Relevant bibliographies by topics / Density of cotton raw materials

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Density of cotton raw materials'

Author: Grafiati
Published: 5 June 2025
Last updated: 2 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Density of cotton raw materials.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Density of cotton raw materials"

1

Fayziev, Sirojiddin, Nafisa To’raeva, and Sitora Fatullayeva. "Theoretical and experimental study of the influence of temperature, humidity and density on the processes of drying, cleaning and filtration of cotton raw materials." Modern Innovations, Systems and Technologies 1, no. 4 (2021): 8–15. http://dx.doi.org/10.47813/2782-2818-2021-1-4-8-15.

Full text
Abstract:
The article presents information about existing problems and their solutions in the process of drying cotton raw materials at cotton gin plants, patterns of changes in the humidity of cotton raw materials at different values of the warm air velocity are obtained. The influence of the density of cotton raw materials and the relative air velocity on the change in the moisture loss coefficient at different temperatures of the air flow was investigated and it was established using a laboratory device that at a density of 0.5 g/cm3, the moisture loss process in cotton raw materials.
APA, Harvard, Vancouver, ISO, and other styles
2

Veliev, Fazil. "A study of the influence produced by the dynamics of the working bodies of cotton-processing machines on the cotton fibre quality." Eastern-European Journal of Enterprise Technologies 1, no. 1 (109) (2021): 68–76. http://dx.doi.org/10.15587/1729-4061.2021.224946.

Full text
Abstract:
Cotton mass is considered as a compressible porous two-component medium, consisting of a mixture of cotton fibres and air included in the porous medium, which is essential in dynamic treatment processes and requires consideration when planning technological modes.
 It was found that the speed of sound in multicomponent media significantly decreases with an increase in the content of the gaseous component. With a certain content of components, it can become less than in each of the components separately. This is due to the fact that with an increase in the content of the gaseous component,
APA, Harvard, Vancouver, ISO, and other styles
3

Fazil, Veliev. "A study of the influence produced by the dynamics of the working bodies of cotton-processing machines on the cotton fibre quality." Eastern-European Journal of Enterprise Technologies 1, no. 1(109) (2021): 68–76. https://doi.org/10.15587/1729-4061.2021.224946.

Full text
Abstract:
Cotton mass is considered as a compressible porous two-component medium, consisting of a mixture of cotton fibres and air included in the porous medium, which is essential in dynamic treatment processes and requires consideration when planning technological modes. It was found that the speed of sound in multicomponent media significantly decreases with an increase in the content of the gaseous component. With a certain content of components, it can become less than in each of the components separately. This is due to the fact that with an increase in the content of the gaseous component, the d
APA, Harvard, Vancouver, ISO, and other styles
4

Veliev, Fazil. "A theoretical method of describing the interaction of raw cotton with moving working bodies of cotton-cleaning machines." EUREKA: Physics and Engineering, no. 1 (January 19, 2023): 76–85. https://doi.org/10.21303/2461-4262.2023.002756.

Full text
Abstract:
A theoretical regularity of the general behavior of raw cotton as a porous medium in the technological processes of its mechanical processing is substantiated for the first time. The speed of sound in a porous cotton medium is determined. The effect of additional force stresses inside the cotton medium, caused by the filtration of the air component from cotton raw materials during the introduction of the working body, is disclosed. A generalized equation is obtained that describes the force stress in a cotton medium when exposed to a variety of shapes of working bodies of cotton machines. A me
APA, Harvard, Vancouver, ISO, and other styles
5

Fayziev, S.Kh, and O.O Nutfullayev. "INVESTIGATION OF QUALITY INDICATORS IN THE PROCESS OF COTTON RAW MATERIALS OF THE RIOT PROCESS." EURASIAN JOURNAL OF MEDICAL AND NATURAL SCIENCES 2, no. 1 (2022): 72–77. https://doi.org/10.5281/zenodo.5932701.

Full text
Abstract:
This article presents the results of research on the analysis of the impact of cotton and its components on the laws of change of thermal and physical parameters in the process of ginning cotton. The density of raw cotton has been found to depend on its moisture content, variety, type, method of picking, and shear forces.
APA, Harvard, Vancouver, ISO, and other styles
6

Veliev, Fazil. "A theoretical method of describing the interaction of raw cotton with moving working bodies of cotton-cleaning machines." EUREKA: Physics and Engineering, no. 1 (January 19, 2023): 76–85. http://dx.doi.org/10.21303/2461-4262.2023.002756.

Full text
Abstract:
A theoretical regularity of the general behavior of raw cotton as a porous medium in the technological processes of its mechanical processing is substantiated for the first time. The speed of sound in a porous cotton medium is determined. The effect of additional force stresses inside the cotton medium, caused by the filtration of the air component from cotton raw materials during the introduction of the working body, is disclosed. A generalized equation is obtained that describes the force stress in a cotton medium when exposed to a variety of shapes of working bodies of cotton machines. A me
APA, Harvard, Vancouver, ISO, and other styles
7

Veliev, Fazil, Esmira Mustafayeva, Anatoliі Mamontov, Vadim Shevtsov, Sergii Zinchenko, and Anatoliy Rud. "Development of a procedure for determination of damage to seeds and cotton fibers in cotton cleaning machines." EUREKA: Physics and Engineering, no. 4 (July 23, 2021): 125–33. https://doi.org/10.21303/2461-4262.2021.001944.

Full text
Abstract:
Studies on the dynamic state of cotton raw materials when introducing working bodies of processing machines into it allow to draw the following proposition. Depending on the rate of penetration of the working body into the cotton medium and the density of the medium, in the formulas used to describe the state of the medium, the exponent у ρ can vary from 1.5 to 3. The exponent for density ρ is a measure of the compression and compaction of raw materials on the surface of the working body. The exponent of ρ is also related to the amount of damage to cotton fibers and seeds. For the first time,
APA, Harvard, Vancouver, ISO, and other styles
8

Rakhmonov, Khayridin, Sirojiddin Fayziev, Murtazo Qodirov, Azamat Temirov, and Gulnoza Toyirova. "Development of a resource-saving technology allowing to increase the environmental sustainability of drying cotton raw materials." E3S Web of Conferences 390 (2023): 06019. http://dx.doi.org/10.1051/e3sconf/202339006019.

Full text
Abstract:
The article covers the principle of operation, as well as the results of theoretical research of the improved technology of the screw mixer-feeder unit of a new construction for the drying drum that allows the initial mixing of cotton raw materials with hot air and improves the ecological stability of the environment. The forces acting on the cotton pieces during the drying process have been determined. The graphs of the dependence of the amount of moisture release on the speed and density of hot air at different temperatures during the drying of cotton raw materials have been obtained. The la
APA, Harvard, Vancouver, ISO, and other styles
9

Veliev, Fazil, Esmira Mustafayeva, Anatoliі Mamontov, Vadim Shevtsov, Sergii Zinchenko, and Anatoliy Rud. "Development of a procedure for determination of damage to seeds and cotton fibers in cotton cleaning machines." EUREKA: Physics and Engineering, no. 4 (July 23, 2021): 125–33. http://dx.doi.org/10.21303/2461-4262.2021.001944.

Full text
Abstract:
Studies on the dynamic state of cotton raw materials when introducing working bodies of processing machines into it allow to draw the following proposition. Depending on the rate of penetration of the working body into the cotton medium and the density of the medium, in the formulas used to describe the state of the medium, the exponent у ρ can vary from 1.5 to 3. The exponent for density ρ is a measure of the compression and compaction of raw materials on the surface of the working body. The exponent of ρ is also related to the amount of damage to cotton fibers and seeds. For the first time,
APA, Harvard, Vancouver, ISO, and other styles
10

Sharibaev, Erkin, Akbar Abrorov, Bobir Otaboev, Nosir Sharibaev, and Abdunabi Daliev. "Experimental investigation of the relationship between raw shaft density and saw cylinder electric motor load current." Journal of Physics: Conference Series 2388, no. 1 (2022): 012174. http://dx.doi.org/10.1088/1742-6596/2388/1/012174.

Full text
Abstract:
Abstract In this research, the work was carried out to create and analyze mathematical models of steady technological processes in cotton cleaning, to obtain analytical expressions for the time of cotton and fiber processing and the time of turning raw materials into finished products. In addition, mathematical models for unstable technological processes in cotton cleaning were created and analyzed. Detailed information is provided on the technology of performing these works, the devices used, their operation, their efficiency, and ways to increase their efficiency.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Density of cotton raw materials"

1

ALBUQUERQUE, SERGIO M. de. "Estudo para o desenvolvimento e caracterização de concretos de mass específica elevada para proteção às radiações gama e X." reponame:Repositório Institucional do IPEN, 2014. http://repositorio.ipen.br:8080/xmlui/handle/123456789/11808.

Full text
Abstract:
Submitted by Claudinei Pracidelli (cpracide@ipen.br) on 2014-11-10T12:20:07Z No. of bitstreams: 0<br>Made available in DSpace on 2014-11-10T12:20:07Z (GMT). No. of bitstreams: 0<br>Tese (Doutorado em Tecnologia Nuclear)<br>IPEN/T<br>Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP
APA, Harvard, Vancouver, ISO, and other styles
2

Eden, Wolfgang [Verfasser]. "Einfluss der Verdichtung von Kalk-Sand-Rohmassen auf die Scherbenrohdichte von Kalksandsteinen = Influence of the compaction of calcium silicate raw materials on the structural density of calcium silicate masonry units / Wolfgang Eden." Kassel : Kassel University Press, 2011. http://d-nb.info/1017409080/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Ondříčková, Pavlína. "Vývoj nové technologie pískového pórobetonu s využitím druhotných surovin." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-372266.

Full text
Abstract:
Autoclaved sand aerated concrete is a modern building material with high thermal insulation properties. Only sand is used as the primary silicate component of aerated concrete in the Czech Republic. For the more favourable economic and ecological properties of aerated concrete, the use of secondary raw materials is used in this work. The secondary raw materials examined included fluidized bed and fly ash, slag and glass recycled. The aerated concrete composite with secondary admixtures was developed under hydrothermal conditions of a laboratory autoclave for 7 and 12 hours at 190°C. From the s
APA, Harvard, Vancouver, ISO, and other styles
4

HSU, SHUO-PIN, and 徐碩彬. "An Impact Study of Relationship Linkage on Customer Trust: The Case of Cotton Raw Materials Industry." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/6dfgwu.

Full text
Abstract:
碩士<br>國立高雄大學<br>亞太工商管理學系碩士班<br>106<br>As labor industry moves westward, textile industry in Taiwan has gradually became a declining industry. In such tough conditions, it is indeed a harsh challenge for cotton raw material suppliers to expand new business domestically. The only way to survive is to maintain relationship with existing customers in Taiwan or develop new customers internationally. This study explores the relationship between cotton raw material suppliers and customers, and explores the linkage method to gain customer trust. In cotton raw material industry, building customer trus
APA, Harvard, Vancouver, ISO, and other styles
5

Whitaker, Mark Douglas. "Raw materials and the division of labor or, cotton and wool differences in raw material substrate effects and urban industrialization outcomes - interrelating urban sociology, organizational sociology, environmental sociology, and social stratification /." 2000. http://catalog.hathitrust.org/api/volumes/oclc/47724869.html.

Full text
Abstract:
Thesis (M.S.)--University of Wisconsin--Madison, 2000.<br>Typescript. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 237-248).
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Density of cotton raw materials"

1

Raw Materials Research and Development Council (Nigeria), ed. Report on survey of selected agricultural raw materials in Nigeria: Cotton. Raw Materials Research and Development Council, Federal Ministry of Science and Technology, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Altman, Ida. The Spanish Atlantic, 1650–1780. Edited by Nicholas Canny and Philip Morgan. Oxford University Press, 2012. http://dx.doi.org/10.1093/oxfordhb/9780199210879.013.0011.

Full text
Abstract:
During the years from the mid-seventeenth to the end of the eighteenth century, the Spanish empire exhibited increasing economic diversity and robustness and maintained its dominant position among European empires in the Americas without serious challenge, notwithstanding Spain's eclipse as a military power in Europe and maritime power on the seas. In size alone, Spain's possessions in the Americas dwarfed those of any other colonising nation and indeed, despite some losses in the Caribbean, were growing both in territorial extent and in the size and density of populations. Spanish America loo
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Density of cotton raw materials"

1

Wilkening, Siegfried. "Maintaining Consistent Anode Density Using Varying Carbon Raw Materials." In Essential Readings in Light Metals. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-48200-2_22.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Wilkening, Siegfried. "Maintaining Consistent Anode Density Using Varying Carbon Raw Materials." In Essential Readings in Light Metals. John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118647745.ch22.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Ochilov, Makhsudjon, and Oybek Kholmuratov. "Experimental Determination of Cotton Raw Materials Separation in Improved Delivery Structure." In XV International Scientific Conference “INTERAGROMASH 2022”. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-21219-2_237.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Dama, Alessandro, Esra Abdelhalim Mohamed Khalfallaand, Andrea Alongi, and Adriana Angelotti. "Thermal Performance Characterization of Recycled Textile-Based Materials for Building Insulation." In Lecture Notes in Civil Engineering. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-69626-8_38.

Full text
Abstract:
AbstractThis study reports the experimental investigation of the heat transfer properties of building panels obtained from the post-consume textile waste through an Airlay process in the framework of a research project for the valorization of textile waste in the building sector. The analyzed panels are based on a different kind of textile fabric (mostly polyester, mostly cotton or mixed) and have a different density (low, medium and high). The heat transfer properties were measured through the dynamic methodology of the hot disc, both in laboratory conditions and in a climatic chamber. A good
APA, Harvard, Vancouver, ISO, and other styles
5

Santamaría-Vicario, Isabel, Belén Zurro-García, Ana María Paredes-Núñez, Carlos Junco Petrement, and Ángel Rodríguez Saiz. "Study and Characterization of Gypsum Mortars Made with Phenolic Melamine Polymer Wastes from the Decorative Paper Industry." In Springer Proceedings in Materials. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-72955-3_17.

Full text
Abstract:
AbstractThe proposed research studies the properties of gypsum mortars made with polymeric waste from the manufacturing process of high pressure laminated (HPL) thermosetting decorative panels, composed of cellulose paper layers impregnated with phenolic resins and melamine resins. The waste generated in the cutting, profiling and milling of the decorative panels is discarded and sent to landfill without a defined use. This research aims to contribute to the Circular Economy of Waste by recovering it as a raw material. Gypsum mortars are designed by adding different amounts of melamine waste.
APA, Harvard, Vancouver, ISO, and other styles
6

Grosse, Thomas, Ulrich Müller, Matthias Jakob, Florian Feist, Mathias H. Luxner, and Wolfgang Knoebl. "3d-Shaped High-Strength Parts from Partially Delignified and Densified Wood—Introduction of the Project HolzF3." In Zukunftstechnologien für den multifunktionalen Leichtbau. Springer Fachmedien Wiesbaden, 2024. https://doi.org/10.1007/978-3-658-45889-8_13.

Full text
Abstract:
AbstractThis study explores the potential of wood-based materials in sustainable lightweight automotive applications. The research focuses on overcoming the challenge of balancing complex three-dimensional design with component stiffness and strength in crash-relevant vehicle structures. The study investigates a novel approach involving partial delignification and subsequent densification of wood, previously shown to significantly enhance mechanical properties in solid wood. The HolzF3 project applies this technique to chipboard materials (strands) and small-diameter birch and beech wood, whic
APA, Harvard, Vancouver, ISO, and other styles
7

"Cotton." In Raw Materials And International Control, edited by H. R. G. Greaves. Routledge, 2017. http://dx.doi.org/10.4324/9781315098371-10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Ekpunobi, Uchenna, Christopher Ihueze, Philomena Igbokwe, et al. "Production of Electrical Porcelain Insulators from Local Raw Materials: A Review." In Clay and Clay Minerals [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.98902.

Full text
Abstract:
This paper reviewed the production of electric porcelain insulators utilizing from local raw materials from developing countries. The raw materials used were feldspar, quartz/silica and kaolin. The chemical composition, mineralogy, and thermal properties of the raw materials were characterized using AAS, XRD, and TGA respectively. Different weight percentage combinations of the individual raw materials were investigated by the authors. Most of the results showed relatively acceptable porcelain insulators properties such as low water absorption, porosity, high insulation resistance, dielectric
APA, Harvard, Vancouver, ISO, and other styles
9

Maneli A., Kupolati W.K., Ndambuki J.M., and Abiola O.S. "Influence of curing time and compaction on black cotton soil stabilized with fly ash, ground-granulated blast furnace slag and lime." In Construction Materials and Structures. IOS Press, 2014. https://doi.org/10.3233/978-1-61499-466-4-575.

Full text
Abstract:
The influence of curing time and compaction efforts on black cotton soil stabilized with optimum percentages of two industrial wastes activated with lime were evaluated in this paper. Fly ash (FA), ground granulated blast furnace slag (GGBFS) and lime at 12%, 8% and 1-9% respectively were used to stabilize black cotton soil in accordance to South Africa standards. Atterberg's limit, compaction and California bearing ratio (CBR) tests were conducted on the specimens. All the mixtures were compacted at optimum moisture content to different degrees of compaction and cured for 7, 28, 60 and 90 day
APA, Harvard, Vancouver, ISO, and other styles
10

Reichert, Daniel Steffen, and Kai Peter Birke. "The Role of Raw Materials in Enhancing or Limiting Energy Density." In Precise Energy. WORLD SCIENTIFIC, 2025. https://doi.org/10.1142/9789811282058_0005.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Density of cotton raw materials"

1

Zach, Jiri, Petra Zachova, Jitka Peterkova, Vitezslav Novak, and Jindrich Havelka. "STUDY OF REACTION TO FIRE IN HYBRID_BASED CORE INSULATORS INTENDED FOR THE OF VACUUM INSULATION PANELS." In SGEM International Multidisciplinary Scientific GeoConference 24. STEF92 Technology, 2024. https://doi.org/10.5593/sgem2024/6.1/s26.45.

Full text
Abstract:
The core insulators of vacuum insulation panels are mostly made from inorganic raw materials with a high SiO2 content, either in the form of nanoparticles or microfibers, while the proportion of organics is usually up to 3 %. The contribution is devoted to the study of reaction to fire in hybrid insulation materials made from a combination of nano SiO2-based particulate raw materials and organic-based fibrous raw materials, where the total proportion of organics is significantly greater than 3 %. Considering that it is a mixture of inorganic nanoparticles and organic microfibers with a total h
APA, Harvard, Vancouver, ISO, and other styles
2

Alviar, Charles Edward L., and Blessie A. Basilia. "Optimization of Multi-Objective Response of FDM Fabricated PLA Parts with Morphological Investigation on the Effects of 3D Printing Parameters." In 2024 8th International Conference on Materials Engineering and Nano Sciences & 2024 8th International Conference on Material Engineering and Manufacturing. Trans Tech Publications Ltd, 2024. http://dx.doi.org/10.4028/p-rwxn09.

Full text
Abstract:
Additive manufacturing (AM) is a process of generating prototypes or usable parts with minimum amount of material, technology, and time. The forerunner for technology and material for AM are Fused Deposition Method (FDM) and Polylactic Acid (PLA), respectively. There are numerous works in FDM devoted to studying the effect of processing conditions on the part strength. However, no significant effort has been made to develop an understanding of the effects of the nozzle diameter, extrusion temperature, infill percentage, infill pattern, and the number of outer shells in minimizing print time &a
APA, Harvard, Vancouver, ISO, and other styles
3

Yahya, Hamdan, Aspaniza Ahmad, Muhammad Afiq Afandi Abdul Aziz, and Malek Selamat. "Effect of Calcite Addition on the Mechanical Strength of Corundum-Mullite Ceramics." In International Conference on X-Rays and Related Techniques in Research and Industry 2023. Trans Tech Publications Ltd, 2025. https://doi.org/10.4028/p-z9yfky.

Full text
Abstract:
Efforts to reduce the usage of imported raw materials in the ceramic industry have encouraged usage of local calcite minerals for production of refractory ceramic products. Corundum-mullite ceramics as refractory products were prepared by using clay, alumina and calcite mineral (CaO) via powder pressing method. The effect of CaO addition from 2.9 to 6.5 wt.% (R1, R2 &amp; R3) on the mechanical strengths such as bulk density, apparent porosity, firing shrinkage and compressive strength were systematically studied as well as the reheat shrinkage and crystallinity of mullite ceramic bodies. The r
APA, Harvard, Vancouver, ISO, and other styles
4

Neves, M. M., J. L. Cunha, P. M. Arezes, et al. "IN2TEC: A Multidisciplinary Research Project Involving Researchers, Students and Industry." In ASME 2006 International Mechanical Engineering Congress and Exposition. ASMEDC, 2006. http://dx.doi.org/10.1115/imece2006-14916.

Full text
Abstract:
Bearing in mind that undergraduate students must get involved in research and that local industry must be a university partner, the School of Engineering, from University of Minho, has taken the initiative in funding some technical research projects in specifically defined areas (http://www.eng.uminho.pt). In this context, one of the projects founded concerns the development and testing of functional knitting which can be used with success in the lining of a shoe. The study of shoe comfort is of great importance to sport and leisure footwear manufactures, because in these particular situations
APA, Harvard, Vancouver, ISO, and other styles
5

Herrington, Thelma M. "The Surface Potential of Cellulose." In Papermaking Raw Materials, edited by V. Punton. Fundamental Research Committee (FRC), Manchester, 1985. http://dx.doi.org/10.15376/frc.1985.1.165.

Full text
Abstract:
Charge/pH isotherms were determined for various cellulose fibres: cotton linters, bleached sulphate, and unbleached sulphate pulp. The chare was determined as a function of pH in 1.0, 10⁻¹, 10⁻², and 10⁻³ mol dm⁻³ NaCl. The effect of various cations on the charge was also investigated. The surface areas of the fibres were determined by BET nitrogen adsorption; the pulps were initially in a ‘never-dried’ state and for the BET work they were specially prepared using solvent-exchange techniques whereby all the water was replaced by dry pentane. The surface areas of the fibres were also obtained u
APA, Harvard, Vancouver, ISO, and other styles
6

Steadman, R., and P. Luner. "The Effect of Wet Fibre Flexibility of Sheet Apparent Density." In Papermaking Raw Materials, edited by V. Punton. Fundamental Research Committee (FRC), Manchester, 1985. http://dx.doi.org/10.15376/frc.1985.1.311.

Full text
Abstract:
A new individual wet fibre flexibility test has been devised, and used to investigate the relationship between fines-free sheet apparent density and the wet flexibility of the constituent fibres. Linear relationships were found for a number of pulps, ranging from bleached chemical to thermomechanical, and for several different pulp treatments. It was concluded that changes in the average wet fibre flexibility of a particular pulp, caused by mechanical and/or chemical treatment, can be evaluated by measuring the apparent density of the fines-free sheet, at least over the investigated range (240
APA, Harvard, Vancouver, ISO, and other styles
7

Усманова, Х., and А. Тургунбаев. "MAINTAIN CONSISTENCY IN HUMIDITY CONTROL RAW COTTON." In Status and development trends of standardization and technical regulation in the world. Tashkent state technical university, 2022. http://dx.doi.org/10.51346/tstu-conf.22.1-77-0066.

Full text
Abstract:
The main of the most important conditions for improving product quality is to obtain reliable measurement information about the parameters, characteristics and properties of finished products, components, technological processes, raw materials and materials. The article proposes an option for solving the problem of metrological provision of microwave moisture meters for cotton materials
APA, Harvard, Vancouver, ISO, and other styles
8

Vasconcellos Dias, R. L., and E. Claudio-da-Silva. "Pulp and Paper Properties as Influenced by Wood Density -Same Species and Age of Eucalyptus." In Papermaking Raw Materials, edited by V. Punton. Fundamental Research Committee (FRC), Manchester, 1985. http://dx.doi.org/10.15376/frc.1985.1.7.

Full text
Abstract:
A substantial amount of research has allowed the introduction of efficient techniques, for genetic improvement of trees from Eucalyptus species. The basic density of wood has been identified as one of the main hereditary characteristics, to be employed as an important selection parameter for propagation of new forests. An important part of this program is the evaluation of the effect of various chemical and anatomical properties, which may be associated with wood basic density, upon industrial aspects of the production of pulp and paper. The influence of wood basic density on chemical and anat
APA, Harvard, Vancouver, ISO, and other styles
9

Salmén, Lennart, Christer Fellers, and Myat Htun. "The In-Plane and Out-of-Plane Hygroexpansional Properties of Paper." In Papermaking Raw Materials, edited by V. Punton. Fundamental Research Committee (FRC), Manchester, 1985. http://dx.doi.org/10.15376/frc.1985.2.511.

Full text
Abstract:
This paper describes some studies of the effects of drying restraints and sheet density on the in-plane and out-of-plane hygroexpansivity of paper. It is shown that drying restraints in the RTE range, i.e. between 20% and 0% moisture content, greatly influence hygroexpansivity, with in-plane hygroexpansivity being lower the lower the RH to which the paper has been dried under restraint. For sheets of high density, the volume expansivity is not of affected by the drying restraint, and the reduction in in-plane hygroexpansivity is compensated by an increase in out-of-plane hygroexpansivity. For
APA, Harvard, Vancouver, ISO, and other styles
10

Kibblewhite, R. P. "Qualities of Kraft and Thermomechanical Radiata Pine Papermaking Fibres." In Papermaking Raw Materials, edited by V. Punton. Fundamental Research Committee (FRC), Manchester, 1985. http://dx.doi.org/10.15376/frc.1985.1.93.

Full text
Abstract:
This review examines the extent to which wood property variation in New Zealand’s radiata pine resource determines pulp quality. The qualities of radiata pine papermaking fibres are very dependent on their original position within a tree (growth rings from pith and/or height in tree), as well as the geographic altitude and latitude of sites on which the trees are grown. Two categories of radiata pine pulpwood are recognised in New Zealand: slabwood of high basic density from the outside of sawlogs; and corewood of relatively low basic density from the smaller logs (non-sawlogs) of the upper pa
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Density of cotton raw materials"

1

Finkelstain, Israel, Steven Buccola, and Ziv Bar-Shira. Pooling and Pricing Schemes for Marketing Agricultural Products. United States Department of Agriculture, 1993. http://dx.doi.org/10.32747/1993.7568099.bard.

Full text
Abstract:
In recent years there has been a growing concern over the performance of Israel and U.S. agricultural marketing organizations. In Israel, poor performance of some marketing institutions has led to radical reforms. Examples are the two leading export industries - citrus and flowers. In the U.S., growth of local market power is eliminating competitive row product prices which served as the basis for farmer cooperative payment plans. This research studies, theoretically, several aspects of the above problem and develops empirical methods to assess their relative importance. The theoretical part d
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Density of cotton raw materials' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography