Log in

Relevant bibliographies by topics / Cylindrical pipe

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Cylindrical pipe'

Author: Grafiati

Published: 15 June 2024

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Cylindrical pipe.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Cylindrical pipe"

1

JG, Abuga. "Mathematical Modelling and Simulation of Aluminium Filling in Conical Pipe and Cylindrical Pipe under High Pressure." Physical Science & Biophysics Journal 6, no. 2 (2022): 1–7. http://dx.doi.org/10.23880/psbj-16000215.

Full text

Abstract:

The desired technology for manufacturing light-weight components from metal alloys mostly aluminum and magnesium alloy is Die casting. High pressure die casting requires the liquid metal to be forced at high speed and pressure through a metal pipe. In our study, we seek to study Aluminum filling under high pressure in two different pipes, cylindrical and conical pipes. Two cases are considered for the cylindrical pipe, when the pipe vertical and when the pipe in inclined at an angle of 450 with the horizontal. The governing equations are obtained and the results are compared. The governing equ

APA, Harvard, Vancouver, ISO, and other styles

2

Afandiyev, Emin Musa, and Mahammadali Nuraddin Nuriyev. "ANALYSIS OF THE CONDITION OF A PIPE FIXED IN A CLAMPING DEVICE." EUREKA: Physics and Engineering, no. 1 (January 29, 2021): 78–85. http://dx.doi.org/10.21303/2461-4262.2021.001587.

Full text

Abstract:

Due to the fact that clamping devices are widely used in various industries, the requirements for the operation of such devices are constantly increasing. This is due to an increase in the general requirements for processing accuracy, as well as an increase in the forces acting on the clamped part. The reliability of these devices when working with thin-walled cylindrical parts is of great importance. Thin-walled cylinders used in mechanical engineering are subject to significant loads. With prolonged exposure to loads from clamping forces, as well as from axial tensile forces, plastic d

APA, Harvard, Vancouver, ISO, and other styles

3

Idrus, Fairosidi, Nazri Mohamad, Ramlan Zailani, Wisnoe Wirachman, and Mohd Zulkifly Abdullah. "Experimental Model to Optimize the Design of Cylindrical Heat Pipes for Solar Collector Application." Applied Mechanics and Materials 393 (September 2013): 735–40. http://dx.doi.org/10.4028/www.scientific.net/amm.393.735.

Full text

Abstract:

A heat pipe is a heat-transfer device that use the principles of thermal conductivity and phase change to transfer heat between two ends at almost constant temperature. The thermal peformance of cylindrical heat pipes depends on design parameters such as dimensions of the heat pipe, material, wick structure and the working fluid. An experimental strategy was designed to study the effect of these parameters on the thermal performance of cylindrical heat pipes. The experimental design was conceived by employing the Taguchi method. The final aim of the experiments is to come up with design parame

APA, Harvard, Vancouver, ISO, and other styles

4

Adachi, T., S. Ujihashi, and H. Matsumoto. "Impulsive Responses of a Circular Cylindrical Shell Subjected to Waterhammer Waves." Journal of Pressure Vessel Technology 113, no. 4 (1991): 517–23. http://dx.doi.org/10.1115/1.2928789.

Full text

Abstract:

The impulsive responses of semi-finite and finite pipes filled with fluid are analyzed in order to clarify the validity of Joukowsky’s theory and the fluid-pipe coupling effect. In the analysis, Flu¨gge’s dynamic bending shell theory and the potential theory of compressible perfect fluid are used. The analytical solutions in Laplace transformed domain are obtained. The inversion of the solutions is performed numerically using the algorithm of FFT. When a pipe is fairly long, it is shown that the result of Joukowsky’s theory which has no pipe inertia effect approximately agrees with that of the

APA, Harvard, Vancouver, ISO, and other styles

5

Fukuda, Izumi, Yasunori Harada, and Yuichi Tanaka. "Effect of Temperature on Plastic Buckling Strength of Shot Peened Pipe of Magnesium Alloys." Materials Science Forum 654-656 (June 2010): 747–50. http://dx.doi.org/10.4028/www.scientific.net/msf.654-656.747.

Full text

Abstract:

This paper deals with the effect of temperature on plastic buckling strength of cylindrical pipe of some magnesium alloys subjected to shot peening process. Workpieces are three cylindrical pipes of AZ31, AZ61 and AZ80 magnesium alloys. The shape of pipe is 30mm in height, 16mm and 14mm in outer and inner diameters. The shot peening treatment was given on the surface of cylindrical pipe using an air-type peening machine. Plastic buckling strength test was performed under axial compression in a case of both ends with fixed condition, at several temperatures between 293K and 573K and at a crossh

APA, Harvard, Vancouver, ISO, and other styles

6

Doi, Taiga, Takashi Futatsugi, Michio Murase, Kosuke Hayashi, Shigeo Hosokawa, and Akio Tomiyama. "Countercurrent Flow Limitation at the Junction between the Surge Line and the Pressurizer of a PWR." Science and Technology of Nuclear Installations 2012 (2012): 1–10. http://dx.doi.org/10.1155/2012/754724.

Full text

Abstract:

An experimental study on countercurrent flow limitation (CCFL) in vertical pipes is carried out. Effects of upper tank geometry and water levels in the upper and lower tanks on CCFL characteristics are investigated for air-water two-phase flows at room temperature and atmospheric pressure. The following conclusions are obtained: (1) CCFL characteristics for different pipe diameters are well correlated using the Kutateladze number if the tank geometry and the water levels are the same; (2) CCFL occurs at the junction between the pipe and the upper tank both for the rectangular and cylindrical t

APA, Harvard, Vancouver, ISO, and other styles

7

Zinurov, V. E., A. V. Dmitriev, M. A. Ruzanova, and O. S. Dmitrieva. "Classification of bulk material from the gas flow in a device with coaxially arranged pipes." E3S Web of Conferences 193 (2020): 01056. http://dx.doi.org/10.1051/e3sconf/202019301056.

Full text

Abstract:

The paper deals with the problem of classification of bulk material, based on silica gel, larger than 30 µm, from dusty gas flow. In order to solve this problem, the design of a classifier with coaxially arranged pipes is proposed. According to the conducted studies, it is more efficient to use a classifier with an inner conical pipe to solve the problems of separating the particles from the gas flows of various sizes, since a greater value is achieved for the centrifugal, inertial, gravitational and other forces acting on the dusty flow, that contribute to knocking the particles out of its st

APA, Harvard, Vancouver, ISO, and other styles

8

Li, Bing, Yu Lan Wei, Dan Zhang, and Qing Huang. "Influence of Lumped Mass on the Natural Frequency of Cylindrical Pipe." Advanced Materials Research 532-533 (June 2012): 403–7. http://dx.doi.org/10.4028/www.scientific.net/amr.532-533.403.

Full text

Abstract:

The lumped mass on the cylindrical pipe affects the natural frequency of the cylindrical pipe. The first-three order natural frequencies and vibration modes of the cylindrical pipe with different lumped masses are analyzed by the bending vibration theory and finite element analysis, respectively. The results with different lumped masses are obtained by experiments. As shown in the results, the natural frequencies of the cylindrical pipe with lumped mass are lower than those without lumped mass. The greater the lumped mass is, the smaller the natural frequencies of the pipe are.

APA, Harvard, Vancouver, ISO, and other styles

9

Kim, Jae-Hee, Jae-Cheol Lee, and You-Rack Choi. "PiROB: Vision-based pipe-climbing robot for spray-pipe inspection in nuclear plants." International Journal of Advanced Robotic Systems 15, no. 6 (2018): 172988141881797. http://dx.doi.org/10.1177/1729881418817974.

Full text

Abstract:

Among many pipes in a nuclear power plant, the spray pipes in the reactor building are one of the most important pipes in view of their function and safety aspects. However, it is very difficult to manually reach and inspect the pipes for defects or damage, because these pipes are installed in very high places. To carry out this kind of inspection more easily, we developed a mobile robot to climb up and down and to cross over such pipes. A mobile robot should be small and light enough that it can be practically and safely operated in a nuclear power plant. Our robot is able to overcome obstacl

APA, Harvard, Vancouver, ISO, and other styles

10

Li, Bing, Yu Lan Wei, Qi Bo Yan, and Yue Zhan Wang. "Vibration Characteristics of a Containing Liquid Cylindrical Pipe with Lumped Mass." Applied Mechanics and Materials 184-185 (June 2012): 641–44. http://dx.doi.org/10.4028/www.scientific.net/amm.184-185.641.

Full text

Abstract:

The liquid within a cylindrical pipe affects the vibration characteristics of the pipe. Furthermore, these vibration characteristics are affected by lumped mass on the pipe. The natural frequencies and the vibration modes of the cylindrical pipe with different lumped masses can be obtained by finite element analysis. The natural frequencies of the containing liquid cylindrical pipe are obtained by experiments. The experimental results show that the natural frequencies of the containing liquid pipe are affected by the lumped mass. The greater the lumped mass is, the smaller the natural frequenc

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Cylindrical pipe"

1

Tribbe, Christian. "Gas/liquid flow in cylindrical and corrugated channels." Thesis, University of Surrey, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.244760.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Ozcakir, Ozge. "Vortex-Wave Solutions of Navier-Stokes Equations in a Cylindrical Pipe." The Ohio State University, 2014. http://rave.ohiolink.edu/etdc/view?acc_num=osu1388682148.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Basco, Scott William. "One Dimensional Approach to Modeling Damage Evolution of Galvanic Corrosion in Cylindrical Systems." University of Akron / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=akron1367489568.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Komminaho, Jukka. "Direct numerical simulation of turbulent flow in plane and cylindrical geometries." Doctoral thesis, Stockholm, 2000. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-3054.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Ghanbarpourgeravi, Morteza. "Investigation of Thermal Performance of Cylindrical Heatpipes Operated with Nanofluids." Doctoral thesis, KTH, Skolan för industriell teknik och management (ITM), 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-202566.

Full text

Abstract:

Nanofluids as an innovative class of heat transfer fluids created by dispersing nanometre-sizedmetallic or non-metallic particles in conventional heat transfer fluids displayed the potential toimprove the thermophysical properties of the heat transfer fluids. The main purpose of this study is toinvestigate the influence of the use of nanofluids on two-phase heat transfer, particularly on thethermal performance of the heat pipes. In the first stage, the properties of the nanofluids were studied,then, these nanofluids were used as the working fluids of the heat pipes. The thermal performance oft

APA, Harvard, Vancouver, ISO, and other styles

6

McVicker, William Richard. "An analytical approach to open, cylindrical organ-pipe scaling from a historical perspective with specific reference to the scaling practices of selected organ-builders." Thesis, Durham University, 1987. http://etheses.dur.ac.uk/1551/.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Salahifar, Raydin. "Analysis of Pipeline Systems Under Harmonic Forces." Thesis, Université d'Ottawa / University of Ottawa, 2011. http://hdl.handle.net/10393/19820.

Full text

Abstract:

Starting with tensor calculus and the variational form of the Hamiltonian functional, a generalized theory is formulated for doubly curved thin shells. The formulation avoids geometric approximations commonly adopted in other formulations. The theory is then specialized for cylindrical and toroidal shells as special cases, both of interest in the modeling of straight and elbow segments of pipeline systems. Since the treatment avoids geometric approximations, the cylindrical shell theory is believed to be more accurate than others reported in the literature. By adopting a set of consistent geom

APA, Harvard, Vancouver, ISO, and other styles

8

Charles, Antoine Henri Etienne. "Étude thermo-rhéologique de boues digérées : application à l’écoulement en conduite dans les procédés de méthanisation." Electronic Thesis or Diss., Ecole nationale supérieure Mines-Télécom Lille Douai, 2023. http://www.theses.fr/2023MTLD0008.

Full text

Abstract:

Le besoin en traitement des eaux usées par la société est assurée en usine d’épuration par des traitements menant à la production de boues. Afin d’anticiper l’augmentation de ce besoin à l’avenir, les filières de traitement de ces boues doivent atteindre une certaine efficacité, en termes de traitement et de valorisation des boues. Parmi ces filières, le procédé de méthanisation permet de réduire significativement le volume des boues générées et permet par la suite une valorisation agronomique et énergétique, sous forme de digestat, de biogaz, d’électricité ou de chaleur. Il est néanmoins limi

APA, Harvard, Vancouver, ISO, and other styles

9

Guo, Dongshan. "Pipe inspection by cylindrically guided waves." Diss., The University of Arizona, 2001. http://hdl.handle.net/10150/289714.

Full text

Abstract:

In this research the cylindrically guided wave inspection technique is proposed for detecting the anomalies in a pipe. Efficient inspection of pipelines for internal and external damages is a challenging task in the chemical and power industries where long pipelines are used and the pipes are coated by insulating materials. Under traditional methods insulation coatings are removed at selected places, then the pipe wall thickness at these spots is measured by ultrasonic transducers. This is a time-consuming and expensive operation since the operation requires point-to-point examination. Guided

APA, Harvard, Vancouver, ISO, and other styles

10

Shaul, Robert. "Wave forces on cylindrical piles and pile groups : a critical review." Master's thesis, University of Cape Town, 1990. http://hdl.handle.net/11427/8293.

Full text

Abstract:

Includes bibliography.<br>This thesis is a critical review of methods of predicting wave forces on vertical piles or groups of piles. It assigns different force prediction theories to different situations or flow regimes and analyses their advantages and disadvantages. The thesis is split into two sections: Section I reviewing the force prediction methods for single piles, and Section II for groups of piles.

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Cylindrical pipe"

1

Elecromagnetic Effects in Cylindrical Pipe Flow. Coronet Books, 1997.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Escudier, Marcel. Internal laminar flow. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780198719878.003.0016.

Full text

Abstract:

In this chapter it is shown that solutions to the Navier-Stokes equations can be derived for steady, fully developed flow of a constant-viscosity Newtonian fluid through a cylindrical duct. Such a flow is known as a Poiseuille flow. For a pipe of circular cross section, the term Hagen-Poiseuille flow is used. Solutions are also derived for shear-driven flow within the annular space between two concentric cylinders or in the space between two parallel plates when there is relative tangential movement between the wetted surfaces, termed Couette flows. The concepts of wetted perimeter and hydraul

APA, Harvard, Vancouver, ISO, and other styles

3

Zharkov's Handbook on Computer-Aided Design/Computer-Aided Engineering. Volume 7: Bending on Four-Roll Machines of Cylindrical Details from Sheets for Airframes of Rockets and Pipe Products. 1 Edition. Independently Published, 2019.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Cylindrical pipe"

1

Chaudhari, Aishwarya, Mangesh Borkar, Arvind Deshpande, Mandar Tendolkar, and Vivek K. Singh. "Numerical Investigation of Cylindrical Heat Pipe Performance." In Advances in Intelligent Systems and Computing. Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-1966-2_26.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Jain, Dinesh Kumar, and A. V. Deshpande. "Mathematical Modelling and Optimization of Cylindrical Heat Pipe." In Fluid Mechanics and Fluid Power, Volume 5. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-99-6074-3_50.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Nasir, Faiza Mohamed, Mohd Zulkifly Abdullah, and Fairosidi Idrus. "Thermal Analysis of a Cylindrical Sintered Wick Heat Pipe." In Advanced Structured Materials. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-05621-6_28.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Zhang, R., M. H. Evans, R. Worley, S. R. Anderson, and L. Mihaylova. "Improving SLAM in Pipe Networks by Leveraging Cylindrical Regularity." In Towards Autonomous Robotic Systems. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-89177-0_6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Xia, M., H. Takayanagi, and K. Kemmochi. "Stress Analysis of Lateral Compression for a Laminated Cylindrical Pipe." In Design and Manufacturing of Composites. CRC Press, 2021. http://dx.doi.org/10.1201/9781003076131-55.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Xian-Li, Li. "A CAD/CAM Program of Filament Winding on a Cylindrical Pipe." In Composite Structures 5. Springer Netherlands, 1989. http://dx.doi.org/10.1007/978-94-009-1125-3_38.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Vitaly, Miroshnikov. "Rotation of the Layer with the Cylindrical Pipe Around the Rigid Cylinder." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-18487-1_32.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Ramkumar, P., C. M. Vivek, P. Latha, and S. P. Manikandan. "Experimental and Heat Transfer Analysis Using Nanofluid in Cylindrical Heat Pipe Heat Exchanger." In 2nd International Conference on Smart Sustainable Materials and Technologies (ICSSMT 2023). Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-49826-8_9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Kolesnik, Marina. "On Vision-Based Orientation Method of a Robot Head in a Dark Cylindrical Pipe." In SOFSEM 2000: Theory and Practice of Informatics. Springer Berlin Heidelberg, 2000. http://dx.doi.org/10.1007/3-540-44411-4_25.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Nieuwstadt, F. T. M., Bing Ma, and Zhang Zhaoshun. "Numerical Simulation of the Evolution of Non-Axisymmetric Disturbances in Cylindrical Laminar Pipe Flow." In Fluid Mechanics and Its Applications. Springer Netherlands, 1998. http://dx.doi.org/10.1007/978-94-011-5118-4_44.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Cylindrical pipe"

1

Nagase, Jun-ya, and Yo Unno. "Cylindrical Elastic Crawler with Active Steering Using Sliders for Pipe Inspection." In 2024 10th IEEE RAS/EMBS International Conference for Biomedical Robotics and Biomechatronics (BioRob). IEEE, 2024. http://dx.doi.org/10.1109/biorob60516.2024.10719707.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Croll, S. G., and B. D. Keil. "Adhesion Measurements of Coatings on Cylindrical Steel Pipes: Variability & Significance." In SSPC 2014 Greencoat. SSPC, 2014. https://doi.org/10.5006/s2014-00011.

Full text

Abstract:

Abstract Quality assurance of coatings on steel water pipes commonly relies on tensile pull-off measurements of the coating-steel adhesion, according to ASTM D4541. These tests are performed by adhering a metal ‘dolly’ to the coating with an adhesive, then scoring around the dolly circumference, through the coating down to the steel surface, before recording the stress necessary to pull the dolly (and coating) away from the steel pipe. Usually, the adhesion value required accords with AWWA C222 but it may be specified higher, in the belief that higher values ensure that the coating will provid

APA, Harvard, Vancouver, ISO, and other styles

3

Kim, Dong-Jin, Sung-Woo Kim, Jong Yeon Lee, et al. "Effect of Weld, Orifice and Elbow on FAC Rate of SA106 Pipe." In CORROSION 2021. AMPP, 2021. https://doi.org/10.5006/c2021-16662.

Full text

Abstract:

Abstract A FAC (flow accelerated corrosion) test was performed for straight pipe composed of SA335 Gr P22 and SA106 Gr B (SA106-SA335-SA106) including a weld, as a function of the flow rate in the range of 7 to 12 m/s using the FAC demonstration test facility. Afterward, the experimental pipe was examined destructively to investigate any entrance and galvanic effects. In addition, the FAC rate obtained using a 50mm inner diameter (2 inch) pipe specimen was compared with the rate obtained from a rotating cylindrical electrode. The effect of the complicated fluid formed on the elbow and orifice

APA, Harvard, Vancouver, ISO, and other styles

4

Venu Madhav, H., Venkata Rauhavendra, Pramod Kumar, and Amrit Ambirajan. "Analytical Model for a Cylindrical Heat Pipe." In 2019 18th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm). IEEE, 2019. http://dx.doi.org/10.1109/itherm.2019.8757290.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Vaziri, A., H. Nayeb-Hashemi, and H. E. Estekanchi. "Dynamic Response of Cracked Cylindrical Shells With Internal Pressure." In ASME 2002 International Mechanical Engineering Congress and Exposition. ASMEDC, 2002. http://dx.doi.org/10.1115/imece2002-33582.

Full text

Abstract:

Sub-surface cracks in pipelines with internal pressure may severely affect their dynamic response. The extreme cases of these cracks are when these cracks go through the thickness of the pipes. Dynamic responses of cracked and un-cracked pipes with fixed ends and under various internal pressures were evaluated experimentally and theoretically. In the experimental part, the effects of pipe internal pressure on the resonant frequencies and damping of the pipe were evaluated. In the theoretical part, finite element analyses were performed to find dynamic response of pipes with various crack lengt

APA, Harvard, Vancouver, ISO, and other styles

6

Wang, Z., J. M. Ochterbeck, J. Perez, and P. Rogers. "STEADY STATE OPERATION OF CYLINDRICAL LOOP HEAT PIPE EVAPORATORS." In Annals of the Assembly for International Heat Transfer Conference 13. Begell House Inc., 2006. http://dx.doi.org/10.1615/ihtc13.p12.350.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Chakraborty, Soumya, Gary J. Saulnier, Kyle W. Wilt, Robert B. Litman, and Henry A. Scarton. "Low-rate ultrasonic communication axially along a cylindrical pipe." In 2014 IEEE International Ultrasonics Symposium (IUS). IEEE, 2014. http://dx.doi.org/10.1109/ultsym.2014.0135.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Roy, Pratit Sunder Dev, Koushik Das, and Hriday Mani Kalita. "Performance Enhancement of Cylindrical Heat Pipe using Tapered Wick." In Proceedings of the 27th National and 5th International ISHMT-ASTFE Heat and Mass Transfer Conference December 14-17, 2023, IIT Patna, Patna-801106, Bihar, India. Begellhouse, 2024. http://dx.doi.org/10.1615/ihmtc-2023.460.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Geng, J., and K. Thomas. "Reflection of Blast Waves Off Cylindrical Pipes." In ASME 2007 Pressure Vessels and Piping Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/pvp2007-26692.

Full text

Abstract:

In this paper, the interaction between a blast wave and an array of cylindrical objects (pipe or vessel) has been numerically investigated to evaluate blast load distribution around the objects. It was found that the interaction leads to a blast focusing within the gap between two adjacent pipes, and that the focused overpressure may exceed a fully reflected overpressure. This paper examines the effects of a combination of the arrangement of pipes (diameter, gap distance) and incident blast wave characteristic parameters (positive phase duration) on the focusing phenomena and the resultant bla

APA, Harvard, Vancouver, ISO, and other styles

10

Sudheer, S., and S. V. Prabhu. "Thermal Interaction Between a Circular Pipe and Diesel Pool Fire." In ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-88714.

Full text

Abstract:

Characterization of pool fires in the presence of cylindrical containers is highly relevant for various applications. A cylindrical container is idealized as a circular pipe packed with insulating material inside. Open pool fire experiments are conducted with a cylindrical container located at the center. The pool fire diameters considered were 0.5 m, 0.7 m and 1.0 m with diesel as the fuel. The cylindrical containers are made of stainless steel 304L. The outer diameters of the pipes are 114 mm, 168 mm and of thickness 8.6 mm, 7.1 mm respectively. The effect of blockage ratio on the mass burni

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Cylindrical pipe"

1

Sullivan, E. J., and J. V. Candy. Acoustic Propagation in a Water-Filled Cylindrical Pipe. Office of Scientific and Technical Information (OSTI), 2003. http://dx.doi.org/10.2172/15004932.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Yoosef-Ghodsi, Ozkan, and Bandstra. PR-244-114501-R01 Review of Compressive Strain Capacity Assessment Methods Final Report. Pipeline Research Council International, Inc. (PRCI), 2013. http://dx.doi.org/10.55274/r0010402.

Full text

Abstract:

Buried pipelines subjected to non-continuous ground movement such as frost heave, thaw settlement, slope instability and seismic movement experience high compressive strains that can cause local buckling (or wrinkling), in which the pipe wall buckles like a thin cylindrical shell in axial compression. In a strain-based design and assessment framework, excessive local buckling deformation that may cause loss of serviceability, or even pressure containment in some cases, is managed by limiting the strain demand below the strain limit. The determination of compressive strain limit is typically pe

APA, Harvard, Vancouver, ISO, and other styles

3

Singh, Niranjan. A Method of Sound Wave Diffusion in Motor Vehicle Exhaust Systems. Unitec ePress, 2017. http://dx.doi.org/10.34074/ocds.072.

Full text

Abstract:

It is common practice among young vehicle owners to modify the exhaust system of their vehicle to reduce exhaust backpressure with the perception that the output power increases. In the process of backpressure reduction, the output noise (Whakapau) of the vehicle also increases correspondingly. The conflict of interest that arises from modified vehicle exhaust systems and the general public is well publicised. This prototype was designed to meet the demands of exhaust back pressure reduction while at the same time mitigate the sound output of the vehicle. The design involves lining a cylindric

APA, Harvard, Vancouver, ISO, and other styles

4

Puglisi, M. INTRODUCTION TO FIELDS IN HOLLOW CYLINDRICAL PIPES AND CAVITY RESONATORS FOR RFQ (Part-1). Office of Scientific and Technical Information (OSTI), 1985. http://dx.doi.org/10.2172/1151137.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Boyle, M. Terrestrial vegetation monitoring at Congaree National Park: 2021 data summar. National Park Service, 2023. http://dx.doi.org/10.36967/2300302.

Full text

Abstract:

he Southeast Coast Network (SECN) conducts long-term terrestrial vegetation monitoring as part of the NPS Inventory and Monitoring Program. The vegetation community vital sign is one of the primary-tier resources identified by SECN park managers, and monitoring is conducted at 15 network parks (DeVivo et al. 2008). Monitoring plants and their associated communities over time allows for targeted understanding of ecosystems within the SECN geography, which provides managers information about the degree of change within their parks’ natural vegetation. 2021 marked the first year of conducting thi

APA, Harvard, Vancouver, ISO, and other styles

6

Boyle, M. Terrestrial vegetation monitoring at Ocmulgee Mounds National Historical Park: 2021 data summary. National Park Service, 2023. http://dx.doi.org/10.36967/2299748.

Full text

Abstract:

The Southeast Coast Network (SECN) conducts long-term terrestrial vegetation monitoring as part of the NPS Inventory and Monitoring Program. The vegetation community vital sign is one of the primary-tier resources identified by SECN park managers, and monitoring is conducted at 15 network parks (DeVivo et al. 2008). Monitoring plants and their associated communities over time allows for targeted understanding of ecosystems within the SECN geography, which provides managers information about the degree of change within their parks’ natural vegetation. 2021 marks the first year of conducting thi

APA, Harvard, Vancouver, ISO, and other styles

7

Boyle, Maxwell. Terrestrial vegetation monitoring at Canaveral National Seashore: 2022 data summary. National Park Service, 2024. http://dx.doi.org/10.36967/2303291.

Full text

Abstract:

The Southeast Coast Network (SECN) conducts long-term terrestrial vegetation monitoring as part of the NPS Inventory and Monitoring Program. The vegetation community vital sign is one of the primary-tier resources identified by SECN park managers, and monitoring is conducted at 15 network parks (DeVivo et al. 2008). Monitoring plants and their associated communities over time allows for targeted understanding of ecosystems within the SECN geography, which provides managers information about the degree of change within their parks? natural vegetation. 2022 marked the first year of conducting th

APA, Harvard, Vancouver, ISO, and other styles

8

Boyle, M. Terrestrial vegetation monitoring at Chattahoochee River National Recreation Area: 2021 data summary. National Park Service, 2024. http://dx.doi.org/10.36967/2303257.

Full text

Abstract:

The Southeast Coast Network (SECN) conducts long-term terrestrial vegetation monitoring as part of the NPS Inventory and Monitoring Program. The vegetation community vital sign is one of the primary-tier resources identi?ed by SECN park managers, and monitoring is conducted at 15 network parks (DeVivo et al. 2008). Monitoring plants and their associated communities over time allows for targeted understanding of ecosystems within the SECN geography, which provides managers information about the degree of change within their parks? natural vegetation. 2021 marked the ?rst year of conducting this

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!