Log in

Relevant bibliographies by topics / Determination of moisture content

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Determination of moisture content'

Author: Grafiati

Published: 4 June 2021

Last updated: 12 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Determination of moisture content.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Determination of moisture content"

1

Sivritepe, N., H. Ö. Sivritepe, and C. Türkben. "Determination of moisture content in grape seeds." Seed Science and Technology 36, no. 1 (April 1, 2008): 198–200. http://dx.doi.org/10.15258/sst.2008.36.1.21.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

A. D. Ghadge, M. G. Britton, and D. S. Jayas. "Moisture Content Determination for Potatoes." Transactions of the ASAE 32, no. 5 (1989): 1744–46. http://dx.doi.org/10.13031/2013.31216.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Zhang, H., S. Q. Xu, S:Y Xiao, and Y. P. Wang. "Determination of seed moisture content in ginseng (Panax ginseng C.A. Mey)." Seed Science and Technology 42, no. 3 (December 1, 2014): 444–48. http://dx.doi.org/10.15258/sst.2014.42.3.10.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Prakash, K., A. Sridharan, and S. Sudheendra. "Hygroscopic moisture content: determination and correlations." Environmental Geotechnics 3, no. 5 (October 2016): 293–301. http://dx.doi.org/10.1680/envgeo.14.00008.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

S. O. Nelson and A. W. Kraszewski. "GRAIN MOISTURE CONTENT DETERMINATION BY MICROWAVE MEASUREMENTS." Transactions of the ASAE 33, no. 4 (1990): 1303–5. http://dx.doi.org/10.13031/2013.31473.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Mark E. Casada and Linus R. Walton. "Tobacco Moisture Content Determination by Microwave Heating." Transactions of the ASAE 28, no. 1 (1985): 307–9. http://dx.doi.org/10.13031/2013.32247.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

BUCKEE, G. K., and M. BENARD. "DETERMINATION OF THE MOISTURE CONTENT OF BARLEY." Journal of the Institute of Brewing 101, no. 3 (May 6, 1995): 169–70. http://dx.doi.org/10.1002/j.2050-0416.1995.tb00856.x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Ameobi, J. B., and J. L. Woods. "DETERMINATION OF MOISTURE CONTENT IN MAIZE EARS." Drying Technology 11, no. 5 (January 1993): 1093–106. http://dx.doi.org/10.1080/07373939308916885.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Lutovska, Monika, Vangelce Mitrevski, Ivan Pavkov, Mirko Babic, Vladimir Mijakovski, Tale Geramitcioski, and Zoran Stamenkovic. "Different methods of equilibrium moisture content determination." Journal on Processing and Energy in Agriculture 21, no. 2 (2017): 91–96. http://dx.doi.org/10.5937/jpea1702091l.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Jolly, W. Matt, and Ann M. Hadlow. "A comparison of two methods for estimating conifer live foliar moisture content." International Journal of Wildland Fire 21, no. 2 (2012): 180. http://dx.doi.org/10.1071/wf11015.

Full text

Abstract:

Foliar moisture content is an important factor regulating how wildland fires ignite in and spread through live fuels but moisture content determination methods are rarely standardised between studies. One such difference lies between the uses of rapid moisture analysers or drying ovens. Both of these methods are commonly used in live fuel research but they have never been systematically compared to ensure that they yield similar results. Here we compare the foliar moisture content of Pinus contorta (lodgepole pine) at multiple sites for an entire growing season determined using both oven-drying and rapid moisture analyser methods. We found that moisture contents derived from the rapid moisture analysers were nearly identical to oven-dried moisture contents (R2 = 0.99, n = 68) even though the rapid moisture analysers dried samples at 145°C v. oven-drying at 95°C. Mean absolute error between oven-drying and the rapid moisture analysers was low at 2.6% and bias was 0.62%. Mean absolute error was less than the within-sample variation of an individual moisture determination method and error was consistent across the range of moisture contents measured. These results suggest that live fuel moisture values derived from either of these two methods are interchangeable and it also suggests that drying temperatures used in live fuel moisture content determination may be less important than reported by other studies.

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Determination of moisture content"

1

Manchikanti, Ujwala. "Evaluation of microwave sensor for soil moisture content determination." [Ames, Iowa : Iowa State University], 2007.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Diefenderfer, Brian Keith. "Moisture Content Determination and Temperature Profile Modeling of Flexible Pavement Structures." Diss., Virginia Tech, 2002. http://hdl.handle.net/10919/27492.

Full text

Abstract:

A majority of the primary roadways in the United States are constructed using hot-mix asphalt (HMA) placed over a granular base material. The strength of this pavement system is strongly influenced by the local environmental conditions. Excessive moisture in a granular base layer can cause that layer to lose its structural contribution by reducing the area over which loading may be distributed. Excessive moisture and fine particles can be transported by hydrostatic pressure to the surface layers, thus reducing the strength of the overlying HMA by contamination. Moisture in the surface HMA layers can cause deterioration through stripping and raveling. In addition, as HMA is a viscoelastic material, it behaves more as a viscous fluid at high temperatures and as an elastic solid at low temperatures. Between these two temperature extremes, a combination of these properties is evident. Thus, understanding the environmental effects on flexible pavements allows better prediction of pavement performance and behavior under different environmental conditions. As part of the ongoing pavement research at the Virginia Smart Road, instrumentation was embedded during construction to monitor pavement response to loading and environment; moisture content of the granular base layers and temperature of the HMA layers were among the responses monitored. The Virginia Smart Road, constructed in Blacksburg, Virginia, is a pavement test facility is approximately 2.5km in length, of which 1.3km is flexible pavement that is divided into 12 sections of approximately 100m each. Each flexible pavement section is comprised of a multi-layer pavement system and possesses a unique structural configuration. The moisture content of aggregate subbase layers was measured utilizing two types of Time-Domain Reflectometry (TDR) probes that differed in their mode of operation. The temperature profile of the pavement was measured using thermocouples. Data for the moisture content determination was collected and results from two probe types were evaluated. In addition, the differences in the moisture content within the aggregate subbase layer due to pavement structural configuration and presence of a moisture barrier were investigated. It was shown that the two TDR probe types gave similar results following a calibration procedure. In addition to effects due to pavement structure and subgrade type, the presence of a moisture barrier appeared to reduce the variability in the moisture content caused by precipitation. Temperature profile data was collected on a continuous basis for the purpose of developing a pavement temperature prediction model. A linear relationship was observed between the temperature given by a thermocouple near the ground surface and the pavement temperature at various depths. Following this, multiple-linear regression models were developed to predict the daily maximum or minimum pavement temperature in the HMA layers regardless of binder type or nominal maximum particle size. In addition, the measured ambient temperature and calculated received daily solar radiation were incorporated into an additional set of models to predict daily pavement temperatures at any location. The predicted temperatures from all developed models were found to be in agreement with in-situ measured temperatures.
Ph. D.

APA, Harvard, Vancouver, ISO, and other styles

3

Paz, Ana Marta. "The dielectric properties of solid biofuels." Doctoral thesis, Mälardalens högskola, Akademin för hållbar samhälls- och teknikutveckling, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-10500.

Full text

Abstract:

The use of bioenergy has been increasing due to efforts in fossil fuels replacement. Modern bioenergy technologies aim for high efficiency and low pollution levels, which increases the need for methods for the on-line characterization of biofuels. Dielectric methods have been identified as useful for the sensing of solid biofuels because they allow for rapid, nonhazardous, nondestructive, and bulk determination of material properties. The dielectric properties describe the interaction between the material and the electromagnetic waves. Dielectric properties are intrinsic of the materials and can therefore be used for the development of prediction models that can be applied regardless of the measurement technique. The study of the dielectric properties is also important as it improves the understanding of the dielectric behavior of the materials. This thesis focuses on the dielectric properties of solid biofuels and their use in the characterization of these materials. The work presented includes the development of new methods permitting the determination of the dielectric properties of solid biofuels with large particle size (waveguide method), broadband measurement of the dielectric properties (coaxial-line probe), and the use of a previously developed method for the accurate determination of the dielectric properties (free-space method). The results includes the dielectric properties of solid biofuels and their dependence on parameters such as frequency, moisture, density, and temperature. This thesis also presents semi-theoretical models for the determination of moisture content, which obtained a RMSEP of 4% for moisture contents between 34 and 67%, and an empirical model that resulted in a RMSEC of 0.3% for moisture contents between 4 and 13%. Finally, this thesis includes measurements of the influence of salt content on the dielectric properties and a discussion of its use for estimation of the ash content of solid biofuels.

APA, Harvard, Vancouver, ISO, and other styles

4

Akanbi, C. T. "The interrelation between composition, processing, method of moisture determination and measured water content of foods." Thesis, University of Leeds, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.355939.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Keech, Andrew M. "The determination of drying kinetics and equilibrium characterisation at low moisture contents." Thesis, University of Canterbury. Chemical and Process Engineering, 1997. http://hdl.handle.net/10092/7161.

Full text

Abstract:

Recently there has been focus on determining the drying behaviour of particulate material at low moisture contents (< 1 %), as a result of increased energy costs and purity requirements for dried products. As little is known about. the drying behaviour of particulate material at these low moisture levels, driers have been oversized by including large safety factors in the sizing calculations, thus incurring unnecessary capital expenditure. A research programme was formulated in an attempt to provide a greater understanding of the moisture movement processes occurring at these low moisture levels. The results of this work indicate the significant effects that influence the drying behaviour of particulate material, which may be implemented into drier sizing calculations. Most particulate materials require a significant amount of energy to remove residual amounts of moisture, particularly from microporous media or from strongly hydrophilic surfaces. Quantifying the energy required to remove this bound moisture is possible from a knowledge of heats of wetting as a function of moisture content. These can be calculated from isotherms under controlled conditions using the Clausius-Claperyon equation. As part of a research programme to look at this type of drying behaviour, a novel apparatus was designed and constructed. The function of this apparatus was to record drying profiles of particulate material under various drying conditions and sample sizes. The sensitivity and reproducibility of the drying profiles were the overiding parameters in the design of such an apparatus. Moisture movement at low moisture levels in thin layers and single particulate arrangements can be described by two mechanisms. Solute bound to hydrophilic and/or active pore surfaces requires a normally distributed activation energy to be overcome, for surface diffusion to occur. Solute held in "water clusters" by hydrophobic media, such as polymeric, some plastic and generally swelling solids, can be described by Fickian movement similar to the familiar transport processes known to occur at higher moisture contents. Thus, it is possible to extrapolate the drying kinetics at higher moisture contents to lower-moisture contents in this instance, but not for the surface diffusion process which takes place only at lower moisture levels. For the drying of thicker layers and beds of particles, accurate overall diffusion coefficients need to include a gas phase diffusion term for gaseous movement through the particulate bed. The studies here have extended the understanding of the drying kinetics dissimilarities between drying single isolated particles, single particle agglomerates, thin layers and beds of particulate material. In sizing calculations of drying units, preliminary kinetics tests on the material to be dried need to be performed under similar bed geometries to that in the full-scale drying unit. For example, thin-layer experiments appear to provide accurate drying kinetic data for the design of cascade rotary driers. The thickness of the thin layer in the drying kinetic tests is determined by the observed thickness of the falling film of material during operation of the cascade rotary drier. Higher gas velocities in a fluidised bed, or flash driers, may be best modelled by drying kinetics studies on single particles or single particle agglomerates. However, at lower gas velocities, thin-layer tests may be more suitable because the drying material in the fluidised bed may dry in a bubbling motion. The final section of this work looked at selective drying of various isopropyl alcohol/water mixtures at low moisture levels. Selective drying at higher moisture contents is generally well understood, by applying azeotropic principles to describe liquid-phase moisture removal from porous matrices. Two-component bound moisture in a porous particulate resides in a solid phase. It is not possible for a binary mixture bound directly to the solid to form an azeotropic mixture. Modelling the removal of this binary bound moisture was shown to fit a surface diffusion model, in which each of the two solvents was treated as a separate entity. In short, selective drying is prevalent at low moisture contents but can be described by two distinct surface diffusion models working independently on each binary species.

APA, Harvard, Vancouver, ISO, and other styles

6

Clarkson, Christopher Raymond. "The effect of coal composition, moisture content, and pore volume distribution upon single and binary gas equilibrium and nonequilibrium adsorption : implications for gas content determination." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk2/tape17/PQDD_0008/NQ34543.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Reyes, Esteves Rocio Guadalupe, and Esteves Rocio Guadalupe Reyes. "Modeling Approaches to Determination of Appropriate Depth and Spacing of Subsurface Drip Irrigation Tubing in Alfalfa to Ensure Soil Trafficability." Thesis, The University of Arizona, 2017. http://hdl.handle.net/10150/625691.

Full text

Abstract:

A major design issue in the implementation of a Subsurface Drip Irrigation (SDI) system for extensively crops such as alfalfa (i.e. crops that cover the entire surface as opposed to row crops), is the determination of the appropriate depth of placement of the drip line tubing. It is important to allow necessary farming operations with heavy equipment at harvesting times while still providing adequate water to meet the crop water requirements. It is also a need to ensure appropriate spacing between the dripline laterals to assure reasonable lateral irrigation uniformity for plant germination. In this study, the program HYDRUS-2D was used to determine the wetting pattern above and laterally from a subsurface drip emitter of an SDI system, for three soils typically found in Southern California and Arizona, a Sandy Clay Loam (SCL), a Clay Loam (CL) and a Loam (L). The design and management conditions from an experimental alfalfa field with an SDI system located at Holtville CA were used and analyzed. The first irrigation design was with a drip line depth of placement of 30 cm and the second design with an installation depth of 50 cm. The two different irrigation management schemes utilized by the farmers and producers in that area were: one with a running time of six hours and a frequency of every three days and the second one with an irrigation running time of twenty-four hours with a frequency of seven days or irrigation every week. After having carried out the analysis and studies of the irrigation designs and management schemes mentioned above, a new model with its corresponding management was proposed to meet the alfalfa water requirements under that particular field and weather conditions while we ensure a sufficiently dry soil surface at harvesting time for each soil case. This irrigation management includes twelve hours or irrigation every three days, for each of the three soils analyzed. It was found that the vertical rise of water above the emitters on the day of the cut, for our recommended SDI management was 26 cm, 29 cm, and 27 cm, with a moisture content at the soil surface of 14.9%, 24%, and 13% for the SCL, CL, and L soils respectively. Then, through the utilization of classical soil mechanics theory, an analysis to calculate the increase in stress on soils at any depth due to a load on the surface from a conventional tractor used during harvest operations was made for the proposed SDI system. The results from the increase in stress were then used together with soil strength properties such as shear strength as a function of soil moisture content to determine the minimum allowable depth of placement of the drip line tubing to ensure that soil failure does not occur. The load increase from a 3,300-kg four-wheel tractor was found to be 0.59 kg/cm2 under a rear tire at 10 cm below the surface and 0.07 kg/cm2 at 70 cm below the surface. To ensure that shearing failure does not occur, a stress analysis using Mohr’s circle indicated that the soil moisture content at 10 cm below the surface should be no greater than 26.8%, 32.7%, and 27% in the SCL, CL, and L soils respectively. The mimimum moisture content of 26.8% occur at 10 cm above the drip line for a SCL soil, which means that the minimum depth placement to avoid failure would be 40 cm below the surface. A similar analysis for the CL and L yielded minimum installation depths of 35 cm and 40 cm respectively. This type of analysis is useful in determining the depth of placement of SDI drip line tubing to ensure adequate trafficability of soil irrigated with subsurface drip irrigation systems. An additional outcome of the modeling study was the determination of the lateral extent of the wetted zone which can be used to determine the appropriate lateral spacing between drip line tubing. Thus, to ensure adequate spatial coverage by a subsurface drip system, the maximum horizontal spacing should be of 80 cm for SCL and L soils and 90 cm in CL soils.

APA, Harvard, Vancouver, ISO, and other styles

8

Al-Alawi, Ahmed Ali. "Novel approaches to automated quality control analyses of edible oils by Fourier transform infrared spectroscopy : determination of free fatty acid and moisture content." Thesis, McGill University, 2005. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=100311.

Full text

Abstract:

Three new quantitative Fourier transform infrared (FTIR) spectroscopic methods were developed for the analysis of edible oils: two procedures to measure free fatty acids (FFA) and one to measure moisture (H2O), the latter two methods ultimately being automated and implemented on an auto-sampler equipped FTIR spectrometer. The methods developed for FFA determination both convert FFAs to their carboxylate salts by means of acid/base reaction without causing oil saponification, one approach using 1-propanol, an oil-miscible solvent, and the other using methanol, an oil-immiscible solvent into which the FFA salts are extracted. The first method involves splitting oil samples into two halves, with one half treated with propanol containing base and the other half with propanol only. The spectra of each half is collected and a differential spectrum obtained, from which quantization is performed. The methanol procedure simply involves extracting FFA into methanol containing a weak base and quantitating the FFA salts produced. Both FFA methods determine the FFA content by measuring the v (COO-) absorbance at ∼1570 cm-1 relative to a reference wavelength of 1820 cm-1 from a differential spectrum relative to the solvent, the extraction procedure being superior in terms of both speed and sensitivity, being able to measure FFA levels down to ∼0.001%. The method developed for moisture determination involves extracting water in edible oils into dry acetonitrile and then quantitating it by measuring the absorbance of the OH stretching band (3629 cm-1) and/or the HOH bending band (1631 cm -1). All three methods were validated by standard addition experiments, evaluated for potential interferences, and, in the case of FFA determination, compared to the performance of AOCS official methods. The results indicated that the extraction-based procedures were superior to conventional wet chemical methods in both sensitivity and reproducibility. The FFA and H2O extraction procedures were subsequently automated by connecting an auto-sampler to the FTIR spectrometer and developing procedures and software algorithms to enable the analysis of up to 100 samples/h. The methods developed and implemented are a substantive improvement over conventional methods for the analysis of FFA and H2O in edible oils and provide a means by which QC and process laboratories can analyze large volumes of edible oils for these two important parameters.

APA, Harvard, Vancouver, ISO, and other styles

9

Koch, Maik. "Reliable moisture determination in power transformers /." Göttingen : Sierke, 2008. http://d-nb.info/990846946/04.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Amjad, Muhammad. "Seed irradiation in relation to moisture content." Thesis, University of Salford, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.281596.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Determination of moisture content"

1

Institution, British Standards. British standard method for determination of moisture content of paper and board by the oven-drying method. 2nd ed. London: B.S.I., 1986.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Green, David W. Moisture content and the shrinkage of lumber. [Madison, WI]: U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1989.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Green, David W. Moisture content and the shrinkage of lumber. [Madison, WI]: U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1989.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Green, David W. Moisture content and the shrinkage of lumber. [Madison, WI]: U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1989.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Amjad, Muhammad. Seed irradiation in relation to moisture content. Salford: University of Salford, 1994.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Forsén, Holger. Accuracy and functionality of hand held wood moisture content meters. Espoo [Finland]: Technical Research Centre of Finland, 2000.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Downing, Troy. Valuing forages based on moisture and nutrient content. [Corvallis, Or.]: Oregon State University Extension Service, 1999.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Schneider, Gary L. Buying and selling forages based on moisture content. [Corvallis, Or.]: Oregon State University Extension Service, Washington State University Cooperative Extension, University of Idaho Cooperative Extension Service, and U.S. Dept. of Agriculture, 1987.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Green, David W. Moisture content and the properties of clear southern pine. Madison, WI (1 Gifford Pinchot Dr., Madison 53705-2398): U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1994.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Green, David W. Moisture content and the properties of clear southern pine. Madison, WI (1 Gifford Pinchot Dr., Madison 53705-2398): U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1994.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Determination of moisture content"

1

Nielsen, S. Suzanne. "Moisture Content Determination." In Food Analysis Laboratory Manual, 105–15. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-44127-6_10.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Delgado, João M. P. Q., António C. Azevedo, and Ana S. Guimarães. "Moisture Content Determination." In Interface Influence on Moisture Transport in Building Components, 17–29. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-30803-2_3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Nielsen, S. Suzanne. "Determination of Moisture Content." In Food Analysis Laboratory Manual, 17–27. Boston, MA: Springer US, 2009. http://dx.doi.org/10.1007/978-1-4419-1463-7_3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Nielsen, S. Suzanne. "Determination of Moisture Content." In Food Analysis Laboratory Manual, 13–22. Boston, MA: Springer US, 2003. http://dx.doi.org/10.1007/978-1-4757-5250-2_3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Schmidt, Shelly J. "Determination of Moisture Content by Pulsed Nuclear Magnetic Resonance Spectroscopy." In Advances in Experimental Medicine and Biology, 599–613. Boston, MA: Springer US, 1991. http://dx.doi.org/10.1007/978-1-4899-0664-9_32.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Ozanich, R. M., M. L. Schrattenholzer, and J. B. Callis. "Noninvasive Determination of Moisture and Oil Content of Wheat-Flour Cookies." In ACS Symposium Series, 137–64. Washington, DC: American Chemical Society, 1992. http://dx.doi.org/10.1021/bk-1992-0511.ch012.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Weisser, Horst, and Franz Liebenspacher. "Determination of Water Content and Moisture Sorption Isotherms of Cellulose Packaging Material." In Food Properties and Computer-Aided Engineering of Food Processing Systems, 223–30. Dordrecht: Springer Netherlands, 1989. http://dx.doi.org/10.1007/978-94-009-2370-6_15.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Rewatkar, Prashant M., and M. Basavaraj. "Determination of Specific Heat of Nagpur Orange Fruit (Citrus-Sinesis L) as a Function of Temperature and Moisture Content." In ICRRM 2019 – System Reliability, Quality Control, Safety, Maintenance and Management, 85–91. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-8507-0_14.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Bährle-Rapp, Marina. "moisture content." In Springer Lexikon Kosmetik und Körperpflege, 359. Berlin, Heidelberg: Springer Berlin Heidelberg, 2007. http://dx.doi.org/10.1007/978-3-540-71095-0_6671.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Gooch, Jan W. "Moisture Content." In Encyclopedic Dictionary of Polymers, 468. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_7605.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Determination of moisture content"

1

Koedudom, T., and P. Yoiyod. "Paper moisture content determination from microwave reflection measurement." In 2017 International Symposium on Antennas and Propagation (ISAP). IEEE, 2017. http://dx.doi.org/10.1109/isanp.2017.8228951.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

So, S. T. C., T. M. F. Lau, and T. H. H. Hui. "Infrared Oven for the Determination of Soil Moisture Content." In Geo-Chicago 2016. Reston, VA: American Society of Civil Engineers, 2016. http://dx.doi.org/10.1061/9780784480151.030.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Zainuddin, Hanina Hanim Mohd, M. A. M. Nawi, M. S. Kasim, M. H. M. Hazwan, W. A. Mustafa, N. Z. Noriman, and Omar S. Dahham. "Determination of moisture content on kenaf via fluidization systems." In 2ND INTERNATIONAL CONFERENCE ON MATERIALS ENGINEERING & SCIENCE (IConMEAS 2019). AIP Publishing, 2020. http://dx.doi.org/10.1063/5.0000269.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Anthony Opoku and Lope G. Tabil. "Whole Green Pea Moisture Content Determination Using a Microwave Oven." In 2004, Ottawa, Canada August 1 - 4, 2004. St. Joseph, MI: American Society of Agricultural and Biological Engineers, 2004. http://dx.doi.org/10.13031/2013.17118.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Sagayaraj, A. Stephen, S. K. Kabilesh, D. Mohanapriya, and A. Anandkumar. "Determination of Soil Moisture Content using Image Processing -A Survey." In 2021 6th International Conference on Inventive Computation Technologies (ICICT). IEEE, 2021. http://dx.doi.org/10.1109/icict50816.2021.9358736.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Kraszewski, A. W., T. S. You, and S. O. Nelson. "Microwave Resonator Technique for Moisture Content Determination in Single Soybean Seeds." In 18th European Microwave Conference, 1988. IEEE, 1988. http://dx.doi.org/10.1109/euma.1988.333923.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Wei, Dongshan, Wei Li, Zhimin Xiong, Changcheng Shi, Jun Shen, Xiaohui Ma, Chunlei Du, and Hong-Liang Cui. "Moisture Content Determination of Polyethylene by Using Terahertz Time-domain Spectroscopy." In International Symposium on Ultrafast Phenomena and Terahertz Waves. Washington, D.C.: OSA, 2016. http://dx.doi.org/10.1364/isuptw.2016.it2a.18.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Liang, Xiuying, Xiaoyu Li, and Tingwu Lei. "A new NIR technique for rapid determination of soil moisture content." In 2012 International Conference on Systems and Informatics (ICSAI). IEEE, 2012. http://dx.doi.org/10.1109/icsai.2012.6223513.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

H.G.J. Snell, B. Kulig, W. Lücke, and H.F.A. Van den Weghe. "Fast Determination of the Moisture Content of Grass using Electromagnetic Fields." In 2001 Sacramento, CA July 29-August 1,2001. St. Joseph, MI: American Society of Agricultural and Biological Engineers, 2001. http://dx.doi.org/10.13031/2013.3435.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Sudakova, M. S., E. B. Terentieva, and A. Kalashnikov. "Determination of Tree Trunks Different Species Moisture Content by GPR Tomography." In Engineering and Mining Geophysics 2021. European Association of Geoscientists & Engineers, 2021. http://dx.doi.org/10.3997/2214-4609.202152107.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Determination of moisture content"

1

Wittekind, W. D. ,. Westinghouse Hanford. Electronmagnetic induction probe calibration for electrical conductivity measurements and moisture content determination of Hanford high level waste. Office of Scientific and Technical Information (OSTI), May 1996. http://dx.doi.org/10.2172/661988.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Ueno, Kohta. Analysis of Joint Masonry Moisture Content Monitoring. Office of Scientific and Technical Information (OSTI), October 2015. http://dx.doi.org/10.2172/1223631.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Ueno, Kohta. Analysis of Joist Masonry Moisture Content Monitoring. Office of Scientific and Technical Information (OSTI), October 2015. http://dx.doi.org/10.2172/1226468.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Phifer, M. MOISTURE CONTENT AND POROSITY OF CONCRETE RUBBLE STUDY. Office of Scientific and Technical Information (OSTI), October 2005. http://dx.doi.org/10.2172/920664.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Labuschagne, B. C. J., R. Markuszewski, T. D. Wheelock, R. K. Guo, and H. T. David. Moisture content as a predictor of coal hydrophobicity. Office of Scientific and Technical Information (OSTI), December 1988. http://dx.doi.org/10.2172/10163787.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Berney, IV, Kyzar Ernest S., Oyelami James D., and Lawrence O. Device Comparison for Determining Field Soil Moisture Content. Fort Belvoir, VA: Defense Technical Information Center, November 2011. http://dx.doi.org/10.21236/ada552792.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Simpson, W. T. Specific gravity, moisture content, and density relationship for wood. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory, 1993. http://dx.doi.org/10.2737/fpl-gtr-76.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Coburn, John F. Moisture Content of Commercial Items Used in the MRE. Fort Belvoir, VA: Defense Technical Information Center, June 2004. http://dx.doi.org/10.21236/ada468214.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Murphy, E. M., J. E. Szescody, and S. J. Phillips. Moisture content and recharge estimates at the Yakima Barricade borehole. Office of Scientific and Technical Information (OSTI), December 1991. http://dx.doi.org/10.2172/10136642.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Antal, Jr, M. J., and X. Xu. Hydrogen production from high moisture content biomass in supercritical water. Office of Scientific and Technical Information (OSTI), August 1998. http://dx.doi.org/10.2172/305624.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!