Log in

Relevant bibliographies by topics / Dissimilar metal welding

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Dissimilar metal welding'

Author: Grafiati

Published: 4 June 2021

Last updated: 17 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Dissimilar metal welding.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Dissimilar metal welding"

1

Carlone, Pierpaolo, and Antonello Astarita. "Dissimilar Metal Welding." Metals 9, no. 11 (November 9, 2019): 1206. http://dx.doi.org/10.3390/met9111206.

Full text

Abstract:

The combination of distinct materials provides intriguing opportunities in modern industry applications, whereas the driving concept is to design parts with the right material in the right place [...]

APA, Harvard, Vancouver, ISO, and other styles

2

Chuaiphan, Wichan, and Loeshpahn Srijaroenpramong. "The Behaviour of Nitrogen on the Welding Parameters of the Dissimilar Weld Joints between AISI 304 and AISI 316L Austenitic Stainless Steels Produced by Gas Tungsten Arc Welding." Applied Mechanics and Materials 248 (December 2012): 395–401. http://dx.doi.org/10.4028/www.scientific.net/amm.248.395.

Full text

Abstract:

The behavior of nitrogen into the dissimilar joining metal between AISI 304 and AISI 316L Austenitic stainless steel during gas tungsten are welding process was investigated. Studied by using an arc nitrogen atmosphere – controlling in chamber. The relations between nitrogen content of the dissimilar weld metal and the welding parameters, such as the welding current, welding speed, welding arc length and penetration area of weld metals were also evaluated. The results show that the nitrogen content of the weld metals decreased with an increasing welding current, and increasing penetration areas of weld metal, but scarcely depends on the welding arc length. The nitrogen content of the weld metals increased with the welding speed, but decreased penetration areas of weld metals. The role of nitrogen content on the dissimilar weld metals stainless steel is further confirmed by the experimental microstructure, mechanical and corrosion behaviour of the weld metal.

APA, Harvard, Vancouver, ISO, and other styles

3

Venukumar, S., Muralimohan Cheepu, T. Vijaya Babu, and D. Venkateswarlu. "Cold Metal Transfer (CMT) Welding of Dissimilar Materials: An Overview." Materials Science Forum 969 (August 2019): 685–90. http://dx.doi.org/10.4028/www.scientific.net/msf.969.685.

Full text

Abstract:

In recent years, the continuous growth in manufacturing industries such as light weight structures, demands in increasing of its performance and functionality enhance the use of different materials for producing hybrid structures and thus the requirements for joining of dissimilar joints. The physical and metallurgical properties of the materials are utilised to get combined properties to achieve the product performance. On the other hand the joining methods are continuously challenging for joining of dissimilar materials. The present study reviews and describes the effective welding method of cold metal transfer for joining of dissimilar materials and its state of the art research in various materials joining. Cold metal transfer joining mechanism, capabilities of joining of dissimilar metals and their performance are reviewed. The current and emerging techniques of cold metal transfer welding method are reviewed. Methods and other technological parameters selection are described and future challenges for improving research methods on joining of dissimilar metals using cold metal transfer. Keywords: Cold Metal Transfer, MIG welding, Dissimilar materials, Mechanical properties.

APA, Harvard, Vancouver, ISO, and other styles

4

Kah, Paul, Madan Shrestha, and Jukka Martikainen. "Trends in Joining Dissimilar Metals by Welding." Applied Mechanics and Materials 440 (October 2013): 269–76. http://dx.doi.org/10.4028/www.scientific.net/amm.440.269.

Full text

Abstract:

The welding of dissimilar materials finds a wide variety of applications in the fields of industrial construction and manufacturing, where the characteristic features of the different materials are optimized for the desired application to result in cost effectiveness and value addition. Non-fusion welding methods such as solid state welding and high energy beam welding are more popular for welding dissimilar metal combinations, due to fewer complications, than fusion welding, which melts the base metal and forms brittle intermetallic compounds (IMCs) that may lead to failure. Various factors have to be considered when assessing the feasibility of welding dissimilar metals and producing a sound weld joint. This paper presents a broad classification of the most commonly used welding processes for dissimilar materials, discusses some of the commonly used welding processes with examples of some common material combinations, critical factors for good welding, and practical difficulties arising from the physical and chemical properties of materials. From the findings, it can be inferred that continuous improvement and research is still required in the field of dissimilar metal welding, particularly in the light of increasing demand for tailored material for modern engineering and industrial applications.

APA, Harvard, Vancouver, ISO, and other styles

5

Assi, Abdullah Daie'e. "Estimation of Some Mechanical Properties for Similar & Dissimilar Welded Joints." Wasit Journal of Engineering Sciences 2, no. 1 (March 8, 2014): 59–76. http://dx.doi.org/10.31185/ejuow.vol2.iss1.24.

Full text

Abstract:

This research deals with the choice of the suitable filler metal to weld the similar and dissimilar metals (Low carbon steel type A516 & Austenitic stainless steel type 316L) under constant conditions such as, plate thickness (6 mm), voltage (78 v), current (120 A), straight polarity. This research deals with three major parts. The first parts Four types of electrodes were used for welding of dissimilar metals (C.St A516 And St.St 316L) two from mild steel (E7018, E6013) and other two from austenitic stainless steel (E309L, E308L) various inspection were carried out include (Visual T., X-ray T., δ- Ferrite phase T., and Microstructures T.) and mechanical testing include (tensile T., bending T. and micro hardness T.) The second parts done by used the same parameters to welding similar metals from (C.St A516) Or (St.St 316L). The third parts deals with welding of dissimilar weldments (C.St And St.St) by two processes, gas tungsten are welding (GTAW) and shielded metal are welding (SMAW). The results indicated that the spread of carbon from low carbon steel to the welding zone in the case of welding stainless steel elect pole (E309L) led to Configuration Carbides and then high hardness the link to high values compared with the base metal. In most similar weldments showed hardness of the welding area is higher than the hardness of the base metal. The electrode (E309L) is the most suitable to welding dissimilar metals from (C.St A516 With St.St 316L). The results also showed that the method of welding (GTAW) were better than the method of welding (SMAW) in dissimilar welded joints (St.St 316L with C.St A516) in terms of irregular shape and integrity of the welding defects, as well as characterized this weldments the high-lift and resistance ductility good when using the welding conditions are similar.

APA, Harvard, Vancouver, ISO, and other styles

6

Devaraj, Jeyaganesh, Aiman Ziout, and Jaber E. Abu Qudeiri. "Dissimilar Non-Ferrous Metal Welding: An Insight on Experimental and Numerical Analysis." Metals 11, no. 9 (September 18, 2021): 1486. http://dx.doi.org/10.3390/met11091486.

Full text

Abstract:

In recent years Gas Metal Arc Welding (GMAW) technology has expanded its functionalities in various areas which have further motivated its usage in several emerging manufacturing industries. There are several issues and challenges associated with this technology, especially in dissimilar metal welding (DMW). One of the predominant challenges is selecting appropriate welding parameters which influence the efficiency of this technology. To explore several modern advancements in this expertise, this paper has done an exclusive survey on various standards of GMAW and its variants for selecting suitable parameters for welding dissimilar nonferrous metals. This review summarizes various experimental and numerical results along with related illustrations to highlight the feasibility of welding dissimilar nonferrous metals using traditional GMAW and investigations on advanced GMAW processes such as cold metal transfer (CMT) and pulsed GMAW (P-GMAW). Simulation and modeling of nonferrous DMW have identified several research gaps and modeling problems. Researchers and manufacturers can use this review as a guideline to choose appropriate welding parameters to implement GMAW and its variants for non-ferrous dissimilar welding. It found that by controlling the heat input and effective post-heat treatments, adequate joint properties can be achieved. Automated large -scale manufacturing will widen the utilization scope of GMAW and avoid some costly methods such as laser welding, ultrasonic welding, and friction stir welding etc.

APA, Harvard, Vancouver, ISO, and other styles

7

Haikal, Haikal, and Triyono Triyono. "STUDI LITERATUR PENGARUH PARAMETER PENGELASAN TERHADAP SIFAT FISIK DAN MEKANIK PADA LAS TITIK (RESISTANCE SPOT WELDING)." ROTASI 15, no. 2 (April 1, 2013): 44. http://dx.doi.org/10.14710/rotasi.15.2.44-54.

Full text

Abstract:

Resistance spot welding (RSW) is the most widely used for joining thin sheet metals in automotive industry. Various applications of dissimilar materials and thicknesses were commonly found in many spot welding processes especially in the manufacture of car body. The resistance spot welding of dissimilar materials are generally more challenge than similar materials due to differences in the physical, chemical, and mechanical properties of the base metals. Differences of materials have an impact on heat input generated at the spot welding. Diameter of the weld nugget size is influenced by several parameters such as electric current, welding time, different types of material, and the thickness of the plate. Nugget diameter will influence on physical and mechanical properties weld such as microstructure, shear strength and hardness. For practical use, various industrial standards have recommended a minimum weld size for a given sheet thickness, mostly in the form of tables. For example the American Welding Society (AWS), Society of Automotive Engineering (SAE) and the American National Standards Institute (ANSI). They were only suitable to be apllied on the similar metal and thickness joint because in this joint, symetrical nugget will be formed. Meanwhile a type of dissimilar metal that joined by spot welding method will result in the asymetrical nugget. This paper aims to review the results of researchs on the similar and dissimilar resistance spot welded joint to evaluate the use of similar metals weld parameters and standards on the dissimilar metals weld. It was determined that parameters welding such as electric current, welding time, and the standard for similar metals weld can not be applied on the dissimilar metals weld. The asymetrical nugget shape decreased shear strength on the weld nugget. The most important factor that was considered on the dissimilar metals weld to make high quality weld joint was nugget diameter. If the nugget diameter weld increased the strength of welding will increase.

APA, Harvard, Vancouver, ISO, and other styles

8

Siddhu, Vikash, Naveen Kumar, and Dr Navneet Arora. "Investigation on Dissimilar Metal Welds by Resistance Spot Welding Process." International Journal of Trend in Scientific Research and Development Volume-2, Issue-3 (April 30, 2018): 65–72. http://dx.doi.org/10.31142/ijtsrd10805.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Safari, Mehdi, Hossein Mostaan, and Abdoreza Ghaderi. "Dissimilar resistance spot welding of AISI 304 to AISI 409 stainless steels: mechanical properties and microstructural evolutions." Metallurgical Research & Technology 115, no. 6 (2018): 610. http://dx.doi.org/10.1051/metal/2018057.

Full text

Abstract:

In this work, dissimilar resistance spot welding of austenitic stainless steel sheet (304 grade) and ferritic stainless steel sheet (409 grade) is studied experimentally. For this purpose, the effects of process parameters such as welding current, welding time and electrode force on tensile-shear strength of resistance spot welded joints are investigated with response surface methodology (RSM). Also, microstructural evolutions during resistance spot welding process of AISI 409 and AISI 304 stainless steels are evaluated by optical microscopy. It is concluded from results that the tensile-shear strength of spot welds is increased with increasing the welding current, welding time and electrode force. It is shown that widmanstatten ferrites have been grown in the weld metal of dissimilar resistance spot welds of AISI 304 and AISI 409 stainless steels.

APA, Harvard, Vancouver, ISO, and other styles

10

Soysal, T., S. Kou, D. Tat, and T. Pasang. "Macrosegregation in dissimilar-metal fusion welding." Acta Materialia 110 (May 2016): 149–60. http://dx.doi.org/10.1016/j.actamat.2016.03.004.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Dissimilar metal welding"

1

Stewart, Jeffrey. "Temper Bead Welding for Dissimilar Metal Welds and Overlays." The Ohio State University, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=osu1574840746589766.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Xu, Lei. "Controlling interfacial reaction in aluminium to steel dissimilar metal welding." Thesis, University of Manchester, 2016. https://www.research.manchester.ac.uk/portal/en/theses/controlling-interfacial-reaction-in-aluminium-to-steel-dissimilar-metal-welding(721d3009-de49-434c-bd81-b01ff5973706).html.

Full text

Abstract:

Two different aluminium alloys, AA6111 (Al-Mg-Si) and AA7055 (Al-Mg-Zn), were chosen as the aluminium alloys to be welded with DC04, and two welding methods (USW and FSSW) were selected to prepare the welds. Selected pre-welded joints were then annealed at T=400 - 570oC for different times. Kinetics growth data was collected from the microstructure results, and the growth behaviour of the IMC layer was found to fit the parabolic growth law. A grain growth model was built to predict the grain size as a function of annealing time. A double-IMC phase diffusion model was applied, together with grain growth model, to predict the thickness of each phase as a function of annealing time in the diffusion process during heat treatment. In both material combinations and with both welding processes a similar sequence of IMC phase formation was observed during the solid state welding. η-Fe2Al5 was found to be the first IMC phase to nucleate. The IMC islands then spread to form a continuous layer in both material combinations. With longer welding times a second IMC phase, θ-FeAl3, was seen to develop on the aluminium side of the joints. Higher fracture energy was received in the DC04-AA6111 joints than in the DC04-AA7055 joints. Two reasons were claimed according to the microstructure in the two joints. The thicker IMC layers were observed in the DC04-AA7055 joints either before or after heat treatment, due to the faster growth rate of the θ phase. In addition, pores were left in the aluminium side near the interface as a result of the low melting point of AA7055.The modelling results for both the diffusion model and grain growth model fitted very well with the data from the static heat treatment. Grain growth occurred in both phases in the heat treatment significantly, and was found to affect the calculated activation energy by the grain boundary diffusion. At lower temperatures in the phases with a smaller grain size, the grain boundary diffusion had a more significant influence on the growth rate of the IMC phases. The activation energies for the grain boundary diffusion and lattice diffusion were calculated as 240 kJ/mol and 120 kJ/mol for the η phase, and 220 kJ/mol and 110 kJ/mol for the θ phase, respectively. The model was invalid for the growth of the discontinuous IMC layers in USW process. The diffusion model only worked for 1-Dimensional growth of a continuous layer, which was the growth behaviour of the IMC layer during heat treatment. However, due to the highly transient conditions in USW process, the IMC phases were not continuous and uniform even after a welding time of 2 seconds. Therefore, the growth of the island shaped IMC particles in USW was difficult to be predicted, unless the nucleation stage was taken into consideration.

APA, Harvard, Vancouver, ISO, and other styles

3

Zhang, kaiwen. "Experimental and Computational Investigation of Temper Bead Welding and Dissimilar Metal Welding for Nuclear Structures Repair." The Ohio State University, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=osu1469036863.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Sorensen, Daniel David. "Dissimilar Metal Joining in the Medical Device Industry." The Ohio State University, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=osu1494157928729494.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Lee, Genevieve W. "Advanced Characterization of Solid-State Dissimilar Material Joints." The Ohio State University, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=osu1492794418438023.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Wang, Yin. "A metallurgical approach for controlling interfacial reaction in aluminium to magnesium dissimilar metal welding." Thesis, University of Manchester, 2016. https://www.research.manchester.ac.uk/portal/en/theses/a-metallurgical-approach-for-controlling-interfacial-reaction-in-aluminium-to-magnesium-dissimilar-metal-welding(baf9186c-449e-44f3-9a1e-20dfde48b966).html.

Full text

Abstract:

Dissimilar welding of Al to Mg alloys could potentially find significant application in the automobile industry, if the massive production of brittle intermetallic compounds (IMCs) at the joint interface can be prevented. In order to better understand Al-Mg IMC reactions, a comprehensive investigation of the interfacial region in AA6111 - AZ31 diffusion couples was carried out in this research. Three Al-Mg binary IMCs, namely the -Al12Mg17, -AlMg and -Al3Mg2 phases, were observed to form in the Al - Mg diffusion couple. In both the Al3Mg2 and Al12Mg17 layers, residual stresses were detected. The stress components normal to the joint interface were found to be positive, which had the effect of promoting the extension of lateral cracks; while the horizontal components were compressive, which could hinder cracking in the vertical direction. As a result, the fracture resistance of the two IMCs were asymmetric with lower values along the interface than in the vertical direction. The higher stress level in the Al3Mg2 layer made it more susceptible to lateral cracking and hence becoming the weak link in the Al - Mg dissimilar joints. A potential metallurgical solution has been explored involving the introduction of Zn into the material system, so that a new intermetallic compound with better properties can be formed to replace the unfavored Al3Mg2 phase. In this research, an Al-Zn coating alloy was proposed for this purpose. To determine the optimum composition for the alloy, a numerical method that combined CALPHAD thermodynamic calculation and diffusion simulations was developed. The modelling results indicated that Al-20 at. % Zn was the optimum composition for completely suppressing the formation of Al3Mg2, and this has been verified by static diffusion and friction stir spot welding (FSSW) experiments. In both cases, the designed coating alloy was effective in changing the Al-Mg reaction path by forming the mechanically superior (Al,Zn)49Mg32 phase as a substitute for Al3Mg2. The FSS welds prepared with the Zn containing coating alloy exhibited a 6 % increase in lap shear strength, compared to the conventional Al-Mg welds. This lower than expected improvement resulted from the Zn addition reducing the liquation temperature of the material system, resulting in the production of a detrimental eutectic mixture which facilitated debonding of the welds. As a potential alternative solution, Al-Si coating material has been proposed to inhibit the growth of Al-Mg IMC layers, in which the Si phase was expected to form a partial interdiffusion barrier between the substrate materials and change the reaction path by preferentially reacting with Mg. Comparison of long-term static diffusion experiments between the Al-Si coated and Al - Mg dissimilar joints showed that the nucleation and growth of Mg2Si could change the reaction path and greatly reduce the thickness of the Al-Mg IMC layer at the joint interface. Although in actual friction stir spot welding (FSSW), Mg2Si was not formed in a detectable amounts, due to the very short reaction time, the Al-Si coating still led to a significant reduction in the IMC thickness by partially blocking the Al-Mg interdiffusion process. With the coating applied, the Al - Mg dissimilar welds exhibited enhanced mechanical performance with both their strength and fracture energy being markedly increased, through a reduction in the IMC layer thickness and the presence of Si particle toughening the reaction layer by causing crack deflection.

APA, Harvard, Vancouver, ISO, and other styles

7

Liu, Bert C. Liu. "Joining Dissimilar Structural Alloys by Vaporizing Foil Actuator Welding: Process Conditions, Microstructure, Corrosion, and Strength." The Ohio State University, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=osu1471629967.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Daniels, Thomas W. "APPLICABILITY OF COLD METAL TRANSFER FOR REPAIR OF DISSIMILAR METAL WELDS IN STAINLESS STEEL PIPING IN NUCLEAR POWER PLANTS." The Ohio State University, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=osu1429873704.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Wolcott, Paul Joseph. "Ultrasonic Additive Manufacturing: Weld Optimization for Aluminum 6061, Development of Scarf Joints for Aluminum Sheet Metal, and Joining of High Strength Metals." The Ohio State University, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=osu1449162671.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Siemssen, Brandon Raymond. "Development and Characterization of Friction Bit Joining: A New Solid State Spot Joining Technology Applied to Dissimilar Al/Steel Joints." Diss., CLICK HERE for online access, 2008. http://contentdm.lib.byu.edu/ETD/image/etd2425.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Dissimilar metal welding"

1

Kikō, Genshiryoku Anzen Kiban. Fukuzatsu keijōbu kiki haikan kenzensei jisshō (IAF) jigyō: Yōsetsu zanryū ōryoku kaiseki hyōka dēta-shū : sēfu endo izai yōsetsubu (katagawa kaisaki tsugite) = Project of integrity assessment of flawed components with structural discontinuity (IAF) : data book for residual stress analysis in weld joint : dissimilar metal weld joint in safe end (one-side groove joint). Tōkyō-to Minato-ku: Genshiryoku Anzen Kiban Kikō, 2012.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Kikō, Genshiryoku Anzen Kiban. Fukuzatsu keijōbu kiki haikan kenzensei jisshō (IAF) jigyō: Yōsetsu zanryū ōryoku kaiseki hyōka dēta-shū : yōsetsugo netsushori (PWHT) o ukeru izai yōsetsubu no moderu-ka = Project of integrity assessment of flawed components with structural discontinuity (IAF) : data book for residual stress analysis in weld joint : analysis model of dissimilar metal weld joint applied post weld heat treatment (PWHT). Tōkyō-to Minato-ku: Genshiryoku Anzen Kiban Kikō, 2012.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Sun, Zheng. Laser beam welding of austenitic-ferritic dissimilar steel joints. Lappeenranta: Lappeenranta University of Technology, 1992.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Kikō, Genshiryoku Anzen Kiban. Fukuzatsu keijōbu kiki haikan kenzensei jisshō (IAF) jigyō: Genshiro atsuryoku yōki no izai yōsetsubu ni kansuru kōon zairyō tokusei dēta-shū = Project of integrity assessment of flawed components with structural discontinuity (IAF) : material properties data book at high temperature for dissimilar metal welding in reactor pressure vessel. [Tōkyō-to Minato-ku]: Genshiryoku Anzen Kiban Kikō, 2013.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Dissimilar Metal Welding. MDPI, 2019. http://dx.doi.org/10.3390/books978-3-03921-955-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Advances in Welding Metal Alloys, Dissimilar Metals and Additively Manufactured Parts. MDPI, 2018. http://dx.doi.org/10.3390/books978-3-03897-373-7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Norman, Bailey, and Welding Institute, eds. Welding dissimilar metals. Cambridge, Eng: Welding Institute, 1986.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Ryabov, Vladimir R. Welding of Dissimilar Metals. Cambridge International Science Publishing, 2006.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Welding Dissimilar Metals: Specially Commissioned Papers. Woodhead Publishing,, 1986.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Davis, J. R., ed. Corrosion of Weldments. ASM International, 2006. http://dx.doi.org/10.31399/asm.tb.cw.9781627083393.

Full text

Abstract:

Corrosion of Weldments provides an understanding of the causes and forms of weld corrosion and the methods used to monitor and control it. It explains how welding influences the microstructure and corrosion behaviors of carbon and low-alloy steels, stainless steels, nickel-base and other nonferrous alloys, and dissimilar metal welds. It identifies the factors that contribute to corrosion-related failures of welds and describes the underlying damage mechanisms. It presents case histories documenting corrosion problems in oil and gas, chemical processing, pulp and paper, and other industries and the challenges associated with high-temperature environments. It also covers corrosion monitoring and testing methods and provides insights on making weldments more corrosion resistant. For information on the print version, ISBN 978-0-87170-841-0, follow this link.

APA, Harvard, Vancouver, ISO, and other styles

Book chapters on the topic "Dissimilar metal welding"

1

Mishra, Rajiv Sharan, Partha Sarathi De, and Nilesh Kumar. "Dissimilar Metal Friction Stir Welding." In Friction Stir Welding and Processing, 237–58. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-07043-8_8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Sahoo, Susanta Kumar, and Mantra Prasad Satpathy. "Ultrasonic Spot Welding of Dissimilar Metal Sheets." In Ultrasonic Welding of Metal Sheets, 97–158. First edition. | Boca Raton : CRC Press, 2021.: CRC Press, 2020. http://dx.doi.org/10.1201/9780429294051-5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Kim, Hwan-Tae, and Sang-Cheol Kil. "Research Trend of Dissimilar Metal Welding Technology." In Communications in Computer and Information Science, 199–204. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-35248-5_28.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Sahoo, Susanta Kumar, and Mantra Prasad Satpathy. "Thermo-Mechanical Modeling in Ultrasonic Spot Welding of Dissimilar Metal Sheets." In Ultrasonic Welding of Metal Sheets, 159–216. First edition. | Boca Raton : CRC Press, 2021.: CRC Press, 2020. http://dx.doi.org/10.1201/9780429294051-6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Sahoo, Susanta Kumar, and Mantra Prasad Satpathy. "Future Research Trends in Ultrasonic Spot Welding of Dissimilar Metal Sheets." In Ultrasonic Welding of Metal Sheets, 217–20. First edition. | Boca Raton : CRC Press, 2021.: CRC Press, 2020. http://dx.doi.org/10.1201/9780429294051-7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Sahoo, Susanta Kumar, and Mantra Prasad Satpathy. "Tool and Fixture Design for Ultrasonic Spot Welding of Dissimilar Metal Sheets." In Ultrasonic Welding of Metal Sheets, 43–80. First edition. | Boca Raton : CRC Press, 2021.: CRC Press, 2020. http://dx.doi.org/10.1201/9780429294051-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Mani, Cherish, B. Sozharajan, R. Karthikeyan, and J. Paulo Davim. "Fatigue Analysis of Dissimilar Metal Welded Joints of 316L Stainless Steel/Monel 400 Alloy Using GTAW." In Welding Technology, 369–86. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-63986-0_11.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Hwang, I. H., Takehiko Watanabe, and Y. Doi. "Dissimilar Metal Welding of Steel to Al-Mg Alloy by Spot Resistance Welding." In THERMEC 2006 Supplement, 381–86. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-429-4.381.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Wang, Tianhao, and Rajiv Mishra. "Effect of Stress Concentration on Strength and Fracture Behavior of Dissimilar Metal Joints." In Friction Stir Welding and Processing X, 33–39. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-05752-7_4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Wang, Yin, Li Wang, Joseph Robson, Basem Mohysen Al-Zubaidy, and Philip Prangnell. "Coating Design for Controlling β Phase IMC Formation in Dissimilar Al-Mg Metal Welding." In Friction Stir Welding and Processing VIII, 171–79. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2015. http://dx.doi.org/10.1002/9781119093343.ch19.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Dissimilar metal welding"

1

Mvola, B., P. Kah, and J. Martikainen. "Dissimilar ferrous-nonferrous metal welding." In 2013 International Conference on Advanced Materials and Information Technology Processing. Southampton, UK: WIT Press, 2014. http://dx.doi.org/10.2495/amitp130301.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Ming, Pang, Tan Jian-Song, Wang Jian-Ping, Wu Bo, and Jie Zhi-Min. "K418 and 42CrMo dissimilar metal laser welding." In The Pacific Rim Conference on Lasers and Electro-Optics (CLEO/PACIFIC RIM). IEEE, 2009. http://dx.doi.org/10.1109/cleopr.2009.5292680.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Niwa, Yusuke, Yousuke Kawahito, Shuji Kubota, and Seiji Katayama. "Evolution of LAMP joining to dissimilar metal welding." In ICALEO® 2008: 27th International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing. Laser Institute of America, 2008. http://dx.doi.org/10.2351/1.5061327.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Rathod, M. J., and R. L. Rithe. "Dissimilar Metal Joining by Using Friction Stir Spot Welding." In International Conference on Automotive Materials & Manufacturing 2014. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2014. http://dx.doi.org/10.4271/2014-28-0020.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Park, Seo-Jeong, Jong-Do kim, and Woong-Seong Chang. "Dissimilar metal welding titanium and steel sheet by fiber laser." In PICALO 2008: 3rd Pacific International Conference on Laser Materials Processing, Micro, Nano and Ultrafast Fabrication. Laser Institute of America, 2008. http://dx.doi.org/10.2351/1.5056997.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Wang, Xiaoyan, Lei Zhang, Yalong Wang, and Minxu Lu. "Study on Dissimilar Metal Welding Between SAF2205 and X65 Pipes." In 2008 7th International Pipeline Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/ipc2008-64191.

Full text

Abstract:

Kela-2 Gas Field is the main supply for the West-East Gas Pipeline which runs across China with length of 4000 kilometers. Natural gas from Kela-2 contains CO2/H2S sour components and 10% condensation water, which makes the medium present very strong corrosivity. In avoidance of corrosion failure, DSS SAF2205 line pipes were introduced to transmit the gas from the Gas Field to gathering center and processing factory. The DSS pipeline is totally about 13km and it is the first time DSS pipes were used largely amount in oil and gas pipeline around the world. As it is known, DSS SAF2205 pipes and traditional linepipes X65 were welded together between the gathering lines and mainline. Properties of welding joints, especially corrosion resistance, are very important for the safety of the pipeline. In this paper, the dissimilar metal joints were welded by Metal Inertia Gas Welding (MIG) with ER2209 electrodes to study and optimize welding procedure. Optical microscope, scanning electronic microscope and energy dispersive spectrometer (EDS) were employed to observe microstructure and analysis alloy elements distribution in the jointing zone between the dissimilar steels. Along the dissimilar joint, the microstructure changes from duplex characteristic combination of Ferrite and Austenite to that with Ferrite and a few Pearlite or MA. Smooth and notch tensile test and low temperature impact tests were also used to investigate mechanical properties of the dissimilar joints. Corrosion resistance of dissimilar metal joints were tested and analyzed. Weld metal produced with ER2209 presents excellent resistance to general corrosion in 1M NaCl solution. It is found that the ER2209 electrode is more suitable for producing the dissimilar weld joint according to this job.

APA, Harvard, Vancouver, ISO, and other styles

7

"Reliability of Dissimilar Metal Joints using Fusion Welding: A Review." In International Conference on Machine Learning, Electrical and Mechanical Engineering. International Institute of Engineers, 2014. http://dx.doi.org/10.15242/iie.e0114050.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Matsui, Yamato, Masahiko Otsuka, and Shigeru Itoh. "Explosive Welding of Metal Sheets." In ASME 2005 Pressure Vessels and Piping Conference. ASMEDC, 2005. http://dx.doi.org/10.1115/pvp2005-71354.

Full text

Abstract:

In this work explosive line and spot welding were used for the bonding of light-weight metal sheets. Materials involved are aluminum alloys 5052-O, 6061-T6, and 7075-T6, a magnesium alloy AZ31B-O and a commercially pure titanium (TP270C). Plates of similar and dissimilar metal combinations are explosion welded over a small overlapping area. The strength of the welds was measured using shear strength tests and the metal interface was analyzed using optical microscopy. The shear strength of the welds have been tested and appeared to high shearing strength. Explosive line and spot welding show a high strength to explosive mass ratio, making it a good candidate to be scaled up and used in commercial applications.

APA, Harvard, Vancouver, ISO, and other styles

9

Yoshida, Takeshi, Takaaki Matsuoka, Yuta Uchida, and Takashi Hirano. "Application of Magnetic Stir Welding to Dissimilar Metal Structural Weld Overlay." In 16th International Conference on Nuclear Engineering. ASMEDC, 2008. http://dx.doi.org/10.1115/icone16-48319.

Full text

Abstract:

Alloy 600 and associated welds, Alloy 82/182 of the Pressurized Water Reactor (PWR) plants have been known as being susceptible to the Primary Water Stress Corrosion Cracking (PWSCC). Dissimilar metal (DM) piping butt welds were welded with Alloy 82/182. As one of the mitigation techniques of the PWSCC, Structural Weld Overlay (SWOL) has been applied to the DM welds, but it has tendency to occur weld cracks on the first layer. One of the reasons of the weld cracks is the sulfur which is highly contained in stainless steel base metals, because old stainless steels would contain higher sulfur (e.g. 0.02%) than later ones. In response to this situation, Magnetic Stir Welding (MSW) was proposed to apply for the first layer of SWOL, and tested to evaluate its weldabilities. MSW has been developed for several years, and it is generally known that MSW has characteristics to improve a heat transfer in the molten pool, so that it could reduce a dilution. The purpose of this study is to evaluate weldabilities of MSW for welding Alloy 52 and/or Alloy 52M as filler metal on high sulfur contained stainless steel pipe. Single bead tests and all position welding tests were conducted. As a result of this study, MSW can prevent from occurring weld cracks and lack of fusion due to stirring effects of the molten pool. Therefore, SWOL can be welded without weld cracks on the first layer by applying MSW, even though the stainless steel base metal contains relatively high sulfur. In addition, MSW can weld at high wire supply rate because of prevention of lack of fusion. So it could improve weld efficiency.

APA, Harvard, Vancouver, ISO, and other styles

10

Rudland, D., T. Zhang, G. Wilkowski, and A. Csontos. "Welding Residual Stress Solutions for Dissimilar Metal Surge Line Nozzles Welds." In ASME 2008 Pressure Vessels and Piping Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/pvp2008-61285.

Full text

Abstract:

During the last year, defects had been located by ultrasonic testing in three of the pressurizer nozzle dissimilar metal (DM) welds at the Wolf Creek nuclear power plant. Understanding welding residual stress is important in the evaluation of why and how these defects occur, which in turn helps to determine the reliability of nuclear power plants. The analysis procedure in this paper included not only the pass-by-pass welding steps, but also other essential fabrication steps of pressurizer surge nozzles. Detailed welding simulation analyses have been conducted to predict the magnitude of these stresses in the weld material. Case studies were carried out to investigate the influences to main weld stress fields with different boundary conditions, material strength, weld sequencing, as well as simulation of the remaining piping system stiffness. A direct comparison of these analysis methodologies and results has been made in this paper. Weld residual stress results from nuclear industry (conducted by Dominion Engineering, Inc.) and the US NRC (conducted by Engineering Mechanics Corporation) are also compared.

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Dissimilar metal welding"

1

Daehn, Glenn S., Anupam Vivek, and Bert C. Liu. Collision Welding of Dissimilar Materials by Vaporizing Foil Actuator: A Breakthrough Technology for Dissimilar Metal Joining. Office of Scientific and Technical Information (OSTI), September 2016. http://dx.doi.org/10.2172/1416747.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

MJ Lambert. Summary of Dissimilar Metal Joining Trials Conducted by Edison Welding Institute. Office of Scientific and Technical Information (OSTI), November 2005. http://dx.doi.org/10.2172/884671.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

John N. DuPont. Review of Dissimilar Metal Welding for the NGNP Helical-Coil Steam Generator. Office of Scientific and Technical Information (OSTI), March 2010. http://dx.doi.org/10.2172/984549.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!