Relevant bibliographies by topics / Cutting out prepreg

Contents

  1. Journal articles
  2. Book chapters
  3. Conference papers
  4. Reports

Academic literature on the topic 'Cutting out prepreg'

Author: Grafiati
Published: 3 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Cutting out prepreg.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Cutting out prepreg"

1

Zem, Luciele Milani, Katia Christina Zuffellato-Ribas, Maria Izabel Radomski, and Henrique Soares Koehler. "Rooting of semihardwood cuttings of cataia collected in four seasons." Ciência Rural 45, no. 10 (2015): 1815–18. http://dx.doi.org/10.1590/0103-8478cr20140534.

Full text
Abstract:
Drymis brasiliensis Miers is a specie of the Winteraceae family, commonly known as cataia or pepper bark. This research was carried out with the aim to study the rooting of semihardwood cuttings, subjected to different concentrations of indolebutyric acid (IBA), collected in four seasons of the year (autumn, winter, spring and summer). Cuttings were prepared with 10-12cm length, keeping two halved leaves. Bases of cuttings were treated as follows: control (100% water), 0; 500; 1500; 3000; 4500 and 6000mg L-1 IBA.One hundred and twenty after the planting the following variables were assessed: r
APA, Harvard, Vancouver, ISO, and other styles
2

Mireski, Maria Cecília, Manoela Mendes Duarte, Carlos André Stuepp, and Ivar Wendling. "ROOTING OF Ficus enormis MINI-CUTTINGS WITH DIFFERENT LENGTHS." FLORESTA 49, no. 4 (2019): 615. http://dx.doi.org/10.5380/rf.v49i4.54317.

Full text
Abstract:
Ficus enormis is a native species with great ecological potential, especially for ecosystems restoration. The present study aimed to evaluate the rooting, root and vegetative vigor of Ficus enormis mini-cuttings and to determine its best length for the formation of seedlings. Mini-cuttings were collected from clonal mini-garden, prepared with 2 ± 0.2 cm, 4 ± 0.2 cm, 6 ± 0.2 cm, 8 ± 0.2 cm and 10 ± 0.2 cm of length and diameter of 0.5 ± 0.2 cm. The planting was carried out in plastic boxes filled with commercial substrate based on carbonized rice hulls and coconut fiber, conditioned in a greenh
APA, Harvard, Vancouver, ISO, and other styles
3

Afaq Majid Wani, Pavani Ramavath, and M. Shiva Kumar. "To Study the Effect of Auxin Concentrations (IBA and IAA) on Growth Performance of Stem Cutting of Hardwickia binata (Roxb.)." International Journal of Current Microbiology and Applied Sciences 10, no. 11 (2021): 243–49. http://dx.doi.org/10.20546/ijcmas.2021.1011.028.

Full text
Abstract:
The present studies on “Effect of Plant Growth Regulators on Growth Performance of Stem Cutting of Hardwickia binata Roxb” was carried out in the mist chamber of Institute of Forest Biodiversity, Dulapally, Kompally, Hyderabad, during January- April, 2021. The cuttings of Hardwickia binata Roxb were prepared from selected superior phenotypes from the surrounding environments of Kompally, Hyderabad. Hardwickia binata Roxb. is difficult to root and need auxin treatment and controlled environment to successful survival and rooting. The cuttings were treated with 0, 200, 500,1000, 1500, 2000 mg/l
APA, Harvard, Vancouver, ISO, and other styles
4

Kumarasinghe, P. D. G. I. H., W. R. S. Jayawardhana, and K. M. C. Fernando. "Effect of Epidermal Mucous Secretion of Earthworms and other Selected Organic Substances on Rooting of Semi-Hardwood Cuttings of <em>Citrus aurantifolia</em> and Top Cuttings of <em>Dracaena sanderiana</em>." Tropical Agricultural Research and Extension 27, no. 2 (2024): 77–86. http://dx.doi.org/10.4038/tare.v27i2.5700.

Full text
Abstract:
A recent trend in plant growth and propagation is to use natural substances rather than synthetic plant growth regulators. Two experiments were conducted to find out the effect of epidermal mucous secretion (EMS) of earthworms and other organic substances including Aloe vera gel, coconut water and ripe banana on rooting of semi-hardwood cuttings of Citrus aurantifolia and top cuttings of Dracaena sanderiana compared to commercially available plant growth regulators (PGRs). Eleven treatments were prepared using sole application of EMS solution, Aloe vera gel, coconut water and ripe banana, and
APA, Harvard, Vancouver, ISO, and other styles
5

Szczepaniak, Stanisława, Zdzisław Guzikowski, and Monika Henschke. "Assessment of the usefulness of selected media used in the rooting process of lavender cotton shoot cuttings." Folia Horticulturae 28, no. 2 (2016): 195–200. http://dx.doi.org/10.1515/fhort-2016-0023.

Full text
Abstract:
Abstract Lavender cotton (Santolina chamaecyparissus L.) shoot cuttings, obtained from two-year-old mother plants, were rooted in five different media under an unheated foil tunnel. Two ready-made and widely recommended media were used: Hartmann peat substrate and Ceres peat-coconut substrate, as well as three prepared mixtures: high peat + mineral soil, high peat + perlite and high peat + sand. The influence of medium type on the number of rooted cuttings and the quality of the root system was assessed for two cultivation times during a three-year study after eight weeks from the date of cutt
APA, Harvard, Vancouver, ISO, and other styles
6

Kiseleva, Elena N., Maksim A. Rachenko, Irina М. Mokshonova, and Anna M. Rachenko. "Rooting of the Cuttings of Coniferous Species of Dendroflora of the Baikal Region." Lesnoy Zhurnal (Forestry Journal), no. 5 (October 18, 2024): 27–39. http://dx.doi.org/10.37482/0536-1036-2024-5-27-39.

Full text
Abstract:
The active development of production has a negative impact on the environment. Millions of cubic meters of forest are cut down annualy for production needs. These volumes need to be restored. Therefore, research in the field of reforestation is relevant and important. The aim of this study has been to evaluate the technology of rooting coniferous trees during summer grafting. Various terms of green cuttings of coniferous trees of the Pinaceae family were considered, common representatives in the region (Pinus sylvestris L., Picea obovata Ledeb., Picea obovata var. coerulea Malyschev, Pinus sib
APA, Harvard, Vancouver, ISO, and other styles
7

İşbilir, Mehmet Emin, Onur Saraçoğlu, Emircan Dinçer, Alperen Donat, and Ala Asi Mohammed Al-Salihi. "Paclobutrazol Uygulamalarının Karadut (Morus nigra L.) Odun Çeliklerinin Köklenme Performansı Üzerine Etkileri." Turkish Journal of Agriculture - Food Science and Technology 10, sp1 (2022): 2722–24. http://dx.doi.org/10.24925/turjaf.v10isp1.2722-2724.5682.

Full text
Abstract:
Cutting reproduction is the cheapest and most practical method for plants capable of clonal regeneration. However, the difficulties in adventitious root formation in black mulberry cuttings create a disadvantage for mulberry growers. This study aimed to investigate the effect of IBA and Paclobutrazol applications on the rooting ability of black mulberry hardwood cuttings. The experiment was carried out in the polyethylene greenhouse of Tokat Gaziosmanpaşa University Agricultural Research and Application Center in February 2022. As a material, hardwood cuttings prepared from one-year-old branch
APA, Harvard, Vancouver, ISO, and other styles
8

ZHANG, ER-GENG, QIANG CHEN, QIN-XUE WANG, and BIAO HUANG. "PROPERTIES AND CUTTING PERFORMANCE OF TiAlSiN COATING PREPARED BY CATHODE ARC ION PLATING." Surface Review and Letters 23, no. 06 (2016): 1650055. http://dx.doi.org/10.1142/s0218625x16500554.

Full text
Abstract:
TiAlSiN coating was deposited on high-speed steel (HSS) samples and cemented carbide tool inserts, respectively, by a new coating preparation procedure, and its properties and cutting performance were characterized. The coating thickness, chemical composition, microstructure morphology and mechanical properties were investigated by X-ray fluorescence measurement system, energy dispersive spectrometer (EDS), scanning electron microscope (SEM), nanoindentation, Rockwell hardness tester and ball-on-disc tribometer. A 3D orthogonal cutting experiment model was established by DEFORM-3D to study the
APA, Harvard, Vancouver, ISO, and other styles
9

Omar, Taha Jalal, and Sargul Ahmed Khudhur. "Effect of NAA and IAA on Stem Cuttings of Dalbergia Sissoo (Roxb)." Journal of Biology and Life Science 6, no. 2 (2015): 208. http://dx.doi.org/10.5296/jbls.v6i2.7445.

Full text
Abstract:
The plant cuttings is one of the most common methods of vegetative reproduction which is, today, used extensively due to low cost. In order to study the effect of various concentrations of Naphthalene acetic acid (NAA) and Indole acetic acid (IAA) on the rooting of semi- hardwood cuttings of Dalbergia sissoo , an experiment was carried out in a private field in Koya city in 2014. In this research, the treatments were prepared to include hormone of Naphthalene acetic acid in four levels of: (0, 100, 300 and 500 ppm) and Indole acetic acid in four levels of: (0, 100, 300 and 500 ppm), and the bo
APA, Harvard, Vancouver, ISO, and other styles
10

Vopát, Tomáš, Martin Sahul, Marián Haršáni, Ondřej Vortel, and Tomáš Zlámal. "The Tool Life and Coating-Substrate Adhesion of AlCrSiN-Coated Carbide Cutting Tools Prepared by LARC with Respect to the Edge Preparation and Surface Finishing." Micromachines 11, no. 2 (2020): 166. http://dx.doi.org/10.3390/mi11020166.

Full text
Abstract:
Nanocomposite AlCrSiN hard coatings were deposited on the cemented carbide substrates with a negative substrate bias voltage within the range of −80 to −120 V using the cathodic arc evaporation system. The effect of variation in the bias voltage on the coating-substrate adhesion and nanohardness was investigated. It was clear that if bias voltage increased, nanohardness increased in the range from −80 V to −120 V. The coating deposited at the bias voltage of −120 V had the highest nanohardness (37.7 ± 1.5 GPa). The samples were prepared by brushing and wet microblasting to finish a surface and
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Cutting out prepreg"

1

Hirota, Kiyoharu, Yasuhisa Suganuma, Tomoharu Iwasaki, and Takeshi Kuwano. "How to Teach Remotely the Vegetation Works to Protect Slopes Against Mass Wasting: A Case of Using Video Materials in Bhutan." In Progress in Landslide Research and Technology, Volume 1 Issue 2, 2022. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-18471-0_26.

Full text
Abstract:
AbstractThis paper describes the outline of the video tutorial prepared for vegetation workers and relevant officers in Bhutan to learn how vegetation works are to be done in remote areas. The Japan International Cooperation Agency (JICA for short) took a project on cutting unstable slopes in Gangthangkha, Wangdue, Bhutan, so that they should be gentler than 45° to improve slope stability with vegetation works. Particularly stabilizing slopes along Prime National Highway No. 1 (PNH-1 for short) was the overriding priority because slope failures along this highway have reportedly occurred in ra
APA, Harvard, Vancouver, ISO, and other styles
2

Badawi, Nujud M., Sachin Sharma Ashok Kumar, Ramesh Kasi, and Ramesh T. Subramaniam. "The Functionality of Nanofiber Technology and Their Composites for Energy Applications." In Cutting-Edge Advances in Nanofibers and Fibers. IGI Global, 2025. https://doi.org/10.4018/979-8-3373-0230-0.ch001.

Full text
Abstract:
Due to their unique properties, nanofibers have been considered to be one of the most intriguing materials for both academic research and modern industry. Nanofibers offer promising answers to long-standing problems in our daily lives in a number of domains namely environment and energy applications. Furthermore, this chapter gives an overview on nanofibers followed by their significance in electronic uses. Some recommendations for future developments in application based nanofibrous materials are discussed. The processes used to prepare lignin-based carbon nanofibers such as spinning and chem
APA, Harvard, Vancouver, ISO, and other styles
3

Resosemito, Franky Soedirlan, Rosiane Rocha de Araújo, Jorgina Gomes Carvalho, et al. "Development, chemical and technological characterization of dry pasta noodles with wheat flour added to acerola pomace flour." In Agricultural and Biological Sciences: Foundations and Applications. Seven Editora, 2024. http://dx.doi.org/10.56238/sevened2024.023-010.

Full text
Abstract:
Considering that acerola residues are not used as a nutritional source for human consumption and that there is still a lack of knowledge on the part of the scientific community about these residues, it was necessary to prepare the flour from acerola residues. The objective of this work was to develop pasta containing flour from acerola residues, as well as the physicochemical and technological characterization of the prepared pastas. Acerola pomace flour was specifically incorporated at concentrations of 0%, 3%, 5%, 7% and 10% in relation to wheat flour, and the quality of the developed pasta
APA, Harvard, Vancouver, ISO, and other styles
4

Lewis, Geoffrey. "Punctuation." In Turkish Grammar. Oxford University PressOxford, 2000. http://dx.doi.org/10.1093/oso/9780198700364.003.0022.

Full text
Abstract:
Abstract There is no general agreement among Turkish writers or printers on how to punctuate and the reader must be prepared for anything. The advice given in the Introduction to OTD is not without its occasional value: ‘If you are completely bewildered by some sentence, try cutting out all the punctuation marks and often you will find it quite easy to translate.’ One cannot, however, afford to ignore a comma near the beginning of a sentence, which usually indicates the subject: bu Bakann karardr ‘it is this Minister’s decision’; bu, Bakann karardr ‘this is the Minister’s decision’. üniversite
APA, Harvard, Vancouver, ISO, and other styles
5

Ingham, C. A. "Immunocytochemistry II: post-embedding staining." In Experimental Neuroanatomy. Oxford University PressOxford, 1992. http://dx.doi.org/10.1093/oso/9780199633265.003.0006.

Full text
Abstract:
Abstract Post-embedding immunocytochemistry involves carrying out immuno cytochemical techniques on tissue which has been fixed, dehydrated, and embedded in a material suitable for cutting sections for subsequent light or electron microscopy, (e.g. wax, celloidin, resin). It is beyond the scope of this chapter to discuss all the available techniques and so it will concentrate on post-embedding methods applied to material which has been prepared in the conventional manner for electron microscopy, including post-fixation with osmium tetroxide and embedding in epoxy resin. Many antigens do not su
APA, Harvard, Vancouver, ISO, and other styles
6

Grimsted, David. "White Fears: Silencing.Questions." In American Mobbing, 1828-1861. Oxford University PressNew York, NY, 1998. http://dx.doi.org/10.1093/oso/9780195117073.003.0004.

Full text
Abstract:
Abstract After 1835 Southern ideology put one category of person, abolitionists, farther beyond the human pale than even their ambiguous chattel. No one, at least publicly, demurred from the bloody-bones rhetoric that passed for description, as in this typical enough letter in the New Orleans Bee: “The murderous designs of these fiendlike fanatics would not only place the firebrand in our dwellings, but prepare their knives for the cutting of our throats.’’ The self-contradictory elements that followed in this description of the “hydra monster” suggested how abolition became a pastiche of vill
APA, Harvard, Vancouver, ISO, and other styles
7

Pokkuluri, Kiran Sree, and S. S. S. N. Usha Devi N. "CulinarySpectra." In Promoting Sustainable Gastronomy Tourism and Community Development. IGI Global, 2024. http://dx.doi.org/10.4018/979-8-3693-1814-0.ch003.

Full text
Abstract:
The authors explore the domains of gastronomy with the aid of cutting-edge AI technology, revealing the complex layers of flavour dimensions. CulinarySpectra challenges conventional culinary experiences by utilising machine learning algorithms, revolutionising the way we view, prepare, and enjoy food. This initiative sets out on a culinary adventure, using AI as a creative collaborator to find novel and surprising flavour pairings. Through a complicated dance of algorithms, CulinarySpectra strives to unearth hidden synergies, delivering a sensory symphony for the taste. All aspects of the culi
APA, Harvard, Vancouver, ISO, and other styles
8

Ponomarev, Evgeny R. "The Notebooks of Ivan Bunin. Text Characteristics and Problems of Publication." In I.A. Bunin and his time: Context of Life — History of Work. A.M. Gorky Institute of World Literature of the Russian Academy of Sciences, 2021. http://dx.doi.org/10.22455/ab-978-5-9208-0675-8-648-658.

Full text
Abstract:
The paper describes some unknown documents from the Bunin’s archive: the notebooks of the writer, that were prepared for publication in the Bunin’s volume of Literaturnoe nasledstvo [The Literary Heritage]. The author thinks that Bunin’s notebooks are quite different from Chekhov’s notebooks and even Dovlatov’s notebooks as their functions are much wider; this “secondary author’s genre” overcomes its own nature and becomes more like a short story. Also, a Bunin’s notebook is a synthetic genre; we should put them between the sketches and the diaries of the writer, taking in the features of both
APA, Harvard, Vancouver, ISO, and other styles
9

Rajaguru D., Puviyarasi T., and Vengattaraman T. "Malicious Data Stream Identification to Improve the Resource Elasticity of Handheld Edge Computing System." In Securing the Internet of Things. IGI Global, 2020. http://dx.doi.org/10.4018/978-1-5225-9866-4.ch076.

Full text
Abstract:
This article lights the need for the identification of resource elasticity in handheld edge computing systems and its related issues. Under a few developing application situations, for example, in urban areas, operational checking of huge foundations, wearable help, and the Internet of Things, nonstop information streams must be prepared under short postponements. A few arrangements, including various programming motors, have been created for handling unbounded information streams in an adaptive and productive way. As of late, designs have been proposed to utilize edge processing for informati
APA, Harvard, Vancouver, ISO, and other styles
10

Aamir Iqbal, Muhammad, Naila Ashraf, Wajeehah Shahid, et al. "Nanophotonics: Fundamentals, Challenges, Future Prospects and Applied Applications." In Nonlinear Optics [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.98601.

Full text
Abstract:
Nanophotonics encompasses a wide range of nontrivial physical effects including light-matter interactions that are well beyond diffraction limits, and have opened up new avenues for a variety of applications in light harvesting, sensing, luminescence, optical switching, and media transmitting technologies. Recently, growing expertise of fusing nanotechnology and photonics has become fundamental, arising outskirts, challenging basic experimentation and opportunities for new technologies in our daily lives, and played a central role in many optical systems. It entails the theoretical study of ph
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Cutting out prepreg"

1

Seneviratne, Waruna, and Josh Goertz. "TRIAIXIAL OVERBRAIDING OF COMPLEX COMPOSITE STRUCTURES USING MELT-OUT MANDRELS." In SAMPE 2025 Indianapolis. Society for the Advancement of Material and Process Engineering, 2025. https://doi.org/10.33599/nasampe/s.25.0183.

Full text
Abstract:
A serpentine inlet duct for a 30-foot unmanned combat aircraft was designed as part of the Air Force Research Lab (AFRL)-funded Manufacturing for Affordable Sustainable Composites (MASC) program at Wichita State University (WSU). This manufacturing demonstrator aimed to develop a cost model based on manufacturing data, including various materials, processes, and assembly methods. The goal was to enable the industry to leverage this information for on-demand, flexible manufacturing and assembly of composite structures tailored to specific volume, cost, weight, and mission requirements. The inle
APA, Harvard, Vancouver, ISO, and other styles
2

Pang, Su-Seng, Liangfeng Sun, Arthur M. Sterling, and Randy A. Jones. "Preliminary Development of a Composite Pipe Tee-Joint Using Heat Coupling Technology." In ASME 2002 Engineering Technology Conference on Energy. ASMEDC, 2002. http://dx.doi.org/10.1115/etce2002/ot-29147.

Full text
Abstract:
Preliminary study of a composite pipe Tee-joint using heat coupling technology was conducted in this paper. The cutting process of the pipes for the Tee-joint was developed. Because the cutting edges of the pipes were coarse, it is necessary to smooth them. Both epoxy resin and prepreg were applied to the joined areas of the pipes. Shrink tape was also applied to the outside of the prepreg to add pressure and compression force. An optimized cure cycle for the epoxy prepreg used as the bonding materials was determined from the thermal cure analysis. The cure process of the joined pipes by epoxy
APA, Harvard, Vancouver, ISO, and other styles
3

Thomas, Gawain, Marta Antoniv, S. Sherry Zhu, Martin Poitzsch, and Hyung T. Kwak. "Automatic Injection of NanoTags for Improved Cutting Depth Correlation." In 2023 SPWLA 64th Annual Symposium. Society of Petrophysicists and Well Log Analysts, 2023. http://dx.doi.org/10.30632/spwla-2023-0125.

Full text
Abstract:
Real-time evaluation of drill cuttings in the field is highly desired because direct petrophysical characterization of the formation, when integrated into mud-logging workflows, can effectively support logging and measuring while drilling (LWD and MWD) and geosteering. In unconventional reservoirs and for extended-reach horizontal drilling circumstances, an economically affordable method for formation evaluation can optimize well placement, improve the efficiency and safety of drilling and completion, and ultimately maximize recovery cost effectively. Conventional mud-logging technology determ
APA, Harvard, Vancouver, ISO, and other styles
4

Tolstaya, E., A. Shakirov, and M. Mezghani. "Lithology Prediction from Drill Cutting Images Using Convolutional Neural Networks and Automated Dataset Cleaning." In ADIPEC. SPE, 2023. http://dx.doi.org/10.2118/216418-ms.

Full text
Abstract:
Abstract The task of automating the detection of lithology in drill cuttings is an essential aspect of reservoir engineering. As a wellbore is drilled, the rotating bit breaks down the rocks at the bottom of the hole, and these fragments are then transported to the surface through the drilling mud. These fragments are separated from the mud by a shaker upon reaching the surface, enabling the mud to be recycled. The leftover rock fragments, known as drill cuttings, can provide a wealth of information about the geology of the wellbore, drilling speed, and the oil and gas content in the rocks. On
APA, Harvard, Vancouver, ISO, and other styles
5

Avinash, C., S. Ramaswamy, S. Raguraman, and N. Muthukrishnan. "An Investigation on Effect of Workpiece Reinforcement Percentage on Tool Wear in Cutting Al-SiC Metal Matrix Composites." In ASME 2007 International Mechanical Engineering Congress and Exposition. ASMEDC, 2007. http://dx.doi.org/10.1115/imece2007-41231.

Full text
Abstract:
The tool wear mechanism in machining of metal matrix composites (MMC) and its dependence on the percentage of reinforcements with MMC was investigated. Silicon carbide metal matrix composites of two samples were prepared by using stir casting method. Samples having 10 percentage &amp; 20 percentage of silicon carbide particles (grain size ranging from 55 to 85 micron meter) by weight were fabricated in the form of cylindrical bars. Experiments were conducted in medium duty lathe by using poly crystalline diamond (PCD) insert of 1500 grade as cutting insert and the experiment was performed by u
APA, Harvard, Vancouver, ISO, and other styles
6

Gautama Hebbar, A. "Study on the milling of cobalt-chromium (Co-Cr) alloy produced by wire arc additive manufacturing (WAAM)." In Materials Joining and Manufacturing Processes. Materials Research Forum LLC, 2025. https://doi.org/10.21741/9781644903612-1.

Full text
Abstract:
Abstract: In recent years, Cobalt-chromium (Co-Cr) alloys have gained popularity especially in dental and orthopedic implants due to their exceptional properties related to bio compatibility. However, they have not been extensively studied. Wire arc additive manufacturing (WAAM) is a promising manufacturing technique, as it can produce parts with mechanical properties similar to wrought or cast materials. But the surface finish from WAAM produced components are questionable. Milling is widely used technique to improve the surface finish of WAAM produced component. Therefore, this work outlines
APA, Harvard, Vancouver, ISO, and other styles
7

Lee, Sangju, Eberhard Bamberg, and Charles Eason. "Rapid Prototyping of Full Scale House Structures." In ASME 2011 International Manufacturing Science and Engineering Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/msec2011-50179.

Full text
Abstract:
This paper reports on the machining of a construction material (aerated concrete) with a rapid prototyping device, Shapemaker III, which is based on waterjet technology. Preliminary machining tests were carried out to investigate machining conditions (speed and pressure) of separation cuts. Cutting speeds for the waterjet were investigated for two aerated concrete construction materials; autoclaved aerated concrete (AAC) in two strengths (348 and 580 psi compressive strength) and a non-autoclaved, fiber reinforced aerated concrete (FRAC) with a 450 psi compressive strength. Cutting samples wer
APA, Harvard, Vancouver, ISO, and other styles
8

Inui, Masatomo, Tong Zhang, and Nobuyuki Umezu. "Milling Simulation-Based Method to Evaluate Manufacturability of Machine Parts." In ASME 2020 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/detc2020-22124.

Full text
Abstract:
Abstract The designers of mechanical products are generally not experts in machining. Therefore, they often design parts with inherent machining difficulties. Although various design for manufacturability tools have been developed to avoid such problems, their use in practice remains limited due to their lack of versatility. We develop a novel piece of software that can automatically detect difficult-to-machine shapes in a part. Using this software, the designer can determine which shapes are difficult to produce using conventional cutting by themselves, and can modify the shape on the spot. I
APA, Harvard, Vancouver, ISO, and other styles
9

Alexander, David Aaron, and Knut Inge Dalhberg. "Reducing Carbon Footprint Through Swarf-Less Milling Technology." In Offshore Technology Conference. OTC, 2022. http://dx.doi.org/10.4043/31848-ms.

Full text
Abstract:
Abstract With the changing nature of our world and the drive for environmentally friendly action, the Oil and Gas Industry is moving forward in addressing the carbon emissions challenge. The new concept of a Circular Carbon Economy calls first to reduce emissions. Every Oil and Gas well drilled will, at some point, have to be plugged and abandoned (P&amp;A), including wells being prepared for carbon capture, utilization, and storage (CCUS). The integrity of these permanent barriers in CCUS applications is extremely critical. Improving the reliability and efficiency in such P&amp;A operations,
APA, Harvard, Vancouver, ISO, and other styles
10

Alexander, David Aaron, and Knut Inge Dalhberg. "Reducing Carbon Footprint Through Swarf-Less Milling Technology." In Offshore Technology Conference. OTC, 2022. http://dx.doi.org/10.4043/31848-ms.

Full text
Abstract:
Abstract With the changing nature of our world and the drive for environmentally friendly action, the Oil and Gas Industry is moving forward in addressing the carbon emissions challenge. The new concept of a Circular Carbon Economy calls first to reduce emissions. Every Oil and Gas well drilled will, at some point, have to be plugged and abandoned (P&amp;A), including wells being prepared for carbon capture, utilization, and storage (CCUS). The integrity of these permanent barriers in CCUS applications is extremely critical. Improving the reliability and efficiency in such P&amp;A operations,
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Cutting out prepreg"

1

Guy, Charles, Gozal Ben-Hayyim, Gloria Moore, Doron Holland, and Yuval Eshdat. Common Mechanisms of Response to the Stresses of High Salinity and Low Temperature and Genetic Mapping of Stress Tolerance Loci in Citrus. United States Department of Agriculture, 1995. http://dx.doi.org/10.32747/1995.7613013.bard.

Full text
Abstract:
The objectives that were outlined in our original proposal have largely been achieved or will be so by the end of the project in February 1995 with one exception; that of mapping cold tolerance loci based on the segregation of tolerance in the BC1 progeny population. Briefly, our goals were to 1) construct a densely populated linkage map of the citrus genome: 2) map loci important in cold and/or salt stress tolerance; and 3) characterize the expression of genes responsive to cold land salt stress. As can be seen by the preceding listing of accomplishments, our original objectives A and B have
APA, Harvard, Vancouver, ISO, and other styles
2

Siripatrawan, Ubonratana. Active Chitosan-Based Film with Antimicrobial Property for Food Packaging Application. Chulalongkorn University, 2010. https://doi.org/10.58837/chula.res.2010.22.

Full text
Abstract:
This research was aimed to develop an active film from chitosan film incorporated with green tea extract to enhance antioxidant and antimicrobial properties in order to be used for food shelf life extension. The experiments were divided into 3 parts. Firstly, chitosan-based film preparation and modification were determined. The results suggested that the optimum chitosan films could be prepared from 2% chitosan in 1% acetic acid. However, the chitosan film was brittle and had low flexibility. Mechanical property of chitosan film was modified by adding different concentrations of glycerol, as a
APA, Harvard, Vancouver, ISO, and other styles
3

Veung, Naron, and Seyhah Ven. Exploring Insights into Vocational Skills Development and Industrial Transformation in Cambodia. Cambodia Development Resource Institute, 2021. https://doi.org/10.64202/wp.131.202110.

Full text
Abstract:
Industrial development is central to Cambodia’s economic development as it plans to upgrade the country’s status to an upper-middle-income country by 2030 and to a high-income country by 2050. Equipping the workforce with the skills and competencies that match industrial needs requires a great deal of continuous efforts and resources. In this regard, this paper aims to look into the linkage between skills and transformation based on employers’ perspectives. It explores insights into how companies perceive and use the skills and qualifications of their employees to overcome changes in technolog
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Cutting out prepreg' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography