Academic literature on the topic 'Diferenční metoda'

This dissertation presents the solution of difference equations and focuses on a method of difference equations solution with the aid of eigenvectors. The first part reminds the basic terms from area of difference equations such as dynamic of difference equations and linear difference equations of first order and higher order. Then the second section recalls also the system of difference equations including the fundamental matrix and general solution description. Afterthat, the method of solving the difference equations with a variation of constants and transform of scalar equations to the system are shown. The second part of the dissertation analyses some known algorithms and methods for the solution of linear difference equations. The Z-transform, its importance and usage for finding the solution of difference equation is recalled. Then the discrete analogue of Putzer's algorithm is mentioned because this algorithm was often used to check the results obtained by the newly described algorithm in further parts of this thesis. Also some ways of the system matrix power are stated. The next section then describes the principle of Weyr's method which is the basic point for further development of the theory including the presentation of the research results gained by Jiří Čermák in this area. The third part describes own solution of the difference equations system via eigenvectors based on the principle of Weyr's method for differential equations. The solution of system of linear homogeneous difference equtions with constant coefficients including the proof is presented and this solution is then extended to nonhomogeneous systems. Consequently to the theory, the influence of a nulity and the multiplicity of roots on the form of the solution is discussed. The last section of this part shows the implementation of the algorithm in Matlab program (for basic simpler cases) and its application to some cases of difference equations and systems with these equations. The final part of the thesis is more practical and it presents the usage of the designed algorithm and theory. Firstly, the algorithm is compared with Z-transform and the method of variation of constants and it is illustrated how to obtain the same results by using these three approaches. Then an example of current response solution in RLC circuit is demonstrated. The continuous case is solved and then the problem is transferred to discrete case and solved with the Z-transform and the method of eigenvectors. The obtained results are compared with the result of the continuous case.

Disertační práce se zabývá vyšetřováním kvalitativních vlastností diferenčních rovnic se zpožděním, které vznikly diskretizací příslušných diferenciálních rovnic se zpožděním pomocí tzv. $\Theta$-metody. Cílem je analyzovat asymptotické vlastnosti numerického řešení těchto rovnic a formulovat jeho horní odhady. Studována je rovněž stabilita vybraných numerických diskretizací. Práce obsahuje také srovnání s dosud známými výsledky a několik příkladů ilustrujících hlavní dosažené výsledky.

This diploma thesis deals with the method which are useful for analysis of reliability in specific circuit applications. It also deals with fault analysis in frequency, time and DC domain. Methods for these domains are described in other chapter of this thesis. Finally methods for diagnostics analog circuit are evaluated based on simulation and practical testing of selected methods.

The goal of this thesis is to introduce the finite difference method (FDM) adjusted for usage in modeling of sound propagation, and other approaches that are used together with this method. These approaches include selective filtering and time integration using the Runge-Kutta method, which has low computer memory requirements. An important topic in modeling sound propagation are boundary conditions. The thesis examines and verifies several types of boundary conditions. Included in the thesis are solutions to example problems implemented in Matlab.

Disertační práce formuluje asymptotické odhady řešení tzv. sublineárních a superlineárních diferenciálních rovnic se zpožděním. V těchto odhadech vystupuje řešení pomocných funkcionálních rovnic a nerovností. Dále práce pojednává o kvalitativních vlastnostech diferenčních rovnic se zpožděním, které vznikly diskretizací studovaných diferenciálních rovnic. Pozornost je věnována souvislostem asympotického chování řešení rovnic ve spojitém a diskrétním tvaru, a to v obecném i v konkrétních případech. Studována je rovněž stabilita numerické diskretizace vycházející z $\theta$-metody. Práce obsahuje několik příkladů ilustrujících dosažené výsledky.

This thesis deals with modelling of continuous casting of steel. This process of steel manufacturing has achieved dominant position not only in the Czech Republic but also worldwide. The solved casted bar cross-section shape is circular, because it is rarely studied in academical works nowadays. First part of thesis focuses on creating numerical model of thermal field, using finite difference method with cylindrical coordinates. This model is then employed in optimization part, which represents control problem of abrupt step change of casting speed. The main goal is to find out, whether the computation of numerical model and optimization both can be parallelized using spatial decomposition. To achieve that, Progressive Hedging Algorithm from the field of stochastic optimization has been used.

This work deals with techniques of time-domain analysis of interconnects. After a studying crucial issue of time-domain analysis of interconnects methods of modeling and simulation simple interconnects in electrotechnics are described. For transient effect analysis two elementary methods can be used: the state variable method and the FDTD (Finite - Difference Time - Domain) method. The FDTD method can be used to solve partial differential equations in time domain, for instance equations of transmission lines. The method is very effective and delivers satisfactory results in case of linear and non-linear lines with a single “live” conductor. The method can be easily programmed in Matlab.

This master’s thesis deals with designing of fully-differential current-mode frequency filters using signal-flow graphs method. The first part is focused on a general description of frequency filters, its function and division. Active elements that create these frequency filters, such as multi-output current follower (MO-CF), balanced or multi-output transconductance amplifier (BOTA, MOTA) and digitally adjustace current amplifier (DACA) are described in the following part. Next, problems and various techniques of designing such filters are discussed on a theoretic basis. In the remaining part of the thesis there are six circuits of frequency filters described in detail; these connections are then transferred of passive elements to a proposed connections, with the assistance of a so-called reflection. Calculations of passive form are stated, as well as results of simulations, where nondifferential and differential variations of these designed frequency filters are compared. Finaly, it has been selected some variants of designs, which has been manufactured, then measured out and resulet has been compare between each other.

Cílem diplomové práce je vytvoření 2D numerického modelu pohybujícího se řezu s proměnnými okrajovými podmínkami skutečné geometrie plynulého odlévání a chlazení předlitku v prostředí MATLAB. Model se zabývá vysoce nelineárními termofyzikálními podmínkami oceli během tuhnutí a chlazení. V práci je simulovaná nejen nelinearita termofyzikálních podmínek, ale také nelinearita při fázové změně. Fázová změna je modelovaná pomocí metody entalpie, metody zdánlivé kapacity a metody teplotního zotavení. Všechny výsledky práce jsou porovnány z více hledisek, jako např. z hlediska přesnosti, rychlosti výpočtu, nebo vhodnosti časového diskretizačního kroku pro nelineární problémy, a paralelizace.

Partial differential equations solution and methods for transformation to a large sets of ordinary equations is described in this work. Taylor series method is important for this work. This method needs higher derivatives for correct work. Ways how to compute higher derivatives are also discused in this work.