Log in

Relevant bibliographies by topics / Design-for-manufacturability / Journal articles

To see the other types of publications on this topic, follow the link: Design-for-manufacturability.

Journal articles on the topic 'Design-for-manufacturability'

Author: Grafiati

Published: 4 June 2021

Last updated: 25 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Design-for-manufacturability.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Hu, J., and S. Sapatnekar. "Editorial: Design for manufacturability." IET Circuits, Devices & Systems 2, no. 1 (2008): 1. http://dx.doi.org/10.1049/iet-cds:20089003.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

George, L. J., John W. Priest, and G. T. Stevens. "Proprinter design for manufacturability." Computers & Industrial Engineering 25, no. 1-4 (1993): 481–85. http://dx.doi.org/10.1016/0360-8352(93)90325-r.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Balasinski, Artur. "Optimizing IC Design for Manufacturability." Recent Patents on Electrical Engineeringe 1, no. 3 (2008): 209–13. http://dx.doi.org/10.2174/1874476110801030209.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Strojwas, Andrzej J. "Design for manufacturability and yield." Microelectronics Journal 21, no. 2 (1990): 53–66. http://dx.doi.org/10.1016/0026-2692(90)90026-y.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Radojcic, Riko, Dan Perry, and Mark Nakamoto. "Design for manufacturability for fabless manufactuers." IEEE Solid-State Circuits Magazine 1, no. 3 (2009): 24–33. http://dx.doi.org/10.1109/mssc.2009.933437.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Goldberg, Jay R. "Design transfer and design for manufacturability [Senior Design]." IEEE Pulse 4, no. 1 (2013): 46–47. http://dx.doi.org/10.1109/mpul.2012.2228588.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Smith, G. "Design for manufacturability comes of age." IEEE Design & Test of Computers 22, no. 3 (2005): 288. http://dx.doi.org/10.1109/mdt.2005.57.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Kahng, Andrew B. "Design for manufacturability: Then and now." IEEE Design & Test of Computers 28, no. 1 (2011): 76–77. http://dx.doi.org/10.1109/mdt.2011.12.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Lianos, Andreas K., Sotiris Koutsoukos, Harry Bikas, and Panagiotis Stavropoulos. "Manufacturability Assessment and Design for AM." Procedia CIRP 91 (2020): 290–94. http://dx.doi.org/10.1016/j.procir.2020.02.178.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Bancroft, C. "Overlooked aspects of design for manufacturability." IEEE Circuits and Devices Magazine 4, no. 6 (1988): 15–19. http://dx.doi.org/10.1109/101.9571.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Troitsky, Alexandr. "Design formulae of product design production manufacturability." Science intensive technologies in mechanical engineering 2020, no. 7 (2020): 31–34. http://dx.doi.org/10.30987/2223-4608-2020-7-31-34.

Full text

Abstract:

There are shown basic drawbacks of the well-known factors of manufacturability. The formulae of manufacturability factors excluding mentioned drawbacks and taking into account the impact of product design characteristics upon complete laboriousness of its manufacturing are offered. The developed formulae of these manufacturability factors give possibility for obtaining an integral estimate of manufacturability by means of their summation.

APA, Harvard, Vancouver, ISO, and other styles

12

Liu, Hong Jun, Xiao Yan Tong, Sheng Li Lv, and Qing Ming Fan. "Design for Manufacture and Integrated Manufacturability Evaluation System." Advanced Materials Research 476-478 (February 2012): 2567–70. http://dx.doi.org/10.4028/www.scientific.net/amr.476-478.2567.

Full text

Abstract:

In the light of growing global competition, organizations around the world today are constantly under pressure to produce high-quality products at an economical price. The integration of design and manufacturing activities into one common engineering effort has been recognized as a key strategy for survival and growth. Design for manufacturability (DFM) requires product designers to simultaneously consider the manufacturing issues of a product along with the geometrical and design aspects. In this paper, part manufacturability was analyzed in detail. An evaluation system of DFM was proposed. P

APA, Harvard, Vancouver, ISO, and other styles

13

Irzaev, Gamid, Magomedimin Kanaev, and Marzhanat Isalova. "Selection of the preferred design for manufacturability by constructing the Pareto tuple." Journal of Applied Engineering Science 19, no. 2 (2021): 275–81. http://dx.doi.org/10.5937/jaes0-26922.

Full text

Abstract:

The system to ensure manufacturability of industrial products is aimed at reducing the costs of all types of resources at the stages of their life cycle, selecting the most competitive in cost and functionality designs at the early stages of engineering. When assessing the new designs for manufacturability to be developed and selecting the best analogue or basic reference standard in terms of manufacturability, the engineer faces the need to apply multicriteria optimization methods. The solution of the applied task of design optimization by quantitative criteria of manufacturability in the con

APA, Harvard, Vancouver, ISO, and other styles

14

TAUBER, Tobias. "Design for Manufacturability Accelerates New Product Pipeline." Journal of the Japan Society for Precision Engineering 87, no. 5 (2021): 410–12. http://dx.doi.org/10.2493/jjspe.87.410.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Balasinski, Artur. "Optimizing IC Design for Manufacturability - 2011 Update." Recent Patents on Electrical & Electronic Engineering e 5, no. 2 (2012): 134–54. http://dx.doi.org/10.2174/2213111611205020134.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Youssef, Mohamed A. "Design for manufacturability and time‐to‐market." International Journal of Operations & Production Management 15, no. 1 (1995): 6–23. http://dx.doi.org/10.1108/01443579510077160.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Maly, W. "Computer-aided design for VLSI circuit manufacturability." Proceedings of the IEEE 78, no. 2 (1990): 356–92. http://dx.doi.org/10.1109/5.52217.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Lu, J. C., W. C. Holton, J. S. Fenner, et al. "A new device design methodology for manufacturability." IEEE Transactions on Electron Devices 45, no. 3 (1998): 634–42. http://dx.doi.org/10.1109/16.661225.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

MATUSZEK, Józef, Tomasz SENETA, and Aleksander MOCZAŁA. "FUZZY ASSESSMENT OF MANUFACTURABILITY DESIGN FOR MACHINING." Applied Computer Science 15, no. 3 (2019): 45–55. http://dx.doi.org/10.35784/acs-2019-20.

Full text

Abstract:

The article attempts to assess the manufacturability design taking into account the assessment due to the processing, assembly process and organization of production. The evaluation was conducted by the fuzzy inference methods. An assessment was presented for machining based on the proposed fuzzy inference database.

APA, Harvard, Vancouver, ISO, and other styles

20

Onitsuka, H. "Productivity evaluation method and design for manufacturability." JSAE Review 16, no. 4 (1995): 375–81. http://dx.doi.org/10.1016/0389-4304(95)00042-6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Ahmed, Khaled. "53‐4: Dielectric Metasurfaces: Design for Manufacturability." SID Symposium Digest of Technical Papers 51, no. 1 (2020): 785–88. http://dx.doi.org/10.1002/sdtp.13986.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Shu, Tian Jia, and Xiao Qiang Zhong. "Evaluation Model of Product Manufacturability for Rapid Response Design." Advanced Materials Research 542-543 (June 2012): 281–84. http://dx.doi.org/10.4028/www.scientific.net/amr.542-543.281.

Full text

Abstract:

Rapid Response Design (RRD) attempts to put the product design into effect in the minimum time to satisfy the customer requirements. Product manufacturability has a very important effect on the performance of product design, especially in the progress of rapid response design. The concept of product manufacturability is usually considered as a multi-objective problem. An effective product manufacturability evaluation procedure necessitates the consideration of qualitative criteria, e.g., product quality, as well as quantitative criteria such as material cost in the decision process. This paper

APA, Harvard, Vancouver, ISO, and other styles

23

Mansfield, Scott. "Through-process modeling for design-for-manufacturability applications." Journal of Micro/Nanolithography, MEMS, and MOEMS 6, no. 3 (2007): 031007. http://dx.doi.org/10.1117/1.2774987.

Full text

APA, Harvard, Vancouver, ISO, and other styles

24

Malikova, D. M. "DEVELOPMENT OF A METHODOLOGY FOR ASSESSING THE MANUFACTURABILITY OF INDUSTRIAL PRODUCTS IN THE CONDITIONS OF PILOT PRODUCTION." Bulletin of Udmurt University. Series Economics and Law 31, no. 4 (2021): 597–602. http://dx.doi.org/10.35634/2412-9593-2021-31-4-597-602.

Full text

Abstract:

The article is devoted to improving the reliability of a comprehensive quantitative assessment of the technological performance of the product design in the conditions of pilot production, taking into account the specific production and technological conditions of the enterprise by solving the problem of objective selection of technological performance indicators. To achieve this goal, the following tasks were solved: the indicators of the manufacturability of product designs, their quantitative assessment were studied; a mathematical model for the formation of design indicators of manufactura

APA, Harvard, Vancouver, ISO, and other styles

25

Nielsen, Niels Peter Heeser, and Jan Holmström. "Design for speed: a supply chain perspective on design for manufacturability." Computer Integrated Manufacturing Systems 8, no. 3 (1995): 223–28. http://dx.doi.org/10.1016/0951-5240(95)00016-m.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

Liu, Hong Jun, Xiao Yan Tong, and Sheng Li Lv. "A Fuzzy Set AHP-Based Design for Manufacture Method." Advanced Materials Research 548 (July 2012): 461–64. http://dx.doi.org/10.4028/www.scientific.net/amr.548.461.

Full text

Abstract:

In the light of growing global competition, organizations around the world today are constantly under pressure to produce high-quality products at an economical price. The integration of design and manufacturing activities into one common engineering effort has been recognized as a key strategy for survival and growth. Design for manufacturability (DFM) requires product designers to simultaneously consider the manufacturing issues of a product along with the geometrical and design aspects. In this paper, part manufacturability was analyzed in detail. An evaluation system of DFM was proposed. P

APA, Harvard, Vancouver, ISO, and other styles

27

Lianos, Andreas K., Harry Bikas, and Panagiotis Stavropoulos. "A Shape Optimization Method for Part Design Derived from the Buildability Restrictions of the Directed Energy Deposition Additive Manufacturing Process." Designs 4, no. 3 (2020): 19. http://dx.doi.org/10.3390/designs4030019.

Full text

Abstract:

The design methodologies and part shape algorithms for additive manufacturing (AM) are rapidly growing fields, proven to be of critical importance for the uptake of additive manufacturing of parts with enhanced performance in all major industrial sectors. The current trend for part design is a computationally driven approach where the parts are algorithmically morphed to meet the functional requirements with optimized performance in terms of material distribution. However, the manufacturability restrictions of AM processes are not considered at the primary design phases but at a later post-mor

APA, Harvard, Vancouver, ISO, and other styles

28

Bazrov, Boris. "Manufacturability support of product design." Science intensive technologies in mechanical engineering 2020, no. 8 (2020): 18–22. http://dx.doi.org/10.30987/2223-4608-2020-8-18-22.

Full text

Abstract:

A methodical approach to the development of product design manufacturability support is presented. The approach described takes into account the stages of product life, difference in initial conditions, contradictions in the impact of one and the same characteristics of product design upon labor-intensity of different stages of product life and conditions under which the optimization for manufacturability is carried out in absolute and relative values of manufacturability.

APA, Harvard, Vancouver, ISO, and other styles

29

Russell, G. A., and B. von Turkovich. "Design for Manufacturability of Printed Circuit Board Assemblies." CIRP Annals 34, no. 1 (1985): 37–40. http://dx.doi.org/10.1016/s0007-8506(07)61718-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

TSUJIKAWA, H. "Power-Supply Noise Reduction with Design for Manufacturability." IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences E88-A, no. 12 (2005): 3421–28. http://dx.doi.org/10.1093/ietfec/e88-a.12.3421.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Segonds, Frédéric, Romain Pinquié, Romain Pinquié, Oscar Fossey, Oscar Fossey, and Frédéric Segonds. "DREAM: a design assistant for assessing additive manufacturability." International Journal of Product Lifecycle Management 14, no. 4 (2022): 328. http://dx.doi.org/10.1504/ijplm.2022.10052181.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

Pinquié, Romain, Oscar Fossey, and Frédéric Segonds. "DREAM: a design assistant for assessing additive manufacturability." International Journal of Product Lifecycle Management 14, no. 4 (2022): 328. http://dx.doi.org/10.1504/ijplm.2022.127113.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Kim, Yu-Gyeong, Yung-Jin Jung, Hyun-Soo Kim, and Hee-Jae Ahn. "Design assessment of triangular support bracket for manufacturability." Fusion Engineering and Design 98-99 (October 2015): 1519–23. http://dx.doi.org/10.1016/j.fusengdes.2015.05.004.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Thimm, G., and J. Lin. "Redimensioning parts for manufacturability: a design rewriting system." International Journal of Advanced Manufacturing Technology 26, no. 4 (2004): 399–404. http://dx.doi.org/10.1007/s00170-003-2002-6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Venkatachalam, A. R., Joseph M. Mellichamp, and David M. Miller. "A knowledge-based approach to design for manufacturability." Journal of Intelligent Manufacturing 4, no. 5 (1993): 355–66. http://dx.doi.org/10.1007/bf00123780.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Helander, Martin G. "Cognitive and sociotechnical issues in design for manufacturability." International Journal of Human Factors in Manufacturing 4, no. 4 (1994): 375–90. http://dx.doi.org/10.1002/hfm.4530040404.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Liu, Hong Jun, Rong Mo, Qing Ming Fan, Zhi Yong Chang, and Xiao Peng Li. "Research on Machinability and Evaluation Methods of Feature-Based Part under Concurrent Engineering Environment." Materials Science Forum 532-533 (December 2006): 805–8. http://dx.doi.org/10.4028/www.scientific.net/msf.532-533.805.

Full text

Abstract:

Part manufacturability under Concurrent Engineering (CE) environment was analyzed in detail. An evaluation system of Design For Manufacturing (DFM) was proposed according to CE ideas. The evaluation methods for part manufacturability feature-based are intended to present in this paper. Product design can be guided according to feedback information by evaluating the part manufacturability. Finally an example of rabbet-feature manufacturability of a turbine blade was given to show the method available and practicable.

APA, Harvard, Vancouver, ISO, and other styles

38

Das, Sanchoy, and Atipol Kanchanapiboon. "A multi-criteria model for evaluating design for manufacturability." International Journal of Production Research 49, no. 4 (2010): 1197–217. http://dx.doi.org/10.1080/00207540903505267.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Wing Chiu Tam and Shawn Blanton. "Design-for-Manufacturability Assessment for Integrated Circuits Using RADAR." IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems 33, no. 10 (2014): 1559–72. http://dx.doi.org/10.1109/tcad.2014.2336216.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

Бочкарев, Петр, Petr Bochkarev, Лариса Бокова, and Larisa Bokova. "State and directions of development in field of product design manufacturability assurance." Science intensive technologies in mechanical engineering 2018, no. 2 (2019): 37–42. http://dx.doi.org/10.30987/article_5c486cc4ba27c1.37542277.

Full text

Abstract:

A present state of approaches and procedures for the assessment of product manufacturability is considered. There are shown sources of information and regulatory-reference literature on types, indices and methods of part design optimization for manufacturability. Current directions in scientific investigations in the field of manufacturability assurance of a product design are presented.

APA, Harvard, Vancouver, ISO, and other styles

41

Atkinson, Andrews O. "Design for manufacturability: Computer-integrated design and manufacturing for plastic product development." Advances in Polymer Technology 6, no. 2 (1986): 177–84. http://dx.doi.org/10.1002/adv.1986.060060203.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Antic, Radivoje Borivoje, Slavica Cvetkovic, Branko Pejovic, and Milan Cvetkovic. "Definition of manufacturability - product of mathematical expressions and fuzzy logic for his early design." International Journal of Engineering & Technology 2, no. 3 (2013): 239. http://dx.doi.org/10.14419/ijet.v2i3.1082.

Full text

Abstract:

The paper explaines manufacturability of products for robust design of a new product. Explained mathematical expressions of fuzzy logics describe manufacturability. Provides an example of using the model for the determination of the tmanufacturability.

APA, Harvard, Vancouver, ISO, and other styles

43

Yannoulakis, N. J., S. B. Joshi, and R. A. Wysk. "Quantitative Measures of Manufacturability for Rotational Parts." Journal of Engineering for Industry 116, no. 2 (1994): 189–98. http://dx.doi.org/10.1115/1.2901930.

Full text

Abstract:

This paper addresses the issue of manufacturability measurement for design improvements. With the increasing applications of computer aided engineering, the design engineer must expand the view of design to include ease of manufacturing. Quantitative indicators of manufacturability are the most efficient way of providing manufacturing feedback to the designer. Quantitative measures can be used to indicate redesign targets and rank parts based on ease of manufacturing. A methodology for developing such indicators (manufacturability indices) is presented here, with rotational parts being used as

APA, Harvard, Vancouver, ISO, and other styles

44

Paluri, Srinivas, and John K. Gershenson. "ATTRIBUTE-BASED DESIGN DESCRIPTION SYSTEM IN DESIGN FOR MANUFACTURABILITY AND ASSEMBLY." Journal of Integrated Design and Process Science: Transactions of the SDPS, Official Journal of the Society for Design and Process Science 5, no. 2 (2001): 83–94. http://dx.doi.org/10.3233/jid-2001-5207.

Full text

Abstract:

Present computer-aided design (CAD) systems, intentionally developed as detail oriented designing tools, do not fully support the activities at the early stage of product development. CAD systems, which require a detailed level of design, prohibit the creative and free expression of a design idea. The solution to the limitations of present CAD systems is to fully utilize the graphical ability of current computer systems to represent a design with an easily understood design description in the conceptual design stage. We have developed a computerized product development tool to support designin

APA, Harvard, Vancouver, ISO, and other styles

45

Barnawal, Prashant, Michael C. Dorneich, Frank Peters, and Matthew C. Frank. "Design and Evaluation of Designer Feedback System in Design for Manufacturability." Proceedings of the Human Factors and Ergonomics Society Annual Meeting 59, no. 1 (2015): 1142–46. http://dx.doi.org/10.1177/1541931215591167.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

de Sam Lazaro, Anthony, David T. Engquist, and Dean B. Edwards. "An Intelligent Design for Manufacturability System for Sheet-metal Parts." Concurrent Engineering 1, no. 2 (1993): 117–23. http://dx.doi.org/10.1177/1063293x9300100204.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Matuszek, Józef, Tomasz Seneta, and Aleksander Moczała. "Assessment of the Design for Manufacturability Using Fuzzy Logic." Applied Sciences 10, no. 11 (2020): 3935. http://dx.doi.org/10.3390/app10113935.

Full text

Abstract:

The study proposes a procedure for assessing the designed manufacturing process for a new products. The purpose of the developed procedure is to evaluate the production process from the point of view of product design manufacturability of a unit and the small-lot production process. Evaluation of the design for the production process of a new product is based on criteria like process performance efficiency. Fuzzy logic-based methods were used to assess the designed process at different stages of its implementation—processing, assembly and organization of production. The developed method was il

APA, Harvard, Vancouver, ISO, and other styles

48

Jakubowski, Julian, and Jozef Peterka. "Design for manufacturability in virtual environment using knowledge engineering." Management and Production Engineering Review 5, no. 1 (2014): 3–10. http://dx.doi.org/10.2478/mper-2014-0001.

Full text

Abstract:

Abstract Design for manufacturing (DFM) strategies help companies to develop new products that are feasible to manufacture. In the early stages of design all engineering activities are initiated in computer aided systems. When the design is finished, the process of manufacturing and production planning begins. Issues often occur at this point because two teams, designers and manufacturers, have been working separately. The resulting question is: ‘how can Knowledge Engineering (KE) be used effectively to enhance manufacturability during early design?’ Even if the most complex geometrical produc

APA, Harvard, Vancouver, ISO, and other styles

49

Suryawan, D., and Suyitno. "Design and modeling balloon-expandable coronary stent for manufacturability." IOP Conference Series: Materials Science and Engineering 172 (February 2017): 012014. http://dx.doi.org/10.1088/1757-899x/172/1/012014.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

ISHII, Kosuke. "Design for Manufacturability and Recyclability : Extension to Product Families." Journal of the Society of Mechanical Engineers 101, no. 954 (1998): 354–56. http://dx.doi.org/10.1299/jsmemag.101.954_354.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!