Relevant bibliographies by topics / DC-DC Push-Pull Converter / Journal articles
To see the other types of publications on this topic, follow the link: DC-DC Push-Pull Converter.

Journal articles on the topic 'DC-DC Push-Pull Converter'

Author: Grafiati
Published: 8 September 2021
Last updated: 8 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'DC-DC Push-Pull Converter.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Valmir de Souza, Eduardo, and Ivo Barbi. "Bidirectional Flyback-push-pull Dc-dc Converter." Eletrônica de Potência 20, no. 2 (May 1, 2015): 195–204. http://dx.doi.org/10.18618/rep.2015.2.195204.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Jalbrzykowski, S., and T. Citko. "Push-pull resonant DC-DC isolated converter." Bulletin of the Polish Academy of Sciences: Technical Sciences 61, no. 4 (December 1, 2013): 763–69. http://dx.doi.org/10.2478/bpasts-2013-0082.

Full text
Abstract:
Abstract A new concept of a DC-DC converter with galvanic isolation is proposed in this paper. The converter belongs to the class E resonant converters controlled by pulse width modulation via frequency regulation (PWM FM). Due to the possibility of operation in the boost and buck modes, the converter is characterized by a high range of voltage gain regulation. The principle of converter operation described by mathematical equations is presented. The theoretical investigations are confirmed by p-spice model simulations and the measurement of an experimental model of 1kW laboratory prototype.
APA, Harvard, Vancouver, ISO, and other styles
3

Souza, Eduardo, Gierri Waltrich, and Ivo Barbi. "Bidirectional Dual Active Clamping Push-pull Dc-dc Converter." Eletrônica de Potência 21, no. 4 (December 1, 2016): 322–31. http://dx.doi.org/10.18618/rep.2016.4.2640.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Berrehil El Kattel, Menaouar, Robson Mayer, Maicon Douglas Possamai, and Sérgio Vidal Garcia Oliveira. "A BIDIRECTIONAL DC–DC PUSH-PULL / FLYBACK CONVERTER." Eletrônica de Potência 24, no. 1 (February 1, 2018): 85–94. http://dx.doi.org/10.18618/rep.2019.1.0020.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Yue, Gai Li, Rong Li, Chao Chen, and Xiao Long Wei. "Double-Loop Push-Pull Forward DC/DC Converter Control System." Applied Mechanics and Materials 130-134 (October 2011): 3365–69. http://dx.doi.org/10.4028/www.scientific.net/amm.130-134.3365.

Full text
Abstract:
With the continuous development of aviation technology, reliability requirements for air power is growing. As an important component, air static inverter air power has been studied extensively. In this paper, we study the following about the design of the front push-pull forward converter of Aeronautical Static Inverter: First, we design the Push-Pull Forward DC/DC converter control system on the basis of small-signal modeling; Secondly set control system parameters ; Finally, Through the simulation in MATLAB Simulink, we verify the design of the converter control parameter is reasonable, and then verify that Double-loop push-pull Forward DC/DC converter control system in the aviation static inverter is effectiveness.
APA, Harvard, Vancouver, ISO, and other styles
6

Devikala, S., and V. Sivachidambaranathan. "Modeling and Simulation of Artificial Neural Network Controlled Soft Switched Push–Pull DC to DC Converter." Journal of Computational and Theoretical Nanoscience 14, no. 1 (January 1, 2017): 585–90. http://dx.doi.org/10.1166/jctn.2017.6365.

Full text
Abstract:
This paper presents the performance of DC/DC Push–Pull converter for storage batteries. Some of the DC/DC converters are analyzed for finding their advantages and disadvantages. Moreover, a unique system based on a Push–Pull converter associated with an active filter and superior controller is chosen. The main advantage is the possibility to minimize the ripple at the output, decrease the switching power losses, increase the power conversion efficiency and improve the transient and steady state response. This paper proposes a new filter, control scheme and Artificial Neural Network (ANN) controlled Push–Pull DC/DC converter. Simulation was done using MATLAB Simulink and designed biasing for the PIC 16F84 microcontroller. The performance of the proposed system has been verified through a 1 kW prototype model of the system for a 15 KHz, 48/12 V DC for battery. The simulation results are validated with experimental results.
APA, Harvard, Vancouver, ISO, and other styles
7

Shao, Zhu Lei. "Analysis of Push-Pull DC/DC Converter by Poincare Mapping Graph." Applied Mechanics and Materials 536-537 (April 2014): 1489–92. http://dx.doi.org/10.4028/www.scientific.net/amm.536-537.1489.

Full text
Abstract:
Aiming at the problems of the choice of system parameters has great influence on stability of system in the push-pull DC/DC converter system. The relationship between system parameters and system stability was studied based on the push-pull DC/DC converter simulation model of MATLAB. Due to the push-pull DC/DC converter system is nonlinear, the system was analyzed by poincare mapping graph. This paper mainly analyzed the influence of the ratio of converter transformer on system stability. It is shown by simulation that the system operation state transferred from stable period to chaos, when the value of transformer ratio changed from 7 to 4. The study results are valuable for the design of switching power supply system parameters, and would have a wide application foreground.
APA, Harvard, Vancouver, ISO, and other styles
8

Yuan, You Chen, Yang Zhang, and Yu Wei Chen. "Current-Fed Flyback Push-Pull DC-DC Converter Based on Three-Phase Transformer." Applied Mechanics and Materials 614 (September 2014): 164–67. http://dx.doi.org/10.4028/www.scientific.net/amm.614.164.

Full text
Abstract:
Three-phase current-fed flyback push-pull dc-dc converter is proposed in this paper, which is a new circuit topology putting into practice based on current-fed flyback push-pull dc-dc converter. Structure is simplified; cost is cut down; efficiency and reliability are improved all by the high frequency three-phase transformer technique that carries out functions of flyback transformer as well as push-pull transformer at the same time. Three-phase transformer can be separated into relatively independent functions of flyback transformer and push-pull transformer with the reluctance produced by the magnetic gap in the central phase; the flyback transformer produces only common-mode flux in the magnetic circuit of push-pull transformer and does not influence its output signal; the magnetic flux in push-pull transformer is blocked by the magnetic gap and can only flow through the outer magnetic loop. Investigational device is designed; static and dynamic characteristics are observed and test results are verified by the experimentation.
APA, Harvard, Vancouver, ISO, and other styles
9

Shoyama, Masahito, and Koosuke Harada. "Dynamic characteristics of the push-pull dc-dc converter." Electronics and Communications in Japan (Part II: Electronics) 69, no. 5 (1986): 100–109. http://dx.doi.org/10.1002/ecjb.4420690512.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Babu, Samuel Rajesh. "Push-Pull Converter Fed Three-Phase Inverter for Residential and Motor Load." International Journal of Power Electronics and Drive Systems (IJPEDS) 6, no. 2 (June 1, 2015): 260. http://dx.doi.org/10.11591/ijpeds.v6.i2.pp260-267.

Full text
Abstract:
<p>The proposed paper is an new approach for power conditioning of a PV (photo-voltaic) cell array. The main objective is to investigate an approach to provide and improve the delivered electric energy by means of power conditioning structures with the use of alternative renewable resources (ARRs) for remote rural residential or industrial non-linear loads. This approach employs a series-combined connected boost and buck boost DC-DC converter for power conditioning of the dc voltage provided by a photo-voltaic array. The input voltage to the combined converters is 100 V provided from two series connected PV cells, which is converted and increased to 200 V at the dc output voltage. Series-combined connected boost and buck-boost DC-DC converters operate alternatively. This helps to reduce the input ripple current and provide the required 400 Vdc on a sinusoidal PWM three-phase inverter. Analysis of the two series-combined DC-DC converters is presented along with simulation results. Simulations of the series-combined DC-DC converters are presented with an output DC voltage of 200 V and a maximum output load of <em>Po </em>= 600 W.<em></em></p>
APA, Harvard, Vancouver, ISO, and other styles
11

Le, Phuong Minh, Dzung Quoc Phan, Huy Minh Nguyen, and Phong Hoai Nguyen. "Designing an uninterruptible power supply based on the high efficiency push–pull converter." Science and Technology Development Journal 16, no. 3 (September 30, 2013): 29–40. http://dx.doi.org/10.32508/stdj.v16i3.1610.

Full text
Abstract:
This paper presents an implementation of the DC/DC push–pull converter for an uninterruptible power supply (UPS). Some classical DC/DC converters are presented and analyzed for pointing out their advantages and drawbacks. Besides, an original system based on a push-pull converter associated with a dynamic modulation control is chosen. The main advantage is the possibility to control the delivered electric power in a wide range from very low level to high level of voltage within the same basic architecture. It can reduce the switching power losses and increase the power conversion efficiency. This paper proposed a new control scheme of the DC/DC converter and DC/AC inverter. The suggested system consists of a high efficiency DC/DC converter and a singlephase DC/AC inverter has been simulated using Matlab/Simulink and designed basing on the DSP TMS320F28027. Both results show high performances of the DC link and AC load voltages, when load changes from zero to rated. The performance of the proposed system has been verified through a 1kW prototype of the system for a 50 Hz/220-230 VAC load sourcing by two series connected batteries of 12V. The proposed DC/DC converter achieves a high efficiency of 93.0%. The system including the DC/DC converter and DC/AC inverter achieves an efficiency of 91.2% and Total Harmonic Distortion (THD) of AC load voltage reached 1.9%.
APA, Harvard, Vancouver, ISO, and other styles
12

Kwon, Min-Ho, Kook-In Han, Jung-Sung Park, and Se-Wan Choi. "A Bidirectional Three-phase Push-pull Zero-Voltage Switching DC-DC Converter." Transactions of the Korean Institute of Power Electronics 18, no. 4 (August 20, 2013): 403–11. http://dx.doi.org/10.6113/tkpe.2013.18.4.403.

Full text
APA, Harvard, Vancouver, ISO, and other styles
13

Rudenko, Yu V. "AVERAGING OF PUSH-PULL DC CONVERTER MODEL." Tekhnichna Elektrodynamika 2018, no. 1 (January 15, 2018): 37–46. http://dx.doi.org/10.15407/techned2018.01.037.

Full text
APA, Harvard, Vancouver, ISO, and other styles
14

Shoyama, Masahito, and Koosuke Harada. "Dynamic Characterstics of the Push-Pull DC to DC Converter." IEEE Transactions on Power Electronics PE-1, no. 1 (January 1986): 3–8. http://dx.doi.org/10.1109/tpel.1986.4766271.

Full text
APA, Harvard, Vancouver, ISO, and other styles
15

Ruiz-Caballero, D. A., and I. Barbi. "A new flyback-current-fed push-pull DC-DC converter." IEEE Transactions on Power Electronics 14, no. 6 (November 1999): 1056–64. http://dx.doi.org/10.1109/63.803399.

Full text
APA, Harvard, Vancouver, ISO, and other styles
16

Andersen, R. L., and I. Barbi. "A Three-Phase Current-Fed Push–Pull DC–DC Converter." IEEE Transactions on Power Electronics 24, no. 2 (February 2009): 358–68. http://dx.doi.org/10.1109/tpel.2008.2007727.

Full text
APA, Harvard, Vancouver, ISO, and other styles
17

Andreičiks, Aleksandrs, Kristaps Vitols, Oskars Krievs, and Ingars Steiks. "Current Fed Step-up DC/DC Converter for Fuel Cell Inverter Applications." Scientific Journal of Riga Technical University. Power and Electrical Engineering 25, no. 25 (January 1, 2009): 117–22. http://dx.doi.org/10.2478/v10144-009-0025-z.

Full text
Abstract:
Current Fed Step-up DC/DC Converter for Fuel Cell Inverter ApplicationsIn order to use hydrogen fuel cells in domestic applications either as main power supply or backup source, their low DC output voltage has to be matched to the level and frequency of the utility grid AC voltage. Such power converter systems usually consist of a DC-DC converter and a DC-AC inverter. Comparison of different current fed step-up DC/DC converters is done in this paper and a double inductor step-up push-pull converter investigated, presenting simulation and experimental results. The converter is elaborated for 1200 W power to match the rated power of the proton exchange membrane (PEM) fuel cell located in hydrogen fuel cell research laboratory of Riga Technical University.
APA, Harvard, Vancouver, ISO, and other styles
18

Górecki, Krzysztof, and Janusz Zarębski. "Electrothermal analysis of the self-excited push–pull DC–DC converter." Microelectronics Reliability 49, no. 4 (April 2009): 424–30. http://dx.doi.org/10.1016/j.microrel.2009.01.007.

Full text
APA, Harvard, Vancouver, ISO, and other styles
19

Ryan, M. J., W. E. Brumsickle, D. M. Divan, and R. D. Lorenz. "A new ZVS LCL-resonant push-pull DC-DC converter topology." IEEE Transactions on Industry Applications 34, no. 5 (1998): 1164–74. http://dx.doi.org/10.1109/28.720458.

Full text
APA, Harvard, Vancouver, ISO, and other styles
20

Costa, André Elias Lucena, and Romero Leandro Andersen. "High‐gain three‐phase current‐fed push–pull DC–DC converter." IET Power Electronics 13, no. 3 (February 2020): 545–56. http://dx.doi.org/10.1049/iet-pel.2019.0843.

Full text
APA, Harvard, Vancouver, ISO, and other styles
21

Lim, T. C., H. B. Zhang, B. W. Williams, S. J. Finney, and C. Croser. "Energy recovery snubber circuit for a dc–dc push–pull converter." IET Power Electronics 5, no. 6 (July 1, 2012): 863–72. http://dx.doi.org/10.1049/iet-pel.2011.0383.

Full text
APA, Harvard, Vancouver, ISO, and other styles
22

Deshmukh, Sangita H., Afsana Sheikh, Ms Medha Giri, and Dr D. R. Tutakne. "High Input Power Factor High Frequency Push-Pull DC/DC Converter." IOSR Journal of Electrical and Electronics Engineering 11, no. 04 (April 2016): 42–47. http://dx.doi.org/10.9790/1676-1104044247.

Full text
APA, Harvard, Vancouver, ISO, and other styles
23

Hote, Y. V., D. R. Choudhury, and J. Gupta. "Robust Stability Analysis of the PWM Push-Pull DC–DC Converter." IEEE Transactions on Power Electronics 24, no. 10 (October 2009): 2353–56. http://dx.doi.org/10.1109/tpel.2009.2014132.

Full text
APA, Harvard, Vancouver, ISO, and other styles
24

Larico, Hugo R. E., and Ivo Barbi. "Three-Phase Push–Pull DC–DC Converter: Analysis, Design, and Experimentation." IEEE Transactions on Industrial Electronics 59, no. 12 (December 2012): 4629–36. http://dx.doi.org/10.1109/tie.2011.2177609.

Full text
APA, Harvard, Vancouver, ISO, and other styles
25

Wang, Qin, Yuan Xu, and Lan Xiao. "Single-Primary-Winding Voltage-Fed Double-Input Push-Pull Converter." Advanced Materials Research 461 (February 2012): 241–45. http://dx.doi.org/10.4028/www.scientific.net/amr.461.241.

Full text
Abstract:
Multi-input push-pull converter with multiple-primary-winding is suitable in low and medium-power applications. However, with the increase of input sources, the number of the primary windings and switches increases as well. Based on Pulsating Voltage Source Cells (PVSCs) combination principle, this paper replaces the input voltage source of the single-input push-pull converter with the series or parallel-connected non-isolated pulsating voltage source cells (PVSCs). Thus a family of single-primary-winding (SPW) voltage-fed multi-input push-pull converters can be proposed. Compared with traditional multi-input converters, they have a form of single-Primary-Winding, and therefore we could greatly reduce the size and cost. Since the configuration of a double-input Buck dc/dc converter is very simple, it is chosen as an example in this paper to analysis this MIC. The operation principle and control strategy are illustrated. Finally, simulation and experimental results are presented to verify the correctness of theoretical analysis
APA, Harvard, Vancouver, ISO, and other styles
26

Nayak, Deepak Kumar, and S. Rama Reddy. "Comparison of the Synchronous-Rectified Push–Pull Converter with LLC DC to DC Converter." Arabian Journal for Science and Engineering 38, no. 4 (October 2, 2012): 913–26. http://dx.doi.org/10.1007/s13369-012-0365-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
27

Gorji, S. A., M. Ektesabi, and J. Zheng. "Isolated switched‐boost push–pull DC–DC converter for step‐up applications." Electronics Letters 53, no. 3 (February 2017): 177–79. http://dx.doi.org/10.1049/el.2016.4151.

Full text
APA, Harvard, Vancouver, ISO, and other styles
28

Andersen, Romero Leandro, and Ivo Barbi. "A ZVS-PWM Three-Phase Current-Fed Push–Pull DC–DC Converter." IEEE Transactions on Industrial Electronics 60, no. 3 (March 2013): 838–47. http://dx.doi.org/10.1109/tie.2012.2189539.

Full text
APA, Harvard, Vancouver, ISO, and other styles
29

Larico, Hugo Rolando Estofanero, and Ivo Barbi. "Three-Phase Flyback Push–Pull DC–DC Converter: Analysis, Design, and Experimentation." IEEE Transactions on Power Electronics 28, no. 4 (April 2013): 1961–70. http://dx.doi.org/10.1109/tpel.2012.2211037.

Full text
APA, Harvard, Vancouver, ISO, and other styles
30

Srinivasan, S., and Dr T. S. Sivakumaran. "Performance evaluation of multiple lift push-pull LUO converters for automotive applications." International Journal of Engineering & Technology 7, no. 2.20 (April 18, 2018): 174. http://dx.doi.org/10.14419/ijet.v7i2.20.12802.

Full text
Abstract:
Solar energy power generation has several advantages such as low maintenance costs; environment friendly, no rotating parts in construc-tion gives no noise. In recent years, solar power is used to charge the batteries of electric vehicles and instead of internal combustion En-gines the Electric motors such as DC motors, Brushless DC (BLDC) motors are used for driving the vehicles. The Multiple Lift Push-Pull Luo (MLPPL) converter is a DC-DC converter, which combines both switched capacitor and voltage lift techniques. Further, the MLPPL converters can be used in high power density, high power efficiency and voltage transfer gain applications. In this work, a MLPPL convert-er integrated with voltage source inverter (VSI) loading BLDC motor drive for automotive applications have been proposed. Further, the simulation of the proposed design has been carried out using MATLAB/Simulink Software. The torque of the BLDC motor has been varied and the performance of the MLPPL converter has been analyzed. Results demonstrate that the proposed design is capable to operate over a wide range of torque, which fulfills the application of Electric Vehicle.
APA, Harvard, Vancouver, ISO, and other styles
31

Deng, Yi, Jing Chen, Kai Yang, and Neng Cao. "Design of DC-DC Module for 300W Photovoltaic Inverter." Applied Mechanics and Materials 519-520 (February 2014): 1109–13. http://dx.doi.org/10.4028/www.scientific.net/amm.519-520.1109.

Full text
Abstract:
The DC-DC module is designed for the 300W Photovoltaic (PV) inverter with a former push-pull DC-DC boost. A UC3846 is applied to generate PWM signal. As the double-loop feedback, the output current and voltage are utilized in the circuit with the PID adjustment to improve the response speed. Finally, the simulation and experiment results are presented to illustrate the effectiveness of the proposed DC-DC converter.
APA, Harvard, Vancouver, ISO, and other styles
32

Ishida, Takeaki, and Katsuya Hirachi. "Magnetizing current ^|^amp; magnetic unsymmetrical phenomenon of push-pull type DC/DC converter." Journal of the Japan Institute of Power Electronics 38 (2012): 149–56. http://dx.doi.org/10.5416/jipe.38.149.

Full text
APA, Harvard, Vancouver, ISO, and other styles
33

Tian, Jianlong, and Patrick Hu. "Adjusting the frequency of an autonomous push–pull converter for wireless power transfer through a voltage-controlled variable capacitor structure." Wireless Power Transfer 4, no. 1 (February 16, 2017): 69–75. http://dx.doi.org/10.1017/wpt.2017.3.

Full text
Abstract:
This paper proposes a Voltage-controlled Variable Capacitor Structure (VVCS) to adjust the frequency of an autonomous push–pull converter. Unlike traditional switch mode capacitors or inductors where active switches are used, the equivalent capacitance of the VVCS varies with the on/off periods of a diode controlled by a DC voltage. The frequency of the autonomous push–pull converter can be controlled by this DC voltage when the VVCS is used as a variable resonant capacitor. As no active switching is involved in the VVCS, the circuit operates more smoothly than its switch mode counterpart so as to provide a simple way to adjust the operating frequency of the autonomous push–pull converter for high frequency and low electro magnetic interference operations. Mathematical model is developed for the relationship between the equivalent capacitance of the VVCS and the DC control voltage, and is verified by experimental results at more than 900 kHz with an approximately 12 W inductive power transfer system.
APA, Harvard, Vancouver, ISO, and other styles
34

Houreh, Amir, and Mohammad Ershadi. "Fuzzy Control of the Push-pull Fly-back Three-phase DC-DC Converter." Modelling, Measurement and Control A 92, no. 1 (March 31, 2019): 1–6. http://dx.doi.org/10.18280/mmc_a.920101.

Full text
APA, Harvard, Vancouver, ISO, and other styles
35

Sudev, Hima. "Soft Switching Three Phase Push-Pull DC-DC Converter using Space-Vector PWM." IOSR Journal of Engineering 03, no. 7 (July 2013): 01–08. http://dx.doi.org/10.9790/3021-03710108.

Full text
APA, Harvard, Vancouver, ISO, and other styles
36

Wu, Qunfang, Qin Wang, Jialin Xu, and Lan Xiao. "A Wide Load Range ZVS Push–Pull DC/DC Converter With Active Clamped." IEEE Transactions on Power Electronics 32, no. 4 (April 2017): 2865–75. http://dx.doi.org/10.1109/tpel.2016.2577639.

Full text
APA, Harvard, Vancouver, ISO, and other styles
37

Chu, Ching-Lung, and Chin-Nan Chien. "Series and parallel connection of ZVS–ZCS push–pull DC/DC converter module." Journal of the Chinese Institute of Engineers 35, no. 8 (December 2012): 1025–38. http://dx.doi.org/10.1080/02533839.2012.725907.

Full text
APA, Harvard, Vancouver, ISO, and other styles
38

Czarkowski, D., L. R. Pujara, and M. K. Kazimierczuk. "Robust stability of state-feedback control of PWM DC-DC push-pull converter." IEEE Transactions on Industrial Electronics 42, no. 1 (1995): 108–11. http://dx.doi.org/10.1109/41.345854.

Full text
APA, Harvard, Vancouver, ISO, and other styles
39

S, Athira, and Deepa Kaliyaperumal. "Modified Bidirectional Converter with Current Fed Inverter." International Journal of Power Electronics and Drive Systems (IJPEDS) 6, no. 2 (June 1, 2015): 387. http://dx.doi.org/10.11591/ijpeds.v6.i2.pp387-395.

Full text
Abstract:
A bidirectional dc-dc converter with multiple outputs are concatenated with a high frequency current source parallel resonant push pull inverter is presented in this paper. The two outputs are added together and it is taken as the input source for the inverter. The current source parallel resonant push pull inverter implemented here with high frequency applications like induction heating, Fluorescent lighting, Digital signal processing sonar. This paper proposes a simple photovoltaic power system consists of a bidirectional converter and a current fed inverter for regulating the load variations. Solar power is used as the input source for the system. Simulation of the proposed system is carried out in PSIM software and experimentally verified the results.
APA, Harvard, Vancouver, ISO, and other styles
40

Andreičiks, A., I. Steiks, and O. Krievs. "Design of Current Source Dc/Dc Converter for Interfacing a 5 Kw Pem Fuel Cell / Paaugstinošā Strāvas Avota Līdzsprieguma Pārveidotāja Izstrāde 5 Kw Ūdeņraža Degvielas Elementam." Latvian Journal of Physics and Technical Sciences 50, no. 4 (August 1, 2013): 14–21. http://dx.doi.org/10.2478/lpts-2013-0022.

Full text
Abstract:
Abstract In domestic applications the low DC output voltage of a hydrogen fuel cell used as the main power supply or a backup power source has to be matched to the level and frequency of the AC voltage of utility grid. The interfacing power converter system usually consists of a DC/DC converter and an inverter. In this work, a DC/DC step-up converter stage is designed for interfacing a 5kW proton exchange membrane (PEM) fuel cell. The losses of DC/DC conversion are estimated and, basing on the relevant analysis, the most appropriate configuration of converter modules is selected for a DC/DC converter stage of increased efficiency. The authors present the results of experimental analysis and simulation for the selected configuration of four double inductor step-up push-pull converter modules
APA, Harvard, Vancouver, ISO, and other styles
41

Andreiciks, Aleksandrs, Ingars Steiks, and Oskars Krievs. "Current-fed Step-up DC/DC Converter for Fuel Cell Applications with Active Overvoltage Clamping." Scientific Journal of Riga Technical University. Power and Electrical Engineering 27, no. 1 (January 1, 2010): 116–21. http://dx.doi.org/10.2478/v10144-010-0032-0.

Full text
Abstract:
Current-fed Step-up DC/DC Converter for Fuel Cell Applications with Active Overvoltage ClampingIn order to use hydrogen fuel cells in domestic applications either as main power supply or backup source, their low DC output voltage has to be matched to the level and frequency of the utility grid AC voltage. Such power converter systems usually consist of a DC-DC converter and a DC-AC inverter. A double inductor step-up push-pull converter is investigated in this paper, presenting simulation and experimental results for passive and active overvoltage clamping. The prototype of the investigated converter is elaborated for 1200 W power to match the rated power of the proton exchange membrane (PEM) fuel cell located in hydrogen fuel cell research laboratory.
APA, Harvard, Vancouver, ISO, and other styles
42

Tseng, Kuo-Ching, I.-Chien Li, and Chun-An Cheng. "Integrated Buck and Modified Push−Pull DC−DC Converter With High Step-Down Ratio." IEEE Transactions on Industrial Electronics 67, no. 1 (January 2020): 235–43. http://dx.doi.org/10.1109/tie.2019.2897536.

Full text
APA, Harvard, Vancouver, ISO, and other styles
43

Xu, Jialin, Qunfang Wu, and Yu Wang. "Magnetising‐current‐assisted wide ZVS range push–pull DC/DC converter with reduced circulating energy." IET Power Electronics 11, no. 2 (February 2018): 272–79. http://dx.doi.org/10.1049/iet-pel.2016.1016.

Full text
APA, Harvard, Vancouver, ISO, and other styles
44

Kala, S. Devi, and P. Nirmal Kumar. "Experimental verification on reduction of EMI in ZVS push-pull DC to DC converter system." i-manager's Journal on Electronics Engineering 3, no. 1 (November 15, 2012): 1–6. http://dx.doi.org/10.26634/jele.3.1.2033.

Full text
APA, Harvard, Vancouver, ISO, and other styles
45

Lin, F. J., R. J. Wai, and C. C. Lee. "Fuzzy neural network position controller for ultrasonic motor drive using push–pull DC–DC converter." IEE Proceedings - Control Theory and Applications 146, no. 1 (January 1, 1999): 99–107. http://dx.doi.org/10.1049/ip-cta:19990378.

Full text
APA, Harvard, Vancouver, ISO, and other styles
46

Hote, Yogesh V. "A new approach to time domain analysis of perturbed PWM push-pull DC-DC converter." Journal of Control Theory and Applications 10, no. 4 (November 2012): 465–69. http://dx.doi.org/10.1007/s11768-012-0064-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
47

Nugraha, Syechu Dwitya, Ony Asrarul Qudsi, and Diah Septi Yanaratri. "IMPLEMENTASI CURRENT FED PUSH PULL CONVERTER MENGGUNAKAN KONTROL PI PADA APLIKASI RUMAH MANDIRI." INOVTEK POLBENG 8, no. 1 (August 8, 2018): 67. http://dx.doi.org/10.35314/ip.v8i1.285.

Full text
Abstract:
Aplikasi dari pemanfaatan energi matahari adalah sebuah mikrogrid skala rumah. Pada mikrogrid khususnya menggunakan panel surya atau photovoltaic (PV) sebagai sumber energi utama. Pada aplikasinya tegangan keluaran dari PV dinaikkan atau diturunkan dengan DC-DC konverter. Akan tetapi permasalahan yang terjadi adalah daya atau tegangan keluaran dari PV mudah berubah terhadap irradiasi matahari sehingga perlu dinaikkan dengan rating kelipatan tegangan yang tinggi mencapai 400 V untuk suplai DC bus bar. Maka dari itu pada penelitian ini akan mengaplikasikan Current Fed Push Pull Converter dengan menggunakan kontrol PI yang dapat menaikkan tegangan masukan yang bernilai 70V - 95 V menjadi 400 V dan distabilkan menggunakan metode PI. Dari hasil implementasi, sistem mampu menaikkan tegangan keluaran 400 V dan menjaga tegangan tersebut tetap stabil walaupun tegangan masukannya berubah-ubah
APA, Harvard, Vancouver, ISO, and other styles
48

Wu, Qunfang, Qin Wang, Jialin Xu, and Zilong Xu. "Active‐clamped ZVS current‐fed push–pull isolated dc/dc converter for renewable energy conversion applications." IET Power Electronics 11, no. 2 (February 2018): 373–81. http://dx.doi.org/10.1049/iet-pel.2017.0144.

Full text
APA, Harvard, Vancouver, ISO, and other styles
49

Tarzamni, Hadi, Ebrahim Babaei, Farhad Panahandeh Esmaeelnia, Payman Dehghanian, Sajjad Tohidi, and Mohammad Bagher Bannae Sharifian. "Analysis and Reliability Evaluation of a High Step-Up Soft Switching Push–Pull DC–DC Converter." IEEE Transactions on Reliability 69, no. 4 (December 2020): 1376–86. http://dx.doi.org/10.1109/tr.2019.2945413.

Full text
APA, Harvard, Vancouver, ISO, and other styles
50

Li, Shouxiang, Kang Xiangli, and Keyue Ma Smedley. "A Control Map for a Bidirectional PWM Plus Phase-Shift-Modulated Push–Pull DC–DC Converter." IEEE Transactions on Industrial Electronics 64, no. 11 (November 2017): 8514–24. http://dx.doi.org/10.1109/tie.2017.2703674.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography