Log in

Relevant bibliographies by topics / Diagnostics polymer insulation / Journal articles

To see the other types of publications on this topic, follow the link: Diagnostics polymer insulation.

Journal articles on the topic 'Diagnostics polymer insulation'

Author: Grafiati

Published: 30 May 2022

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 21 journal articles for your research on the topic 'Diagnostics polymer insulation.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

G., V. Bezprozvannych, and A. Kostiukov I. "A METHOD OF WAVELET ANALYSIS OF TIME SERIES OF PARAMETERS OF DIELECTRIC ABSORPTION OF ELECTRICAL INSULATING STRUCTURES." Electrical engineering & electromechanics, no. 2 (April 16, 2020): 52–58. https://doi.org/10.20998/2074-272X.2020.2.08.

Full text

Abstract:

<strong><em>Introduction. </em></strong><em>In the objects of control there are always a number of interfaces, for example, solid insulation – electrode. On contacting surfaces, free surface charges are transferred. Surface conductivity leads to fluctuations in the measured values of the capacitance and the tangent of the dielectric loss angle of solid insulation, the state of which is determined. The drain off of the surface charge does not lead to a decrease in the scatter of the measured dielectric absorption parameters. One of the main reasons for the significant time spread of

APA, Harvard, Vancouver, ISO, and other styles

2

Szamel, Laszlo, and Jackson Oloo. "Monitoring of Stator Winding Insulation Degradation through Estimation of Stator Winding Temperature and Leakage Current." Machines 12, no. 4 (2024): 220. http://dx.doi.org/10.3390/machines12040220.

Full text

Abstract:

Switched Reluctance Motors (SRMs), Permanent Magnet Synchronous Motors (PMSMs), and induction motors may experience failures due to insulation-related breakdowns. The SRM rotor is of a non-salient nature and made of solid steel material. There are no windings on the rotor. However, the stator is composed of windings that are intricately insulated from each other using materials such as enamel wire, polymer films, mica tapes, epoxy resin, varnishes, or insulating tapes. The dielectric strength of the insulation may fail over time due to several environmental factors and processes. Dielectric br

APA, Harvard, Vancouver, ISO, and other styles

3

Golovko, Sergey Vladimirovich, and Julia Aleksandrovna Golovko. "Software and hardware complex based on technical vision for diagnosing electrical insulators." Vestnik of Astrakhan State Technical University. Series: Management, computer science and informatics 2022, no. 3 (2022): 30–37. http://dx.doi.org/10.24143/2072-9502-2022-3-30-37.

Full text

Abstract:

Control of the equipment dielectric insulation is one of the most important types of diagnostics in operation of the electrical networks, because the defects cause ionization of voids and partial corona discharges. These discharges gradually destroy the insulation causing the energy loss, radio interference and decreasing the fire safety of the operated electrical equipment. Common failures of electrical insulators are breakdowns, overlaps and mechanical damage. The need to determine the resistance against the surface discharges increases in case of using the new polymer materials due to their

APA, Harvard, Vancouver, ISO, and other styles

4

Usachev, A. E., and A. Yu Kubarev. "Problems of Insulation Diagnostics of Power Equipment by the Method of Partial Discharges." E3S Web of Conferences 288 (2021): 01077. http://dx.doi.org/10.1051/e3sconf/202128801077.

Full text

Abstract:

Target. High information value and reliability of diagnostics of isolation by partial discharges. Methods. Simulation of PD in Multisim and calculation of electrical fields of insulation defects by finite element method in the program ComSol. Results. A strong influence of the power supply on the value of voltage surge in case of emergency has been established. The method of adjustment of this influence is proposed. It was found that the oscillatory form of the PD is mainly determined not by the parameters of the insulation defect, but by the parameters of the energy object in which this defec

APA, Harvard, Vancouver, ISO, and other styles

5

Mushi, Aviti, Jackson Justo, and Alexander Kyaruzi. "Studying Dielectric Losses of Serially Combined Silicone Rubber and Epoxy Resin." Tanzania Journal of Engineering and Technology 42, no. 1 (2023): 85–96. http://dx.doi.org/10.52339/tjet.v42i1.891.

Full text

Abstract:

High voltage outdoor insulation systems are conventionally ceramics and glass with several advantages, such as proven in the field, excellent dielectric properties, durability, and long life. However, they are heavy, attract vandals and break easily, and they can lose their dielectric properties easily when subjected to high voltage transients, arcing, and surges. To curb this, polymer insulators are used because they have excellent dielectric properties, such as those of ceramics and glass, with the added advantages that they do not break easily and recover their lost dielectric properties af

APA, Harvard, Vancouver, ISO, and other styles

6

Zaripov, D. K., R. A. Nasibullin, D. F. Zakirov, and A. V. Zakharov. "Study of operation of a polymer insulator under uniform and non-uniform contamination." Power engineering: research, equipment, technology 25, no. 5 (2024): 20–29. http://dx.doi.org/10.30724/1998-9903-2023-25-5-20-29.

Full text

Abstract:

RELEVANCE. Suspended insulators, the technical condition of which largely determines the reliability of power supply to consumers of different categories, are one of the most damaged elements of overhead power transmission lines [1-2]. This is primarily due to the fact that during their operation, insulators are exposed to various climatic conditions that have a direct impact on their insulating properties. Moreover, precipitation, such as rain, fog or dew, has the greatest impact precisely in combination with various solid, liquid and gaseous particles deposited on the insulator surface from

APA, Harvard, Vancouver, ISO, and other styles

7

Schurch, Roger, Osvaldo Munoz, Jorge Ardila-Rey, Pablo Donoso, and Vidyadhar Peesapati. "Identification of Electrical Tree Aging State in Epoxy Resin Using Partial Discharge Waveforms Compared to Traditional Analysis." Polymers 15, no. 11 (2023): 2461. http://dx.doi.org/10.3390/polym15112461.

Full text

Abstract:

Electrical treeing is one of the main degradation mechanisms in high-voltage polymeric insulation. Epoxy resin is used as insulating material in power equipment such as rotating machines, power transformers, gas-insulated switchgears, and insulators, among others. Electrical trees grow under the effect of partial discharges (PDs) that progressively degrade the polymer until the tree crosses the bulk insulation, then causing the failure of power equipment and the outage of the energy supply. This work studies electrical trees in epoxy resin through different PD analysis techniques, evaluating a

APA, Harvard, Vancouver, ISO, and other styles

8

Gladkikh, Irina F., Tatyana V. Dmitrieva, Dmitry E. Bugai, and Maksim A. Gladkikh. "INFLUENCE OF BITUMEN-POLYMER AND ASMOL MASTIC COMPOSITIONS ON QUALITY INDICATORS OF MATERIALS FOR ANTI-CORROSION INSULATION OF OIL AND GAS PIPELINES." Oil and Gas Business, no. 4 (September 14, 2023): 17–39. http://dx.doi.org/10.17122/ogbus-2023-4-17-39.

Full text

Abstract:

Underground pipelines operating experience shows that their operating life and reliability largely depend on effectiveness of metal corrosion protection, both internal and external surfaces. In the latter case, along with electrochemical protection, insulation coatings play an important role. In recent years, there has been a trend to use factory-insulated pipes. Its advantages are obvious: high-quality preparation of pipe surface, strict control over compliance with the technological mode of application. However, in some cases it is impossible to do without field coating: during overhaul, dia

APA, Harvard, Vancouver, ISO, and other styles

9

Tran, Clara T., Rajesh Ganesan, and David R. McKenzie. "Quantifying plasma immersion ion implantation of insulating surfaces in a dielectric barrier discharge: how to control the dose." Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences 474, no. 2215 (2018): 20180263. http://dx.doi.org/10.1098/rspa.2018.0263.

Full text

Abstract:

The plasma physics of dielectric barrier discharges (DBD) for carrying out ion implantation in insulators is investigated. A hollow cathode DBD excited by high-voltage pulses is suitable for ion bombardment of the surfaces of insulating tubing, porous material, particles and sheets. Plasma immersion ion implantation of insulating surfaces is useful for many applications in medicine and engineering. The ion bombardment of glass is useful for cleaning and surface modification. The ion implantation of polymers creates radicals that are able to bind molecules to their surfaces for applications in

APA, Harvard, Vancouver, ISO, and other styles

10

Vitulo, Paolo, Michele Zanoletti, Riccardo Morina, et al. "The Electrical Response of Real Dielectrics: Using the Voltage Ramp Method as a Straightforward Diagnostic Tool for Polymeric Composites." Materials 15, no. 11 (2022): 3829. http://dx.doi.org/10.3390/ma15113829.

Full text

Abstract:

An experimental method exploiting the capacitive response of most materials is here revised. The procedure called the “Voltage Ramp Method” (VRM) is based on applying proper voltage ramp cycles over time and measuring electrical current intensity flowing through the material sample. In the case of an ideal capacitor, a current plateau should be easily measured, and the capacitance value precisely determined. However, most media, e.g., semiconductors and insulating polymers, show dielectric absorption and hence electric leakage effects. Therefore, the VRM method allows simultaneous determinatio

APA, Harvard, Vancouver, ISO, and other styles

11

Tokoro, Tetsuro, and Masayuki Nagao. "Improvement of Diagnostic Techniques of Hydrophobicity of Polymer Insulator Materials." IEEJ Transactions on Fundamentals and Materials 131, no. 6 (2011): 445–46. http://dx.doi.org/10.1541/ieejfms.131.445.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Mustafa, Ehtasham, Ramy S. A. Afia, and Zoltán Ádám Tamus. "Condition Assessment of Low Voltage Photovoltaic DC Cables under Thermal Stress Using Non-Destructive Electrical Techniques." Transactions on Electrical and Electronic Materials 21, no. 5 (2020): 503–12. http://dx.doi.org/10.1007/s42341-020-00201-3.

Full text

Abstract:

Abstract The output power of the photovoltaic system is heavily dependent on the low voltage (LV) DC cables which are exposed to multiple stresses such as climatic, mechanical, electrical, and thermal stress, hence makes them more exposed to aging as compared to other components in the system. Accordingly, it is essential to monitor the state and know the real cause of the insulation degradation of the cable. The physio-chemical changes inside the insulation during service is attributed to the thermal stress, which the cable has to endure constantly. Traditionally, destructive test techniques

APA, Harvard, Vancouver, ISO, and other styles

13

Huang, Xiaoge, Yiyi Zhang, Jiefeng Liu, Hanbo Zheng, and Ke Wang. "A Novel Fault Diagnosis System on Polymer Insulation of Power Transformers Based on 3-stage GA–SA–SVM OFC Selection and ABC–SVM Classifier." Polymers 10, no. 10 (2018): 1096. http://dx.doi.org/10.3390/polym10101096.

Full text

Abstract:

Dissolved gas analysis (DGA) has been widely used in various scenarios of power transformers’ online monitoring and diagnoses. However, the diagnostic accuracy of traditional DGA methods still leaves much room for improvement. In this context, numerous new DGA diagnostic models that combine artificial intelligence with traditional methods have emerged. In this paper, a new DGA artificial intelligent diagnostic system is proposed. There are two modules that make up the diagnosis system. The two modules are the optimal feature combination (OFC) selection module based on 3-stage GA–SA–SVM and the

APA, Harvard, Vancouver, ISO, and other styles

14

FILIPPENKO, N. G., D. V. BUTORIN, E. F. FARZALIEV, and A. A. SERBOLINA. "AUTOMATED STUDIES OF DIELECTRIC PARAMETERS OF POLYMER MATERIALS AS PART OF A TECHNOLOGICAL MIXTURE." Elektrotekhnologii i elektrooborudovanie v APK 71 (2024): 100–110. http://dx.doi.org/10.22314/2658-4859-2024-71-3-100-110.

Full text

Abstract:

The use of high-quality polymer film as packaging makes it possible to maintain marketable quality and reduce losses during storage of agricultural products even without additional processing. An overview of the existing control systems for the electrophysical parameters of polymeric materials is presented, the use of which serves as the basis for selecting the correct processing modes with the use of high-frequency electrothermal processing. When measuring the electrophysical characteristics of polymeric materials in multicomponent mixtures using standard testing methods, significant errors o

APA, Harvard, Vancouver, ISO, and other styles

15

Karpov, D. F., and M. V. Pavlov. "Assessing thermal properties of enclosing structures of construction facilities by analysis of thermograms." Herald of Dagestan State Technical University. Technical Sciences 48, no. 2 (2021): 92–102. http://dx.doi.org/10.21822/2073-6185-2021-48-2-92-102.

Full text

Abstract:

Objective. One of the most effective ways to assess thermal protection of construction facilities of various applications is thermal control. Methods. According to the national standard “Method for thermal imaging quality control of thermal insulation of enclosing structures” in force on the Russian Federation territory, the results of thermal imaging monitoring of capital and completed construction facilities are divided into qualitative and quantitative depending on set goals and objectives. Qualitative assessment involves computer processing and visual interpretation of thermograms using sp

APA, Harvard, Vancouver, ISO, and other styles

16

Ullah, Rahmat, Muhammad Akbar, Nasim Ullah, Sattam Al Otaibi, and Ahmed Althobaiti. "Understanding Variations in the Tracking and Erosion Performance of HTV-SR-Based Composites due to AC-Stressed Aging." Polymers 13, no. 21 (2021): 3634. http://dx.doi.org/10.3390/polym13213634.

Full text

Abstract:

Among the polymeric family, high-temperature-vulcanized silicone rubber (HTV-SR) is the most deployed material for high voltage insulation applications. However, in an outdoor environment, due to contamination and wetting-induced dry band arcing, consequently SR experiences surface tracking and erosion. From a practical standpoint, the tracking and erosion performance under multi-stress aging is required to be known. It is in that context that the present study was undertaken to measure and analyze the effect of multi-stress aging on tracking and erosion performance. Composite samples of SR ha

APA, Harvard, Vancouver, ISO, and other styles

17

Sharma, Atul, Cihan Asci, and Sameer Sonkusale. "Unveiling a Multiplexed Sensing System for Advanced Biosensing Applications with Thread-Based Electrochemical Sensors." ECS Meeting Abstracts MA2024-01, no. 49 (2024): 2675. http://dx.doi.org/10.1149/ma2024-01492675mtgabs.

Full text

Abstract:

The miniaturization and portability of electrochemical sensing devices play a crucial role in a wide range of applications, including medical diagnostics, environmental monitoring, and point-of-care testing. Integrating a pseudo-reference electrode addresses challenges linked to traditional counterparts, ensuring enhanced portability and miniaturization without performance compromise. Our research delves into the significance of this innovation, emphasizing its impact on signal stability, reproducibility, and overall sensor reliability. The tailored pseudo-reference for compact electrochemical

APA, Harvard, Vancouver, ISO, and other styles

18

Frewin, Christopher, Mohamad Beygi, Evans Bernardin, et al. "The Development of Monolithic Silicon Carbide Intracortical Neural Interfaces for Long-Term Human Implantation." Materials Science Forum 1062 (May 31, 2022): 195–203. http://dx.doi.org/10.4028/p-a08hju.

Full text

Abstract:

Silicon Carbide (SiC) has been demonstrated as both a bio- and neuro-compatible wide-band-gap semiconductor with a high thermal conductivity and magnetic susceptibility and may be potentially compatible with human brain tissue. Two single-crystal, solid-state forms of SiC have been used to create monolithic intracortical neural implants (INI) without using physiologically exposed metals or polymers, thus eliminating many known reliability challenges in-vivo through a single, homogenous material. Amorphous SiC (a-SiC) was used to insulate 16-channel functional INI and the electrochemical and MR

APA, Harvard, Vancouver, ISO, and other styles

19

Aviti, Thadei Mushi, John Justo Jackson, and Kyaruzi Alexander. "Studying Dielectric Losses of Serially Combined Silicone Rubber and Epoxy Resin." February 28, 2023. https://doi.org/10.52339/tjet.v42i1.891.

Full text

Abstract:

High voltage outdoor insulation systems are conventionally ceramics and glass with several advantages, such as proven in the field, excellent dielectric properties, durability, and long life. However, they are heavy, attract vandals and break easily, and they can lose their dielectric properties easily when subjected to high voltage transients, arcing, and surges. To curb this, polymer insulators are used because they have excellent dielectric properties, such as those of ceramics and glass, with the added advantages that they do not break easily and recover their lost dielectric properties af

APA, Harvard, Vancouver, ISO, and other styles

20

Jamail, N. A. M., M. A. M. Piah, N. A. Muhamad, R. A. Zainir, N. F. Kasri, and Q. E. Kamarudin. "Polarization and Depolarization Current Measurement of Polymer Added with Nano-particles of Silicon Oxide For HV Insulation." Jurnal Teknologi 64, no. 4 (2013). http://dx.doi.org/10.11113/jt.v64.2116.

Full text

Abstract:

Polymer nanocomposites materials have recently emerged as a dielectric and for electrical insulation. Polyethylene has long been used as extruded cable and HV insulation. Currently, this material has received significant attention because of its ability to enhance electrical insulation properties by addition of nano-filler. Polarization and Depolarization Current (PDC) measurement is an efficient and effective diagnostic technique based on time domain measurement for evaluating and condition monitoring of polymer nanocomopsite for HV insulation. Electrical conduction for polymer nanocomposites

APA, Harvard, Vancouver, ISO, and other styles

21

Ameku, W.A., V.N. Ataide, E.T. Costab, et al. "A pencil-lead immunosensor for the rapid electrochemical measurement of anti-Diphtheria Toxin antibodies." October 30, 2021. https://doi.org/10.5281/zenodo.5628477.

Full text

Abstract:

<strong>Abstract: </strong>Diphtheria is a vaccine-preventable disease, yet immunization can wane over time to non-protective levels. We have developed a low-cost, miniaturized electroanalytical biosensor to quantify anti-diphtheria toxin (DTx) immunoglobulin G (IgG) antibody to minimize the risk for localized outbreaks. Two epitopes specific to DTx and recognized by antibodies generated post-vaccination were selected to create a bi-epitope peptide, biEP, by synthesizing the epitopes in tandem. The biEP peptide was conjugated to the surface of a pencil-lead electrode (PLE) integrated into a po

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!