Relevant bibliographies by topics / Differential scanning calorimetry pressure (PDSC)

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers

Academic literature on the topic 'Differential scanning calorimetry pressure (PDSC)'

Author: Grafiati
Published: 4 June 2021
Last updated: 12 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Differential scanning calorimetry pressure (PDSC).'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Differential scanning calorimetry pressure (PDSC)"

1

Zeman, Alfred, Volker Becker, and Kai Peper. "Deposit formation in aero engines—investigation by pressure differential scanning calorimetry (PDSC)." Thermochimica Acta 219 (May 1993): 305–13. http://dx.doi.org/10.1016/0040-6031(93)80507-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Li, H. W., Kazuhiro Ishikawa, and Kiyoshi Aoki. "Hydrogen-Induced Amorphization in C15 Laves Phase DyCo2 Studied by Pressure Calorimetry." Materials Science Forum 475-479 (January 2005): 2469–72. http://dx.doi.org/10.4028/www.scientific.net/msf.475-479.2469.

Full text
Abstract:
Structural changes in C15 Laves phase DyCo2 on heating using a pressure differential scanning calorimeter (PDSC) in a hydrogen atmosphere between 0.1 and 5.0 MPa were investigated by a powder X-ray diffractometer (XRD), a differential scanning calorimeter under an argon flow atmosphere (Ar-DSC), a transmission electron microscope (TEM) and a hydrogen analyzer. As the temperature of DyCo2 increases, the reactions such as hydrogen absorption in a crystalline state, HIA (hydrogen-induced amorphization), precipitation of DyH3 and decomposition of the remaining amorphous phase into β-Co + DyH3 occu
APA, Harvard, Vancouver, ISO, and other styles
3

Zeman, Alfred, and Heinz Peter Binder. "Determination of spontaneous ignition temperatures (SITs) of aviation lubricants using pressure differential scanning calorimetry (PDSC)." Thermochimica Acta 98 (February 1986): 159–65. http://dx.doi.org/10.1016/0040-6031(86)87085-x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

He, Zhong Yi, Li Ping Xiong, Huan Xu, Tao Li, Jian Wei Qiu, and Xi Sheng Fu. "Tribological and Oxidation Properties Study of a Kind of Sodium Sulfonate-Modified Nano Carbonate Sodium." Advanced Materials Research 146-147 (October 2010): 1605–11. http://dx.doi.org/10.4028/www.scientific.net/amr.146-147.1605.

Full text
Abstract:
The tribological properties of a high base value sodium sulfonate-modified nano carbonate sodium as lubricating oil additive were introduced in this paper, and its antioxidant collaboration property with ashless antioxidant was evaluation by using pressure differential scanning calorimetry(PDSC). The results show that the product possesses good tribological properties, thermal stability, and a good synergistic antioxidation effect with ashless antioxidant, and mainly to increase oxidation free energy of base oil.
APA, Harvard, Vancouver, ISO, and other styles
5

Piasecka, Iga, Agata Górska, Ewa Ostrowska-Ligęza, and Stanisław Kalisz. "The Study of Thermal Properties of Blackberry, Chokeberry and Raspberry Seeds and Oils." Applied Sciences 11, no. 16 (2021): 7704. http://dx.doi.org/10.3390/app11167704.

Full text
Abstract:
The seeds of berry fruits are a component of fruit waste occurring in the production process. Circular economy rules focus on decreasing the amount of waste produced and reusing by-products when it is possible. To determine the possible applications of the studied fruit industry wastes, the thermal properties of berry seeds and of oil extracted from the tested material were examined. Differential scanning calorimetry (DSC), modulated differential scanning calorimetry (MDSC), and thermogravimetry (TG) of blackberry, chokeberry, and raspberry seeds were carried out. The properties of oil extract
APA, Harvard, Vancouver, ISO, and other styles
6

Basken, A., A. Zeman, and K. Maier. "Determination of spontaneous ignition temperatures of ester-based aviation lubricants using pressure differential scanning calorimetry (PDSC)." Journal of Synthetic Lubrication 15, no. 1 (1998): 13–18. http://dx.doi.org/10.1002/jsl.3000150103.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Yang, Yun Feng, Guo Sheng Hu, and Yin Jie Chen. "The Study of Oxidative Stability of Castor Oil Based Biodiesel." Advanced Materials Research 724-725 (August 2013): 334–37. http://dx.doi.org/10.4028/www.scientific.net/amr.724-725.334.

Full text
Abstract:
The oxidative stability of castor oil based biodiesel, added different antioxidant, was studied systematacially through pressure differential scanning calorimetry (PDSC), accelerated oxidation test, constant temperature method, programmed temperature method. The result shows after adding antioxidant in castor oil, the generation of hyperoxide and acid value were suffocated for the biodiesel. When the content of antioxidant 300 was 0.6 wt.%, the initiation oxide temperature raised to 197.7°C, the acid value reduced to 1.41, the solubility of oxide reduced to 1.40mg/100mL, and the activity energ
APA, Harvard, Vancouver, ISO, and other styles
8

Kodali, Dharma R. "Oxidative Stability Measurement of High-Stability Oils by Pressure Differential Scanning Calorimeter (PDSC)." Journal of Agricultural and Food Chemistry 53, no. 20 (2005): 7649–53. http://dx.doi.org/10.1021/jf0511751.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Bryś, Joanna, lnês Filipa Vaz Flores, Agata Górska, et al. "The Synthesis Followed by Spectral and Calorimetric Evaluation of Stability of Human Milk Fat Substitutes Obtained from Thistle Milk and Lard." International Journal of Analytical Chemistry 2019 (May 2, 2019): 1–10. http://dx.doi.org/10.1155/2019/5417962.

Full text
Abstract:
The central point of current investigations was the first time ever synthesis of modern substitutes of human milk fat followed by versatile evaluation of their oxidative properties. The enzymatic interesterification conducted at 70°C for 2, 4, and 6 hours, respectively, with milk thistle oil and lard blend as starting reactants was catalyzed by 1,3-specific lipase Lipozyme RM IM, obtained from Rhizomucor miehei. Pressure Differential Scanning Calorimetry (PDSC) and Fourier Transform Infrared Spectroscopy (FT-IR) were applied to evaluate quality of products formed. Although PDSC curves showed l
APA, Harvard, Vancouver, ISO, and other styles
10

Zglińska, Klara, Tomasz Niemiec, Joanna Bryś, et al. "The combined use of GC, PDSC and FT-IR techniques to characterize fat extracted from commercial complete dry pet food for adult cats." Open Chemistry 18, no. 1 (2020): 1136–47. http://dx.doi.org/10.1515/chem-2020-0146.

Full text
Abstract:
AbstractThis study aims to compare the quality of fat extracted from different priced dry pet food for adult cats through classical and instrumental methods: pressure differential scanning calorimetry (PDSC), Fourier transform infrared spectroscopy (FT-IR) or gas chromatography (GC). Fat extracted from pet food was examined for induction time (IT), fatty acid composition, free fatty acid (FFA) content and peroxide value with the use of PDSC, GC, acid–base and iodometric titration, respectively. FT-IR data from the selected spectral regions correlate with the value of oxidation IT or the conten
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Differential scanning calorimetry pressure (PDSC)"

1

Santos, Anne Gabriella Dias. "Avalia??o da estabilidade t?rmica e oxidativa dos biodieseis de algod?o, girassol, dend? e sebo bovino." Universidade Federal do Rio Grande do Norte, 2010. http://repositorio.ufrn.br:8080/jspui/handle/123456789/17619.

Full text
Abstract:
Made available in DSpace on 2014-12-17T15:41:47Z (GMT). No. of bitstreams: 1 AnneGDS_DISSERT.pdf: 3113468 bytes, checksum: a8146612a95169da2fa541dd638d6763 (MD5) Previous issue date: 2010-02-26<br>The search for new sources of environmentally friendly energy is growing every day. Among these alternative energies, biodiesel is a biofuel that has had prominence in world production. In Brazil, law 11.097, determine that all diesel sold in the country must be made by mixing diesel/biodiesel. The latter called BX, , where X represents the percent volume of biodiesel in the diesel oil, as specifie
APA, Harvard, Vancouver, ISO, and other styles
2

Belkharchouche, Mohamed. "Pressure differential scanning calorimetry studies and its relevance to in-situ combustion." Thesis, University of Salford, 1990. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.280747.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Lee, Jaesung. "Calorimetric and microbiological evaluation of bacteria after exposure to food preservation treatments." Connect to this title online, 2004. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1078597088.

Full text
Abstract:
Thesis (Ph. D.)--Ohio State University, 2004.<br>Title from first page of PDF file. Document formatted into pages; contains xvi, 231 p.; also includes graphics (some col.) Includes bibliographical references (p. 212-224). Available online via OhioLINK's ETD Center
APA, Harvard, Vancouver, ISO, and other styles
4

Pillar, Rachel Joanne, and rachel pillar@flinders edu au. "The Influence of Rolling Oil Decomposition Deposits on the Quality of 55Al-43.4Zn-1.6Si Alloy Coatings." Flinders University. School of Chemistry, Physics and Earth Sciences, 2007. http://catalogue.flinders.edu.au./local/adt/public/adt-SFU20080108.132120.

Full text
Abstract:
Uncoated defects in hot dip metal-coated steel products result from non-wetting of the steel surface by the molten alloy. The occurrence of uncoated defects is highly detrimental to product quality and production efficiency; uncoated defects compromise the appearance and anti-corrosion performance of hot dip metal-coated steel products and causes time delays in the application of subsequent surface treatments. Although many studies have been directed towards evaluating the effect of steel pre-heat temperature and oxidation on the formation of uncoated defects, fewer investigations have analyse
APA, Harvard, Vancouver, ISO, and other styles
5

Batisai, Eustina. "Synthesis and sorption studies of porous metal-organic hosts." Thesis, Stellenbosch : Stellenbosch University, 2013. http://hdl.handle.net/10019.1/79803.

Full text
Abstract:
Thesis (PhD)--Stellenbosch University, 2013.<br>ENGLISH ABSTRACT: The first part of this study describes the synthesis of new porous materials from basic building blocks. Five structurally related ligands namely: N,N'-bis(3-pyridylmethyl)-naphthalene diimide (L1), N,N'-bis(4-pyridylmethyl)-naphthalene diimide (L2), N,N'-bis(4-pyridylmethyl)- pyromellitic diimide (L3), N,N'-bis(3-pyridylmethyl)-pyromellitic diimide (L4) and 2-(pyridin-4- ylmethyl)-benzene tricarboxylic anhydride (L5) were synthesised. Ligands L1 and L2 were reacted with metal nitrates and carboxylates as co-ligands in a sy
APA, Harvard, Vancouver, ISO, and other styles
6

Rosenhaim, Raul. "Avaliação das Propriedades Fluído-dinâmicas e Estudo Cinético por Calorimetria Exploratória Diferencial Pressurizada (PDSC) de Biodiesel Etílico Derivado de óleo de fritura usado." Universidade Federal da Paraí­ba, 2009. http://tede.biblioteca.ufpb.br:8080/handle/tede/7166.

Full text
Abstract:
Made available in DSpace on 2015-05-14T13:21:45Z (GMT). No. of bitstreams: 1 parte1.pdf: 2326464 bytes, checksum: edf040b92b5fdf343007a3626c02e26b (MD5) Previous issue date: 2009-02-19<br>Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPES<br>The present work aimed at investigating the biodiesel issuing from the transesterification of used frying oil with ethanol, via alkaline catalysis. Such investigation covers its thermo-oxidative stability during heating (thermal analysis and rheological properties) as well the kinetic profiles of the samples in the best oxidative in
APA, Harvard, Vancouver, ISO, and other styles
7

Hester, Keith C., Simon R. Davies, Jason W. Lachance, E. Dendy Sloan, and Carolyn A. Koh. "HYDRATE NUCLEATION MEASUREMENTS USING HIGH PRESSURE DIFFERENTIAL SCANNING CALORIMETRY." 2008. http://hdl.handle.net/2429/1136.

Full text
Abstract:
Understanding when hydrates will nucleate has notable importance in the area of flow assurance. Attempts to model hydrate formation in subsea pipelines currently requires an arbitrary assignment of a nucleation subcooling. Previous studies showed that sII hydrate containing a model water-soluble former, tetrahydrofuran, would nucleate over a narrow temperature range of a few degrees with constant cooling. It is desirable to know if gas phase hydrate formers, which are typically more hydrophobic and hence have a very low solubility in water, also exhibit this nucleation behavior. In this study
APA, Harvard, Vancouver, ISO, and other styles
8

Yang, Jie. "Evaluation of hydrostatic pressure and storage effects on Cheddar cheese microstructure by thermal conductivity, differential scanning calorimetry and enzymatic proteolysis." Thesis, 1999. http://hdl.handle.net/1957/26048.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Fabian, June. "Preformulation and formulation study of dexchlorphenniramine maleate for use in the development of a new sustained release dosage form." Thesis, 1994. https://hdl.handle.net/10539/25978.

Full text
Abstract:
A Dissertation Submitted to the Faculty of Medicine, University of the Witwatersrand, Johannesburg, in Partial Fulfilment of the Requirements for the Degree of Master of Pharmacy Johannesburg, March 1994<br>Preformulation and formulation study of dexchlor- pheniramine maleate (DCPM) for it's inclusion into a gelforming sustained release dosage form was investigated. A modification of the USP apparatus 2 is proposed as an alternative to currently recommended USP dissolution apparatus for floating, gelforming drug delivery systems. In addition, the role of magnesium stearate and talc as dissolu
APA, Harvard, Vancouver, ISO, and other styles
10

Dhumal, Ravindra S., Adrian L. Kelly, Peter York, Philip D. Coates, and Anant R. Paradkar. "Cocrystalization and simultaneous agglomeration using hot melt extrusion." 2010. http://hdl.handle.net/10454/5955.

Full text
Abstract:
No<br>PURPOSE: To explore hot melt extrusion (HME) as a scalable, solvent-free, continuous technology to design cocrystals in agglomerated form. METHODS: Cocrystal agglomerates of ibuprofen and nicotinamide in 1:1 ratio were produced using HME at different barrel temperature profiles, screw speeds, and screw configurations. Product was characterized for crystallinity by XRPD and DSC, while the morphology was determined by SEM. Dissolution rate and tabletting properties were compared with ibuprofen. RESULTS: Process parameters significantly affected the extent of cocrystallization which improve
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Differential scanning calorimetry pressure (PDSC)"

1

Belkharchouche, Mohamed. Pressure differential scanning calorimetry studies and its relevance to in-situ combustion. University of Salford, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Applications of heat pressure differential scanning calorimetry to aviation fuel thermal stability research. National Aeronautics and Space Administration, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Yang, Jie. Evaluation of hydrostatic pressure and storage effects on Cheddar cheese microstructure by thermal conductivity, differential scanning calorimetry and enzymatic proteolysis. 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Differential scanning calorimetry pressure (PDSC)"

1

Obuchi, Kaoru. "High Pressure Differential Scanning Calorimetry of Proteins: Attenuation of Peak." In Advances in High Pressure Bioscience and Biotechnology II. Springer Berlin Heidelberg, 2003. http://dx.doi.org/10.1007/978-3-662-05613-4_85.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Lewis, Ruthven N. A. H., and Ronald N. McElhaney. "Differential Scanning Calorimetry (DSC), Pressure Perturbation Calorimetry (PPC), and Isothermal Titration Calorimetry (ITC) of Lipid Bilayers." In Encyclopedia of Biophysics. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-16712-6_557.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Niven, G. W., and B. M. Mackey. "Ribosome Analysis In Vivo by Differential Scanning Calorimetry: The Effects of High Pressure on Escherichia coli." In Advances in High Pressure Bioscience and Biotechnology. Springer Berlin Heidelberg, 1999. http://dx.doi.org/10.1007/978-3-642-60196-5_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Obuchi, Kaoru, and Takashi Yamanobe. "Differential scanning calorimetry of proteins under high pressure." In Progress in Biotechnology. Elsevier, 2002. http://dx.doi.org/10.1016/s0921-0423(02)80159-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Winter, Roland, and Anne Landwehr. "High-Pressure Effects on the Structure and Phase Behavior of Model Membrane Systems." In High Pressure Effects in Molecular Biophysics and Enzymology. Oxford University Press, 1996. http://dx.doi.org/10.1093/oso/9780195097221.003.0021.

Full text
Abstract:
Phospholipids, which provide valuable model systems for lipid membranes, display a variety of polymorphic phases, depending on their molecular structure and on environmental conditions. High hydrostatic pressure has been used as a physical parameter to study the thermodynamic properties and phase behavior of these systems. High pressure is also a characteristic feature of certain natural membrane environments. In the first part of this article, we review our recent work on the temperature- and pressure-dependent phase behavior of phospholipid systems differing in lipid conformation and headgroup structure. In the second part, we report on the determination of the (T, x, p) phase diagrams of binary phospholipid mixtures. An additional section deals with effects of incorporating ions, small amphiphilic molecules, and steroids into the bilayer on the experimental temperature- and pressure-dependent phase behavior of lipid systems. Finally, we discuss lamellar to nonlamellar thermotropic and barotropic phase transformations, which occur for a number of lipids, such as phosphatidylethanolamines, monoacylglycerides, and lipid mixtures. It has been suggested that nonlamellar lipid structures might play an important role as transient and local intermediates in a number of biochemical processes. High-pressure smallangle x-ray (SAXS) and neutron (SANS) scattering, differential scanning calorimetry (DSC), high-pressure differential thermal analysis (DTA), and p, V, T measurements have been used as experimental methods for the investigation of these systems. Lipid bilayer dispersions, in particular the phosphatidylcholines and phosphatidylethanolamines, are the workhorses for the investigation of biophysical properties of membrane lipids because they constitute the basic structural component of biological membranes. They exhibit a rich lyotropic and thermotropic phase behavior (Cevc &amp; Marsh, 1987; Marsh, 1991; Yeagle, 1992). Most fully hydrated saturated phospholipid bilayers exhibit two principal thermotropic lamellar phase transitions, corresponding to a gel to gel (Lβ′–Pβ′) transition and a gel to liquid-crystalline (Pβ′–Lα) main transition at a temperature Tm. In the fluid-like La phase, the hydrocarbon chains of the lipid bilayers are conformationally disordered, whereas in the gel phases the hydrocarbon chains are more extended and relatively ordered.
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Differential scanning calorimetry pressure (PDSC)"

1

Ferguson, Helen A., S. A. Mehta, R. Gordon Moore, Nancy E. Okazawa, and Matthew G. Ursenbach. "Oxidation Characteristics of Light Hydrocarbons for Underbalanced Drilling Applications." In ASME 2002 Engineering Technology Conference on Energy. ASMEDC, 2002. http://dx.doi.org/10.1115/etce2002/cae-29066.

Full text
Abstract:
This investigation is directly relevant to various applications associated with the safety aspects of underbalanced drilling operations where de-oxygenated air may be co-injected with oil-based drilling fluid. However, de-oxygenated air often still contains up to 5% oxygen by volume. This residual oxygen can react with oil during the drilling process, thereby forming potentially hazardous oxidized hydrocarbons and compromising the safety of drilling operations. This article examines the conditions and processes by which oxidation reactions occur and may be helpful in reducing risk in drilling
APA, Harvard, Vancouver, ISO, and other styles
2

Cheenkachorn, Kraipat, Wallis A. Lloyd, and Joseph M. Perez. "Use of Pressurized Differential Scanning Calorimetry (PDSC) to Evaluate Effectiveness of Additives in Vegetable Oil Lubricants." In ASME 2003 Internal Combustion Engine Division Spring Technical Conference. ASMEDC, 2003. http://dx.doi.org/10.1115/ices2003-0657.

Full text
Abstract:
Use of renewable resources to replace petroleum base stocks in lubricants is attractive. Research on additives enhanced by current advances in genetic and chemical modifications has resulted in improved oxidative stability of vegetable oils. Like most oxidation processes, the oxidative degradation of vegetable oils is complex. The auto-oxidation free radical mechanisms and hydroperoxide theories of oxidation have been well studied. Factors that influence the degradation of oils include temperature, surface reactivity, rates of formation of radicals, chemical composition factors such as olefin
APA, Harvard, Vancouver, ISO, and other styles
3

Teeters, D., and N. P. Kemp. "Drilling Fluid Polymer Degradation Studies Using High-Pressure Differential Scanning Calorimetry." In SPE International Symposium on Oilfield Chemistry. Society of Petroleum Engineers, 1989. http://dx.doi.org/10.2118/18478-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Mcnamee, Kevin Patrick. "Evaluation of Kinetic Hydrate Inhibitor Performance by High-Pressure Differential Scanning Calorimetry." In Offshore Technology Conference. Offshore Technology Conference, 2011. http://dx.doi.org/10.4043/21604-ms.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Abaas, Mustafa. "EFFECT OF THE CRUDE OIL COMPOSITION ON THE OXIDATION BEHAVIOR BY HIGH-PRESSURE DIFFERENTIAL SCANNING CALORIMETRY (HP-DSC)." In 18th International Multidisciplinary Scientific GeoConference SGEM2018. Stef92 Technology, 2018. http://dx.doi.org/10.5593/sgem2018/1.4/s06.057.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Yuan, Chengdong. "THE PYROLYSIS BEHAVIOR OF CRUDE OIL SARA FRACTIONS AND THE EFFECT OF PRESSURE ON CHARACTERIZED BY DIFFERENTIAL SCANNING CALORIMETRY (DSC)." In 18th International Multidisciplinary Scientific GeoConference SGEM2018. Stef92 Technology, 2018. http://dx.doi.org/10.5593/sgem2018/1.4/s06.119.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Mourad, Abdel-Hamid I., Omar G. Ayad, Ashfakur Rahman, Ali Hilal-Alnaqbi, and Basim I. Abu-Jdayil. "Experimental Investigation of Kevlar KM2Plus Nano-Reinforced Laminated Composite Thermo-Mechanical Properties." In ASME 2016 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/pvp2016-63857.

Full text
Abstract:
This work is concerned with the synthesis and characterization of Multi-Walled Carbon Nanotube (MWCNT) reinforced Kevlar KM2Plus composites with various MWCNT contents (0.2, 0.3, 0.4, 0.5, 0.6, and 0.8 wt. %), by the wet lay-up technique. These samples were experimentally investigated for their thermo-mechanical properties using Thermo-Gravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), tensile testing and three-point bending techniques. The mechanical properties showed remarkable improvement with increasing MWCNT wt.% up to certain content. The results revealed that the addit
APA, Harvard, Vancouver, ISO, and other styles
8

Melane, Chris, Hein Badenhorst, Luxolo Holo, Eino Vuroinen, Brian Rand, and Walter W. Focke. "Oxidative Stability of Carbon by Thermal Gravimetric Analysis." In ASME 2008 Pressure Vessels and Piping Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/pvp2008-61423.

Full text
Abstract:
The Pebble Bed Modular Reactor (PBMR) is a High Temperature Gas Cooled nuclear Reactor (HTGR) with numerous inherent passive safety features. Graphite is the most important material of construction for the reactor core and the fuel pebbles. PBMR accident scenarios include uncontrolled air ingress into the reactor. Understanding the high temperature behavior of the graphite materials under such conditions is vital for design and accident modeling purposes [1]. Graphitic materials have a very high thermal stability compared to ordinary organics. The high degradation temperatures are beyond the c
APA, Harvard, Vancouver, ISO, and other styles
9

I. Mourad, Abdel-Hamid, Mouza S. Al Mansoori, Lamia A. Al Marzooqi, Farah A. Genena, and Nizamudeen Cherupurakal. "Optimization of Curing Conditions and Nanofiller Incorporation for Production of High Performance Laminated Kevlar/Epoxy Nanocomposites." In ASME 2018 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/pvp2018-85067.

Full text
Abstract:
Kevlar composite materials are getting scientific interest in repairing of oil and gas pipelines in both offshore and onshore due to their unique properties. Curing is one of the major factor in deciding the final mechanical performance of laminated Kevlar/epoxy nanocomposites. The parameters such as curing time, temperature and applied pressure during the hot pressing will affect chemistry of crosslinking of the epoxy matrix and interaction of epoxy with the Kevlar fiber. The present study is carried out to evaluate the optimal curing conditions of the Kevlar/epoxy nanocomposites. Three diffe
APA, Harvard, Vancouver, ISO, and other styles
10

Aiduganov, D., D. Balkaev, M. Varfolomeev, and D. Emelianov. "Effect of formation water and hydrochloric acid on the physical and chemical properties of polymer materials of high pressure pipelines used for transportation of crude oil." In General question of world science. L-Journal, 2020. http://dx.doi.org/10.18411/gq-30-11-2020-17.

Full text
Abstract:
The purpose of the work is to conduct a comparative analysis of the stability of two types of polymer coatings to the effects of formation water and hydrochloric acid based on the analysis of mechanical properties, thermal stability and surface morphology. To accomplish the task, modern physical-chemical methods were used: differential scanning calorimetry, microscopy, an electromechanical universal testing machine, a dilatometer. Simulation of the effect of water at elevated temperatures and pressures on the polymer coating samples was carried out in an autoclave-reactor, the study of the eff
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Differential scanning calorimetry pressure (PDSC)' for particular source types:
Journal articles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography