Relevant bibliographies by topics / Design features of the flute

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Design features of the flute'

Author: Grafiati
Published: 28 May 2022
Last updated: 30 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Design features of the flute.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Design features of the flute"

1

Pertsov, Mykyta. "Flute: Design, Technical and Expressive Features." Bulletin of KNUKiM. Series in Arts, no. 43 (December 22, 2020): 109–13. https://doi.org/10.31866/2410-1176.43.2020.220107.

Full text
Abstract:
The purpose of the article is to analyse the current developments in the flute construction, outline the essential changes associated with its technical and expressive features, and the prospects for its application in musical culture; to consider the samples of flute modification that were carried out after the T. Boehm’s reform. The research methodology consists in using historical and analytical approaches to highlight the features of flute development, as well as a comparative method in the analysis of changes in the flute construction. The scientific novelty of the study lies in the
APA, Harvard, Vancouver, ISO, and other styles
2

Kachmarchyk, Volodymyr, and Nataliia Kachmarchyk. "A “Well-tempered Flute” by T. Boehm – The Final Stage of its Evolution and the Standardization of its Tuning System." Studia Universitatis Babeş-Bolyai Musica 67, Special Issue 1 (2022): 49–62. http://dx.doi.org/10.24193/subbmusica.2022.spiss1.04.

Full text
Abstract:
"The article is dedicated to the development of the flute acoustic and tuning systems during the 18th-19th centuries. Based on the analysis of J. J. Quantz's treatise »Versuch einer Anweisung, die Flöte traversiere zu spielen« and the flute of its construction with two enharmonically unequal keys Es and Di s, the intonation and technological features of using pure tuning system in playing an instrument are revealed. Following Quantz’s ideas was another German musician, the Leipzig master instrument maker J. G. Tromlitz. He strongly recommended maintaining the dominant position of the pure tuni
APA, Harvard, Vancouver, ISO, and other styles
3

Shen, Xing Quan, B. Q. Pei, X. J. Zhu, and H. Gao. "Optimizing Design of the Helix Flute Grinding Parameters with a 6UPS Parallel Grinding Machine." Key Engineering Materials 304-305 (February 2006): 540–44. http://dx.doi.org/10.4028/www.scientific.net/kem.304-305.540.

Full text
Abstract:
The helix flute grinding was important to machine a complex revolving tool. The geometric parameters (especial its rake angle, flute depth and flute width) have essential effect on the performances of the tool. Using the 6UPS parallel grinding machine developed from BEIHANG, especially after analyzing its special machining and structure features, this paper gave general analysis to all factors which will influence the flute shaping. According to the moving relationship between grinding wheel and the tool, a simulation modeling system was established. This system could be adopted to optimize an
APA, Harvard, Vancouver, ISO, and other styles
4

Lebedev, A. T., R. R. Iskanderov, and A. S. Shumsky. "Determination of Design Parameters for Horizontal Rotary Crushers for Feed Grain." Agricultural Machinery and Technologies 12, no. 5 (2018): 9–13. http://dx.doi.org/10.22314/2073-7599-2018-12-5-9-13.

Full text
Abstract:
A horizontal impact crusher provides for high­quality grinding of grain materials and getting the finished product equalized by particle size distribution to 98 percent. The effectiveness of the crusher is determined by the following parameters: rotor speed, operating clearance, intensity and full filling of the crushing chamber, the duration of impact on the original product, the design features of the working bodies and the geometric design of their corrugated surfaces. (Research purpose) To determine the design parameters of a horizontal rotary crusher for feed grains. (Materials and method
APA, Harvard, Vancouver, ISO, and other styles
5

Wu, Lien-Chen, Yueh-Ying Hsieh, Fon-Yih Tsuang, Yi-Jie Kuo, and Chang-Jung Chiang. "Cutting Flute and Thread Design on Self-Tapping Pedicle Screws Influence the Insertion Torque and Pullout Strength." Applied Sciences 12, no. 4 (2022): 1956. http://dx.doi.org/10.3390/app12041956.

Full text
Abstract:
Self-tapping screws are commonly used in trauma and maxillofacial surgery and are increasingly used for pedicle screw insertions. In order to evaluate how the quantity and length of cutting flutes on self-tapping pedicle screws affect the insertion torque and pullout strength, eight different self-tapping pedicle screw designs were evaluated. All screws had a threaded length of 35 mm and featured variations in the number of leads, as well as the length and quantity of cutting flutes. Five samples of each design were inserted into pre-drilled, untapped holes (ø2.7 mm, length 35 mm) in sawbone b
APA, Harvard, Vancouver, ISO, and other styles
6

Tansella, Francesca, Luisa Vigorelli, Gabriele Ricchiardi, et al. "X-ray Computed Tomography Analysis of Historical Woodwind Instruments of the Late Eighteenth Century." Journal of Imaging 8, no. 10 (2022): 260. http://dx.doi.org/10.3390/jimaging8100260.

Full text
Abstract:
In this work, two historical flutes of the late eighteenth century were analysed by means of X-ray computed tomography (CT). The first one is a piccolo flute whose manufacturer is unknown, though some features could suggest an English or American origin. The second musical instrument is a baroque transverse flute, probably produced by Lorenzo Cerino, an Italian instrument maker active in Turin (Italy) in the late eighteenth century. Analyses carried out provided information on manufacturing techniques, materials and conservation state, and are suitable to plan restoration intervention. In part
APA, Harvard, Vancouver, ISO, and other styles
7

Izamshah, Raja, Nurul Husna, Mohd Hadzley, Mohd Amran, Mohd Shahir Kasim, and S. Amri. "Determination on the Effect of Cutter Geometrical Feature for Machining Polyetheretherketone (PEEK) Using Taguchi Methods." Applied Mechanics and Materials 699 (November 2014): 192–97. http://dx.doi.org/10.4028/www.scientific.net/amm.699.192.

Full text
Abstract:
This paper details the application of Taguchi method to determine the effect of cutter geometrical features for machining Polyetheretherketones (PEEK) thermoplastic. The planned experiment was conducted by using Taguchi’s orthogonal array taking into account the ball nose geometrical parameters such as helix angle, rake angle, clearance angle and number of flute. The measured response is the machined surface roughness, which is important for the component functionality. In addition, ANOVA was used to validate the percentage contribution of each factor. The obtained results reveals that, less n
APA, Harvard, Vancouver, ISO, and other styles
8

Stashevska, I., and Y. Danilchenko. "R. Dick’s Improvisation “Sliding Life Blues” for Solo Flute (transcriptioned by M. Keeling): Analysis of the Implementation of Modern Performance Techniques." Culture of Ukraine, no. 88 (March 20, 2025): 96–103. https://doi.org/10.31516/2410-5325.088.10.

Full text
Abstract:
The relevance of the topic and statement of the problem. The modern flute, which during its long evolution has undergone considerable changes in its own design, today has a huge sound and timbre expressive potential, which is largely capable of satisfying the broad artistic requirements of composers and performers. This potential lies, on the one hand, in the constructive and organological properties of the flute as a modern academic musical instrument. On the other hand, in the very system of instrumental and performing means of flute art, which today is constantly expanding and consists of a
APA, Harvard, Vancouver, ISO, and other styles
9

Wang, Moyang. "Innovative Designs in Vibration Energy Harvesting: Performance Evaluation and Comparative Analysis." Highlights in Science, Engineering and Technology 112 (August 20, 2024): 118–23. http://dx.doi.org/10.54097/tfsx1n66.

Full text
Abstract:
This paper explores the realm of vibration energy harvesting (VEH) and its potential applications in powering electronic devices. With the increasing demand for constant power supply in various sectors, including medical, transportation, and communication, the drawbacks of traditional battery solutions prompt the exploration of alternative energy sources. Vibration, omnipresent in our environment, presents itself as a promising source of mechanical energy that can be converted into electrical power. This study delves into three distinct VEH designs: a flute-inspired broadband piezoelectric dev
APA, Harvard, Vancouver, ISO, and other styles
10

Zharkov, Oleksandr, and Iryna Kokhanyk. "The timbre composition of Claude Debussy’s “Prélude à l’Après-midi d'un faune”: stylistic aspect." Scientific herald of Tchaikovsky National Music Academy of Ukraine, no. 135 (December 26, 2022): 96–111. http://dx.doi.org/10.31318/2522-4190.2022.135.271008.

Full text
Abstract:
Relevance of the study. In the 20th–21st centuries art music the timbre component determines the processes of form creating, features of composition and dramaturgy, and becomes an essential component of a composer’s individual style system. This makes it necessary to distinguish and to define the concept of timbre composition, to study its functions in forming the text of a music work.
 The purpose of the article is to study the timbre composition of “Prélude à l’Après-midi d’un faune” by Claude Debussy in the aspect of the composer’s individual style.
 Methods. The methods of system
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Design features of the flute"

1

Davis, John Edward 1954. "The extended alto flute: The history and development of the alto flute, with a study of modern alto flute design and its effect on extended techniques in alto flute repertoire and pedagogical materials." Diss., The University of Arizona, 1997. http://hdl.handle.net/10150/288758.

Full text
Abstract:
The purpose of this document is to trace the origin of the modern alto flute from its beginning through Theobald Boehm's design, compare the designs and acoustical qualities of modern alto and c-flutes; identify the various types of extended techniques found in contemporary alto and c-flute repertoire with attention as to how the realizion of these techniques may differ for alto and c-flute; and survey representative works for alto flute that incorporate extended techniques. Chapter I follows the development of larger flutes from examples found in Renaissance-period sources up to the early nin
APA, Harvard, Vancouver, ISO, and other styles
2

Zhang, Shane Xue Ying. "Value in design? Features, pricing, and design strategies." Thesis, Massachusetts Institute of Technology, 2020. https://hdl.handle.net/1721.1/129841.

Full text
Abstract:
Thesis: M. Arch. in Real Estate Development, Massachusetts Institute of Technology, Department of Architecture, February, 2020<br>Thesis: S.M. in Real Estate Development, Massachusetts Institute of Technology, Program in Real Estate Development in conjunction with the Center for Real Estate, February, 2020<br>Cataloged from student-submitted thesis.<br>Includes bibliographical references (page 45).<br>Where is the value of design? Clients who are using buildings to solve societal economic needs rely heavily on real estate asset valuation models to guide their decision-making process; however,
APA, Harvard, Vancouver, ISO, and other styles
3

Fackrell, Lara L. "Equestrian communities : design features and development process." Thesis, Manhattan, Kan. : Kansas State University, 2008. http://hdl.handle.net/2097/792.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Івашина, Каріна Олександрівна, and Л. В. Роєнко. "Interior design features in preschool education institutions." Thesis, Київський національний університет технологій та дизайну, 2021. https://er.knutd.edu.ua/handle/123456789/18246.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kolosnichenko, Maryna, and Yevheniia Holovchanska. "Features of design of modern women's blouses." Thesis, Учреждение образования "Витебский государственный технологический университет", 2021. https://er.knutd.edu.ua/handle/123456789/18558.

Full text
Abstract:
Women's blouses are an integral part of modern women's wardrobe. Due to the range and style diversity, they are used in various situations and are included in such dress codes as creative black tie, semi-formal A5, dressy casual A5, casual, business traditional, business best. Research of features of modern blouses' design will allow the increasing quality of collections of models of the designed clothes.
APA, Harvard, Vancouver, ISO, and other styles
6

Epstein, Justin. "Cruise Ship Preliminary Design: The Influence of Design Features on Profitability." ScholarWorks@UNO, 2014. http://scholarworks.uno.edu/td/1914.

Full text
Abstract:
This thesis provides a means to estimate the physical and performance characteristics of a preliminary cruise ship design. The techniques utilized to estimate these characteristics are showcased in the user-friendly interface known as the Cruise Ship Analysis Tool (CSAT). Using the CSAT, the implications that design feature decisions in the preliminary design stage have on a cruise ship’s profitability is analyzed. Then, the most profitable design feature assemblage among a finite number of varying design feature combinations is estimated and compared among cruise ship designs with different p
APA, Harvard, Vancouver, ISO, and other styles
7

Katragadda, Monica. "User Testing/Co-Design of Current PIVOT Features." University of Cincinnati / OhioLINK, 2021. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1627665047979343.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Голуб, Ольга Ігорівна. "Features of using parallax effect in web design." Thesis, Київський національний університет технологій та дизайну, 2020. https://er.knutd.edu.ua/handle/123456789/15282.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Holovchanska, Yevheniia, Tatiana Kucher, and Maryna Kolosnichenko. "Research of design features of memento mori rings." Thesis, Institutul Patrimoniului Cultural, 2021. https://er.knutd.edu.ua/handle/123456789/19008.

Full text
Abstract:
The theme of memory and sorrow can be traced in the art of jewellery since antiquity and had several meanings: romantic (until death do us part), mourning (in memory of the deceased), philosophical (memento mori, remember death). This type of ring still serves as a memorable element of death in the tribes of Africa, Mexico, in the subcultures of the Goths and Punks. The thesis is dedicated to the study of the design features of the memento mori ring from antiquity to the 19th century.<br>Тема пам'яті та скорботи простежується в ювелірному мистецтві ще з часів Античності і мала декілька значень
APA, Harvard, Vancouver, ISO, and other styles
10

Houston, Graham James Leslie. "Understanding buckling containment features for aerospace panel design." Thesis, Queen's University Belfast, 2016. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.706978.

Full text
Abstract:
To improve aircraft structural performance requires practical design changes and better incorporation of advanced technologies. Instability failure modes typically constrain aerospace panel designs because buckling occurs at stresses less than that of material yield. Buckling containment features, small stiffeners located between the primary stiffeners/stringers, provide the ability to significantly improve panel-buckling stresses and thus exploit the full potential of available materials. Inclusion of buckling containment features into industrial panel sizing procedures is constrained by the
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Design features of the flute"

1

Urquhart, Paul. Landscaping features. Murdoch Books, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

P, Smith Robert. Identifying controlling features of engineering design iteration. Alfred P. Sloan School of Management, Massachusetts Institute of Technology, 1992., 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

P, Smith Robert. Identifying controlling features of engineering design iteration. Sloan School of Management, Massachusetts Institute of Technology, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Alejandro, Bahamón, ed. Water features. Rockport, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Haites, Erik F. Analysis of emissions trading program design features. National Round Table on the Environment and the Economy = Table ronde nationale sur l'environnement et l'économie, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Prosper, Vera. Design features in housing for older persons. New York State, Office for the Aging, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Hegstad, Sven Olaf. Management contracts: Main features and design issues. World Bank, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Dober, Richard P. Campus landscape: Functions, forms, features. Wiley, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Elsas, Peter Alexander van. Free-form displacement features in conceptual shape design. Delft University Press, 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Company, Garlinghouse, ed. Small home plans: With big home design features. L.F. Garlinghouse Co., 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Design features of the flute"

1

Mahatkarsa, Gilang Ciptadi, and Yudi Sukmayadi. "Android-Based Flute Learning Media." In Proceedings of the Fifth International Conference on Arts and Design Education (ICADE 2022). Atlantis Press SARL, 2023. http://dx.doi.org/10.2991/978-2-38476-100-5_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Rude, Stefan, and Mike Pratt. "Design by Features." In Advanced Modelling for CAD/CAM Systems. Springer Berlin Heidelberg, 1991. http://dx.doi.org/10.1007/978-3-642-76586-5_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Bhangal, Sham, and Tomasz Jankowski. "Special Image Features." In Foundation Web Design. Apress, 2003. http://dx.doi.org/10.1007/978-1-4302-5231-3_10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Lipsett, Roger, Carl F. Schaefer, and Cary Ussery. "Advanced Features." In VHDL: Hardware Description and Design. Springer US, 1989. http://dx.doi.org/10.1007/978-1-4613-1631-2_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Mogensen, Torben Ægidius. "More Language Features." In Introduction to Compiler Design. Springer International Publishing, 2024. http://dx.doi.org/10.1007/978-3-031-46460-7_12.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Schouten, Barry, Andy Peytchev, and James Wagner. "Interventions and Design Features." In Adaptive Survey Design. Chapman and Hall/CRC, 2017. http://dx.doi.org/10.1201/9781315153964-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Wiley, R. Haven. "Design Features of Language." In Encyclopedia of Evolutionary Psychological Science. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-16999-6_3837-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Segerdahl, Pär, William Fields, and Sue Savage-Rumbaugh. "Design Features of Language." In Kanzi's Primal Language. Palgrave Macmillan UK, 2005. http://dx.doi.org/10.1057/9780230513389_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

van Leeuwen, Jos P., and Harry Wagter. "Architectural Design-by-Features." In CAAD futures 1997. Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-011-5576-2_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Wiley, R. Haven. "Design Features of Language." In Encyclopedia of Evolutionary Psychological Science. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-319-19650-3_3837.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Design features of the flute"

1

Licata, Anthony J., Louis A. Terracciano, Robert W. Herbert, and Ulrich Kaiser. "Design Features for Superheater Corrosion Control in Municipal Waste Combustors." In CORROSION 1989. NACE International, 1989. https://doi.org/10.5006/c1989-89205.

Full text
Abstract:
Abstract Boiler tube design for waste-to-energy applications has greatly evolved over the past 10 years with primary emphasis on reducing the very severe erosion/ corrosion of superheater tubes. Erosion is primarily caused by large solid particles in the flue gas stream, impacting against superheater surfaces. Another cause of superheater tube erosion is air and steam jet sootblowing which cuts the tubes by impingement against them. Corrosion of superheater tubes caused by the presence of chlorides at high tube metal temperatures as well as by localized reducing environments is discussed with
APA, Harvard, Vancouver, ISO, and other styles
2

Bochicchio, Victor A. "FRP Chimney Liners for Power Plant Flue Gas Desulfurization – a Chimney Supplier’s Perspective." In CORROSION 2011. NACE International, 2011. https://doi.org/10.5006/c2011-11366.

Full text
Abstract:
Abstract The addition of Wet Flue Gas Desulphurization (WFGD) systems to existing coal fired power plants, and at several new plants, has resulted in the installation of over 90 FRP chimney liners in concrete chimneys during the past 6 years. The lower flue gas temperatures in power plants with WFGD increases corrosion concerns for chimney lining materials and often leads to the selection of FRP as the liner material of choice. Although the design and manufacture of the FRP liner is usually performed by a specialty FRP supplier, the integration of the liner into the overall chimney design and
APA, Harvard, Vancouver, ISO, and other styles
3

Cincotti, G. "Advanced features in AWG design." In 2024 IEEE Photonics Conference (IPC). IEEE, 2024. https://doi.org/10.1109/ipc60965.2024.10799709.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Watanabe, H., and B. Ackland. "Flute - A Floorplanning Agent for Full Custom VLSI Design." In 23rd ACM/IEEE Design Automation Conference. IEEE, 1986. http://dx.doi.org/10.1109/dac.1986.1586149.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Watanabe, Hiroyuki, and Bryan Ackland. "Flute---a floorplanning agent for full custom VLSI design." In the 23rd ACM/IEEE conference. ACM Press, 1986. http://dx.doi.org/10.1145/318013.318111.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Torabi, Amin J., Olivier Massol, Er Meng Joo, et al. "Flute based analysis of ball-nose milling signals using continuous wavelet analysis features." In Vision (ICARCV 2010). IEEE, 2010. http://dx.doi.org/10.1109/icarcv.2010.5707947.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Nikmatillah, Hari Rizky, and Yudi Sukmayadi. "SUNDANESE Flute Learning Multimedia Planning in Vocational High School." In 4th International Conference on Arts and Design Education (ICADE 2021). Atlantis Press, 2022. http://dx.doi.org/10.2991/assehr.k.220601.031.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Sohnemann, Jens, Walter Schäfers, and Armin Main. "Waste Combustion Technology Developments for Large Scale Plants." In 20th Annual North American Waste-to-Energy Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/nawtec20-7035.

Full text
Abstract:
For the waste disposal of urban areas and major cities at the North American market place rather large scale energy from waste (EfW) plants are needed. This implies a mechanical input of approx. 40 Mg/h [39.36 tn l./h] and thermal input by waste per unit of 110 MW [375.3 MBTU/h] and more. There are basic design criteria that feature large scale EfW plants: - Layout of boiler with horizontal or vertical orientation of convective part. - Top or bottom suspension of boiler. - Flexible design of stoker regarding large throughput figures and heating values of waste with water or air cooled grate ba
APA, Harvard, Vancouver, ISO, and other styles
9

Jie, Yang, Li Haitao, Rui Chengjie, Wei Wenjun, and Dong Xuezhu. "Research on a Generating Method of Spiral Flutes of Hourglass Worm Gear Hob." In ASME 2017 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/detc2017-67053.

Full text
Abstract:
All of the cutting edges on an hourglass worm gear hob have different shapes and spiral angles. If the spiral angles are small, straight flutes are usually adopted. But for the hob with multiple threads, the absolute values of the negative rake angles at one side of the cutting teeth will greatly affect the cutting performance of the hob if straight flutes are still used. Therefore, spiral flutes are usually adopted to solve the problem. However, no method of determination of the spiral flute of the hourglass worm gear hob has been put forward till now. Based on the curved surface generating t
APA, Harvard, Vancouver, ISO, and other styles
10

Shorr, Michael J., and Steven Y. Liang. "Dynamic Stability Analysis for Multi-Flute End Milling." In ASME 1995 Design Engineering Technical Conferences collocated with the ASME 1995 15th International Computers in Engineering Conference and the ASME 1995 9th Annual Engineering Database Symposium. American Society of Mechanical Engineers, 1995. http://dx.doi.org/10.1115/detc1995-0586.

Full text
Abstract:
Abstract This research discusses the methodology of developing a symbolic closed form solution that describes the dynamic stability of multi-flute end milling. A solution of this nature facilitates machine tool design, machining parameter planning, process monitoring, diagnostics, and control. This study establishes a compliance feedback model that describes the dynamic behavior of regenerative chatter for multi-flute tool-work interaction. The model formulates the machining dynamics based upon the interconnecting relationship of the tool geometry convolution and the machining system complianc
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Design features of the flute"

1

Heinsch, Faith Ann, and Patricia L. Andrews. BehavePlus fire modeling system, version 5.0: Design and Features. U.S. Department of Agriculture, Forest Service, Rocky Mountain Research Station, 2010. http://dx.doi.org/10.2737/rmrs-gtr-249.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Holton, L. K. Jr. Design features of the radioactive Liquid-Fed Ceramic Melter system. Office of Scientific and Technical Information (OSTI), 1985. http://dx.doi.org/10.2172/5459397.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Blue, T. E., and K. Vafai. Thermal hydraulic design features for the BNCT application. Final report. Office of Scientific and Technical Information (OSTI), 1993. http://dx.doi.org/10.2172/10168748.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

John M. Ryskamp, Phil Hildebrandt, Osamu Baba, et al. Design Features and Technology Uncertainties for the Next Generation Nuclear Plant. Office of Scientific and Technical Information (OSTI), 2004. http://dx.doi.org/10.2172/991917.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Miller, J. R. Impact of several reactor features on TF coil design for TPSS. Office of Scientific and Technical Information (OSTI), 1986. http://dx.doi.org/10.2172/6294457.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Miller, J. R., and R. H. Bulmer. Impact of several reactor features on TF coil design for TPSS. Office of Scientific and Technical Information (OSTI), 1986. http://dx.doi.org/10.2172/6002264.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Elmore, M. R., D. H. Siemens, and C. C. Chapman. Noble metals-compatible melter features development Phase 1: Establishing functional and design criteria and design concepts. Office of Scientific and Technical Information (OSTI), 1996. http://dx.doi.org/10.2172/215883.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

SEXTON, R. A. Drop Accidents in the Canister Storage Building (CSB) Addressed by Design Features and or Design Calculations. Office of Scientific and Technical Information (OSTI), 2000. http://dx.doi.org/10.2172/801168.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Westra, D. P., G. Lintern, D. J. Sheppard, K. E. Thomley, and R. Mauk. Simulator Design and Instructional Features for Carrier Landing: A Field Transfer Study. Defense Technical Information Center, 1986. http://dx.doi.org/10.21236/ada169962.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Meier, W. R., and W. J. Hogan. Identifying heavy-ion-beam fusion design and system features with high economic leverage. Office of Scientific and Technical Information (OSTI), 1985. http://dx.doi.org/10.2172/5466424.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Design features of the flute' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography