To see the other types of publications on this topic, follow the link: Distributed parameters line model.

Dissertations / Theses on the topic 'Distributed parameters line model'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 41 dissertations / theses for your research on the topic 'Distributed parameters line model.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Chaiwan, Pramote. "NEW ACCURATE FAULT LOCATION ALGORITHM FOR PARALLEL TRANSMISSION LINES." UKnowledge, 2011. http://uknowledge.uky.edu/gradschool_diss/813.

Full text
Abstract:
Electric power systems have been in existence for over a century. Electric power transmission line systems play an important role in carrying electrical power to customers everywhere. The number of transmission lines in power systems is increasing as global demand for power has increased. Parallel transmission lines are widely used in the modern transmission system for higher reliability. The parallel lines method has economic and environmental advantages over single circuit. A fault that occurs on a power transmission line will cause long outage time if the fault location is not located as qu
APA, Harvard, Vancouver, ISO, and other styles
2

Bukvišová, Zuzana. "Modelování rychlých přechodných dějů." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2017. http://www.nusl.cz/ntk/nusl-316921.

Full text
Abstract:
This thesis deals with the high speed transient modelling in the electrical networks. The introduction of this work discusses mathematical models of the individual devices used in the system and focuses on the line representation. It also contains a more detailed description of Bergeron and frequency dependent line model. The objective of this thesis is to design a network model using ATP-EMTP simulation program. In this model, the switching overvoltage caused by shunt reactor switching and lightning overvoltage are simulated. The thesis thoroughly describes the settings of the components used
APA, Harvard, Vancouver, ISO, and other styles
3

Belhocine, Mohamed. "Modélisation et analyse structurelle du fonctionnement dynamique des systèmes électriques." Thesis, Université Paris-Saclay (ComUE), 2016. http://www.theses.fr/2016SACLN047/document.

Full text
Abstract:
Cette thèse traite des problématiques relatives à la modélisation, l’analyse et la simulation des systèmes électriques interconnectés. Elle a été principalement motivée par le besoin de comprendre et de clarifier les niveaux de modélisation de certains composants électriques comme les lignes de transmission ainsi que leur habilité à reproduire les différents phénomènes qui présentent un intérêt dans le système. En effet, pour faciliter les études et les simulations, les modèles les plus détaillés et les plus complexes sont généralement remplacés par des modèles plus simples selon le type des p
APA, Harvard, Vancouver, ISO, and other styles
4

Nizamiev, Kamil. "Stochastic Galerkin Model Updating of Randomly Distributed Parameters." University of Akron / OhioLINK, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=akron1302884328.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Pokhrel, Prafulla. "Estimation Of Spatially Distributed Model Parameters Using A Regularization Approach." Thesis, The University of Arizona, 2007. http://hdl.handle.net/10150/193379.

Full text
Abstract:
The high dimensionality of the parameter search space can be solved by the introduction of additional information about the parameters. In this research the information contained in the apriori parameter estimates, derived using the Koren approach (Koren et al. 2000), was used to identify regularization equations that constrain the parameter variability during the calibration process and reduce the dimension of the calibration problem. The study of spatial variability of apriori parameters with respect to the NRCS based curve numbers and the depth of soil showed some recognizable trends that c
APA, Harvard, Vancouver, ISO, and other styles
6

VENTURINI, VIRGINIA. "A NEW METHODOLOGY TO INTEGRATE PARAMETERS IN LUMPED MODELS." University of Cincinnati / OhioLINK, 2001. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1006882648.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Pihnastyi, O. M., and R. O. Korsun. "The kinetic model of the production line." Thesis, Місто, 2017. http://repository.kpi.kharkov.ua/handle/KhPI-Press/48623.

Full text
Abstract:
The paper discusses methods of constructing the kinetic equation of the technology process. The article presents a model of the interaction of objects of labour with technological equipment, which is the basis for the derivation of the kinetic equation. To describe the state of the production line introduced numerical characteristics.
APA, Harvard, Vancouver, ISO, and other styles
8

Karameh, Fadi Nabih. "On-line identification and control algorithm for system model with jump parameters using wavelets." Thesis, Massachusetts Institute of Technology, 1996. http://hdl.handle.net/1721.1/11019.

Full text
Abstract:
Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 1996.<br>Includes bibliographical references (leaves 73-75).<br>by Fadi Nabih Karameh.<br>M.S.
APA, Harvard, Vancouver, ISO, and other styles
9

Dheedan, Amer Abdaladeem. "Distributed on-line safety monitor based on safety assessment model and multi-agent system." Thesis, University of Hull, 2012. http://hydra.hull.ac.uk/resources/hull:6065.

Full text
Abstract:
On-line safety monitoring, i.e. the tasks of fault detection and diagnosis, alarm annunciation, and fault controlling, is essential in the operational phase of critical systems. Over the last 30 years, considerable work in this area has resulted in approaches that exploit models of the normal operational behaviour and failure of a system. Typically, these models incorporate on-line knowledge of the monitored system and enable qualitative and quantitative reasoning about the symptoms, causes and possible effects of faults. Recently, monitors that exploit knowledge derived from the application o
APA, Harvard, Vancouver, ISO, and other styles
10

Trimarchi, Biagio. "Distributed Identification of a Network Model for Pandemic Spreading." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2021.

Find full text
Abstract:
The recent outburst of the Covid-19 epidemic has made clear the necessity of developing dynamical models for the prediction and the control of large scale epidemic systems. Due to the large impact they have on the life of people and on the economy of the countries, it is extremely important to design models that are able to predict the evolution of such complex phenomena. In the thesis a compartmental model for epidemics is developed and implemented in a Python toolbox suited for distributed computation. Based on the proposed model and on available data, an identification algorithm, based on a
APA, Harvard, Vancouver, ISO, and other styles
11

Eck, Vinzenz Gregor. "Arterial Flow and Pulse Wave Propagation in one dimensional Arterial Networks with Statistically Distributed Model Parameters." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for konstruksjonsteknikk, 2012. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-19311.

Full text
Abstract:
Parametric uncertainty in blood flow simulations of cardiovascular systems has received little attention, although methods for blood flow simulation has been subject of many studies. This work presents the implementation and assessment of a method for one dimensional flow and pressure wave simulations in arterial networks with statistically distributed model parameters. The pressure and flow waves in the arterial system are characterized by means of cross-sectionally averaged 1D governing equations for mass and momentum, discretized with a MacCormack scheme (explicit and second order in time a
APA, Harvard, Vancouver, ISO, and other styles
12

MORADI, MONA. "Development of lumped parameters models for aerostatic gas bearings." Doctoral thesis, Politecnico di Torino, 2019. http://hdl.handle.net/11583/2733954.

Full text
APA, Harvard, Vancouver, ISO, and other styles
13

Petrone, Raffaele. "Electrochemical Impedance Spectroscopy for the on-board diagnosis of PEMFC via on-line identification of Equivalent Circuit Model parameters." Doctoral thesis, Universita degli studi di Salerno, 2014. http://hdl.handle.net/10556/1476.

Full text
Abstract:
2012 - 2013<br>Proton Exchange Membrane, also named Polymer Electrolyte Membrane fuel cells (PEMFC) are interesting devices for energy conversion. Their development is due to the high efficiency, acceptable power density, quick start-up and good environmental compatibility. On the other hand, reliability cost and durability are the main challenges for PEM fuel cell commercialization. In 2010 the American Department of Energy (DoE) sets a target of 40000 hours for stationary and 5000 hours for automotive applications, respectively. Actually, these standards are considered as the mainly re
APA, Harvard, Vancouver, ISO, and other styles
14

Carvalho, Carolina Goulart de [UNESP]. "Características dos parâmetros do condutor equivalente a um feixe de subcondutores de linhas de transmissão: análise inicial." Universidade Estadual Paulista (UNESP), 2007. http://hdl.handle.net/11449/87127.

Full text
Abstract:
Made available in DSpace on 2014-06-11T19:22:33Z (GMT). No. of bitstreams: 0 Previous issue date: 2007-11-30Bitstream added on 2014-06-13T20:27:56Z : No. of bitstreams: 1 carvalho_cg_me_ilha.pdf: 1013674 bytes, checksum: 2251b87eda27daaaa94e554489ebe5d0 (MD5)<br>Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)<br>O objetivo deste trabalho é desenvolver uma metodologia para definir um condutor equivalente para um condutor múltiplo. O método baseia-se no fato de que os parâmetros dos subcondutores estão distribuídos ao longo do comprimento dos mesmos e, deste modo, cada subc
APA, Harvard, Vancouver, ISO, and other styles
15

Benharrat, Nassim. "Model-Based Testing of Timed Distributed Systems : A Constraint-Based Approach for Solving the Oracle Problem." Thesis, Université Paris-Saclay (ComUE), 2018. http://www.theses.fr/2018SACLC021/document.

Full text
Abstract:
Le test à base de modèles des systèmes réactifs est le processus de vérifier si un système sous test (SUT) est conforme à sa spécification. Il consiste à gérer à la fois la génération des données de test et le calcul de verdicts en utilisant des modèles. Nous spécifions le comportement des systèmes réactifs à l'aide des systèmes de transitions symboliques temporisées à entrée-sortie (TIOSTS). Quand les TIOSTSs sont utilisés pour tester des systèmes avec une interface centralisée, l'utilisateur peut ordonner complètement les événements (i.e., les entrées envoyées au système et les sorties produ
APA, Harvard, Vancouver, ISO, and other styles
16

Mrákava, Petr. "Realizace počítačových modelů vedení pro PLC." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218227.

Full text
Abstract:
The subject of this thesis is to become familiar with the different parameters describing the lines, and the possibility of modeling data and power models. The thesis also outlined the difference in the mechanical structure of different types of cables. The practical part focuses only on the power cables and measure their basic parameters. Then is created computer model which describes the behavior of cable lines at higher frequencies than are primarily intended. The final section is an experimental network created by the PLC for remote reading of electricity meters, and it measured different
APA, Harvard, Vancouver, ISO, and other styles
17

Tubychko, K. V., and O. M. Pihnastyi. "About the methods of formalization of technological process." Thesis, Брама, 2016. http://repository.kpi.kharkov.ua/handle/KhPI-Press/48303.

Full text
Abstract:
There are mass, serial and single types of production are determined by the coefficient of consolidation of operations at the workplace (GOST 3.1121.84). Mass production is characterized by a type of highly specialized departments and sections on output, limited and stable for a long period of the time range of products. The main objective of planning is to ensure the movement of workpieces on at a given pace of operations. A significant part of the calendar-planned regulations for the type of mass production is sustainable and just laid the basis for the planned regulations of the production
APA, Harvard, Vancouver, ISO, and other styles
18

Carvalho, Carolina Goulart de. "Características dos parâmetros do condutor equivalente a um feixe de subcondutores de linhas de transmissão : análise inicial /." Ilha Solteira : [s.n.], 2007. http://hdl.handle.net/11449/87127.

Full text
Abstract:
Orientador: Sérgio Kurokawa<br>Banca: Mariângela de Carvalho Bovolato<br>Banca: Humberto Mendes Mazzini<br>Resumo: O objetivo deste trabalho é desenvolver uma metodologia para definir um condutor equivalente para um condutor múltiplo. O método baseia-se no fato de que os parâmetros dos subcondutores estão distribuídos ao longo do comprimento dos mesmos e, deste modo, cada subcondutor deve ser tratado como uma linha de transmissão. Inicialmente são obtidas as relações entre as correntes e tensões nos dois terminais de cada subcondutor. Em seguida, considera-se que a corrente no condutor múltipl
APA, Harvard, Vancouver, ISO, and other styles
19

Cecchinato, Alessio. "Analysis of piglet survival in a dry-cured ham-producing crossbred line." Doctoral thesis, Università degli studi di Padova, 2009. http://hdl.handle.net/11577/3427332.

Full text
Abstract:
Piglet death during the perinatal and lactation periods is one of the most detectable causes of reduced production efficiency in swine herds. and it has also been identified as an important welfare issue. Piglet mortality within the first three days of life is still a problem in intensive farms. Mortality rates vary between 10 and 20% depending on the housing system. Data used in this study were collected in the nucleus and sib testing program of the C21 Large White boar line (Gorzagri, Fonzaso, Italy) from 2000 to 2006. In the selection nucleus farm (Riese Pio X, Italy) the pure C21 boars are
APA, Harvard, Vancouver, ISO, and other styles
20

Schoene, Jens. "Analysis of parameters of rocket-triggered lightning measured during the 1999 and 2000 Camp Blanding experiment and modeling of electric and magnetic field derivatives using the transmission line model." [Gainesville, Fla.] : University of Florida, 2002. http://purl.fcla.edu/fcla/etd/UFE1000160.

Full text
Abstract:
Thesis (M.S.)--University of Florida, 2002.<br>Title from title page of source document. Document formatted into pages; contains viii, 184 p.; also contains graphics. Includes vita. Includes bibliographical references.
APA, Harvard, Vancouver, ISO, and other styles
21

Wang, Chen. "Renewable Energy Integrated Power System Stability Assessment with Validated System Model Based on PMU Measurements." Diss., Virginia Tech, 2019. http://hdl.handle.net/10919/101015.

Full text
Abstract:
Renewable energy is playing an increasingly significant role in power system operation and stability assessment with its numerous penetration expansion. This is not only brought by its uncertain power output and inverter-based equipment structures but also its operation characteristics like Low Voltage Ride Through (LVRT). It is thus necessary to take these characteristics into consideration and further to find more adaptive schemes to implement them for more effective analysis and safer power system operation. All the aforementioned is based on the accurate identification of the system fundam
APA, Harvard, Vancouver, ISO, and other styles
22

Huang, Renke. "Seamless design of energy management systems." Diss., Georgia Institute of Technology, 2015. http://hdl.handle.net/1853/53518.

Full text
Abstract:
The contributions of the research are (a) an infrastructure of data acquisition systems that provides the necessary information for an automated EMS system enabling autonomous distributed state estimation, model validation, simplified protection, and seamless integration of other EMS applications, (b) an object-oriented, interoperable, and unified component model that can be seamlessly integrated with a variety of applications of the EMS, (c) a distributed dynamic state estimator (DDSE) based on the proposed data acquisition system and the object-oriented, interoperable, and unified component
APA, Harvard, Vancouver, ISO, and other styles
23

Li, Zeyuan. "Target localization using RSS measurements in wireless sensor networks." Thesis, University of Edinburgh, 2018. http://hdl.handle.net/1842/31356.

Full text
Abstract:
The subject of this thesis is the development of localization algorithms for target localization in wireless sensor networks using received signal strength (RSS) measurements or Quantized RSS (QRSS) measurements. In chapter 3 of the thesis, target localization using RSS measurements is investigated. Many existing works on RSS localization assumes that the shadowing components are uncorrelated. However, here, shadowing is assumed to be spatially correlated. It can be shown that localization accuracy can be improved with the consideration of correlation between pairs of RSS measurements. By line
APA, Harvard, Vancouver, ISO, and other styles
24

Ходусов, Валерий Дмитриевич, та Олег Михайлович Пигнастый. "Об основных направлениях исследований в статистической теории производственных систем". Thesis, Харківський національний університет ім. В. Н. Каразіна, 2016. http://repository.kpi.kharkov.ua/handle/KhPI-Press/48798.

Full text
APA, Harvard, Vancouver, ISO, and other styles
25

Ходусов, Валерий Дмитриевич, та Олег Михайлович Пигнастый. "Об основных методах проектирования систем программного управления параметрами поточных линий". Thesis, Харківський національний університет ім. В. Н. Каразіна, 2018. http://repository.kpi.kharkov.ua/handle/KhPI-Press/47875.

Full text
APA, Harvard, Vancouver, ISO, and other styles
26

Girinon, Sylvain. "Étude de la stabilité et de la qualité des réseaux distribués de puissance." Thesis, Toulouse, INPT, 2010. http://www.theses.fr/2010INPT0010/document.

Full text
Abstract:
L'émergence et le développement des systèmes électriques de ces vingt dernières années nous ont conduits à l'élaboration d'architectures de plus en plus complexes. Nous les retrouvons notamment au niveau d'applications embarquées ainsi qu'au cœur de réseaux de distribution isolés. L'intégration de nombreux équipements de différentes natures soulève la problématique de la stabilité. C'est dans ce contexte que s'insèrent ces travaux de thèse, qui aboutissent sur la mise en œuvre de méthodes d'analyse de la stabilité et de la qualité des réseaux distribués de puissance. Les études menées au cours
APA, Harvard, Vancouver, ISO, and other styles
27

Luna, Pacho Julio Alberto. "Development of control systems and state observers for efficiency and durability improvement in PEM fuel cell based systems." Doctoral thesis, Universitat Politècnica de Catalunya, 2017. http://hdl.handle.net/10803/458885.

Full text
Abstract:
Proton exchange membrane (PEM) fuel cells, which use hydrogen as fuel, provide high power densities while operating at lower temperatures, reducing the cost of materials and maintenance. PEM fuel cells are suitable for a broad range of applications, such as stationary, combined heat and power (CHP), portable systems and automotive. Performance and degradation in PEM fuel cell-based systems is greatly influenced by the internal conditions of the fuel cell. In this doctoral thesis, an extensive study of modelling, observation and control strategies of a PEM fuel cell-based system is performed.
APA, Harvard, Vancouver, ISO, and other styles
28

Федосеєнко, Олена Миколаївна. "Визначення електричних характеристик заземлювальних пристроїв електроустановок на основі повного моделювання об'ємних заземлювачів". Thesis, Національний технічний університет "Харківський політехнічний інститут", 2018. http://repository.kpi.kharkov.ua/handle/KhPI-Press/38602.

Full text
Abstract:
Дисертація на здобуття наукового ступеня кандидата технічних наук за спеціальністю 05.14.02 – електричні станції, мережі і системи. – Національний технічний університет "Харківський політехнічний інститут", Харків, 2018 р. Дисертацію присвячено вдосконаленню заземлюючих пристроїв електроустановок шляхом оптимізації конструктивних параметрів складних комбінованих заземлювачів за допомогою використання штучних електродів заземлення підвищеної провідності розтіканню, а також детального врахування природних зосереджених заземлювачів. В роботі виконано аналіз математичних моделей заземлюючих прис
APA, Harvard, Vancouver, ISO, and other styles
29

Konečný, Martin. "Webový editor textů s podporou souběžné práce více uživatelů." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2010. http://www.nusl.cz/ntk/nusl-237113.

Full text
Abstract:
Real-time collaboration editing is research area that has been studied for over 20 years. It involves multiple users editing a document such as plain-text, rich-text or an image concurrently over a high-latency network. Many problems involving consistency between users are associated with concurrent document editing, and an innovative technique called Operational Transformation developed by the GROVE (GRoup Outline Viewing Editor) system in 1989 addresses some of these issues. This paper will compare and contrast current implementations of real-time collaborative editors, and on the basis of t
APA, Harvard, Vancouver, ISO, and other styles
30

Федосеєнко, Олена Миколаївна. "Визначення електричних характеристик заземлювальних пристроїв електроустановок на основі повного моделювання об'ємних заземлювачів". Thesis, Національний технічний університет "Харківський політехнічний інститут", 2018. http://repository.kpi.kharkov.ua/handle/KhPI-Press/38531.

Full text
Abstract:
Дисертація на здобуття наукового ступеня кандидата технічних наук за спеціальністю 05.14.02 – електричні станції, мережі і системи. – Національний технічний університет "Харківський політехнічний інститут", Харків, 2018 р. Дисертацію присвячено вдосконаленню заземлюючих пристроїв електроустановок шляхом оптимізації конструктивних параметрів складних комбінованих заземлювачів за допомогою використання штучних електродів заземлення підвищеної провідності розтіканню, а також детального врахування природних зосереджених заземлювачів. В роботі виконано аналіз математичних моделей заземлюючих прист
APA, Harvard, Vancouver, ISO, and other styles
31

Пигнастый, Олег Михайлович. "Положения предметно-кинетической теории производственных систем с поточным методом организации производства". Thesis, Біла К. О, 2015. http://repository.kpi.kharkov.ua/handle/KhPI-Press/48949.

Full text
APA, Harvard, Vancouver, ISO, and other styles
32

Espinoza, Cruz Miguel Ángel. "Representação de linhas de transmissão bifásicas : um modelo a parâmetros discretos, desenvolvido diretamente no domínio das fases, que leva em conta o efeito da frequência sobre os parâmetros longitudinais /." Universidade Estadual Paulista (UNESP), 2018. http://hdl.handle.net/11449/152813.

Full text
Abstract:
Submitted by MIGUEL ANGEL ESPINOZA CRUZ null (maecuni2006i@gmail.com) on 2018-02-25T13:46:23Z No. of bitstreams: 1 Dissertação.pdf: 5516624 bytes, checksum: a926e8b18f63107cea2ad701b1023b13 (MD5)<br>Approved for entry into archive by Cristina Alexandra de Godoy null (cristina@adm.feis.unesp.br) on 2018-02-26T13:14:09Z (GMT) No. of bitstreams: 1 espinozacruz_ma_me_ilha.pdf: 5516624 bytes, checksum: a926e8b18f63107cea2ad701b1023b13 (MD5)<br>Made available in DSpace on 2018-02-26T13:14:09Z (GMT). No. of bitstreams: 1 espinozacruz_ma_me_ilha.pdf: 5516624 bytes, checksum: a926e8b18f63107cea2ad7
APA, Harvard, Vancouver, ISO, and other styles
33

Hrubý, Radek. "Analýza vyvedení elektrického výkonu v městské zástavbě." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2012. http://www.nusl.cz/ntk/nusl-219418.

Full text
Abstract:
The work focuses on outlet of the electrical power from power plants operating in urban areas. After a short analysis of the general possibility of leading out electric power from power plants of various types, thesis continues to describe of outlet electrical power from PPC Červený Mlýn. Subsequently, are calculated short-circuit conditions in the main switching station. It follows an analysis of power lines. The last part dealt with the issue of reliability of sources in connection with random transition processes in the electrical network and the light of the operational reliability of elec
APA, Harvard, Vancouver, ISO, and other styles
34

Mingardi, Damiano. "Analysis, design and test of high efficiency electrical machines with a rotor winding." Doctoral thesis, Università degli studi di Padova, 2017. http://hdl.handle.net/11577/3422394.

Full text
Abstract:
This thesis deals with the analysis, design and test of three-phase high efficiency electrical motors, with particular reference to motors with a rotor winding. At first, the background and the motivations of this work are described. The bibliography on the subjects is deeply examined and a selection of the most relevant papers can be found in the reference. In this scenario, the main objective of this thesis are illustrated. The Line-Start (LS) Synchronous Machine (SyM) design is a subject under investigation since the beginning of the last century, when solid state power converters was not
APA, Harvard, Vancouver, ISO, and other styles
35

Nguyen, Thanh Don. "Impact de la résolution et de la précision de la topographie sur la modélisation de la dynamique d’invasion d’une crue en plaine inondable." Thesis, Toulouse, INPT, 2012. http://www.theses.fr/2012INPT0093/document.

Full text
Abstract:
Nous analysons dans cette thèse différents aspects associés à la modélisation des écoulements à surface libre en eaux peu profondes (Shallow Water). Nous étudions tout d’abord le système d’équations de Saint-Venant à deux dimensions et leur résolution par la méthode numérique des volumes finis, en portant une attention particulière sur les aspects hyperboliques et conservatifs. Ces schémas permettent de traiter les équilibres stationnaires, les interfaces sec/mouillé et aussi de modéliser des écoulements subcritique, transcritique et supercritique. Nous présentons ensuite la théorie de la méth
APA, Harvard, Vancouver, ISO, and other styles
36

Chang, Y. H., and 張堯翔. "Model Reduction of Porous Media Heat Transfer with Uncertain Boundary Conditions and Distributed Parameters." Thesis, 2002. http://ndltd.ncl.edu.tw/handle/54832940283137367917.

Full text
Abstract:
碩士<br>國立中正大學<br>機械系<br>90<br>This thesis provides a methodology of model reduction of the heat transfer of porous media with uncertain boundary conditions and distributed parameters. It focuses on the identification of uncertain parameters, boundary conditions as well as the process of dynamical database and simplification of dynamical model, which build an important bridge from the complexity of porous media heat transfer to the availability of online operation. The kernel methodology is to formulate the governing equation and boundary conditions into a single state-space description. A set o
APA, Harvard, Vancouver, ISO, and other styles
37

Pihnastyi, O. M., and V. D. Khodusov. "Neural model of conveyor type transport system." Thesis, 2020. http://repository.kpi.kharkov.ua/handle/KhPI-Press/47233.

Full text
Abstract:
In this paper, a model of a transport conveyor system using a neural network is demonstrated. The analysis of the main parameters of modern conveyor systems is presented. The main models of the conveyor section, which are used for the design of control systems for flow parameters, are considered. The necessity of using neural networks in the design of conveyor transport control systems is substantiated. A review of conveyor models using a neural network is performed. The conditions of applicability of models using neural networks to describe conveyor systems are determined. A comparative analy
APA, Harvard, Vancouver, ISO, and other styles
38

Huang, San-Yuan. "Markov Model Parameters Optimization for Asynchronous Impulsive Noise over Power Line Communication Network and Implementation of Noise Generator." 2006. http://www.cetd.com.tw/ec/thesisdetail.aspx?etdun=U0006-2108200612033500.

Full text
APA, Harvard, Vancouver, ISO, and other styles
39

Huang, San-Yuan, and 黃三垣. "Markov Model Parameters Optimization for Asynchronous Impulsive Noise over Power Line Communication Network and Implementation of Noise Generator." Thesis, 2006. http://ndltd.ncl.edu.tw/handle/54k4k8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
40

Costa, Sérgio Jorge Pereira da. "Multi-agent model predictive control for transport phenomena processes." Doctoral thesis, 2016. http://hdl.handle.net/10362/18337.

Full text
Abstract:
Throughout the last decades, control systems theory has thrived, promoting new areas of development, especially for chemical and biological process engineering. Production processes are becoming more and more complex and researchers, academics and industry professionals dedicate more time in order to keep up-to-date with the increasing complexity and nonlinearity. Developing control architectures and incorporating novel control techniques as a way to overcome optimization problems is the main focus for all people involved. Nonlinear Model Predictive Control (NMPC) has been one of the main r
APA, Harvard, Vancouver, ISO, and other styles
41

Пигнастый, Олег Михайлович. "О критериях подобия производственных поточных линий". Thesis, 2017. http://repository.kpi.kharkov.ua/handle/KhPI-Press/48496.

Full text
Abstract:
Постановка экспериментов позволяет установить общие закономерности для поведения параметров поточных линий разных производственных систем. Для практических исследований важно выбрать минимальное число безразмерных параметров, отражающих в наиболее удобной форме основные эффекты исследуемых технологических процессов. Постановка и обработка экспериментальных данных требует учета вопросов подобия и размерности. В начальной стадии изучения некоторых сложных явлений производственных процессов теория подобия является единственно возможным теоретическим методом, может привести к довольно существенны
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!