Relevant bibliographies by topics / Dissipation analysis

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Dissipation analysis'

Author: Grafiati
Published: 4 June 2021
Last updated: 18 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Dissipation analysis.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Dissipation analysis"

1

Wirth, Jens. "Wave equations with time-dependent dissipation I. Non-effective dissipation." Journal of Differential Equations 222, no. 2 (March 2006): 487–514. http://dx.doi.org/10.1016/j.jde.2005.07.019.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

DESMARAIS, MATHIEU, and RACHID AISSAOUI. "MODELING OF KNEE ARTICULAR CARTILAGE DISSIPATION DURING GAIT ANALYSIS." Journal of Mechanics in Medicine and Biology 08, no. 03 (September 2008): 377–94. http://dx.doi.org/10.1142/s021951940800267x.

Full text
Abstract:
Articular cartilage dissipates contact loads according to three dissipative mechanisms: frictional drag, intrinsic viscoelasticity, and surface friction. Estimation of dissipation due to these three mechanisms during gait is required to understand the dissipative properties of articular cartilage. Fourteen healthy subjects performed a gait analysis on treadmill. Tibiofemoral contact forces were estimated from inverse dynamic analysis and from a reductionist knee contact model. These contact forces and the results obtained from a preloading creep simulation were introduced into a biphasic poroviscoelastic articular cartilage model, and a one-dimensional confined compression was performed. Articular dissipation from each dissipative mechanism was estimated. Sensitivity analysis was performed to determine the effects of material parameters and length of the preloading simulation on the patterns of the dissipative mechanisms. Dissipative force patterns for all dissipative mechanisms were found to be similar to those of tibiofemoral contact forces. Frictional drag was found to be the dominant dissipative mechanism. The initial permeability and the viscoelastic spectrum parameters were found to have an important impact on the magnitude of the peaks of dissipative patterns. If appropriate material parameters are introduced, this model could be used to compare the difference between healthy and osteoarthritic human articular cartilage.
APA, Harvard, Vancouver, ISO, and other styles
3

LIANG, JIANFENG. "HYPERBOLIC SMOOTHING EFFECT FOR SEMILINEAR WAVE EQUATIONS AT A FOCAL POINT." Journal of Hyperbolic Differential Equations 06, no. 01 (March 2009): 1–23. http://dx.doi.org/10.1142/s0219891609001745.

Full text
Abstract:
For semi-linear dissipative wave equation □u + |ut|p - 1ut = 0, we consider finite energy solutions with singularities propagating along a focusing light cone. At the tip of cone, the singularities are focused and partially smoothed out under strong nonlinear dissipation, i.e. the solution gets up to 1/2 more L2 derivative after the focus. The smoothing phenomenon is in fact the result of simultaneous action of focusing and nonlinear dissipation.
APA, Harvard, Vancouver, ISO, and other styles
4

Hale, Jack K. "Dissipation and Compact Attractors." Journal of Dynamics and Differential Equations 18, no. 3 (September 2, 2006): 485–523. http://dx.doi.org/10.1007/s10884-006-9021-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Hale, Jack K. "Diffusive coupling, dissipation, and synchronization." Journal of Dynamics and Differential Equations 9, no. 1 (January 1997): 1–52. http://dx.doi.org/10.1007/bf02219051.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Zhou, Wei, Xiao Xu, and Wen Xiu Hao. "Parameters Analysis of Bracing Structure with Friction Energy Dissipation System." Applied Mechanics and Materials 541-542 (March 2014): 857–60. http://dx.doi.org/10.4028/www.scientific.net/amm.541-542.857.

Full text
Abstract:
Friction energy dissipating bracing is the kind of efficient system in reducing seismic of buildings. The main parameters are bracing stiffness and yielding displacement of friction energy dissipating devices in this system, which are important to the design of reducing seismic systems. Five-story steel frame building model with friction energy dissipating bracing in each floor is established, whose dynamic response of structure is studied when the value of main parameters is changed. The results show that the displacement of structure are decreased obviously and the acceleration of structure is first decreased and then increased when the bracing stiffness and yield displacement of friction energy dissipating devices are increased. In addition, the rational range of parameters is suggested for the design of friction energy dissipation systems.
APA, Harvard, Vancouver, ISO, and other styles
7

Lin, Xin, Huawei Wu, Zhen Liu, Baosheng Ying, Congjin Ye, Yuanjin Zhang, and Zhixiong Li. "Design and Analysis of the IGBT Heat Dissipation Structure Based on Computational Continuum Mechanics." Entropy 22, no. 8 (July 26, 2020): 816. http://dx.doi.org/10.3390/e22080816.

Full text
Abstract:
With the trend of high integration and high power of insulated gate bipolar transistor (IGBT) components, strict requirements have been placed on the heat dissipation capabilities of the IGBT devices. On the basis of traditional rectangular fins, this paper developed two new types of heat-dissipating fins to meet the high requirements of heat dissipation for the IGBT devices. One is the rectangular radiator with a groove length of 2.5 mm and a width of 0.85 mm, the other is the arc radiator with the angle of 125 arc angle, 0.8 mm arc height, and 1.4 mm circle radius. After theoretically calculating the IGBT junction temperature, numerical simulations have been implemented to verify the theoretical result. The commercial CFD software, STAR-CCM+, was employed to simulate the heat dissipation characteristics of the IGBT module under different wind speeds, power, and fin structures. By analyzing the temperature field and vector field of the IGBT module, the analysis results demonstrate that the error between the simulation result and the theoretical calculation is within 5%, which proves the feasibility of the newly designed heat-dissipating fins. When the wind speed is 12.5 m/s, the power is 110 W, the fin height is 31.2 mm, and the fin thickness is 2.3 mm, the rectangular radiator can achieve the best heat dissipation performance.
APA, Harvard, Vancouver, ISO, and other styles
8

Zhang, Wei Qiang, Li Su, Li Fang Ye, and Jian Ping Hu. "Power Dissipation Analysis of Adiabatic Circuits and Active Leakage Power Estimation in Nanometer CMOS Processes." Advanced Materials Research 121-122 (June 2010): 97–102. http://dx.doi.org/10.4028/www.scientific.net/amr.121-122.97.

Full text
Abstract:
The leakage dissipations of nano-circuits have become a critical concern. Estimating the leakage power of nano-circuits is very important in low-power design. This paper presents a new estimation technology for the active leakage dissipations of adiabatic logic circuits. Based on the power dissipation models of adiabatic circuits, active leakage dissipations are estimated by testing total leakage dissipations with additional capacitances on load nodes of the adiabatic circuits using HSPICE simulations. Taken as an example, the estimation for dynamic and active leakage power dissipations of CPAL (Complementary Pass-transistor Adiabatic Logic) circuits is demonstrated using the proposed estimation technology. The simulation results show that the proposed estimation technology can accurately estimate the active leakage dissipations of CPAL circuits with an accepted error over a wide range of frequencies.
APA, Harvard, Vancouver, ISO, and other styles
9

Tian, Bo, and Yi-Tian Gao. "Painlevé Analysis and Symbolic Computation for a Nonlinear Schrödinger Equation with Dissipative Perturbations." Zeitschrift für Naturforschung A 51, no. 3 (March 1, 1996): 167–70. http://dx.doi.org/10.1515/zna-1996-0305.

Full text
Abstract:
The nonlinear Schrödinger equations with small dissipative perturbations are of current importance in modeling weakly nonlinear dispersive media with dissipation. In this paper, the Painlevé formulation with symbolic computation is presented for one of those equations. An auto-Bäcklund transformation and some exact solutions are explicitly constructed
APA, Harvard, Vancouver, ISO, and other styles
10

Golzar, Farzin G., Geoffrey W. Rodgers, and J. Geoffrey Chase. "Spectral Analysis and Experimental Validation of a Low-Damage Hybrid Dissipater." Key Engineering Materials 763 (February 2018): 1007–13. http://dx.doi.org/10.4028/www.scientific.net/kem.763.1007.

Full text
Abstract:
Supplemental dissipation plays a vital role in reducing structural damage, repair costs, and downtime due to earthquakes. A hybrid dissipation mechanism has been developed to offer repeatable and consistent energy dissipation, while maintaining significant re-centring capability. This dissipation device consists of a viscous damper (VD) and a friction ring-spring (RS) combining rate-dependent dissipative behaviour of the viscous device with rate-independent dissipation and re-centring from the ring-spring. This approach, ensures simultaneous displacement reduction and increased self-centring potential. Spectral analysis of a single-degree-of-freedom structure has been carried out to outline the efficacy of the device and delineate the impact and contribution of each component to the overall device behaviour. A prototype hybrid device is tested comprising a viscous damper with silicone fluid and a ring-spring with peak design force of 26kN. These components are connected in a parallel configuration through a fixed outer shell and a moving coupled shaft. Experimental proof-of-concept testing for the hybrid device and single ring-spring includes sinusoidal displacement inputs with amplitude of 25 and 30 mm, loading frequencies of [0.25-1.75] Hz, and ring-spring pre-load of 21 and 34%. The overall device has a peak response force of 32kN at input velocities of ~200 mm/s. At this speed, ~20kN comes from the ring spring and ~12kN from the viscous damper. Further tests on the single viscous device are conducted using silicone oils with viscosities of 100, 500, and 1000 cSt and peak input velocities of [50-300] mm/s to evaluate the impact of viscosity on the damping force. These experimental tests are used to delineate the function of the individual components of the device and assess the behaviour of the hybrid combination, in comparison to the predicted analytical behaviour.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Dissipation analysis"

1

Førde, Olav Øyvind. "Analysis of the Turbulent Energy Dissipation." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for energi- og prosessteknikk, 2012. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-18694.

Full text
Abstract:
An investigation of the turbulent fluctuating kinetic energy dissipation in low Reynolds number channel flow is made, both analytically and numerically with means of Direct Numerical Simulation (DNS). The unsteady Navier-Stokes equations are solved at a Reynolds number of 360, based on the shear velocity and channel height, for four grid resolutions 48^3, 88^3, 128^3 and 192^3. The results are compared with data from Kim et al. (1987) [9], and good agreement is found for the 192^3 grid resolution.The viscous term in the kinetic energy equation is derived and described, from there the “isotropic” dissipation equation is shown to be the homogeneous dissipation equation which is compared with the thermodynamically correct dissipation. The results are in agreement with the findings of Bradshaw and Perot (1993) [2], with a difference of maximum ≈2.5% from the correct dissipation.The isotropic dissipation, often used as approximation in experiments, is also calculated and compared with the homogeneous dissipation. The results are un- surprisingly poor, and are only in agreement about the centerline. A comparison with an equation from the k-ε-model is also made, most as a curiosity, and also shows poor agreement.The Kolmogorov length scale is calculated from the dissipation, and it shows clear grid dependency even though the grid is smaller than the Kolmogorov length scale in the z-direction with max(∆z+/η+) = 0.8. The dissipation of the Reynolds stress components are used to create Kolmogorov length scales in x, y and z-direction. They are also grid dependent, even though max(∆z+/η+ ) ≈ 0.7. A length scale tensor analogous to the Kolmogorov length scale is proposed. It is based on the connection between the Reynolds stress equation and the turbulent fluctuating kinetic energy equation. It relaxes the grid restrictions compared to the Kolmogorov length scale, but investigation of its validity requires simulations with a super computer and is therefore not performed.
APA, Harvard, Vancouver, ISO, and other styles
2

Wang, Lipo. "Geometrical description of homogeneous shear turbulence using dissipation element analysis." Aachen : Shaker, 2008. http://d-nb.info/989018180/04.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Voller, Gordon Paul. "Analysis of heat dissipation from railway and automotive friction brakes." Thesis, Brunel University, 2003. http://bura.brunel.ac.uk/handle/2438/5558.

Full text
Abstract:
The thesis presents research into the understanding and improvement of heat dissipation from friction brakes. The investigations involved two brake types, considered to be the most thermally loaded and therefore most challenging; axle mounted high speed railway and commercial vehicle disc brakes. All three modes of heat transfer (conduction, convection and radiation) and airflow characteristics have been analysed experimentally and theoretically in order to increase the understanding of heat dissipation. Despite the very practical aspects of this research, a 'generic heat transfer approach' was applied, enabling wider engineering applications of the results. Experimental analyses conducted on a specially developed Spin Rig allowed measurements of cooling and airflow characteristics for different designs. Methodologies have been developed to determine thermal contact resistance, heat transfer coefficients, emissivity and aerodynamic (pumping) losses. Established values and relationships compared very favourably with theoretical work. Analytical, FE and CFD analyses were employed to further investigate design variations and perform sensitivity studies. Inertia dynamometer route simulations provided disc temperatures for validation of the overall work. Recommendations have been made for optimising heat dissipation, by proposing practically acceptable and economically viable design solutions. A proposed ventilated disc design efficiency ratio allows large, high speed ventilated disc designs, to be efficiently and accurately evaluated and compared, providing a valuable disc design optimisation tool. The determination of the methodologies, parameters and functions defining cooling characteristics, enable heat dissipation to be predicted confidently and accurately for brakes and other engineering assemblies at early design stages.
APA, Harvard, Vancouver, ISO, and other styles
4

Sorenson, Logan D. "Design and analysis of microelectromechanical resonators with ultra-low dissipation." Diss., Georgia Institute of Technology, 2013. http://hdl.handle.net/1853/52910.

Full text
Abstract:
This dissertation investigates dissipation in microelectromechanical (MEMS) resonators via detailed analysis and modeling of the energy loss mechanisms and provides a framework toward creating resonant devices with ultra-low dissipation. Fundamental mechanisms underlying acoustic energy loss are explored, the results of which are applied to understanding the losses in resonant MEMS devices. Losses in the materials, which set the ultimate limits of the achievable quality factor of the devices, are examined. Other sources of loss, which are determined by the design of the resonator, are investigated and applied to example resonant MEMS structures. The most critical of these designable loss mechanisms are thermoelastic dissipation (TED) and support (or anchor) loss of acoustic energy through the attachment of the MEMS device to its external environment. The dissipation estimation framework enables prediction of the quality factor of a MEMS resonator, which were accurate within a factor of close to 2 for high-frequency bulk acoustic wave MEMS resonators, and represents a signficant step forward by closing one of the largest outstanding problems in MEMS devices: how to predict the quality factor for a given device. Dissipation mitigation approaches developed herein address the most critical dominant loss mechanisms identified using the framework outlined above. These approaches include design of 1D phononic crystals (PCs) and novel 3D MEMS structures to trap and isolate vibration energy away from the resonator anchors, optimization of resonator geometry to suppress thermoelastic dissipation, and analysis of required levels of surface polish to reduce surface dissipation. Phononic crystals can be used to manipulate the properties of materials. In the case of the 1D PC linear acoustic bandgap (LAB) structures developed here, this manipulation arises from the formation of frequency stop bands, or bandgapwhich convert silicon from a material capable of supporting acoustic waves to a material which rejects acoustic propagation at frequencies in the bandgap. The careful design of these LAB structures is demonstrated to be able to enhance the quality factor and insertion loss of MEMS resonators without significant detrimental effects on the overall device performance.
APA, Harvard, Vancouver, ISO, and other styles
5

Erskine, Jon S. "Effects of welding on energy dissipation in a watertight bulkhead." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 2003. http://library.nps.navy.mil/uhtbin/hyperion-image/03Jun%5FErskine.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Wang, Lipo [Verfasser]. "Geometrical description of homogeneous shear turbulence using dissipation element analysis / Lipo Wang." Aachen : Shaker, 2008. http://d-nb.info/997762934/34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Chen, Zhong. "Cutting fluid aerosol generation and dissipation in machining process : analysis for environmental consciousness." Diss., Georgia Institute of Technology, 2001. http://hdl.handle.net/1853/17929.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Ebenbauer, Christian. "Polynomial control systems : analysis and design via dissipation inequalities and sum of squares /." Düsseldorf : VDI-Verl, 2006. http://bvbr.bib-bvb.de:8991/F?func=service&doc_library=BVB01&doc_number=014984316&line_number=0001&func_code=DB_RECORDS&service_type=MEDIA.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Bellon, Ludovic. "Vieillissement des systèmes vitreux et rapport fluctuation-dissipation." Phd thesis, Ecole normale supérieure de lyon - ENS LYON, 2001. http://tel.archives-ouvertes.fr/tel-00003649.

Full text
Abstract:

Ce travail propose une étude expérimentale au niveau fondamental du vieillissement des matériaux vitreux, en vue de valider les approches théoriques récentes sur le sujet. Dans un premier chapitre, nous introduisons ces nouveaux concepts : basés sur l'analogie verre de spin - verre structuraux, ils définissent la température effective Teff de ces systèmes faiblement mais durablement hors d'équilibre. Cette observable se mesure via le rapport fluctuation dissipation d'un tel système.



Le second chapitre est consacré à l'étude de l'effet rajeunissement-mémoire dans un polymère, le poly(methyl methacrylate) (PMMA). En s'inspirant d'expériences sur les verres de spins, nous démontrons une analogie de comportement forte sur des effets fins entre ces systèmes très différents. Une interprétation théorique en terme de paysage d'énergie hiérarchique permet de rendre compte de ces propriétés communes. Cette similitude fait du PMMA un bon candidat pour une étude du rapport fluctuation dissipation, introduite dans un troisième chapitre. Notre approche du problème, basée sur la mesure des propriétés électriques, est soigneusement analysée pour déterminer précisément les barres d'erreurs. Nous démontrons ainsi la nécessité d'améliorer le rapport signal sur bruit de notre expérience avant de tirer des conclusions.



Dans les deux derniers chapitres, nous étudions un verre colloïdal : la Laponite. La mesure de Teff à l'aide des propriétés électriques de ce système, en suivant le protocole du troisième chapitre, met cette fois en évidence une nette violation du théorème fluctuation dissipation, en accord avec les théories récentes sur le vieillissement. Pour tester le caractère intrinsèque de cette température effective, nous en proposons finalement une seconde détermination à l'aide des propriétés rhéologiques du matériau. Un rhéomètre ultra-sensible est ainsi conçu, et les résultats préliminaires de cette expérience sont présentés.

APA, Harvard, Vancouver, ISO, and other styles
10

Buisson, Lionel. "Intermittence pendant le vieillissement et relation fluctuation dissipation." Phd thesis, Ecole normale supérieure de lyon - ENS LYON, 2003. http://tel.archives-ouvertes.fr/tel-00005035.

Full text
Abstract:
Une étude expérimentale du vieillissement des matériaux vitreux,
basée sur l'analogie entre verres de spin et verres structuraux, a
été réalisée en introduisant une température effective Teff
pour ces systèmes faiblement hors équilibre. Cette nouvelle
observable se mesure via le rapport fluctuation dissipation.

La mesure de Teff sur les propriétés diélectriques d'un verre
polymérique (polycarbonate) après une trempe sous la température
de transition vitreuse montre que le théorème fluctuation
dissipation est fortement violé. L'amplitude et la persistance
dans le temps de cette violation sont des fonctions décroissantes
de la fréquence. Autour de 1 Hz, elle persiste plusieurs heures.
L'origine de la violation semble être due à une dynamique
fortement intermittente caractérisée par de grandes fluctuations.
Cette intermittence semble dépendre de la vitesse de trempe et de
la température d'arrêt. Une interprétation théorique basée sur le
modèle en piège permet de rendre compte de cette dynamique.

Un comportement intermittent très similaire a été observé pour un
verre colloïdal (Laponite) pendant la transition de l'état liquide
à l'état solide alors qu'aucune violation ou intermittence n'ont
été observées après une trempe lente réalisée sur un autre verre
polymérique, le poly(méthyl méthacrylate) (PMMA).

Nous présentons également une mesure mécanique préliminaire de la
relation fluctuation dissipation sur une tige de polycarbonate à
l'aide d'un interféromètre de Nomarski à deux bras.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Dissipation analysis"

1

Yee, H. C. Entropy splitting and numerical dissipation. Moffett Field, Calif: National Aeronautics and Space Administration, Ames Research Center, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Yee, H. C. Entropy splitting and numerical dissipation. Moffett Field, Calif: National Aeronautics and Space Administration, Ames Research Center, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Hu, F. Q. Low-dissipation and -disperson Runge-Kutta schemes for computational acoustics. Hampton, VA: Institute for Computer Applications in Science and Engineering, NASA Langley Research Center, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Lozano, Rogelio, Bernard Brogliato, Olav Egeland, and Bernhard Maschke. Dissipative Systems Analysis and Control. London: Springer London, 2000. http://dx.doi.org/10.1007/978-1-4471-3668-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Brogliato, Bernard, Rogelio Lozano, Bernhard Maschke, and Olav Egeland. Dissipative Systems Analysis and Control. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-19420-8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Brogliato, Bernard, Bernhard Maschke, Rogelio Lozano, and Olav Egeland. Dissipative Systems Analysis and Control. London: Springer London, 2007. http://dx.doi.org/10.1007/978-1-84628-517-2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Liu, Zhuangyi. Semigroups associated with dissipative systems. Boca Raton: Chapman & Hall/CRC, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Derivations, dissipations, and group actions on C*-algebras. Berlin: Springer-Verlag, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Quantum mechanics of non-Hamiltonian and dissipative systems. Amsterdam: Elsevier, 2008.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Japan) RIMS Workshop on "Pattern Formation Problems in Dissipative Systems" and "Mathematical Modeling and Analysis for Nonlinear Phenomena" (2007 Kyoto. Workshops on "pattern formation problems in dissipative systems" and "mathematical modeling and analysis for nonlinear phenomena.". Kyoto, Japan: Research Institute for Mathematical Sciences, Kyoto University, 2007.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Dissipation analysis"

1

Ercan, İlke, and Neal G. Anderson. "Modular Dissipation Analysis for QCA." In Field-Coupled Nanocomputing, 357–75. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-662-45908-9_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Ercan, İlke, and Neal G. Anderson. "Modular Dissipation Analysis for QCA." In Field-Coupled Nanocomputing, 357–75. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-662-43722-3_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Hackl, Klaus, Alexander Mielke, and Dirk Mittenhuber. "Dissipation distances in multiplicative elastoplasticity." In Analysis and Simulation of Multifield Problems, 87–100. Berlin, Heidelberg: Springer Berlin Heidelberg, 2003. http://dx.doi.org/10.1007/978-3-540-36527-3_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Schaefer, Philip, Markus Gampert, Jens Henrik Goebbert, and Norbert Peters. "Dissipation Element Analysis of Inhomogenous Turbulence." In Computational Fluid Dynamics 2010, 717–22. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-17884-9_91.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Fašangová, Eva, and Jan Prüss. "Evolution Equations with Dissipation of Memory Type." In Topics in Nonlinear Analysis, 213–50. Basel: Birkhäuser Basel, 1999. http://dx.doi.org/10.1007/978-3-0348-8765-6_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Khandekar, M. L. "Wave Generation, Propagation and Dissipation." In Operational Analysis and Prediction of Ocean Wind Waves, 28–42. New York, NY: Springer New York, 1989. http://dx.doi.org/10.1007/978-1-4613-8952-1_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Xu, Weilin. "Mesoscale Analysis of Flood Discharge and Energy Dissipation." In Mesoscale Analysis of Hydraulics, 157–78. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-9785-5_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Varst, P. G. Th, and G. With. "Dissipation Analysis of Interface Failure of Bimaterials." In Interfacial Science in Ceramic Joining, 295–310. Dordrecht: Springer Netherlands, 1998. http://dx.doi.org/10.1007/978-94-017-1917-9_25.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Bui, Tang Bao Ngoc, and Michael Reissig. "The Interplay Between Time-dependent Speed of Propagation and Dissipation in Wave Models." In Fourier Analysis, 9–45. Cham: Springer International Publishing, 2013. http://dx.doi.org/10.1007/978-3-319-02550-6_2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Bemporad, G. A., and S. Clementel. "Probabilistic Analysis of the Availability of a Hydrological Forecasting System (HFS)." In Entropy and Energy Dissipation in Water Resources, 205–13. Dordrecht: Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-011-2430-0_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Dissipation analysis"

1

Long, Marshall, Sebastian A. Kaiser, and Jonathan H. Frank. "Imaging Scalar Dissipation in Flames." In Laser Applications to Chemical, Security and Environmental Analysis. Washington, D.C.: OSA, 2006. http://dx.doi.org/10.1364/lacsea.2006.mb1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Blaser, Stéphane, Alfredo Bismuto, Tobias Gresch, Romain Terazzi, and Antoine Muller. "Low dissipation quantum cascade lasers progresses." In Laser Applications to Chemical, Security and Environmental Analysis. Washington, D.C.: OSA, 2016. http://dx.doi.org/10.1364/lacsea.2016.lth3e.3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Rincon, M. A., H. R. Clark, J. Límaco, A. Silva, Theodore E. Simos, George Psihoyios, and Ch Tsitouras. "Effect of Moving Boundaries on Burgers Equation with Dissipation." In Numerical Analysis and Applied Mathematics. AIP, 2007. http://dx.doi.org/10.1063/1.2790181.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Zhang, Yapeng, Xu Hu, Xi Feng, Yi Hu, and Xiaoke Tang. "An Analysis of Power Dissipation Analysis and Power Dissipation optimization Methods in Digital Chip Layout Design." In 2019 IEEE 19th International Conference on Communication Technology (ICCT). IEEE, 2019. http://dx.doi.org/10.1109/icct46805.2019.8946994.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

ARIMITSU, TOSHIHICO. "CAN “QUANTUMNESS” BE AN ORIGIN OF DISSIPATION?" In Proceedings of the RIMS Workshop on Infinite-Dimensional Analysis and Quantum Probability. WORLD SCIENTIFIC, 2003. http://dx.doi.org/10.1142/9789812705242_0006.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

ZHOU, Yu, YAN Chao, and Kang Hong-lin. "Numerical Dissipation Effect Analysis of Upwind Schemes." In 46th AIAA Aerospace Sciences Meeting and Exhibit. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2008. http://dx.doi.org/10.2514/6.2008-759.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Sheela-Francisca, J., and C. P. Tso. "An analysis of a viscous dissipation flow." In THE 4TH INTERNATIONAL MEETING OF ADVANCES IN THERMOFLUIDS (IMAT 2011). AIP, 2012. http://dx.doi.org/10.1063/1.4704241.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Zakharov, V. E., A. O. Korotkevich, A. O. Prokofiev, Theodore E. Simos, George Psihoyios, and Ch Tsitouras. "On Dissipation Function of Ocean Waves due to Whitecapping." In NUMERICAL ANALYSIS AND APPLIED MATHEMATICS: International Conference on Numerical Analysis and Applied Mathematics 2009: Volume 1 and Volume 2. AIP, 2009. http://dx.doi.org/10.1063/1.3241292.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Wang, Hong, Daming Chen, Liyu Shen, and Yong Wang. "Comprehensive Study on Energy Dissipation Performances of Two-Layer Porous Energy Dissipation Plate." In ASME 2010 29th International Conference on Ocean, Offshore and Arctic Engineering. ASMEDC, 2010. http://dx.doi.org/10.1115/omae2010-20962.

Full text
Abstract:
In this paper, we introduce a new type of two-layer porous energy dissipation plate breakwater, consisting of one upper porous plate and a lower plate. The system is used to control energy dissipation in breakwaters. The structure performance of dissipating waves has been investigated in detail in the regular wave tests. The factors identified with the characteristics of the energy dissipation plate are discussed, such as the relative width (B/L), the relative hole-size (A/A0) and the wave steepness (H/L). The comparison and analysis of the energy dissipation coefficients with respect to different factors are presented. Model test results indicate that the two-layer porous energy dissipation system is effective in dissipating a significant amount of wave energy.
APA, Harvard, Vancouver, ISO, and other styles
10

Wright, Steven J., Donald D. Carpenter, and Amy L. Cunningham. "Laboratory Model Studies of Wave Energy Dissipation in Harbors." In Fourth International Symposium on Ocean Wave Measurement and Analysis. Reston, VA: American Society of Civil Engineers, 2002. http://dx.doi.org/10.1061/40604(273)116.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Dissipation analysis"

1

LI, Chunyu, Jing WU, and Luqi XIE. SEISMIC PERFORMANCE ANALYSIS OF FABRICATED CONCRETE FRAME WITH REPLACEABLE ENERGY DISSIPATION CONNECTORS. The Hong Kong Institute of Steel Construction, December 2018. http://dx.doi.org/10.18057/icass2018.p.106.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Manzini, Gianmarco, Hashem Mohamed Mourad, Paola Francesca Antonietti, Italo Mazzieri, and Marco Verani. The arbitrary-order virtual element method for linear elastodynamics models. Convergence, stability and dispersion-dissipation analysis. Office of Scientific and Technical Information (OSTI), May 2020. http://dx.doi.org/10.2172/1630838.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Sherwood, C. R., W. E. Asher, and A. S. Ogston. Estimation of turbulence-dissipation rates and gas-transfer velocities in a surf pool: Analysis of the results from WABEX-93. Office of Scientific and Technical Information (OSTI), July 1995. http://dx.doi.org/10.2172/100414.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Moum, James N. Nonlinear Internal Waves - A Wave-Tracking Experiment to Assess Nonlinear Internal Wave Generation, Structure, Evolution and Dissipation over the NJ Shelf / Analysis. Fort Belvoir, VA: Defense Technical Information Center, September 2008. http://dx.doi.org/10.21236/ada534110.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Brooks, J. N., D. N. Ruzic, D. B. Hayden, and R. B. Jr Turkot. Surface erosion issues and analysis for dissipative divertors. Office of Scientific and Technical Information (OSTI), August 1994. http://dx.doi.org/10.2172/10158166.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

PRACTICAL ANALYSIS AND DESIGN OF A FLEXIBLE ENERGY-DISSIPATING STRUCTURE. The Hong Kong Institute of Steel Construction, December 2018. http://dx.doi.org/10.18057/icass2018.p.022.

Full text
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Dissipation analysis' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography