Academic literature on the topic 'Denture Precision Attachment'

Satisfactory restoration in a patient with a partially edentulous situation can be challenging especially when unilateral or bilateral posterior segment of teeth is missing. Successful restoration can be done with various conventional and contemporary treatment options. One such treatment modality is attachment-retained cast partial dentures. This paper describes a case report of a patient with maxillary bilateral distal extension edentulous span restored with a cast partial denture having an extracoronal castable precision attachment (RHEIN 83 OT CAP attachments system).

ABSTRACT Aim To investigate the importance of attachment types on the retention loss of extracoronal attachment-retained removable partial dentures depending on the usage period. Materials and methods In order to observe the retention loss of 5 different attachments (OT Strategy, OT Strategy-metal protected, Vario-stud-snap and Vario-soft 3 and ERA-RV) over time, attachment-retained partial dentures representing Kennedy II mod. I case were placed in a custom-made, retention test machine. For each minute, eight separating and joining movements were performed and retention values (Newton) of the attachments were recorded by computer. The retention tests implemented in 540,1080 and 2160 cycles. The data were evaluated statistically according to the two-way ANOVA and Tukey parametrical tests. Results The slide type attachment providing the best retention force was observed to be the most worn out by this process (p < 0.01) while the ball type attachments, which typically have the lesser retention force, showed less retention loss (p < 0.01). Conclusion It can be concluded that the retention attributes of the attachment-retained dentures were affected by the specific type of precision attachment as well as the usage period. Clinical significance Precision attachments with ball-type plastic matrices may be recommended for the clinical use due to their retention stability over time. How to cite this article Can G, Özmumcu B, Altinci P. In vitro Retention Loss of Attachment-retained Removable Partial Denture. J Contemp Dent Pract 2013;14(6):1049-1053.

Among the numerous techniques of oral rehabilitation, precision attachments are considered as a good treatment option in removable (RPD) as well as fixed partial dentures (FPD). Precision attachments enhance patient’s self-confidence and selfimage as they help in facilitating aesthetic, functional and retentive replacement of teeth that are missing in the oral cavity. They can improve the aesthetics by eliminating the clasp assembly in cast partial dentures (CPD). This particular case report explains the treatment sequence and approach for the utilisation of attachments in a Kennedy Class 2 situation. A successful removable partial denture includes a precise diagnosis with meticulous treatment planning. However, re-establishment of partially edentulous arch is particularly challenging in distal extension situations classified as Kennedy’s class 1 or 2 conditions.1 In such clinical cases, where a fixed prosthesis cannot be fabricated, a prosthodontist often suggests an implant retained prosthesis that is not routinely possible because of the insufficient available bone width and height.2 Thus to ensure functional and aesthetic substitution of lost teeth, an attachment secured RPD can be considered as a good treatment option in such cases. Attachments are constructed in a ready to place form (pre-fabricated) known as precision attachments. Another one is semi precision attachment where the segments have to be constructed by dentists or dental technicians because it requires casting for incorporating into fixed unit of restoration.3 Hence precision attachments are considered as possible alternatives when patients demand for a fixed restoration in distal extension cases. Various extra coronal attachments are available and used in distal extension cases. Preci-Sagix is considered as an ideal extra coronal attachment for removable partial dentures and also in over denture cases. It is accessible in two sizes, 1.7 mm mini or 2.2 mm standard and is selected according to the permitted space. The male component is available in three varieties, a plastic castable pattern (any hard alloy), cast to no prax (only non-precious alloy) and a threaded male and base ring (2.2 mm size only).4 These attachments produce vertical, horizontal and rotational movements during its function which supports the prosthesis by transferring harmful forces from the abutments to the supporting structures by its passive movement, which helps in the rehabilitation of distal extension cases.5 This case report explains restoration of partially edentulous arch by incorporating a Preci Sagix attachment in mandibular cast partial denture retained by a six-unit FPD and a maxillary conventional cast partial denture.

Successful restoration can be done with plenty of contemporary and conventional treatment planning. Attachment retained partial dentures are one such kind of treatment modality in prosthodontics. Studies have also demonstrated that precision-attachment partials last longer, wear less, need fewer adjustments, look better, work better, less destructive, protect abutment teeth, and are easier to clean. In this case report patients functional and aesthetic expectations were met by using a combination of Porcelain fused to metal (PFM) restorations and semi-precision attachments.

In the case of losing many teeth and the residual teeth have short clinical crown, design of the denture may hybriddenture. Hybrid denture is a removable partial denture with metal frame which have retention in the form ofprecision attachment. In short clinical crown, placement of crowns and the use of traction can be a problem,because there is no or lack of retention. In the manufacture of hybrid denture with precision attachment retention,using abutment with short clinical crowns is contraindicated. But in some literatures mentioned that the rest of theclinical crown height of not less than 2 mm can still be used as an abutment, but the abutments must be modified,such as making a longer preparation towards cervical edge. In several studies and literature, it is mentioned that toimprove the retention of the crown, the axial wall of abutment must be 4-6°. This article is aimed to report the clinical success of using the hybrid denture on abutment teeth which have short clinical crowns in a patient woman

Retention for a denture on a ramus frame implant is usually less satisfactory. The friction between the frame and denture is not reliable. Locking-type attachments require manual dexterity, which could be a problem for many patients. This article presents a technique of cementing the stud-type attachments to the ramus frame to convert the retention mechanism from one that uses the friction between the acrylic resin and ramus frame to a conventional resilient precision attachment. The retention can also be adjusted by changing the nylon inserts.

BACKGROUND: Utilization of attachments in a removable partial denture is highly essential not only as a line of treatment but also as it has a remarkable impact on the denture’s durability during the function. The attachment should act as a stress breaking system preserving the abutment teeth. AIM: This consideration aimed to verify the convention of polyether ether ketone (PEEK) material as an attachment. MATERIAL AND METHODS: Four groups of different materials for both attachments and partial denture framework were fabricated and tested using strain gauges to compare between them according to the strains originated around both the abutment teeth and edentulous area. RESULTS: PEEK material is one of the esthetic materials used for fabrication of the framework of the RPD. On using it as a precision attachement is shows favorable stress distribution decreasing the strains around the abutment teeth and the alveolar ridge especially distal to the abutment teeth that was significantly reduced in comparison with the other treatment options. CONCLUSION: Utilization of PEEK material as both an attachment and framework decline the strains performed around the abutment teeth and over the edentulous ridge.

Use of attachment in providing retention to removable prosthesis is an old treatment modality with better success. It highly improves the comfort, aesthetic, function, and patient satisfaction, especially in the patients with long span edentulism where implants and fixed partial denture (FPD) are not indicated and cast partial dentures are barely satisfactory. Proper diagnosis and treatment planning is necessary for selection of appropriate attachment type. A comprehensive evaluation, multi-disciplinary approach and sequential treatment planning is needed for long-term successful outcome. This case report describes the use of an extra coronal semi-precision attachment to enhance retention of removable prosthesis.

Soluções auxiliares para higienização de próteses têm sido indicadas como método efetivo no controle de biofilme. Desta forma, este estudo teve por objetivo avaliar se as soluções (Cepacol/C, Cepacol Flúor/CF, Listerine/L, hipoclorito de sódio 0,05%/HS e água deionizada/AD, como controle) potencializam a perda de retenção do o\'ring (Conexão Sistemas de Prótese Ltda). Foi obtida uma base de teflon com dois análogos e pilares o\'ring e contra-bases, compostas pelas cápsulas metálicas e anéis, foram confeccionadas e divididas em grupos (n=6). Foram simulados 90 dias de imersão overnight, sendo obtido o valor da resistência à tração a cada 30 dias, utilizando a máquina de ensaios mecânicos (Material Testing System MTS 810), totalizando 4 leituras (T0, T1, T2 e T3). Foi realizada análise qualitativa por meio de microscopia eletrônica de varredura em um espécime de cada grupo. Os dados da força de retenção (N) foram analisados estatisticamente pelos testes ANOVA e Bonferroni (α=0,05). Os resultados demonstraram que a retenção diminuiu significativamente com o tempo (P=0,0001) e com o uso das soluções (P=0,0000) e houve interação entre os fatores de variação (P=0,0245). A retenção no T0 (11,25) foi maior que no T1 (9,63), T2 (8,76) e T3 (8,40). No T1 foi maior que nos demais tempos e entre T2 e T3 não houve diferença significante. Entre as soluções avaliadas, o HS causou a maior redução da força de retenção (7,00). Os enxaguatórios C e L propiciaram médias similares (10,41 e 10,09, respectivamente) à AD (10,91). O CF propiciou resistência similar (9,14) aos enxaguatórios C e L. No C e no HS a retenção diminuiu significativamente a partir de 30 dias. No L e no CF, a diminuição da retenção ocorreu após 60 dias. Na AD, a retenção se manteve pelo período de 90 dias. Após 90 dias, o C propiciou retenção similar à água deionizada. As eletromicrografias apontaram alteração dos anéis: no do grupo do HS, houve presença de solução de continuidade do material e no do CF, formação de uma película com precipitados cristalinos. Conclui-se que após 3 meses de imersão, os valores obtidos em todas as soluções se apresentaram acima do mínimo indicado para a retenção (5 N), entretanto as soluções de hipoclorito de sódio 0,05% e Cepacol Flúor devem ser evitadas devido aos efeitos deletérios causados no material.
Denture cleansers have been widely indicated as an effective auxiliary method to biofilm control. The aim of this study was to evaluate the effect of these solutions Cepacol/C, Cepacol Fluor/CF, Listerine/L, 0,05% sodium hypochlorite/SH and deionized water /DA - control) on the retention loss of overdentures nytril o\'rings (Conexão Sistemas de Prótese Ltda). Teflon dies containing 2 implants and abutments and acrylic specimens with the metal caps were obtained and divided into the groups (n = 6). Ninety overnight soaks were performed simulating 3 months of care. At each 30 immersions, the peak load of tensile strength was registered (Material Testing System MTS 810), and 4 tests wereperformed (T0, T1, T2 e T3). Qualitative method by scanning electronic microscopy (SEM) was used for complementary analyzes. The data were statistically analyzed by the ANOVA and Bonferroni tests (α=0.05). The results showed that the retention decreased with time (P = 0.0001) and with the use of solutions (P = 0.0000) and there was interaction between variation factors (P = 0.0245). Retention in T0 (11.25) was higher than in T1 (9.63), T2 (8.76) and T3 (8.40). In T1, the retention was higher than in other times and between T2 and T3 no significant difference. Among the solutions evaluated, the HS caused the greatest reduction in retention force (7.00). The C and L rinses propitiated similar averages (10.41 and 10.09, respectively) to AD (10.91). The CF provided similar resistance (9.14) to C and L rinses In C and HS, the retention decreased significantly from 30 days. In CF and L, the retention decrease occurred after 60 days. In AD, the retention was maintained for 90 days. After 90 days, C promoted retention similar to deionized water. The electron micrographs showed alteration of the rings: in HS group, there was presence of a discontinuity of the material and in CF, there was a film forming with crystalline precipitates. It can be concluded that after 3 months of immersion, the values of all the solutions were above the minimum suitable for retaining (5 N), however, solutions of sodium hypochlorite 0.05% and Cepacol Fluor should be avoided due to deleterious effects on the material.

A imersão de overdentures em soluções de higienização diárias associadas a constantes inserções e remoções podem comprometer seus componentes. Em função disso, o objetivo deste estudo foi avaliar a capacidade retentiva de o′rings (Conexão Sistemas de Prótese, Ltda) quando submetidos a imersões em soluções e ciclagem mecânica. Foram avaliadas as soluções: Cepacol (C), Cepacol Flúor (CF), Listerine (L), Hipoclorito de sódio 0,05% (HS) e água deionizada (AD), como controle positivo e a não imersão (SI), como controle negativo. Foi obtida uma base de nylon 6.6 contendo dois pilares o′ring, com plataforma protética (HI) de implantes e contra-bases com as cápsulas metálicas e anéis de nitrilo, que foram divididas em grupos (n = 6). Foram simulados 180 dias de imersão overnight e realizados 720 ciclos de inserção e remoção, com ensaios de fadiga. O valor da resistência à tração foi registrado a cada 30 dias e 120 ciclos, utilizando-se máquina de ensaios mecânicos, totalizando 7 leituras (T0, T1, T2, T3, T4, T5, T6). Os dados da capacidade retentiva (N) foram analisados estatisticamente pelos testes ANOVA e Bonferroni (α=0,05). Os resultados demonstraram diferenças significativas para o tempo (p= 0,0000) e para as soluções (p= 0,0000) e para a interação tempo X solução (p=0,0192). A capacidade retentiva no T0 (8,41 N) foi maior que no T1 (6,94 N), T2 (6,87 N), T3 (6,66 N), T4 (7,02 N), T5 (5,84 N) e T6 (5,02). Em relação às soluções, o HS propiciou obtenção de maior capacidade retentiva (8,37 N) que os demais grupos: AD (6,68 N), L (6,52 N), SI (6,43 N), CF (6,28 N) e C (5,77 N). Quanto às interações, a capacidade retentiva inicial de todos os grupos, com exceção do HS, foi maior que a final, entretanto é prematuro recomendá-lo para uso como higienizador. Desta forma, conclui-se que o Listerine, Cepacol e Cepacol Flúor apresentaram comportamentos semelhantes aos grupos controles, sendo, portanto, bem indicados como soluções para imersão de overdentures.
Denture cleansers associated with constant insertion and removal of overdentures may have deleterious effects on its components. Therefore, the aim of this study was to evaluate the effect of these solutions and fatigue strength on the retention loss of overdentures o´rings (Conexão Sistemas de Prótese, Ltda). Effect of 5 solutions were studied: Cepacol (C), Cepacol Flúor (CF), Listerine (L), 0,05% sodium hypochlorite (SH) and deionized water (DA, positive control) and without immersion (WI, negative control). Nylon 6.6 matrices containing 2 implants and abutments and acrylic specimens with the metal caps were obtained and divided in 6 groups (n=6). One hundred eighty days overnight soaks were simulated and 720 pulls were performed in fatigues test. The dislodging force was evaluated at baseline (T0) and after every 30 immersions and 120 pulls, using testing machine. There were performed 7 tests (T0, T1, T2, T3, T4, T5 e T6). The data were statistically analyzed by ANOVA and Bonferroni tests (α=0.05). The results were differents with time (p= 0.0000), solutions (p= 0.0000) and also interaction (p=0.0192). The retention T0 (8.41 N) was higher than T1 (6.94 N), T2 (6.87 N), T3 (6.66 N), T4 (7.02 N), T5 (5.84 N) and T6 (5.02). For solutions, the HS showed a higher mean (8.37 N), followed by AD (6.68 N), L (6.52 N), SI (6.43 N), CF (6.28 N), and C (5.77 N). Regarding interactions, the initial retention groups were higher than the final, with the exception of HS, however it is premature to recommend it for use as a cleanser. Thus, it can be concluded that Listerine, Cepacol, Cepacol Fluor behaved similarly to the control groups, and therefore well indicated as solutions for overdenture immersions.

Soluções higienizadoras podem acarretar efeitos prejudiciais para as próteses, como deterioração da base da prótese e pigmentação. Porém, pouco se conhece sobre os efeitos destas na vida útil dos sistemas de retenção de uma overdenture. Deste modo, este estudo buscou avaliar se imersões diárias em clorexidina 2%, hipoclorito de sódio 1%, Corega® Tabs e água (controle) poderia acelerar a perda de retenção em attachments do tipo o´ring (S.I.N sistema de implantes®). Foram confeccionados 40 corpos de prova contendo cápsulas com anéis de borracha, simulando uma overdenture, e apenas 01 contendo o implante com o pilar o´ring. Eles foram separados em quatro grupos (n=10) e simulados noventa dias de imersões. Após, foram realizados testes de resistência à tração em uma máquina de ensaios mecânicos (MTS 810), antes e após a ciclagem com 270 ciclos, equivalentes a remoção e inserção da prótese três vezes ao dia, durante um período de três meses. Os resultados foram avaliados estatisticamente através dos testes ANOVA a dois critérios e do teste de Tukey (p≤0.05). Os valores médios (Newton) encontrados antes e após a imersão foram, respectivamente: Água - 9,482 / 6,081; Clorexidina - 9,972 / 7,390; Hipoclorito: 6,954 / 6,265 e Corega® Tabs: 12,464 / 11,121. Entre os grupos Clorexidina, Hipoclorito de sódio e Água não houve diferenças significativas. Houve diferenças estatisticamente significativas entre o grupo Corega® Tabs e os grupos controle e Hipoclorito de sódio, mas não com a Clorexidina. Assim, pôde-se concluir que soluções higienizadoras tiveram efeitos significativos na capacidade de retenção dos o´rings após o período simulado de três meses de imersão.
Denture cleansers can cause adverse effects on the prostheses, as deterioration of the denture base and pigmentation. However, little is known about its impacts on the life of an overdenture retention systems. Thus, this study sought to evaluate whether daily immersion in chlorhexidine 2%, sodium hypochlorite 1%, Corega® Tabs and water (control) would increase the retention loss in the O-ring type attachments (SIN implantes® system). Forty specimens containing capsules were made with rubber rings, simulating an overdenture, and only one containing the implant with the O-ring abutment. They were divided into four groups (n = 10) and ninety days in immersion were simulated, thereafter, conducted tensile strength tests on a testing machine (MTS - 810) before and after cycling of 270 cycles, equivalent to removal and insertion of the prosthesis three times a day for a period of three months. The results were statistically evaluated by the ANOVA two criteria and the Tukey test (p≤0.05). The mean values (Newton) found before and after immersion were: Water - 9,482 / 6,081; Chlorhexidine - 9,972 / 7,390; Hypochlorite: 6,954 / 6,265 and Corega® Tabs: 12.464 / 11.121. Among the groups chlorhexidine, sodium hypochlorite and water there were no significant differences. There were statistically significant differences between the group Corega® Tabs and controls and sodium hypochlorite groups, but not with the chlorhexidine. Thus, it concluded that denture cleansers had significant effects on retention capacity of orings after the simulated period of three months of immersion.

Made available in DSpace on 2014-07-29T15:21:59Z (GMT). No. of bitstreams: 1 dissertacao everaldo.pdf: 1049399 bytes, checksum: fe0d5a65718b57ccb2f6a6d2bf11cb9a (MD5) Previous issue date: 2008-07-18
The overdentures can be defined as total or partial removable dentures that cover root or osseo integrated implants rehabilitating the whole dentition. The mechanical retention in the removable partial overdentures (RPOs) is obtained through the use of cast clasps and attachments. This biomechanical principle has a great importance, since is inwardly associated with long term behavior and clinical performance of prosthesis and consequently, with comfort and satisfaction of the patients. So, the aim of this study was to assess the retention of metallic framework with simple circumferential claps associated intraradicular retainer with attachment type ERA (Extra coronal Resilient Attachment, Sterngold Implamed, Attleboro, EUA) in function of the metals based cobalt-chromium alloy (Co-Cr), titanium commercially pure (Ti cp) and nickel-chromium with titanium alloy (Ni-Cr with Ti), of the retentive undercuts of 0,25mm and 0,75mm and in function of the time of use in each simulated period (initial, 6 months, 1, 2, 3, 4 e 5 years). Through of metallic matrices representing a partially edentulous mandibular right hemi-arch segment constituted by the crown of the first molar, root of the inferior canine and with the absent of the premolars, were made 60 metallic frameworks being obtained 03 groups of each metal and subgroups representative of the 0,25mm and 0,75mm retentive undercuts of the circumferential clasp (totalizing 10 samples in each subgroup). Acrylic denture bases were constructed on the denture space and on the canine root that anchored the attachments and these received retentive capsules in the gray color of the system. Previously the mechanic tests, radiographic exams of the Ti cp frameworks were realized with the aim of detecting possible casting defects that could avert the posterior use. Next, the samples were mechanically tested simulating the insertion and removal of the framework using the testing apparatus designed at the Ribeirão Preto School of Dentistry (Testing apparatus, São Paulo University, Ribeirão Preto, Brazil), representing 5 years of simulated used. To simulate the intraoral conditions and realize the tests, a gadget fulfilled with artificial saliva was adapted in the testing apparatus. The retentive force data were recorded and submitted linear regression analysis and analysis of variance (ANOVA) to gauge a presence or not of significant differences and applied the Tukey complementary test 5% to comparison of the differences between the groups and subgroups. The groups of Ni-Cr with Ti and Co-Cr samples obtained most retentive mean with significant differences to group of Ti cp samples that obtained least retentive mean in every periods of time analyzed. To groups Ni-Cr with Ti and Co-Cr samples there was not significant difference of retention between the times analyzed free-standing of retentive undercuts (p > 0,05). In the group Ti cp samples there was significant difference of retention between the times analyzed just to subgroup samples with 0,75mm undercuts (p < 0,05). The Ni-Cr with Ti and Co-Cr samples with 0,75mm undercuts presented the most retentive mean and the Co-Cr samples with 0,25mm undercuts presented retention mean intermediate between biomechanical design in every periods of time analyzed. The Ti cp samples with 0,25mm undercuts presented the least retentive mean until second year of the analyze and the Ti cp samples with 0,75mm undercuts presented the least retentive mean of third until fifth year of the analyse. The circumferential claps casting in Ti cp used in 0,75mm undercuts have potential risk of fractures, mainly after the 2o year of use
As overdentures (sobredentaduras) podem ser definidas como próteses removíveis totais ou parciais, que cobrem raízes ou implantes osseointegrados reabilitando toda a dentição. A retenção mecânica nas overdentures parciais removíveis (OPRs) é obtida por meio da utilização combinada de grampos fundidos e encaixes. Este princípio biomecânico é de grande importância, visto que está intimamente relacionado com o comportamento e o desempenho clínico em longo prazo das próteses e conseqüentemente, com o conforto e satisfação dos pacientes. Assim, o objetivo deste estudo foi avaliar a retenção de estruturas com grampos circunferenciais simples associadas a retentores intra-radiculares com encaixe do tipo ERA (Extra coronal Resilient Attachment, Sterngold Implamed, Attleboro, EUA) em função dos metais à base de cobalto-cromo (Co-Cr), titânio comercialmente puro (Ti cp) e níquel-cromo com titânio (Ni-Cr com Ti), dos contornos retentivos de 0,25mm e 0,75mm e em função do tempo de uso em cada período simulatório (inicial, 6 meses, 1, 2, 3, 4 e 5 anos). A partir de matrizes metálicas representativas de uma hemi-arcada inferior direita parcialmente desdentada com as presenças da coroa do primeiro molar, raiz do canino e com os pré-molares ausentes, foram confeccionadas 60 estruturas metálicas sendo obtidos 3 grupos de cada metal e subgrupos representativos dos contornos retentivos de 0,25mm e 0,75mm do grampo circunferencial (perfazendo 10 amostras por subgrupo). Foram confeccionadas bases protéticas sobre o espaço protético e raiz do canino que ancoraram os encaixes e estes receberam as cápsulas retentivas de cor cinza do sistema. Previamente aos ensaios mecânicos, exames radiográficos das estruturas em Ti cp foram realizados para detectar possíveis defeitos de fundição que pudessem inviabilizar o uso posterior. Em seguida, as amostras foram ensaiadas mecanicamente simulando movimentos de inserção e remoção da estrutura utilizando uma máquina de ensaios projetada na Faculdade de Odontologia de Ribeirão Preto (Máquina de Ensaios, Universidade de São Paulo, Ribeirão Preto, Brasil), representando o uso simulado de 5 anos. Para simular as condições intrabucais e realizar os ensaios, um dispositivo preenchido com saliva artificial foi adaptado ao simulador. Os dados de força retentiva foram registrados e submetidos à análise de regressão linear e à análise de variância (ANOVA) para aferir a presença ou não de diferenças estatisticamente significativas e aplicado o teste de Tukey à 5% de probabilidade para comparação das diferenças entre os grupos e subgrupos. As amostras dos grupos em Ni-Cr com Ti e Co-Cr obtiveram as maiores médias de retenção com diferenças estatisticamente significantes para as amostras do grupo em Ti cp que obtiveram as menores médias de retenção em todos os períodos de tempo analisados. Para os grupos das amostras em Ni-Cr com Ti e Co-Cr não houve diferença de retenção estatisticamente significante entre os tempos analisados independente dos contornos retentivos (p > 0,05). No grupo das amostras em Ti cp houve diferença de retenção estatisticamente significante entre os tempos analisados apenas para as amostras do subgrupo com contorno retentivo de 0,75mm (p < 0,05). As amostras em Ni-Cr com Ti e em Co-Cr com contorno retentivo de 0,75mm apresentaram as maiores médias de retenção e as amostras em Co-Cr com contorno retentivo de 0,25mm apresentaram retenções médias intermediárias entre os desenhos biomecânicos em todos os períodos de tempo analisados. As amostras em Ti cp com contorno retentivo de 0,25mm apresentaram as menores médias de retenção até o segundo ano de análise e as amostras em Ti cp com contorno retentivo de 0,75mm apresentaram as menores médias de retenção do terceiro ao quinto ano de análise. Os grampos circunferenciais fundidos em Ti cp utilizados em contornos retentivos de 0,75mm tem um risco potencial de fraturas, principalmente após o 2o ano de uso

Made available in DSpace on 2014-06-11T19:28:58Z (GMT). No. of bitstreams: 0 Previous issue date: 2009-04-24Bitstream added on 2014-06-13T19:37:37Z : No. of bitstreams: 1 ferraco_r_me_araca.pdf: 1898873 bytes, checksum: a4b549caf699d7868a711624716d6212 (MD5)
A reabilitação de pacientes classe I de Kennedy mandibular através de Prótese Parcial Removível é de difícil resolução devido a diferença de resiliência existente entre o ligamento periodontal dos dentes suportes e a mucosa do rebordo residual. A inclinação do rebordo residual no sentido sagital pode influenciar na distribuição das tensões transmitidas pela incidência de cargas em próteses parciais removíveis de extremidade livre associadas a próteses parciais fixas. Na associação da prótese parcial removível com próteses parciais fixas, o profissional tem como alternativa aos grampos tradicionais, o uso de encaixes extra-coronários que podem melhorar a estética e o funcionamento biomecânico do conjunto. Desse modo, o objetivo desse estudo foi avaliar a característica da distribuição de tensões em próteses parciais removíveis mandibulares de extremidade livre associadas a próteses parciais fixas nos dentes suporte com diferentes sistemas de retenção: (1) grampo por ação de pontas; (2) sistema ASC-52; (3) sistema ERA; e (4) encaixe de semi-precisão Score-PD, pela metodologia da fotoelasticidade. E, analisar a distribuição de tensões em próteses parciais removíveis mandibulares de extremidade livre associadas a próteses parciais fixas nos dentes suporte com diferentes sistemas de retenção: (1) grampo por ação de pontas e (2) sistema ERA, variando duas inclinações de rebordo residual: (1) horizontal e (2) descendente distal. Cargas axiais de 100N foram aplicadas sobre os dentes das próteses parciais removíveis. As imagens das aplicações foram capturadas e a distribuição das tensões foi avaliada, pela formação das franjas fotoelásticas. No primeiro estudo, a prótese com encaixes de semi-precisão produziu os maiores níveis de tensão na região de ápice, entre as raízes dos últimos dentes suporte e na porção mais distal do rebordo...
The rehabilitation of patients mandibular class I of Kennedy through Removable Partial Denture is difficult to solve because the difference in strength between the periodontal ligament of the abutment teeth and the residual ridge mucosa. The inclination of the residual ridge towards sagital may influence the distribution of stresses transmitted by the incidence of loads in distal extension removable partial dentures associated with fixed partial dentures. In association removable partial denture – fixed partial dentures, the professional has as alternative to the traditional clasps, the use of extra-coronary attachments that can improve the aesthetics and the biomechanics. Therefore, the objective of this study was to evaluate the characteristic distribution of tensions in mandibular distal extension removable partial dentures (1) “I” bar clasps, (2) ASC-52system, (3) ERA system, and (4) semi-precision Score-PD system, by the methodology of photoelasticity. And, analyze the distribution of tensions in mandibular distal extension removable partial dentures associated to the fixed partial dentures in the abutment teeth with different retention systems: (1) “I” bar clasps and (2) ERA system, ranging from two inclinations residual ridge: (1) horizontal and (2) distal descending. Axial loads of 100N were applied on the teeth of removable partial dentures. The images of the applications were captured and distribution of stress was assessed by the formation of the photoelastic fringes. In the first study, the prosthesis with semi-precision attachment produced the highest levels of tension in the region of apex, between the roots of the abutment teeth and in the more distal portion of the residual ridge. The prostheses with resilient attachments showed the largest fringes formations in the cervical-distal of the last abutment tooth. In the second study, horizontal ridge presented... (Complete abstract click electronic access below)