Relevant bibliographies by topics / Digital multimeters

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Digital multimeters'

Author: Grafiati
Published: 4 June 2021
Last updated: 1 March 2023

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Digital multimeters.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Digital multimeters"

1

Karataev, S. S., and A. I. Borisov. "Modern structure and innovative efficiency of special equipment for analyzing semiconductor devices." Journal of Physics: Conference Series 2373, no. 7 (December 1, 2022): 072036. http://dx.doi.org/10.1088/1742-6596/2373/7/072036.

Full text
Abstract:
Abstract The multimeter is a sophisticated electronic measuring device that combines several functions: voltmeter, ammeter and ohmmeter. It measures DC and AC voltage, DC and AC current, resistance, capacitance, frequency, transistor gain, diode checks and wire-check connections. The multimeter also features automatic polarity reversal. Digital multimeters range from 2.5 digits (simple devices) to 3.5 digits (most devices). Slightly more expensive instruments with 4.5, 5 and higher digits are also available. The digit capacity “3.5”, for example, means that the display of the device shows 3 full digits, with a range of 0 to 9, and 1 digit with a limited range, i.e., the device can give readings in the range of 0.000 to 1.999; if the measured value is outside these limits, a changeover to another range is required. Many multimeters now have other functions available. This paper is relevant and can be useful because the multimeter is a lightweight, portable device that is convenient for basic measurements and troubleshooting in hard-to-reach places, as well as being a sophisticated stationary device with many features. Multimeter (from multimeter, tester from test, Avometer from AmperVoltOhmMeter) is a combined electrical measuring device that combines several functions. In the minimum set is a voltmeter, ammeter and ohmmeter. Sometimes a multimeter is performed in the form of current clamps. There are digital and analog multimeters. device multimeter computing technique.
APA, Harvard, Vancouver, ISO, and other styles
2

&NA;. "Impedance Converter for Digital Multimeters Now Available from Ohmic Instruments." Journal of Clinical Engineering 17, no. 1 (January 1992): 26. http://dx.doi.org/10.1097/00004669-199201000-00010.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Velychko, Oleh, and Tatiana Gordiyenko. "Comparative research of quality indicators of measuring instruments: practical aspects." Ukrainian Metrological Journal, no. 3 (October 5, 2021): 24–30. http://dx.doi.org/10.24027/2306-7039.3.2021.241620.

Full text
Abstract:
The main purpose of modern measuring instrument MI is to perform accurate and reliable measurements in order to obtain complete and reliable measurement information. The MI must be of proper quality, which must be reliably assessed. For technical means, traditional quality indicators have been established, some of which are common to MI. The metrological characteristic is unique to a MI and can be considered one of the most important of MI indicators. The quality of MI is characterized by a certain system of quality indicators. Depending on MI group, the system of quality indicators can differ. The target indicators are specific for each type of product. These indicators require additional analysis. The main metrological characteristics should be referred to the target indicators of MI. For some MI categories, additional indicators can be established, and for others, they are excluded. The methodology of evaluation of MI quality indicators and algorithm of its realization are offered. The digital multimeters as category of MI have been selected for practical comparative evaluation of MI quality indicators. The ten indicators for this category of MI have been refined. Comparative expert evaluation of quality indicators of 12 multimeters was carried out with the involvement of a group of 34 metrology experts. The weight of each of the 10 selected MI quality indicators was determined. The results of expert evaluation of multimeter are presented.
APA, Harvard, Vancouver, ISO, and other styles
4

Grzeczka, Grzegorz, and Maciej Klebba. "Automated Calibration System for Digital Multimeters Not Equipped with a Communication Interface." Sensors 20, no. 13 (June 29, 2020): 3650. http://dx.doi.org/10.3390/s20133650.

Full text
Abstract:
This article is focused on the calibration of digital multimeters, in which the concept and practical solutions for stations with software for automatic calibration are presented. This paper also presents the general structure of the measuring system, the application scheme, and the technical implementation of measuring stations, together with the software.
APA, Harvard, Vancouver, ISO, and other styles
5

Costa, Marcelo Melo da, and Thiago Brito Pereira de Souza. "Strategy for traceability in electrical calibration laboratories using precision digital multimeters." Journal of Physics: Conference Series 1826, no. 1 (March 1, 2021): 012099. http://dx.doi.org/10.1088/1742-6596/1826/1/012099.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Demerdžiev, Kiril. "UNCERTAINTY BUDGET EVALUATION PRINCIPLE IN HIGH AND LOW RESOLUTION DIGITAL MULTIMETERS CALIBRATIONS47." Journal of Electrical Engineering and Information Technologies 4, no. 1-2 (2019): 5–13. http://dx.doi.org/10.51466/jeeit1941-205d.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Demerdžiev, Kiril. "UNCERTAINTY BUDGET EVALUATION PRINCIPLE IN HIGH AND LOW RESOLUTION DIGITAL MULTIMETERS CALIBRATIONS47." Journal of Electrical Engineering and Information Technologies 4, no. 1-2 (2019): 5–13. http://dx.doi.org/10.51466/jeeit1941-205d.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Stadnik, V. V., and V. N. Chinkov. "Microprocessor multimeters based on digital processing of the instantaneous values of signals." Measurement Techniques 38, no. 9 (September 1995): 1039–43. http://dx.doi.org/10.1007/bf00979087.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Chen, Yung-Sheng, and Jeng-Yau Wang. "Computer Vision-Based Approach for Reading Analog Multimeter." Applied Sciences 8, no. 8 (July 31, 2018): 1268. http://dx.doi.org/10.3390/app8081268.

Full text
Abstract:
Multimeters are useful instruments for measuring electronic parameters. Even though the digital multimeter is commonly used in our daily life under the considerations of precision and cost, the analog multimeter is still preferable in many applications due to its easy use to monitor promptly varying values. However, the reading of analog multimeters (or A-meter) usually relies on human eyes with two obvious drawbacks of inefficiency and easy fatigue, while visual inspection onto an A-meter is needed for a long period of time. From the viewpoint of optical sensor application, computer vision, like human eyes, can also be used to sense stimuli from the real world. Therefore, in this paper, an approach of reading an A-meter based on a computer vision technique is proposed. Reading an A-meter relies on information from the arrow on the function selector and the pointer on the instrument meter; the presented method is thus mainly composed of horizontal alignment of the A-meter, detection of the instrument meter region, angle detection of the selector arrow, and angle detection of the pointer. In addition, the schemes of edge-based geometric matching (EGM) and pyramidal gradient matching (PGM) are adopted to detect the regions of interest. The mapping relationship between the function selector and the selector arrow as well as that between the instrument meter and the pointer are built and formulated to finally read the A-meter. The often used scenarios for reading AC voltage, DC voltage, and DC current as well as resistance are used for experiments and evaluations. The experimental results show that the accuracy of detecting the function selected is 100%, the mean accuracy of reading a value from the A-meter is 95% or above, except for some cases of reading resistance that are affected by the so-called little-change-large-multiplier effect. The proposed method can perform very well as long as the mean intensity is ≥7.5. Based on a suitable modification of the proposed method, an application of monitoring a storage level meter and pressure meter installed on a 15 m3 liquid nitrogen (LN2) tank is demonstrated. Our experiments and demonstrations confirm the feasibility of the proposed approach.
APA, Harvard, Vancouver, ISO, and other styles
10

Falka, Rachmat Firdaus, and Yahya Bahar. "Pengukuran Nilai Selisih Error Tegangan Keluaran Catu Daya DC dengan Menggunakan Multimeter Digital dan Multimeter Analog pada Praktikum Laboratorium Dasar Elektronika dan Rangkaian Listrik Jurusan Teknik Elektro Universitas Sriwijaya." Jurnal Pengelolaan Laboratorium Pendidikan 4, no. 2 (June 14, 2022): 48–56. http://dx.doi.org/10.14710/jplp.4.2.48-56.

Full text
Abstract:
The power supply as a voltage source with a DC (Direct Current) output voltage or direct current is often used for electronic equipment, both office equipment and household equipment (Imam Saukani, 2020). In using the power supply, the output voltage is selected and high accuracy is required to obtain the output voltage that suits the user's needs. Often times, the power supply used in the practicum does not produce the right output voltage. The purpose of this study is to determine the value of the difference in the output voltage error generated after first determining the voltage value to be used at no-load using a digital multimeter and an analog multimeter as a comparison. After measuring the output voltage of the power supply, the correct voltage value is obtained in each practicum, measurements made at the same time can give definite results of the value of the output voltage of the power supply, the relatively small difference in results ensures that the power supply is in good condition, the output voltage of the power supply is measured using the measuring instrument with repeated measurements 7 (seven) times at each predetermined voltage and obtained a difference of 0.01V – 0.02V. After taking measurements using digital and analog multimeters, it can be concluded that measurements made before the practicum by measuring the output voltage of the power supply can help get the correct voltage value in each practicum, measurements by comparing measuring instruments at the same time can provide definite results of the resulting voltage value by the power supply, the difference in the results obtained is relatively small so as to ensure that the power supply is in good condition, the power supply can be used on loads or electronic equipment that requires a DC voltage source (Genta Subni Ananda Putra, et al, 2020). Practicum can be done well by measuring the output voltage of the power supply. This difference in output voltage results is what the author uses as research material for scientific writing which aims to find solutions to existing errors.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Digital multimeters"

1

Fahlström, Tim. "Design av Digital Multimeter-modul för inbyggt testsystem." Thesis, Högskolan i Gävle, Avdelningen för elektronik, matematik och naturvetenskap, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-17940.

Full text
Abstract:
The thesis work of 15 credits has been performed to interest of Norrtälje ElektronikPartner AB (NEP) in Norrtälje. The aim of the thesis was to develop a prototype for an integrated digital multimeter, designed for one of NEP's proprietary test systems. A digital multimeter module according to NEP's requirement specification, such as physical size and accuracy should be constructed. The module should be able to measure current, voltage and resistance. The final circuit was based on the chosen analog to digital-converter, Maxim integrated´s Max134, which is the main component of the circuit for this instrument. A circuit diagram and PCB layout were made.   The result of this project is a constructed DMM board. During the project's final phase testing, tuning and validation were performed against the established terms of reference. The module was then found to measure current, voltage and resistance according to desired tolerance level.
APA, Harvard, Vancouver, ISO, and other styles
2

Hofman, Jiří. "Testovací metody pro hodnocení radiačních efektů v přesných analogových a signálově smíšených obvodech pro aplikace v kosmické elektronice." Doctoral thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2019. http://www.nusl.cz/ntk/nusl-401588.

Full text
Abstract:
The traditional radiation testing of space electronics has been used for more than fifty years to support the radiation hardness assurance. Its typical goal is to ensure reliable operation of the spacecraft in the harsh environment of space. This PhD research looks into the radiation testing from a different perspective; the goal is to develop radiation testing methods that are focused not only on the reliability of the components but also on a continuous radiation-induced degradation of their performance. Such data are crucial for the understanding of the impact of radiation on the measurement uncertainty of data acquisition systems onboard research space missions.
APA, Harvard, Vancouver, ISO, and other styles
3

Wang, Mei-Shu, and 王美淑. "The Compensation Algorithm and Implementation of Alternating Current(AC) Function of Digital Multimeter." Thesis, 1998. http://ndltd.ncl.edu.tw/handle/57881779317780477894.

Full text
Abstract:
碩士
淡江大學
電機工程研究所
86
The parasitic capacitance is distributed over electrical components、printed circuit boards and integrated circuits. The Range Network in Digital Multimeter is composed of 10M□、1k□、10k□、100k□and1M□ resistance for measuring voltage in every range. It acts as a voltage divider and scales input voltage to suitable range. It is inevitable that a parasitic capacitance is parallel with a resistance. The parasitic capacitance causes a zero in low frequency. Increasing the resistance results in decreasing the zero. Because the zero and pole are not identical, it brings to measurement error. The General solution is to add a tunable capacitance to resistance. With tuning the capacitance appropriately, pole and zero can be eliminated. However the tunable capacitance is high capital and time-consuming. In this thesis, we designed a new algorithm and model. It achieves frequency compensation without the tunable capacitance and simplifies the calibrating procedure. 　　In the end, We prove the algorithm and improve the accuracy with the experiment results.
APA, Harvard, Vancouver, ISO, and other styles
4

Lin, Ching-Ying, and 林靜瑩. "Design of a Recognition System for Digital Multimeter: Taking Dormitory of National Dong Hwa University as an Example." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/cjz46f.

Full text
Abstract:
碩士
國立東華大學
資訊工程學系
105
In recent years, the quickly advanced technologies of machine recognition of characters have been effective enough for replacing many human readers to save the manpower and time. This thesis study aims to develop an automatic digital wattmeter reader system for electricity charge management of rooms in the university dormitories. The system utilizes mobile phones as the frontend and an image recognition engine as the server. After receiving the image of a wattmeter captured from a wattmeter, the recognition process starts from extracting the image block of the watt readings, then segmenting individual digits from readings and finally recognizing the segmented digits. All recognized outputs, as well as the images, are well stored in a data repository for the management of electricity charge. The extraction of reading blocks is done by matching the feature points on both the input image and a best-match template image. From the correspondences of the feature points, a geometric transform between the two images is derived to locate the corner points of the reading block. Over the extracted reading block, the issues of light reflection and surface blotting are handled by image binarization, thinning, morphological operations and noise removal. The image of each individual digit is then segmented by exploiting two methods, including the connected component labelling and vertical pixel projection, for performance comparison. To recognize the segmented digits, we use a Bayes classifier and a support vector machine for experiments to compare the recognition performance. After the evaluation, our system achieves a recognition rate of 91.8% at the speed of 0.622 second per image. The developed system has significantly reduced the time for the original process of human recognition and transcription from six hours to only two hours and serves as very pragmatic and cost-effective research contribution.
APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Digital multimeters"

1

Mazur, Glen. Digital multimeter principles. Homewood, Ill: American Technical Publishers, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Mazur, Glen. Digital multimeter principles. 2nd ed. Homewood, Ill: American Technical Publishers, 2001.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Mark, Parker, and National Institute of Standards and Technology (U.S.), eds. NIST multifunction calibration system. Gaithersburg, MD: U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Mark, Parker, and National Institute of Standards and Technology (U.S.), eds. NIST multifunction calibration system. Gaithersburg, MD: U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Mark, Parker, and National Institute of Standards and Technology (U.S.), eds. NIST multifunction calibration system. Gaithersburg, MD: U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Mazur, Glen. Digital multimeter principles. 4th ed. Orland Park, Ill: American Technical Publishers, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Davidson, Homer L. Pocket digital multimeter techniques. Blue Ridge Summit, PA: Tab Books, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Fath, Sulema. Types of Digital Multimeters : the Basics of Digital Multimeters: Digital Multimeter Price. Independently Published, 2021.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

NIST multifunction calibration system. Gaithersburg, MD: U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Tobey, Larraine. Digital Multimeter Use : How Digital Multimeter Work: Multimeter Princess Auto. Independently Published, 2021.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Digital multimeters"

1

Cook, David. "Digital Multimeter." In Robot Building for Beginners, 31–49. Berkeley, CA: Apress, 2015. http://dx.doi.org/10.1007/978-1-4842-1359-9_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Cook, David. "Digital Multimeter." In Robot Building for Beginners, 37–62. Berkeley, CA: Apress, 2002. http://dx.doi.org/10.1007/978-1-4302-0826-6_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Cook, David. "Digital Multimeter." In Robot Building for Beginners, 33–52. Berkeley, CA: Apress, 2009. http://dx.doi.org/10.1007/978-1-4302-2749-6_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Weik, Martin H. "digital multimeter." In Computer Science and Communications Dictionary, 411. Boston, MA: Springer US, 2000. http://dx.doi.org/10.1007/1-4020-0613-6_5041.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Huang, Qingdan, Liqiang Pei, Yuqing Chen, Rui Rao, and Huiyuan Lv. "Digital Multimeter Automatic Verification Device Design." In Advances in Intelligent Systems and Computing, 295–301. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-3308-2_33.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Bartmann, Erik, and Jörn Donges. "Analog gegen digital – Einsatz von Potenziometer, Joystick und Multimeter." In Open Robots für Maker, 137–57. München: Carl Hanser Verlag GmbH & Co. KG, 2018. http://dx.doi.org/10.3139/9783446456129.010.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Kagan, Aubrey. "Interface to a Digital Multimeter Using a Serial Port." In Excel by Example, 240–80. Elsevier, 2004. http://dx.doi.org/10.1016/b978-075067756-1/50016-0.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Digital multimeters"

1

A. Roberts, P., and M. Early. "Normal Mode Offsets in High Performance Digital Multimeters." In 2004 Conference on Precision Electromagnetic Measurements. IEEE, 2004. http://dx.doi.org/10.1109/cpem.2004.305441.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bailey, Michael. "Digitally Gernerated AC Reference Source." In NCSL International Workshop & Symposium. NCSL International, 2013. http://dx.doi.org/10.51843/wsproceedings.2013.29.

Full text
Abstract:
The design of an AC voltage reference source using a digital to analogue converter controlled by microcontroller to produce a calculable RMS AC voltage reference with accuracy suitable for calibrating high performance Digital multimeters.
APA, Harvard, Vancouver, ISO, and other styles
3

Faulkner, Neil, and Jeff Gust. "Using digital multimeters in place of analog null meters for metrological applications." In 2014 Conference on Precision Electromagnetic Measurements (CPEM 2014). IEEE, 2014. http://dx.doi.org/10.1109/cpem.2014.6898476.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Slomovitz, D., L. Trigo, C. Faverio, M. Brehm, and G. A. Kyriazis. "Step-Up Calibration of Resistive Voltage Dividers Using Two Sampling Digital Multimeters up to 50 kHz." In 2018 Conference on Precision Electromagnetic Measurements (CPEM 2018). IEEE, 2018. http://dx.doi.org/10.1109/cpem.2018.8501056.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kaneko, Nobu-Hisa. "Prototype of a Compact Detachable Zener Module for DC Voltage Standard." In NCSL International Workshop & Symposium. NCSL International, 2018. http://dx.doi.org/10.51843/wsproceedings.2018.27.

Full text
Abstract:
We have been developing a compact Zener voltage generating system as a secondary standard of DC voltage. The main unit of the system includes a temperature-controlled Zener diode module driven with a built-in battery. The module is detachable from an expansion unit with larger battery packs for longer-time battery operation. This system realizes a compact DC voltage standard with maintaining state-of-the-art temporal stability and temperature stability performances of the output voltage. The results of the precise measurements based on a Josephson voltage standard show excellent drift characteristics within 2 ppm/year, small temperature coefficient less than 0.01 ppm/°C and negligible pressure coefficient. This DC voltage standard can be used in laboratories, inter-laboratory comparisons, and beyond such conventional purposes, the main Zener diode module can be installed in a measurement devices, such as digital multimeters, for further improvement of measurement capabilities.
APA, Harvard, Vancouver, ISO, and other styles
6

Schwartz, Michael. "Artificial Intelligence in Metrology Data Collection." In NCSL International Workshop & Symposium. NCSL International, 2021. http://dx.doi.org/10.51843/wsproceedings.2021.03.

Full text
Abstract:
Many companies have tried to automate data collection for handheld Digital Multimeters (DMM) using Optical Character Recognition (OCR). Only recently have companies tried to perform this task using Artificial Intelligence (AI) technology, Cal Lab Solutions being one of them in 2020. But when we developed our first prototype application, we discovered the difficulties of getting a good value with every measurement and test point.A year later, lessons learned and equipped with better software, this paper is a continuation of that AI project. In Beta-,1 we learned the difficulties of AI reading segmented displays. There are no pre-trained models for this type of display, so we needed to train a model. This required the testing of thousands of images, so we changed the scope of the project to a continual learning AI project. This paper will cover how we built our continuous learning AI model to show how any lab with a webcam can start automating those handheld DMMS with software that gets smarter over time.
APA, Harvard, Vancouver, ISO, and other styles
7

Emms, Frederick. "Measurement of Voltage Transformer Errors using a Self-calibrating Multi-ratio Capacitive Divider System." In NCSL International Workshop & Symposium. NCSL International, 2020. http://dx.doi.org/10.51843/wsproceedings.2020.11.

Full text
Abstract:
A new portable voltage transformer (VT) calibration system has been developed, based on an existing fixed laboratory system. The existing system is based on a high voltage compressed gas capacitor in the upper arm of a voltage divider, and a range of precision air capacitors in the lower arm, with the errors being balanced via the use of inductive voltage dividers. The new system utilises the same high voltage compressed gas capacitor in the upper arm but in the lower arm uses small, class 1, multi-layer ceramic capacitors. Instead of balancing the system with inductive voltage dividers, a direct measurement of the VT errors is made with the use of an integrating amplifier and two digital multimeters (DMMs). One DMM measures the secondary voltage and the other measures the relative phase and amplitude of the error voltage from an integrating amplifier. Using a VT with the nominal ratio of 10:1, and the ability of switching several of the lower arm ceramic capacitors into the upper arm, and then following a sequence of measurements, all the relative capacitance values can be calculated using a mathematical build-up process. The new portable VT calibration system has achieved a typical measurement uncertainty for voltage error and phase displacement of better than 0.003% and 0.003 crad respectively. It can test VTs with applied primary voltages from 30 V to 220 kV, and secondary voltages from 10 V to 300 V, with the ratio settings of the capacitive divider in the range of 0.1 to 2200. The system has been optimised for operating at 50 Hz and 60 Hz, but theoretically it could be used for higher frequencies.
APA, Harvard, Vancouver, ISO, and other styles
8

Mo, Wenxiong, Liqiang Pei, Qingdan Huang, and Weijie Liao. "Digital Multimeter Reading Recognition for Automation Verification." In AIAM2020: 2nd International Conference on Artificial Intelligence and Advanced Manufacture. New York, NY, USA: ACM, 2020. http://dx.doi.org/10.1145/3421766.3421821.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Wang, Lei-gao, Chun-ping Wang, Ming Li, and Lei-gao Wang. "Design of digital multimeter module based on ARM." In 2010 International Conference on Computer, Mechatronics, Control and Electronic Engineering (CMCE 2010). IEEE, 2010. http://dx.doi.org/10.1109/cmce.2010.5610193.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Wu, Caiyun, Qingxiang Wu, Caiyou Yuan, Pengfei Li, Yanan Zhang, and Yao Xiao. "Multimeter digital recognition based on feature coding detection." In 2017 10th International Congress on Image and Signal Processing, BioMedical Engineering and Informatics (CISP-BMEI). IEEE, 2017. http://dx.doi.org/10.1109/cisp-bmei.2017.8302009.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Digital multimeters"

1

Leedy, T. F., K. J. Lentner, O. B. Laug, and B. A. Bell. Electrical performance tests for hand-held digital multimeters. Gaithersburg, MD: National Institute of Standards and Technology, 1989. http://dx.doi.org/10.6028/nist.ir.88-4021.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Digital multimeters' for particular source types:
Journal articles Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography