Log in

Relevant bibliographies by topics / Design of cutting tool / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Design of cutting tool.

Dissertations / Theses on the topic 'Design of cutting tool'

Author: Grafiati

Published: 28 May 2022

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'Design of cutting tool.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Bailey, Jesse Ian. "Cutting tool design knowledge capture & reuse." Thesis, Cranfield University, 2003. http://dspace.lib.cranfield.ac.uk/handle/1826/4434.

Full text

Abstract:

Cutting tools play an important part in today's manufacturing industry. There is an ever-increasing pressure on the cutting tool design industry to produce better quality products in response to the needs of the automotive and aerospace industries. Add to this the increasing complexity of the machined product requiring the use of non-standard cutting tools. The consideration of this area of cutting tool design is in recognition of the importance of the information and knowledge requirements at the beginning and during the design process. It has been noticed that in the cutting tool industry th

APA, Harvard, Vancouver, ISO, and other styles

2

Lawlor-Wright, Therese F. "Computer aided design of prismatic parts encompassing cutting tool selection." Thesis, University of Manchester, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.329739.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Lin, Haisheng. "The simulation and design of hard coatings for high speed cutting tool." Thesis, Nantes, 2019. http://www.theses.fr/2019NANT4087.

Full text

Abstract:

Les alliages de titane ont été largement utilisés dans les domaines de l'aéronautique, de l'automobile, et al. en raison de ses excellentes propriétés physiques et chimiques. Cependant, ce sont aussi des matériaux difficiles à couper en raison de leur résistance élevée, de leur faible conductivité thermique, de leur grande réactivité chimique, etc. L'usure rapide des outils lors de l'usinage à grande vitesse des alliages de titane entraîne une faible efficacité de production et un coût élevé. L’objectif de cette thèse est de développer le revêtement d’outil en carbure cémenté spécifique à l’us

APA, Harvard, Vancouver, ISO, and other styles

4

Milani, Mauro. "Optimization of the pressing process of triangular shaped cutting tool inserts." Thesis, Linnéuniversitetet, Institutionen för maskinteknik (MT), 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-58282.

Full text

Abstract:

Pressing of metallic powders is a manufacturing process widely investigated in the research field and in the industry. This thesis project is focused on optimizing the pressing process of cemented carbide powder utilized for the production of triangular shaped cutting tool inserts. In particular, the filling of powder into the die cavity was investigated with respect to different pressing parameters. The aim of the project was to obtain a uniform density distribution of the powder into the die cavity, and hence to reduce the variation of the height of the insert obtaining more precise dimensio

APA, Harvard, Vancouver, ISO, and other styles

5

Tsui, Kin-shing, and 徐健成. "Tool path generation for protrusion milling." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2006. http://hub.hku.hk/bib/B36891332.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Zdebski, Daniel. "The impact of tool performance on micromachining capability." Thesis, Cranfield University, 2012. http://dspace.lib.cranfield.ac.uk/handle/1826/7789.

Full text

Abstract:

Micro-milling represents a versatile and fast manufacturing process suitable for production of fully 3D micro-components. Such components are demanded for a vast number of industrial applications including safety systems, environmental sensors, personalized medical devices or micro-lenses and mirrors. The ability of micro-milling to process a wide range of materials makes it one of the best candidates to take a leading position in micromanufacturing. However, so far it does not seem to happen. By discussion with various industrialists, low predictability of micro-milling process was identified

APA, Harvard, Vancouver, ISO, and other styles

7

Bin, Che Ghani Saiful Anwar. "Design and analysis of the internally cooled smart cutting tools with the applications to adaptive machining." Thesis, Brunel University, 2013. http://bura.brunel.ac.uk/handle/2438/7687.

Full text

Abstract:

Adaptive machining with internally cooled smart cutting tools is a smart solution for industrial applications, which have stringent manufacturing requirements such as contamination free machining (CFM), high material removal rate, low tool wear and better surface integrity. The absence of cutting fluid in CFM causes the cutting tool and the workpiece subject to great thermal loads owing to higher friction and adhesion, and as a result may increase the levels of tool wear drastically. The increase in cutting temperature may influence the chip morphology which in return producing metal chips in

APA, Harvard, Vancouver, ISO, and other styles

8

Chen, Xun. "A multi-physics-based approach to design of the smart cutting tool and its implementation and application perspectives." Thesis, Brunel University, 2016. http://bura.brunel.ac.uk/handle/2438/12841.

Full text

Abstract:

This thesis presents a multi-physics-based approach to the design and analysis of smart cutting tools for emerging industrial requirements, within an innovative design process. The design process is in stages according to design specifications and requires analysis, conceptual design, detailed design, prototype production and service testing. The research presented in the thesis follows the design process but focuses on the detailed design of the smart turning tool, including mechanical design, electrical wiring and sensor circuitry, embedded algorithms development, and multi-physics-based sim

APA, Harvard, Vancouver, ISO, and other styles

9

Brlica, Vlastimil. "Technologické aspekty nástrojů pro obrábění dřeva." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229130.

Full text

Abstract:

The fully fashioned master’s thesis within the frame of the master’s study at the Fakulty of mechanical engineering deals with subject woodworking tools. There are characteristics of wood and tool materials used for woodworking. There is an emphasis on milling cutter in each case of construction of selected woodworking tools. Whereas there is concrete proposal of milling cutter used for production of half round profile – half round concave cutter – at the end of the thesis.

APA, Harvard, Vancouver, ISO, and other styles

10

Zhao, Yue. "The integration of CAD and a knowledge based cutting tools selection system." Thesis, University of Sheffield, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.267191.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Atmadi, Alexander. "Cutting fluid aerosol from splash in turning : analysis for environmentally conscious machining." Thesis, Georgia Institute of Technology, 2000. http://hdl.handle.net/1853/19603.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Remeš, David. "Účel designu u ručního nářadí." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-379017.

Full text

Abstract:

This thesis deals with the effect of the design on hand tools. In the first theoretical part of this thesis, individual manual operations carried out during manufacturing are being further analyzed. The next part then focuses on the individual aspects of the product design and its influence on the hand tools. Followed by the processing of achieved parameters in handwork. The experimental part of this thesis deals with adjustments of the tap wrench´s handles made for manual cutting of internal threads. The utilization of the material when selecting a semi-finished product from blanks as well as

APA, Harvard, Vancouver, ISO, and other styles

13

Волошко, О. В., та С. П. Вислоух. "Методика визначення оброблюваності конструкційних матеріалів "неруйнівними" методами". Thesis, Видавництво СумДУ, 2010. http://essuir.sumdu.edu.ua/handle/123456789/11278.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Werner, P. O. E. Mathias. "Investigation on HSS milling inserts : cutting edge and surface preparation effect on machinability : the capturing, understanding and structure of the gear manufacturing processes may lead to a dynamic link to design aspects such that more effective and reliable cutting tool system development is acheived /." Stockholm : Industriell teknik och management, Kungliga Tekniska högskolan, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-9942.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Morandeau, Antoine. "Méthodologie de caractérisation et de conception d'un outil coupant à plaquettes amovibles pour l'usinage de matériaux composites aéronautiques : Application aux opérations de surfaçage." Thesis, Tours, 2012. http://www.theses.fr/2012TOUR4041/document.

Full text

Abstract:

Les composites utilisés dans l'industrie aéronautique sont hétérogènes. Ils sont composés d'une matrice polymère souple et ductile et d'un renfort dur et fragile. Les différentes phases ainsi que l'anisotropie du matériau peuvent rendre l'usinage de ces matières, difficile. Deux problèmes majeurs peuvent être rencontrés lors de l'usinage : garder l'intégrité de la matière usinée et réduire l'usure de l'outil de coupe. Les niveaux de qualité demandés dans le secteur aéronautique imposent une coupe sans défaut, ces derniers pouvant entrainer une altération ultérieure de la pièce. Les principaux

APA, Harvard, Vancouver, ISO, and other styles

16

Aytekin, Kasim. "Characterization of machinability in lead-free brass alloys." Thesis, KTH, Materialvetenskap, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-240107.

Full text

Abstract:

Ny lagstiftning har lagt fokus på den tociska naturen av bly som legeringselement I mässingsprodukter. Vattenförsörjningssystem är av största oro där misstänkt blyläckage från mässingsprodukter hotar människors hälsa, världen över. Denna studie har utförts i syfte att karaktärisera bearbetbarheten av blyfria mässingslegeringar för att förse industrin med nödvändig information och underlätta att ersätta dagens blyade alternativ. Karaktäriseringen har fokuserat på två specifika bearbetningsprocesser, nämligen svarvning och borrning där intresset har legat hos skärkraftsgenerering och spånbildnin

APA, Harvard, Vancouver, ISO, and other styles

17

Malmborg, Malin, and Magnolia Tibaduiza. "Skäreggprepareringens påverkan på slitage hos hårdmetallborrar : En fallstudie enligt DMAIC på Scania Motorbearbetning." Thesis, Luleå tekniska universitet, Institutionen för ekonomi, teknik och samhälle, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-79899.

Full text

Abstract:

Den ökande efterfrågan på högre produktkvalitet inom tillverkningsindustrin kräver hög stabilitet och lång livslängd på borrverktyg under borrningbearbetningsprocessen. En metod för att öka produktkvaliteten och därmed förlänga livslängden på borrverktyg är skäreggpreparering. Skäreggpreparering används för att skapa en kantgeometri som ger borrverktyget både en bättre styrka och högre tålighet mot slitage. Det mest förekommande slitaget på borrverktyg är fasförslitning och det utvecklas snabbt under den initiala slitningsperioden under borrens livslängd. Syftet med det här examensarbetet var

APA, Harvard, Vancouver, ISO, and other styles

18

Medvedeva, Anna. "Performance of advanced tool steels for cutting tool bodies." Doctoral thesis, Karlstads universitet, Avdelningen för maskin- och materialteknik, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-5630.

Full text

Abstract:

Performance of indexable insert cutting tools is not only about the performance of cutting inserts. It is also about the cutting tool body, which has to provide a secure and accurate insert positioning as well as its quick and easy handling under severe working conditions. The common damage mechanisms of cutting tool bodies are fatigue and plastic deformation. Cutting tools undergo high dynamic stresses going in and out cutting engagement; as a result, an adequate level of fatigue strength is the essential steel property. Working temperatures of tool bodies in the insert pocket can reach up to

APA, Harvard, Vancouver, ISO, and other styles

19

Aitchison, David Robert. "Laser based cutting tool condition monitoring." Thesis, University of Hull, 1995. http://hydra.hull.ac.uk/resources/hull:3693.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Werda, Ben Slima Sana. "Influence de la conception d'un outil de fraisage dédié à la microlubrification (MQL) sur l'interaction outil-matière-lubrifiant : études expérimentales et numériques." Thesis, Tours, 2016. http://www.theses.fr/2016TOUR4030/document.

Full text

Abstract:

Dans l’industrie, les fabricants tendent à limiter la lubrification conventionnelle lors de l’usinage et s’orientent de plus en plus vers la microlubrification (MQL : Minimum Quantity Lubrication) pour des raisons économiques, écologiques et pour respecter la santé des opérateurs. Une très faible quantité de lubrifiant de faible pression nécessite une conception optimale des canaux internes de l’outil afin de limiter les pertes de charges et avoir les avantages de la microlubrification. Premièrement, une revue bibliographique introduit l’étude en présentant les avantages qu’induit le passage à

APA, Harvard, Vancouver, ISO, and other styles

21

Jaberansari, Mohsen. "The effect of cutting tool micro-geometry on tool life." Thesis, University of Salford, 1990. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.303041.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Mahvash, Mohammadi Mohsen. "Haptic rendering of tool contact and cutting." Thesis, McGill University, 2002. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=38501.

Full text

Abstract:

A haptic display is capable of representing the virtual interaction between a tool and a deformable body in order to simulate the contact between them. This capability requires computations to be performed in real time in order to generate the force of the virtual interaction that closely resembles the force applied to the tool during actual mechanical interaction. Reasonable approximations must be made to make this possible.<br>This thesis presents an algorithm for real time calculation of tool force-displacement response of contact interaction with a deformable body, during which the body is

APA, Harvard, Vancouver, ISO, and other styles

23

Brinnen, Mikael, and Gustaf Laggar. "New Cutting Tool Concept For Cylinder Boring." Thesis, Uppsala universitet, Mikrosystemteknik, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-301768.

Full text

Abstract:

This thesis describes the process and result of generating concepts for a new adjustable cutting tool with integrated components. It was conducted under a period of ten weeks at the department R&D Digital Machining at Sandvik Coromant, Sandviken. The focus of the thesis was to generate and evaluate different concepts using well known methods such as TRIZ Contradiction and 40 principles, SCAMPER, Wish and Wonder, Brainstorming, Weight Determination matrix and Pugh matrix. To catch up on the latest technologies and similar tools in the industry today a literature study was conducted which r

APA, Harvard, Vancouver, ISO, and other styles

24

Mussa, Abdulbaset. "Wear characterization and wear mapping of a coated cutting tool : Development of cutting tool test fixture and wear testing." Thesis, Karlstads universitet, Science, Mathematics and Engineering Education Research (SMEER), 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-37790.

Full text

Abstract:

Wear mechanisms of the cutting tools are well investigated worldwide. Usually researchers use the cutting process itself, turning by single point cutting, as their investigation method, which includes turning a metal cylinder with a pre-selected work-material and predetermined cutting conditions. Thereafter the tool worn surface is examined by scanning electron microscopy in order to characterize the tool wear mechanisms and tool failure. However, this may be the most appropriate way to investigate the wear mechanisms which occur during machining since it simulates the real operation. Metal cu

APA, Harvard, Vancouver, ISO, and other styles

25

Нагорний, Володимир В`ячеславович, Владимир Вячеславович Нагорный, and Volodymyr Viacheslavovych Nahornyi. "Diagnosis of cutting tool by the sound that accompanies the process of cutting." Thesis, Сумський державний університет, 2013. http://essuir.sumdu.edu.ua/handle/123456789/33557.

Full text

Abstract:

Typical defects of a tool is wear and peeling of tool blade. These defects must be detected in proper time to replace the tool immediately. One of the diagnostic signs of these defects is the sound level which accompanies the cutting process. When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/33557

APA, Harvard, Vancouver, ISO, and other styles

26

Sripathi, Prajwal Swamy Payton Lewis Nathaniel. "Investigation into the effects of tool geometry and metal working fluids on tool forces and tool surfaces during orthogonal tube turning of aluminum 6061 alloy." Auburn, Ala., 2009. http://hdl.handle.net/10415/1963.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Hammarström, (Gimleström) Dag. "Konstruktion av ett kapningsverktyg för pappersreglar." Thesis, Karlstads universitet, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-78669.

Full text

Abstract:

Start-up företaget Wood Tube har utvecklat en ny typ av miljövänlig byggregel gjord av papper. Pappersreglar är en ny produkt som ännu inte finns på marknaden, men som kan komma att innebära stora fördelar för byggindustrin och snickare i fråga om pris, miljövänlighet och förbättrad arbetsmiljö. Det tänkta användningsområdet är att ersätta plåtreglar som ram i icke-bärande innerväggar, men det finns även stor potential i andra applikationer, såsom i möbler. Pappersreglarna tillverkas i standardlängder och ska kapas på plats ute på det aktuella bygget, i dagsläget genom sågning. Detta projekt

APA, Harvard, Vancouver, ISO, and other styles

28

Enparantza, Rafael. "Tool selection and cutting conditions optimisation in milling." Thesis, University of Manchester, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.261551.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Odelros, Stina. "Tool wear in titanium machining." Thesis, Uppsala universitet, Institutionen för kemi - Ångström, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-176944.

Full text

Abstract:

The present work was performed at AB Sandvik Coromant as a part in improving the knowledge and understanding about wear of uncoated WC/Co cutting tools during turning of titanium alloy Ti-6Al-4V. When machining titanium alloys, or any other material, wear of the cutting tools has a huge impact on the ability to shape the material as well as the manufacturing cost of the finished product. Due to the low thermal conductivity of titanium, high cutting temperatures will occur in narrow regions near the cutting edge during machining. This will result in high reaction and diffusion rates, resulting

APA, Harvard, Vancouver, ISO, and other styles

30

Іванов, Віталій Олександрович, Виталий Александрович Иванов, Vitalii Oleksandrovych Ivanov та ін. "Технологічний аналіз заготовки при автоматизованому проектуванні верстатних пристроїв". Thesis, Сумський державний університет, 2017. http://essuir.sumdu.edu.ua/handle/123456789/66571.

Full text

Abstract:

Розроблення та впровадження систем автоматизованого проектування верстатних пристроїв (CAFD-системи), які дозволяють у автоматизованому режимі проектувати верстатні пристрої (ВП), оцінювати їх ефективність та розробляти необхідну документацію, є одним із перспективних напрямків інтенсифікації конструкторсько-технологічної підготовки виробництва. Процес проектування ВП складається з трьох етапів: технологічного аналізу об’єкту обробки; синтезу конкуруючих варіантів та оптимізації компонувань ВП; інженерно-виробничого аналізу.

APA, Harvard, Vancouver, ISO, and other styles

31

Bain, Joseph David. "Thermomechanical Hot Tool Cutting and Surface Quality in Robotic Foam Sculpting." Thesis, University of Canterbury. Mechanical Engineering, 2011. http://hdl.handle.net/10092/6258.

Full text

Abstract:

For several years, research work has been carried out at the University of Canterbury aimed at the development of a rapid prototyping and manufacturing process referred to as Robotic Foam Sculpting (RFS). This system uses a six-axis industrial robot and electrically-heated hot-wire and hot-blade tools to sculpt desired parts from blocks of polystyrene foam. The vision for this system is that it will be able to rapidly create large volume foam models at low cost, for a range of potential applications. Parts produced by the RFS system can potentially be used as investment casting patterns, cores

APA, Harvard, Vancouver, ISO, and other styles

32

Whittle, Neville C. "Titanium nitrate coated high speed steel cutting tool inserts." Thesis, Loughborough University, 1987. https://dspace.lboro.ac.uk/2134/10850.

Full text

Abstract:

A detailed study has been made of commercially produced, powder metallurgy, BT42 grade high speed steel (H.S.S.) indexable cutting tool inserts coated with a thin layer of titanium nitride (TiN) by chemical vapour deposition (C.V.D.). The characteristics of the coating before and after the obligatory substrate heat treatment were first ascertained using various techniques including X-ray diffraction, Auger electron spectroscopy, fractography, scanning and transmission electron microscopy, microhardness testing, profilometry, optical microscopy and scratch-adhesion testing. It was found that th

APA, Harvard, Vancouver, ISO, and other styles

33

Lewis, Paul Robert. "Cutting data for automated turning tool selection in industry." Thesis, Durham University, 1996. http://etheses.dur.ac.uk/5240/.

Full text

Abstract:

This thesis is concerned with the determination of cutting parameters (cutting speed, feed rate and depth of cut) in turning operations within an industrial environment. The parameters are required for the purposes of tool selection, working with a variety of batches of different materials. Previous work of this nature, little of which has been transferred into industry, has concentrated primarily on deriving optimum cutting conditions, based on a variety of deterministic and non- deterministic approaches, with a general reliance on experimentally-derived input variables. However, this work is

APA, Harvard, Vancouver, ISO, and other styles

34

Watmon, Titus. "The performance characteristics of a surface-modified cutting tool." Thesis, University of East London, 2013. http://roar.uel.ac.uk/4015/.

Full text

Abstract:

In the past, many papers have been presented which show that the coating of cutting tools often yields decreased wear rates and reduced coefficients of friction. Although different theories are proposed, covering areas such as hardness theory, diffusion barrier theory, thermal barrier theory, and reduced friction theory, most have not dealt with the question of how and why the coating of tool substrates with hard materials such as Titanium Nitride (TiN), Titanium Carbide (TiC) and Aluminium Oxide (Al203) transforms the performance and life of cutting tools. This project discusses the complex i

APA, Harvard, Vancouver, ISO, and other styles

35

Dessoly, Vincent. "Modeling and Verification of Cutting Tool Temperatures in Rotary Tool Turning of Hardened Steel." Thesis, Georgia Institute of Technology, 2004. http://hdl.handle.net/1853/5155.

Full text

Abstract:

The chip formation process in machining is accompanied by heat generation. The heat generated influences both the workpiece physical properties as well as the cutting tool. High temperatures accelerate tool wear and thermal softening which are not desirable because they alter the accuracy of the machined surface and tool life. Many studies have been done to lower the heat generated in cutting. A first approach is to use a cutting fluid but its effectiveness is limited by its ability to penetrate between the tool and the chip. A second approach is to remove the heat generated through a cooling

APA, Harvard, Vancouver, ISO, and other styles

36

Vagnorius, Žydrunas. "Reliability of metal cutting tools: : Stochastic tool life modelling and optimization of tool replacement time." Doctoral thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for produksjons- og kvalitetsteknikk, 2010. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-11293.

Full text

Abstract:

This PhD thesis is based on six articles and proposes new approaches for modelling of the life of cutting tools and for determining the optimal tool replacement time. These issues are very closely related and play a critical role in machining economics. Replacing a tool too early means wasting of its potential and leads to high costs and reduced productivity. Late replacement poses a risk of wear-out and other types of tool failures, which can damage the component being produced and can cause expensive equipment downtimes. Therefore a lot of work has been done to develop models for predicting

APA, Harvard, Vancouver, ISO, and other styles

37

Reeswinkel, Thomas [Verfasser]. "Self-lubricious tool coatings for ecological metal cutting / Thomas Reeswinkel." Aachen : Shaker, 2012. http://d-nb.info/1069046663/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Dawson, Ty Grant. "Effects of cutting parameters and tool wear in hard turning." Thesis, Georgia Institute of Technology, 1999. http://hdl.handle.net/1853/17816.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Zheng, Kougen. "Application of the Wigner distribution to monitoring cutting tool condition." Thesis, University of Warwick, 1992. http://wrap.warwick.ac.uk/56557/.

Full text

Abstract:

This thesis is about the application of the Wigner distribution to cutting tool monitoring and control. After reviewing traditional methods, a new method is proposed. This is to regard the surface texture and geometric error of form of a machined workpiece as the fingerprint of a cutting process, to analyse it, and to extract cutting tool vibration information from it, which can then be used for cutting tool monitoring. In order to analyse the surface texture effectively, three analysing tools, i.e. the Fourier transform, the ambiguity function, the Wigner distribution (WD), are examined and c

APA, Harvard, Vancouver, ISO, and other styles

40

Fu, Pan. "An intelligent cutting tool condition monitoring system for milling operation." Thesis, Southampton Solent University, 2000. http://ssudl.solent.ac.uk/1237/.

Full text

Abstract:

A very important requirement of modern machining systems in an 'unmanned' factory is to change tools that have been subjected to wear or damage in time. The old tool change strategies are based on conservative estimates from the past tool wear data, hence tools can be replaced too early or too late. This can increase the production cost or endanger the quality of the products. An integrated tool condition monitoring system composed of multi-sensors, signal processing methodology and decision-making plans is a crucial requirement for automtic manufacturing processes. An intelligent tool conditi

APA, Harvard, Vancouver, ISO, and other styles

41

Pretorius, Cornelius. "Machining of titanium alloys with ultra-hard cutting tool materials." Thesis, University of Birmingham, 2013. http://etheses.bham.ac.uk//id/eprint/4385/.

Full text

Abstract:

This research explores the relative merits of existing and novel ultra-hard tool materials for finish turning titanium alloys. Phase 1 of the experimental work comprised evaluating the machinability of Ti-6Al-2Sn-4Zr-6Mo when employing carbide tooling with respect to tool life, wear behaviour, workpiece surface integrity and cutting forces. The machinability of Ti-6Al-2Sn-4Zr-6Mo using PCBN tooling was evaluated in Phase 2 experiments. It was shown that even with the use of high pressure jet cooling, carbide and low content PCBN grade inserts were unsuitable for high-speed (~200 m/min) finish

APA, Harvard, Vancouver, ISO, and other styles

42

Bonilla, Hernández Ana Esther. "Analysis and direct optimization of cutting tool utilization in CAM." Licentiate thesis, Högskolan Väst, Forskningsmiljön produktionsteknik(PTW), 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:hv:diva-8672.

Full text

Abstract:

The search for increased productivity and cost reduction in machining can be interpreted as the desire to increase the material removal rate, MRR, and maximize the cutting tool utilization. The CNC process is complex and involves numerous limitations and parameters, ranging from tolerances to machinability. A well-managed preparation process creates the foundations for achieving a reduction in manufacturing errors and machining time. Along the preparation process of the NC-program, two different studies have been conducted and are presented in this thesis. One study examined the CAM programmin

APA, Harvard, Vancouver, ISO, and other styles

43

Roci, Malvina. "Minimizing Variation in Width and Height of Cutting Tool Inserts." Thesis, KTH, Industriell produktion, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-200470.

Full text

Abstract:

Pressing of cemented carbide powders is the second process step in the production of cutting tool inserts, but the first process that gives the geometrical shape to the insert. It is therefore crucial that pressing produces parts with high quality, as it affects the performance of the subsequent operations. Different powder grades with different characteristics behave differently when pressing cemented carbide blanks. Knowing how to optimize the pressing step will speed up the industrialization process when launching new products. It will also lead to improved quality of the inserts.The object

APA, Harvard, Vancouver, ISO, and other styles

44

Erkers, Louise. "Chemical Interactions between tool and Aluminium alloys in metal cutting." Thesis, KTH, Materialvetenskap, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-291358.

Full text

Abstract:

Aluminium applications in automotive will increase by 25 % over the next decade, mainly driven by the electrification and the reduction of fuel consumption. This diploma work aims to increase the understanding of the chemical interactions between aluminium alloys and typical tool systems in metal cutting. First the temperature at the tool-chip interface was estimated by FEM simulations, using the software AdvantEdge. Thereafter the chemical interaction of the tool-chip interface was calculated at the simulated temperature using the Thermo-Calc software. The thermodynamic data and descriptions

APA, Harvard, Vancouver, ISO, and other styles

45

Axelsson, Bengt. "Cutting forces at a tool edge during machining of wood." Licentiate thesis, Luleå, 1993. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-18215.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Duc, Emmanuel. "Usinage de formes gauche : contribution à l'amélioration de la qualité des trajectoires d'usinage." Cachan, Ecole normale supérieure, 1998. http://www.theses.fr/1998DENS0034.

Full text

Abstract:

Les travaux présentés dans ce mémoire ont pour cadre l'usinage des formes gauches. Le processus de réalisation est base sur la cfao et sur l'usinage à grande vitesse. Nos travaux ont pour but d'étudier et de proposer des améliorations de la qualité des trajectoires d'usinage. Dans un premier temps, une analyse théorique des méthodes actuelles est menée. Nous en déduisons que la forme finale est obtenue par une suite d'approximations et d'erreurs tout au long du processus de réalisation, dues, en particulier, a l'emploi de modèles géométriques continus et de l'interpolation linéaire, lors du ca

APA, Harvard, Vancouver, ISO, and other styles

47

Tsui, Kin-shing. "Tool path generation for protrusion milling." Click to view the E-thesis via HKUTO, 2006. http://sunzi.lib.hku.hk/hkuto/record/B36891332.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Lake, P. W. "Composite cutting tip and materials for mining tools." Thesis, Nottingham Trent University, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.375097.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

DiBacco, John 1976. "Laser cutting applications in product design." Thesis, Massachusetts Institute of Technology, 1998. http://hdl.handle.net/1721.1/9571.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Graver, Thomas William. "Determination of cutting-tool inventory levels in a flexible manufacturing system." Thesis, Georgia Institute of Technology, 1987. http://hdl.handle.net/1853/30775.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!