Relevant bibliographies by topics / Deep drawing tool

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Deep drawing tool'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Deep drawing tool.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Deep drawing tool"

1

Hazrati, J., P. Stein, P. Kramer, and A. H. van den Boogaard. "Tool Texturing for Deep Drawing Applications." IOP Conference Series: Materials Science and Engineering 418 (September 21, 2018): 012095. http://dx.doi.org/10.1088/1757-899x/418/1/012095.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Böhm, Timo, and Thomas Meurer. "Trajectory Planning For a Deep Drawing Tool." IFAC Proceedings Volumes 47, no. 3 (2014): 665–70. http://dx.doi.org/10.3182/20140824-6-za-1003.01565.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Bergweiler, Georg, Falko Fiedler, Ahsan Shaukat, and Bernd Löffler. "Experimental Investigation of Dimensional Precision of Deep Drawn Cups Using Direct Polymer Additive Tooling." Journal of Manufacturing and Materials Processing 5, no. 1 (2020): 3. http://dx.doi.org/10.3390/jmmp5010003.

Full text
Abstract:
While deep drawing of sheet metals is economical at high volumes, it can be very costly for manufacturing prototypes, mainly due to high tooling costs. Additively manufactured polymer tools have the potential to be more cost-efficient for small series, but they are softer and thus less resilient than conventional steel tools. This work aimed to study the dimensional precision of such tools using a standard cup geometry. Tools were printed with FFF using two different materials, PLA and CF-PA. A test series of 20 parts was drawn from each tool. Afterwards, the dimensional precisions of the draw
APA, Harvard, Vancouver, ISO, and other styles
4

Jalanesh, Masood, Andre Miller, Marco Hehmann, André Spiekermeier, Sven Hübner, and Bernd Arno Behrens. "Process-Integrated Projection Welding during Deep Drawing." Advanced Materials Research 1140 (August 2016): 59–66. http://dx.doi.org/10.4028/www.scientific.net/amr.1140.59.

Full text
Abstract:
Within deep drawing processes, welding represents an innovative approach to optimising the branched process chains which entail uneconomic process steps in production and transport lines. Previous applications of thermal joining processes in presses required a downstream process step for joining standardised functional elements such as nuts. Within the scope of this publication, a weldable tool system is presented which offers the possibility of welding a deep drawing component to an automatically added non-standardised holder in a single-step deep drawing process without additional dwell time
APA, Harvard, Vancouver, ISO, and other styles
5

Heo, Young Moo, Jong Deok Kim, and Yong Jun Jeon. "Study on Friction Characteristics According to Drawing Variables in Press Drawing Process." Advanced Materials Research 680 (April 2013): 440–45. http://dx.doi.org/10.4028/www.scientific.net/amr.680.440.

Full text
Abstract:
Friction is generated between a press tool and a material during the inflow of material in an automotive press drawing process. Currently, there is deficienttechnical information on such tool-material friction properties. This study is accordingly aimed to understand friction characteristics by investigating them from drawing variables in the press deep-drawing process for steel plates of 590MPa grade and above that are recently being applied for the reduction of weight and improvement of safety of automobiles. The drawing variables in this study are blank holder holding pressure, drawing velo
APA, Harvard, Vancouver, ISO, and other styles
6

Flosky, H., and Frank Vollertsen. "Wear Behavior of a DLC-Coated Blanking and Deep Drawing Tool Combination." Key Engineering Materials 549 (April 2013): 511–17. http://dx.doi.org/10.4028/www.scientific.net/kem.549.511.

Full text
Abstract:
In macro forming a DLC-coating can increase durability and decrease wear of a deep drawing tool. Due to size effects, the behavior in micro range can differ from the behavior in macro range. To investigate durability and wear in micro deep drawing a blanking and deep drawing tool combination was developed, capable of maximum stroke rate of 200 parts per minute. Experiments with copper foil (E-Cu58) of 0.05 mm thickness were performed to produce cylindrical micro cups with a diameter of 1 mm using the lubricant Lubrimax Edel C. The tool material is stainless steel (German standard 1.2379). The
APA, Harvard, Vancouver, ISO, and other styles
7

Behrens, G., F. O. Trier, H. Tetzel, and F. Vollertsen. "Influence of tool geometry variations on the limiting drawing ratio in micro deep drawing." International Journal of Material Forming 9, no. 2 (2015): 253–58. http://dx.doi.org/10.1007/s12289-015-1228-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Paćko, M., M. Dukat, T. Śleboda, and M. Hojny. "The Analysis of Multistage Deep Drawing of AA5754 Aluminum Alloy." Archives of Metallurgy and Materials 55, no. 4 (2010): 1173–84. http://dx.doi.org/10.2478/v10172-010-0021-5.

Full text
Abstract:
The Analysis of Multistage Deep Drawing of AA5754 Aluminum AlloyThis work is focused on the multistage deep drawing of AA5754 aluminum alloy box-type part with flange. Both experimental and numerical analysis were performed in this study to predict causes of contraction and cracking occurring in deformed product in respect to the changes of friction conditions on tool-drawn part contact surface. The numerical simulations were performed using eta/DYNAFORM software and LS-DYNA® solver. The research showed, that the results of the simulation are in very good agreement with the results of the real
APA, Harvard, Vancouver, ISO, and other styles
9

Behrens, Gerrit, and Frank Vollertsen. "Influence of Tool Geometry Variation on the Punch Force in Micro Deep Drawing." Key Engineering Materials 554-557 (June 2013): 1306–11. http://dx.doi.org/10.4028/www.scientific.net/kem.554-557.1306.

Full text
Abstract:
Micro forming processes are very well suited for manufacturing of small metal parts in large quantities and micro deep drawing provides a great application potential for the manufacturing of parts with complex shapes. But size effects like changed tribology and material properties usually result in smaller process windows for micro forming operations. Process caused wear as well as large inaccuracy in manufacturing of micro forming tools is responsible for geometrical deviation of the tools from nominal size. Both influences can have essential impact on the process window size and process stab
APA, Harvard, Vancouver, ISO, and other styles
10

Voges-Schwieger, Kathrin, Sven Hübner, and Bernd Arno Behrens. "Enhancing Deep Drawing Processes by Using a Thermomechanical Tool Design." Key Engineering Materials 410-411 (March 2009): 595–600. http://dx.doi.org/10.4028/www.scientific.net/kem.410-411.595.

Full text
Abstract:
The nature of phase transformation in metastable austenitic steels due to strain- induced ’-martensite formation is used as new contribution to lightweight construction in crash safety applications. A thermomechanical tool design was developed to enhance the ’-martensite evolution in local areas. Draw and stop beads allow a concerted stretch-out of material by increasing true strain . The local warming of defined regions avoids the phase transformation to retain the original austenitic lattice while a regional cooling enforce this nature by realizing a constant true strain .
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Deep drawing tool"

1

Rérych, Pavel. "Optimalizace výroby součásti na hlubokotažném lisu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-402503.

Full text
Abstract:
The diploma thesis present technology production of draining outlet. This is a rectangular deep drawn part, where basic shape is formed in two towing operations now. The used material is an austenitic stainless steel 17 240 with thickness 1 mm. According to the entry documentation the production technology was not change – current technology (it means drawing without thinning the wall) is most suitable. Based on technological and control calculations two-operations production was determined, which will take place in the united conventional instrument. The hydraulic press with marking Dieffenba
APA, Harvard, Vancouver, ISO, and other styles
2

Staněk, Vojtěch. "Optimalizace procesu výroby vpusti." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230095.

Full text
Abstract:
The project looks for a solution to optimalization of rotational deep drawn part with flange production. It deals with sewerage drain, which is produced by conventional tool to two deep drawing operations. The used material is austenitic Cr-Ni stainless steel 1.4301. Suitability of this material for deep drawing operations was considered by means of the tensile test and the Erichsen test. On the bases of these results, serializability of production and theoretic relationships for determination of number of deep drawing operations, it was decided upon one operation serial production, by convent
APA, Harvard, Vancouver, ISO, and other styles
3

Thomas, William J. "Product, Tool, and Process Design Methodology for Deep Drawing and Stamping of Sheet Metal Parts." The Ohio State University, 1999. http://rave.ohiolink.edu/etdc/view?acc_num=osu1380542371.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Thomas, William James. "Product, tool, and process design methodology for deep drawing and stamping of sheet metal parts /." The Ohio State University, 1999. http://rave.ohiolink.edu/etdc/view?acc_num=osu1488193272068543.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Pecha, Oldřich. "Návrh výroby dřezu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318378.

Full text
Abstract:
Thesis submits concept of the sink fabrication technology where circular sink is made from rustproof austenitic steel 1.4301 (X5CrNi 18-10) using technology of conventional deep drawing without reducing wall’s thickness. Hydraulic press YL32 - 400 with nominal force 400 kN has been chosen as the production machine. Drawing tool with holder was designed to be used for this technology and its drawing documentation had been enclosed in this thesis. Size of the production series was set for 20 000 products annually. Control simulation of the drawing process has proven that designed component can b
APA, Harvard, Vancouver, ISO, and other styles
6

W, Lindvall Fredrik. "On tool steel, surface preparation, contact geometry and wear in sheet metal forming." Licentiate thesis, Karlstads universitet, Avdelningen för maskin- och materialteknik, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-8883.

Full text
Abstract:
In sheet metal forming operations the life length of the production equipment islargely dependent on the wear of the tools that are in direct contact with the sheet.One form of adhesive wear where some sheet material gets transferred to the tool, alsoknown as galling, is the most common cause of tool failure. The transferred materialsticks firmly to the tool and will scratch subsequent sheets and increase friction, renderingthem anywhere from aesthetically unsightly to completely ripped apart. Withcareful combination of several parameters the tools production life can be significantlyextended.
APA, Harvard, Vancouver, ISO, and other styles
7

Braško, Zdenko. "Výroba víčka." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-379014.

Full text
Abstract:
The aim of this thesis is to propose and design the production of the cap. The cap is welded to the tube of roller regal and is used for closing the tube. They together make a fixed assembly. There is a bearing molded from inside the cap and shaft passes through the center of the cap. The main function of whole assembly is to rotate the tube around its own axis. The cap will made from deep - drawing steel DC04 with a thickness of 2 mm. After consideration various possible variants for the cap production, there was chosen deep drawing without reduction of thickness as the most profitable techno
APA, Harvard, Vancouver, ISO, and other styles
8

Míka, Tomáš. "Výroba víka kotlového grilu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318379.

Full text
Abstract:
The thesis is focused on the design of the production of kettle grill lid from steel 11 305 (1.0338) with a constant wall thickness of 1 mm and a series of 10 000 pcs/year. For the selected method of manufacture by conventional drawing, technological calculations were performed. Depending on the diameter of the blank, maximum force and other parameters, the tool and the machine were designed. The tool is a single-operation drawing tool with a blank holder and a rib around the perimeter. These functional parts, together with the drawing punch and drawing die, are made of surface-treated cementi
APA, Harvard, Vancouver, ISO, and other styles
9

Němec, Miroslav. "Výroba držáku světel." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-416615.

Full text
Abstract:
The project elaborated design of production technology of light holder for agricultural tractors. Light holder is made of deep-drawn steel DC 01. For a production series of 30000 pieces, the production using a progressive die. The part will be manufactured in five steps. For production of the component was chosen hydraulic forming press CTH 250 of nominal force 2500kN from the company ŽĎAS. Total production costs of the component were calculated at 79 CZK.
APA, Harvard, Vancouver, ISO, and other styles
10

Bíba, David. "Výroba anemostatu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-399277.

Full text
Abstract:
The thesis handle design of part of anemostat in size of series 15000 pcs/year. Due to conus shape and dimensions of part was chosen out of quantity of manufacturing processes a technology of deep drawing without a thinnig of 1mm thick DC04 steel. The resulting solution is progressive tool which concatenate four operations of deep drawing process. The drawing tool make use of standardised components. The design contain progressive tool including drawing documentation. Hydraulic press CTH 400 with nominal force 4000 kN is used for mentioned procedure.
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Deep drawing tool"

1

Petrey, Taylor G. Tabernacles of Clay. University of North Carolina Press, 2020. http://dx.doi.org/10.5149/northcarolina/9781469656229.001.0001.

Full text
Abstract:
Taylor G. Petrey’s trenchant history takes a landmark step forward in documenting and theorizing about Latter-day Saints (LDS) teachings on gender, sexual difference, and marriage. Drawing on deep archival research, Petrey situates LDS doctrines in gender theory and American religious history since World War II. His challenging conclusion is that Mormonism is conflicted between ontologies of gender essentialism and gender fluidity, illustrating a broader tension in the history of sexuality in modernity itself. As Petrey details, LDS leaders have embraced the idea of fixed identities representi
APA, Harvard, Vancouver, ISO, and other styles
2

Rennie, Richard, and Jonathan Law, eds. A Dictionary of Physics. Oxford University Press, 2019. http://dx.doi.org/10.1093/acref/9780198821472.001.0001.

Full text
Abstract:
Over 4,000 entries This new eighth edition has been fully updated to reflect progress in physics and related fields. It sees expansion to the areas of cosmology, astrophysics, condensed matter, quantum technology, and nanotechnology, with 125 new entries including, Deep Underground Neutrino Experiment, kilonova, leptoquark, and muscovium. The dictionary’s range of appendices, updated for the new edition, includes the periodic table, the electromagnetic spectrum, and a detailed chronology of key dates. Seventeen new diagrams add to the clarity and accessibility of the text, with almost 150 line
APA, Harvard, Vancouver, ISO, and other styles
3

Lanoszka, Alexander. Atomic Assurance. Cornell University Press, 2018. http://dx.doi.org/10.7591/cornell/9781501729188.001.0001.

Full text
Abstract:
How do alliances curb potential or actual cases of nuclear proliferation, if at all? Many scholars assert that alliances are effective tools for bridling the nuclear ambitions of states and that the United States can especially take credit for suppressing nuclear proliferation among its allies around the world. This book challenges this widely-held view by arguing that alliances can be most useful for preventing potential nuclear proliferation but much less useful for curbing actual nuclear proliferation. Drawing on deep archival research it shows how allied decision-makers often evaluate Amer
APA, Harvard, Vancouver, ISO, and other styles
4

Riess, Jana. The Next Mormons. Oxford University Press, 2019. http://dx.doi.org/10.1093/oso/9780190885205.001.0001.

Full text
Abstract:
American Millennials—the generation born in the 1980s and 1990s—have been leaving organized religion in unprecedented numbers. For a long time, the Church of Jesus Christ of Latter-day Saints was an exception: nearly three-quarters of people who grew up Mormon stayed that way into adulthood. This book demonstrates that things are starting to change. Drawing on a large-scale national study of four generations of current and former Mormons as well as dozens of in-depth personal interviews, the text explores the religious beliefs and behaviors of young adult Mormons, finding that while their leve
APA, Harvard, Vancouver, ISO, and other styles
5

Wilson, Kay. Mental Health Law. Oxford University Press, 2021. http://dx.doi.org/10.1093/oso/9780192843258.001.0001.

Full text
Abstract:
The debate about whether mental health law should be abolished or reformed emerged during the negotiations of the Convention on the Right of Persons with Disabilities (‘CRPD’) and has raged fiercely for over a decade. It has resulted in an impasse between abolitionists, States Parties, and other reformers and a literature which has devolved into ‘camps’. Mental Health Law: Abolish or Reform? aims to cut through the confusion using the tools of human rights treaty interpretation backed by a deep jurisprudential analysis of core CRPD concepts—dignity (including autonomy), equality, and participa
APA, Harvard, Vancouver, ISO, and other styles
6

Ogorzalek, Thomas K. The Cities on the Hill. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780190668877.001.0001.

Full text
Abstract:
Recent electoral cycles have drawn attention to an urban–rural divide at the heart of American politics. This book traces the origins of red and blue America. The urbanicity divide began with the creation of an urban political order that united leaders from major cities and changed the Democratic Party during the New Deal era. These cities, despite being the site of serious, complex conflicts at home, are remarkably cohesive in national politics because members of city delegations represent their city as well as their district. Even though their constituents often don’t see eye-to-eye on impor
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Deep drawing tool"

1

Tisza, M. "Theoretical and Experimental Investigation of Ultrasonic Deep-Drawing." In Proceedings of the Twenty-Sixth International Machine Tool Design and Research Conference. Macmillan Education UK, 1986. http://dx.doi.org/10.1007/978-1-349-08114-1_60.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Reichardt, Gerd, and Mathias Liewald. "Friction Conditions on Deep-Drawing Tool Radii When Using Volatile Media as Lubrication Substitute." In TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-05861-6_150.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Baer, Oksana, Robby Mannens, Daniel Trauth, Mario Kittel, Fritz Klocke, and Thomas Bergs. "Phase-Field Modelling of the Solidified Nodular Cast-Iron Alloy EN–JS2070 Micro Structure for Deep Drawing Tool Application Treated by Machine Hammer Peening." In Advances in Production Research. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-030-03451-1_33.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Mennecart, Thomas, Jörg Kolbe, and Matthias Kleiner. "Hybrid Deep Drawing Tools for High Strength Steels." In 60 Excellent Inventions in Metal Forming. Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-662-46312-3_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Wolf, A., M. Tulke, and A. Brosius. "Deep Drawing with Macro-structured Tools and Their Influence on Residual Stresses." In Lecture Notes in Production Engineering. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-78424-9_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Lee, K. S., and K. H. W. Seah. "The Effects of Titanium Nitride Coated Tools in the Deep Drawing of Mild Steel Sheets." In Proceedings of the Twenty-Ninth International Matador Conference. Macmillan Education UK, 1992. http://dx.doi.org/10.1007/978-1-349-12433-6_50.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Baptista, R. M. S. O., and P. M. C. Custódio. "Overview of Proestamp: An Integrated System for the Design, Optimization and Performance Evaluation of Deep Drawing Tools." In Advanced Manufacturing Systems and Technology. Springer Vienna, 1996. http://dx.doi.org/10.1007/978-3-7091-2678-3_39.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Tourki, Zoubeir, and Mohamed Cherkaoui. "Deep Drawing Process of the AISI 304 Stainless Steel Cup: Interaction Between Design Tools and Kinetic of Plastic Strain Induced Martensite." In Solid Mechanics and Its Applications. Springer Netherlands, 2004. http://dx.doi.org/10.1007/978-94-017-0483-0_49.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Broberg, Anders. "TEXT-COL." In Advances in Web-Based Education. IGI Global, 2006. http://dx.doi.org/10.4018/978-1-59140-690-7.ch012.

Full text
Abstract:
Traditionally, much of the efforts to develop computer-based tools has been concentrated on developing production or authoring tools, such as word processors, drawing programs, and so on, and not so many consumption or reading tools have been developed except Web browsers and different kinds of media players. Authoring plays an important role in the learning process, and good tools are needed, but reading—especially active reading—and exploring are is at least as important. Traditionally, computer-mediated texts have little support for an active way of reading. This means that reading computer-mediated texts, as on the WWW, tends to be a very passive form of reading. The development of Text-Col addresses this problem. Text-Col is a tool designed to support readers in deep processing of texts by letting the readers change appearance of the text based on different strategies for categorizing words. Text-Col is a reading tool and exploring tool aimed to make the reading process more active.
APA, Harvard, Vancouver, ISO, and other styles
10

Flannery, Maura C. "Visualization in Biology." In Knowledge Visualization and Visual Literacy in Science Education. IGI Global, 2016. http://dx.doi.org/10.4018/978-1-5225-0480-1.ch005.

Full text
Abstract:
This chapter deals with what are commonly called seaweed, but are more correctly termed algae, that is, photosynthetic organisms that live in aquatic environments. Algae are visually beautiful and therefore a good subject for a biology teacher looking to explore the intersection of art and science with students. These connections run deep into knowledge production because drawing is fundamental not only to communicating information about organisms but also to investigating their characteristics. Observation and comparison are key tools in learning about the living world, and drawing is essential to these processes. Also discussed here will be the importance of relating texts, photographs, specimens, and drawings in assisting students to learn about algae. In addition, online sources for these tools will be explored.
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Deep drawing tool"

1

Guilleaume, Christina, Ali Mousavi, and Alexander Brosius. "Hybrid deep drawing tool for lubricant free deep drawing." In PROCEEDINGS OF THE INTERNATIONAL CONFERENCE OF GLOBAL NETWORK FOR INNOVATIVE TECHNOLOGY AND AWAM INTERNATIONAL CONFERENCE IN CIVIL ENGINEERING (IGNITE-AICCE’17): Sustainable Technology And Practice For Infrastructure and Community Resilience. Author(s), 2017. http://dx.doi.org/10.1063/1.5008159.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Doege, E., and G. Stock. "Locked Tool - Deep-Drawing Process and Examples of Operations with Elastic Blank-Holders." In International Congress & Exposition. SAE International, 1995. http://dx.doi.org/10.4271/950917.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Ramirez, Francisco Javier, Rosario Domingo, and Miguel Angel Sebastian. "Deep drawing tool for e-learning: A didactic approach for manufacturing engineering education." In 2010 IEEE Education Engineering 2010 - The Future of Global Learning Engineering Education (EDUCON 2010). IEEE, 2010. http://dx.doi.org/10.1109/educon.2010.5492429.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Bader, Fabian, Florian Hengsbach, Kay-Peter Hoyer, Werner Homberg, and Mirko Schaper. "Intrinsically lubricated tool inserts for deep drawing applications generated by selective laser melting." In PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2019. AIP Publishing, 2019. http://dx.doi.org/10.1063/1.5112720.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Groche, Peter, and Norman Möller. "Tribological Investigation of Deep-Drawing Processes Using Servo Presses." In ASME 2012 International Manufacturing Science and Engineering Conference collocated with the 40th North American Manufacturing Research Conference and in participation with the International Conference on Tribology Materials and Processing. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/msec2012-7292.

Full text
Abstract:
Deep-drawing is one of the most important processes for the economic production of sheet metal parts, especially for high quantities. The forming forces during the process are a limiting factor for the producible shapes. A particular importance is associated with the tribology, because the percentage of friction forces on the total forces is relatively high. The friction between sheet metal and tool is influenced by several factors, such as surface characteristics of the work piece and the tool, lubrication conditions and process parameters, like the contact pressure and the sliding speed. Con
APA, Harvard, Vancouver, ISO, and other styles
6

Garci´a Zugasti, Pedro de Jesu´s, Hugo Iva´n Medelli´n Castillo, Abel Cerino Zapata, Dirk Frederik de Lange, and Antonio Ca´rdenas Galindo. "Failure Analysis of a Double Rectangular Deep Drawn Part Using FEM: An Industrial Case." In ASME 2010 International Mechanical Engineering Congress and Exposition. ASMEDC, 2010. http://dx.doi.org/10.1115/imece2010-39062.

Full text
Abstract:
Complex shape deep drawn parts are more frequently used in many industrial applications. However, complex parts can be particularly difficult to form due to serious wrinkling and tearing problems associated to the different forming modes and complex material flow. Moreover, deep drawing depends highly on the part design, including radii, draw depths, wall angles, steps and transitions; these variables interact to affect the cost and quality of the drawing. Since there are not theoretical methods available in the literature yet, and because several factors affect the drawn, deep drawing of comp
APA, Harvard, Vancouver, ISO, and other styles
7

García Zugasti, Pedro de Jesús, Hugo Iván Medellín Castillo, Pablo Alberto Limon Leyva, Eder Hazael Govea Valladares, and José Luis Hernández Rivera. "Numerical Analysis and Simulation (FEM) of a Double Deep Drawing Sink Height." In ASME 2017 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/imece2017-72088.

Full text
Abstract:
This paper presents the results of a research project obtained using theoretical, numerical and experimental methods, in order to solve the problems encountered when increasing the height of a double deep drawing sink, and the proposed solution. The analysis considers: Manufacturer limitations (eg. tool modifications, steel material changes etc.), the process parameters observed and measured during the deep drawing operation of the failure part, the theoretical fundamentals of sheet metal forming and the analysis and simulation with a computer program based in the finite element method (FEM).
APA, Harvard, Vancouver, ISO, and other styles
8

Schulze, Tobias, Jürgen Weber, Knut Großmann, Lars Penter, and Christer Schenke. "Hydraulic Die Cushions in Deep Drawing Presses: Analysis and Optimization Using Coupled Simulation." In ASME/BATH 2015 Symposium on Fluid Power and Motion Control. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/fpmc2015-9623.

Full text
Abstract:
The scientific paper proposes a method to analyze and optimize the drawing press and the deep drawing process with a virtual model. It focuses on hydraulic multi-point die cushions since they offer a wide range of possible adjustments and a high potential to increase production quality and efficiency. The operator can apply individual die cushion cylinder forces to the blankholder which enables the control of the forming process and manual die spotting can theoretically be reduced to a minimum. Utilizing the virtual model can improve the drawing press’ behavior and significantly reduce the set
APA, Harvard, Vancouver, ISO, and other styles
9

Garcia Zugasti, Pedro de Jesus, Erick M. Salcedo Murillo, Hugo I. Medellín Castillo, Dirk Frederik De Lange, and Juan Gabriel Sandoval Granja. "Sheet Metal Blank Development of a Deep Drawing Fan Support Using Theoretical Rules and FEM." In ASME 2014 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/imece2014-38537.

Full text
Abstract:
Deep drawing is a cost effective sheet metal forming process to produce many industrial components. However, complex geometrical drawn parts are difficult to form due to several modes and conditions of the material flow. Commonly problems associated to the forming operation are wrinkling and tearing defects, which affect the cost and quality of the parts. Actually, there are not theoretical methods developed in the literature yet, so the trial and error method are used to reduce or eliminate the deep drawing defects or inclusive is utilized in the earlier production stages, resulting in higher
APA, Harvard, Vancouver, ISO, and other styles
10

Garci´a Zugasti, Pedro de Jesu´s, Hugo Iva´n Medelli´n Castillo, and Dirk Frederik de Lange. "A Case Study of Drawbead Design of a Deep Drawn Rectangular Part Using FEM." In ASME 2009 International Mechanical Engineering Congress and Exposition. ASMEDC, 2009. http://dx.doi.org/10.1115/imece2009-11250.

Full text
Abstract:
The deep drawing manufacturing process of sheet metal parts with complex shape has increased recently in applications such as in the automotive industry and the household appliances. The trial and error methods commonly used in defining the process parameters, cause high costs and large development times. The computer assisted analysis and simulations are being used more frequently to reduce the cost and development time of a product. The process parameters can be modified and evaluated using these computer simulations before the production is carried out. Therefore the defects of a part can b
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography