Journal articles: 'Digital Light Processing'

1

Horchani, R. "Femtosecond laser shaping with digital light processing." Optical and Quantum Electronics 47, no. 8 (2015): 3023–30. http://dx.doi.org/10.1007/s11082-015-0188-0.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Newell, Bruce D. "Understanding Digital Color Imaging and Processing." Microscopy and Microanalysis 4, S2 (1998): 56–57. http://dx.doi.org/10.1017/s1431927600020407.

Full text

Abstract:

Color and Color PerceptionAccurate color reproduction is an essential component in the effective use of digital imaging techniques in light microscopy. The color reproduction process begins with an understanding that color is the result of three key elements; light, the illuminated object, and the observation method. When light strikes an object, wavelengths may be reflected, absorbed or transmitted. Additionally, the observed colors are strongly influenced by the intensity of the illumination and its spectral content. Colors we think of as “white” can vary significantly in their spectral distribution, e.g., skylight is actually a bluish white while tungsten bulbs produce a yellowish white.Light waves that reach the eye stimulate a complex process that is not yet fully understood. Within the retina, three different types of cones respond to color hues and brightness while rods sense only brightness.

APA, Harvard, Vancouver, ISO, and other styles

3

Goodarzi Hosseinabadi, Hossein, Elvan Dogan, Amir K. Miri, and Leonid Ionov. "Digital Light Processing Bioprinting Advances for Microtissue Models." ACS Biomaterials Science & Engineering 8, no. 4 (2022): 1381–95. http://dx.doi.org/10.1021/acsbiomaterials.1c01509.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Wang, Mian, Wanlu Li, Luis S. Mille, et al. "Digital Light Processing Based Bioprinting with Composable Gradients." Advanced Materials 34, no. 1 (2021): 2107038. http://dx.doi.org/10.1002/adma.202107038.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Mikkelsen, H. F. "Using digital signal processing techniques in light controllers." IEEE Transactions on Consumer Electronics 39, no. 2 (1993): 122–30. http://dx.doi.org/10.1109/30.214817.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Huang, Junjie, Jiangkun Cai, Chenhao Huangfu, et al. "A Scalable Digital Light Processing 3D Printing Method." Micromachines 15, no. 11 (2024): 1298. http://dx.doi.org/10.3390/mi15111298.

Full text

Abstract:

The 3D printing method based on digital light processing (DLP) technology can transform liquid resin materials into complex 3D models. However, due to the limitations of digital micromirror device (DMD) specifications, the normal DLP 3D printing method (NDPM) cannot simultaneously process large-size and small-feature parts. Therefore, a scalable DLP 3D printing method (SDPM) was proposed. Different printing resolutions for a part were designed by changing the distance between the projector and the molding liquid level. A scalable DLP printer was built to realize the printing resolution requirements at different sizes. A series of experiments were performed. Firstly, the orthogonal experimental method was used, and the minimum and maximum projection distances were obtained as 20.5 cm and 30.5 cm, respectively. Accordingly, the layer thickness, exposure time, and waiting leveling time were 0.08 mm, 3 s, and 6 s and 0.08 mm, 7 s, and 10 s. Secondly, single-layer column feature printing was finished, which was shown to have two minimum printing resolutions of 101 μm and 157 μm at a projection distance of 20.5 cm and 30.5 cm. Thirdly, a shape accuracy test was conducted by using the SDPM. Compared with the NDPM, the shape accuracy of the small-feature round, diamond, and square parts was improved by 49%, 42%, and 2%, respectively. This study verified that the SDPM can build models with features demonstrating high local shape accuracy.

APA, Harvard, Vancouver, ISO, and other styles

7

Schmidt, Johanna, and Paolo Colombo. "Digital light processing of ceramic components from polysiloxanes." Journal of the European Ceramic Society 38, no. 1 (2018): 57–66. http://dx.doi.org/10.1016/j.jeurceramsoc.2017.07.033.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Haris, Uroob, Joshua T. Plank, Bo Li, Zachariah A. Page, and Alexander R. Lippert. "Visible Light Chemical Micropatterning Using a Digital Light Processing Fluorescence Microscope." ACS Central Science 8, no. 1 (2021): 67–76. http://dx.doi.org/10.1021/acscentsci.1c01234.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Rei, Silviu, Dan Chicea, Beriliu Ilie, and Sorin Olaru. "Dynamic Light Scattering Signal Conditioning for Data Processing." ACTA Universitatis Cibiniensis 69, no. 1 (2017): 130–35. http://dx.doi.org/10.1515/aucts-2017-0016.

Full text

Abstract:

Abstract When performing data acquisition for a Dynamic Light Scattering experiment, one of the most important aspect is the filtering and conditioning of the electrical signal. The signal is amplified first and then fed as input for the analog digital convertor. As a result a digital time series is obtained. The frequency spectrum is computed by the logical unit offering the basis for further Dynamic Light Scattering analysis methods. This paper presents a simple setup that can accomplish the signal conditioning and conversion to a digital time series.

APA, Harvard, Vancouver, ISO, and other styles

10

Kun, Krisztián. "Technológiai paraméterek hatása Digital Light processing 3D nyomtatási eljárásnál." Gradus 7, no. 2 (2020): 374–79. http://dx.doi.org/10.47833/2020.2.eng.006.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Fang, Zizheng, Yunpeng Shi, Yuhua Zhang, Qian Zhao, and Jingjun Wu. "Reconfigurable Polymer Networks for Digital Light Processing 3D Printing." ACS Applied Materials & Interfaces 13, no. 13 (2021): 15584–90. http://dx.doi.org/10.1021/acsami.0c23107.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Cramer, Corson L., Jackson K. Wilt, Quinn A. Campbell, Lu Han, Tomonori Saito, and Andrew T. Nelson. "Accuracy of stereolithography printed alumina with digital light processing." Open Ceramics 8 (December 2021): 100194. http://dx.doi.org/10.1016/j.oceram.2021.100194.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Li, Wanlu, Mian Wang, Luis Santiago Mille, et al. "A Smartphone‐Enabled Portable Digital Light Processing 3D Printer." Advanced Materials 33, no. 35 (2021): 2102153. http://dx.doi.org/10.1002/adma.202102153.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Wyble, David R., and Mitchell R. Rosen. "Color Management of Four-Primary Digital Light Processing Projectors." Journal of Imaging Science and Technology 50, no. 1 (2006): 17. http://dx.doi.org/10.2352/j.imagingsci.technol.(2006)50:1(17).

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Goulas, Athanasios, Dongrui Xie, Judith Gibitz, Sina Saremi-Yarahmadi, and Bala Vaidhyanathan. "Digital light processing of sodium-beta-alumina ceramic electrolytes." Applied Materials Today 39 (August 2024): 102276. http://dx.doi.org/10.1016/j.apmt.2024.102276.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Luongo, A., V. Falster, M. B. Doest, et al. "Microstructure Control in 3D Printing with Digital Light Processing." Computer Graphics Forum 39, no. 1 (2019): 347–59. http://dx.doi.org/10.1111/cgf.13807.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Zhang, Keqiang, Rujie He, Guojiao Ding, Chengwei Feng, Weidong Song, and Daining Fang. "Digital light processing of 3Y-TZP strengthened ZrO2 ceramics." Materials Science and Engineering: A 774 (February 2020): 138768. http://dx.doi.org/10.1016/j.msea.2019.138768.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Thrasher, Carl J., Johanna J. Schwartz, and Andrew J. Boydston. "Modular Elastomer Photoresins for Digital Light Processing Additive Manufacturing." ACS Applied Materials & Interfaces 9, no. 45 (2017): 39708–16. http://dx.doi.org/10.1021/acsami.7b13909.

Full text

APA, Harvard, Vancouver, ISO, and other styles

19

Li, Vincent Chi-Fung, Xiao Kuang, Arie Mulyadi, Craig M. Hamel, Yulin Deng, and H. Jerry Qi. "3D printed cellulose nanocrystal composites through digital light processing." Cellulose 26, no. 6 (2019): 3973–85. http://dx.doi.org/10.1007/s10570-019-02353-9.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Chen, Zhiqiang, Meng Yang, Mengke Ji, Xiao Kuang, H. Jerry Qi, and Tiejun Wang. "Recyclable thermosetting polymers for digital light processing 3D printing." Materials & Design 197 (January 2021): 109189. http://dx.doi.org/10.1016/j.matdes.2020.109189.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Monzón, Mario, Zaida Ortega, Alba Hernández, Rubén Paz, and Fernando Ortega. "Anisotropy of Photopolymer Parts Made by Digital Light Processing." Materials 10, no. 1 (2017): 64. http://dx.doi.org/10.3390/ma10010064.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Mu, Quanyi, Lei Wang, Conner K. Dunn, et al. "Digital light processing 3D printing of conductive complex structures." Additive Manufacturing 18 (December 2017): 74–83. http://dx.doi.org/10.1016/j.addma.2017.08.011.

Full text

APA, Harvard, Vancouver, ISO, and other styles

23

Kaur, Gurpreet, Abraham Marmur, and Shlomo Magdassi. "Fabrication of superhydrophobic 3D objects by Digital Light Processing." Additive Manufacturing 36 (December 2020): 101669. http://dx.doi.org/10.1016/j.addma.2020.101669.

Full text

APA, Harvard, Vancouver, ISO, and other styles

24

Zhao, Zhi, Xiaoxiao Tian, and Xiaoyan Song. "Engineering materials with light: recent progress in digital light processing based 3D printing." Journal of Materials Chemistry C 8, no. 40 (2020): 13896–917. http://dx.doi.org/10.1039/d0tc03548c.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

Venkata Sai Prasad, Garapati, Hari Naga Prasad Chenna, Akella Naga Sai Baba, Prashant Hugar, P. Pavani, and Nikolai Ivanovich Vatin. "Evaluation of Grain Size Distribution by Digital Image Processing." MATEC Web of Conferences 392 (2024): 01007. http://dx.doi.org/10.1051/matecconf/202439201007.

Full text

Abstract:

Sieve analysis tests are frequently used to determine the grain size distribution of granular materials. This project proposes an ImageJbased image analysis approach for evaluating aggregate particle size distribution. Grain size in image analysis should be estimated to compare the graduation curves between the two methods.. Black sheets were more effective than white sheets for particle placement, perhaps due to light effects. This technology may be utilized for in-suit testing, as it requires a camera and computer. The study used monochromatic light and a highdefinition camera to capture grain photos while controlling for background, light direction, and intensity. A ground truth was established to evaluate errors in determining grain areas. All grain shape parameters are obtained using the ImageJ program. The grain size distribution curve is generated using image analysis.

APA, Harvard, Vancouver, ISO, and other styles

26

UDDIN, MOHAMMED RAFIQ, GAZI MAEEN -UR- RASHID, and MD SHAHIDUL ISLAM. "MICROCONTROLLER BASED LIGHT CONTROL." International Journal of Software Engineering and Knowledge Engineering 15, no. 02 (2005): 319–24. http://dx.doi.org/10.1142/s021819400500235x.

Full text

Abstract:

A microcontroller-based control system is a direct outgrowth of the extensive advances in the Integrated Circuit design and microelectronic device processing technology. This has led to the development of new forms of technologies. This paper presents a technique of microcontroller based control system for controlling the lights of a room. Using the technique, according to the intensity of the sunlight in a room, the states of light of that room will change. Therefore we need to collect data or information from the environment using light sensors to control lights. The microcontroller collects the information from the atmosphere and changes the state of different lights. The analog data collected by the sensors are converted to digital form by an Analog to Digital Converter (ADC) and then fed to the microcontroller. The output data stream of the microcontroller is in digital form by which analog device lights will be controlled.

APA, Harvard, Vancouver, ISO, and other styles

27

Lee, Jin-Wook, Sahn Nahm, Kwang-Taek Hwang, Jin-Ho Kim, Ung-Soo Kim, and Kyu-Sung Han. "Synthesis and Characterization of Silica Composite for Digital Light Processing." Korean Journal of Materials Research 29, no. 1 (2019): 23–29. http://dx.doi.org/10.3740/mrsk.2019.29.1.23.

Full text

APA, Harvard, Vancouver, ISO, and other styles

28

de Camargo, Italo Leite, Rogério Erbereli, and Carlos Alberto Fortulan. "Additive manufacturing of electrofused mullite slurry by digital light processing." Journal of the European Ceramic Society 41, no. 14 (2021): 7182–88. http://dx.doi.org/10.1016/j.jeurceramsoc.2021.07.005.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Li, Ning, Zuojia Xiang, Youjie Rong, Lisheng Zhu, and Xiaobo Huang. "3D Printing Tannic Acid‐Based Gels via Digital Light Processing." Macromolecular Bioscience 22, no. 4 (2022): 2100455. http://dx.doi.org/10.1002/mabi.202100455.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Drury, Ryan, Vitor Sencadas, and Gursel Alici. "Development of an elastomeric resin for digital light processing printing." Journal of Applied Polymer Science 139, no. 19 (2022): 52123. http://dx.doi.org/10.1002/app.52123.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Hu, Kehui, Pengcheng Zhao, Jianjun Li, and Zhigang Lu. "High-resolution multiceramic additive manufacturing based on digital light processing." Additive Manufacturing 54 (June 2022): 102732. http://dx.doi.org/10.1016/j.addma.2022.102732.

Full text

APA, Harvard, Vancouver, ISO, and other styles

32

Zhang, Jiumeng, Qipeng Hu, Shuai Wang, Jie Tao, and Maling Gou. "Digital Light Processing Based Three-dimensional Printing for Medical Applications." International Journal of Bioprinting 6, no. 1 (2019): 1. http://dx.doi.org/10.18063/ijb.v6i1.242.

Full text

Abstract:

An additive manufacturing technology based on projection light, digital light processing (DLP) 3D printing, has been widely applied in the field of medical products production and development. The precision projection light, reflected by a million pixels instead of a focused point, provides this technology both printing accuracy and printing speed. In particular, this printing technology provides a relatively milder condition to cells due to its non-direct contact. This review introduces the DLP-based 3D printing technology and its applications in medicine, including precise medical devices, functionalized artificial tissues and specific drug delivery systems. The products are particularly discussed for their significance for medicine. We believe that this technology provides a potential tool for biological research and clinical medicine, while challenges of scale-up and regulatory approval are also discussed.

APA, Harvard, Vancouver, ISO, and other styles

33

Cheng, Qingkui, Yan Zheng, Tao Wang, Dongli Sun, and Runxiong Lin. "Yellow resistant photosensitive resin for digital light processing 3D printing." Journal of Applied Polymer Science 137, no. 7 (2019): 48369. http://dx.doi.org/10.1002/app.48369.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Jorge, P. A. S., L. A. Ferreira, and J. L. Santos. "Digital signal processing technique for white light based sensing systems." Review of Scientific Instruments 69, no. 7 (1998): 2595–602. http://dx.doi.org/10.1063/1.1148986.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Choi, Garam, Mingyu Kim, Jinyong Kim, and Heui Jae Pahk. "Angle-resolved spectral reflectometry with a digital light processing projector." Optics Express 28, no. 18 (2020): 26908. http://dx.doi.org/10.1364/oe.405204.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Schmidt, Johanna, Hamada Elsayed, Enrico Bernardo, and Paolo Colombo. "Digital light processing of wollastonite-diopside glass-ceramic complex structures." Journal of the European Ceramic Society 38, no. 13 (2018): 4580–84. http://dx.doi.org/10.1016/j.jeurceramsoc.2018.06.004.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Dou, Rui, Wei Zhe Tang, Li Wang, et al. "Sintering of lunar regolith structures fabricated via digital light processing." Ceramics International 45, no. 14 (2019): 17210–15. http://dx.doi.org/10.1016/j.ceramint.2019.05.276.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Tiller, Benjamin, Andrew Reid, Botong Zhu, et al. "Piezoelectric microphone via a digital light processing 3D printing process." Materials & Design 165 (March 2019): 107593. http://dx.doi.org/10.1016/j.matdes.2019.107593.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Erhardt, Angelika, G. Zinser, D. Komitowski, and J. Bille. "Reconstructing 3-D light-microscopic images by digital image processing." Applied Optics 24, no. 2 (1985): 194. http://dx.doi.org/10.1364/ao.24.000194.

Full text

APA, Harvard, Vancouver, ISO, and other styles

40

NIIKUNI, Keiyu, Ryo TACHIBANA, Syoichi IWASAKI, and Toshiaki MURAMOTO. "Evaluating digital light processing (DLP) projectors for presenting visual stimuli." Japanese Journal of Cognitive Psychology 14, no. 2 (2017): 83–90. http://dx.doi.org/10.5265/jcogpsy.14.83.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Gang, Luo, Liu Fulai, Lin Lie, et al. "Optical/digital color photography based on white-light information processing." Science China Technological Sciences 44, no. 2 (2001): 140–48. http://dx.doi.org/10.1007/bf03014624.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Tasevska, Teodora, Ivana Adamov, Nikola Geskovski, Maja Simonoska Crcarevska, Katerina Goracinova, and Svetlana Ibrić. "Digital light processing 3D printing of Hydrochlorothiazide with modified release." Macedonian Pharmaceutical Bulletin 69, no. 03 (2023): 281–82. http://dx.doi.org/10.33320/maced.pharm.bull.2023.69.03.136.

Full text

APA, Harvard, Vancouver, ISO, and other styles

43

Zhu, Dexing, Jian Zhang, Qiao Xu, and Yaguo Li. "3D printing of glass aspheric lens by digital light processing." Journal of Manufacturing Processes 116 (April 2024): 40–47. http://dx.doi.org/10.1016/j.jmapro.2024.02.038.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Daňko, Martin, and Petra Žárská. "The Digital tax system in the light of GDPR." Bratislava Law Review 2, no. 2 (2018): 183–90. http://dx.doi.org/10.46282/blr.2018.2.2.120.

Full text

Abstract:

The digital tax system is becoming extremely essential in the modern world. As we look at the system itself as a great benefit for its users and states as well, we tend to forget the role of personal data within it. Personal data play crucial role in the errorless digital tax system. The new regulation of EU, General Data Protection Regulation is addressing processing of personal data within the state administration of EU member states. The aim of this article is to examine the effect of GDPR on the digital tax system and encourage wide academic and public discussion in relation to processing of personal data in the digital tax system.

APA, Harvard, Vancouver, ISO, and other styles

45

Xu, Wu Jian, Hao Sheng, Chen Lou, and Hui Jie Zhao. "The Gray Processing of Moon Digital Orthophoto Map." Applied Mechanics and Materials 182-183 (June 2012): 2113–17. http://dx.doi.org/10.4028/www.scientific.net/amm.182-183.2113.

Full text

Abstract:

Considering the mosaic result of the lunar DOM (Digital Orthophoto Map) produced by China's “CE-1” satellite, there usually exists a sharp gray jump beside the joining line. As to a strip image, the gray distribution may be uneven because of the light changing or position difference during photographing. To solve these matters, a method was proposed which is based on dynamic rules to detect the best joining line, and then stretch image according to its gray histogram. By making the pixels around boundary to change gradually, the joining line will finally be invisible. In order to solve the uneven gray distribution problems causing by imaging angle, light condition and other factors, a homogenization technology based on statistics of gray distribution was proposed. Using statistical information of the bands’ longitudinal changes to united the gray level to a defaulted range. The experimental results show that the method of this paper can make the integral gray level become even, the transition become more gently, and visual effect become more natural.

APA, Harvard, Vancouver, ISO, and other styles

46

Seo, Jeong Wook, Gyu Min Kim, Yejin Choi, Jae Min Cha, and Hojae Bae. "Improving Printability of Digital-Light-Processing 3D Bioprinting via Photoabsorber Pigment Adjustment." International Journal of Molecular Sciences 23, no. 10 (2022): 5428. http://dx.doi.org/10.3390/ijms23105428.

Full text

Abstract:

Digital-light-processing (DLP) three-dimensional (3D) bioprinting, which has a rapid printing speed and high precision, requires optimized biomaterial ink to ensure photocrosslinking for successful printing. However, optimization studies on DLP bioprinting have yet to sufficiently explore the measurement of light exposure energy and biomaterial ink absorbance controls to improve the printability. In this study, we synchronized the light wavelength of the projection base printer with the absorption wavelength of the biomaterial ink. In this paper, we provide a stepwise explanation of the challenges associated with unsynchronized absorption wavelengths and provide appropriate examples. In addition to biomaterial ink wavelength synchronization, we introduce photorheological measurements, which can provide optimized light exposure conditions. The photorheological measurements provide precise numerical data on light exposure time and, therefore, are an effective alternative to the expendable and inaccurate conventional measurement methods for light exposure energy. Using both photorheological measurements and bioink wavelength synchronization, we identified essential printability optimization conditions for DLP bioprinting that can be applied to various fields of biological sciences.

APA, Harvard, Vancouver, ISO, and other styles

47

Burde, A. V., A. L. Vigu, and S. Sava. "Usefulness of digital light processing based three-dimensional printing in the digital production of provisional restorations." Medicine in Evolution 28, no. 1 (2022): 29–38. http://dx.doi.org/10.70921/medev.v28i1.1094.

Full text

Abstract:

Digital light processing (DLP) based 3D printing is an additive digital technique that allows manufacturing of a complex three-dimensional structure by projecting light on a light cured resin. After each exposure, the platform of the printer descends, with a distance equal to the thickness of a layer, and the process repeats until the final product is obtained. Our study aims to present the laboratory steps necessary for the manufacturing of temporary restorations consisting of provisional crowns by DLP based 3D printing. The temporary restorations obtained fulfilled the targeted aesthetic and functional characteristics and restored the morphological and functional integrity of the maxillary arch, until the application of the final fixed dental prostheses. In addition to ease and accuracy, significant time saving can be achieved for both the dental office and the laboratory, as well as for the patient, eliminating a number of steps by the advantages of 3D printing technology over conventional techniques.

APA, Harvard, Vancouver, ISO, and other styles

48

Sun, Ying, Ming Li, Yanlin Jiang, et al. "High‐Quality Translucent Alumina Ceramic Through Digital Light Processing Stereolithography Method." Advanced Engineering Materials 23, no. 7 (2021): 2001475. http://dx.doi.org/10.1002/adem.202001475.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

Hang, ZHANG, XU Songfeng, XIONG Yinze, GAO Ruining та LI Xiang. "Fabrication of Porous β β -TCP Bioceramics Using Digital Light Processing". Journal of Mechanical Engineering 55, № 15 (2019): 81. http://dx.doi.org/10.3901/jme.2019.15.081.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Chen, Pin-Chuan, Cing-Sung Yeh, and Chih-Yu Hsieh. "Defocus digital light processing stereolithography for rapid manufacture of microlens arrays." Sensors and Actuators A: Physical 345 (October 2022): 113819. http://dx.doi.org/10.1016/j.sna.2022.113819.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Journal articles on the topic 'Digital Light Processing'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles