Log in

Relevant bibliographies by topics / Deformation phase

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Deformation phase'

Author: Grafiati

Published: 8 June 2024

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Deformation phase.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Deformation phase"

1

Sundeev, R. V., A. M. Glezer, and A. V. Shalimova. "Phase Transformations «Amorphization ↔ Crystallization» In Metallic Materials Induced by Severe Plastic Deformation." REVIEWS ON ADVANCED MATERIALS SCIENCE 54, no. 1 (2018): 93–105. http://dx.doi.org/10.1515/rams-2018-0021.

Full text

Abstract:

Abstract In this review we are considered systematically the phenomenon of deformation-induced phase transformations from crystalline intermetallic compounds and complex phases to amorphous state and vice versa phase transformations from amorphous state to crystalline one upon severe plastic deformation at different temperatures. The nature and structural features of these transitions essentially for high pressure torsion deformation are analyzed in the frame of basic principles of nonequilibrium thermodynamics. The effects of phase cycling and a stationary amorphous - nanocrystalline state fo

APA, Harvard, Vancouver, ISO, and other styles

2

Carter, Karen E. "Grenville orogenic affinities in the Red Mountain area, Llano Uplift, Texas." Canadian Journal of Earth Sciences 26, no. 6 (1989): 1124–35. http://dx.doi.org/10.1139/e89-096.

Full text

Abstract:

The Red Mountain area in the southeast corner of the Llano Uplift contains evidence of a Grenville-age, polyphase, non-coaxial deformational history. Four synmetamorphic deformational phases affected the Precambrian Click Formation of the Packsaddle Group, and a single shear-related deformation is observed in the Big Branch and Red Mountain gneisses. The first phase of deformation produced tight folds with an axial–planar metamorphic foliation. The second, and most intense, pervasive deformational phase produced the regional metamorphic layering, isoclinal folds, transposition of bedding, and

APA, Harvard, Vancouver, ISO, and other styles

3

Cui, Ya, Zhi Min Zhang, Jian Min Yu, and Qiang Wang. "Research on Multiple Plastic Deformations of Ultra-High Strength Aluminium Alloy." Advanced Materials Research 652-654 (January 2013): 1132–37. http://dx.doi.org/10.4028/www.scientific.net/amr.652-654.1132.

Full text

Abstract:

Research on multipass plastic deformation of 7A04 ultra-high strength aluminium alloy by isothermal compression experiments on the 6300KN extrusion press. Experiment results show that elongation reaches its maximal value 9.25% after the first deformation. It is obvious that fibrous tissues appeared along the metal flow direction in the deformed 7A04 ultra-high aluminium alloy, with heterogeneous distribution of precipitated η (MgZn2) phase in the matrix, which results in lower strength (Rm=335MPa, Re=212.5MPa). As the times of deformation increases, precipitated phases grow gradually and the p

APA, Harvard, Vancouver, ISO, and other styles

4

Baidya, Tapan K., Nabakumar Maity, and Parimal Biswas. "Tectonic Phases and Crustal Evolution in a Part of the Eastern Chotanagpur Gneissic Complex." Journal Geological Society of India 34, no. 3 (1989): 318–24. http://dx.doi.org/10.17491/jgsi/1989/340312.

Full text

Abstract:

Abstract The area in and around Jabarban-Belamu (23°25' - 23°29'N, 86° - 86c05'E) of the Purulia district, West Bengal, bears evidences of polyphase deformation, metamorphism and magmatic activity in the eastern Chotanagpur complex. At least four phases of deformation are imprinted on the rocks since the sedimentation ( ∼ 2300 Ma) of the metasedimentaries up to the last phase of granitic activity (∼800 Ma). A regional north-south compression was responsible for the development of isoclinal or tight F1 and F2-foIds with nearly east-west axes and overturning towards south. Ultrametamorphism of t

APA, Harvard, Vancouver, ISO, and other styles

5

Nurdin, N., D. Pujiastuti, and M. Marzuki. "Analysis of vertical seismic deformation of the 2018 Palu earthquake using Global Navigation Satellite System (GNSS) data." Journal of Physics: Conference Series 2596, no. 1 (2023): 012037. http://dx.doi.org/10.1088/1742-6596/2596/1/012037.

Full text

Abstract:

Abstract The vertical seismic deformation of the Palu earthquake magnitude of 7.4 on the Richter Scale, which occurred on September 28, 2018, has been analyzed using InaCORS (Indonesian Continuously Operating Reference Stations) stations. The stations used are CBAL, PALP, CTOL, CMLI, CPAL, and CBIT. The analysis was conducted using GAMIT, GLBOK, and GMT software. The analysis focused on the period of 100 days, starting from August 6, 2018 (DoY 218) to November 28, 2018 (DoY 318), encompassing the preseismic, coseismic, and post-seismic phases. During the preseismic phase (DoY 218-270), the Ina

APA, Harvard, Vancouver, ISO, and other styles

6

Ni, Peishuang, Yanyang Liu, Hao Pei, Haoze Du, Haolin Li, and Gang Xu. "CLISAR-Net: A Deformation-Robust ISAR Image Classification Network Using Contrastive Learning." Remote Sensing 15, no. 1 (2022): 33. http://dx.doi.org/10.3390/rs15010033.

Full text

Abstract:

The inherent unknown deformations of inverse synthetic aperture radar (ISAR) images, such as translation, scaling, and rotation, pose great challenges to space target classification. To achieve high-precision classification for ISAR images, a deformation-robust ISAR image classification network using contrastive learning (CL), i.e., CLISAR-Net, is proposed for deformation ISAR image classification. Unlike traditional supervised learning methods, CLISAR-Net develops a new unsupervised pretraining phase, which means that the method uses a two-phase training strategy to achieve classification. In

APA, Harvard, Vancouver, ISO, and other styles

7

Skorupska, Monika, Mariusz Kulczyk, Piotr Denis, Dominik Grzęda, Anna Czajka, and Joanna Ryszkowska. "Structural Hierarchy of PA6 Macromolecules after Hydrostatic Extrusion." Materials 16, no. 9 (2023): 3435. http://dx.doi.org/10.3390/ma16093435.

Full text

Abstract:

This article presents the influence of severe plastic deformation by hydrostatic extrusion (HE) on the thermal and structural properties of polyamide 6 (PA6). During the hydrostatic extrusion process, a fibrous structure oriented along the extrusion direction is formed, which was visualized during microscopic observations. The degree of crystallinity was analyzed by differential scanning calorimetry (DSC). Wide-angle X-ray scattering diffraction (WAXS) analysis was used to partially characterize the PA6 structure after the HE process. The contents of various forms of the crystalline phase in P

APA, Harvard, Vancouver, ISO, and other styles

8

Huang, Zengshu, Jinping Sun, Qing Li, Weixian Tan, Pingping Huang, and Yaolong Qi. "Time- and Space-Varying Atmospheric Phase Correction in Discontinuous Ground-Based Synthetic Aperture Radar Deformation Monitoring." Sensors 18, no. 11 (2018): 3883. http://dx.doi.org/10.3390/s18113883.

Full text

Abstract:

Ground-based synthetic aperture radar (GB-SAR) uses active microwave remote-sensing observation mode to achieve two-dimensional deformation measurement and deformation trend extraction, which shows great prospects in the field of deformation monitoring. However, in the process of GB-SAR deformation monitoring, the disturbances caused by atmospheric effect cannot be neglected, and the atmospheric phases will seriously affect the precision of deformation monitoring. In discontinuous GB-SAR deformation monitoring mode, the atmospheric phases are particularly affected by changes of time and space,

APA, Harvard, Vancouver, ISO, and other styles

9

Ryś, Janusz, and Anna Zielińska-Lipiec. "Structural Aspects of Ferrite and Austenite Co-Deformation in Duplex Stainless Steel." Solid State Phenomena 203-204 (June 2013): 28–33. http://dx.doi.org/10.4028/www.scientific.net/ssp.203-204.28.

Full text

Abstract:

The present research is a part of project dealing with structural aspects of ferrite and austenite co-deformation in duplex stainless steels. The examination concerned a development of ferrite and austenite microstructures, major deformation mechanisms operating in both phases and texture formation upon cold-rolling of a model duplex type steel. The investigations showed that the band-like morphology of two-phase structure formed upon processing together with specific starting textures obtained after a preliminary thermo-mechanical treatment exerted significant influence on texture and microst

APA, Harvard, Vancouver, ISO, and other styles

10

Bhola, A. M., and S. Varadarajan. "Deformational and Crystallization History of the Delhi Group Rocks, Around Narnaul, Haryana, India." Journal Geological Society of India 26, no. 6 (1985): 380–89. http://dx.doi.org/10.17491/jgsi/1985/260602.

Full text

Abstract:

Abstract The regional metamorphic rocks of Precambrian age belonging to the Delhi Group, around Narnaul, show complex deformational-crystallization history. The first deformation phase, F1 of Delhi orogeny produced isoclinal folds overturned towards southeast plunging in NNE-SSW directions associated with most pervasive foliation S1. The later deformation phases, F2, tight to open folds, and F3, open folds produced crenulation cleavages S2 and S3 (rare). These three deformational events have been correlated with the crystallization periods of the more important minerals in pelitic schists and

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Deformation phase"

1

Singh, Shiv Brat. "Phase transformations from deformed austenite." Thesis, University of Cambridge, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.246513.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Sandala, Rebecca Sarah. "Deformation mechanims of two-phase titanium alloys." Thesis, University of Manchester, 2014. https://www.research.manchester.ac.uk/portal/en/theses/deformation-mechanims-of-twophase-ttitanium-alloys(50a395c3-70f6-49f7-a3df-41d2f899a851).html.

Full text

Abstract:

Two-phase Ti6246 alloy is a light weight material exhibiting very high strength at higher temperatures compared to the commonly used Ti64 alloy. This particular alloy is used at the later stages of compressor discs within the aero engines. However, compressor discs undergo a number of cyclic stresses, which could eventually lead to fatigue failure. In order to optimize the microstructure for design and lifing models, an improved understanding of the localised deformation mechanisms is crucial, particularly at the surface, as cracks can be initiated leading to failure and in turn affect the lif

APA, Harvard, Vancouver, ISO, and other styles

3

Djazeb, Mohammad Reza. "High temperature deformation of two-phase Al-alloys." Thesis, Imperial College London, 1990. http://hdl.handle.net/10044/1/46282.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Hedström, Peter. "Deformation and martensitic phase transformation in stainless steels /." Luleå : Department of Applied Physics and Mechanical Engineering, Division of Engineeing Materials, Luleå University of Technology, 2007. http://epubl.ltu.se/1402-1544/2007/67/.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Kismarahardja, Ade Wijaya. "The Deformation-Induced Phase Transformation in Gold Nanoribbons." Thesis, University of Sydney, 2020. https://hdl.handle.net/2123/23034.

Full text

Abstract:

The tensile experiment for nanomaterials in a transmission electron microscope (TEM) has become a very important tool to study the atomic deformation of material at nanoscale. An enormous amount of effort has been spent to perform the tensile experiments on nanomaterials. They revealed new discoveries that have never been observed in bulk materials and eventually lead to further applications. In this thesis, experimental reports of tensile test on gold nanoribbons in TEM were reported. The gold nanoribbons have 4H structure but the FCC structure could coexist in some areas. Gold nanoparticles

APA, Harvard, Vancouver, ISO, and other styles

6

Sinclair, Chad. "Co-deformation of a two-phase FCC/BCC material /." *McMaster only, 2001.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Jenkins, Brent Allan. "Phase transformations and deformation metallography in dilute uranium alloys." Thesis, University of Oxford, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.670343.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Yamaguchi, Masashi. "Phase-field simulation of dendritic growth under externally applied deformation." Diss., University of Iowa, 2011. https://ir.uiowa.edu/etd/2792.

Full text

Abstract:

Defects, i.e. hot tears, macrosegragation, and pores, formed in metal castings are a result of stresses and strains in the solid-liquid mushy zone. Numerical simulation of solidification of deforming dendrite crystal promises to improve insight into the mechanical behavior of mushy zones under an applied load. The primary goal of this thesis is to develop numerical methodologies for performing solidification simulation of deforming dendrites. Such simulation encounters difficulties associated with the interface dynamics due to phase change or interaction among the dendrites, and large visco-pl

APA, Harvard, Vancouver, ISO, and other styles

9

Hill, Thomas. "Evolution of second phase particles with deformation in aluminium alloys." Thesis, University of Manchester, 2015. https://www.research.manchester.ac.uk/portal/en/theses/evolution-of-second-phase-particles-with-deformation-in-aluminium-alloys(e87af2eb-bf04-46d5-9b51-d44d4584c579).html.

Full text

Abstract:

The effect of high temperature, high strain rate deformation on the evolution of second phase particles in commercial aluminium alloys has been investigated. Three model alloys provided by Novelis have been examined, and the evolution of particles during deformation has been examined for the alloy that most closely resembles the composition of alloys used in commercial applications. The effect of deformation mechanisms was expected to be an enhancement of diffusion controlled processes; therefore the first part of the work was to develop a heat treatment that would produce a fine distribution

APA, Harvard, Vancouver, ISO, and other styles

10

Zhang, Nianxian. "Processing of a two-phase alloy by severe plastic deformation." Thesis, University of Southampton, 2015. https://eprints.soton.ac.uk/388051/.

Full text

Abstract:

This thesis presents a systematic study on evolutions of microstructure, microhardness and superplasticity of a Pb-62% Sn alloy processed by both equal-channel angler pressing (ECAP) and high-pressure torsion (HPT) and the subsequent self-annealing process at room temperature (RT). The Pb-Sn alloy exhibits characteristics with significant grain refinement after processing by ECAP and HPT but with a reduction in the hardness values by comparison with the initial as-cast condition. For HPT processing, it is shown that there are generally smaller grains at the edges of the discs by comparison wit

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Deformation phase"

1

Bruhn, David F. Rheology of fine-grained two-phase rocks with phases of similar strength: An experimental investigation. Swiss Federal Institute of Technology Zürich, 1996.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

N, Subramanian K., Imam M. A, and Metallurgical Society of AIME. Physical Metallurgy Committee., eds. Structure and deformation of boundaries. Metallurgical Society, 1986.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Kazantzis, Antonios Vasileiou. Thermal stability, mechanical properties and deformation microstructures of the laves phase Cr[inferior two]Nb. University of Birmingham, 1999.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Zeinolebadi, Ahmad. In-situ Small-Angle X-ray Scattering Investigation of Transient Nanostructure of Multi-phase Polymer Materials Under Mechanical Deformation. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-35413-7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Zeinolebadi, Ahmad. In-situ Small-Angle X-ray Scattering Investigation of Transient Nanostructure of Multi-phase Polymer Materials Under Mechanical Deformation. Springer Berlin Heidelberg, 2013.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

S, Majumdar Bhaskar, and United States. National Aeronautics and Space Administration., eds. In-phase thermomechanical fatigue mechanisms in an unidirectional SCS-6/Ti 15-3 MMC. National Aeronautics and Space Administration, 1995.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

S, Majumdar Bhaskar, and United States. National Aeronautics and Space Administration., eds. In-phase thermomechanical fatigue mechanisms in an unidirectional SCS-6/Ti 15-3 MMC. National Aeronautics and Space Administration, 1995.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

S, Majumdar Bhaskar, and United States. National Aeronautics and Space Administration., eds. In-phase thermomechanical fatigue mechanisms in an unidirectional SCS-6/Ti 15-3 MMC. National Aeronautics and Space Administration, 1995.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Seiichi, Nishikawa, and United States. National Aeronautics and Space Administration., eds. On the abnormal phenomena observed in the electrical resistivity measurement during the decomposition process of saturated Cu-Fe alloys. National Aeronautics and Space Administration, 1988.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Armijo, Joseph D. Investigation of large stone-modified asphalt mixes using the Marshall method: Part of permanent deformation (rutting) characteristics of binder-aggregate mixtures containing conventional and modified asphalt binders phase II of cooperative study with the University of California-Berkeley and the California Department of Transportation. Montana Dept. of Highways, 1991.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Deformation phase"

1

Osawa, S., and R. S. Porter. "Planar Deformation of Thermoplastics." In Solid Phase Processing of Polymers. Carl Hanser Verlag GmbH & Co. KG, 2000. http://dx.doi.org/10.1007/978-3-446-40184-6_8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Osawa, S. "Planar Deformation of Thermoplastics." In Solid Phase Processing of Polymers. Carl Hanser Verlag GmbH & Co. KG, 2000. http://dx.doi.org/10.3139/9783446401846.008.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Weidner, Anja. "Martensitic Phase Transformation." In Deformation Processes in TRIP/TWIP Steels. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-37149-4_3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Owen, David M., and Atul H. Chokshi. "High Temperature Deformation of Dual Phase Alumina-Zirconia Composites." In Plastic Deformation of Ceramics. Springer US, 1995. http://dx.doi.org/10.1007/978-1-4899-1441-5_45.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Waitz, T., V. Kazykhanov, and H. P. Karnthaler. "Microstructure and Phase Transformations of HPT NiTi." In Nanomaterials by Severe Plastic Deformation. Wiley-VCH Verlag GmbH & Co. KGaA, 2005. http://dx.doi.org/10.1002/3527602461.ch6e.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Bassett, D. C. "Deformation Mechanisms and Morphology of Crystalline Polymers." In Solid Phase Processing of Polymers. Carl Hanser Verlag GmbH & Co. KG, 2000. http://dx.doi.org/10.1007/978-3-446-40184-6_2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Bassett, D. C. "Deformation Mechanisms and Morphology of Crystalline Polymers." In Solid Phase Processing of Polymers. Carl Hanser Verlag GmbH & Co. KG, 2000. http://dx.doi.org/10.3139/9783446401846.002.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Knowles, James K. "Continuum Modeling of Phase Transitions in Solids." In Anisotropy and Localization of Plastic Deformation. Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-011-3644-0_116.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Pohjonen, Aarne. "Deformation of Elastically Inhomogeneous Solid Modelled with Diffuse Interface Approach." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2024. http://dx.doi.org/10.1007/978-3-031-58006-2_8.

Full text

Abstract:

AbstractDiffuse interfaces are useful tools for simulating evolution of material phases, and they are fundamentally important part of the phase field method. Since, in solid state, different phases can have different elastic constants, it is important to be able to incorporate them into the numerical simulations. In current study, the theory of deformation of elastically inhomogeneous solid with diffuse interface approach and application of relatively simple numerical method for solving the problem are described. Deformation of a solid containing an elastical inhomogeneity is simulated for two

APA, Harvard, Vancouver, ISO, and other styles

10

Green, Harry W. "Phase transformation under stress and volume transfer creep." In Mineral and Rock Deformation: Laboratory Studies. American Geophysical Union, 1986. http://dx.doi.org/10.1029/gm036p0201.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Deformation phase"

1

Rahaman, Md Wahid, Debamalya Rakshit, Devraj Roy, and Mainak Sengupta. "Vibration and Deformation Studies of 3-Phase SRM." In 2024 IEEE 21st India Council International Conference (INDICON). IEEE, 2024. https://doi.org/10.1109/indicon63790.2024.10958527.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Haukås-Eide, Odd, Bjørn-Andreas Hugaas, and Espen Heier. "Effect of Plastic Deformation on Hydrogen Induced Cracking (HISC) in Duplex Stainless Steel." In CORROSION 2007. NACE International, 2007. https://doi.org/10.5006/c2007-07494.

Full text

Abstract:

Abstract The oil and gas industry has the last few years experienced several major failures in subsea components made of Duplex stainless steel due to Hydrogen Induced Stress Cracking (HISC) with hydrogen introduced from the cathodic protection system. The main objective of the work presented in this paper has been to gain a better understanding of the HISC fracture mechanism. A test method allowing examination of the deformation behaviour in the individual phases during stepwise loading has been developed, and further the deformation in the individual phases have been documented. Both as deli

APA, Harvard, Vancouver, ISO, and other styles

3

Kolosov, S. V., M. V. Nadezhkin, G. V. Shlyakhova, A. M. Nikonova, S. A. Barannikova, and L. V. Zuev. "PHASE DEFORMATION TRANSFORMATIONS OF STAINLESS STEEL." In Physical Mesomechanics of Materials. Physical Principles of Multi-Layer Structure Forming and Mechanisms of Non-Linear Behavior. Novosibirsk State University, 2022. http://dx.doi.org/10.25205/978-5-4437-1353-3-87.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Gautam, Surya Kumar, and Dinesh N. Naik. "Deformation measurement using phase retrieval iterative algorithm." In Frontiers in Optics. Optica Publishing Group, 2023. http://dx.doi.org/10.1364/fio.2023.jm7a.103.

Full text

Abstract:

To ensure consistent reconstruction consecutively in the phase retrieval iterative algorithm, without encountering any twin artifacts, we have implemented a two-beam illumination scheme. This approach enables us to accurately measure the deformation of the object's surface.

APA, Harvard, Vancouver, ISO, and other styles

5

Partridge, G. B., W. Li, Y. A. Liao, D. Nguyen, R. I. Kamar, and R. G. Hulet. "Spatial Deformation in a Phase Separated Fermi Gas." In Laser Science. OSA, 2006. http://dx.doi.org/10.1364/ls.2006.lmc3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Yanagisawa, M., M. Imai, T. Taniguchi, Michio Tokuyama, Irwin Oppenheim, and Hideya Nishiyama. "Shape Deformation of Vesicle Coupled with Phase Separation." In COMPLEX SYSTEMS: 5th International Workshop on Complex Systems. AIP, 2008. http://dx.doi.org/10.1063/1.2897875.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Gu, G. Q., K. F. Wang, Pramod K. Rastogi, and Erwin Hack. "Study of Phase-shifting Techniques in Digital Speckle Pattern Interferometry for Deformation Measurement." In INTERNATIONAL CONFERENCE ON ADVANCED PHASE MEASUREMENT METHODS IN OPTICS AND IMAGING. AIP, 2010. http://dx.doi.org/10.1063/1.3426168.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Sauthoff, Anni, Paul Köchert, Günther Prellinger, et al. "Two multi-wavelength interferometers for large-scale surveying." In 5th Joint International Symposium on Deformation Monitoring. Editorial de la Universitat Politècnica de València, 2022. http://dx.doi.org/10.4995/jisdm2022.2022.13635.

Full text

Abstract:

Deformation monitoring requires the detection of smallest changes, always at the limits of technical feasibility. Trying to push these limits further, we have realised two terrestrial ranging instruments: a long-range 1D electro-optic distance meter and a 3D multilateration-capable sensor system of 50 m range. The former one is intended as primary standard for the calibration of geodetic instrumentation with low uncertainty to the SI definition of the metre. The latter one is intended for monitoring larger monuments like VLBI antennas. In this contribution, we describe the technical challenges

APA, Harvard, Vancouver, ISO, and other styles

9

JOLIE, J., S. HEINZE, A. LINNEMANN, V. WERNER, P. CEJNAR, and R. P. CASTEN. "LANDAU THEORY OF PHASE TRANSITIONS AND NUCLEAR GROUNDSTATE DEFORMATION." In Proceedings of the Eleventh International Symposium. WORLD SCIENTIFIC, 2003. http://dx.doi.org/10.1142/9789812795151_0004.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Matsumoto, Tetsuya, Yoichi Kitagawa, and Masaaki Adachi. "Dynamic phase measurement of large deformation with speckle interferometry." In Optomechatronic Systems III, edited by Toru Yoshizawa. SPIE, 2002. http://dx.doi.org/10.1117/12.467337.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Deformation phase"

1

Culp, David, Nathan Miller, and Laura Schweizer. Application of Phase-Field Techniques to Hydraulically- and Deformation-Induced Fracture. Office of Scientific and Technical Information (OSTI), 2017. http://dx.doi.org/10.2172/1378175.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Zheng. L52044 Effects of Operating Practice on Crack Dormancy and Growth. Pipeline Research Council International, Inc. (PRCI), 2005. http://dx.doi.org/10.55274/r0011334.

Full text

Abstract:

This report describes the output of two phases of the research contract on �Effects of Operating Practice on SCC Crack Growth�, GRI-05/8668, submitted to PRCI in August 2002 (Phase I) and in July 2003 (Phase II). The objective of the first phase of the work was to identify, through literature survey, a correlation model that relates the crack growth rate in low-pH or in high-pH environments to the deformation rate of the line pipe steel. The objective of the second phase of the project was to experimentally validate the correlation model(s) identified in Phase I. The ultimate goal of this work

APA, Harvard, Vancouver, ISO, and other styles

3

A. J. Beaudoin, J. A. Dantzig, I. M. Robertson, B. E. Gore, S. F. Harnish, and H. A. Padilla. Development of a Two-Phase Model for the Hot Deformation of Highly-Alloyed Aluminum. Office of Scientific and Technical Information (OSTI), 2005. http://dx.doi.org/10.2172/859225.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

An, Yonghao, B. C. Wood, M. Tang, and H. Jiang. Phase-field Model for Stress-dependent Ginsburg-Landau Kinetics for Large Deformation of Silicon Anodes. Office of Scientific and Technical Information (OSTI), 2014. http://dx.doi.org/10.2172/1172293.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Paidoussis, Michael. PR-593-18700-R01 Brine String Dynamics IV Deformation-Vibration in Solution Mined Caverns. Pipeline Research Council International, Inc. (PRCI), 2021. http://dx.doi.org/10.55274/r0012099.

Full text

Abstract:

The research described in this report is focused on the dynamics of the brine strings utilized in solution-mined caverns. In Configuration 3, fluid enters the system from the top of the brine string and exits via the annulus between the brine string and the casing. In Configuration 4 the flows are inverted. An improved analytical model for stability of the brine string in Configuration 3 has been generated, and considerably better modelling for Configuration 4 achieved. Experiments in a bench-top sized system and CFD work were pursued partly to further improve the analytical models, and partly

APA, Harvard, Vancouver, ISO, and other styles

6

Branch, Brittany, Paul Specht, Sally Jensen, and Bradley Jared. Transient Deformation in Additively Manufactured 316L Stainless Steel Lattices Characterized with in-situ X-ray Phase Contrast Imaging: The Complete Dataset for Three Geometrical Lattices. Office of Scientific and Technical Information (OSTI), 2021. http://dx.doi.org/10.2172/1820238.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Beavers, Leis, and Eiber. L51517 Stress Corrosion Cracking Research. Pipeline Research Council International, Inc. (PRCI), 1986. http://dx.doi.org/10.55274/r0010597.

Full text

Abstract:

The objective of the Stress-Corrosion Cracking (SCC) Phase of the NG-18 program is to develop an understanding of the causes of external SCC and methods of controlling it on new and existing gas transmission pipelines. An overview of past and proposed NG-18 programs designed to address this objective is given in Figure 1 in the Introduction Section, where it can be seen that the research has been divided into two categories, SCC mitigation and life estimation. The research carried out in 1985 at BCD focused on several areas under these categories: (1) the development of resistant steels and su

APA, Harvard, Vancouver, ISO, and other styles

8

Deschamps, Robert, and Henschel. PR-420-133721-R01 Comparison of Radar Satellite Methods for Observation of Stability. Pipeline Research Council International, Inc. (PRCI), 2015. http://dx.doi.org/10.55274/r0010840.

Full text

Abstract:

This report discusses the use of Synthetic Aperture Radar (SAR) satellites for monitoring above ground pipelines and buried pipeline Rights-Of-Way (ROWs) using Interferometric Synthetic Aperture Radar (InSAR) techniques. The main thrust of the research was to evaluate the suitability of above-ground pipeline support members as InSAR measurement points, and to adapt existing techniques to allow for precise monitoring of jacking and subsidence caused by permafrost degradation and dynamics. The study site at Prudhoe Bay, Alaska includes more than 60,000 horizontal pipeline supports. The known loc

APA, Harvard, Vancouver, ISO, and other styles

9

Evens, Tim, Pol Vanwersch, Sylvie Castagne, and Albert Van Bael. Material selection for injection molding hollow microneedles. Universidad de los Andes, 2024. https://doi.org/10.51573/andes.pps39.gs.im.4.

Full text

Abstract:

Hollow microneedles are designed to perform intradermal medical substance delivery or fluid extraction, with polymers standing out as cost-effective materials for mass production via injection molding. However, existing research lacks a comparative analysis of different polymers in terms of processability and performance in skin penetration tests. This study addresses this gap by evaluating hollow microneedles fabricated from five biocompatible thermoplastic materials: polycarbonate (PC), polybutylene terephthalate (PBT), polylactic acid (PLA), polyamide 12 (PA12), and glass-fiber reinforced p

APA, Harvard, Vancouver, ISO, and other styles

10

Okulitch, A. V., J. J. Packard, and A. I. Zolnai. Late Silurian-Early Devonian Deformation of the Boothia Uplift [Chapter 12: Silurian-Early Carboniferous Deformational Phases and Associated Metamorphism and Plutonism, Arctic Islands]. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1991. http://dx.doi.org/10.4095/133981.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!