Relevant bibliographies by topics / Design of cutting tool

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Design of cutting tool'

Author: Grafiati
Published: 28 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Design of cutting tool.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Design of cutting tool"

1

Tian, Xin Li, Hao Wang, Xiu Jian Tang, Zhao Li, and Ai Bing Yu. "Edge Design for Regrinding Cutting Tool." Applied Mechanics and Materials 101-102 (September 2011): 938–41. http://dx.doi.org/10.4028/www.scientific.net/amm.101-102.938.

Full text
Abstract:
Regrinding of wasted cutting tools can recycle resources and decrease manufacturing costs. Influence of relative tool sharpness and tool cutting edge angle on tool edge radius were analyzed. Cutting force and cutting temperature were simulated with FEM on different edge radius. Edge preparation experiments were carried out though an abrasive nylon brushing method. The results show that RTS and cutting edge angle have influence on edge radius. Small edge radius might result in small cutting forces and lower average temperatures, could maintain the cutting state between tool and workpiece. The c
APA, Harvard, Vancouver, ISO, and other styles
2

Novoselov, Yu A. "Automation of cutting-tool design." Russian Engineering Research 28, no. 12 (2008): 1234–40. http://dx.doi.org/10.3103/s1068798x08120174.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

R., Panchal. "Design and Analysis of Single Point Cutting Tools." Research and Reviews: Journal of Mechanical Engineering 1, no. 1 (2025): 29–34. https://doi.org/10.5281/zenodo.15235162.

Full text
Abstract:
<em>Single point cutting tools are essential in machining processes, particularly in turning operations where precision and efficiency are critical. This paper explores the design parameters of single point cutting tools, including tool geometry, material selection, and cutting-edge modifications. The study investigates the impact of rake angle, relief angle, nose radius, and tool material on cutting performance, tool wear, and surface finish. Finite element analysis (FEA) and experimental validation are employed to optimize tool design for enhanced durability and machining efficiency. The fin
APA, Harvard, Vancouver, ISO, and other styles
4

Wu, Wen Ge, Zhan Qiang Liu, and Yun Ping Cheng. "Design of the Intelligent Turning Tool System with Adjustable Tool Geometry." Key Engineering Materials 375-376 (March 2008): 681–85. http://dx.doi.org/10.4028/www.scientific.net/kem.375-376.681.

Full text
Abstract:
The tool geometry such as rake angles and cutting edge inclination angles play significant roles in determining machining performance. The task of selecting cutting tool inserts and cutting conditions is traditionally carried out on the basis of the experience of process planners with the help of data from machining handbooks and tool catalogues. This situation urges the need for development of some intelligent tooling system to reduce these inefficiencies for optimum economic and technological machining performance. A model of turning tool mechanism having the function of controllability in c
APA, Harvard, Vancouver, ISO, and other styles
5

Ostapenko, Maria, and Natalya Voronova. "Cutting tool standardization." MATEC Web of Conferences 346 (2021): 03052. http://dx.doi.org/10.1051/matecconf/202134603052.

Full text
Abstract:
The article aims to determine the role of standardization in the engineering industry and for cutting tools in general. This paper explains the basic principles of standardization. The technical committee for standardization of cutting tools (TC 95 ‘Tools’) was presented. The main directions of work and functions of TC 95 ‘Tools’ are explained. Harmonization of standards in Russia is presented on the example of ISO 13399 international standard. The work reveals positive aspects of officially translated versions of standards for enterprises. The article also describes the role of standardized t
APA, Harvard, Vancouver, ISO, and other styles
6

Xu, Dong Mei, Jinn Jong Sheu, and Bo Wen Chang. "Tool Path Design Methods for High Efficiency Die Cavity Machining with CAD/CAM Technology." Advanced Materials Research 189-193 (February 2011): 3050–55. http://dx.doi.org/10.4028/www.scientific.net/amr.189-193.3050.

Full text
Abstract:
In this research, high efficiency machining tool path design of die cavities were developed using CAD/CAM and plunge roughing technology. The algorithms of cutting tool path design for ideal and non-ideal rouging area were proposed to improve the material removal rate (MRR). The proposed tool path design methods are based on the minimum numbers of rectangular or triangular patterns to cover the roughing areas. The cutting results of the traditional Z-plane and the plunge roughing were compared to show the improvement of the cutting efficiency with the proposed methods. Design of experiments (D
APA, Harvard, Vancouver, ISO, and other styles
7

Fan, Mengchao, Chunxu Bi, Caixu Yue, Xianli Liu, and Yingnan Zhu. "Research on Double-Arc Cutting Tool Design and Cutting Performance." Applied Sciences 13, no. 6 (2023): 3689. http://dx.doi.org/10.3390/app13063689.

Full text
Abstract:
With the increasing complexity of the workpiece surfaces in aerospace and automotive molding and other areas, an increasing number of cutting tools with different shapes and performance have become necessary. A new kind of cutting tool is developed with a double-arc revolving surface at the tool’s end to improve the processing quality in numerical control milling, referred to as a double-arc cutting tool (DACT) in this paper. The parametric geometric model of the DACT is established. Three types of cutting-edge curves are proposed (a cutting edge with a constant helix angle, a cutting edge wit
APA, Harvard, Vancouver, ISO, and other styles
8

Svinin, V. M., V. A. Ushakov, A. G. Tikhonov, A. S. Pyatykh, R. V. Kononenko, and А. E. Rodygina. "Dynamometric cutting tool." iPolytech Journal 27, no. 2 (2023): 263–83. http://dx.doi.org/10.21285/1814-3520-2023-2-263-283.

Full text
Abstract:
The aim was to develop, manufacture and test a technically simple dynamometer for monitoring the cutting process during boring and turning. An S20R-SSSCR09 right-hand cutter was selected as a research object. To register the cutting force and vibration movements of the cutter tip in tangential and radial directions, the cutter was equipped with four KF5P1-10-400-A-12 strain gauges mounted according to a half-bridge scheme. The bending stiffness of the cutter in two directions was measured by a DOU-3-01 compression dynamometer and a DDP-10A dial indicator. The cutter natural frequency was deter
APA, Harvard, Vancouver, ISO, and other styles
9

Häusler, Andreas, Kim Torben Werkle, Walther Maier, and Hans-Christian Möhring. "Design of Lightweight Cutting Tools." International Journal of Automation Technology 14, no. 2 (2020): 326–35. http://dx.doi.org/10.20965/ijat.2020.p0326.

Full text
Abstract:
Taking into account the growing demand for sophisticated cutting tools in terms of their performance, new approaches, besides the development of the tool’s cutting edge, have to be investigated and validated by physical tests. In this study, methods of topology optimization and hybrid design are adopted for cutting tools. After a quick overview of its motivations, reduction of mass, the design of load paths, and beneficial functions within tool bodies, a structured method and its application on a long shell end mill for metal cutting is described as part of a holistic approach at the system an
APA, Harvard, Vancouver, ISO, and other styles
10

YAKUB, BABA AHMAD, and USMAN MOHAMMED SANUSI. "Appropriate Design Method Adopted for Single Point Cutting Tool." International Journal of Innovative Science and Research Technology 7, no. 9 (2022): 1294–300. https://doi.org/10.5281/zenodo.7184125.

Full text
Abstract:
The appropriate methodology adopted for the design of single point cutting tool is an important aspect of tool engineering. It deals with the design of tool shank, design of single point cutting tool, and various forces involved during machining of the workpiece. Selection of the appropriate material for the design of the single point cutting tool is paramount important and consideration must be put emplace.Various aspects of tooling, material cost, fabrication, manufacturing methods and the proper functioning of product should be considered. Strength and rigidity of tool is also taken into ac
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Design of cutting tool"

1

Bailey, Jesse Ian. "Cutting tool design knowledge capture & reuse." Thesis, Cranfield University, 2003. http://dspace.lib.cranfield.ac.uk/handle/1826/4434.

Full text
Abstract:
Cutting tools play an important part in today's manufacturing industry. There is an ever-increasing pressure on the cutting tool design industry to produce better quality products in response to the needs of the automotive and aerospace industries. Add to this the increasing complexity of the machined product requiring the use of non-standard cutting tools. The consideration of this area of cutting tool design is in recognition of the importance of the information and knowledge requirements at the beginning and during the design process. It has been noticed that in the cutting tool industry th
APA, Harvard, Vancouver, ISO, and other styles
2

Lawlor-Wright, Therese F. "Computer aided design of prismatic parts encompassing cutting tool selection." Thesis, University of Manchester, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.329739.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Lin, Haisheng. "The simulation and design of hard coatings for high speed cutting tool." Thesis, Nantes, 2019. http://www.theses.fr/2019NANT4087.

Full text
Abstract:
Les alliages de titane ont été largement utilisés dans les domaines de l'aéronautique, de l'automobile, et al. en raison de ses excellentes propriétés physiques et chimiques. Cependant, ce sont aussi des matériaux difficiles à couper en raison de leur résistance élevée, de leur faible conductivité thermique, de leur grande réactivité chimique, etc. L'usure rapide des outils lors de l'usinage à grande vitesse des alliages de titane entraîne une faible efficacité de production et un coût élevé. L’objectif de cette thèse est de développer le revêtement d’outil en carbure cémenté spécifique à l’us
APA, Harvard, Vancouver, ISO, and other styles
4

Milani, Mauro. "Optimization of the pressing process of triangular shaped cutting tool inserts." Thesis, Linnéuniversitetet, Institutionen för maskinteknik (MT), 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-58282.

Full text
Abstract:
Pressing of metallic powders is a manufacturing process widely investigated in the research field and in the industry. This thesis project is focused on optimizing the pressing process of cemented carbide powder utilized for the production of triangular shaped cutting tool inserts. In particular, the filling of powder into the die cavity was investigated with respect to different pressing parameters. The aim of the project was to obtain a uniform density distribution of the powder into the die cavity, and hence to reduce the variation of the height of the insert obtaining more precise dimensio
APA, Harvard, Vancouver, ISO, and other styles
5

Tsui, Kin-shing, and 徐健成. "Tool path generation for protrusion milling." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2006. http://hub.hku.hk/bib/B36891332.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Zdebski, Daniel. "The impact of tool performance on micromachining capability." Thesis, Cranfield University, 2012. http://dspace.lib.cranfield.ac.uk/handle/1826/7789.

Full text
Abstract:
Micro-milling represents a versatile and fast manufacturing process suitable for production of fully 3D micro-components. Such components are demanded for a vast number of industrial applications including safety systems, environmental sensors, personalized medical devices or micro-lenses and mirrors. The ability of micro-milling to process a wide range of materials makes it one of the best candidates to take a leading position in micromanufacturing. However, so far it does not seem to happen. By discussion with various industrialists, low predictability of micro-milling process was identified
APA, Harvard, Vancouver, ISO, and other styles
7

Bin, Che Ghani Saiful Anwar. "Design and analysis of the internally cooled smart cutting tools with the applications to adaptive machining." Thesis, Brunel University, 2013. http://bura.brunel.ac.uk/handle/2438/7687.

Full text
Abstract:
Adaptive machining with internally cooled smart cutting tools is a smart solution for industrial applications, which have stringent manufacturing requirements such as contamination free machining (CFM), high material removal rate, low tool wear and better surface integrity. The absence of cutting fluid in CFM causes the cutting tool and the workpiece subject to great thermal loads owing to higher friction and adhesion, and as a result may increase the levels of tool wear drastically. The increase in cutting temperature may influence the chip morphology which in return producing metal chips in
APA, Harvard, Vancouver, ISO, and other styles
8

Chen, Xun. "A multi-physics-based approach to design of the smart cutting tool and its implementation and application perspectives." Thesis, Brunel University, 2016. http://bura.brunel.ac.uk/handle/2438/12841.

Full text
Abstract:
This thesis presents a multi-physics-based approach to the design and analysis of smart cutting tools for emerging industrial requirements, within an innovative design process. The design process is in stages according to design specifications and requires analysis, conceptual design, detailed design, prototype production and service testing. The research presented in the thesis follows the design process but focuses on the detailed design of the smart turning tool, including mechanical design, electrical wiring and sensor circuitry, embedded algorithms development, and multi-physics-based sim
APA, Harvard, Vancouver, ISO, and other styles
9

Brlica, Vlastimil. "Technologické aspekty nástrojů pro obrábění dřeva." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229130.

Full text
Abstract:
The fully fashioned master’s thesis within the frame of the master’s study at the Fakulty of mechanical engineering deals with subject woodworking tools. There are characteristics of wood and tool materials used for woodworking. There is an emphasis on milling cutter in each case of construction of selected woodworking tools. Whereas there is concrete proposal of milling cutter used for production of half round profile – half round concave cutter – at the end of the thesis.
APA, Harvard, Vancouver, ISO, and other styles
10

Zhao, Yue. "The integration of CAD and a knowledge based cutting tools selection system." Thesis, University of Sheffield, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.267191.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Design of cutting tool"

1

Ranganath, B. J. Metal cutting and tool design. Vikas Publishing, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Pollack, Herman W. Tool design. 2nd ed. Prentice-Hall, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

T, Reid David, and Society of Manufacturing Engineers, eds. Fundamentals of tool design. 3rd ed. Society of Manufacturing Engineers, Publications Development Department, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Gegg, Brandon C. Machine tool vibrations and cutting dynamics. Springer, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Radzevich, Stephen P., and Michael Storchak, eds. Advances in Gear Theory and Gear Cutting Tool Design. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-92262-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Radzevich, S. P. Gear cutting tools: Fundamentals of design and computation. CRC Press, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

B, Protasʹev V., та Tulʹskiĭ politekhnicheskiĭ institut, ред. Issledovanii͡a︡ v oblasti instrumentalʹnogo proizvodstva i obrabotki metallov rezaniem: Sbornik nauchnykh rabot. Tulʹskiĭ politekhnicheskiĭ in-t, 1991.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

L, Frumin I͡U. Kompleksnoe proektirovanie instrumentalʹnoĭ osnastki. "Mashinostroenie", 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

I͡Ulikov, M. I. Proektirovanie i proizvodstvo rezhushchego instrumenta. "Mashinostroenie", 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Nieszporek, Tadeusz. Automatyzacja projektowania zarysów frezów ślimakowych. Wydawn. Poznańskiego Towarzystwa Przyjaciół Nauk, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Design of cutting tool"

1

Bailey, J., R. Roy, R. Harris, and A. Tanner. "Cutting Tool Design Knowledge Capture." In Industrial Knowledge Management. Springer London, 2001. http://dx.doi.org/10.1007/978-1-4471-0351-6_25.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Aspinwall, D. K., M. Tunstall, and R. Hammerton. "Cutting Tool Life Comparisons." In Proceedings of the Twenty-Fifth International Machine Tool Design and Research Conference. Macmillan Education UK, 1985. http://dx.doi.org/10.1007/978-1-349-07529-4_31.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Salem, Amr, Hussien Hegab, and Hossam A. Kishawy. "Environmental Assessment and Optimization When Machining with Micro-textured Cutting Tools." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-28839-5_41.

Full text
Abstract:
AbstractThe dry machining strategy has recently received high attention in the field of metal cutting as it can eliminate the environmental impacts associated with the usage of cutting fluids. However, high-generated heat and severe tool wear are usually observed for the dry machining operations. One of the suggested techniques to improve the dry machining performance is to utilize the textured cutting tools, reducing the friction at the chip-tool interface. In this study, three different micro-textured tool designs were used during the machining AISI 1045 at different cutting conditions. A li
APA, Harvard, Vancouver, ISO, and other styles
4

Zak, Eva Iszoro, and Julian Roberts. "Abstract pattern cutting as a design tool: Accidental Cutting and Subtraction Cutting methodologies." In The Routledge Companion to Fashion Studies. Routledge, 2021. http://dx.doi.org/10.4324/9780429264405-10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Radzevich, Stephen P. "Brief Notes on the History of Methods of Machining Gears and of Design of Gear Cutting Tool 1." In Gear Cutting Tools. CRC Press, 2017. http://dx.doi.org/10.1201/b22164-1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Sun, Pei-lu, Ping-yu Jiang, and Kai Ding. "Research on a Cutting-Tool Service Design Method." In Proceedings of the 22nd International Conference on Industrial Engineering and Engineering Management 2015. Atlantis Press, 2016. http://dx.doi.org/10.2991/978-94-6239-180-2_31.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Shi, Hanmin. "The Constraint Conditions for Free-Cutting Tool Design." In Springer Series in Advanced Manufacturing. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-73561-0_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Straka, Róbert, and Jozef Peterka. "Investigation of Machined Surface Roughness and Cutting Tool Wear from Prepared Tool Geometry." In Machine and Industrial Design in Mechanical Engineering. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-88465-9_25.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Pasternak, Sergii, Yurii M. Danylchenko, Michael Storchak, and Oleksandr A. Okhrimenko. "Gear Cutting with Disk-Shaped Milling Cutters." In Advances in Gear Theory and Gear Cutting Tool Design. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-92262-7_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Laheurte, R., P. Darnis, and O. Cahuc. "Energy Assessment and Cutting Tool Behavior in Machining." In Recent Advances in Integrated Design and Manufacturing in Mechanical Engineering. Springer Netherlands, 2003. http://dx.doi.org/10.1007/978-94-017-0161-7_28.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Design of cutting tool"

1

Roy, R., J. I. Bailey, and R. G. L. Hodges. "Development of a Design Reuse View of Cutting Tool Design Ontology." In ASME 2003 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2003. http://dx.doi.org/10.1115/detc2003/dac-48738.

Full text
Abstract:
Knowledge attrition in the cutting tool industry can be mitigated and also the efficiency of the design process can be improved if past design solutions, which are the embodiment of rich expert knowledge, are made easily accessible to the designer for reuse. An effort is underway to realize this desirable situation at Widia Valenite, a company concerned with the design and manufacture of cutting tools. An ontology of cutting tool design exists, however this ontology is too detailed for designers who want quick access to past designs to satisfy new design problems. The potential of this ontolog
APA, Harvard, Vancouver, ISO, and other styles
2

Vosniakos, G. C., A. Daskalopoulos, and N. Straggas. "A Web-Based Integrated Cutting Tool Management System." In ASME 7th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2004. http://dx.doi.org/10.1115/esda2004-58421.

Full text
Abstract:
Tool management functions cover tool system elements for assembly, operating conditions for process planning and NC programming, tuning operation execution on the machine, calculation of remaining tool life for planning tool changes, number of tools in stock, supplier terms for ordering and average utilization of tools over time for production planning. A database system was constructed catering for network access by being written as a web application. The system’s practical use is demonstrated by several typical scenarios of use.
APA, Harvard, Vancouver, ISO, and other styles
3

Rahim, W. M. Faizal W. A., A. F. M. Shahrizad, C. Y. Khor, et al. "Turbulent coolant inside cutting tool to control heat transfer during cutting process." In GREEN DESIGN AND MANUFACTURE: ADVANCED AND EMERGING APPLICATIONS: Proceedings of the 4th International Conference on Green Design and Manufacture 2018. Author(s), 2018. http://dx.doi.org/10.1063/1.5066771.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Brechner, Eric L. "General Tool Offset Curves and Surfaces." In ASME 1990 Design Technical Conferences. American Society of Mechanical Engineers, 1990. http://dx.doi.org/10.1115/detc1990-0033.

Full text
Abstract:
Abstract Offset curves and surfaces are often used to define two- and three-axis tool paths for circular and spherical cutting tools. This paper derives extensions of these curves and surfaces that can define tool paths for general cutting tool shapes. The general tool offsets are based on a study of mathematical envelopes of arbitrary smooth “structuring” surfaces centered on an arbitrary differentiable “foundation” surface. When a part is used for the foundation surface and a cutting tool is used for the structuring surface then the envelope forms a general tool offset. Explicit parameteriza
APA, Harvard, Vancouver, ISO, and other styles
5

Stépán, Gábor, and Tamas Kalmar-Nagy. "Nonlinear Regenerative Machine Tool Vibrations." In ASME 1997 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/detc97/vib-4021.

Full text
Abstract:
Abstract The existence and the nature of the Hopf bifurcation is presented in the delay-differential equation model of the so-called regenerative machine tool vibration. The relevant nonlinearity is considered at the cutting force dependence on the chip thickness. The delayed terms show a special algebraic structure in the nonlinear part of the equation of motion. This results in a surprisingly simple and useful analytical formula in the end of the lengthy calculation based on center manifold reduction in the corresponding infinite dimensional phase space. The result gives a simple way to esti
APA, Harvard, Vancouver, ISO, and other styles
6

Sahay, C., and R. N. Dubey. "On Tool Instability During Machining." In ASME 1991 Design Technical Conferences. American Society of Mechanical Engineers, 1991. http://dx.doi.org/10.1115/detc1991-0335.

Full text
Abstract:
Abstract The present paper describes the role of the tool in vibrations of a machining system. The cutting force has been assumed to be constant. The shear deformation of the tool is considered. The quasi-static analysis of the situation yields a maximum allowable uncut chip thickness, which shows how the frictional interaction at the tool face and the ratio of the components of cutting forces alter this value. The relationship also expresses the effect of tool dimensions and work material on the vibration of the tool.
APA, Harvard, Vancouver, ISO, and other styles
7

Li Yan, Yuan Qilong, Yang Mingshun, and Zheng Jianming. "Tool design of fin-tube cutting-press shaping." In 2010 International Conference on Mechanic Automation and Control Engineering (MACE). IEEE, 2010. http://dx.doi.org/10.1109/mace.2010.5535525.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Efendi, Adhan, Muhammad Ridho Albab, Ferdi Fathurohman, Nurul Mukminah, and C. Bambang Dwi Kuncoro. "Design of pneumatic tofu pressing and cutting tool." In THE 17TH INTERNATIONAL CONFERENCE ON QUALITY IN RESEARCH (QIR) 2021 IN CONJUNCTION WITH THE 6TH ITREC 2021 AND THE 2ND CAIC-SIUD. AIP Publishing, 2024. http://dx.doi.org/10.1063/5.0143959.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Dassanayake, Achala V., and C. Steve Suh. "Impact of Tool Geometry on Cutting Dynamics." In ASME 2007 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/detc2007-35472.

Full text
Abstract:
Machining stability in response to changing tool geometry is studied using a 3D turning model that considers coupled tool-workpiece dynamics subject to nonlinear regenerative cutting forces [1]. As tool geometry varies with the specified tool angles, values of tool rake angle, side cutting edge angle, and inclination angle are considered in the study as the controlled parameters. In the presented model, cutting force components in the X, Y, and Z directions vary with the variations of tool geometry, thus resulting in changes in cutting dynamics — a major feature not attainable using 1D models.
APA, Harvard, Vancouver, ISO, and other styles
10

Ozturk, Ozkan, and Erhan Budak. "Modeling of Broaching Process for Improved Tool Design." In ASME 2003 International Mechanical Engineering Congress and Exposition. ASMEDC, 2003. http://dx.doi.org/10.1115/imece2003-42304.

Full text
Abstract:
High productivity and high quality can be achieved in broaching if the process is applied properly. Roughing, semifinishing and finishing can be performed in one stroke of the tool increasing productivity and reducing set-up time. Furthermore, high quality surface finish can be obtained due to straight motion of the tool. One big disadvantage of broaching is that all process parameters, except cutting speed, are built into broaching tools. Therefore, it is not possible to modify cutting conditions during the process once the tool is manufactured. Improved design of broaching tools needs detail
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Design of cutting tool"

1

Chang, Michael Alan, Alejandra Magana, Bedrich Benes, Dominic Kao, and Judith Fusco. Driving Interdisciplinary Collaboration through Adapted Conjecture Mapping: A Case Study with the PECAS Mediator. Digital Promise, 2022. http://dx.doi.org/10.51388/20.500.12265/156.

Full text
Abstract:
In this report, we demonstrate how an interdisciplinary team of computer science and learning sciences researchers utilize an adapted conjecture mapping tool during a collaborative problem-solving session. The session is documented through an edited “Dialogue” format, which captures the process of conjecture map construction and subsequent reflection. We find that creating the conjecture map collaboratively surfaces a key tension: while learning sciences theory often highlights the nuanced and complex relational nature of learning, even the most cutting-edge computing techniques struggle to di
APA, Harvard, Vancouver, ISO, and other styles
2

Robinson, Sam, Peter Blau, and Robert Lacombe. Coated Cutting Tool Insert Development. Office of Scientific and Technical Information (OSTI), 1997. http://dx.doi.org/10.2172/770389.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

McManigle, A. P. Cutting tool study: 21-6-9 stainless steel. Office of Scientific and Technical Information (OSTI), 1992. http://dx.doi.org/10.2172/7273296.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

McManigle, A. P. Cutting tool study: 21-6-9 stainless steel. Office of Scientific and Technical Information (OSTI), 1992. http://dx.doi.org/10.2172/10177994.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Rice, Gordon. Selection and Implementation of a Replacement Cutting Tool Selection Application. Office of Scientific and Technical Information (OSTI), 2008. http://dx.doi.org/10.2172/952470.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kistler, B. L. Finite element analyses of tool stresses in metal cutting processes. Office of Scientific and Technical Information (OSTI), 1997. http://dx.doi.org/10.2172/477614.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

McCullouch, Bob, and Walter Land. Design Mentoring Tool. Purdue University, 2011. http://dx.doi.org/10.5703/1288284314243.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Baral, Aniruddha, Jeffrey Roesler, M. Ley, et al. High-volume Fly Ash Concrete for Pavements Findings: Volume 1. Illinois Center for Transportation, 2021. http://dx.doi.org/10.36501/0197-9191/21-030.

Full text
Abstract:
High-volume fly ash concrete (HVFAC) has improved durability and sustainability properties at a lower cost than conventional concrete, but its early-age properties like strength gain, setting time, and air entrainment can present challenges for application to concrete pavements. This research report helps with the implementation of HVFAC for pavement applications by providing guidelines for HVFAC mix design, testing protocols, and new tools for better quality control of HVFAC properties. Calorimeter tests were performed to evaluate the effects of fly ash sources, cement–fly ash interactions, c
APA, Harvard, Vancouver, ISO, and other styles
9

Graham, Mark W. Tool and Fixture Design. Office of Scientific and Technical Information (OSTI), 2015. http://dx.doi.org/10.2172/1210202.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Yang, Chi, and Devin Bowers. Hydrodynamic Design Optimization Tool. Defense Technical Information Center, 2011. http://dx.doi.org/10.21236/ada558944.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Design of cutting tool' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography