the preheated cutting tests were designed to capture the material behavior at the high level of temperature and strain encountered in the secondary shear zone. In these preheated cutting tests, a laser beam was employed. Quasi-static tests were also utilized to identify some of the coefficients in the constitutive equations, in order to improve the convergence to a unique solution for the constitutive law.
Evaluation criteria were developed to assess the performance of constitutive equations. Based on the developed methodology and the evaluation criteria, a new constitutive equation for Inconel 718 has been proposed. This constitutive equation was further validated by Split Hopkinson Pressure Bar (SHPB) tests and cutting tests in conjunction with FEM simulations. The SHPB test data show an excellent agreement with the proposed material model. The cutting tests and the FEM simulation results also proved the validity of the proposed material constitutive law.
APA, Harvard, Vancouver, ISO, and other styles
8

Oosthuizen, G. A. "Innovative cutting materials for finish shoulder milling Ti-6A1-4V aero-engine alloys." Thesis, Stellenbosch : University of Stellenbosch, 2009. http://hdl.handle.net/10019.1/1561.

Full text
Abstract:
Thesis (MScEng (Industrial Engineering))--University of Stellenbosch, 2009.
The titanium alloys have found wide application in the aerospace, biomedical and automotive industries. Soaring fuel prices and environmental concerns are the fundamental drivers that intensify the demand situation for titanium. From a machining viewpoint, one of the challenges companies face, is achieving high material removal rates while maintaining the form and function of the part. The ultimate aim for a machining business remains to make parts quickly. Conventional cutting speeds range from 30 to 100 m/min in the machining of Ti-6Al-4V. Milling this alloy faster however is challenging. Although titanium is becoming a material of choice, many of the same qualities that enhance titanium‟s appeal for most applications also contribute to its being one of the most difficult materials to machine. The author explored the potential for Polycrystalline diamond (PCD) inserts in high speed milling of Ti-6Al-4V, by trying to understand the fundamental causes of tool failure. The objective was to achieve an order of magnitude increase in tool life, while machining at high speed, simply by reducing some of the failure mechanisms through different cutting strategies. Tool wear is described as a thermo-mechanical high-cycle fatigue phenomenon. The capability of a higher material removal per tool life is achieved in the case of PCD inserts compared to Tungsten carbide (WC). The average surface roughness produced was relatively low. The collected chips were also analyzed. The work demonstrated progress over the performance reported in current literature. The work confirms that there is a region where a sufficiently high temperature in the cutting zone may contribute to extended tool life, provided that the tool material can withstand these extreme conditions.
APA, Harvard, Vancouver, ISO, and other styles
9

Sartkulvanich, Partchapol. "Determination of material properties for use in FEM simulations of machining and roller burnishing." Columbus, Ohio : Ohio State University, 2007. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1167412216.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Rösth, Eric. "Ageing tests of cemented carbide powders : An investigation for increased quality of metal cutting inserts." Thesis, Uppsala universitet, Tillämpad materialvetenskap, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-355320.

Full text
Abstract:
In this study, the ageing effects on powder used for cemented carbide insert production are examined. Ageing is throughout this study, defined as the time dependent change of the magnetic properties: coercive field strength and saturation magnetization. Testing is done using eight different powder compositions stored in both air and in an argon cabinet for 10 weeks, where sampling is done at specific intervals. Samples are stored in vacuum sealed bags for a combined sintering at the last phase of the test. Magnetic properties are assumed to be dependent on the amount of oxides needed to be reduced by taking carbon from the material itself during the vacuum stage of the sintering. To achieve interpretive results, this study also tested available sintering furnaces (DMK and DEK) by sintering trays with patterns of test pieces. This shows that DEK furnaces are much better for the ageing tests performed in this study, since less variation of the magnetic properties are measured because of the symmetrical heat gradient over each tray. Ageing tests strongly suggest that the cause of ageing comes from water absorbed by the PEG in the powder composition. Changing the molecular weight of the PEG seems to have an effect on the powder's ageing sensitivity. Measurements performed in this study show less ageing for Cr-rich DA-powders than for cubic carbide rich DQ-powders.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Cutting of metal materials"

1

Jaspers, Serge. Metal cutting mechanics and material behaviour. Eindhoven: Eindhoven University, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kawalec, Mieczysław. Skrawanie hartowanych stali i żeliwa narzędziami o określonej geometrii ostrza. Poznań: Wydawn. Politechniki Poznańskiej, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Devin, L. N. Prognozirovanie rabotosposobnosti metallorezhushchego instrumenta. Kiev: Nauk. dumka, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Przybylski, Lucjan. Współczesne ceramiczne materiały narzędziowe. Kraków: Politechnika Krakowska, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Szutkowska, Magdalena. Odporność na pękanie spieków ceramicznych stosowanych na ostrza narzędzi skrawających. Kraków: IOS, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Lavrinenko, V. I. Ėlektroshlifovanie instrumentalʹnykh materialov. Kiev: Nauk. dumka, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Vereshchaka, A. S. Rezhushchie instrumenty s iznosostoĭkimi pokrytii͡a︡mi. Moskva: "Mashinostroenie", 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Holtzapffel, Charles. Materials, their differences, choice, and preparation, various modes of working them, generally without cutting tools. Mendham, N.J: Astragal Press, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Seminar, Forschungszentrum Jülich Projektträgerschaft Material und Rohstofforschung. Hartstoffe in Werkzeugen: Beiträge zu einem Seminar der Projektträgerschaft Material- und Rohstofforschung (PLR), am 20. und 21. Juni 1991 in Jülich. Jülich: Forschungszentrum Jülich, Zentralbibliothek, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Ryzhkin, A. A. Teplofizicheskie prot︠s︡essy pri iznashivanii instrumentalʹnykh rezhushchikh materialov. Rostov-na-Donu: Izdatelʹskiĭ t︠s︡entr DGTU, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Cutting of metal materials"

1

Zhu, Yun Ming, Gui Cheng Wang, Z. Wang, and Shu Tian Fan. "Network Database System for Metal Cutting Burr." In Advanced Materials Research, 7–12. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-461-8.7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Muthoosamy, Kasturi, RenuGeetha Bai, and Sivakumar Manickam. "Graphene Metal Nanoclusters in Cutting-Edge Theranostics Nanomedicine Applications." In Advanced Structured Materials, 429–77. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-3328-5_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Davies, M. A., S. E. Fick, C. J. Evans, and G. V. Blessing. "Ultrasonic Detection of Unstable Plastic Flow in Metal Cutting." In Nondestructive Characterization of Materials VIII, 205–9. Boston, MA: Springer US, 1998. http://dx.doi.org/10.1007/978-1-4615-4847-8_32.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Wu, H. Z., and Z. W. Chen. "A Study of Fracture Behaviour of Steel in Metal Cutting." In Fracture of Engineering Materials and Structures, 139–44. Dordrecht: Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-011-3650-1_18.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Astakhov, Viktor P., and Jose Outeiro. "Importance of Temperature in Metal Cutting and Its Proper Measurement/Modeling." In Materials Forming, Machining and Tribology, 1–47. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-030-03822-9_1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Deng, Wen Jun, Wei Xia, L. S. Lu, and Y. Tang. "Finite Element Modeling of Burr Formation in Metal Cutting with a Backup Material." In Advanced Materials Research, 71–76. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-461-8.71.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Anjaiah, D., Raviraj Shetty, R. Pai, M. V. Kini, and S. S. Rao. "A Pressured Steam Jet Approach to Tool Wear Minimization in Cutting of Metal Matrix Composites." In Materials Science Forum, 643–46. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-462-6.643.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Rhim, Sung Han, Hyung Wook Park, and Soo Ik Oh. "Finite Element Analysis of Adiabatic Shear Band Formation during Orthogonal Metal Cutting." In The Mechanical Behavior of Materials X, 885–88. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-440-5.885.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Edwards, Les. "Carbon Anode Raw Materials—Where Is the Cutting Edge?" In Light Metals 2020, 1163–65. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-36408-3_157.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Said, Mohamad Sazali, Nurul Na’imy Wan, Norzalina Othman, Ahmad Razlee Ab Kadir, and Baizura Zubir. "Material Removal Rate and Cutting Force of AlSi/10%AlN Metal Matrix Composite Material in Milling Process Using Uncoated Inserts." In Advanced Structured Materials, 279–87. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-05621-6_25.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Cutting of metal materials"

1

Rosa, Pedro A. R., Paulo A. F. Martins, and Anthony G. Atkins. "New Modelling Strategies For Metal Cutting." In MATERIALS PROCESSING AND DESIGN; Modeling, Simulation and Applications; NUMIFORM '07; Proceedings of the 9th International Conference on Numerical Methods in Industrial Forming Processes. AIP, 2007. http://dx.doi.org/10.1063/1.2740962.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Verma, Alok K., Han P. Bao, and Kartik Nagarathnam. "Comparison of Cost Factors in Laser Processing of Materials and Traditional Metal Cutting Processes." In ASME 2002 International Mechanical Engineering Congress and Exposition. ASMEDC, 2002. http://dx.doi.org/10.1115/imece2002-33957.

Full text
Abstract:
Comparison of cost factors between traditional metal cutting process and laser cutting process has been made. The paper presents a generic cost estimation model for laser cutting of metals. Various types of lasers used in cutting have been discussed as well as the parameters affecting the cutting process.
APA, Harvard, Vancouver, ISO, and other styles
3

Wang, Z. Y., James Jacobs, and Pengtao Sun. "Atom Ionization in Metal Cutting." In ASME 2016 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/imece2016-65434.

Full text
Abstract:
The inspiration for developing this atomic model comes from Merchant’s models for studying chip strain and shear angle. In this paper the 2D Merchant’s Diagram of Circles has been replaced by atoms of the workpiece and tool. This research reveals that atom losing electrons in workpiece is common in metal cutting. Also at the atomic level, cutting workpiece leads to an electric process to occur, which valence electrons leave atoms of the workpiece material as cutting tool pushing forward, forming a charged zone in the workpiece which weakens its strength and eventually causes them to be removed as cutting chip. In this paper, the charged zone was calculated for cutting 1040 steel with a tungsten carbide tool. Experimental results of electromotive force are presented to support the existence of an electrical charge in metal cutting.
APA, Harvard, Vancouver, ISO, and other styles
4

Wiedmaier, M., E. Meiners, Friedrich Dausinger, and Helmut Huegel. "Efficient production by laser materials processing integrated into metal cutting machines." In Europto High Power Lasers and Laser Applications V, edited by Eckhard Beyer, Maichi Cantello, Aldo V. La Rocca, Lucien D. Laude, Flemming O. Olsen, and Gerd Sepold. SPIE, 1994. http://dx.doi.org/10.1117/12.184721.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Fukaya, Kuniaki, and Norio Karube. "Analysis of CO2 laser beam suitable for thick metal cutting." In ICALEO® ‘90: Proceedings of the Laser Materials Processing Conference. Laser Institute of America, 1990. http://dx.doi.org/10.2351/1.5058400.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Klotzbach, Annett, Matthias Lütke, Andreas Wetzig, and Eckhard Beyer. "Advanced remote cutting of non – Metal webs and sheets." In ICALEO® 2009: 28th International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing. Laser Institute of America, 2009. http://dx.doi.org/10.2351/1.5061572.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Amara, El-Hachemi, Karim Kheloufi, and Toufik Tamsaout. "Wavelength effect on striation formation during metal laser cutting." In ICALEO® 2015: 34th International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing. Laser Institute of America, 2015. http://dx.doi.org/10.2351/1.5063243.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Pervaiz, Salman, and Mohamed Gadalla. "Exergy Analysis of Metal Cutting Processes." In ASME 2016 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/imece2016-68035.

Full text
Abstract:
The major global drivers affecting our societies are listed as human population, food based security, energy based security, resource depletion, emissions and associated climate change, community safety, transportation and economic globalization. Out of these global drivers, the most important global driver is identified to be the human population. In order to satisfy the increasing needs of the growing population, manufacturing sector is facing rapid growth and technological developments. Environment friendly design and manufacturing methods are attaining high importance for sustainable development. As manufacturing sector deals with different input resources and waste streams, there is a need to make these developments economically feasible and sustainable in nature. Thermodynamic assessment methodologies can provide an efficient way of quantifying input and output streams. In order to have better understanding of the energy flow involved in the manufacturing process, there is a need to explore a methodology based on the principles of thermodynamics to assess the manufacturing process. The application of second law of thermodynamics, in the form of exergy analysis, is very helpful in improving the efficiency of the process. In addition exergy analysis has potential to reveal the energy inefficiencies present within the process generally mentioned as exergy losses. The increase in exergy efficiency of the process decreases the environmental impact. The presented study provides an overview of implementing exergy analysis for a metal cutting operation of discrete nature. The study revealed that efficiency of removal can be increased by optimizing the input raw materials and electrical energy supplied during the cutting operation.
APA, Harvard, Vancouver, ISO, and other styles
9

Qi, De-Zhong, and San-Qiang Zhang. "A Hierarchical Genetic Algorithm for Sheet Metal Cutting Path Optimization." In The 2nd Annual International Workshop on Materials Science and Engineering (IWMSE 2016). WORLD SCIENTIFIC, 2017. http://dx.doi.org/10.1142/9789813226517_0102.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Qun, Sun, and Zhang Weimin. "Carbon Footprint Analysis in Metal Cutting Process." In 1st International Conference on Mechanical Engineering and Material Science). Paris, France: Atlantis Press, 2012. http://dx.doi.org/10.2991/mems.2012.188.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Cutting of metal materials"

1

Berger, B. S., and I. Minis. Characterization of metal cutting dynamics. Final report. Office of Scientific and Technical Information (OSTI), November 1997. http://dx.doi.org/10.2172/588027.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Chiang, Edwin, and Kathleen Paulson. Alternative Metal Hot Cutting Operations for Opacity. Fort Belvoir, VA: Defense Technical Information Center, November 2014. http://dx.doi.org/10.21236/ada616469.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kistler, B. L. Finite element analyses of tool stresses in metal cutting processes. Office of Scientific and Technical Information (OSTI), January 1997. http://dx.doi.org/10.2172/477614.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Whitenton, Eric P. High-speed dual-spectrum imaging for the measurement of metal cutting temperatures. Gaithersburg, MD: National Institute of Standards and Technology, 2010. http://dx.doi.org/10.6028/nist.ir.650e2010.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Abrashkevich, Yury, Hrigoriy Machyshyn, Tetyana Scherbina, and Oleksandr Marchenko. Technologies of manufacture of abrasive armed circuits for cutting of stone materials. Gіrnichі, budіvelnі, dorozhnі ta melіorativnі mashini, April 2019. http://dx.doi.org/10.31493/gbdmm1892.0303.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Whitenton, Eric P. High-speed dual-spectrum imaging for the measurement of metal cutting temperatures�(2010 edition). Gaithersburg, MD: National Institute of Standards and Technology, 2010. http://dx.doi.org/10.6028/nist.ir.7650.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

M A Ebadian, Ph D., S.K. Dua, Ph.D., C.H.P., and Ph D. Hillol Guha. SIZE DISTRIBUTION AND RATE OF PRODUCTION OF AIRBORNE PARTICULATE MATTER GENERATED DURING METAL CUTTING. Office of Scientific and Technical Information (OSTI), January 2001. http://dx.doi.org/10.2172/793521.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Morrison, Clyde A. Host Materials for Transition-Metal Ions. Fort Belvoir, VA: Defense Technical Information Center, September 1989. http://dx.doi.org/10.21236/ada213605.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Rudisill, T., M. Mark Crowder, and M. Michael Bronikowski. DISSOLUTION OF FISSILE MATERIALS CONTAINING TANTALUM METAL. Office of Scientific and Technical Information (OSTI), May 2007. http://dx.doi.org/10.2172/910168.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Sleight, Arthur W. New Materials at the Metal-Insulator Boundary. Fort Belvoir, VA: Defense Technical Information Center, January 1997. http://dx.doi.org/10.21236/ada329550.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Cutting of metal materials' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography