Relevant bibliographies by topics / DC motor protection using LabVIEW

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Book chapters
  4. Conference papers

Academic literature on the topic 'DC motor protection using LabVIEW'

Author: Grafiati
Published: 2 June 2025
Last updated: 19 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'DC motor protection using LabVIEW.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "DC motor protection using LabVIEW"

1

Aziz, Ahmad*, Kalra Sanjay, and Anwar Shahzad Siddique Dr. "ULTRA HIGH SPEED PROTECTION AND SPEED CONTROL SYSTEM OF DC MOTOR USING LABVIEW." INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY 5, no. 3 (2016): 475–81. https://doi.org/10.5281/zenodo.47609.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Than, Myint Kyi, and Zin Latt Kyaw. "Camera Movement Control using PID Controller in LabVIEW." International Journal of Trend in Scientific Research and Development 3, no. 5 (2019): 519–23. https://doi.org/10.5281/zenodo.3590815.

Full text
Abstract:
The aim of this system is to show how position of the dc motor can be controlled by using PID algorithm in LabVIEW for camera movement. Arduino microcontroller board is used to control the DC motor. L298N dual H Bridge motor driver is used to drive the DC motor and to execute the pulse width modulation PWM signal. Proportional Integral Derivative PID is the most common control algorithm used in industrial applications and other control system. DC motor will be interfaced with LabVIEW using an Arduino Uno microcontroller. The position of the DC motor will be set by creating a Graphic User Inter
APA, Harvard, Vancouver, ISO, and other styles
3

Dr., M. Shanmugavalli, M. Mathangini, M. Praveena, and N. R. Kaavya. "Control of DC Motor using LabVIEW." International Journal of Multidisciplinary Research Transactions 7, no. 3 (2025): 29–40. https://doi.org/10.5281/zenodo.15046941.

Full text
Abstract:
This paper presents an in-depth study of servo motor using the NI myRIO platform and LabVIEW software, Servo motors are widely used in automation, robotics, and control systems, requiring precise position control. The NI myRIO, a reconfigurable embedded devise, facilities real-time control applications through LabVIEW’s graphical programming interface. The project demonstrates the implementation of a Pulse Width Modulation (PWM) signal to drive a (NAME) servo motor. The methodology includes setting up NI myRIO designing the LabVIEW virtual instrument, and analysing the system’s res
APA, Harvard, Vancouver, ISO, and other styles
4

Singh, Abhay Kumar, and Shabbiruddin. "An Efficient Method for Motor Protection System Control Using Labview." International Journal of Measurement Technologies and Instrumentation Engineering 4, no. 1 (2014): 43–50. http://dx.doi.org/10.4018/ijmtie.2014010103.

Full text
Abstract:
The need for a motor protection system can be well understood by the fact that motors are integral device in any of the present day industries. Malfunctioning or any other faults in motor can halt the functioning of such industries. This can cause huge financial losses. So an efficient motor protection system is necessary. The present research work deals with the application of Labview for motor protection system, which can constantly monitor and control, a large motor system. This paper presents a highly reliable approach towards protection of commonly used motors. Here we deal with different
APA, Harvard, Vancouver, ISO, and other styles
5

Wiriawan, Alifa Restu Janwar. "Motor DC Speed Adjustment By Propotional Integral Derivative (PID) Based on LabView." Telekontran : Jurnal Ilmiah Telekomunikasi, Kendali dan Elektronika Terapan 4, no. 2 (2016): 13–24. http://dx.doi.org/10.34010/telekontran.v4i2.1886.

Full text
Abstract:
Abstract - DC motors are widely used in small and large industries. DC motor speed is often unstable due to outside interference and changes in the parameters of the fabrication so it is necessary to design a controller. Motor DC speed adjustment and monitoring is a crucial system as it i implemented in industrial. This motor DC speed adjustment and monitoring using computer interface where in industial this system will support operator for adjusting and monitoring motor speed. For acquiring best control parameters, tuning is needed for acquiring best Proportional Integral Derivative(PID) valu
APA, Harvard, Vancouver, ISO, and other styles
6

Gupta, Sharad. "Speed and Position Control of DC Motor using LabVIEW." International Journal for Research in Applied Science and Engineering Technology 9, no. VIII (2021): 111–16. http://dx.doi.org/10.22214/ijraset.2021.37286.

Full text
Abstract:
New applications requiring both speed and position control have emerged as a result of technological advancements. In many applications, a DC motor's speed and position can be adjusted. The PID controller controls the speed and position of individually stimulated DC motors. Using LabVIEW software, this study attempts to control the speed and position of a DC motor as well as calculate the closed loop system model. Nonlinearity in any system has undesirable implications in normal operation. Unwanted outcomes including dead zones, saturation, and system reaction.
APA, Harvard, Vancouver, ISO, and other styles
7

Ruszewski, Andrzej, and Andrzej Sobolewski. "Position control of DC motor using fractional order controller." Archives of Electrical Engineering 62, no. 3 (2013): 505–16. http://dx.doi.org/10.2478/aee-2013-0041.

Full text
Abstract:
Abstract The paper presents the problem of position control of DC motor with rated voltage 24 V loaded by flywheel. The fractional order PD controller implemented in National Instruments NI ELVIS II programmed in LabView is used for controlling. The simple method for determining stability regions in the controller parameters space is given. Knowledge of these regions permits tuning of the controller and ensures required the phase margin of the system
APA, Harvard, Vancouver, ISO, and other styles
8

Reddy, Chityala Revanth Kumar. "Integrating Step Motor Movement Half-Step and Full-Step by Labview." International Journal for Research in Applied Science and Engineering Technology 9, no. VI (2021): 2063–66. http://dx.doi.org/10.22214/ijraset.2021.35452.

Full text
Abstract:
This paper represents the performance of placement control of step motor (Brushless DC electric motor) using LabVIEW. Step motors are Applicable in many industries and factories where accurate control of motor position is necessary. In this work, half step and full step manner of step motor control is implemented. The experiment outcome show that half step manner makes an angle of 0.6 degree per step (300 steps), considering full step makes 1.2 degree per step (150 steps). With LabVIEW the arrangement has friendly communication, better control result and uncomplicated control in both ways.
APA, Harvard, Vancouver, ISO, and other styles
9

Firmansyah, Rifqi, Muhammad Badruddin A. M., Mochamad Masnur K., et al. "DC Motor Speed Control using Particle Swarm Optimization based on Labview." JEEE-U (Journal of Electrical and Electronic Engineering-UMSIDA) 8, no. 2 (2024): 111–21. http://dx.doi.org/10.21070/jeeeu.v8i2.1701.

Full text
Abstract:
In Industrial applications, DC motors are commonly applied because of high reliability, ease of control and ability to provide accurate speed. However, to get accurate speed control under several operation conditions such as disturbances and changes in the load is significant challenge. This research explores the implementation of particle swarm optimization (PSO) to tune parameters of proportional-integral (PI) controller. PSO that is a population-based optimization technique, is inspired by the social behavior of swarms. It is a population-based optimization technique. By automation process
APA, Harvard, Vancouver, ISO, and other styles
10

FAKHRUDDIN, HANIF HASYIER, HANDRI TOAR, ERA PURWANTO, HARY OKTAVIANTO, RADEN AKBAR NUR APRIYANTO, and ANGGA WAHYU ADITYA. "Kendali Kecepatan Motor Induksi 3 Fase Berbasis Particle Swarm Optimization (PSO)." ELKOMIKA: Jurnal Teknik Energi Elektrik, Teknik Telekomunikasi, & Teknik Elektronika 8, no. 3 (2020): 477. http://dx.doi.org/10.26760/elkomika.v8i3.477.

Full text
Abstract:
ABSTRAKMotor induksi secara struktur dan kendali standarnya dirancang untuk bekerja pada kecepatan nominal, sehingga sulit mengendalikan kecepatan sesuai kebutuhan karena akan mengubah konstruksi motor. Penelitian tentang pengendalian motor induksi agar semudah mengendalikan motor DC sudah banyak dilakukan oleh peneliti, salah satunya adalah dengan kendali skalar. Kendali skalar banyak digunakan karena memiliki keunggulan sederhana, biaya murah, mudah didesain dan diimplementasikan, serta yang paling penting tidak memerlukan parameter dari motor induksi. Penggunaan kendali skalar yang telah di
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "DC motor protection using LabVIEW"

1

Groen, Benjamin Carson. "Investigation of DC Motors for Electric and Hybrid Electric Motor Vehicle Applications Using an Infinitely Variable Transmission." BYU ScholarsArchive, 2011. https://scholarsarchive.byu.edu/etd/2696.

Full text
Abstract:
Since the early 1900's demand for fuel efficient vehicles has motivated the development of electric and hybrid electric vehicles. Unfortunately, some components used in these vehicles are expensive and complex. AC motors, complex electronic controllers and complex battery management systems are currently used in electric (EV) and hybrid vehicles. This research examines various motors and speed control methods in an attempt to help designers identify which motors would be best suited for an EV powertrain application. The feasibility of using DC motors coupled with an Infinitely Variable Transmi
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "DC motor protection using LabVIEW"

1

Banumalar, K., and N. Vanaja. "Performance Analysis of Controllers in DC Motor Using LABVIEW." In Lecture Notes in Electrical Engineering. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-5866-1_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Rodriguez Serrezuela, Ruthber, Jorge Luis Aroca Trujillo, Roberto Sagaro Zamora, and Vadim Azhmyakov. "Start-Up of a PID Fuzzy Logic-Embedded Control System for the Speed of a DC Motor Using LabVIEW." In Electric Machines for Smart Grids Applications - Design, Simulation and Control. IntechOpen, 2018. http://dx.doi.org/10.5772/intechopen.76364.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kanthi, M. "Fuzzy Logic-Based Intelligent Control System for Active Ankle Foot Orthosis." In Fuzzy Systems. IGI Global, 2017. http://dx.doi.org/10.4018/978-1-5225-1908-9.ch050.

Full text
Abstract:
The Ankle Foot Orthosis (AFO) is an orthotic device intended to assist or to restore the movements of the ankle foot complex in the case of pathological gait. Active AFO consists of sensor, controller, and actuator. The controller used in the conventional AFO to control the actuator does not use the property of synchronization of the feet. This chapter deals with development of a fuzzy-based intelligent control unit for an AFO using property of symmetry in the foot movements. The control system developed in LabVIEW provides real-time control of the defective foot by continuously monitoring the gait patterns. The input signals for the control system are generated by the sensor system having gyroscope. DC motor is used as an actuator. The data acquisition for Gait Analysis is done using National Instrument's data acquisition system DAQ6221 interfaced with a gyro-sensor.
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "DC motor protection using LabVIEW"

1

Verma, Pratyush, G. Gokulakrishnan, and K. Sathishkumar. "Continuous Monitoring of DC Motor using LabVIEW." In 2019 Innovations in Power and Advanced Computing Technologies (i-PACT). IEEE, 2019. http://dx.doi.org/10.1109/i-pact44901.2019.8960120.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Jishnu, Rajagopal K. P., and T. Ananthan. "Online System Identification of DC Motor Using LabVIEW-myRIO." In 2018 International Conference on Inventive Research in Computing Applications (ICIRCA). IEEE, 2018. http://dx.doi.org/10.1109/icirca.2018.8597260.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Zhi-Hao, Wang, Hendrick, Kung Yu-Fan, Chan Chuan-Te, Lin Shi-Hao, and Jong Gwo-Jia. "Controlling DC motor using eye blink signals based on LabVIEW." In 2017 5th International Conference on Electrical, Electronics and Information Engineering (ICEEIE). IEEE, 2017. http://dx.doi.org/10.1109/iceeie.2017.8328763.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Thepsatorn, P., A. Numsomran, V. Tipsuwanporn, and T. Teanthong. "DC Motor Speed Control using Fuzzy Logic based on LabVIEW." In 2006 SICE-ICASE International Joint Conference. IEEE, 2006. http://dx.doi.org/10.1109/sice.2006.314890.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Rane, Harshatej K., and S. K. Parchandekar. "A web-based monitoring and control of DC motor using LabVIEW environment." In 2015 International Conference on Smart Technologies and Management  for Computing, Communication, Controls, Energy and Materials (ICSTM). IEEE, 2015. http://dx.doi.org/10.1109/icstm.2015.7225476.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Angalaeswari, S., Amit Kumar, Divyanshu Kumar, and Shubham Bhadoriya. "Speed control of permanent magnet (PM)DC motor using Arduino and LabVIEW." In 2016 IEEE International Conference on Computational Intelligence and Computing Research (ICCIC). IEEE, 2016. http://dx.doi.org/10.1109/iccic.2016.7919599.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Gasparesc, Gabriel. "PID control of a DC motor using Labview Interface for Embedded Platforms." In 2016 12th IEEE International Symposium on Electronics and Telecommunications (ISETC). IEEE, 2016. http://dx.doi.org/10.1109/isetc.2016.7781078.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Liu, Jianying, Pengju Zhang, and Fei Wang. "Real-Time DC Servo Motor Position Control by PID Controller Using Labview." In 2009 International Conference on Intelligent Human-Machine Systems and Cybernetics. IEEE, 2009. http://dx.doi.org/10.1109/ihmsc.2009.59.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Tharakan, Vineetha John, and Jai Prakash Prasad. "Speed Control of the DC Motor through Temperature Variations using Labview and Aurdino." In Third International Conference on Current Trends in Engineering Science and Technology ICCTEST-2017. Grenze Scientific Society, 2017. http://dx.doi.org/10.21647/icctest/2017/49025.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Asha, K. R., P. Suhada Tasleem, A. V. Ravi Kumar, S. Mallikarjuna Swamy, and K. R. Rekha. "Real Time Speed Control of a DC Motor by Temperature Variation Using LabVIEW and Arduino." In 2017 International Conference on Recent Advances in Electronics and Communication Technology (ICRAECT). IEEE, 2017. http://dx.doi.org/10.1109/icraect.2017.50.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'DC motor protection using LabVIEW' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography