Log in

Relevant bibliographies by topics / Different mills / Journal articles

To see the other types of publications on this topic, follow the link: Different mills.

Journal articles on the topic 'Different mills'

Author: Grafiati

Published: 3 June 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Different mills.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Ko, Won Il, and Fanxing Gao. "Economic Analysis of Different Nuclear Fuel Cycle Options." Science and Technology of Nuclear Installations 2012 (2012): 1–10. http://dx.doi.org/10.1155/2012/293467.

Full text

Abstract:

An economic analysis has been performed to compare four nuclear fuel cycle options: a once-through cycle (OT), DUPIC recycling, thermal recycling using MOX fuel in a pressurized water reactor (PWR-MOX), and sodium fast reactor recycling employing pyroprocessing (Pyro-SFR). This comparison was made to suggest an economic competitive fuel cycle for the Republic of Korea. The fuel cycle cost (FCC) has been calculated based on the equilibrium material flows integrated with the unit cost of the fuel cycle components. The levelized fuel cycle costs (LFCC) have been derived in terms of mills/kWh for

APA, Harvard, Vancouver, ISO, and other styles

2

Golubchik, R. M., D. V. Merkulov, E. K. Medvedev, M. V. Chepurin, and I. A. Tatarkin. "Effective broaching in mills of different design." Steel in Translation 41, no. 3 (2011): 243–45. http://dx.doi.org/10.3103/s0967091211030077.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Doria, R. M., and S. Machado. "Yang-Mills Families." JOURNAL OF ADVANCES IN PHYSICS 13, no. 4 (2017): 4927–55. http://dx.doi.org/10.24297/jap.v13i6.6173.

Full text

Abstract:

The Yang-Mills theory structure is based on group theory. It rules the symmetry relationship where the number of potential fields transforming under a same group must be equal to the number of group generators. It defines the group valued expression from where the corresponding non-abelian symmetry properties are derived. Nevertheless based on different origins as Kaluza-Klein, fibre bundles, supersymmetry, s-model , BRST and anti-BRST algorithm, counting degrees of freedom leads to a Yang-Mills extension under the existence of different potential fields rotating under a same single grou

APA, Harvard, Vancouver, ISO, and other styles

4

Alhendi, Abeer S., Tamadher H. Ahmad, Wasan S. Albayati, Balsam Q. Almukhtar, Zahraa K. Ali, and Nuhoodh K. Al-Hayani. "Comparisons between flour qualities produced by three different mills: buhler, quadrumat, and industry mills." International Journal of Food Studies 11, no. 1 (2022): 19–27. http://dx.doi.org/10.7455/ijfs/11.1.2022.a2.

Full text

Abstract:

Three types of mills (Buhler, Quadrumat, and industry mill) have been used to determine the effect of mill type on the quality of the produced flour. Quadrumat and Buhler mills are usually used to produce flour at a laboratory level. Flour quality has been determined physically, chemically, and rheologically. Results showed that the particle size of flour produced by Buhler mill (FPB) was finer (mostly less than 132 μm) than other produced flour, while flour produced by Quadrumat mill (FPQ) had 8% particle size bigger than 50gg, which is more than Iraqi accepted limit (5%). The moisture conten

APA, Harvard, Vancouver, ISO, and other styles

5

Ali, A., M. A. Karim, L. Ali, S. S. Ali, and A. Majid. "Milling Recovery As Influenced By Different Types of Rice Mills." International Rice Research Newsletter 17, no. 2 (1992): 7. https://doi.org/10.5281/zenodo.7218735.

Full text

Abstract:

This article 'Milling Recovery As Influenced By Different Types of Rice Mills' appeared in the International Rice Research Newsletter series, created by the International Rice Research Institute (IRRI). The primary objective of this publication was to expedite communication among scientists concerned with the development of improved technology for rice and for rice based cropping systems. This publication will report what scientists are doing to increase the production of rice in as much as this crop feeds the most densely populated and land scarce nations in the world.

APA, Harvard, Vancouver, ISO, and other styles

6

Khalsa, Jan, Diana Leistner, Nadja Weller, Leilani Darvell та Ben Dooley. "Torreﬁed Biomass Pellets—Comparing Grindability in Different Laboratory Mills". Energies 9, № 10 (2016): 794. http://dx.doi.org/10.3390/en9100794.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Sagdieva, M. G., S. I. Borminskiy, Z. E. Rakhmatullaeva, A. K. Tonkikh, K. S. Sanakulov, and B. Scott. "Biohydrometallurgical Processing of Flotation Tailings from Different Copper Mills." Advanced Materials Research 20-21 (July 2007): 299–303. http://dx.doi.org/10.4028/www.scientific.net/amr.20-21.299.

Full text

Abstract:

Two copper flotation tailings samples, one from the Almalyk Mining and Metallurgical Complex, Uzbekistan (sample designated AMMC) and the other from Whitehorse (WT), Yukon, Canada, were bioleached at laboratory scale. Acidophilic, iron- and sulphur-oxidizing cultures were enriched from the two tailings and these cultures were used for the testing. After 24 weeks of bioleaching in percolator columns 70-72% of the copper was leached from the AMMC tailings and 91-93% of the copper was leached from the WT tailings. The chalcopyritic nature of the copper and larger particle size of the AMMC tailing

APA, Harvard, Vancouver, ISO, and other styles

8

Ema, S., and R. Davies. "Cutting performance of end mills with different helix angles." International Journal of Machine Tools and Manufacture 29, no. 2 (1989): 217–27. http://dx.doi.org/10.1016/0890-6955(89)90033-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Huang, Pan Ling, Jian Feng Li, and Jie Sun. "Simulation and Optimal Selection of Pitch Angles Distribution for Variable Pitch Angles Helix End Mills." Key Engineering Materials 443 (June 2010): 285–90. http://dx.doi.org/10.4028/www.scientific.net/kem.443.285.

Full text

Abstract:

In the paper, a static milling force model for variable pitch mills was built, and the milling forces were simulated. The resultant force and its frequency spectra of variable pitch mills were analyzed compared with that of uniform pitch mills. It is shown that the standard deviation (SD) of frequency spectra amplitudes for variable pitch mills is extremely lower than that of uniform pitch mills. Through simulation for SD of frequency spectra amplitudes affected by the different cutting parameters, a pitch angles distribution of variable pitch helix end mills with lower SD of frequency spectra

APA, Harvard, Vancouver, ISO, and other styles

10

Maulana, Fajri, Fadhli Fajri, Bunga Putri Febrina, and Dwi Sandri. "Physical Quality Test Of Rice Bran From Different Milling In Tanah Laut District." JURNAL ILMIAH PETERNAKAN TERPADU 12, no. 3 (2024): 210. https://doi.org/10.23960/jipt.v12i3.p210-219.

Full text

Abstract:

This research aims to determine the physical quality of rice bran from different mills in Tanah Laut Regency. Data were collected in this research by means of observation and interviews at five different mills in Tanah Laut, namely Panyipatan, Bumi Makmur, Takisung, Kurau and Pelaihari Districts. Data collection was continued with analysis of the physical quality of the bran in the laboratory. Data was processed manually and analyzed descriptively. The parameters measured for the physical quality of rice bran are water content, pile density, pile compaction density, pile angle and specific gra

APA, Harvard, Vancouver, ISO, and other styles

11

Putri, Ayu Sang, Novi Rosanti, and Yuliana Saleh. "ANALISIS KINERJA PENGGILINGAN PADI PADA BERBAGAI SKALA USAHA STUDI KASUS DI KECAMATAN BUAY MADANG TIMUR KABUPATEN OKU TIMUR PROVINSI SUMATERA SELATAN." Jurnal Ilmu-Ilmu Agribisnis 12, no. 2 (2024): 117. http://dx.doi.org/10.23960/jiia.v12i2.7314.

Full text

Abstract:

This research aims to analyze the process of procuring raw materials and the performance of rice mills at different business scales in East Buay Madang District. This research used a case study method on rice mills with different business scales in East Buay Madang District, East OKU Regency, South Sumatra. The rice mill owner was the respondent in this research. Data collection was carried out from March to April 2021. The data analysis method used was descriptive qualitative and quantitative analysis. The results showed that the procurement of raw materials for rice mills at different busine

APA, Harvard, Vancouver, ISO, and other styles

12

He, Y., and Zheng Qiang Yao. "Comparative Experiments for Different End Mills of Indexable Inserts with 3-D Chip Breaker." Materials Science Forum 471-472 (December 2004): 775–78. http://dx.doi.org/10.4028/www.scientific.net/msf.471-472.775.

Full text

Abstract:

End mills are very widely used in machining metal. In this paper, based on analysis of three different end milling indexable inserts with 3-D chip breaker, the influence of different chip breaker on cutting force, chip deformation and machined accuracy are studied by comparative experiments. The results show that the cutting effect of end mills with indexable inserts can be improved by optimization of 3-D chip breaker and suitable for different machining condition.

APA, Harvard, Vancouver, ISO, and other styles

13

Liu, Xiaochan, Yong Zang, Zhiying Gao, and Lingqiang Zeng. "Time Delay Effect on Regenerative Chatter in Tandem Rolling Mills." Shock and Vibration 2016 (2016): 1–15. http://dx.doi.org/10.1155/2016/4025650.

Full text

Abstract:

The interstand tension coupling effect and strip gauge variation passed on to next stand with time delay are the main causes for regenerative chatter in tandem rolling mills. To study the effect of different factors on the stability of tandem rolling mills, different models considering different interstand factors were built. Through stability analysis of these models by employing the Lyapunov indirect method and integral criterion, more detailed and quantitative explanation is put forward to regenerative chatter mechanism in rolling. To study the time delay effect as a single factor on the st

APA, Harvard, Vancouver, ISO, and other styles

14

Kumar, Arvind, Rina Sahu, and Sunil Kumar Tripathy. "Energy-Efficient Advanced Ultrafine Grinding of Particles Using Stirred Mills—A Review." Energies 16, no. 14 (2023): 5277. http://dx.doi.org/10.3390/en16145277.

Full text

Abstract:

The present literature review explores the energy-efficient ultrafine grinding of particles using stirred mills. The review provides an overview of the different techniques for size reduction and the impact of energy requirements on the choice of stirred mills. It also discusses the factors, including the design, operating parameters, and feed material properties, influencing the grinding performance. The review concludes that stirred mills have significant potential for achieving the energy-efficient ultrafine grinding of particles. Stirred mills have unique designs and operations, which prov

APA, Harvard, Vancouver, ISO, and other styles

15

Min, Li, Biao Bai, Yu Hou Wu, and De Hong Zhao. "Efficient NC Tool Path Planning Based on the Subdivision of Sculptured Surface." Applied Mechanics and Materials 635-637 (September 2014): 497–501. http://dx.doi.org/10.4028/www.scientific.net/amm.635-637.497.

Full text

Abstract:

In this paper, we have presented a method to generate efficient NC tool paths based on the surface subdivision. The main objective is to achieve high efficiency in the machining of sculptured surface. The NC machining efficiency can be improved by segmenting the whole surface into distinct areas according to the characters of sculptured surface and by using different size mills and different tool path planning methods to machine the areas. The iso-parametric method and large mills are used in the curvature changing little areas. While the iso-scallop method and small mills are used in curvatur

APA, Harvard, Vancouver, ISO, and other styles

16

ZHAO, WEN. "STATEFINDER DIAGNOSTIC FOR THE YANG–MILLS DARK ENERGY MODEL." International Journal of Modern Physics D 17, no. 08 (2008): 1245–54. http://dx.doi.org/10.1142/s0218271808012796.

Full text

Abstract:

We study the statefinder parameters in the Yang–Mills condensate dark energy models, and find that the evolving trajectories of these models are different from those of other dark energy models. We also define two eigenfunctions of the Yang–Mills condensate dark energy models. The values of these eigenfunctions are quite close to zero if the equation of state of the Yang–Mills condensate is not far from -1, which can be used to simply differentiate between the Yang–Mills condensate models and other dark energy models.

APA, Harvard, Vancouver, ISO, and other styles

17

Trcka, Tomas, Ales Polzer, and Josef Sedlak. "END MILLS WITH PCD INSERTS SHARPENED BY DIFFERENT ELECTRICAL TECHNOLOGIES." MM Science Journal 2018, no. 01 (2018): 2192–97. http://dx.doi.org/10.17973/mmsj.2018_03_201759.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Ulusoy, Ugur, and M. Yekeler. "Dynamic image analysis of calcite particles created by different mills." International Journal of Mineral Processing 133 (December 2014): 83–90. http://dx.doi.org/10.1016/j.minpro.2014.10.006.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Panigrahy, P. K., G. Goswami, J. D. Panda, and R. K. Panda. "Differential comminution of gypsum in cements ground in different mills." Cement and Concrete Research 33, no. 7 (2003): 945–47. http://dx.doi.org/10.1016/s0008-8846(02)00992-4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Pasechnik, Roman, and Michal Šumbera. "Different Faces of Confinement." Universe 7, no. 9 (2021): 330. http://dx.doi.org/10.3390/universe7090330.

Full text

Abstract:

In this review, we provide a short outlook of some of the current most popular pictures and promising approaches to non-perturbative physics and confinement in gauge theories. A qualitative and by no means exhaustive discussion presented here covers such key topics as the phases of QCD matter, the order parameters for confinement, the central vortex and monopole pictures of the QCD vacuum structure, fundamental properties of the string tension, confinement realisations in gauge-Higgs and Yang–Mills theories, magnetic order/disorder phase transition, among others.

APA, Harvard, Vancouver, ISO, and other styles

21

Akhtar, Dr Pervez, and Dr Iqbal Shah. "CORPORATE SOCIAL RESPONSIBILITY: A COMPARATIVE STUDY OF CSR PRACTICES IN TOBACCO AND SUGAR MILLS SECTOR INDUSTRIES OF KHYBER PAKHTUNKHWA." International Journal of Management & Entrepreneurship Research 1, no. 2 (2020): 59–70. http://dx.doi.org/10.51594/ijmer.v1i2.6.

Full text

Abstract:

Aim of the study was to find out and compare the level of understanding and practices of CSR in the two different sectors of economy in Khyber Pakhtunkhwa. Purpose of the study was to find out and compare the understanding of corporate social responsibility in these two different types of large scale industries of Khyber Pakhtunkhwa. That is, how well the management of the Tobacco sector and Sugar mills industry understands the CSR phenomena and how effective are their CSR practices. The study was restricted to the highest managers by using open and pre-structured questionnaire. The qualitativ

APA, Harvard, Vancouver, ISO, and other styles

22

BENAOUM, H. B., and M. LAGRAA. "Uq(2) YANG–MILLS THEORY." International Journal of Modern Physics A 13, no. 04 (1998): 553–68. http://dx.doi.org/10.1142/s0217751x98000238.

Full text

Abstract:

A Yang–Mills theory is presented using the Uq(2) quantum group. Unlike previous works, no assumptions are required — between the quantum gauge parameters and the quantum gauge fields (or curvature) — to get the quantum gauge variations of the different fields. Furthermore, an adequate definition of the quantum trace is presented. Such a definition leads to a quantum metric, which therefore allows us to construct a Uq(2) quantum Yang–Mills Lagrangian. The Weinberg angle θ is found in terms of this q metric to be [Formula: see text].

APA, Harvard, Vancouver, ISO, and other styles

23

Jirasuwankul, Nirudh, and C. Manop. "Mathematical Modeling of Energy Efficiency in Thai Sugar Mills: a Case Study of Different Production Scales from Three Mills." International Journal on Engineering Applications (IREA) 13, no. 1 (2025): 68. https://doi.org/10.15866/irea.v13i1.24530.

Full text

APA, Harvard, Vancouver, ISO, and other styles

24

HART, PETER W. "Differences in bleaching responses from fungal- versus bacterial-derived enzymes." March 2012 11, no. 3 (2012): 21–27. http://dx.doi.org/10.32964/tj11.3.21.

Full text

Abstract:

Several mills in North America have been successful in using xylanase enzymes expressed from Trichoderma reesei (a fungus) as part of their bleaching sequence for many years. These mills process hardwood and softwood species, with and without oxygen delignification. These mills also use three-, four-, and five-stage bleaching sequences. North American mills tend to report increased pulp brightness ceilings and decreased bleaching costs as benefits associated with the application of enzymes in the bleaching process. Laboratory testing suggests that eucalyptus pulp is highly susceptible to funga

APA, Harvard, Vancouver, ISO, and other styles

25

Lieberman, Yu L., and V. A. Shterenson. "THE USE OF DIAMOND-LIKE FILMS TO INCREASE THE DURABILITY OF END MILLS." Spravochnik. Inzhenernyi zhurnal, no. 278 (May 2020): 40–44. http://dx.doi.org/10.14489/hb.2020.05.pp.040-044.

Full text

Abstract:

Modern engineering is focused on high-tech reliable automated equipment, the use of which is effective in the presence of high-quality wear-resistant tools. The article discusses the results of the study DLC-films end mills resistance in structural carbon and alloy steels processing. Coatings were obtained by cathodic pulse sputtering of graphite in a vacuum chamber. There are presented results of the study of the influence of diamond-like (DLC) films on the end mills wear resistance. It is shown that the application of diamond-like films on the end mills uniquely increases the resistance of t

APA, Harvard, Vancouver, ISO, and other styles

26

Lieberman, Yu L., and V. A. Shterenson. "THE USE OF DIAMOND-LIKE FILMS TO INCREASE THE DURABILITY OF END MILLS." Spravochnik. Inzhenernyi zhurnal, no. 278 (May 2020): 40–44. http://dx.doi.org/10.14489/hb.2020.05.pp.040-044.

Full text

Abstract:

Modern engineering is focused on high-tech reliable automated equipment, the use of which is effective in the presence of high-quality wear-resistant tools. The article discusses the results of the study DLC-films end mills resistance in structural carbon and alloy steels processing. Coatings were obtained by cathodic pulse sputtering of graphite in a vacuum chamber. There are presented results of the study of the influence of diamond-like (DLC) films on the end mills wear resistance. It is shown that the application of diamond-like films on the end mills uniquely increases the resistance of t

APA, Harvard, Vancouver, ISO, and other styles

27

Hossain, Md Mosharaf, Abu Sayed Md Abdul Hannan, Md Mostofa Kamal, Mohammad Abul Hossain, and Sharmin Zaman. "Determination of Heavy Metals (Pb, Cd) and Evaluation of Commercially Produced Broiler Feed Available in Bangladesh." European Journal of Agriculture and Food Sciences 4, no. 4 (2022): 6–10. http://dx.doi.org/10.24018/ejfood.2022.4.4.511.

Full text

Abstract:

The study was conducted to evaluate the quality of ready-made broiler feed (starter and grower) procured from seven different feed mills of five divisions of Bangladesh. Seven feed mills were selected randomly from the different region of Bangladesh. Broiler starter and grower feed were collected from each of the feed mills by purchasing method for assessing the heavy metal contents i.e., Pb and Cd in this study. A total of 210 feed samples (105 starter and 105 grower) was collected from the selected feed mills and analyzed to determine the concentration of toxic metals (Pb, Cd) in feed materi

APA, Harvard, Vancouver, ISO, and other styles

28

Voiloshnikov, G. I., and A. Yu Chikin. "Stirred media mills of fine and ultrafine grinding for subsequent beneficiation operations." iPolytech Journal 28, no. 3 (2024): 504–12. http://dx.doi.org/10.21285/1814-3520-2024-3-504-512.

Full text

Abstract:

This paper presents a brief review of the designs, characteristics, and operating parameters of Stirred media mills supplied by foreign manufacturers. An analysis of information on Stirred media mills , which are used to improve the efficiency of beneficiation and metallurgical operations, is carried out using available publications. The obtained results indicate the inexpediency of using conventional drum ball mills for flotation separation of ores and concentrates with a fine interpenetration of minerals. The application of conventional mills in extraction of ores and concentrates resistant

APA, Harvard, Vancouver, ISO, and other styles

29

POPOWICZ, ZIEMOWIT. "THE SUPERSYMMETRIC GAUGE FIELD COPIES." Modern Physics Letters A 02, no. 11 (1987): 861–68. http://dx.doi.org/10.1142/s0217732387001099.

Full text

Abstract:

The examples of Wu-Yang ambiguity in the supersymmetric Yang-Mills theory are given. We describe two different manners of copying the superconnection for the N = 1, N = 3 supersymmetric SU(2) Yang-Mills field theory, providing the same field strength superfield tensor.

APA, Harvard, Vancouver, ISO, and other styles

30

Orlov, G. A., A. G. Orlov, and E. A. Kungurov. "A review of pipes reduction methods aimed at end longitudinal different-walled decreasing." Ferrous Metallurgy. Bulletin of Scientific , Technical and Economic Information 75, no. 1 (2019): 86–94. http://dx.doi.org/10.32339/0135-5910-2019-1-86-94.

Full text

Abstract:

Formation of incrassate pipes end is one of main drawbacks of pipes reducing with tensioning method. Therefore, the matter of perfection of reducing mills designs, rollers passes, rolling regimes aimed at end shearing decreasing is very actual. A review of steel pipes hot rolling methods at multi-stand reduction-tensioning mills was carried out, aimed at elaborating of measures for decreasing of end longitudinal different-walled. Techniques of pipe end parts rolling considered, including control of rotary speed regimes of adjacent stands rollers; changing of distance between stands; increasing

APA, Harvard, Vancouver, ISO, and other styles

31

Kuroda, Kouichi, Takashi Kuboki, Masayoshi Akiyama, and Chihiro Hayashi. "A Study on the Direct Applicability of a Set of Grooves of Multi-Roll Wire Mills for Different Materials." Journal of Manufacturing Science and Engineering 123, no. 2 (2000): 272–78. http://dx.doi.org/10.1115/1.1360695.

Full text

Abstract:

Investigations were carried out on the direct applicability of a set of grooves of multi-roll wire mills for different materials having different stress-strain curves. Special evaluation was made on the stability of the geometry among different materials when rolled under the same mill setting conditions. Influence of inter-stand tension generated by the change in roll force due to the difference in stress-strain curve was studied both numerically and experimentally. A group of three-roll and four-roll-type mills is superior to two-roll-type mill in getting rid of the time for mill setting.

APA, Harvard, Vancouver, ISO, and other styles

32

Dubinina, A. A., T. M. Popova, S. O. Lenert, and V. S. Hershun. "COMPLEX ASSESSMENT OF QUALITY OF FRUITS OF MILLS OF DIFFERENT VARIETIES." Scientific notes of Taurida National V.I. Vernadsky University. Series: Technical Sciences 2, no. 2 (2020): 105–10. http://dx.doi.org/10.32838/2663-5941/2020.2-2/18.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Trcka, Tomas, Ales Polzer, and Josef Sedlak. "SHOULDER END MILLS WITH PCD INSERTS SHARPENED BY DIFFERENT ELECTRICAL TECHNOLOGIES." MM Science Journal 2018, no. 04 (2018): 2536–42. http://dx.doi.org/10.17973/mmsj.2018_11_201822.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Dall'Olio, Pietro. "Dyson-Schwinger equations for IR Yang-Mills theory in different dimensions." Journal of Physics: Conference Series 378 (August 10, 2012): 012037. http://dx.doi.org/10.1088/1742-6596/378/1/012037.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Basiouny, M., and A. El-Yamani. "PERFORMANCE EVALUATION OF TWO DIFFERENT HAMMER MILLS FOR GRINDING CORN COBS." Journal of Soil Sciences and Agricultural Engineering 7, no. 1 (2016): 77–87. http://dx.doi.org/10.21608/jssae.2016.39322.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Kovelenov, N. Yu, S. V. Bolotskikh, S. V. Mikhailov, and A. S. Mikhailov. "Wear resistance of hard-alloy disk mills with different flank geometry." Russian Engineering Research 37, no. 2 (2017): 144–47. http://dx.doi.org/10.3103/s1068798x17020125.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Campo, F., and Jairo A. Escobar Gutiérrez. "2D Model for Ball Mills." Materials Science Forum 530-531 (November 2006): 282–85. http://dx.doi.org/10.4028/www.scientific.net/msf.530-531.282.

Full text

Abstract:

This work develops a mathematical model that explains the ball mills operational speed. The scope of the model is defined by the powder as the number of particles per cm3 and the Relevance defined as the ratio between different forces. In this study, the Relevance is defined as the ratio between superficial tension and inertial forces. The conditions for a free flowing powder and a single particle are differenced and non-dimensional numbers are found. The model proposed use the friction force between mill walls and the powder mass is related by a friction coefficient that can be calculated fro

APA, Harvard, Vancouver, ISO, and other styles

38

Fragnière, Greta, Aleksandra Naumann, Marcel Schrader, Arno Kwade, and Carsten Schilde. "Grinding Media Motion and Collisions in Different Zones of Stirred Media Mills." Minerals 11, no. 2 (2021): 185. http://dx.doi.org/10.3390/min11020185.

Full text

Abstract:

Product fineness during grinding in stirred media mills is mainly influenced by the specific energy input, the stress energy transferred by the colliding grinding media and the stress frequency. The stress energy from grinding media collisions is heterogeneously distributed in stirred media mills. Herein, in order to characterize the stress energy distribution and the local grinding media collision frequencies, the grinding media motion was calculated using discrete element method (DEM) simulations coupled with computational fluid dynamics (CFD). The local grinding media concentration, velocit

APA, Harvard, Vancouver, ISO, and other styles

39

Zhao, Lin Hui, Jian Cheng Zhang, and Wei Su. "Research on Tool Wear Form in Micro Turn-Milling Process." Applied Mechanics and Materials 184-185 (June 2012): 663–67. http://dx.doi.org/10.4028/www.scientific.net/amm.184-185.663.

Full text

Abstract:

In micro machining, turn-milling tool wear is a key factor for part surface quality. This paper carries on experiments on end mills wear in micro turn-milling machining, aiming to research the wear form and provide some reference data for developing wear standard of small diameter end mills. To measure wear condition of end mills, machine vision technique is utilized. This paper designs and sets up an online end mill wear measurement system for a micro turn-milling process center. With a series of experiments on small diameter end mills, wear conditions of different cutting positions are resea

APA, Harvard, Vancouver, ISO, and other styles

40

OH, SUNG-JIN. "GAUGE CHOICE FOR THE YANG–MILLS EQUATIONS USING THE YANG–MILLS HEAT FLOW AND LOCAL WELL-POSEDNESS IN H1." Journal of Hyperbolic Differential Equations 11, no. 01 (2014): 1–108. http://dx.doi.org/10.1142/s0219891614500015.

Full text

Abstract:

We introduce a novel approach to the problem of gauge choice for the Yang–Mills equations on the Minkowski space ℝ1+3, which uses the Yang–Mills heat flow in a crucial way. As this approach does not possess the drawbacks of the previous approaches, it is expected to be more robust and easily adaptable to other settings. As a first application, we give an alternative proof of the local well-posedness of the Yang–Mills equations for initial data [Formula: see text], which is a classical result of Klainerman and Machedon (1995) that had been proved using a different method (local Coulomb gauges).

APA, Harvard, Vancouver, ISO, and other styles

41

Sarwar, Muhammad, Warda Muzaffar, and Waqas Raza Arshad. "EVALUATION OF PROMISING AND COMMERCIAL SUGARCANE CLONES AT DIFFERENT LOCATIONS IN THAL AND SOUTHERN PUNJAB." Pakistan Sugar Journal 34, no. 3 (2020): 16–22. http://dx.doi.org/10.35380/sugar.034.03.0148.

Full text

Abstract:

Topographical areas better adapted for sugar cane cultivation must be identified and preserved, for this study Indus valley river delta in South Punjab represents promising features for prosperous sugarcane cultivation (lower water pumping costs due to higher water tables, sugarcane being flood resistant crop in Pakistan. Eight sugarcane varieties and eight promising clones were grown on different locations in Punjab at farmer’s field using RCBD with three replications. The objective of this study is to evaluate varieties under different ecological zones. These clones were tested for their pro

APA, Harvard, Vancouver, ISO, and other styles

42

MUSAYEV, S. "ON THE EQUILIBRIUM DISTRIBUTION OF THE STOCHASTICALLY QUANTIZED YANG-MILLS THEORY." Modern Physics Letters A 09, no. 13 (1994): 1213–19. http://dx.doi.org/10.1142/s0217732394001039.

Full text

Abstract:

The structure of the stochastically quantized Yang-Mills theory with the Zwanziger gauge fixing term in the equilibrium limit is explored. The theory turns out to be extremely sophisticated and includes an infinite number of nonlocal vertices. It is the quantum Yang-Mills theory in the gauge different from the ones familiar to us.

APA, Harvard, Vancouver, ISO, and other styles

43

Liu, Jiancheng, Feng Shi, Yecheng Sun, and Peng Li. "An ADS-Based Sparse Optimization Method for Sonar Imaging Sensor Arrays." Applied Sciences 10, no. 9 (2020): 3176. http://dx.doi.org/10.3390/app10093176.

Full text

Abstract:

The Mills Cross sonar sensor array, achieved by the virtual element technology, is one way to build a low-complexity and low-cost imaging system while not decreasing the imaging quality. This type of sensor array is widely investigated and applied in sensor imaging. However, the Mills Cross array still holds some redundancy in sensor spatial sampling, and it means that this sensor array may be further thinned. For this reason, the Almost Different Sets (ADS) method is proposed to further thin the Mills Cross array. First, the original Mills Cross array is divided into several transversal linea

APA, Harvard, Vancouver, ISO, and other styles

44

Karmazina, Iryna, Volodymyr Kukhar, Elena Balalayeva, Alla Larkina, and Valentina Kashintseva. "Experimental methodology for tinplate rolling on a laboratory mill." E3S Web of Conferences 110 (2019): 01001. http://dx.doi.org/10.1051/e3sconf/201911001001.

Full text

Abstract:

The review of cold rolling mills used for the production of tinplate and thin tinplate in the world is presented. World tinplate production is characterized by the desire to reduce the thickness of its steel base. In connection with the variety of tinplate rolling mills, peculiarities of the deformation conditions of thin tinplate, complexity of the technological process and theoretical prediction of the rolling process indices, especially in terms of the theoretical model universality, as well as paucity of existing practical data, the necessity of experimental research is substantiated. Expe

APA, Harvard, Vancouver, ISO, and other styles

45

Demidov, A. V., and I. A. Muraveiko. "The experience of modernization of mills of wet wire drawing for the metal wire cord." Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY), no. 4 (January 14, 2019): 97–102. http://dx.doi.org/10.21122/1683-6065-2018-4-97-102.

Full text

Abstract:

There is a tendency in recent years to use by the world’s leading manufacturers of tires metal wires of small diameter (0,175– 0,20 mm) with higher strength, which requires the use of increased total number of extracts on wet drawing. The possibility of increasing the compression can be limited not only by the ductility of the processed metal, but also by the design of the existing drawing mills, in particular, by the insufficient total passport kinematic drawing and, as a consequence, to the excessive sliding of the wire relative to the drawing washers. Results of modernization of mills of di

APA, Harvard, Vancouver, ISO, and other styles

46

Han, Sheng Chao, Yan Chen, Jiu Hua Xu, and Jing Wen Zhou. "Experimental Study of Tool Wear in Milling Multidirectional CFRP Laminates." Materials Science Forum 770 (October 2013): 276–80. http://dx.doi.org/10.4028/www.scientific.net/msf.770.276.

Full text

Abstract:

This study aims to investigate the wear of coated end mills when milling Carbon fiber reinforced polymer (CFRP) composites. Four different types of end mills are used in the milling experiments to identify the influence of tool geometry and material on tool wear. Cutting forces and wear mechanisms of coated mills are also discussed. Through the contrast experiment, diamond coated multitooth router shows the best performance with the smallest cutting force and the least wear extent under the same cutting parameter. The major failure mechanisms of coated tools are breakthrough of coating, coatin

APA, Harvard, Vancouver, ISO, and other styles

47

Shpylovyi, K. L., L. V. Shpylovyi, V. S. Biletskyi, and O. I. Komarova. "TECHNIQUE AND TECHOLOGY OF RARE-METAL ORES DESINTEGRATION AND GRAVITY-BASED BENEFICATION." ACADEMIC JOURNAL Series: Industrial Machine Building, Civil Engineering 1, no. 48 (2017): 273–89. http://dx.doi.org/10.26906/znp.2017.48.811.

Full text

Abstract:

On the base of the analysis of centrifugal concentrators designs there has been justified the selection of apparatus for the rare-metal ores benefication. Process of pyrochlore ore grinding in mills of different types has been investigated and the expediency of use of impact-centrifugal action mills to ensure selectivity of minirals disclosure has been founded. Efficient technical and technological parameters of the centrifugal action mills have been justified on the base of active experimental method. The influence of disintegration metheds on technologival indication of rare-metal ore benefi

APA, Harvard, Vancouver, ISO, and other styles

48

Alvarez, Juan, Steffen Porwollik, Idoia Laconcha, et al. "Detection of a Salmonella enterica Serovar California Strain Spreading in Spanish Feed Mills and Genetic Characterization with DNA Microarrays." Applied and Environmental Microbiology 69, no. 12 (2003): 7531–34. http://dx.doi.org/10.1128/aem.69.12.7531-7534.2003.

Full text

Abstract:

ABSTRACT We performed an epidemiological study on Salmonella isolated from raw plant-based feed in Spanish mills. Overall, 32 different Salmonella serovars were detected. Despite its rare occurrence in humans and animals, Salmonella enterica serovar California was found to be the predominant serovar in Spanish feed mills. Different typing techniques showed that isolates of this serovar were genetically closely related, and comparative genomic hybridization using microarray technology revealed 23 S. enterica serovar Typhimurium LT2 gene clusters that are absent from serovar California.

APA, Harvard, Vancouver, ISO, and other styles

49

Ali, Sabah, and Hiba Alwan. "Measurements of Vibration and Noise Level at Different Cement Companies." Tikrit Journal of Engineering Sciences 27, no. 2 (2020): 14–21. http://dx.doi.org/10.25130/tjes.27.2.02.

Full text

Abstract:

The aim of this article is to compare Vibration and Noise measurements caused by different types of Machines at cement factories with the standard evaluation criteria of Vibration ISO 2631 – 4 EVS – EN 5349 – 2 and Noise following the standard ISO 9612 – 2009. Two cement companies were chosen, the first is located at Baddish district, 30km west of Mosul city (Iraq), which is called Baddish general cement company, while the other is located south of Mosul, and is called Hammam Al-Alil general cement company. Three stations were chosen for each company (raw materials grinding mills, cement grind

APA, Harvard, Vancouver, ISO, and other styles

50

Koda, Risa, Hiroshi Usuki, Masahiro Yoshinobu, et al. "Effect of Work Material’s Hardness on Cutting Performance of TiAlN- and CrAlN-Coated Cutting Tools." Key Engineering Materials 656-657 (July 2015): 231–36. http://dx.doi.org/10.4028/www.scientific.net/kem.656-657.231.

Full text

Abstract:

For better selection of coated cutting tools, TiAlN (Ti50Al50N) and CrAlN (Cr50Al50N) coatings were deposited onto ball-nose and square end mills using arc evaporation, and their cutting performances were evaluated using steel workpieces of various hardnesses. In particular, cutting tests were performed on three types of workpieces, made from S50C, SKD61, and SKD11 steels, having Brinell hardness numbers of HB220, HRC40, and HRC60, respectively. The results of the cutting experiments were elucidated and discussed in terms of the mechanical properties and anti-oxidation resistances of the diffe

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!