Log in

Relevant bibliographies by topics / Degree of deformation / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Degree of deformation.

Dissertations / Theses on the topic 'Degree of deformation'

Author: Grafiati

Published: 28 May 2022

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 16 dissertations / theses for your research on the topic 'Degree of deformation.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Anderlini, Letizia <1985&gt. "Kinematic models of interseismic deformation from inversion of GPS and InSAR measurements to estimate fault parameters and coupling degree." Doctoral thesis, Alma Mater Studiorum - Università di Bologna, 2014. http://amsdottorato.unibo.it/6554/1/anderlini_letizia_tesi.pdf.

Full text

Abstract:

We have used kinematic models in two Italian regions to reproduce surface interseismic velocities obtained from InSAR and GPS measurements. We have considered a Block modeling, BM, approach to evaluate which fault system is actively accommodating the occurring deformation in both considered areas. We have performed a study for the Umbria-Marche Apennines, obtaining that the tectonic extension observed by GPS measurements is explained by the active contribution of at least two fault systems, one of which is the Alto Tiberina fault, ATF. We have estimated also the interseismic coupling distribut

APA, Harvard, Vancouver, ISO, and other styles

2

Anderlini, Letizia <1985&gt. "Kinematic models of interseismic deformation from inversion of GPS and InSAR measurements to estimate fault parameters and coupling degree." Doctoral thesis, Alma Mater Studiorum - Università di Bologna, 2014. http://amsdottorato.unibo.it/6554/.

Full text

Abstract:

We have used kinematic models in two Italian regions to reproduce surface interseismic velocities obtained from InSAR and GPS measurements. We have considered a Block modeling, BM, approach to evaluate which fault system is actively accommodating the occurring deformation in both considered areas. We have performed a study for the Umbria-Marche Apennines, obtaining that the tectonic extension observed by GPS measurements is explained by the active contribution of at least two fault systems, one of which is the Alto Tiberina fault, ATF. We have estimated also the interseismic coupling distribut

APA, Harvard, Vancouver, ISO, and other styles

3

Ozen, Onder Garip. "Influence Of Filtering On Linear And Nonlinear Single Degree Of Freedom Demands." Master's thesis, METU, 2006. http://etd.lib.metu.edu.tr/upload/12607842/index.pdf.

Full text

Abstract:

Ground-motion data processing is a necessity for most earthquake engineering related studies. Important engineering parameters such as the peak values of ground motion and the ordinates of the response spectra are determined from the strong ground-motion data recorded by accelerometers. However, the raw data needs to be processed since the recorded data always contains high- and low-frequency noise from different sources. Low-cut filters are the most popular ground-motion data processing scheme for removing long-period noise. Removing long-period noise from the raw accelogram is important si

APA, Harvard, Vancouver, ISO, and other styles

4

Wang, Jie. "Geometry of general curves via degenerations and deformations." The Ohio State University, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=osu1291067498.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Савчук, Е. С., та Н. М. Шкатуляк. "Текстурные особенности объемных наноструктурных материалов, полученных винтовой экструзией". Thesis, Сумский государственный университет, 2017. http://essuir.sumdu.edu.ua/handle/123456789/63910.

Full text

Abstract:

Целью данной работы является изучение текстуры и ее неоднородности в ферритной стали 10Г2 и сплава алюминия АД31 после винтовой экструзии (ВЭ), которая позволяет получить объемный ультра мелкодисперсный материал (УМЗ) с элементами структуры размером 10-1000 нм. Матрица с винтовым каналом имела параметры βmax = 60°, h = 50 мм. Поперечное сечение матрицы постоянно вдоль и перпендикулярно к оси прессования (ось ВЭ). Угол β = 0 на начальных и конечных участках матрицы.

APA, Harvard, Vancouver, ISO, and other styles

6

Adamson, Thomas Keeley. "Structural development of the Dun Mountain Ophiolite Belt in the Permian, Bryneira Range, western Otago, New Zealand : a thesis submitted in partial fulfilment of the requirements for the degree of Master of Science in Geological Science at the University of Canterbury /." Thesis, University of Canterbury. Geological Sciences, 2008. http://hdl.handle.net/10092/1587.

Full text

Abstract:

The deformed Permian Dun Mountain Ophiolite Belt (DMOB) forms the basement of the Dun Mountain-Maitai terrane and is traceable through the entire length of New Zealand. The DMOB contains a variably serpentinised mantle portion and a crustal portion containing gabbros, dolerites, cross cutting dikes and extrusives, together they are similar to oceanic crust. The initial crustal portion, however, is atypical when compared to other ophiolites, being thin and lacking a sheeted dike complex, but has well spaced inclined intrusive sheets and sills. At least four post-Permian deformation periods affe

APA, Harvard, Vancouver, ISO, and other styles

7

Persson, Ann-Sofie. "Flow and Compression of Granulated Powders : The Accuracy of Discrete Element Simulations and Assessment of Tablet Microstructure." Doctoral thesis, Uppsala universitet, Institutionen för farmaci, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-208808.

Full text

Abstract:

Simulations are powerful and important tools for gaining insight into powder processes. Ultimately, simulations have the potential to replace experiments. Thus, accurate models and insight into the essential factors for descriptions of powder behaviour are required. In this thesis, discrete element method (DEM) simulations of granule flow and compression were evaluated to deduce parameters and potential models essential for the experimental and numerical correspondence. In addition, the evolution in tablet microstructure during compression was studied using mercury porosimetry. Granule flow wa

APA, Harvard, Vancouver, ISO, and other styles

8

Залуцький, Сергій Зіновійович. "Обґрунтування параметрів шнеків з робочою еластичною поверхнею для транспортування сільськогосподарських матеріалів". Diss., Тернопільський національний технічний університет ім. Івана Пулюя, 2018. http://elartu.tntu.edu.ua/handle/lib/24784.

Full text

Abstract:

Дисертація присвячена теоретичному та експериментальному дослідженню технологічного процесу транспортування сипких матеріалів гвинтовими робочими органами із секційною еластичною поверхнею з метою підвищення експлуатаційних показників гвинтових конвеєрів. На основі виведених аналітичних залежностей обґрунтовано раціональні параметри взаємодії шнекового робочого органу з еластичними секціями із зерновим матеріалом форми півсфера-конус. Визначено зусилля деформації лопаті шнека при її взаємодії із зерниною еліпсоподібної форми, а також встановлені максимальні напруження, які виникають у зоні ко

APA, Harvard, Vancouver, ISO, and other styles

9

Stankevičiūtė, Diana. "Lietuvos svarbiausių magistralinių kelių eksploatacinių savybių kitimo analizė." Master's thesis, Lithuanian Academic Libraries Network (LABT), 2010. http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2010~D_20100622_145601-43211.

Full text

Abstract:

Prieš rengiant kelių investicinius projektus surenkami ir detaliai analizuojami esami kelių eksploatacinių rodiklių duomenys ir jų reglamentuotų norminių reikšmių atitiktis. Baigiamajame darbe išanalizuoti automobilių kelių asfaltbetonio dangos būklės, patikimumo bei šių rodiklių gavimo ir apdorojimo metodai. Pateikiamas automobilių kelių asfaltbetonio dangos reikiamų eksploatacinių rodiklių teorinis pagrindimas, reglamentuotos norminės reikšmės bei eksploatacinių rodiklių gerinimo svarba. Naudojantis tyrimų, atliktų Lietuvos svarbiausiuose magistraliniuose keliuose A1 Vilnius – Kaunas - Klaip

APA, Harvard, Vancouver, ISO, and other styles

10

Hajn, Jakub. "Parametrická studie chování konstrukce vinného sklepa." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226361.

Full text

Abstract:

In traditional wine village Bořetice recently occurred to serious disturbances on structures of wine cellars. These failures were caused by, among other things, changes in the properties of the rock environment. This work focuses on the implementation of parametric studies in terms of changing the properties of rock (soil) from the viewpoint of structural arrangement of the wine cellar.

APA, Harvard, Vancouver, ISO, and other styles

11

Geretto, Carlo. "The effects of different degrees of confinement on the deformation of square plates subjected to blast loading." Doctoral thesis, University of Cape Town, 2012. http://hdl.handle.net/11427/5541.

Full text

Abstract:

Includes abstract.<br>Includes bibliographical references.<br>This work relates to the effcts of the degree of confiement for air blasts only. The response of a structure subjected to a blast load is dependent on several factors; for instance stand off distance, geometry and mass of explosive, geometry of the structure, medium (air, water, soil) and degree of confinement. Depending on the location of the explosion relative to the surrounding structures different degrees of confinement are obtained. In addition, depending on the degree of confinement the accumulation of high temperature gas pro

APA, Harvard, Vancouver, ISO, and other styles

12

Surand, Martin. "Étude du comportement viscoplastique en traction et en fluage de l’alliage TA6V de 20 à 600 degrés Celsius." Thesis, Toulouse, INPT, 2013. http://www.theses.fr/2013INPT0096/document.

Full text

Abstract:

Les durées de vie classiques des pièces en aéronautique sont de plusieurs dizaines d’années. Cependant, certaines applications en marge impliquent des durées de vie bien plus courtes, sans réparation ou récupération des pièces. Les modèles de conception classiques doivent être adaptés et la démarche du choix matériau se faire « au juste besoin », autorisant l’utilisation des matériaux aux conditions limites de leur intégrité. Afin d’estimer ces limites, la caractérisation à plus hautes températures d’alliages existants est entreprise. C’est dans cette optique que se placent les travaux de thès

APA, Harvard, Vancouver, ISO, and other styles

13

Bassa, Bruno. "Contribution à l’étude d’éléments finis de type coque sans degrés de liberté en rotation ou à formulation solide pour des simulations numériques de l’emboutissage et du retour élastique." Thesis, Lyon, INSA, 2011. http://www.theses.fr/2011ISAL0113/document.

Full text

Abstract:

La thèse présente une méthodologie pour construire des éléments finis de type « solide-coque » avec intégration réduite en vue des applications à la simulation de la mise en forme tel que l’emboutissage des tôles où ces éléments finis doivent présenter de bonnes aptitudes à modéliser la flexion mais également les situations de laminage de la tôle. A partir des éléments volumiques à 8 nœuds et 3 degrés de liberté par nœud (les 3 composantes du déplacement), un neuvième nœud est rajouté au centre de l’élément. Ce neuvième nœud n’est pourvu que d’un seul degré de liberté, le déplacement le long d

APA, Harvard, Vancouver, ISO, and other styles

14

Yin, Nien-Chin, and 尹念秦. "Study of Degree of Saturation and Fine Content on Deformation and Liquefaction Potential for Back Filled Sand." Thesis, 1997. http://ndltd.ncl.edu.tw/handle/36951261140756218215.

Full text

Abstract:

碩士<br>國立交通大學<br>土木工程學系研究所<br>85<br>This thesis aims to investigate the dynamic deformability of sand under shaking by using Yuen-Lin Mai-Liao hydraulic-filled sand ,and predict the possible settlement in the field when it undergoes earthquake force. In order to match the real distribution of soil layer, this thesis prepares some soil specimens that have different conditions:(i) Degree of Saturation Sr=100%, 50% and 0% individually; (ii) The fine content =0% , 10% and 20% ;(iii) Relative Dens

APA, Harvard, Vancouver, ISO, and other styles

15

Duffy, Brendan. "Development of multi-channel analysis of surface waves (MASW) for characterising the internal structure of active fault zones as a predictive method of identifying the distribution of ground deformation : a thesis submitted in partial fulfilment of the requirements for the degree of Master of Science in Geology in the University of Canterbury /." 2008. http://hdl.handle.net/10092/2051.

Full text

Abstract:

Thesis (M. Sc.)--University of Canterbury, 2008.<br>Typescript (photocopy). Three folded leaves of ill. in pocket. Includes bibliographical references (leaves 175-185). Also available via the World Wide Web.

APA, Harvard, Vancouver, ISO, and other styles

16

Gonzalez, Alvaro. "An experimental study of the deformational and performance characteristics of foamed bitumen stabilised pavements : a thesis submitted in partial fulfilment of the requirements for the degree pf Doctor of Philosophy in the University of Canterbury /." 2009. http://hdl.handle.net/10092/3285.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!