Relevant bibliographies by topics / Design Domains

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Design Domains'

Author: Grafiati
Published: 4 June 2021
Last updated: 10 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Design Domains.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Design Domains"

1

ACITO, Bill. "“A Cross-Domain, System Planning Methodology”." International Symposium on Microelectronics 2018, no. 1 (October 1, 2018): 000005–12. http://dx.doi.org/10.4071/2380-4505-2018.1.000005.

Full text
Abstract:
Abstract Through several decades of electronic product design, three high-level design domains have emerged; IC (SoC) design, package (SiP) design and board (PCB/PWB) design. These three domains are separated and somewhat isolated, based on the EDA tools they use and by domain expertise. In many cases, the design tools come from 2 or 3 different EDA companies, leading to limited or no methods of sharing design data across the three domains. This typically leads to an “over-the-wall” design approach, resulting in downstream layout complexities for the package and board design teams, requiring domain expertise (human in the loop) in these design domains. Typically, this high-level of complexity occurs because the package substrate and board form-factor are not planned and optimized in context of the IC(s). Thus, the automation of these layouts becomes nearly impossible and tremendous human interaction (domain expertise) is the only way to complete the designs cost-effectively. Moreover, this methodology directly impacts time-to-market and results in products that do not live up to cost or performance expectations.
APA, Harvard, Vancouver, ISO, and other styles
2

Beirão, José, and José P. Duarte. "Generic grammars for design domains." Artificial Intelligence for Engineering Design, Analysis and Manufacturing 32, no. 2 (May 2018): 225–39. http://dx.doi.org/10.1017/s0890060417000452.

Full text
Abstract:
AbstractShape grammars have been developed to codify a specific type of artifact – Queen Anne houses, Buffalo bungalows – or the style of a particular designer – Andrea Palladio, Frank Lloyd Wright, or Álvaro Siza Vieira. However, these specific grammars fail to encode recurrent design moves or features that are above the particularities of a specific design style or the idiosyncrasies of a specific designer and, therefore, are common to a larger category of designs and maybe reutilized and incorporated in the definition of new, specific design languages. To overcome these limitations, the notion of generic grammars for defining design domains is introduced. Its application to the urban design domain is illustrated by showing a generic grammar implementation resulting in a City Information Modeling platform composed of a parametric design interface connected to a geographic database.
APA, Harvard, Vancouver, ISO, and other styles
3

Qian, Lena, and John S. Gero. "Function–behavior–structure paths and their role in analogy-based design." Artificial Intelligence for Engineering Design, Analysis and Manufacturing 10, no. 4 (September 1996): 289–312. http://dx.doi.org/10.1017/s0890060400001633.

Full text
Abstract:
AbstractIn many creative design processes, cross-domain knowledge is required to inspire the new design result. Thus, in knowledge-based design, how we represent the cross-domain knowledge becomes a key issue. In this paper, we present a formalism for design knowledge representation. By analyzing function representation in different design domains, from graphic design and industrial design to architectural and engineering device designs, we find that although the focus of each kind of design is different, the function representation can be generalized into a small number of categories. This formalism can be used in an explorative model of design by analogy, where designs from different design domains are sources to help produce a new design.
APA, Harvard, Vancouver, ISO, and other styles
4

Bhatta, Sambasiva R., and Ashok K. Goel. "From design experiences to generic mechanisms: Model-based learning in analogical design." Artificial Intelligence for Engineering Design, Analysis and Manufacturing 10, no. 2 (April 1996): 131–36. http://dx.doi.org/10.1017/s0890060400001372.

Full text
Abstract:
AbstractAnalogical reasoning plays an important role in design. In particular, cross-domain analogies appear to be important in innovative and creative design. However, making cross-domain analogies is hard and often requires abstractions common to the source and target domains. Recent work in case-based design suggests that generic mechanisms are one type of abstractions useful in adapting past designs. However, one important yet unexplored issue is where these generic mechanisms come from. We hypothesize that they are acquired incrementally from design experiences in familiar domains by abstraction over patterns of regularity. Three important issues in abstraction from experiences are what to abstract from an experience, how far to abstract, and what methods to use. In this short paper, we describe how structure-behavior-function models of designs in a familiar domain provide the content, and together with the problem-solving context in which learning occurs, also provide the constraints for learning generic mechanisms from design experiences. In particular, we describe the model-based learning method with a scenario of learning feedback mechanism.
APA, Harvard, Vancouver, ISO, and other styles
5

Velivela, Pavan Tejaswi, Nikita Letov, Yuan Liu, and Yaoyao Fiona Zhao. "APPLICATION OF DOMAIN INTEGRATED DESIGN METHODOLOGY FOR BIO-INSPIRED DESIGN- A CASE STUDY OF SUTURE PIN DESIGN." Proceedings of the Design Society 1 (July 27, 2021): 487–96. http://dx.doi.org/10.1017/pds.2021.49.

Full text
Abstract:
AbstractThis paper investigates the design and development of bio-inspired suture pins that would reduce the insertion force and thereby reducing the pain in the patients. Inspired by kingfisher's beak and porcupine quills, the conceptual design of the suture pin is developed by using a unique ideation methodology that is proposed in this research. The methodology is named as Domain Integrated Design, which involves in classifying bio-inspired structures into various domains. There is little work done on such bio-inspired multifunctional aspect. In this research we have categorized the vast biological functionalities into domains namely, cellular structures, shapes, cross-sections, and surfaces. Multi-functional bio-inspired structures are designed by combining different domains. In this research, the hypothesis is verified by simulating the total deformation of tissue and the needle at the moment of puncture. The results show that the bio-inspired suture pin has a low deformation on the tissue at higher velocities at the puncture point and low deformation in its own structure when an axial force (reaction force) is applied to its tip. This makes the design stiff and thus require less force of insertion.
APA, Harvard, Vancouver, ISO, and other styles
6

Beju, Livia Dana, Paul Dan Brîndaşu, and Gabriel Vasile Oniţă. "A Conceptual Model of Product Design." Applied Mechanics and Materials 371 (August 2013): 908–12. http://dx.doi.org/10.4028/www.scientific.net/amm.371.908.

Full text
Abstract:
The paper presents a conceptual model that pursues the understanding of the activities, the phases and the mechanisms of product design. The purpose of this model is to aid the product conception phase, as well as to develop software products that can furthermore aid design. The model takes into account the entire mental potential of the human being. The paper uses Jung's model in order to describe the various aspects of the human psyche. The paper presents a number of design models from the scientific literature. The proposed model defines domains of the needs imposed by stakeholders and specialists, functions domains and product domains. It explains the mechanism through which information is passed from one domain to another. As the information travels between domains, it undergoes a series of modelling and objectivation processes. The model is explained in better detail for the first phase of product design; however, it is applicable in all phases of product lifecycle. In the space and time coordinates used by the model, the conception appears as a spiral.
APA, Harvard, Vancouver, ISO, and other styles
7

Chatterji, Shurojit, and Huaxia Zeng. "Random mechanism design on multidimensional domains." Journal of Economic Theory 182 (July 2019): 25–105. http://dx.doi.org/10.1016/j.jet.2019.04.003.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Hsu, Chia-Hsin, Chien-Kuo Chen, and Ming-Jing Hwang. "The architectural design of networks of protein domain architectures." Biology Letters 9, no. 4 (August 23, 2013): 20130268. http://dx.doi.org/10.1098/rsbl.2013.0268.

Full text
Abstract:
Protein domain architectures (PDAs), in which single domains are linked to form multiple-domain proteins, are a major molecular form used by evolution for the diversification of protein functions. However, the design principles of PDAs remain largely uninvestigated. In this study, we constructed networks to connect domain architectures that had grown out from the same single domain for every single domain in the Pfam-A database and found that there are three main distinctive types of these networks, which suggests that evolution can exploit PDAs in three different ways. Further analysis showed that these three different types of PDA networks are each adopted by different types of protein domains, although many networks exhibit the characteristics of more than one of the three types. Our results shed light on nature's blueprint for protein architecture and provide a framework for understanding architectural design from a network perspective.
APA, Harvard, Vancouver, ISO, and other styles
9

Cropley, David H., and James C. Kaufman. "The siren song of aesthetics? Domain differences and creativity in engineering and design." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 233, no. 2 (May 31, 2018): 451–64. http://dx.doi.org/10.1177/0954406218778311.

Full text
Abstract:
For many years, researchers have debated the role of “domain” in creativity. Opinion remains divided, but a common view is that creativity is a combination of domain-general elements, coupled with domain-specific manifestations, usually in the form of different kinds of products. Discussions of domains and creativity frequently take place in very broad, thematic terms, differentiating only between Arts and Sciences, with less attention given to differences within domains. The goal of this paper is to explore a single technological domain, studying differences between the micro-domains of Engineering and Industrial Design. Do engineers and industrial designers differ when evaluating the creativity of products? If they differ, what might be the underlying drivers of these differences? Contrary to expectations, not only were there significant differences between these groups, but evidence presented in this study suggests that engineers have difficulty differentiating between aesthetics and functionality, as components of product creativity, in contrast to industrial designers, who seem to possess a more discriminating eye.
APA, Harvard, Vancouver, ISO, and other styles
10

Khadilkar, P. R., and P. Cash. "DISCERNING BEHAVIOURAL DESIGN: A CONCEPTUAL MODEL." Proceedings of the Design Society: DESIGN Conference 1 (May 2020): 1455–64. http://dx.doi.org/10.1017/dsd.2020.167.

Full text
Abstract:
AbstractBehavioural design has emerged as an important domain of design practice and research due to its ability to deliver the desired outcomes beyond technical designs. Research on behavioural design is not successful in discerning it from other design domains, which is important for theory building. This paper discerns the unique characters of behavioural design by tracing the emergence of behaviour in design. Twelve interviews from six behaviour design cases belonging to four firms has been used to further discern the unique characteristics resulting into the conceptual model of behavioural design
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Design Domains"

1

Paik, Sangwook. "Multi-objective optimal design of steel trusses in unstructured design domains." Thesis, Texas A&M University, 2005. http://hdl.handle.net/1969.1/3124.

Full text
Abstract:
Researchers have applied genetic algorithms (GAs) and other heuristic optimization methods to perform truss optimization in recent years. Although a substantial amount of research has been performed on the optimization of truss member sizes, nodal coordinates, and member connections, research that seeks to simultaneously optimize the topology, geometry, and member sizes of trusses is still uncommon. In addition, most of the previous research is focused on the problem domains that are limited to a structured domain, which is defined by a fixed number of nodes, members, load locations, and load magnitudes. The objective of this research is to develop a computational method that can design efficient roof truss systems. This method provides an engineer with a set of near-optimal trusses for a specific unstructured problem domain. The unstructured domain only prescribes the magnitude of loading and the support locations. No other structural information concerning the number or locations of nodes and the connectivity of members is defined. An implicit redundant representation (IRR) GA (Raich 1999) is used in this research to evolve a diverse set of near-optimal truss designs within the specified domain that have varying topology, geometry, and sizes. IRR GA allows a Pareto-optimal set to be identified within a single trial. These truss designs reflect the tradeoffs that occur between the multiple objectives optimized. Finally, the obtained Pareto-optimal curve will be used to provide design engineers with a range of highly fit conceptual designs from which they can select their final design. The quality of the designs obtained by the proposed multi-objective IRR GA method will be evaluated by comparing the trusses evolved with trusses that were optimized using local perturbation methods and by trusses designed by engineers using a trial and error approach. The results presented show that the method developed is very effective in simultaneously optimizing the topology, geometry, and size of trusses for multiple objectives.
APA, Harvard, Vancouver, ISO, and other styles
2

Anderson, Janet E. "Sonification design for complex work domains : streams, mappings and attention /." [St. Lucia, Qld.], 2004. http://www.library.uq.edu.au/pdfserve.php?image=thesisabs/absthe18173.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Zhang, Yanyan. "Investigation of SH2 Domains: Ligand Binding, Structure and Inhibitor Design." The Ohio State University, 2009. http://rave.ohiolink.edu/etdc/view?acc_num=osu1259766230.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Nicholas, Paul, and not supplied. "Approaches to Interdependency: early design exploration across architectural and engineering domains." RMIT University. Architecture and Design, 2008. http://adt.lib.rmit.edu.au/adt/public/adt-VIT20081204.151243.

Full text
Abstract:
While 3D digital design tools have extended the reach of architectural and engineering designers within their own domains, restrictions on the use of the tools and an approach to practice whereby the architect designs (synthesises) and the engineer solves (analyses) - in that order ¡V have limited the opportunities for interdependent modes of interaction between the two disciplines during the early design phase. While it is suggested that 3D digital design tools can facilitate a more integrated approach to design exploration, this idea remains largely untested in practice. The central proposition of my research is that that 3D digital tools can enable interdependencies between crucial aspects of architectural and engineering design exploration during the early design phase which, before the entry of the computer, were otherwise impossible to affect. I define interdependency as a productive form of practice enabled by mutual and lateral dependence. Interdependent parties use problem solving processes that meet not only their own respective goals, but also those of others, by constructively engaging difference across their boundaries to actively search for solutions that go beyond the limits of singular domains. Developed through practice-based project work undertaken during my 3 year postgraduate internship within the Melbourne Australia office of the engineering firm Arup, my research explores new and improved linkages between early design exploration, analysis and making. The principal contribution of my research is to explore this problem from within the context, conditi ons and pressures of live practice. To test the research proposition this dissertation engages firstly with available literature from the fields of organisation theory and design, secondly with information gathered from experts in the field principally via interview, and lastly with processes of testing through practice-based (as opposed to university-based) project work. The dissertation is organized as follows: The Introductory Chapter outlines the central hypothesis, the current state of the discourse, and my motivations for conducting this research. I summarise the structure of my research, and the opportunities and limitations that have framed its ambitions. Chapter Two, Approach to Research and Method, details the constraints and possibilities of the Embedded Research within Architectural Practice context, within which this work has been undertaken, and describes the Melbourne office of Arup, the practice with whom I have been embedded. These contexts have led to the selection of a particular set of ethnographic research instruments, being the use of semi-structured interviews and the undertaking of practice-based studies as a participant-observer. These modes of testing are explained, and the constraints, limitations and requirements associated with them described. Within Chapter Three, Factors for Separation and Integration in Architectural and Engineering Design, I examine selected design literature to detail several factors impacting upon the historic and contemporary relationship between architects and engineers, and to introduce the problem towards which this thesis is addressed. I describe a process of specialisation that has led architects and engineers to see different aspects of a common problem, detail the historical factors for separation, the current relationship between domains and the emerging idea of increased integration during the early design phase. The aim of this section is primarily contextual - to introduce the characters and to understand why their interaction can be difficult - and investigation occurs through the concepts of specialisation and disciplinary roles. Chapter Four, Unravelling Interdependency, establishes an understanding of interdependency through the concept of collaboration. While I differentiate interdependency from collaboration because of the inconsistent manner in which the latter term is employed, the concept of collaboration is useful to initialise my understanding of interdependency because it, as opposed to the closely linked processes of cooperation and coordination, is recognised as being characterised by interdependency, and in fact is a viewed as a response specific to wider conditions of interdependency. From the literature, I identify four sites of intersection crucial to an understanding of interdependency; these are differing perceptions, shared and creative problem solving, communication and trust. These themes, which correlate with my practice experience at Arup Melbourne, are developed to introduce the concepts and vocabulary underlying my research. Chapter Five, Intersections & Interdependency between Architects and Engineers, grounds these four sites of intersection within contemporary issues of digital architectural and engineering practice. Each site is developed firstly through reference to design literature and secondly through the experiences and understandings of senior Arup practitioners as captured through my interviews. The views and experiences of these practitioners are used to locate digital limits to, and potential solutions for, interdependent design exploration between architects and engineers as they are experienced within and by practice. Through this combination of design literature and grounded experience, I extend: * the understanding of differing perceptions through reference to problems associated with digital information transfer. * the understanding of joint and creative problem solving by connecting it to the notion of performance-based design. * the understanding of communication by focussing it upon the idea of back propagating design information. * the understanding of trust by connecting it to the management and reduction of perceived complexity and risk. Chapter Six, Testing through Projects, details the project studies undertaken within this research. These studies are grouped into three discourses, characterized as Design(Arch)Design(Eng), Design|Analysis and Design|Making. As suggested by the concurrency operator that separates the two terms that constitute each of the three labels, each discourse tests how architectural and engineering explorations might execute in parallel. The section Design(Arch)|Design(Eng) reports projects that use a common language of geometry to link architectural and engineering design ideas through geometric interpretation. The section Design|Analysis reports projects in which analytical tools have been used generatively to actively guide and synthesise design exploration. The final section, Design|Making, reports projects in which the architectural and engineering design processes are synthesised around the procurement of fabrication information. Conclusions are then drawn and discussed in Chapter Seven. In evaluating the research I discuss how 3D digital design tools have enabled alternative approaches that resolve issues associated with differing perceptions, establishing common meanings, communication and trust. I summarise how these approaches have enabled increased interdependency in architect engineer interaction. Lastly, I draw together the impacts of intersecting 3D digital aspects of architectural and engineering design exploration during the early design phase, and indicate those aspects that require further analysis and research.
APA, Harvard, Vancouver, ISO, and other styles
5

Goodale, Benjamin. "Crossfit design maximizing building potential across broad time and modal domains /." Amherst, Mass. : University of Massachusetts Amherst, 2009. http://scholarworks.umass.edu/theses/304/.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Walker, James D. "Design of vehicle routing problem domains for a hyper-heuristic framework." Thesis, University of Nottingham, 2015. http://eprints.nottingham.ac.uk/30596/.

Full text
Abstract:
The branch of algorithms that uses adaptive methods to select or tune heuristics, known as hyper-heuristics, is one that has seen a large amount of interest and development in recent years. With an aim to develop techniques that can deliver results on multiple problem domains and multiple instances, this work is getting ever closer to mirroring the complex situations that arise in the corporate world. However, the capability of a hyper-heuristic is closely tied to the representation of the problem it is trying to solve and the tools that are available to do so. This thesis considers the design of such problem domains for hyper-heuristics. In particular, this work proposes that through the provision of high-quality data and tools to a hyper-heuristic, improved results can be achieved. A definition is given which describes the components of a problem domain for hyper-heuristics. Building on this definition, a domain for the Vehicle Routing Problem with Time Windows is presented. Through this domain, examples are given of how a hyper- heuristic can be provided extra information with which to make intelligent search decisions. One of these pieces of information is a measure of distance between solution which, when used to aid selection of mutation heuristics, is shown to improve results of an Iterative Local Search hyper-heuristic. A further example of the advantages of providing extra information is given in the form of the provision of a set of tools for the Vehicle Routing Problem domain to promote and measure ’fairness’ between routes. By offering these extra features at a domain level, it is shown how a hyper-heuristic can drive toward a fairer solution while maintaining a high level of performance.
APA, Harvard, Vancouver, ISO, and other styles
7

Alshaikh, Mohammed Saleh Abdullah. "Design of variation-tolerant synchronizers for multiple clock and voltage domains." Thesis, University of Newcastle upon Tyne, 2014. http://hdl.handle.net/10443/2482.

Full text
Abstract:
Parametric variability increasingly affects the performance of electronic circuits as the fabrication technology has reached the level of 32nm and beyond. These parameters may include transistor Process parameters (such as threshold voltage), supply Voltage and Temperature (PVT), all of which could have a significant impact on the speed and power consumption of the circuit, particularly if the variations exceed the design margins. As systems are designed with more asynchronous protocols, there is a need for highly robust synchronizers and arbiters. These components are often used as interfaces between communication links of different timing domains as well as sampling devices for asynchronous inputs coming from external components. These applications have created a need for new robust designs of synchronizers and arbiters that can tolerate process, voltage and temperature variations. The aim of this study was to investigate how synchronizers and arbiters should be designed to tolerate parametric variations. All investigations focused mainly on circuit-level and transistor level designs and were modeled and simulated in the UMC90nm CMOS technology process. Analog simulations were used to measure timing parameters and power consumption along with a “Monte Carlo” statistical analysis to account for process variations. Two main components of synchronizers and arbiters were primarily investigated: flip-flop and mutual-exclusion element (MUTEX). Both components can violate the input timing conditions, setup and hold window times, which could cause metastability inside their bistable elements and possibly end in failures. The mean-time between failures is an important reliability feature of any synchronizer delay through the synchronizer. The MUTEX study focused on the classical circuit, in addition to a number of tolerance, based on increasing internal gain by adding current sources, reducing the capacitive loading, boosting the transconductance of the latch, compensating the existing Miller capacitance, and adding asymmetry to maneuver the metastable point. The results showed that some circuits had little or almost no improvements, while five techniques showed significant improvements by reducing τ and maintaining high tolerance. Three design approaches are proposed to provide variation-tolerant synchronizers. wagging synchronizer proposed to First, the is significantly increase reliability over that of the conventional two flip-flop synchronizer. The robustness of the wagging technique can be enhanced by using robust τ latches or adding one more cycle of synchronization. The second approach is the Metastability Auto-Detection and Correction (MADAC) latch which relies on swiftly detecting a metastable event and correcting it by enforcing the previously stored logic value. This technique significantly reduces the resolution time down from uncertain synchronization technique is proposed to transfer signals between Multiple- Voltage Multiple-Clock Domains (MVD/MCD) that do not require conventional level-shifters between the domains or multiple power supplies within each domain. This interface circuit uses a synchronous set and feedback reset protocol which provides level-shifting and synchronization of all signals between the domains, from a wide range of voltage-supplies and clock frequencies. Overall, synchronizer circuits can tolerate variations to a greater extent by employing the wagging technique or using a MADAC latch, while MUTEX tolerance can suffice with small circuit modifications. Communication between MVD/MCD can be achieved by an asynchronous handshake without a need for adding level-shifters.
APA, Harvard, Vancouver, ISO, and other styles
8

Azzam, Said Rabah. "Developing a compositional ontology alignment framework for unifying business and engineering domains." Thesis, University of Portsmouth, 2012. https://researchportal.port.ac.uk/portal/en/theses/developing-a-compositional-ontology-alignment-framework-for-unifying-business-and-engineering-domains(858b71bb-7570-4c07-a3e6-9d1b3992c9f6).html.

Full text
Abstract:
In the context of the Semantic Web, ontologies refer to the consensual and formal description of shared concepts in a domain. Ontologies are said to be a way to aid communication between humans and machines and also between machines for agent communication. The importance of ontologies for providing a shared understanding of common domains, and as a means for data exchange at the syntactic and semantic level has increased considerably in the last years. Therefore, ontology management becomes a significant task to make distributed and heterogeneous knowledge bases available to the end users. Ontology alignment is the process where ontology from different domains can be matched and processed further together, hence sharing a common understanding of the structure of information among different people. This research starts from a comprehensive review of the current development of ontology, the concepts of ontology alignments and relevant approaches. The first motivation of this work is trying to summarise the common features of ontology alignment and identify underdevelopment areas of ontology alignment. It then works on how complex businesses can be designed and managed by semantic modelling which can help define the data and the relationships between these entities, which provides the ability to abstract different kinds of data and provides an understanding of how the data elements relate. The main contributions of this work is to develop a framework of handling an important category of ontology alignment based on the logical composition of classes, especially under a case that one class from a certain domain becomes a logic prerequisites (assumption) of another class from a different domain (commitment) which only happens if the class from the first domain becomes valid. Under this logic, previously un-alignable classes or miss-aligned classes can be aligned in a significantly improved manner. A well-known rely/guarantee method has been adopted to clearly express such relationships between newly-alignable classes. The proposed methodology has be implemented and evaluated on a realistic case study.
APA, Harvard, Vancouver, ISO, and other styles
9

Sander, Jeffry D. "Characterization and design of C2H2 zinc finger proteins as custom DNA binding domains." [Ames, Iowa : Iowa State University], 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Satish, Sneha. "A Mechanism Design Approach for Mining 3-clusters across Datasets from Multiple Domains." University of Cincinnati / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1471345904.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Design Domains"

1

Peterson, M. Knowledge engineering: System design in diffuse domains. Lund: Studentlitteratur, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Marcus, Aaron, and Wentao Wang, eds. Design, User Experience, and Usability. Application Domains. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-23538-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

McGeer, Patrick C., and Robert K. Brayton. Integrating Functional and Temporal Domains in Logic Design. Boston, MA: Springer US, 1991. http://dx.doi.org/10.1007/978-1-4615-3960-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Rhea, Randall W. Discrete oscillator design: Linear, nonlinear, transient, and noise domains. Boston: Artech House, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

International Business Machines Corporation. International Technical Support Organization, ed. DataPower architectural design patterns: Integrating and securing services across domains. [Poughkeepse, NY]: IBM, International Technical Support Organization, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

McGeer, Patrick C. Integrating Functional and Temporal Domains in Logic Design: The False Path Problem and Its Implications. Boston, MA: Springer US, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

King, Brayton Robert, ed. Integrating functional and temporal domains in logic design: The false path problem and its implications. Boston: Kluwer Academic, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Tshabalala, Mavuso. Recommendation domains: Some considerations for the design of on-farm research and extension in Lesotho. Maseru, Lesotho: Research Division, Ministry of Agriculture, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

The handbook of European brand rights management: How to develop, manage and protect your trademarks, domains, designs and copyrights. London: Kogan Page, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

International Workshop on Conceptual Model-Directed Web Information Integration and Mining (1st 2004 Shanghai, China). Conceptual modeling for advanced application domains: ER 2004 Workshops, CoMoGIS, CoMWIM, ECDM, CoMoA, DGOV, and eCOMO, Shanghai, China, November 8-12, 2004 : proceedings. Berlin: Springer, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Design Domains"

1

Okereke, M., and S. Keates. "Design of Virtual Domains." In Springer Tracts in Mechanical Engineering, 145–64. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-67125-3_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Schomburg, Werner Karl. "Analogies of Physical Domains." In Introduction to Microsystem Design, 253–60. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-19489-4_19.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Schomburg, Werner Karl. "Analogies of Physical Domains." In Introduction to Microsystem Design, 303–11. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-662-47023-7_20.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Beynon-Davies, Paul. "Investigating Domains of Organisation." In Business Analysis and Design, 89–104. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-67962-0_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Aguirre, Miguel A. "Introduction to the Design Domains." In Introduction to Space Systems, 147–76. New York, NY: Springer New York, 2012. http://dx.doi.org/10.1007/978-1-4614-3758-1_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Santas, Philip S. "Conditional categories and domains." In Design and Implementation of Symbolic Computation Systems, 112–25. Berlin, Heidelberg: Springer Berlin Heidelberg, 1996. http://dx.doi.org/10.1007/3-540-61697-7_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Liski, Erkki P., Nripes K. Mandal, Kirti R. Shah, and Bikas K. Sinha. "Optimal Regression Designs in Symmetric Domains." In Topics in Optimal Design, 21–36. New York, NY: Springer New York, 2002. http://dx.doi.org/10.1007/978-1-4613-0049-6_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Liski, Erkki P., Nripes K. Mandal, Kirti R. Shah, and Bikas K. Sinha. "Optimal Regression Designs in Asymmetric Domains." In Topics in Optimal Design, 37–70. New York, NY: Springer New York, 2002. http://dx.doi.org/10.1007/978-1-4613-0049-6_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Beatty, Erin L., and Linden J. Ball. "Poetry and Design: Disparate Domains but Similar Processes." In Design Creativity 2010, 315–22. London: Springer London, 2011. http://dx.doi.org/10.1007/978-0-85729-224-7_40.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Rosenman, M. A., and J. S. Gero. "CAD modelling in multidisciplinary design domains." In Artificial Intelligence in Structural Engineering, 335–47. Berlin, Heidelberg: Springer Berlin Heidelberg, 1998. http://dx.doi.org/10.1007/bfb0030461.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Design Domains"

1

Mu'alem, Ahuva, and Michael Schapira. "Mechanism design over discrete domains." In the 9th ACM conference. New York, New York, USA: ACM Press, 2008. http://dx.doi.org/10.1145/1386790.1386797.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Doërr, Gwenaël, and Ton Kalker. "Design rules for interoperable domains." In the 8th ACM workshop. New York, New York, USA: ACM Press, 2008. http://dx.doi.org/10.1145/1456520.1456529.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Duman, Seda, and Şebnem Öğüt. "Competency Domains for Systemic Design Education." In Design Research Society LearnXDesign 2019. Design Research Society, 2019. http://dx.doi.org/10.21606/learnxdesign.2019.13077.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Mathieson, James L., Chiradeep Sen, and Joshua D. Summers. "Information Generation in the Design Process." In ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2009. http://dx.doi.org/10.1115/detc2009-87359.

Full text
Abstract:
This paper proposes and demonstrates a protocol for measuring information generated throughout a design process. The intent is to provide a consistent approach to allow the comparison of different design procedures and processes. The proposed method divides the design process into requirement, function, and component domains occurring within design iterations. To measure information or complexity in each of these domains, the elements describing the domains are counted and their mappings within and across the domains are computed. The results show that the proposed protocol and information metrics produce data points of comparable order across all domains under different design situations. Furthermore, it is shown that within-domain-coupling and across-domain-coupling metrics should be accommodate the continual increase in element count size without hiding relative changes in information generation throughout the process. When this correction is applied, it is observed that across-domain-coupling displays a decaying process of converging and diverging towards a steady state level. This presents possible support for the concepts of modeling the design process as a series of convergent and divergent processes while also suggesting that such oscillation may not be necessary.
APA, Harvard, Vancouver, ISO, and other styles
5

Lopez, Ricardo, Julie S. Linsey, and Steven M. Smith. "Characterizing the Effect of Domain Distance in Design-by-Analogy." In ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/detc2011-48428.

Full text
Abstract:
Design-by-analogy is a powerful tool to generate novel ideas. The present work explores the use of distant-domain analogies. Analogies from distant domains have a greater potential to lead to innovative solutions. This study hypothesizes that distant domain analogies lead to more abstraction resulting in more creative designs. This was evaluated with a between-subjects experiment where 17 engineering students were presented a predetermined set of analogues then asked to solve a design problem. The analogues contained two sets of analogies: one from the problem domain and one from a domain of varying distance. It was observed that although designers deemed analogies from more distant domains as ‘less useful’ and solutions generated using more distant domains ‘less effective’ and ‘less practical’, an analysis of participant’s solutions found distant domains to be at least as useful as close domains. These trends warrant future experimentation with an increased sample size.
APA, Harvard, Vancouver, ISO, and other styles
6

Eichinger, Markus, Maik Maurer, Udo Pulm, and Udo Lindemann. "Extending Design Structure Matrices and Domain Mapping Matrices by Multiple Design Structure Matrices." In ASME 8th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2006. http://dx.doi.org/10.1115/esda2006-95266.

Full text
Abstract:
Design Structure Matrices (DSMs) and Domain Mapping Matrices (DMMs) are generally used by designers for dynamic optimization of engineering design processes and products. Both methodologies help producing valuable results; however, they are lacking a holistic view onto the processes and products. Dependencies that span multiple product development domains can therefore not be recognized with isolated DSM or DMM analysis. In this paper, we present an integrative approach that combines DSMs and DMMs to obtain the Multiple Design Structure Matrix (MDSM). This methodology offers the possibility to analyze multiple product development domains using one coherent matrix representation form. A holistic perspective helps the designer to identify domain-spanning structures that would not have been recognized with single-domain optimization approaches or isolated analysis of the DSMs and DMMs. Domain-spanning structures are important to identify, as they may cause unpredictable product or process behavior. Our research showed that a holistic perspective can help designers to identify important elements more easily and therefore save time and enhance quality in analysis of engineering systems design. The framework we present consists of a proposal for the selection of appropriate product development domains, their integration, and the derivation of analysis results.
APA, Harvard, Vancouver, ISO, and other styles
7

Kuncak, Viktor, and Regis Blanc. "Interpolation for synthesis on unbounded domains." In 2013 Formal Methods in Computer-Aided Design (FMCAD). IEEE, 2013. http://dx.doi.org/10.1109/fmcad.2013.6679396.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Srinivasan, S., and R. H. Allen. "Partitioning and Guided Search: A Generalized Approach to Problem Solving in Preliminary Design." In ASME 1989 Design Technical Conferences. American Society of Mechanical Engineers, 1989. http://dx.doi.org/10.1115/detc1989-0005.

Full text
Abstract:
Abstract We report on using problem partitioning and constraint-guided search as a generalized approach to problem-solving in preliminary design. Specifically, a generic design template has been created as a tool to structure information to facilitate problem-solving in three different domains. The approach has been tested through the implementation of knowledge-based systems for the preliminary design of mechanical springs, composite sublaminates and expert systems. Information in each implementation has been partitioned as hierarchical levels of abstraction related through constraints. Function identifies the top level design goals to reduce the search involved for feasible solutions. Goal-directed search, driven by the design application and top-down refinement, reduces the number of possible alternatives. The commonalities extant in the domains have been represented as design goals at three levels of abstraction in the design template. Similar frame-based knowledge representations with inheritance hierarchies and mixed reasoning have been developed for the KEE™-based implementations in each domain. Distinctions among the domains have been modelled as low level slots in the frame hierarchy. Parametric studies in the domains of mechanical springs, composite sublaminates and expert systems indicate that the minimum number of decision levels required to characterize the preliminary design process in these domains is three; fewer levels would be insufficient to fundamentally characterize the designs. Further, it is observed hierarchical structuring of design information facilitates capturing the interactions among design variables at different levels of abstraction. By using the template representation and reasoning in other divisible domains, the effectiveness of our approach can be further investigated.
APA, Harvard, Vancouver, ISO, and other styles
9

Tucker, Conrad S., and Sung Woo Kang. "A Bisociative Design Framework for Knowledge Discovery Across Seemingly Unrelated Product Domains." In ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/detc2012-70764.

Full text
Abstract:
The Bisociative Design framework proposed in this work aims to quantify hidden, previously unknown design synergies/insights across seemingly unrelated product domains. Despite the overabundance of data characterizing the digital age, designers still face tremendous challenges in transforming data into knowledge throughout the design processes. Data driven methodologies play a significant role in the product design process ranging from customer preference modeling to detailed engineering design. Existing data driven methodologies employed in the design community generate mathematical models based on data relating to a specific domain and are therefore constrained in their ability to discover novel design insights beyond the domain itself (I.e., cross domain knowledge). The Bisociative Design framework proposed in this work overcomes the limitations of current data driven design methodologies by decomposing design artifacts into form patterns, function patterns and behavior patterns and then evaluating potential cross-domain design insights through a proposed multidimensional Bisociative Design metric. A hybrid marine model involving multiple domains (capable of flight and marine navigation) is used as a case study to demonstrate the proposed Bisociative Design framework and explain how associations and novel design models can be generated through the discovery of hidden, previously unknown patterns across multiple, unrelated domains.
APA, Harvard, Vancouver, ISO, and other styles
10

Krishnan, Subramanian, and Edward B. Magrab. "Performing DFM Analysis in Multiple Domains Using Interchangeable Manufacturable Entities." In ASME 1997 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/detc97/cie-4282.

Full text
Abstract:
Abstract An integrated design for manufacture system that performs manufacturability analysis simultaneously in two domains using interchangeable process specific entities is presented. This new approach is illustrated by an integrated system that creates and evaluates parts for manufacture by injection molding using a C-entity, and simultaneously creates and evaluates its mold for manufacture by milling using the fundamental manufacturing entity for milling. The entity for the part manufacturing process is chosen as the complement of the entity for the mold manufacturing process. This obviates the need for converting features from one manufacturing domain to another, and also permits a single uniform data structure to capture the shape characteristics of parts made in the two manufacturing domains. Since all the shapes are represented in the same way, the manufacturability evaluation of the part and the mold is reduced to a small set of algorithms based on an evaluation of the entity’s profile. It is demonstrated that by using process specific entities one can perform manufacturability evaluation of a part without either feature extraction or designing with features. The advantages of using the process specific entities approach for design and manufacturability evaluation over the feature recognition and the design by features approach are enumerated.
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Design Domains"

1

Granacki, John, and Tauseef Kazi. PMoct: A Policy Management Tool for OCT Based Design Systems for Multiple Domains. Fort Belvoir, VA: Defense Technical Information Center, October 1993. http://dx.doi.org/10.21236/ada285822.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Helton, J. W. Frequency Domain Design of Robust Controllers. Fort Belvoir, VA: Defense Technical Information Center, September 1988. http://dx.doi.org/10.21236/ada200746.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

SOFTWARE PRODUCTIVITY CONSORTIUM HERNDON VA. Domain Analysis and Design. Version 01.00.05. Fort Belvoir, VA: Defense Technical Information Center, May 1996. http://dx.doi.org/10.21236/ada309677.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Swanson, Paul, and Andrew Wang. Time Domain Switched Accelerometer Design and Fabrication. Fort Belvoir, VA: Defense Technical Information Center, September 2014. http://dx.doi.org/10.21236/ada611322.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Tare, Medha, Susanne Nobles, and Wendy Xiao. Partnerships that Work: Tapping Research to Address Learner Variability in Young Readers. Digital Promise, March 2018. http://dx.doi.org/10.51388/20.500.12265/67.

Full text
Abstract:
Over the past several decades, the student population in the United States has grown more diverse by factors including race, socioeconomic status, primary language spoken at home, and learning differences. At the same time, learning sciences research has advanced our understanding of learner variability and the importance of grounding educational practice and policy in the individual, rather than the fiction of an average student. To address this gap, LVP distills existing research on cognitive, social and emotional, content area, and background Learner Factors that affect learning in various domains, such as reading and math. In conjunction with the development process, LPS researchers worked with ReadWorks to design studies to assess the impact of the newly implemented features on learner outcomes.
APA, Harvard, Vancouver, ISO, and other styles
6

Peterson, A. S., Jr Stanley, and Jay L. Mapping a Domain Model and Architecture to a Generic Design. Fort Belvoir, VA: Defense Technical Information Center, May 1994. http://dx.doi.org/10.21236/ada283747.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kroll, Norman M. Applications of Time Domain Simulation to Coupler Design for Periodic Structures. Office of Scientific and Technical Information (OSTI), September 2000. http://dx.doi.org/10.2172/765007.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Helton, J. W. Design of Robust Controllers: Frequency Domain Methods and Their Non-Linear Extensions. Fort Belvoir, VA: Defense Technical Information Center, December 1999. http://dx.doi.org/10.21236/ada380889.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Sharp, Jeremy, Locke Williams, Duncan Bryant, Jake Allgeier, Kevin Pigg, Gary Bell, and Dana Moses. Rough River Outlet Works physical model study. Engineer Research and Development Center (U.S.), June 2021. http://dx.doi.org/10.21079/11681/41043.

Full text
Abstract:
The US Army Corps of Engineers, Louisville District, requested the support and assistance of the US Army Engineer Research and Development Center, Coastal and Hydraulics Laboratory (CHL), in the evaluation of the hydraulic performance of the replacement Outlet Works for Rough River Dam. To support the design effort, CHL constructed a 1:25.85 scale physical model. The proposed features of the model in the domain are the curved approach channel, intake structure, transition, curved conduit, stilling basin, concrete apron, and retreat channel. Tests performed to evaluate the hydraulic performance illuminated a few design concerns. To address these issues, several key design changes were made. These included the retreat channel slope, end sill design, and transition design.
APA, Harvard, Vancouver, ISO, and other styles
10

Tyler, Stephen C. The Design of a Frequency Domain Interference Excision Processor Using Field Programmable Gate Arrays. Fort Belvoir, VA: Defense Technical Information Center, January 2005. http://dx.doi.org/10.21236/ada432369.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Design Domains' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography