Log in

Relevant bibliographies by topics / Distributed recycling / Journal articles

To see the other types of publications on this topic, follow the link: Distributed recycling.

Journal articles on the topic 'Distributed recycling'

Author: Grafiati

Published: 8 June 2024

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Distributed recycling.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Kreiger, M., G. C. Anzalone, M. L. Mulder, A. Glover, and J. M. Pearce. "Distributed Recycling of Post-Consumer Plastic Waste in Rural Areas." MRS Proceedings 1492 (2013): 91–96. http://dx.doi.org/10.1557/opl.2013.258.

Full text

Abstract:

ABSTRACTAlthough the environmental benefits of recycling plastics are well established and most geographic locations within the U.S. offer some plastic recycling, recycling rates are often low. Low recycling rates are often observed in conventional centralized recycling plants due to the challenge of collection and transportation for high-volume low-weight polymers. The recycling rates decline further when low population density, rural and relatively isolated communities are investigated because of the distance to recycling centers makes recycling difficult and both economically and energetica

APA, Harvard, Vancouver, ISO, and other styles

2

Xiao, Y., and M. A. Reuter. "Recycling of distributed aluminium turning scrap." Minerals Engineering 15, no. 11 (2002): 963–70. http://dx.doi.org/10.1016/s0892-6875(02)00137-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Ng‐Molina, Francisco Y., Teresa M. Martín‐Guerrero, and Carlos Camacho‐Peñalosa. "Power recycling concept applied to distributed amplification." IET Microwaves, Antennas & Propagation 7, no. 15 (2013): 1207–14. http://dx.doi.org/10.1049/iet-map.2013.0160.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Kassab, Ali, Dawood Al Nabhani, Pravansu Mohanty, Christopher Pannier, and Georges Y. Ayoub. "Advancing Plastic Recycling: Challenges and Opportunities in the Integration of 3D Printing and Distributed Recycling for a Circular Economy." Polymers 15, no. 19 (2023): 3881. http://dx.doi.org/10.3390/polym15193881.

Full text

Abstract:

The concept of the circular economy has emerged as a promising solution to address the mounting concerns surrounding plastic waste and the urgent need for sustainable resource management. While conventional centralized recycling remains a common practice for plastic waste, centralized facilities may prove inadequate in handling the ever-increasing volumes of plastic waste generated globally. Consequently, exploring alternative recycling methods, such as distributed recycling by additive manufacturing, becomes paramount. This innovative approach encompasses actively involving communities in rec

APA, Harvard, Vancouver, ISO, and other styles

5

Baechler, Christian, Matthew DeVuono, and Joshua M. Pearce. "Distributed recycling of waste polymer into RepRap feedstock." Rapid Prototyping Journal 19, no. 2 (2013): 118–25. http://dx.doi.org/10.1108/13552541311302978.

Full text

Abstract:

PurposeA low‐cost, open source, self‐replicating rapid prototyper (RepRap) has been developed, which greatly expands the potential user base of rapid prototypers. The operating cost of the RepRap can be further reduced using waste polymers as feedstock. Centralized recycling of polymers is often uneconomic and energy intensive due to transportation embodied energy. The purpose of this paper is to provide a proof of concept for high‐value recycling of waste polymers at distributed creation sites.Design/methodology/approachPrevious designs of waste plastic extruders (also known as RecycleBots) w

APA, Harvard, Vancouver, ISO, and other styles

6

Ziouzios, Dimitris, Dimitris Tsiktsiris, Nikolaos Baras, and Minas Dasygenis. "A Distributed Architecture for Smart Recycling Using Machine Learning." Future Internet 12, no. 9 (2020): 141. http://dx.doi.org/10.3390/fi12090141.

Full text

Abstract:

Recycling is vital for a sustainable and clean environment. Developed and developing countries are both facing the problem of solid management waste and recycling issues. Waste classification is a good solution to separate the waste from the recycle materials. In this work, we propose a cloud based classification algorithm for automated machines in recycling factories using machine learning. We trained an efficient MobileNet model, able to classify five different types of waste. The inference can be performed in real-time on a cloud server. Various techniques are described and used in order to

APA, Harvard, Vancouver, ISO, and other styles

7

Liang, Wanlin, and Xiaofan He. "Enhancing Rate-Splitting-Based Distributed Edge Computing via Multi-Group Information Recycling." Electronics 13, no. 22 (2024): 4403. http://dx.doi.org/10.3390/electronics13224403.

Full text

Abstract:

To address the straggling effect in distributed edge computing, existing methods often introduce extra computation or communication costs. Recently, information recycling has emerged as an efficient solution that avoids such extra overhead. Nonetheless, the performance of the existing information recycling-assisted rate-splitting-based distributed edge computing scheme significantly hinges on the single common stream, whose rate is limited by the edge node (EN) with the worst channel quality. To this end, a multi-group information recycling scheme for rate-splitting-based distributed edge comp

APA, Harvard, Vancouver, ISO, and other styles

8

Huang, You Heng, and Qi Hong Wei. "Distribution Mode of Urban Renewable Resources Recycling Based on the Internet." Advanced Materials Research 616-618 (December 2012): 1636–39. http://dx.doi.org/10.4028/www.scientific.net/amr.616-618.1636.

Full text

Abstract:

The widely use of the Internet has greatly expanded the materials supply channels of the renewable resources. Online recycling has become an important way of the renewable resources in China. . The distribution mode of urban renewable resources recycling based on the Internet and also its associated conditions was put forward after comparing the distributed transaction mode of the renewable resources between the traditional recycling and online recycling.

APA, Harvard, Vancouver, ISO, and other styles

9

Dertinger, Samantha C., Nicole Gallup, Nagendra G. Tanikella, et al. "Technical pathways for distributed recycling of polymer composites for distributed manufacturing: Windshield wiper blades." Resources, Conservation and Recycling 157 (June 2020): 104810. http://dx.doi.org/10.1016/j.resconrec.2020.104810.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Hopkins, C. R., A. Gibson, M. Shipman, D. K. Strickland, and I. S. Trowbridge. "In migrating fibroblasts, recycling receptors are concentrated in narrow tubules in the pericentriolar area, and then routed to the plasma membrane of the leading lamella." Journal of Cell Biology 125, no. 6 (1994): 1265–74. http://dx.doi.org/10.1083/jcb.125.6.1265.

Full text

Abstract:

By following the intracellular processing of recycling transferrin receptors and the selective sorting of a-2 macroglobulin in chick embryo fibroblasts, we have shown that the concentration of 60 nm diam tubules which surrounds the centrioles represents a distal compartment on the recycling pathway. In migrating cells transferrin receptor tracers can be loaded into this compartment and then chased to the cell surface. When they emerge the recycling transferrin receptors are distributed over the surface of the leading lamella.

APA, Harvard, Vancouver, ISO, and other styles

11

Little, Helen A., Nagendra G. Tanikella, Matthew J. Reich, Matthew J. Fiedler, Samantha L. Snabes, and Joshua M. Pearce. "Towards Distributed Recycling with Additive Manufacturing of PET Flake Feedstocks." Materials 13, no. 19 (2020): 4273. http://dx.doi.org/10.3390/ma13194273.

Full text

Abstract:

This study explores the potential to reach a circular economy for post-consumer Recycled Polyethylene Terephthalate (rPET) packaging and bottles by using it as a Distributed Recycling for Additive Manufacturing (DRAM) feedstock. Specifically, for the first time, rPET water bottle flake is processed using only an open source toolchain with Fused Particle Fabrication (FPF) or Fused Granular Fabrication (FGF) processing rather than first converting it to filament. In this study, first the impact of granulation, sifting, and heating (and their sequential combination) is quantified on the shape and

APA, Harvard, Vancouver, ISO, and other styles

12

Sadowski, Przemysław. "Quantum distance-based classifier with distributed knowledge and state recycling." International Journal of Quantum Information 16, no. 08 (2018): 1840013. http://dx.doi.org/10.1142/s0219749918400130.

Full text

Abstract:

In this work, we examine a recently proposed distance-based classification method designed for near-term quantum processing units with limited resources. We study possibilities to reduce the quantum resources without any efficiency decrease. We show that only a part of the information undergoes coherent evolution and this fact allows us to introduce an algorithm with significantly reduced quantum system size requirements. Additionally, considering only partial information at a time, we propose a classification protocol with information distributed among a number of agents. Finally, we show tha

APA, Harvard, Vancouver, ISO, and other styles

13

Hunt, Emily J., Chenlong Zhang, Nick Anzalone, and Joshua M. Pearce. "Polymer recycling codes for distributed manufacturing with 3-D printers." Resources, Conservation and Recycling 97 (April 2015): 24–30. http://dx.doi.org/10.1016/j.resconrec.2015.02.004.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Zhou, Ling Yun, and Qing Zhang. "Research on the Recycling Logistics Network Design of Renewable Resources in China." Advanced Materials Research 573-574 (October 2012): 992–95. http://dx.doi.org/10.4028/www.scientific.net/amr.573-574.992.

Full text

Abstract:

The construction of efficient renewable resource recycling network is the premise of utilizing the enormous renewable resources in city and rural areas. According to the characteristics of renewable resources and the actual recycling conditions in China, the main influence factors of renewable resource recycling logistics network were analyzed Moreover, the guiding principles and general ideas of the construction of renewable resource recycle logistics network were analyzed, and its framework and operation measures were elaborately designed for government management departments and renewable r

APA, Harvard, Vancouver, ISO, and other styles

15

Ravindran, Arvind, Sean Scsavnicki, Walker Nelson, et al. "Open Source Waste Plastic Granulator." Technologies 7, no. 4 (2019): 74. http://dx.doi.org/10.3390/technologies7040074.

Full text

Abstract:

In order to accelerate deployment of distributed recycling by providing low-cost feed stocks of granulated post-consumer waste plastic, this study analyzes an open source waste plastic granulator system. It is designed, built, and tested for its ability to convert post-consumer waste, 3D printed products and waste into polymer feedstock for recyclebots of fused particle/granule printers. The technical specifications of the device are quantified in terms of power consumption (380 to 404 W for PET and PLA, respectively) and particle size distribution. The open source device can be fabricated for

APA, Harvard, Vancouver, ISO, and other styles

16

Gabriel, Alex, and Sanchez Fabio A. Cruz. "Open source IoT-based collection bin applied to local plastic recycling." HardwareX 13 (March 1, 2023): e00389. https://doi.org/10.1016/j.ohx.2022.e00389.

Full text

Abstract:

Plastic waste is a major challenge for policy making; it has a terrible impact on the environment if it is not properly managed. In order to mitigate this issue, recycling industries have emerged with the associated logistics chain that also has an environmental impact, notably with the production of greenhouse gas. In addition to using energy to transform plastic waste into source material, energy is also wasted to transport it. In parallel to reducing plastic waste, it may be recycled at a very local scale, reducing transportation and allowing potential improvement of the collecting process.

APA, Harvard, Vancouver, ISO, and other styles

17

Jyoti, Md Chand Rashid, and Monalisha Dash. "Waste Management and Recycle Practices in the Hotel Industry." PUSA Journal of Hospitality and Applied Sciences 10, no. 2 (2024): 60–66. https://doi.org/10.48165/pjhas.2024.10.2.8.

Full text

Abstract:

Background: In the current era of eco-friendly and environmental strategies, waste practices like recycling offer potential benefits for the hotel industry. However, research supporting the financial advantages of these practices is still lacking. Objective: This study aims to explore the waste management which is being produced by the hotel sector and recycle practices which are adopted by the hotel. The study also evaluates the potential environmental benefits of recycling, particularly in relation to reducing greenhouse gas (GHG) emissions. Methodology: Primary data was collected via a ques

APA, Harvard, Vancouver, ISO, and other styles

18

Kikot, Maksym, and Julia Malieieva. "Models of forming logistics infrastructure for complex equipment recycling." INNOVATIVE TECHNOLOGIES AND SCIENTIFIC SOLUTIONS FOR INDUSTRIES, no. 3 (29) (September 30, 2024): 15–28. http://dx.doi.org/10.30837/2522-9818.2024.3.015.

Full text

Abstract:

Subject matter: models for forming the logistics infrastructure for complex equipment recycling. The work aims to create optimization models that consider key factors in forming recycling infrastructure and combine centralized and decentralized elements to enhance the efficiency of this process. Tasks: analyze modern approaches to organizing complex equipment recycling; identify criteria and factors for optimizing recycling infrastructure; develop a multi-level recycling infrastructure; formulate optimization models for recycling infrastructure, taking into account enterprise production capaci

APA, Harvard, Vancouver, ISO, and other styles

19

Abdul Malek, Nur Damia. "A Study of Consumer Recycling Behaviour Towards Beauty and Cosmetics Products." Platform : A Journal of Management and Humanities 7, no. 1 (2024): 14. http://dx.doi.org/10.61762/pjmhvol7iss1art27057.

Full text

Abstract:

This research aims to study factors influencing consumer recycling behaviour (RB) to participate in the beauty and cosmetics industry Recycling Programs where Planned Behaviour (TPB) and Attitude-Behaviour-Condition (A-B-C) Theory were combined. The variables tested in this study are Environmental Attitudes (EA), Social Norms (SN), Environmental Knowledge, Publicity and Education (EP), Environmental Facilities and Services (EF), and Social Media Usage (SM). Through a Google Form, 304 questionnaire samples are collected and distributed to consumers 18-70 years old in Kuala Lumpur using social m

APA, Harvard, Vancouver, ISO, and other styles

20

Lafourcade, Céline, Jean-Marc Galan, and Matthias Peter. "Opposite Roles of the F-Box Protein Rcy1p and the GTPase-Activating Protein Gyp2p During Recycling of Internalized Proteins in Yeast." Genetics 164, no. 2 (2003): 469–77. http://dx.doi.org/10.1093/genetics/164.2.469.

Full text

Abstract:

Abstract The F-box protein Rcy1p is part of a non-SCF (Skp1p-cullin-F-box protein) complex involved in recycling of internalized material. Like rcy1Δ, cells lacking the Rab-GTPase Ypt6p or its heterodimeric GEFs Rgp1p and Ric1p are unable to recycle the v-SNARE Snc1p. Here we provide genetic evidence suggesting that Rcy1p is a positive regulator of Ypt6p. Deletion of the GAP Gyp2p restores recycling in rcy1Δ, while overexpression of an active form of Ypt6p partially suppresses the recycling defect of rcy1Δ cells. Conversely, overexpression of Gyp2p in wild-type cells interferes with recycling

APA, Harvard, Vancouver, ISO, and other styles

21

Roido, Mitoula, Sardianou Eleni, Theodoropoulou Eleni, and Passas Xenophontas. "Consumer's behaviour in terms of paper's recycling. Case Study: The Municipality of Aigaleo in Greece." Greener Journal of Ecology and Ecosolution 2, no. 1 (2015): 1–11. https://doi.org/10.15580/GJEE.2015.1.281114397.

Full text

Abstract:

In the present essay the objective is to investigate consumer's attitude towards the recycling of printed paper. As a case of study the Municipality of Aigaleo in Greece was chosen. For the purposes of this research both bibliographic, as well as primary empirical research was conducted. The primary research was based on the use cross layer data, which came from a questionnaire that was distributed to 355 residents of the municipality of Aigaleo. The research revealed that certain factors do influence the behavior of the citizens of the municipality of Aigaleo regarding recycling. Mor

APA, Harvard, Vancouver, ISO, and other styles

22

Tang, Jialu, Natrina M. P. Toyong, and Norazmi Shahlal. "Service Requirement Analysis of Community Scrap Recycling Platform Based on Kano Model." Malaysian Journal of Social Sciences and Humanities (MJSSH) 9, no. 5 (2024): e002828. http://dx.doi.org/10.47405/mjssh.v9i5.2828.

Full text

Abstract:

This study examines community scrap recycling platforms as an important tool for promoting sustainable development. Focusing on the i-City community in Malaysia, the investigation used user journey mapping, desktop research, questionnaires, and affinity diagrams to collect and then categorize residents' needs, designed and distributed Kano questionnaires, analysed and counted the attribute categories of each need, and calculated the sensitivity of each need through a Better-worse four quadrant scatter diagram. A detailed requirements analysis report was ultimately developed to provide insights

APA, Harvard, Vancouver, ISO, and other styles

23

Hara, Yuji, Takashi Furutani, Akinobu Murakami, Armando M. Palijon, and Makoto Yokohari. "Current organic waste recycling and the potential for local recycling through urban agriculture in Metro Manila." Waste Management & Research: The Journal for a Sustainable Circular Economy 29, no. 11 (2010): 1213–21. http://dx.doi.org/10.1177/0734242x10386638.

Full text

Abstract:

Using the solid waste management programmes of three barangays (the smallest unit of local government in the Philippines) in Quezon City, Metro Manila, as a case study, this research aimed to further the development of efficient organic waste recycling systems through the promotion of urban agricultural activities on green and vacant spaces. First, the quantity of organic waste and compost produced through ongoing barangay projects was measured. The amount of compost that could potentially be utilized on farmland and vacant land within the barangays was then identified to determine the possibi

APA, Harvard, Vancouver, ISO, and other styles

24

Narayanan, Sandeep, Mohammad Shikh-Bahaei, Jiancao Hou, and Mark F. Flanagan. "Wireless-Powered Distributed Spatial Modulation With Energy Recycling and Finite-Energy Storage." IEEE Transactions on Wireless Communications 17, no. 10 (2018): 6645–62. http://dx.doi.org/10.1109/twc.2018.2861870.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

Dasgupta, Probal. "Linguistic recycling and the open community." Language Problems and Language Planning 25, no. 3 (2001): 289–301. http://dx.doi.org/10.1075/lplp.25.3.06das.

Full text

Abstract:

When an international community uses a WDL (widely distributed language) such as English or French, words in this WDL globally perform a recycling function that bridges the gaps between the spatially restricted versions of such a WDL. At one level of access, we can study this recycling particularly clearly in a language such as Esperanto, whose speech community has a strong global norm and much weaker local norms, unlike English or French. The present note empirically examines the issue in the strategically convenient context of domestic Esperanto use, working from a recent compilation by Lind

APA, Harvard, Vancouver, ISO, and other styles

26

Vidakis, Nectarios, Markos Petousis, Lazaros Tzounis, et al. "Sustainable Additive Manufacturing: Mechanical Response of Polyethylene Terephthalate Glycol over Multiple Recycling Processes." Materials 14, no. 5 (2021): 1162. http://dx.doi.org/10.3390/ma14051162.

Full text

Abstract:

The continuous demand for thermoplastic polymers in a great variety of applications, combined with an urgent need to minimize the quantity of waste for a balanced energy-from-waste strategy, has led to increasing scientific interest in developing new recycling processes for plastic products. Glycol-modified polyethylene terephthalate (PETG) is known to have some enhanced properties as compared to polyethylene terephthalate (PET) homopolymer; this has recently attracted the interest from the fused filament fabrication (FFF) three-dimensional (3D) printing community. PET has shown a reduced abil

APA, Harvard, Vancouver, ISO, and other styles

27

Estelita, Sérgio, Guilherme Janson, Kelly Chiqueto, and Eduardo Silveira Ferreira. "Effect of Recycling Protocol on Mechanical Strength of Used Mini-Implants." International Journal of Dentistry 2014 (2014): 1–5. http://dx.doi.org/10.1155/2014/424923.

Full text

Abstract:

Purpose. This study evaluated the influence of recycling process on the torsional strength of mini-implants.Materials and Methods. Two hundred mini-implants were divided into 4 groups with 50 screws equally distributed in five diameters (1.3 to 1.7 mm): control group (CG): unused mini-implants, G1: mini-implants inserted in pig iliac bone and removed, G2: same protocol of group 1 followed by sonication for cleaning and autoclave sterilization, and G3: same insertion protocol of group 1 followed by sonication for cleaning before and after sandblasting (Al2O3-90 µ) and autoclave sterilization. G

APA, Harvard, Vancouver, ISO, and other styles

28

Raja Zulkifli, Raja Nur Izny Kamaliyah, Husnul ‘Izzati Hassan, and Farah Adilla Ab Rahman. "EXPLORING OBSTACLES TO RECYCLING PRACTICES AMONG UNIVERSITY STUDENTS: A CASE STUDY OF STUDENTS AT UiTM SEREMBAN." Journal of Tourism, Hospitality and Environment Management 9, no. 36 (2024): 48–59. http://dx.doi.org/10.35631/jthem.936004.

Full text

Abstract:

This research aims to attain a comprehensive understanding of the barriers influencing recycling behaviour among university students, with a specific focus on the student community at Universiti Teknologi MARA (UiTM) Seremban. Concentrating on four key factors—Awareness of UiTM Seremban Students, Convenience of Recycling Facilities at UiTM Seremban, Social Norms at UiTM Seremban, and Perceptions of UiTM Seremban Students—the study aims to delve into the intricate dynamics that hinder recycling behaviour within this academic setting. To collect data, a questionnaire survey was employed as the r

APA, Harvard, Vancouver, ISO, and other styles

29

Moqbel, Shadi, Rund Abu-Zurayk, Ayat Bozeya, Raed Alsisan, and Abeer Al Bawab. "Assessment of sustainable recycling at The University of Jordan." International Journal of Sustainability in Higher Education 21, no. 6 (2020): 1111–29. http://dx.doi.org/10.1108/ijshe-11-2019-0334.

Full text

Abstract:

Purpose This study sought to assess the process of initiating a sustainable recycling program at the University of Jordan. It illustrates the potentials of recycling, perceived awareness of recycling by the students and staff, as well as challenges to a sustainable waste recycling program. This study aims to identify the barriers and challenges that face a sustainable waste recycling program at the University of Jordan. Design/methodology/approach The study consisted of investigating waste recycling potential on campus, inspecting general environmental awareness toward recycling and running an

APA, Harvard, Vancouver, ISO, and other styles

30

Alimbekova, N., Sh Hashim, A. Zhumadillayeva, and S. Aiymbay. "DEEP NEURAL NETWORKS AS A TOOL FOR ENHANCING THE EFFICIENCY OF PLASTIC WASTE SORTING." Herald of the Kazakh-British technical university 21, no. 3 (2024): 116–27. http://dx.doi.org/10.55452/1998-6688-2024-21-3-116-127.

Full text

Abstract:

In the recycling industry, there is an urgent need for high-quality sorted material. The problems of sorting centers related to the difficulties of sorting and cleaning plastic leads to the accumulation of waste in landfills instead of recycling, emphasizing the need to develop effective automated sorting methods. This study proposes an intelligent plastic classification model developed on the basis of a convolutional neural network (CNN) using architectures such as MobileNet, ResNet and EfficientNet. The models were trained on a dataset of more than 4,000 images distributed across five catego

APA, Harvard, Vancouver, ISO, and other styles

31

Passas, Xenophontas, Roido Mitoula, Eleni Theodoropoulou, and Eleni Sardianou. "The Green Management of Paper of the Third Age in the Region of Attica. Case Study: The Municipalities of Egaleo and Chaidari." World Journal of Social Science Research 6, no. 3 (2019): p335. http://dx.doi.org/10.22158/wjssr.v6n3p335.

Full text

Abstract:

The purpose of this thesis is to examine the determinant factors of recycling and in particular of paper recycling. The research focuses on paper recycling behavior on the part of the elderly in the Region of Attica. Primary research was based on the use of layered data. The survey data was collected through the distribution of questionnaires to senior citizens in the municipalities of Egaleo and Chaidari. The questionnaire was distributed by hand in the region’s O.C.C. (Open Care Centers) for the Elderly Staff Members during the period from November 2017 until February 2018 (11/2017-02/2018).

APA, Harvard, Vancouver, ISO, and other styles

32

Yang, Lijun, and Yi Wang. "Electric Vehicle Traction Battery Recycling Decision-Making Considering Blockchain Technology in the Context of Capacitance Level Differential Demand." World Electric Vehicle Journal 15, no. 12 (2024): 561. https://doi.org/10.3390/wevj15120561.

Full text

Abstract:

In recent years, the rapid growth in electric vehicle ownership has resulted in a significant number of decommissioned traction batteries that will require recycling in the future. As consumer expectations for electric vehicle range continue to rise, the turnover of traction batteries has accelerated substantially. Consequently, there is an urgent need for electric vehicle manufacturers to establish an efficient, recyclable supply chain for the return of end-of-life (EOL) electric vehicle (EV) traction batteries. In this paper, we investigate the closed-loop recycling supply chain for retired

APA, Harvard, Vancouver, ISO, and other styles

33

Zhang, Xinyu. "Optimizing the location choice of reverse logistics recycling network for end-of-life photovoltaic modules based on the EPR principle." International Journal of Global Economics and Management 2, no. 3 (2024): 50–63. http://dx.doi.org/10.62051/ijgem.v2n3.06.

Full text

Abstract:

With the rapid development of the photovoltaic (PV) industry, the collection and recycling of end-of-life PV modules is facing a new challenge. Based on the EPR principle (Extended Producer Responsibility principle), this paper investigates the location choice of reverse logistics recycling network for end-of-life PV modules from the perspective of different stakeholders. In this study, a mixed integer programming (MILP) model is established to optimize the reverse logistics network of end-of-life PV modules with the objective of minimizing the total cost of the reverse logistics network, taki

APA, Harvard, Vancouver, ISO, and other styles

34

Abdul Halim, Husna, Mohamed Zuhaili Mohamed Najib, Muzaffar Zainal Abideen, Hazlami Fikri Basri, and Khalida Muda. "Study of Household Waste Management and Recycling Awareness Between Residential Areas in Kuala Nerang, Kedah, Malaysia." Industrial and Domestic Waste Management 2, no. 1 (2022): 39–45. http://dx.doi.org/10.53623/idwm.v2i1.70.

Full text

Abstract:

This paper presents a study on household waste management and recycling awareness. Residential areas are the major sources of solid waste as that is where people live. The waste that is usually disposed of from residential areas includes food waste, plastic waste, paper, glass, tin, and others. The increasing trend in waste generated from homes has become a major concern. This study aimed to assess household waste management and recycling awareness in two residential areas located in Padang Terap District, Kuala Nerang, Kedah, Malaysia. Recently, Padang Terap district showed an increase in was

APA, Harvard, Vancouver, ISO, and other styles

35

Saginova, Olga, Dmitry Zavyalov, Natalia Kireeva, Nadezhda Zavyalova, and Yury Saginov. "Food-sharing in the distributed use economy." E3S Web of Conferences 247 (2021): 01016. http://dx.doi.org/10.1051/e3sconf/202124701016.

Full text

Abstract:

Sustainable development values and concepts of responsible consumption, sharing, waste-free production and recycling are becoming more and more popular among organisations and consumers. Though food-sharing has not yet become as popular as car-sharing, it aims to solve important social food policy problems of decreasing food waste and redistributing food to support those in need. Basing on research literature, and publications in business media the paper presents the results of content analysis of materials from food-sharing platforms and websites in Russia. Authors compare foreign best practi

APA, Harvard, Vancouver, ISO, and other styles

36

Georgescu, Irina, Ionuț Nica, Camelia Delcea, Cristian Ciurea, and Nora Chiriță. "A Cybernetics Approach and Autoregressive Distributed Lag Econometric Exploration of Romania’s Circular Economy." Sustainability 16, no. 18 (2024): 8248. http://dx.doi.org/10.3390/su16188248.

Full text

Abstract:

The purpose of this study, which adopts a cybernetics systems approach, is to analyze the circular economy landscape in Romania. It investigates the role of circular economy practices in the country’s endeavors to combat climate change and minimize its environmental footprint. Using data spanning from 2000 to 2022, we applied the autoregressive distributed lag (ARDL) model to examine the interdependence between CO2 emissions and key factors, such as GDP per capita, the recycling rate of municipal waste, and the generation of municipal waste per capita. Our findings suggest that the implementat

APA, Harvard, Vancouver, ISO, and other styles

37

Wu, Chia-Jung, Guan-Jhong Wang, Chyuan Hauer Kao, et al. "Photon-Recycling in Ultraviolet GaN-Based Photodiodes with Porous AlGaN Distributed Bragg Reflectors." ACS Applied Nano Materials 2, no. 8 (2019): 5044–48. http://dx.doi.org/10.1021/acsanm.9b00973.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Jameer, Vaughn-Xavier, Ambika Mallian, and Trina Halfhide. "Examining Solid Waste Practices and Littering at the University of the West Indies, St. Augustine Campus." Journal of Caribbean Environmental Sciences and Renewable Energy 3, no. 1 (2020): 17–22. http://dx.doi.org/10.33277/cesare/003.001/02.

Full text

Abstract:

Littering is a rampant problem and rooted in human behaviour. This study aims to record, categorise, and examine spatial patterns between pieces of litter and trash and recycling bins across the University of the West Indies, St. Augustine Campus. The geographic location of pieces of litter and bins (trash and recycling) were recorded and georeferenced to a campus base-map. A total of 10, 889 pieces of litter were recorded over the 7-day survey. The majority of litter was plastic (47.6%) and cigarettes (24.1%). The litter on campus was not evenly distributed. The kernel density estimation demo

APA, Harvard, Vancouver, ISO, and other styles

39

Saari, Riduan, Siti Rohana Mohd Yatim, Ahmad Razali ishak, et al. "Knowledge, Attitude, And Challenges of High-Rise Building Community Towards Waste Segregation and Recycling Practice in Metropolitan Kuala Lumpur, Malaysia." IOP Conference Series: Earth and Environmental Science 1217, no. 1 (2023): 012023. http://dx.doi.org/10.1088/1755-1315/1217/1/012023.

Full text

Abstract:

Abstract The increasing population of modern cities contributes to the development of more residential high-rise buildings as well as waste management challenges. Recycling and waste separation can be a challenge in high rise apartment buildings due to the high volume of residents and limited space for waste management. Therefore, the objectives of this study is to investigate the knowledge, attitude, and challenges of high-rise building communities towards waste segregation and recycling. Using cross-sectional analysis, online questionnaires were distributed to target respondents in Sentul Ku

APA, Harvard, Vancouver, ISO, and other styles

40

Badraddin, Abdulmalek K., Rahimi A. Rahman, Saud Almutairi, and Muneera Esa. "Main Challenges to Concrete Recycling in Practice." Sustainability 13, no. 19 (2021): 11077. http://dx.doi.org/10.3390/su131911077.

Full text

Abstract:

While concrete recycling is crucial to protecting the environment, its implementation in practice is low in many countries. This study aims to highlight challenges to concrete recycling. To achieve that aim, the study objectives are (1) to identify the main challenges to concrete recycling in construction projects; (2) to compare the main challenges between small–medium enterprises (SMEs) and large enterprises (LEs); and (3) to determine the underlying groups among the main challenges. Potential challenges were identified through a systematic literature review of journal articles and semi-stru

APA, Harvard, Vancouver, ISO, and other styles

41

Mohammad Mohsin, Tasnim, Noor Ezlin Ahmad Basri, Shahrom Md. Zain, and Tiew Kian Ghee. "Effectiveness of Masjid Lestari Program on Recycling Practices among Bandar Baru Bangi and Semenyih Residents." Jurnal Kejuruteraan si1, no. 5 (2018): 77–82. http://dx.doi.org/10.17576/jkukm-2018-si1(5)-11.

Full text

Abstract:

The government of Malaysia has implemented various measures to reduce disposal of daily solid waste to landfills including recycling. Based on the issue, the Universiti Kebangsaan Malaysia took the initiative to organise “Program Masjid Lestari” targeting to enhance recycling practices among the community. The objectives of this study are to identify factors that influence the behaviour of recycling practices in the community and to assess the effectiveness of the awareness programme, “Program Masjid Lestari”. “Program Masjid Lestari” focused on recycling practices among Bandar Baru Bangi and

APA, Harvard, Vancouver, ISO, and other styles

42

Erdiaw-Kwasie, Michael Odei, Kofi Kusi Owusu-Ansah, Matthew Abunyewah, et al. "Circular economy, environmental quality and tourism receipts in Europe: A time series data analysis." PLOS ONE 18, no. 11 (2023): e0288098. http://dx.doi.org/10.1371/journal.pone.0288098.

Full text

Abstract:

The study examines how progress towards a circular economy (CE), patents related to recycling and secondary raw materials as a proxy for innovation, affect tourism receipts. The study uses Autoregressive Distributed Lag (ARDL) and Error Correction Method (ECM) to analyse time series data from EU countries from 2000 to 2020. Our estimates show that there exist long-run and short-run equilibrium relationships. In sum, evidence shows that promoting circular innovative practices, including recycling and using secondary raw materials in tourist destinations, could improve environmental quality and

APA, Harvard, Vancouver, ISO, and other styles

43

Madhwapathi, Vidya, and Charlotte Woodley. "Sustainability of Pharmaceutical and Cosmeceutical Products within Dermatology." Journal of Sustainable Dermatology in Practice 1, no. 1 (2024): 41–48. http://dx.doi.org/10.5750/jsdp.v1i1.2194.

Full text

Abstract:

The extent of packaging materials used in topical dermatological products and the sustainability of these are not well known. It is a known fact, however, that individual dermatology departments prescribe or recommend these dermatological products to patients. This study aims to evaluate current practice in terms of how many dermatological products distributed to patients are recyclable, by assessing whether the topical treatments available within a dermatology department display a Mobius loop or equivalent – thus indicating that a product and its packaging may be recycled. Our results show th

APA, Harvard, Vancouver, ISO, and other styles

44

Atitebi, Oluwatosin S., Kalpana Dumre, and Erick C. Jones. "Supporting a Lithium Circular Economy via Reverse Logistics: Improving the Preprocessing Stage of the Lithium-Ion Battery Recycling Supply Chain." Energies 18, no. 3 (2025): 651. https://doi.org/10.3390/en18030651.

Full text

Abstract:

The clean energy transition is a paradigm shift from a carbon-intensive energy system to a renewable energy one. The new energy system requires large amounts of critical minerals, including lithium. However, the mining and extraction of these minerals introduces environmental challenges. Recycling critical minerals, a critical step for a circular economy, is a potential solution that could reduce the need for new mining, lowering the overall environmental impact. In this experimentally based work, we evaluate the lithium recycling labor- and cost-intensive preprocessing stage that is currently

APA, Harvard, Vancouver, ISO, and other styles

45

Sasmoko, Khalid Zaman, Maida Malik, et al. "Environmental Effects of Bio-Waste Recycling on Industrial Circular Economy and Eco-Sustainability." Recycling 7, no. 4 (2022): 60. http://dx.doi.org/10.3390/recycling7040060.

Full text

Abstract:

Few prior studies have examined the social and environmental consequences of waste generation and recycling, resulting in a policy gap in the sustainability agenda. The research filled a knowledge vacuum in the literature by investigating the environmental repercussions of different waste generation and recycling processes in the Chinese economy. The study analyzed waste production and recycling statistics over the last 46 years, from 1975 to 2020, and their impact on the nation’s emissions per capita. This study used four primary approaches to determine the links between the examined variable

APA, Harvard, Vancouver, ISO, and other styles

46

Yagi, Ryohei, and Toru H. Okabe. "Review: Rhenium and its smelting and recycling technologies." International Materials Reviews 69, no. 2 (2024): 142–77. http://dx.doi.org/10.1177/09506608241229042.

Full text

Abstract:

Rhenium is utilized as an additive to improve the high-temperature strength and stability of materials, such as nickel-based superalloys, which are employed in jet engine turbine blades, alloys for ultrahigh-temperature thermocouples, and platinum catalysts, which are used in oil refining. Currently, around 80% of rhenium demand is for superalloy production, and this demand has been increasing with the increase in demand for aircrafts. The abundance of rhenium in the earth's crust is only 1 ppb (10−9), which is less than those of platinum and gold. Owing to the rare and unevenly distributed na

APA, Harvard, Vancouver, ISO, and other styles

47

Hari Rao, V. Sree, and P. Raja Sekhara Rao. "Stability analysis of resource-consumer dynamic models." ANZIAM Journal 47, no. 3 (2006): 413–38. http://dx.doi.org/10.1017/s1446181100009925.

Full text

Abstract:

AbstractA nutrient-consumer model involving a distributed delay in material recycling and a discrete delay in growth response has been analysed. Various easily verifiable sets of sufficient conditions for global asymptotic stability of the positive equilibrium solution of the model equations have been obtained and the length of the delay in each case has been estimated.

APA, Harvard, Vancouver, ISO, and other styles

48

MİÇOOĞULLARI, Seyit Ali, and Maya MOALLA. "Circular Economy, Solid Waste Recovery, and Growth: An Empirical Analysis for Sustainable Development in the 100th Anniversary of the Republic." Gaziantep University Journal of Social Sciences 22, Cumhuriyet'in 100. Yılı (2023): 373–85. http://dx.doi.org/10.21547/jss.1354297.

Full text

Abstract:

This article aims to examine the relationship between solid waste recycling and economic growth within the framework of the circular economy perspective in Turkiye. As Turkiye approaches its 100th anniversary of the Republic, achieving a sustainable and inclusive economic growth goal is of paramount importance. Solid waste recycling is now recognized as a process that not only reduces waste but also contributes positively to both economic growth and environmental preservation. In this context, the study utilizes quarterly data from 1994Q1 to 2020Q4 to comprehensively analyze the impact of soli

APA, Harvard, Vancouver, ISO, and other styles

49

Beltrán, Freddys R., Marina P. Arrieta, Eduardo Moreno, et al. "Evaluation of the Technical Viability of Distributed Mechanical Recycling of PLA 3D Printing Wastes." Polymers 13, no. 8 (2021): 1247. http://dx.doi.org/10.3390/polym13081247.

Full text

Abstract:

3D printing PLA wastes were recovered from a well-known reference grade and from different sources. The recovered wastes were subjected to an energic washing step and then reprocessed into films by melt-extrusion, followed by compression molding to simulate the industrial processing conditions. The obtained materials were characterized and the optical, structural, thermal and crystallization behavior are reported. The mechanical recycling process leads to an increase of the crystallinity and a decrease of the intrinsic viscosity of the formulations, particularly in the sample based on blends o

APA, Harvard, Vancouver, ISO, and other styles

50

Liu, Dawei, Aditi Basdeo, Catalina Suescun Gonzalez, et al. "Low-Cost Open-Source Melt Flow Index System for Distributed Recycling and Additive Manufacturing." Materials 17, no. 23 (2024): 5966. https://doi.org/10.3390/ma17235966.

Full text

Abstract:

The increasing adoption of distributed recycling via additive manufacturing (DRAM) has facilitated the revalorization of materials derived from waste streams for additive manufacturing. Recycled materials frequently contain impurities and mixed polymers, which can degrade their properties over multiple cycles. This degradation, particularly in rheological properties, limits their applicability in 3D printing. Consequently, there is a critical need for a tool that enables the rapid assessment of the flowability of these recycled materials. This study presents the design, development, and manufa

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!