Relevant bibliographies by topics / Diamond surface

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Diamond surface'

Author: Grafiati
Published: 28 May 2022
Last updated: 30 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Diamond surface.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Diamond surface"

1

Valerii, Lavrinenko, Solod Volodymyr, Ilnytska Halina, Smokvyna Volodymyr, and Kashynskiy Ivan. "RESEARCH OF THERMAL INFLUENCE ON THE CHANGE OF THE SURFACE LAYER OF DIAMONDS AND ASSOCIATED TOOL MATERIALS (REVIEW)." Collection of scholarly papers of Dniprovsk State Technical University (Technical Sciences) 2, no. 43 (2023): 39–55. http://dx.doi.org/10.31319/2519-2884.43.2023.4.

Full text
Abstract:
Attention is drawn to the fact that the issues of effective processing of such fragile, difficult-to-process materials as mono- and polycrystalline diamonds are currently being discussed in the literature, including CVD diamond films, sapphire, etc. For the most part, such processing is faced with the issues of thermal impact on the surface of the tool material, taking into account the defects of the diamonds that undergo processing, directed impact on the surface of such diamonds, heat and modification of the surface of diamonds and accompanying tool materials.
 In this review, attention
APA, Harvard, Vancouver, ISO, and other styles
2

Lin, Guan Fu, Ming Yi Tsai, and Chiu Yuan Chen. "Development of a Combined Diamond Impregnated Lapping Plate." Key Engineering Materials 739 (June 2017): 157–63. http://dx.doi.org/10.4028/www.scientific.net/kem.739.157.

Full text
Abstract:
This paper presents a combined diamond-impregnated lapping plate for single crystal silicon carbide (SiC) to improve the material removal rate due to SiC having very low material removal rate. Three different dimaond shapes were prepared: (1) "sharp," a sharp-edged diamod; (2) "blocky," a high quality crystalline diamond; (3) "oxidized diamond". The diamonds were manufactured by using high temperature heating method in a furnace to induce diamond oxidation resulting in improvement of Ra and sharpness of the diamonds. Three combined diamond-impregnated lapping plates were fabricated using the a
APA, Harvard, Vancouver, ISO, and other styles
3

Yuan, Zewei, Zhihui Cheng, and Yusen Feng. "A Systematic Study of the Factors Affecting the Surface Quality of Chemically Vapor-Deposited Diamond during Chemical and Mechanical Polishing." Micromachines 15, no. 4 (2024): 459. http://dx.doi.org/10.3390/mi15040459.

Full text
Abstract:
Diamond surfaces must be of high quality for potential use in semiconductors, optical windows, and heat conductivity applications. However, due to the material’s exceptional hardness and chemical stability, it can be difficult to obtain a smooth surface on diamond. This study examines the parameters that can potentially influence the surface quality of chemically vapor-deposited (CVD) diamonds during the chemical and mechanical polishing (CMP) process. Analysis and experimental findings show that the surface quality of polished CVD diamonds is significantly influenced by the crystal structure
APA, Harvard, Vancouver, ISO, and other styles
4

Segl, Jakob, and Christian Edtmaier. "Influence of the Diamond Surface Termination on the Thermal Conductivity of Al/Diamond- and Ag/Diamond MMCs." Materials Science Forum 825-826 (July 2015): 142–49. http://dx.doi.org/10.4028/www.scientific.net/msf.825-826.142.

Full text
Abstract:
MMCs consisting of diamonds and highly conductive metal matrices have been produced via gas pressure assisted liquid metal infiltration and their thermal properties have been investigated. Special attention was paid towards the diamond surface termination and its influence on the diamond-metal-interface and the resulting heat transport across this interface. Altering the diamond terminating surface layer can lead to a rather drastic increase in the thermal conductivity, rendering MMCs with pretreated diamonds double the thermal conductivity of the ones with as-received diamonds. The evolution
APA, Harvard, Vancouver, ISO, and other styles
5

Ilnytska, H. D., O. B. Loginova, V. V. Smokvyna, I. M. Zaitseva, and О. V. Dovha. "Features of the physicochemical properties of narrow fractions of aggregates of diamond nanopowders modified with iron ions." Surface 12(27) (December 30, 2020): 161–68. http://dx.doi.org/10.15407/surface.2020.12.161.

Full text
Abstract:
The paper presents the results of a study of the physical and chemical properties of narrow fractions of diamond nanopowders with a low content of non-diamond carbon grade ASUD-99. Six fractions with different average diameters of diamond particle aggregates from 28.785 to 3.891 μm were obtained by separating a 0.2 % aqueous suspension of the initial powders by the sedimentation method. It has been found that the smallest aggregates consist of larger particles with a smaller specific surface area and a lower interaction energy between them. This conclusion is confirmed by a decrease in the por
APA, Harvard, Vancouver, ISO, and other styles
6

Miwa, Hirotaka, Takayoshi Katagi, Minoru Ota, Keishi Yamaguchi, Kai Egashira, and Toshikazu Nanbu. "Surface Finishing on Arc-Shaped Inner Surface by Ultraviolet Assisted Polishing." Materials Science Forum 874 (October 2016): 133–38. http://dx.doi.org/10.4028/www.scientific.net/msf.874.133.

Full text
Abstract:
Recently, diamonds have been utilized gradually for sliding parts and wear-resistant parts because of their excellent properties. The shape of diamond applied to these parts is not only plane but also arc-shaped inner surface. Therefore, development of diamond polishing technology is required. In this study, ultraviolet assisted polishing was thought to develop to polish polycrystalline diamond (PCD) on arc-shaped inner surface. The authors investigated effect of ultraviolet radiation on polishing efficiency and surface roughness. As a result, the surface roughness Ra of PCD showed less than 1
APA, Harvard, Vancouver, ISO, and other styles
7

Xiang, Dong, Li Qun Jia, and Ke Gao Liu. "Structure and Performance of Chemical Duplex Plating Ti Metal Layer on Diamond Surface by Hydrothermal Method." Advanced Materials Research 936 (June 2014): 1676–80. http://dx.doi.org/10.4028/www.scientific.net/amr.936.1676.

Full text
Abstract:
As a surface of diamond has a higher interfacial energy and worse binding force, the diamond shed from matrix easily. For solving this, the microstructures and properties of the metallic coating on diamond surface were studied. The different temperatures, such as 110, 120, and 130 °C for 6 h, were used for coating diamond in the high-pressure reactor respectively. The structure and performance of the metallic coating on diamond surface were tested by Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD) and diamond compressive strength instrument. The results showed that a continuous and
APA, Harvard, Vancouver, ISO, and other styles
8

Liao, Yunn Shiuan, and C. T. Yang. "Investigation of the Wear of the Pad Conditioner in Chemical Mechanical Polishing Process." Advanced Materials Research 76-78 (June 2009): 195–200. http://dx.doi.org/10.4028/www.scientific.net/amr.76-78.195.

Full text
Abstract:
The pad surface will become grazed because of the accumulated debris in the chemical mechanical polishing (CMP) process. It results in the reduction of the wafer removal rate, and a pad conditioner or diamond disk must be frequently employed to refresh the pad surface. The wear behavior of a diamond with respect to its location, original relative protruded height and protruded shape on a diamond disk was investigated in this thesis. It was found from experimental data that the diamonds which were located outside, originally protruded more highly and with crest lines oriented upward wore faster
APA, Harvard, Vancouver, ISO, and other styles
9

Naruse, Yuto, Jae-Hyeok Park, Tkeshi Hagio, Yuki Kamimoto, Ryoichi Ichino, and Takeshi Bessho. "Electroplating of copper/microdiamond composites and the effect of diamond surface functionalization." Functional Materials Letters 14, no. 05 (2021): 2151023. http://dx.doi.org/10.1142/s1793604721510231.

Full text
Abstract:
Compositing diamonds with high thermally conductive metals, such as copper, have attracted much attention in recent years. In this study, we prepared copper/diamond composites by electroplating and investigated the effect of the surface functionalization of diamond on the interfacial adhesion of copper and diamond in the composite. Oxygen-containing groups were introduced on the diamond surface by a hydrothermal treatment and amino groups were further introduced using a silane coupling agent. Surface functionalization of diamond with both these groups led to drastically increased wettability a
APA, Harvard, Vancouver, ISO, and other styles
10

Takahashi, Mamoru, and Osamu Kamiya. "Influence of Diamond Seed Attachment Processing on Diamond Films Synthesized on Tungsten Carbide Substrate by Flame Combustion." Journal of Materials and Applications 12, no. 1 (2023): 11–20. http://dx.doi.org/10.32732/jma.2023.12.1.11.

Full text
Abstract:
The flame combustion method enables the synthesis of diamonds via acetylene-oxygen gas flame combustion in ambient air. Tungsten carbide (WC) has recently been utilized as a cutting tool in the machining industry and in dental machining applications. To obtain high-quality diamond films and achieve good adhesion on a WC substrate, diamond films are synthesized on a WC substrate by the flame combustion method. However, the surface roughness of most of the diamond films synthesized by this method increased, and it was necessary to reduce this roughness. Considering the roughness accuracy of the
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Diamond surface"

1

Wang, Hao. "Surface and electrochemical studies of CVD diamond thin films." Thesis, University of Oxford, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.670126.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Williams, Oliver Aneurin. "Surface conductivity on hydrogenated diamond." Thesis, University College London (University of London), 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.405246.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Gao, Fang [Verfasser], and Oliver [Akademischer Betreuer] Ambacher. "Towards surface-enlarged diamond materials : creation of surface-enlarged diamond electrodes for electrochemical energy applications." Freiburg : Universität, 2016. http://d-nb.info/1119717663/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Lau, Chi Hian. "Chemical, electronic and electrochemical properties of diamond thin films." Thesis, University of Oxford, 2002. http://ora.ox.ac.uk/objects/uuid:53a0886c-14ad-431a-975d-0ecca8fc8968.

Full text
Abstract:
Diamond is of interest as an advanced functional material, since the extreme physical properties of diamond, suggests it is ideally suited to a range of new demanding applications. In this context, the thesis explores basic surface chemical properties of diamond thin films, along with electrochemical, electronic and electron emission processes involving this material. New experiments are reported concerning the nature of surface conductivity on diamond. Measurements clearly show that the conductivity only arises if a hydrogenated diamond surface is exposed to water vapour, in the presence of c
APA, Harvard, Vancouver, ISO, and other styles
5

Cui, Shanying. "Near-surface Nitrogen Vacancy Centers in Diamond." Thesis, Harvard University, 2014. http://nrs.harvard.edu/urn-3:HUL.InstRepos:13064815.

Full text
Abstract:
The nitrogen-vacancy (NV) center is a point defect in diamond and has been championed as a promising solid-state "artificial atom." NV center properties such as its bright luminescence, room-temperature optical readout of spin states, and long spin decoherence lifetime make it an excellent system for applications in quantum information processing, high sensitivity magnetometry, and biotagging. In all applications, near-surface NVs are desirable. However, it has been found that the favorable properties of the NV center are significantly diminished as the NV center nears the surface. This disse
APA, Harvard, Vancouver, ISO, and other styles
6

Shpilevaya, Inga. "Surface characterisation and functional properties of modified diamond electrodes." Thesis, University of Oxford, 2014. http://ora.ox.ac.uk/objects/uuid:55c8243f-3779-4bcc-878a-999a067cc9c4.

Full text
Abstract:
In this work, the use of modified diamond as an electrode material with superlative physical and electrochemical properties was investigated in a number of electrochemical applications. The surface chemistry of three differing forms of diamond, namely boron-doped microcrystalline diamond, boron-doped diamond powder and detonation nanodiamond powder was modified utilising such strategies as hydrogen plasma treatment, reactive ion plasma etching along with various chemical treatments. The surface and functional properties of the modified diamond electrodes were studied using a wide spectrum of t
APA, Harvard, Vancouver, ISO, and other styles
7

Kitabayashi, Hiroyuki. "Surface acoustic wave filters on diamond layered structures /." *McMaster only, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Bennett, Andrew Michael. "Properties, processes and surface chemistry at diamond interfaces." Thesis, University of Oxford, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.434867.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Al, Johani Ebrahim Dakhil. "Surface transfer doping of diamond for power electronics." Thesis, Massachusetts Institute of Technology, 2020. https://hdl.handle.net/1721.1/129079.

Full text
Abstract:
Thesis: M. Eng., Massachusetts Institute of Technology, Department of Electrical Engineering and Computer Science, September, 2020<br>Cataloged from student-submitted PDF of thesis.<br>Includes bibliographical references (pages 77-80).<br>The quest for a suitable wide-bandgap semiconductor for high-power and high-frequency applications is well motivated; wide-bandgap semiconductors generally exhibit a high breakdown field and can therefore support a high voltage over short distances. Diamond (Bandgap of 5.5 eV) in particular is an attractive prospect since its thermal conductivity and radiatio
APA, Harvard, Vancouver, ISO, and other styles
10

Larsson, Johanna Svanberg. "Surface chemical and particle modification of diamond electrodes." Thesis, University of Oxford, 2017. http://ora.ox.ac.uk/objects/uuid:0cfc3606-9bd1-44a5-a0f7-dc432e682a0d.

Full text
Abstract:
Boron-doped diamond electrodes (BDDs) offer a range of advantageous properties for electrochemical sensing. They are normally used with a chemical surface termination comprised of oxygen species, but hydrogen terminations are also stable. A hydrogen surface termination offers different hydrophobicity, band alignments and surface conductivity of the BDDelectrolyte interface. The broad aim of this thesis is therefore to establish the influence of surface termination on the electrochemical sensing properties of BDDs. The work also encompasses the properties of BDD electrodes decorated with metal,
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Diamond surface"

1

Ohlupin, Dmitriy, Al'bert Korolev, and Il'ya Sinev. Mechanochemical method of polishing a polycrystalline diamond coating. INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1141765.

Full text
Abstract:
The monograph presents a solution to the technological problem of polishing a polycrystalline diamond coating by a mechanochemical method in order to ensure the required surface roughness and high processing performance. The analysis of existing schemes and methods of polishing diamonds and diamond coatings is carried out. A technology for polishing diamond coatings with a metal brush is proposed, which provides brittle destruction of the vertices of large micro-roughnesses and graphitization of small micro-roughnesses. For researchers, postgraduates and specialists of industrial enterprises i
APA, Harvard, Vancouver, ISO, and other styles
2

Cheung, C. F. Surface generation in ultra-precision diamond turning: Modelling and practices. Professional Engineering, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Barry, J. J. The surface integrity of AlSi9 alloy machined with poly crystalline diamond tools. University College Dublin, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kirovskai͡a, I. A. Poverkhnostnye svoĭstva almazopodobnykh poluprovodnikov, khimicheskiĭ sostav poverkhnosti, kataliz. Izd-vo Irkutskogo universiteta, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

T, Mearini G., and United States. National Aeronautics and Space Administration., eds. Effects of surface treatments on secondary electron emission from CVD diamond films. National Aeronautics and Space Administration, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

T, Mearini G., and United States. National Aeronautics and Space Administration., eds. Effects of surface treatments on secondary electron emission from CVD diamond films. National Aeronautics and Space Administration, 1995.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Miyoshi, Kazuhisa. Surface design and engineering toward wear-resistant, self-lubricant diamond films and coatings. National Aeronautics and Space Administration, Glenn Research Center, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Miyoshi, Kazuhisa. Surface design and engineering toward wear-resistant, self-lubricant diamond films and coatings. National Aeronautics and Space Administration, Glenn Research Center, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Miyoshi, Kazuhisa. Surface design and engineering toward wear-resistant, self-lubricating diamond films and coatings. National Aeronautics and Space Administration, Lewis Research Center, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Miyoshi, Kazuhisa. Surface design and engineering toward wear-resistant, self-lubricating diamond films and coatings. National Aeronautics and Space Administration, Lewis Research Center, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Diamond surface"

1

Einaga, Yasuaki, Seiji Kasahara, and Keisuke Natsui. "Electrochemical Properties of BDD Electrodes by Surface Control." In Diamond Electrodes. Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-7834-9_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Catalan, Francesca Celine I., and Yousoo Kim. "Localized Surface Characterization of Boron-Doped Diamond Film Electrodes." In Diamond Electrodes. Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-7834-9_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Tateyama, Yoshitaka, Zdenek Futera, Yusuke Ootani, Shota Iizuka, and Le The Anh. "Computational Aspects of Surface and Interface of BDD Electrode." In Diamond Electrodes. Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-7834-9_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Smith, Roger. "Modelling and Simulation of Particle-Surface Interactions." In Diamond and Diamond-like Films and Coatings. Springer US, 1991. http://dx.doi.org/10.1007/978-1-4684-5967-8_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Ley, Lothar. "Surface Conductivity of Diamond." In CVD Diamond for Electronic Devices and Sensors. John Wiley & Sons, Ltd, 2009. http://dx.doi.org/10.1002/9780470740392.ch4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Larsson, Karin. "Surface Chemistry of Diamond." In Topics in Applied Physics. Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-09834-0_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Dubray, J. J., W. A. Yarbrough, and C. G. Pantano. "Physico-Chemical Aspects of Surface Treatments for Diamond Nucleation." In Diamond and Diamond-like Films and Coatings. Springer US, 1991. http://dx.doi.org/10.1007/978-1-4684-5967-8_39.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Lemmer, O., R. Cremer, D. Breidt, M. Frank, and J. Müller. "Hot-filament CVD Diamond Thin Films." In Modern Surface Technology. Wiley-VCH Verlag GmbH & Co. KGaA, 2006. http://dx.doi.org/10.1002/3527608818.ch6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Kondo, Takeshi. "Surface Functionalization of Diamond Electrodes." In Electrical Phenomena at Interfaces and Biointerfaces. John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118135440.ch30.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Shikata, Shin-ichi. "CVD Diamond for Surface Acoustic Wave Filters." In Low-Pressure Synthetic Diamond. Springer Berlin Heidelberg, 1998. http://dx.doi.org/10.1007/978-3-642-71992-9_14.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Diamond surface"

1

Lindner, Lukas, Yves Rottstaedt, Florian Schall, et al. "VECSEL-assisted laser threshold magnetometry with nitrogen-vacancy centers in diamond." In Vertical External Cavity Surface Emitting Lasers (VECSELs) XIV, edited by Marcel Rattunde. SPIE, 2025. https://doi.org/10.1117/12.3042783.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Pregliasco, R. G., H. Huck, E. Halac, M. A. R. de Benyacar, and G. Zampieri. "Microscopic structure of diamond-like C films." In The 8th Latin American congress on surface science: Surfaces , vacuum, and their applications. AIP, 1996. http://dx.doi.org/10.1063/1.51220.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Camps, Enrique, C. Gutiérrez-tapia, Oscar Olea, Mayo Villagrán, and Sergio Jiménez. "Diamond-like carbon deposition using a microwave ECR discharge." In The 8th Latin American congress on surface science: Surfaces , vacuum, and their applications. AIP, 1996. http://dx.doi.org/10.1063/1.51166.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

He, Jintian, Da-jun Liu, Xiaoping Wang, Binglin Zhang, Jianen Wang, and Shu-po Shen. "Diamond thin film deposition on amorphous diamond film surface." In Thin Film Physics and Applications: Second International Conference, edited by Shixun Zhou, Yongling Wang, Yi-Xin Chen, and Shuzheng Mao. SPIE, 1994. http://dx.doi.org/10.1117/12.190720.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Khomich, A. V., V. V. Kononenko, Sergej M. Pimenov, et al. "Optical properties of laser-modified diamond surface." In Lasers in Synthesis, Characterization, and Processing of Diamond, edited by Vitali I. Konov and Victor G. Ralchenko. SPIE, 1998. http://dx.doi.org/10.1117/12.328204.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Maity, Smarak, Linbo Shao, Stefan Bogdanovic, et al. "Surface Acoustic Control of Single Silicon Vacancy Spins in Diamond." In Diamond Photonics - Physics, Technologies and Applications. OSA, 2019. http://dx.doi.org/10.1364/dp.2019.130.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Phillips, David. "Tales from Diamond Surface Features." In International Kimberlite Conference. University of Alberta, 2024. http://dx.doi.org/10.29173/ikc4172.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Horiuchi, Osamu, and Shyunji Itoh. "Flatness and surface roughness of diamond-turned surface." In International Conferences on Optical Fabrication and Testing and Applications of Optical Holography, edited by Toshio Kasai. SPIE, 1995. http://dx.doi.org/10.1117/12.215620.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Yarbrough, Walter A. "Diamond growth on the (110) surface." In San Diego, '91, San Diego, CA, edited by Albert Feldman and Sandor Holly. SPIE, 1991. http://dx.doi.org/10.1117/12.48283.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Cherniyenko, Oleksandr, Oleksandr Bochechka, Vladyslav Vienikov, and Anna Liamtseva. "Kinetics of the Densification of Polycrystals Sintered by the Hpht Method from Diamond Powder Synthesized in the System Mg–Zn-B-C Coated by Titanium." In International Young Scientists Conference on Materials Science and Surface Engineering. Karpenko Physico-Mechanical Institute of the NAS of Ukraine, 2023. http://dx.doi.org/10.15407/msse2023.031.

Full text
Abstract:
The dependence of the density of diamond polycrystals sintered at different temperatures by HPHT method from diamond powders synthesized in the Mg–Zn–B–C system on the duration of sintering was investigated. The purpose of this work is to use titanium as a protective coating on the surface of diamond powder particles to create an insulating layer during sintering between the oxygen contained in the pores during sintering and the surface of the diamond powder, to reduce the degree of transformation of diamond into graphite. The density and porosity of the sintered polycrystals were measured by
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Diamond surface"

1

Wei, Jian, V. S. Smentkowski, Jr Yates, and J. T. Selected Bibliography II-Diamond Surface Chemistry. Defense Technical Information Center, 1993. http://dx.doi.org/10.21236/ada273518.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Vasilyeva, M. I., P. P. Sharin, G. G. Vinokurov, and M. V. Fedorov. Quantitative Assessment of Diamond Particles on Working Surface of a Diamond Drill. Наука и образование, 2017. http://dx.doi.org/10.18411/2073-8129-2017-4-88-88-92.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Mehta, P., C. S. Feigerle, R. E. Clausing, L. Heatherly, and T. Thundat. Analysis of the surface structure of HFCVD diamond films. Office of Scientific and Technical Information (OSTI), 1995. http://dx.doi.org/10.2172/106570.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Redmond, J., T. Hinnerichs, and E. Apodaca. Surface waviness resulting from single point diamond dressing in cylindrical grinding. Office of Scientific and Technical Information (OSTI), 1996. http://dx.doi.org/10.2172/251353.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Gardos, Michael N. Surface-Chemistry-Driven Tribological Fundamentals of Diamond and SiC for Extreme Environment MEMS Applications. Defense Technical Information Center, 2000. http://dx.doi.org/10.21236/ada386778.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Chin, Rodney Peter. Nonlinear optical spectroscopy of diamond surfaces. Office of Scientific and Technical Information (OSTI), 1995. http://dx.doi.org/10.2172/93466.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Daley, R., and R. Musket. Hydrogen chemisorption on diamond surfaces. Final report. Office of Scientific and Technical Information (OSTI), 1994. http://dx.doi.org/10.2172/86911.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

de Leon, Nathalie. Exploring New Diamond Surfaces with Precision Chemistry and Quantum Spectroscopy. Office of Scientific and Technical Information (OSTI), 2024. https://doi.org/10.2172/2350751.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Diamond surface' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography