To see the other types of publications on this topic, follow the link: Department of Geodesy and Geophysics.

Dissertations / Theses on the topic 'Department of Geodesy and Geophysics'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 35 dissertations / theses for your research on the topic 'Department of Geodesy and Geophysics.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Broermann, James, and James Broermann. "Alignment of post-Atlantic-rifting Volcanic Features on the Guinea Plateau, West Africa, and Present-Day Deformation in the Southwest United States from GPS Geodesy." Diss., The University of Arizona, 2017. http://hdl.handle.net/10150/626156.

Full text
Abstract:
Analysis of the alignment of geologic features and the use of GPS strain measurements are very different approaches to understanding crustal deformation histories and crustal and upper mantle properties. In this dissertation, two study areas with markedly different environments are evaluated using these approaches. The first study area includes the Guinea Plateau offshore West Africa that is part of a complex passive-margin system formed during two phases of rifting during the Jurassic and Cretaceous. Circular features revealed in two 3D seismic reflection surveys are interpreted to be extrusive volcanic features or vents emplaced after the cessation of Cretaceous rifting and opening of the Equatorial Atlantic Ocean. Statistically significant alignments of the vents implies that their distribution was influenced by faults or fractures not obvious in the seismic data alone. The existence of inferred alignments provides additional information about possible structures in the area of the volcanic vents that can be compared to more regional structures, giving better insight to magma migration and extrusion and structure of the Guinea Plateau. The alignment in one of the 3D survey areas is sub-parallel to oceanic fracture zones and continental lineaments that may extend into the survey and could have influenced the distribution of the volcanic features. The alignment in a separate 3D survey area is sub-parallel to the shelf-break and thought be related to inferred oceanward crustal thinning. Employing a different approach to the analysis of deformation, the second study area focuses on the Southern Basin and Range and Colorado Plateau, a weakly deforming area that is still capable of producing large earthquakes such as the 1887 Mw 7.5 Sonoran earthquake. To better constrain crustal motions and investigate the distribution of strain rates several hundred kilometers from the Pacific-North American plate boundary, an expanded GPS network of 34 sites was installed to complement existing continuous and campaign networks. Coseismic and postseismic deformation associated with earthquakes outside the study area, including the 4 April 2010 Mw 7.2 El Mayor–Cucapah, affected the GPS time series resulting in time-varying crustal surface velocities that obscured the background tectonic deformation. Through a deformation model, viscosities of the lower crust and upper mantle are estimated and the effects of earthquakes dating back to 1887 are removed from the time series to yield a time-independent or background secular velocity. A total velocity uncertainty is calculated that includes uncertainty of the time-independent velocities related to uncertainty in the viscosity estimates. Displacement histories are used to illustrate how earthquakes along the Pacific-North American plate boundary can temporarily impede extension in the Southern Basin and Range, particularly in southwestern Arizona. The time-independent velocities are used to calculate strain rates using latitudinal and longitudinal velocity profiles on one-degree increments. On a statistically significant basis, the velocity profiles are modeled with two linear segments rather than a single linear segment. Using the break points dividing the segments, the study area can be separated into a relatively lower-strain-rate eastern domain and a relatively higher-strain-rate western domain. The break points are interpreted to signify a boundary zone approximately 1000 km in length that overlaps tectonic and deformational boundaries described in previous studies. Comparing the time-invariant velocities with cumulative extensional slip rates of Quaternary faults across the area reveals a discrepancy in a portion of the area that is difficult to explain, but may be related to the time-varying velocities resulting from earthquakes on the Pacific-North American plate boundary.
APA, Harvard, Vancouver, ISO, and other styles
2

Kent, Tyler. "Comparing Deformation at Soda Lake Geothermal Field from GPS and 3D Seismic." Thesis, University of Nevada, Reno, 2013. http://pqdtopen.proquest.com/#viewpdf?dispub=1540191.

Full text
Abstract:

The transition between the two distinct structural regimes of the Walker Lane and the Basin and Range allows for complex transtensional fault interactions. The Carson Sink is the surface expression of the interaction of shear and extensional strains that cause both crustal extension and block rotation. This study investigates this tectonic shift at the Soda Lake geothermal field by comparing the direction and rate of deformation from both regional GPS and a 34 sq km 3D seismic survey. The GPS stations in the region estimate the strain field by comparing tensor solutions that show changing direction and magnitude of strain across the Carson Sink. Using stations surrounding the Soda Lake 3D seismic survey, the strain tensor produced is comparable in orientation to Basin and Range strain but has larger magnitudes. To quantify deformation within the Soda Lake 3D seismic survey, we calculate fault dip and offset of a deformed paleo-planer lacustrine mudstone. Plotting the mean dip direction of the faults in the seismic reflectivity, matches the mean surrounding GPS extensional direction, suggesting fault displacement is likely to be normal dipslip. Using a minimum age of 0.51 Ma from nearby sedimentation rates, the measured extension across the 5.4 km length of this study has a rate of 0.19 mm/yr. This is quite a high value for Basin and Range extension and it is likely a result of some influence from the Northern Walker Lane. The lack of an obvious piercing point for shear observed within the seismic volume precludes a clear estimate of strike-slip related motion within the Soda Lake 3D seismic survey. Clear extension and a large fault bend, indicates a localized relay ramp model. With focused extension indicated by two late Quaternary extrusive volcanic bodies, a model of a transtensional pull-apart basin is also considered. Given the few mapped intrabasinal faults at the surface, this study gives a unique view into fault offsets inside the Carson Sink.

APA, Harvard, Vancouver, ISO, and other styles
3

Frey, Sarah E. "Characterization of instabilities in the problem of elastic planetary tides." Diss., The University of Arizona, 2004. http://hdl.handle.net/10150/280697.

Full text
Abstract:
In 1911, A. E. H. Love published a linear elastic model for the tidal deformation of planetary bodies. Using numerical techniques that were unavailable to Love, surprising behaviors of the tidal solution have been found: tides of finite, even substantial, height are possible in the presence of an infinitesimal tide raiser, thus indicating some sort of instability. The Love tidal model was for the deformation of a homogeneous sphere. In order to better understand the nature of the instabilities in this model, I consider the effect of adding a radially dependent density profile to the model. For a given singularity, an increase in the initial density gradient causes the singularity to change locations in parameter space. For steep enough density gradient, the singularity is pushed outside the realm of physically meaningful parameter space for certain initial radial density profiles. Self-gravitation appears to be the likely mechanism for the driving of the tidal instability. The nature of the behavior of self-gravitation will be studied by considering an exact elastic formulation of the problem. In this way, a more complete view of the processes involved in the tidal deformation of a body can be explored. I find that each of the curves of singularity loci observed in the tidal problem correspond to instabilities in different modes for the exact elastic self-gravitation problem.
APA, Harvard, Vancouver, ISO, and other styles
4

Moore, Thomas Leonard. "Paleoclimate studies for controversial continental paleogeographies: The application of spherical geodesic grids and climate models to Gondwana's Devonian apparent polar wander path." Diss., The University of Arizona, 1999. http://hdl.handle.net/10150/284583.

Full text
Abstract:
Paleomagnetic data acquired in the last 10 to 15 years have failed to clearly delineate the Devonian apparent polar wander (APW) path for Gondwana. Consequently, many paleogeographers and paleomagnetists have turned to paleoclimate data to assist in locating Gondwana. Paleoclimate data have been used to either support proposed paleomagnetic-based positions for Gondwana or to independently position the continent. Both of these approaches have problems, including how paleoclimate data are handled and the assumption of a zonal climate system. Several improvements of these approaches are proposed in this study. First, paleoclimate data were grouped into occurrences using a spherical geodesic grid system when statistical manipulations were to be performed. The use of occurrences reduces errors caused by variations in sampling resolution and post-depositional processes. Grid cells in the spherical geodesic grid systems are near-equal area and shape. A comparison between spherical geodesic grid systems with other grid systems showed that the spherical geodesic grids were the most stable grid system if used in combination with a technique called rotational minimization, which finds the fewest possible occurrences for a given data set. Second, two techniques commonly used in paleogeographic studies were modified and a third technique was introduced. The first two techniques, called the palepole zonality method and the modified pole-finder method, were designed to rate proposed pole positions for Gondwana using latitude-distribution models for paleoclimate data. The final method, the parametric climate-model method, uses a conceptual climate model to predict the climate of the continent, which was compared to regional climate inference models. The results of these techniques when applied to Gondwana suggested that the continent moved little during the Devonian: the pole moved from west-central Gondwana in the Early Devonian to the northwest or to the east by the Carboniferous. The results also show, however, that all of these techniques are limited in their ability to pick a single position for Gondwana. Consequently, the best path identified by these methods cannot be assumed to be correct and confirming paleomagnetic data are still required.
APA, Harvard, Vancouver, ISO, and other styles
5

Evans, Eileen Louise. "Geodetic Imaging of Fault System Activity." Thesis, Harvard University, 2014. http://dissertations.umi.com/gsas.harvard:11414.

Full text
Abstract:
Geodetic observations provide kinematic constraints on the behavior of tectonically active fault systems. Estimates of earthquake cycle activity derived from these constraints may depend on modeling assumptions and/or regularization of a geodetic inverse problem, which is often poorly conditioned. Common model assumptions may affect kinematic solutions and conclusions about physical properties of faults and fault zones. For example, within a geometrically complex fault system, parameterization of nearby faults may affect slip estimates on an individual fault. In addition, fault slip models are often regularized by assuming that slip varies smoothly in space, which may artificially smear slip estimates beyond physical boundaries. As an alternative to smooth regularization, the applied mathematics field of compressed sensing provides a suite of methods for recovering sparse solutions. Applied to GPS observations of the 2011 Tohoku earthquake, compressed sensing algorithms enable imaging of spatially localized slip during and following the earthquake, and identification of a sharp boundary between coseismic and postseismic slip. Similar algorithms recover quantized solutions and may be applied to models of plate boundary deformation. Beginning with a dense array of tectonic micro-plates bounded by mapped faults in North America, these methods can be used to detect coherent motions of groups of micro-plates behaving as larger active blocks, effectively quantifying the complexity of North America plate boundary deformation. By improving our ability to identify and compare kinematic constraints on earthquake cycle processes, we are able to characterize the spectrum of earthquake cycle behaviors and gain a deeper understanding of earthquake phenomenology and physics.
Earth and Planetary Sciences
APA, Harvard, Vancouver, ISO, and other styles
6

Shuler, Harrey Jeong. "Recovery of the local gravity field by spherical regularization wavelets approximation and its numerical implementation." Thesis, The University of Texas at Austin, 2014. http://pqdtopen.proquest.com/#viewpdf?dispub=3615225.

Full text
Abstract:

As an alternative to spherical harmonics in modeling the gravity field of the Earth, we built a multiresolution gravity model by employing spherical regularization wavelets in solving the inverse problem, i.e. downward propagation of the gravity signal to the Earth's surface. Scale discrete Tikhonov spherical regularization scaling function and wavelet packets were used to decompose and reconstruct the signal. We recovered the local gravity anomaly using only localized gravity measurements at the observing satellite's altitude of 300 km. When the upward continued gravity anomaly to the satellite altitude with a resolution 0.5° was used as simulated measurement inputs, our model could recover the local surface gravity anomaly at a spatial resolution of 1° with an RMS error between 1 and 10 mGal, depending on the topography of the gravity field. Our study of the effect of varying the data volume and altering the maximum degree of Legendre polynomials on the accuracy of the recovered gravity solution suggests that the short wavelength signals and the regions with high magnitude gravity gradients respond more strongly to such changes. When tested with simulated SGG measurements, i.e. the second order radial derivative of the gravity anomaly, at an altitude of 300 km with a 0.7° spatial resolution as input data, our model could obtain the gravity anomaly with an RMS error of 1 ~ 7 mGal at a surface resolution of 0.7° (< 80 km). The study of the impact of measurement noise on the recovered gravity anomaly implies that the solutions from SGG measurements are less susceptible to measurement errors than those recovered from the upward continued gravity anomaly, indicating that the SGG type mission such as GOCE would be an ideal choice for implementing our model. Our simulation results demonstrate the model's potential in determining the local gravity field at a finer scale than could be achieved through spherical harmonics, i.e. less than 100 km, with excellent performance in edge detection.

APA, Harvard, Vancouver, ISO, and other styles
7

Lindsey, Eric Ostrom. "Fault properties, rheology and interseismic deformation in Southern California from high-precision space geodesy." Thesis, University of California, San Diego, 2015. http://pqdtopen.proquest.com/#viewpdf?dispub=3721663.

Full text
Abstract:

This dissertation presents the collection and processing of dense high-precision geode- tic data across major faults throughout Southern California. The results are used to inform numerical models of the long-term slip rate and interseismic behavior of these faults, as well as their frictional and rheological properties at shallow depths. The data include campaign surveys of dense networks of GPS monuments crossing the faults, and Interferometric Synthetic Aperture Radar (InSAR) observations from ENVISAT. Using a Bayesian framework, we first assess to what extent these data constrain relative fault slip rates on the San Andreas and San Jacinto faults, and show that the inferred parameters depend critically on the assumed fault geometry. We next look in detail at near-field observations of strain across the San Jacinto fault, and show that the source of this strain may be either deep anomalous creep or a new form of shallow, distributed yielding in the top few kilometers of the crust. On the San Andreas fault, we show that this type of shallow yielding does occur, and its presence or absence is controlled by variations in the local normal stress that result from subtle bends in the fault. Finally, we investigate shallow creep on the Imperial fault, and show that thanks to observations from all parts of the earthquake cycle it is now possible to obtain a strong constraint on the shallow frictional rheology and depth of the material responsible for creep. The results also suggest activity on a hidden fault to the West, whose existence has been previously suggested but never confirmed.

APA, Harvard, Vancouver, ISO, and other styles
8

Karegar, Makan A. "Theory and Application of Geophysical Geodesy for Studying Earth Surface Deformation." Thesis, University of South Florida, 2018. http://pqdtopen.proquest.com/#viewpdf?dispub=10839114.

Full text
Abstract:

An interdisciplinary approach at the interface between geodesy and geophysics has recently resolved several Earth science problems at regional and global scales. I use the term “geophysical geodesy” to distinguish the technical and theoretical aspect of geodesy from geophysical applications of geodetic techniques. Using a wide range of Earth observation data, I study the spatio-temporal characteristics of Earth surface deformation in the United States associated with several geophysical processes, including natural and anthropogenic subsidence and uplift, regional relative sea-level rise, and continental hydrological loading. The theoretical portion of this dissertation applies loading theory and develops a new hybrid method to improve the estimate of hydrologically-induced vertical deformation at time scales from sub-annual to multi-annual. The application part of this dissertation benefits from GPS and other geodetic and geologic data sets to study and model Earth’s surface uplift due to CO2 injection at an oil reservoir in coastal Texas, and coastal subsidence and nuisance flooding along the Mississippi River Delta and eastern seaboard of the United States.

APA, Harvard, Vancouver, ISO, and other styles
9

Heck, Jacob. "Geodesy, crustal deformation and neotectonic segmentation of the eastern Central Andes." The Ohio State University, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=osu154644714256979.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Shcherbenko, Gina Nicole. "Post-Seismic Strain and Stress Evolution from Continuous GPS Observations." Thesis, State University of New York at Stony Brook, 2014. http://pqdtopen.proquest.com/#viewpdf?dispub=1567846.

Full text
Abstract:

Strain evolution and stress evolution following the 4 April 2010 M7.2 El Mayor-Cucapah earthquake are modeled using an adaptation of the strain transient detection tool developed by Holt and Shcherbenko 2013. The evolution of stress is calculated from postseismic strains, which are modeled from continuous GPS horizontal displacements. Strain fields are modeled in 2 ways; the total strain field based on total observed cGPS displacements, and the residual strain field, which subtracts a reference field from the total model. The residual shows anomalous strains resulting from the postseismic relaxation of the 2010 event. Anomalous and total strains are modeled in 0.1 year epochs for 2.4 years following the event. Both total and anomalous strains are converted into stress changes over time, assuming elastic incompressible behavior. Following the El Mayor event, the GPS constrained strain evolution shows the following: (1) The Southern San Andreas experiences a reduced rate of right-lateral strike slip strain accumulation between 3 July 2010 and 7 August 2012 (Figure 16a-d). (2) The San Jacinto Fault has normal rate of right-lateral strike-slip strain accumulation during this time. (3) Before the Brawley swarm of 26 August 2012, the state of strain evolves to enable unclamping of a left-lateral fault zone in the Brawley Seismic Zone (Figure 16a-d). (4) Large shear strains accumulate on the Laguna Salada Fault (northernmost segment)/southern Elsinore FZ (Figure 16a-d). We converted the strain changes into Coulomb stress changes on existing faults (both right-lateral and left-lateral). Several regions show increased Coulomb stress changes throughout the postseismic process. Furthermore, the Coulomb stress changes on the faults in the region progressively increase toward failure up to the time of the Brawley swarm.

APA, Harvard, Vancouver, ISO, and other styles
11

O'Toole, Thomas Bartholomew. "Studies of earthquakes and microearthquakes using near-field seismic and geodetic observations." Thesis, University of Oxford, 2013. http://ora.ox.ac.uk/objects/uuid:9dcaca2e-c141-4e8a-94f6-34a9ff50d061.

Full text
Abstract:
The Centroid-Moment Tensor (CMT) method allows an optimal point-source description of an earthquake to be recovered from a set of seismic observations, and, for over 30 years, has been routinely applied to determine the location and source mechanism of teleseismically recorded earthquakes. The CMT approach is, however, entirely general: any measurements of seismic displacement fields could, in theory, be used within the CMT inversion formulation, so long as the treatment of the earthquake as a point source is valid for that data. We modify the CMT algorithm to enable a variety of near-field seismic observables to be inverted for the source parameters of an earthquake. The first two data types that we implement are provided by Global Positioning System receivers operating at sampling frequencies of 1,Hz and above. When deployed in the seismic near field, these instruments may be used as long-period-strong-motion seismometers, recording displacement time series that include the static offset. We show that both the displacement waveforms, and static displacements alone, can be used to obtain CMT solutions for moderate-magnitude earthquakes, and that performing analyses using these data may be useful for earthquake early warning. We also investigate using waveform recordings - made by conventional seismometers deployed at the surface, or by geophone arrays placed in boreholes - to determine CMT solutions, and their uncertainties, for microearthquakes induced by hydraulic fracturing. A similar waveform inversion approach could be applied in many other settings where induced seismicity and microseismicity occurs.
APA, Harvard, Vancouver, ISO, and other styles
12

Vazquez, Becerra Guadalupe Esteban. "GEODESY IN ANTARCTICA: A PILOT STUDY BASED ON THE TAMDEF GPS NETWORK, VICTORIA LAND, ANTARCTICA." The Ohio State University, 2009. http://rave.ohiolink.edu/etdc/view?acc_num=osu1236711490.

Full text
APA, Harvard, Vancouver, ISO, and other styles
13

Anderson, Eric Ross. "Analysis of rainfall-triggered landslide hazards through the dynamic integration of remotely sensed, modeled and in situ environmental factors in El Salvador." Thesis, The University of Alabama in Huntsville, 2013. http://pqdtopen.proquest.com/#viewpdf?dispub=1543417.

Full text
Abstract:

Landslides pose a persistent threat to El Salvador's population, economy and environment. Government officials share responsibility in managing this hazard by alerting populations when and where landslides may occur as well as developing and enforcing proper land use and zoning practices. This thesis addresses gaps in current knowledge between identifying precisely when and where slope failures may initiate and outlining the extent of the potential debris inundation areas. Improvements on hazard maps are achieved by considering a series of environmental variables to determine causal factors through spatial and temporal analysis techniques in Geographic Information Systems and remote sensing. The output is a more dynamic tool that links high resolution geomorphic and hydrological factors to daily precipitation. Directly incorporable into existing decision support systems, this allows for better disaster management and is transferable to other developing countries.

APA, Harvard, Vancouver, ISO, and other styles
14

Matos, Ana Cristina de Oliveira Cancoro de. "Implementação de modelos digitais de terreno para aplicações na área de geodésia e geofísica na América do Sul." Universidade de São Paulo, 2005. http://www.teses.usp.br/teses/disponiveis/3/3138/tde-10102005-104155/.

Full text
Abstract:
O objetivo desse trabalho de tese foi a coleta de novas informações e a avaliação de dados disponíveis, visando a análise das melhores alternativas para a obtenção de um modelo digital de terreno (MDT) para a América do Sul. O modelo compreendeu a parte continental e oceânica, limitada pelas latitudes de 60º S a 25º N e longitudes de 100º W a 25º W. Na área continental foram usadas informações provenientes de cartas topográficas digitalizadas, do recente modelo Shuttle Radar Topography Mission (SRTM) e do modelo disponível DTM2002. Na área oceânica foram utilizadas informações de profundidade do DTM2002, de cartas náuticas em diferentes escalas, folhas de bordo e o projeto LEPLAC, para o Brasil, e de cartas náuticas na Argentina. O trabalho ensejou um processo intensivo e exaustivo de comparação dos modelos existentes (SRTM, DTM2002, GLOBE, GTOPO30, ETOPO2, JGP95E, TERRAINBASE e ETOPO5) e das novas informações disponíveis. No estudo do SRTM analisou-se 2.013 quadrículas de 1ºX1º da região continental, obtendo-se para cada quadrícula os valores máximo e mínimo da altitude com suas respectivas posições, o valor médio e o número de pontos sem informação, além da representação 3D e do histograma das altitudes. Foi também realizada a comparação das altitudes interpoladas do modelo SRTM com os pontos GPS implantados ao longo dos rios Madeira, Solimões e Amazonas e com RNs na grande São Paulo. Com os oito MDTs citados foram construídos perfis longitudinais e latitudinais de toda a área continental passando sobre a altitude máxima de cada quadrícula do SRTM. Os modelos SRTM, DTM2002, GLOBE, GTOPO30, ETOPO2 e ETOPO5 foram comparados entre si nos pontos da grade em comum. Além disso, foram realizadas comparações utilizando uma importante fonte de informação altimétrica representada pela rede de nivelamento geométrico. As análises realizadas resultaram na geração de três modelos alternativos de MDT para a América do Sul. A opção do espaçamento da malha para a construção do modelo foi proveniente da compatibilização entre a capacidade computacional e o resultado esperado nas diferentes aplicações de um MDT. Além disso, foram implementadas duas aplicações específicas importantes na área de exploração mineral e no cálculo das alturas geoidais: a correção de terreno e o efeito indireto.
The objective of this thesis has been to collect new information and to evaluate available data in order to provide arguments in the analysis for the derivation of the best DTM for South America. The continental and oceanic part of a block limited by latitudes 60º S and 25º N and longitudes 100º W and 25º W is the object of the model. In the continental area data derived from topographic maps, the recent Shuttle Radar Topography Mission (SRTM) and the available DTM2002 model were used. In the oceanic area the depth data from DTM2002, nautical maps of different scales, boarding maps and LEPLAC project were used in Brazil and nautical maps in Argentina. The activities involved an intensive process of comparison between the existing models (SRTM, DTM2002, GLOBE, GTOPO30, ETOPO2, JGP95E, TERRAINBASE e ETOPO5) and the new information. With respect to SRTM 2,013 blocks of 1º X 1º in the continental area were analysed, deriving for each block the maximum and minimum values for the height with the respective position, the mean value and the number of points without information. The 3D representation as well as the histogram of the heights for each block is also presented. The GPS points established along the Amazonas, Solimões and Madeira rivers in Amazonas on the BMs in São Paulo area were also compared with SRTM interpolated values. SRTM, DTM2002, GLOBE, GTOPO30, ETOPO2 and ETOPO5 were also compared between themselves in the common points of the grid. Besides, an important comparison were carried out with the first order levelling network. After the analysis were finished three different DTM were generated for South America. The grid spacing were select envisaged a compatibilization between computer capacity and the applications requirements. Finally, two specific applications for mineral exploration and geoid computation were implemented: the terrain correction and the indirect effect.
APA, Harvard, Vancouver, ISO, and other styles
15

Yang, Qian. "Applications of Satellite Geodesy in Environmental and Climate Change." Scholar Commons, 2016. http://scholarcommons.usf.edu/etd/6440.

Full text
Abstract:
Satellite geodesy plays an important role in earth observation. This dissertation presents three applications of satellite geodesy in environmental and climate change. Three satellite geodesy techniques are used: high-precision Global Positioning System (GPS), the Gravity Recovery and Climate Experiment (GRACE) and Interferometric Synthetic Aperture Radar (InSAR). In the first study, I use coastal uplift observed by GPS to study the annual changes in mass loss of the Greenland ice sheet. The data show both spatial and temporal variations of coastal ice mass loss and suggest that a combination of warm atmospheric and oceanic condition drove these variations. In the second study, I use GRACE monthly gravity change estimates to constrain recent freshwater flux from Greenland. The data show that Arctic freshwater flux started to increase rapidly in the mid-late 1990s, coincident with a decrease in the formation of dense Labrador Sea Water, a key component of the deep southward return flow od the Atlantic Meridional Overturning Circulation (AMOC). Recent freshening of the polar oceans may be reducing formation of Labrador Sea Water and hence may be weakening the AMOC. In the third study, I use InSAR to monitor ground deformation caused by CO2 injection at an enhanced oil recovery site in west Texas. Carbon capture and storage can reduce CO2 emitted from power plants, and is a promising way to mitigate anthropogenic warming. From 2007 to 2011, ~24 million tons of CO2 were sequestered in this field, causing up to 10 MPa pressure buildup in a reservoir at depth, and surface uplift up to 10 cm. This study suggests that surface displacement observed by InSAR is a cost-effective way to estimate reservoir pressure change and monitor the fate of injected fluids at waste disposal and CO2 injection sites.
APA, Harvard, Vancouver, ISO, and other styles
16

Holtkamp, Stephen Gregg. "NEW METHODS FOR DETECTING EARTHQUAKE SWARMS AND TRANSIENT MOTION TO CHARACTERIZE HOW FAULTS SLIP." Miami University / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=miami1369741772.

Full text
APA, Harvard, Vancouver, ISO, and other styles
17

Ritzer, Jason Andreas. "The Topography, Gravity, and Tectonics of the Terrestrial Planets." Case Western Reserve University School of Graduate Studies / OhioLINK, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=case1278603504.

Full text
APA, Harvard, Vancouver, ISO, and other styles
18

Lecavalier, Benoit. "A Model of the Greenland Ice Sheet Deglaciation." Thèse, Université d'Ottawa / University of Ottawa, 2013. http://hdl.handle.net/10393/30362.

Full text
Abstract:
The goal of this thesis is to improve our understanding of the Greenland ice sheet (GrIS) and how it responds to climate change. This was achieved using ice core records to infer elevation changes of the GrIS during the Holocene (11.7 ka BP to Present). The inferred elevation changes show the response of the ice sheet interior to the Holocene Thermal Maximum (HTM; 9-5 ka BP) when temperatures across Greenland were warmer than present. These ice-core derived thinning curves act as a new set of key constraints on the deglacial history of the GrIS. Furthermore, a calibration was conducted on a three-dimensional thermomechanical ice sheet, glacial isostatic adjustment, and relative sea-level model of GrIS evolution during the most recent deglaciation (21 ka BP to present). The model was data-constrained to a variety of proxy records from paleoclimate archives and present-day observations of ice thickness and extent.
APA, Harvard, Vancouver, ISO, and other styles
19

Sobrero, Franco Sebastian. "Logarithmic and Exponential Transients in GNSS Trajectory Models as Indicators of Dominant Processes in Post-Seismic Deformation." The Ohio State University, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=osu153174766741719.

Full text
APA, Harvard, Vancouver, ISO, and other styles
20

Walters, Richard John. "Geodetic observation and modelling of continental deformation in Iran and Turkey." Thesis, University of Oxford, 2012. http://ora.ox.ac.uk/objects/uuid:39c0e88a-4f45-483a-b8e1-6a7dc3e9d41b.

Full text
Abstract:
In this thesis I use Interferometric Synthetic Aperture Radar (InSAR) and GPS geodetic observations, along with numerical models, to examine the distribution of strain, assess seismic hazard, and study the dynamics of deformation across Turkey and Iran. I measure interseismic strain accumulation across the Ashkabad fault using InSAR, and find that atmospheric corrections using MERIS (Medium Resolution Imaging Spectrometer) data are necessary in order to retrieve the tectonic signal in the presence of large atmospheric delays. I estimate a slip rate of 5-12 mm/yr for the Ashkabad fault which is faster than previous geodetic estimates. I also attempt to validate atmospheric corrections derived from the ERA-Interim numerical weather model and find that they do not work satisfactorily for this region. I produce InSAR-derived velocity maps for five overlapping tracks in Eastern Turkey, covering both the North Anatolian Fault (NAF) and East Anatolian Fault (EAF), and measure slip rates for the NAF and EAF of 20+/-3 mm/yr and 10+/-2 mm/yr respectively. I calculate a velocity field for Eastern Turkey from these InSAR data and a compilation of GPS data, and find that strain is mainly localised across the NAF and EAF and that there is negligible differential vertical motion across the Anatolian Plateau. I construct a thin viscous sheet model for Iran and find that the GPS velocity field is well described by deformation of a ductile lithosphere. Contrary to previous suggestions, a rigid central Iran is not required to match the kinematics of Iranian deformation, but buoyancy forces acting in the lithosphere are found to play an important role. I develop a new method to assess slip rates and therefore seismic hazard on major faults in Iran from this continuum model. In this thesis I have measured slip rates across three major strike-slip faults using InSAR; the first time this has been achieved for the Ashkabad fault and the EAF. I have demonstrated the importance of atmospheric correction for these results, and have shown that Iran deforms as a continuous medium.
APA, Harvard, Vancouver, ISO, and other styles
21

Zhou, Yu. "Investigating past and present continental earthquakes with high-resolution optical imagery." Thesis, University of Oxford, 2016. https://ora.ox.ac.uk/objects/uuid:2792e6e7-b1f9-4bd3-ad40-3dc96e113251.

Full text
Abstract:
Over the past few decades, remote sensing has emerged as a powerful tool for studying active faulting in continental regions. However, the commonly used remote sensing techniques, including radar interferometry, visual inspection of imagery, and image matching, cannot measure three-dimensional (3D) surface displacements in earthquakes, limiting our ability to investigate faulting. The improvement of very high-resolution (VHR) optical imaging systems (stereo in particular) in recent years has made it possible for earth scientists to measure 3D surface deformation remotely. In this thesis, I contribute to assessing the capability of VHR optical imagery, by determining earthquake deformation from four different types of earthquakes (different in sense of slip and date of the event). In the case of the 2010 Mw 7.2 El Mayor-Cucapah, Mexico earthquake, I show that digital elevation models (DEMs) derived from Pleiades stereo imagery are comparable to light detection and ranging (LiDAR) surveys, and differencing pre- and post-earthquake DEMs can measure 3D displacements, which will be very useful for studying future earthquakes. For the 2013 Mw 7.7 Balochistan, Pakistan earthquake, I determine the vertical motion from a post-earthquake Pleiades DEM and find constant fault kinematics throughout the Late Quaternary. This study has resolved a current controversy of the Balochistan earthquake, in which it has been argued that kinematics of the Hoshab fault switches between strike-slip and dip-slip. Applying historical aerial, KH-9 Hexagon spy satellite, SPOT-2 and modern SPOT-6 images to the 1978 Mw 7.3 Tabas-e-Golshan earthquake, I measure the coseismic and postseismic displacements, and show that the Tabas fold system in eastern Iran may exhibit characteristic slip behaviour. Combining Pleiades imagery, fieldwork and geological dating techniques, I determine slip in the 1556 Huaxian earthquake in China and the recurrence interval for similar events. These examples demonstrate the usefulness of high-resolution optical imagery in investigating past and present earthquakes.
APA, Harvard, Vancouver, ISO, and other styles
22

Young, Emma Victoria. "Determining the ability of terrestrial time-lapse microgravity surveying on a glacier to find summer mass balance using gravitational modeling." Master's thesis, Temple University Libraries, 2017. http://cdm16002.contentdm.oclc.org/cdm/ref/collection/p245801coll10/id/473458.

Full text
Abstract:
Geology
M.S.
Mass loss of alpine glaciers presently account for about half of the cryospheric contribution to the global sea-level rise. Mass balance of alpine glaciers has predominantly been monitored by; (1) glaciological and hydrological methods, and (2) satellite gravimetric methods using data from NASA’s Gravity Recovery and Climate Experiment (GRACE) satellite mission. However, the former can be logistically costly and have large extrapolation errors: measurements taken at monthly temporal scales are expensive and have a spatial resolution of roughly one kilometer. The latter provides monthly mass-balance estimates of aggregates of alpine glaciers, although the spatial resolution (~300 km) is far too coarse for assessing individual glaciers’ mass balance. Ground-based, time-lapse microgravity measurements can potentially overcome some of the disadvantages of the glaciological, hydrological, and satellite gravitational methods for assessing mass changes and their spatial distribution on a single glacier. Gravity models were utilized to predict the gravity signals of the summer-time mass balance, changes in the seasonal snow cover outside of the glacier, and the vertical gravity gradient (VGG) needed for the free-air correction on Wolverine Glacier, AK. The modeled gravity signal of the summer-time mass balance (average of -0.237 mGal) is more than an order of magnitude larger than the uncertainty of conventional relative gravimeters (±0.007 mGal). Therefore, modeling predict that the time-lapse gravitational method could detect the summer-time mass balance on Wolverine Glacier. The seasonal snow effect was shown to have the greatest influence (~ -0.15 mGal) on the outer 100 m boundary of the glacier and minimal effect (~ -0.02 mGal) towards the center, both larger than the uncertainty of relative gravimeters. The VGG has a positive deviation, about -0.1 to -0.2 mGal/m, from the normal VGG (-0.309 mGal/m). Thus, seasonal snow effect and VGG need to be correctly accounted for when processing gravity measurements to derive the residual gravity signal of the glacier mass balance. Accurate measurements of elevation changes, seasonal snow depth, and the VGG should be performed in future gravity surveys of glaciers.
Temple University--Theses
APA, Harvard, Vancouver, ISO, and other styles
23

Amarante, Rogério Rodrigues 1972. "Sistematização do processamento de dados gravimétricos aplicados a determinação do modelo geoidal." [s.n.], 2012. http://repositorio.unicamp.br/jspui/handle/REPOSIP/258364.

Full text
Abstract:
Orientador: Jorge Luiz Alves Trabanco
Tese (doutorado) - Universidade Estadual de Campinas, Faculdade de Engenharia Civil, Arquitetura e Urbanismo
Made available in DSpace on 2018-08-21T16:53:48Z (GMT). No. of bitstreams: 1 Amarante_RogerioRodrigues_D.pdf: 8479306 bytes, checksum: c6760b22f8c1f110ad1b61e48c59508b (MD5) Previous issue date: 2012
Resumo: Com o uso de métodos adequados, receptores GNSS podem determinar coordenadas com acurácia suficiente para aplicação em projetos de engenharia. Porém a altitude elipsoidal obtida não utiliza o mesmo sistema de referência da engenharia de transportes. A altitude elipsoidal pode ser transformada em ortométrica com a utilização de modelos geoidais que são gerados a partir de dados gravimétricos. Neste trabalho são apresentados alguns conceitos introdutórios sobre a geração de modelo geoidais. Em seguida mostra o desenvolvimento de uma nova sistematização do tratamento de dados gravimétricos com objetivo de facilitar a detecção de erros, aumentar a produtividade e melhorar a organização de resultados obtidos. Dentro deste desenvolvimento, são revisadas as teorias utilizadas para transformar medições feitas com gravímetros diferenciais em aceleração da gravidade. Apresenta também técnicas de ajustamento de observações com intuito tratar erros aleatórios. A nova abordagem sugerida foi utilizada para o desenvolvimento de um software objetivando validar as idéias propostas, permitir a comparação com outras soluções existentes e também servir como uma contribuição tecnológica. Dados gravimétricos reais foram testados dentro da abordagem proposta tendo sido observados mais organização, ganho de produtividade e principalmente a detecção de erros grosseiros e aleatórios. Com a revisão do cálculo da correção da maré, percebeu-se que programas e equipamentos atualmente em uso não possuem configuração do fator gravimétrico, fato que pode influenciar em até 0; 007mGals no processamento das observações
Abstract: With the use of appropriate methods, GNSS receivers can determine coordinates with sufficient accuracy for use in projects. The ellipsoidal height obtained, however, does not use the same reference system as the one used in transportation engineering. The ellipsoidal height can be transformed to orthometric height using geoid models that are generated from gravimetric data. In this work some introductory concepts on the generation of geoid model are presented. Then it shows the development of a new approach in systematization of gravimetric data processing aiming to facilitate the detection of errors, increase productivity and improve the organization of the results obtained in the gravimetric surveys. Within this development, the theories used to convert measurements of the differences in gravity acceleration are revised. It also features adjustment techniques of observations in order to deal with random errors. The new suggested approach was used to develop software in order to validate the proposed ideas, allow comparison with other existing solutions, and also serves as a technological contribution. Gravimetric data were tested within the suggested approach. It was observed better organization, productivity gains and mainly detection of gross errors and random. With the review of the tide correction calculation, it was realized that programs and equipments now widely used have no gravimetric factor setting, a fact that can influence up to 0; 007mGals in processing the readings
Doutorado
Transportes
Doutor em Engenharia Civil
APA, Harvard, Vancouver, ISO, and other styles
24

Schmalzle, Gina Marie. "The Earthquake Cycle of Strike-Slip Faults." Scholarly Repository, 2008. http://scholarlyrepository.miami.edu/oa_dissertations/177.

Full text
Abstract:
An earthquake is a mechanism of stress release along plate boundaries due to relative motion between the Earth's lithospheric blocks. The period in which stresses are accruing across the plate boundary is known as the interseismic portion of the earthquake cycle. This dissertation focuses on interseismic portion of the earthquake cycle to extract characteristics of fault, shear zone and rock properties. Global Positioning System (GPS) data are used to observe the pattern of deformation across two primarily strike-slip fault systems: the Carrizo Segment of the San Andreas Fault (SAF) and the Eastern California Shear Zone (ECSZ). Two sets of GPS data are processed, analyzed and applied to analytic and numerical models describing the interseismic behavior of the earthquake cycle. The Carrizo segment is mature (i.e., had many earthquakes) and has juxtaposed terrains with varying rock properties laterally across the fault system. Lateral variations in rock properties affect the pattern of deformation around strike-slip faults and affect how surrounding rock deforms and if not considered may bias the interpretation of the faulted system. The Carrizo segment separates Franciscan terrain northeast of the fault from Salinian block to the southwest. GPS data are well fit to a model with a 15-25 km weak zone northeast of the Carrizo segment. The long-term slip rate estimated on the SAF is 34-38 mm/yr, with 2-4 mm/yr accommodated on faults to the west. The viscosity for the combined lower crust/upper mantle is estimated at 2-5x10^19 Pa s. This model is consistent with the distribution of rock type and corresponding laboratory data on their material properties, paleoseismic, seismic and magnetotelluric data. The ECSZ is a young (<10 >Myr) system of strike-slip faults including the Owens Valley - Airport Lake, Panamint Valley - Ash Hill - Hunter Mountain and Death Valley - Furnace Creek fault systems. The ECSZ study concentrates on fault evolution by finding the current position of maximum shear across the shear zone and estimating fault rates. Geologic studies suggest that the Death Valley - Furnace Creek fault system on eastern end of the ECSZ was the primary accommodator of slip early in the ECSZ history. This study suggests that the current locus of shear has shifted westward, and resides in the center of the ECSZ under the Panamint Valley - Ash Hill -Hunter Mountain fault system. The model dependent estimated geodetic rate of the Ash Hill - Panamint Valley -Hunter Mountain fault system (4.91-6.11 mm/yr) is faster than geologic estimates (1.6 - 4 mm/yr). The result is interpreted as a simplification of the ECSZ with time, combined with progressive westward migration of deformation. The best estimate for a combined rate across the shear zone is 10 mm/yr (20% of total Pacific-North America motion). The summation of rates obtained by this study is 49 mm/yr, well within estimates obtained by previous studies using independent techniques.
APA, Harvard, Vancouver, ISO, and other styles
25

Rabin, Mickael. "Caractérisation de la déformation récente dans une chaine orogénique lente : l'arc du Jura. Approches combinées morphotectonique, géodésique et géophysique." Thesis, Besançon, 2016. http://www.theses.fr/2016BESA2008/document.

Full text
Abstract:
L'objectif de cette thèse était de caractériser la déformation récente, tant dans son style que dans son partitionnement, d'un arc orogénique lent à travers une approche pluridisciplinaire à grande échelle.La déformation récente et actuelle de l'arc du Jura a été caractérisée par l'analyse des indices géomorphologiques le long des profils de rivières ainsi qu'à travers le traitement des données sismiques et géodésiques. Les essais de caractérisation et de datation des évènements tectoniques et sismiques à travers l'analyse des failles décrochantes tardives et des enregistrements spéléologiques n'ont pas permis d'apporter de nouvelles données sur la néotectonique du Jura. Cependant la combinaison des données et observations géomorphologiques, géophysiques et géodésiques confrontée aux données des précédentes études nous permets de proposer un modèle de répartition de la déformation dans le système orogénique Alpes occidentales-Jura. [...]
No abstract available
APA, Harvard, Vancouver, ISO, and other styles
26

Rogister, Yves. "Modes normaux de modèles de Terre en rotation." Habilitation à diriger des recherches, Université de Strasbourg, 2012. http://tel.archives-ouvertes.fr/tel-00773648.

Full text
Abstract:
The normal-mode spectrum of rotating Earth models is made up of the seismic modes, the rotational modes and the spectrum of the liquid core. The local equations for the infinitesimal elastic-gravitational deformation, based on a Lagrangian perturbation of a spherically-averaged Earth model using the theory of hydrostatic equilibrium, are first established. A comparison is made between this approach and the classical global angular momentum approach to Earth rotation variations. The splitting of the seismic modes by rotation and ellipticity is then computed. Numerical investigation also shows that, by changing the structure of the liquid core, the rotational modes and core spectrum interact to give rise to avoided crossings, which provide a physically plausible mechanism to explain the observed double frequency of the Chandler wobble. The analogy with other oscillatory physical systems allows for a better understanding of the avoided crossing phenomenon.
APA, Harvard, Vancouver, ISO, and other styles
27

Tavakoli, Farokh. "Déformation actuelle et cinématique des failles actives observées par GPS dans le Zagros et l'Est iranien." Phd thesis, Université Joseph Fourier (Grenoble), 2007. http://tel.archives-ouvertes.fr/tel-00285919.

Full text
Abstract:
La convergence entre l'Arabie et l'Eurasie est accommodée à l'intérieur du territoire iranien. Nous présentons des champs de vitesse GPS denses couvrant une grande partie de l'Iran (Zagros, block de Lut et Kopeh Dagh) avec des précisions meilleures que 2 mm/an.
Dans le Zagros, la convergence est accommodée par du partitionnement dans la partie nord. 2-4 mm/an de décrochement dextre sur la MRF sont transférés sur les failles de Dena, Kazerun et Kareh Bas dans le système de failles de Kazerun, se déplaçant à 3-4 mm/an chacune. Dans le Zagros Central, 8 mm/an de raccourcissement sont concentrés près du Golf Persique, contrastant avec une sismicité plus distribuée et indiquant un découplage de la déformation superficielle du socle.
A l'est de l'Iran, entre le block central Iranien et le block de Hellmand, 14 mm/an de cisaillement dextre orienté NS sont observés au travers du block de Lut, avec 6.5 mm/an absorbés à l'ouest (failles de Bam, Gowk et Sabzevaran) et 7.5 mm/an à l'est (zone de suture de Sistan). Des failles majeures senestres orientées EW au nord du block de Lut accommodent une partie du cisaillement (Dasht-e-Bayaz 1.5 mm/an, Doruneh 2.5 mm/an). Au sud de la chaîne du Kopeh Dagh 8 mm/an de cisaillement persistent, dont 3.5 et 2.5 mm/an sont absorbés par du raccourcissement NS dans le Binalud et l'est Kopeh Dagh, 5 mm/an par du décrochement dextre au travers le système de failles de Quchan, et 5-8 mm/an par l'expulsion du basin Sud Caspien vers l'ouest.
La comparaison des taux de glissement actuels avec des taux géologiques court et long terme montre une évolution complexe des activités des failles même dans le contexte de collision continental récente de l'Iran.
APA, Harvard, Vancouver, ISO, and other styles
28

Lemaux, James Wilmer II. "The motion between Nubia and Somalia from magnetic anomaly and fracture zone crossings flanking the Southwest Indian Ridge." Thesis, 2000. http://hdl.handle.net/1911/17355.

Full text
Abstract:
Previous reconstructions for anomaly 5 and older anomalies flanking the Southwest Indian Ridge (SWIR) have indicated no statistically significant evidence for motion between the Nubian and Somalian plates. Recently, an analysis of current plate motion across the SWIR indicates significantly different Nubia-Antarctica and Somalia-Antarctica angular velocities. Herein the motion across the SWIR is examined since chron 5 (11 Ma) and chron 6 (20 Ma). I identify 238 Anomaly 5 crossings, 140 Anomaly 6 crossings, and many fracture zone crossings. The new results show that the Nubia-Antarctica and Somali a-Antarctica rotations differ significantly. The results have several implications. (1) Earlier motion differs significantly from that since 3.2 Ma, implying that Nubia-Somalia motion began before 3.2 Ma. (2) Poles of rotation for motion since chron 5 and since chron 6 poles differ significantly from those after 3.2 Ma suggesting a component of right-lateral shearing has occurred along the East African rift since 11 and 20 Ma. (3) Data suggest that the boundary between Nubia and Somalia is narrow where it intersects the SWIR near the Andrew Bain fracture zone complex.
APA, Harvard, Vancouver, ISO, and other styles
29

Nolan, Clifford Joseph. "Global analysis of linearized inversion for the acoustic wave equation." Thesis, 1997. http://hdl.handle.net/1911/19192.

Full text
Abstract:
To predict the location of natural resources and reduce the cost of exploration, geophysicists rely on various techniques to map the internal structure of the earth. One common mapping method probes the earth's interior using an acoustic energy source (sound waves). The acoustic waves reflect when they impinge on a location where the acoustic velocity field oscillates rapidly (on the scale of a wavelength). When the waves reflect back to the surface, they carry kinematical information about the location of the oscillatory velocity field. A linearized wave equation models the scattering process and its solution operator is a Fourier integral operator. As such, the scattering operator has a canonical relation $\Lambda$ which describes how the operator maps oscillatory velocity fields to oscillatory wave fields at the surface. The goal of linearized inversion is to obtain an inverse operator (with inverse canonical relation) for the scattering operator. We give a geometrical condition on $\Lambda$ that is equivalent to the existence of a linearized inversion operator. Since the $L\sp2$-adjoint of the scattering operator has inverse canonical relation, geophysicists often apply it to the scattered field to obtain a map of the subsurface. I analyze the scattering operator using high-frequency asymptotics and show that if the geometrical condition fails, the scattering canonical relation is not injective. Therefore, application of the adjoint operator to the scattered wave field can produce artifacts in the resulting map of the subsurface. I demonstrate this effect numerically. I also prove that the scattering operator is continuous between a certain domain and range space iff the geometrical condition on $\Lambda$ holds. Furthermore, I have shown that it is possible to map an experiment where the geometrical condition fails into another experiment where it holds.
APA, Harvard, Vancouver, ISO, and other styles
30

Hippchen, Sabine. "Slip partitioning, crustal tectonics and deformation of the Queen Charlotte margin and northern Vancouver Island." Thesis, 2011. http://hdl.handle.net/1828/3579.

Full text
Abstract:
Part I of this thesis investigates current deformation in western British Columbia from northern Vancouver Island in the south to Haida Gwaii in the north. The area is characterized by transition from the Cascadia subduction zone to the Queen Charlotte transform fault. The tectonic setting involves interactions between the Pacific, North America, Juan de Fuca, and Explorer plates, and the Winona block, involving a number of plate boundaries: the mainly strike-slip Queen Charlotte, Revere-Dellwood-Wilson and Nootka faults, the Explorer ridge, and the Cascadia subduction zone. Using GPS campaign data from 1993 to 2008 I derive a new crustal velocity field for Northern Vancouver Island and the adjacent mainland, and integrate it with previous velocity fields developed for Haida Gwaii, southern Vancouver Island and the adjacent mainland. The northern limit of the subduction zone is confirmed to be at Brooks Peninsula, where the direction of the crustal motion changes abruptly from ENE to NNE. I use viscoelastic models to explore what percentage of the observed deformation is transient, related to the earthquake cycle, and how much is permanent ongoing deformation, distributed off the continental margin. Previous authors have developed two competing end-member models that can each explain how the Pacific/North America plate convergence is accommodated off Haida Gwaii. These models assume either internal crustal shortening or underthrusting of the Pacific plate. These new GPS data allow me to conclude that underthrusting does occur, and that a small component (<15%) of the observed data reflects long-term deformation. South of Haida Gwaii the distinction between transient and long-term deformation is not as clear; however, I conclude that transient deformation alone cannot fully explain the observed velocities, and so long-term deformation likely must also occur. Part II of the thesis investigates the updip and downdip limits of the seismogenic zone of the Sumatra megathrust fault. Temperature and downdip changes in formation composition are controls proposed for these limits. To examine the thermal control I developed 2-D finite element models of the Sumatra subduction zone with smoothly varying subduction dip, variable thermal properties of the rock units, frictional heating along the rupture plane, and an appropriate thermal state for the incoming plate. The common updip thermal limit for seismic behaviour of 100-150°C occurs close to or at the trench in agreement with the rupture limit of the 2004 earthquake. Off central Sumatra the common downdip thermal limit range of 350-450°C occurs at 30-60 km depth. The 350°C isotherm location is in agreement with the earthquake limits but 450°C is deeper. North of Sumatra, 350°C occurs ~14 km deeper than the earthquake rupture limit. The proposed composition control for the downdip limit, the intersection of the subduction thrust with the forearc mantle, is at a depth of ~30 km, 140-200 km from the trench, in good agreement with the earthquake limits. These results support the conclusion that the Sumatra updip seismogenic limit is thermally controlled, but the downdip limit is governed by the intersection of the downgoing plate with the forearc Moho.
Graduate
APA, Harvard, Vancouver, ISO, and other styles
31

(8817314), Grant Bonnette. "Characterizing Deformation Along an Early-Stage Rift: GPS Observations from the Northern Lake Malawi (Nyasa) Rift." Thesis, 2020.

Find full text
Abstract:
The Malawi (Nyasa) Rift is a prominent example of immature rifting located along the southern East African Rift System. The SEGMeNT (Study of Extension and maGmatism in Malawi aNd Tanzania) project installed a new network of 12 continuous GPS sites in Malawi, Tanzania, and Zambia. Using this new data along with data from other existing sites in the region, I examine the present-day deformation along the Malawi Rift and surrounding areas. The GPS data is used to constrain a tectonic block model of the Malawi Rift in order to produce estimates of angular velocities of the blocks, which are then used to derive fault slip rates and linear block velocities. The new data around the Malawi Rift suggests an additional block may be required to explain the observed deformation. My preferred model predicts that extension rates in the area are slower than previous studies suggested (3.8 ± 0.7 mm/yr; Stamps et al., 2008) with a cumulative rate 2.35 ± 0.65 mm/yr in the northern Malawi Rift and 1.26 ± 0.85 mm/yr along the southern Malawi Rift.
APA, Harvard, Vancouver, ISO, and other styles
32

"Constraining Source Models, Underlying Mechanisms, and Hazards Associated with Slow Slip Events: Insight from Space-Borne Geodesy and Seismology." Doctoral diss., 2018. http://hdl.handle.net/2286/R.I.51612.

Full text
Abstract:
abstract: The movement between tectonic plates is accommodated through brittle (elastic) displacement on the plate boundary faults and ductile permanent deformation on the fault borderland. The elastic displacement along the fault can occur in the form of either large seismic events or aseismic slip, known as fault creep. Fault creep mainly occurs at the deep ductile portion of the crust, where the temperature is high. Nonetheless, aseismic creep can also occur on the shallow brittle portion of the fault segments that are characterized by frictionally weak material, elevated pore fluid pressure, or geometrical complexity. Creeping segments are assumed to safely release the accumulated strain(Kodaira et al., 2004; Rice, 1992)(Kodaira et al., 2004; Rice, 1992)(Kodaira et al., 2004; Rice, 1992)(Kodaira et al., 2004; Rice, 1992)(Kodaira et al., 2004; Rice, 1992) on the fault and also impede propagation of the seismic rupture. The rate of aseismic slip on creeping faults, however, might not be steady in time and instead consist of successive periods of acceleration and deceleration, known as slow slip events (SSEs). SSEs, which aseismically release the strain energy over a period of days to months, rather than the seconds to minutes characteristic of a typical earthquake, have been interpreted as earthquake precursors and as possible triggering factor for major earthquakes. Therefore, understanding the partitioning of seismic and aseismic fault slip and evolution of creep is fundamental to constraining the fault earthquake potential and improving operational seismic hazard models. Thanks to advances in tectonic geodesy, it is now possible to detect the fault movement in high spatiotemporal resolution and develop kinematic models of the creep evolution on the fault to determine the budget of seismic and aseismic slip. In this dissertation, I measure the decades-long time evolution of fault-related crustal deformation along the San Andrea Fault in California and the northeast Japan subduction zone using space-borne geodetic techniques, such as Global Positioning System (GPS) and Interferometric Synthetic Aperture Radar (InSAR). The surface observation of deformation combined with seismic data set allow constraining the time series of creep distribution on the fault surface at seismogenic depth. The obtained time-dependent kinematic models reveal that creep in both study areas evolves through a series of SSEs, each lasting for several months. Using physics-based models informed by laboratory experiments, I show that the transient elevation of pore fluid pressure is the driving mechanism of SSEs. I further investigate the link between SSEs and evolution of seismicity on neighboring locked segments, which has implications for seismic hazard models and also provides insights into the pattern of microstructure on the fault surface. I conclude that while creeping segments act as seismic rupture barriers, SSEs on these zones might promote seismicity on adjacent seismogenic segments, thus change the short-term earthquake forecast.
Dissertation/Thesis
Doctoral Dissertation Geological Sciences 2018
APA, Harvard, Vancouver, ISO, and other styles
33

"Remote Sensing and Modeling of Stressed Aquifer Systems and the Associated Hazards." Doctoral diss., 2018. http://hdl.handle.net/2286/R.I.50435.

Full text
Abstract:
abstract: Aquifers host the largest accessible freshwater resource in the world. However, groundwater reserves are declining in many places. Often coincident with drought, high extraction rates and inadequate replenishment result in groundwater overdraft and permanent land subsidence. Land subsidence is the cause of aquifer storage capacity reduction, altered topographic gradients which can exacerbate floods, and differential displacement that can lead to earth fissures and infrastructure damage. Improving understanding of the sources and mechanisms driving aquifer deformation is important for resource management planning and hazard mitigation. Poroelastic theory describes the coupling of differential stress, strain, and pore pressure, which are modulated by material properties. To model these relationships, displacement time series are estimated via satellite interferometry and hydraulic head levels from observation wells provide an in-situ dataset. In combination, the deconstruction and isolation of selected time-frequency components allow for estimating aquifer parameters, including the elastic and inelastic storage coefficients, compaction time constants, and vertical hydraulic conductivity. Together these parameters describe the storage response of an aquifer system to changes in hydraulic head and surface elevation. Understanding aquifer parameters is useful for the ongoing management of groundwater resources. Case studies in Phoenix and Tucson, Arizona, focus on land subsidence from groundwater withdrawal as well as distinct responses to artificial recharge efforts. In Christchurch, New Zealand, possible changes to aquifer properties due to earthquakes are investigated. In Houston, Texas, flood severity during Hurricane Harvey is linked to subsidence, which modifies base flood elevations and topographic gradients.
Dissertation/Thesis
Doctoral Dissertation Geological Sciences 2018
APA, Harvard, Vancouver, ISO, and other styles
34

Gowan, Evan James. "Glacio-isostatic adjustment modelling of improved relative sea-level observations in southwestern British Columbia, Canada." Thesis, 2007. http://hdl.handle.net/1828/263.

Full text
Abstract:
In the late Pleistocene, most of British Columbia and northern Washington was covered by the Cordilleran ice sheet. The weight of the ice sheet caused up to several hundred metres of depression of the Earth’s crust. This caused relative sea level to be higher in southwestern British Columbia despite lower global eustatic sea level. After deglaciation, postglacial rebound of the crust caused sea level to quickly drop to below present levels. The rate of sea-level fall is used here to determine the rheology of the mantle in southwestern British Columbia. The first section of this study deals with determination of the postglacial sea-level history in the Victoria area. Constraints on sea-level position come from isolation basin cores collected in 2000 and 2001, as well as from previously published data from the past 45 years. The position of sea-level is well constrained at elevations greater than -4 m, and there are only loose constraints below that. The highstand position in the Victoria area is between 75-80 m. Sea level fell rapidly from the highstand position to below 0 m between 14.3 and 13.2 thousand calendar years before present (cal kyr BP). The magnitude of the lowstand position was between -11 and -40 m. Though there are few constraints on the lowstand position, analysis of the crustal response favours larger lowstand. Well constrained sea-level histories from Victoria, central Strait of Georgia and northern Strait of Georgia are used to model the rheology of the mantle in southwestern British Columbia. A new ice sheet model for the southwestern Cordillera was developed as older models systematically underpredicted the magnitude of sea level in late glacial times. Radiocarbon dates are compiled to provide constraints on ice sheet advance and retreat. The Cordillera ice sheet reached maximum extent between 17 and 15.4 cal kyr BP. After 15.4 cal kyr, the ice sheet retreated, and by 13.7 cal kyr BP Puget Sound, Juan de Fuca Strait and Strait of Georgia were ice free. By 10.7 cal kyr BP, ice was restricted to mountain glaciers at levels similar to present. With the new ice model, and using an Earth model with a 60 km lithosphere, asthenosphere with variable viscosity and thickness, and transitional and lower mantle viscosity based on the VM2 Earth model, predicted sea level matches the observed sea level constraints in southwestern British Columbia. Nearly identical predicted sea-level curves are found using asthenosphere thicknesses between 140-380 km with viscosity values between 3x10^18 and 4x10^19 Pa s. Predicted sea level is almost completely insensitive to the mantle below the asthenosphere. Modeled present day postglacial uplift rates are less than 0.5 mm yr^-1. Despite the tight fit of the predicted sea level to observed late-glacial sea level observations, the modelling was not able to fit the early Holocene rise of sea level to present levels in the central and northern Strait of Georgia.
APA, Harvard, Vancouver, ISO, and other styles
35

Ochman, Marcin. "Polski korpus inżynierów wojskowych w latach 1807-1831." Doctoral thesis, 2017.

Find full text
Abstract:
W połowie XVIII w. rozpoczął się proces modernizacji wojsk Rzeczpospolitej. Sformowane zostały pierwsze oddziały inżynieryjne i Korpus Inżynierów, a w 1765 r. powstała Szkoła Rycerska – uczelnia wojskowa kształcąca inżynierów wojskowych. Wojska inżynieryjne odrodziły się w okresie napoleońskim, w powstałej wówczas armii Księstwa Warszawskiego. Wojska te były zorganizowane na wzór francuski i cały czas rozbudowywane. Największą liczebność osiągnęły przed kampanią rosyjską w 1812 r. W tym okresie Korpus Inżynierów realizował wiele prac na zlecenie Napoleona, m. in. budował twierdzę w Modlinie i prowadził szczegółowe prace kartograficzne. W 1809 r. powołano Szkołę Aplikacyjnę Artylerii i Inżynierów wzorowaną na paryskiej École polytechnique. Jej uczniami było wielu wybitnych inżynierów jak gen. I. Prądzyński i F. Pancer.W okresie 1815-1830 r. Królestwo Polskie było zależne od Rosji, co spowodowało, że jego armia była wzorowana była na rosyjskiej. Powołanie w tym czasie do życia Kwatermistrzostwa Generalnego sprawiło, że przejęło ono wiele obowiązków i najzdolniejszych oficerów Korpusu Inżynierów.Podczas Powstania (1830-31) wojska inżynieryjne odegrały znaczną rolę, budując wiele mostów polowych i fortyfikacji. Najtrudniejszym zadaniem było w tym czasie ufortyfikowanie Warszawy, niestety nie udało się tego skutecznie wykonać. Po upadku Powstania i likwidacji armii w tym również wojsk inżynieryjnych, wielu żołnierzy i oficerów udało się na emigrację ale większość pozostała w Kraju stanowiąc zaczątek polskiej inteligencji technicznej.
In mid-1700s, the armed forces of the Polish-Lithuanian Commonwealth entered a process of modernisation. The first engineering units and the Corps of Engineers were organised and the year 1765 marked the establishment of the School of Chivalry - a military university training military engineers. The engineering corps was recreated with the formation of the army of the Duchy of Warsaw during the Napoleonic era. The Corps was organised based on the French model and continually developed, reaching its highest numbers in 1812. During that time, the Corps of Engineers carried out a number of projects commissioned by Napoleon, such as detailed mapping or the construction of the Modlin fortress. The Artillery and Engineering School, established in 1809 and designed after the French École polytechnique in Paris, trained many prominent engineers, such as General Ignacy Prądzyński and Feliks Pancer.During the era of the Russian-dominated Congress Kingdom of Poland (1815-1830), the Polish armed forces followed the organisation of the Russian Army. The General Logistics Department set up during that time, took over many of the responsibilities and most talented officers from the Corps of Engineers.The engineering corps played a key role in the November Uprising of 1830, constructing a number of field bridges and fortifications. Unfortunately, the most difficult task at the time, the fortification of Warsaw, was never completed. After the fall of the Uprising and the disbandment of the army, including the engineering corps, many soldiers and officers went into exile; still most remained in the Country and those who did became the nucleus of the Polish technology intelligentsia.
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography