Academic literature on the topic 'Dmtl'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Dmtl.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Dmtl"

1

Rizzo, Adriana Antonieta do Nascimento, and Leila Trevizan Braz. "Divergência genética entre cinco genótipos de melão rendilhado." Horticultura Brasileira 20, no. 2 (June 2002): 171–73. http://dx.doi.org/10.1590/s0102-05362002000200010.

Full text
Abstract:
Estimou-se a divergência genética entre cinco genótipos de melão rendilhado (Cucumis melo var. reticulatus Naud.) (JAB-20, JAB-21, JAB-22, JAB-23 e 'Bônus nº 2') e determinou-se qual a contribuição relativa das 16 características avaliadas [nº médio de flores masculinas, hermafroditas/planta; produção total de frutos/m², peso médio dos frutos comerciáveis; diâmetro médio transversal e longitudinal do fruto (DMTF e DMLF); diâmetro médio transversal da inserção do pedúculo (DMTP); espessura média do mesocarpo e epicarpo (EMM e EME); diâmetro médio longitudinal e transversal do lóculo (DMTL e DMLL); proporção da cavidade (PC); desprendimento de sementes (DS); teor de sólidos solúveis totais (SST), pH e acidez titulável (AT)] na divergência genética. Obtiveram-se dois grupos de similaridade: I- JAB-20, JAB-21 e 'Bônus nº2' e II- JAB-22 e JAB-23. As características DMLF, DMTP, DMLL, DS e SST foram as que mais contribuíram para a divergência genética entre os genótipos.
APA, Harvard, Vancouver, ISO, and other styles
2

Mary Sindhuja, N. M., and S. Kanthamani. "Three-Bit DMTL Phase Shifter for Phased Array Antennas." Journal of Circuits, Systems and Computers 28, no. 07 (June 27, 2019): 1950112. http://dx.doi.org/10.1142/s0218126619501123.

Full text
Abstract:
RF MEMS phase shifter is a device that is used to modify the transmission phase of RF signal and provide signal control. Phase shifters are high-value components used in phased array antenna architectures. In phased array antenna the phase shifter is used to provide reliable electronic beam steering. The proposed 3-bit distributed MEMS transmission line (DMTL) phase shifter is designed using elevated coplanar waveguide (ECPW) transmission line for the first time, which results in better return loss of [Formula: see text]14.23[Formula: see text]dB and an average insertion loss of [Formula: see text]1.46[Formula: see text]dB. This paper discusses the development of ECPW-based 3-bit DMTL phase shifter designed to operate at 15[Formula: see text]GHz.
APA, Harvard, Vancouver, ISO, and other styles
3

Pandey, Shilpi, Deepak Bansal, Maninder Kaur, K. J. Rangra, and Seema Verma. "Compact 4-Bit DMTL Phase Shifter for KuBand Applications." INROADS- An International Journal of Jaipur National University 5, no. 1s (2016): 67. http://dx.doi.org/10.5958/2277-4912.2016.00014.x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Afrang, Saeid. "Small size and low loss resonator type DMTL phase shifter." Microelectronics Journal 44, no. 5 (May 2013): 442–53. http://dx.doi.org/10.1016/j.mejo.2013.02.014.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Deng, Cheng, Jingfu Bao, Yijia Du, and Xinghai Zhao. "A novel DMTL capacitive switch with electrostatic actuation MAM capacitors." Microsystem Technologies 18, no. 5 (March 22, 2012): 537–41. http://dx.doi.org/10.1007/s00542-012-1467-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Teymoori, Mir Majid, Massoud Dousti, and Saeid Afrang. "A low‐loss compact six‐bit DMTL phase shifter for phased array antenna applications." International Journal of Circuit Theory and Applications 48, no. 12 (September 24, 2020): 2111–29. http://dx.doi.org/10.1002/cta.2871.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Saijets, Jan, Pekka Rantakari, and Tauno Vähä-Heikkilä. "Low loss KU- to KA-band analog DMTL phase shifter with 360° phase shift." Microwave and Optical Technology Letters 59, no. 6 (March 30, 2017): 1401–4. http://dx.doi.org/10.1002/mop.30543.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Pandey, Shilpi, Deepak Bansal, Prachi Jhanwar, Seema Verma, and K. J. Rangra. "Design of Reliable Analog DMTL Phase Shifter with Improved Performance for Ku Band Applications." Defence Science Journal 65, no. 5 (September 11, 2015): 403. http://dx.doi.org/10.14429/dsj.65.8377.

Full text
Abstract:
<p>An analog phase shifter based on distributed MEMS transmission line (DMTL) is designed for Ku band applications. Traditional RF MEMS phase shifter comprising 6 switches has limited phase shift of 37.75° due to instability region. A new concept of stopper is incorporated to achieve high phase shift. In the present paper, optimisation of the analog phase shifter is done to increase its phase shift upto 88.63°. Phase shift is a strong function of capacitance ratio which is increased from 1.75 to 2.95. The maximum operating voltage and mechanical resonant frequency for the phase shifter are 16 V and 8.3 KHz, respectively. The switching time is calculated to 56 μs. The simulated insertion loss of the phase shifter is -1.75 dB with return loss of -20.49 dB at 17 GHz. The simulated results are verified with analytical modelling which are in close match.</p>
APA, Harvard, Vancouver, ISO, and other styles
9

Garbulewski, Kazimierz, Stanisław Żakowicz, Simon Rabarijoely, and Anna Łada. "Sask method for testing hydraulic conductivity of soils by flat dilatometer (dmt)." Studia Geotechnica et Mechanica 34, no. 3 (October 1, 2012): 63–72. http://dx.doi.org/10.2478/sgm031205.

Full text
Abstract:
Abstract DMT is one of the most popular methods of determining soil parameters needed to design a safe construction. Apart from the basic outcome parameter obtained from DMT measurements hydraulic conductivity (k) can be determined, previously proposed DMTA and DMTC methods were modified. The basic idea of the method is that the return of the deformed membrane is due to soil and water pressure. In the proposed SASK method the hydraulic conductivity of the soil is determined by measuring time-varying pressures A and C. Research has been performed at the experimental site of the Department of Geotechnical Engineering, WULS. In the paper, the assumptions of the new method for determining the hydraulic conductivity k are presented. The proposed method allows us to determine a reliable value for the hydraulic conductivity of clay soils. Using this method, the value of hydraulic conductivity (k = 5,47*10-11) is similar to the results of BAT, DMTA and laboratory measurements.
APA, Harvard, Vancouver, ISO, and other styles
10

Afrang, Saied, Keyvan Samandari, and Ghader Rezazadeh. "A small size Ka band six-bit DMTL phase shifter using new design of MEMS switch." Microsystem Technologies 23, no. 6 (June 3, 2016): 1853–66. http://dx.doi.org/10.1007/s00542-016-2987-z.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Dmtl"

1

Istanbulluoglu, Ipek. "A Novel Modeling Methodology And Performance Improvement Technique For Dmtl Phase Shifters." Master's thesis, METU, 2006. http://etd.lib.metu.edu.tr/upload/2/12607522/index.pdf.

Full text
Abstract:
This thesis presents distributed MEMS transmission line (DMTL) phase shifters, emphasizing the circuit modeling and design as well as the performance improvement. A novel modeling methodology is introduced for DMTL unit sections, with bridge widths larger than 50 &
#956
m. The introduced model is compared with EM simulation results and the CLR modeling results. For structures with bridge widths larger than 50 &
#956
m, the introduced model fits the simulation results much better than the CLR model. The simulated structures are fabricated in METU micro-electronics facilities on glass substrates using gold structural layers. 1-20 GHz S-parameter measurement results of various DMTL structures are compared with the introduced model. It is observed that the S-parameters match except for a scaling need in the insertion loss. The measurement results give 2 dB insertion and 15 dB isolation at 20 GHz. The ABCD parameters of the introduced model are converted into S-parameters. Loss and the phase shift of the DMTL structures are expressed in terms of these S-parameters. These expressions are re-written as MATLAB code, from which the phase shift/loss (degree/dB) performance is evaluated. Therefore degree/dB plots with respect to bridge widths and center CPW conductor widths are obtained. From these plots the optimum DMTL phase shifters, which give maximum phase shift for minimum loss are determined for a pre-defined DMTL structure. To increase the degree/dB performance of a DMTL phase shifter, a change in the geometry of the DMTL phase shifters is proposed. The geometry change is based on inserting an open-ended stub through the signal line and connecting one side of the stub to the bridge. By this way, the stub capacitance is added to the shunt capacitance of the bridge satisfying a larger phase shift. The simulations point out a performance of 217 degree/dB at 20 GHz with a 15 % change in the 25 &
#956
m wide bridge height ratio.
APA, Harvard, Vancouver, ISO, and other styles
2

Haridas, Nakul Raghavanand. "Parylene based low actuation MEMS phase shifters for reconfigurable antenna applications." Thesis, University of Edinburgh, 2014. http://hdl.handle.net/1842/17079.

Full text
Abstract:
Wireless networks face ever-changing demands on their spectrum and infrastructure resources such as, increased communication bands, capacity-intensive data applications, and the steady growth of worldwide wireless subscribers. This rapid increase in the use of wireless communication and the dependence on a reliable connectivity leads manufacturers to seek systems which are ever smaller, low power, provide long range, and high bandwidth, whilst giving higher reliable technologies. In modern communication systems MEMS is now finding its way, replacing older more high power and non-linear systems. One of the important components of RF MEMS technology is the implementation of MEMS phase shifters for phased array applications that require better performance than arrays of conventional phase shifters. An important example is where RF MEMS devices can be applied to vary the characteristics of an antenna, such as beam steering or tuning in a multiband antenna. The core of this thesis is the development and fabrication of a novel Parylene based MEMS phase shifter. This is the first novel application of Parylene as the strength member of the MEMS bridge. The implementation provided MEMS devices with lower actuation voltage of < 25 V. The fabricated phases shifters provide higher RF performance such as < 1 dB insertion loss, linearity of > 65 dBm, and return loss of < -15 dB. The reliability of the fabricated devices were tested beyond 2 billion switching cycles. This is higher than competing MEMS capacitive devices with a maximum lifetime of 500 million cycles. The fabricated device provides a maximum phase shift of 16.82° at 2.5 GHz, whilst the nominal value of phase shift was 5.4° at 2.5 GHz within the stable region of operation. The fabricated device provides comparable results with respect to reference DMTL designs. The research carried out in this thesis has lead to a number of international publications and four granted patents. The generic nature of this technology can open new opportunities in the conception and application of new MEMS devices in communication and sensing applications. The ability to deliver miniature, low power and high efficiency MEMS capacitive devices, will revolutionise the next generation of tuneable RF components suitable for mobile and handheld devices of the future.
APA, Harvard, Vancouver, ISO, and other styles
3

Maury, Fabien. "Conception, réalisation et test de déphaseurs micro-ondes intégrant une technologie MEMS." Limoges, 2009. https://aurore.unilim.fr/theses/nxfile/default/a298bdca-bc9a-4ed2-9213-856531f9aaf7/blobholder:0/2009LIMO4017.pdf.

Full text
Abstract:
Les travaux entrepris dans cette thèse s'inscrivent dans un projet de partenariat avec la fondation d'entreprise EADS. Ils ont pour but la fabrication d'un système antennaire incluant des éléments de base MEMS offrant une bonne tenue en puissance et pouvant démontrer que cette technologie est capable de fournir de bonnes performances et une fiabilité suffisante à des niveaux de puissancess de quelques Watts. Ce système antennaire est un réseau d'antennes dont le rayonnement va pouvoir être contrôlé électroniquement par le biais de déphaseurs MEMS. Les travaux effectués au cours de cette thèse se sont portés sur la conception et la réalisation de ces déphaseurs incluant des capacités commutables MEMS
The work done here are about research project made with the EADS Foundation. The aim is to realize an RF MEMS antenna system with a good power handling, showing the feasibility of MEMS technology for power applications (beyond 1 W). More particularity, this antenna system is an antenna array where beamforming solution is achieved by RF MEMS phase shifters. During this thesis, phase shifters composed of MEMS switched capacitors have been designed, realized and tested
APA, Harvard, Vancouver, ISO, and other styles
4

Kirui, Joseph Kiprono. "ESR study of DMTM(TCNQ)₂." Thesis, University of British Columbia, 1990. http://hdl.handle.net/2429/29191.

Full text
Abstract:
The ESR g-value and susceptibility measurements for DMTM(TCNQ)₂ have been studied as a function of angle made by crystal with magnetic field and temperature. The angular dependence of g-value is fitted to g² = α+βcos2θ - γsin2θ for three orthogonal directions of crystal rotation. The principal g-values are close to those expected for TCNQ compounds: g₁ = 2.0034, g₂ = 2.0030, g₃ = 2.0024. The susceptibility as a function of temperature agrees with bulk susceptibility measurements except that the maximum position occurs at about 30 K. The results of Oostra et al. for bulk susceptibility showed a maximum at around 50 K. The phase transition reported by Visser et al. at 272 K is observed in the ESR data as a 15% decrease in susceptibility. The linewidth is remarkably anisotropic typical of TCNQ salts. The phase transition study is done for two orientations of the crystal with the magnet field. In one of the orientations the linewidth narrows from 0.15 to 0.11 gauss and in the other it narrows from 0.24 to 0.18 gauss. In the former case there is a growth of a second line due to the twinned stack; transformation twinning takes place at the phase transition. A small level-crossing interaction is inferred from the change in relative intensities of the lines near the crossover.
Science, Faculty of
Physics and Astronomy, Department of
Graduate
APA, Harvard, Vancouver, ISO, and other styles
5

Giske, Mats Andreas. "DML in VIDEO-CONFERENCING APPLICATIONS." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for elektronikk og telekommunikasjon, 2012. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-19416.

Full text
Abstract:
Today's audio in video-conference rooms do not in general have high quality audio standards.Most of the set-ups are PC-Speakers mounted on the wall, with a microphone on the table. With this, strong room modes are often excited from the speakers. When speaking to someone which also have bad equipment, the speech-intelligibility can be really bad. One solution presented with this Master thesis is to improve the loudspeaker set-up by mounting a DML(Distributed Mode Loudspeaker) above and parallel to the conference table. The DML will then radiate sound on both sides of the table equally in opposite phase, like a dipole. This will also minimize sound-radiation to the ceiling and the office-table.The DML is designed and modified from a loudspeaker originally deigned by the loudspeaker-company e-Scape. The Plexiglas panel, made out of an Acrylic material, has exciters mounted on the panel. After testing different combinations of two and three exciters in an anechoic chamber, the polar frequency response of the DML with only one exciter had a much better response than the other combinations.The idea of mounting the DML over the table is that the audience will get closer to the sound source, and room-effects will be very small compared to the direct signal. This should give a much better speech-intelligibility of the perceived sound signal compared to existing solutions. Subjective tests show that the majority of the participants preferred the DML rather than the PC-Speaker in all areas; a more natural sound, more closeness to the one speaking and better speech-intelligibility.One problem, which is seen on the measurements and feedback from the participants on the subjective test, is a low SPL(Sound Pressure Level) in the low frequency area. Under 100Hz the magnitude of the DML is reduced, compared to the response of ordinary monopole speakers. From this frequency area one can also see some dipole effects from the results, which gives us good qualities such as less radiation to the ceiling and the office table.
APA, Harvard, Vancouver, ISO, and other styles
6

Tchernitchko, Dimitri. "Études moléculaires de DMT1, un transporteur membranaire du fer." Paris 7, 2002. http://www.theses.fr/2002PA077183.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Xu, Yang. "Equalization algorithms for ADSL DMT system." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk2/tape17/PQDD_0004/MQ36756.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Guan, Juan. "Investigations on natural silks using dynamic mechanical thermal analysis (DMTA)." Thesis, University of Oxford, 2013. http://ora.ox.ac.uk/objects/uuid:c16d816c-84e3-4186-8d6d-45071b9a7067.

Full text
Abstract:
This thesis examines the dynamic mechanical properties of natural silk fibres, mainly from silkworm species Bombyx mori (B. mori) and spider species Nephila edulis, using dynamic mechanical thermal analysis, DMTA. The aim is not only to provide novel data on mechanical properties of silk, but also to relate these properties to the structure and morphology of silk. A systematic approach is adopted to evaluate the effect of the three principal factors of stress, temperature and hydration on the properties and structure of silk. The methods developed in this work are then used to examine commercially important aspects of the ‘quality’ of silk. I show that the dynamic storage modulus of silks increases with loading stress in the deformation through yield to failure, whereas the conventional engineering tensile modulus decreases significantly post-yield. Analyses of the effects of temperature and thermal history show a number of important effects: (1) the loss peak at -60 °C is found to be associated the protein-water glass transition; (2) the increase in the dynamic storage modulus of native silks between temperature +25 and 100 °C is due simply to water loss; (3) a number of discrete loss peaks from +150 to +220°C are observed and attributed to the glass transition of different states of disordered structure with different intermolecular hydrogen bonding. Excess environmental humidity results in a lower effective glass transition temperature (Tg) for disordered silk fractions. Also, humidity-dynamic mechanical analysis on Nephila edulis spider dragline silks has shown that the glass transition induces a partial supercontraction, called Tg contraction. This new finding leads to the conclusion of two independent mechanisms for supercontraction in spider dragline silks. Study of three commercial B. mori cocoon silk grades and a variety of processed silks or artificial silks shows that lower grade and poorly processed silks display lower Tg values, and often have a greater loss tangent at Tg due to increased disorder. This suggests that processing contributes significantly to the differences in the structural order among natural or unnatural silks. More importantly, dynamic mechanical thermal analysis is proposed to be a potential tool for quality evaluation and control in silk production and processing. In summary, I demonstrate that DMTA is a valuable analytical tool for understanding the structure and properties of silk, and use a systematic approach to understand quantitatively the important mechanical properties of silk in terms of a generic structural framework in silk proteins.
APA, Harvard, Vancouver, ISO, and other styles
9

Hägglund, Adel, and Suan Cing Nem. "Patienters erfarenheter av egenvård vid Diabetes Mellitus Typ 2 : Literaturstudie." Thesis, Högskolan i Gävle, Avdelningen för hälso- och vårdvetenskap, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-28823.

Full text
Abstract:
Bakgrund: Diabetes typ 2 (DMT2) står för majoriteten av all diabetes i Sverige som internationellt, vilket har satts i samband med vår moderna livsstil, minskad fysisk aktivitet och en tilltagande ökning av kroppsvikt. Orsaken kan t.ex. relateras till patientens ärftliga betingad eller individens levnadsvanor. Egenvård är viktig för att förebygga eller minska senkomplikationer. Syftet: Syftet med det föreliggandeexamensarbetetvar attbeskriva vuxna patienters erfarenheter av egenvård vid DMT2samt granska datainsamlingsmetoder och urvalsgrupp använts i artiklarna.  Metod: Litteraturstudieutfördes med en beskrivande design där sammanfattas 12 kvalitativa artiklar. Huvudresultat:Patienter hade positiv inställning livsstilsförändringar och började ta ansvar för sin egenvård. En del patienter hade svårigheter att ta till sig kunskaper och tillämpa dessa i sin egenvård, arbetssituation påverkad, låg inkomst och en känsla av utanförskap både från hemmet och omgivningen. En del av patienter upplevde socialt stöd från familj och närstående samt hade god kontakt med vården.  Slutsats:Föreliggande examenarbetevisade att patientens levnadssituation, relation till sin omgivning måste sättas i centrum. Patienten möjlighet att få en vårdkontakt förbättras, med syfte att ge individanpassad kunskap, motivera och ge mer tid. Vidare forskning bör undersöka familjens förhållningssätt till personen som har DMT2 för att få en djupare förståelse om vad familjen kan göra för att skapa en holistisk syn.  Nyckelord: DMT2, Egenvård, Erfarenhet, Vuxna patienter
Background:Diabetes type 2 (DMT2) accounts for the majority of all diabetes in Sweden as well as global, which has been associated with our modern lifestyles, reduced physical activities and an increase in body weight. Causes can be, for example, related to the patient's hereditary condition or the individual's living habits. Self-care is important to prevent or reduces the late complications. Aim: The aim of the present thesis was to describe adult patients’ experiences of self-care with DMT2 and examine the data collection methods and sample group used of the articles. Methods: A literature study was conducted with a descriptive design summarizing 12 qualitative articles. Main result: Patients had positive attitude to lifestyle changes and began taking responsibility for their self-care. Some patients had difficulty in acquiring knowledge and applying them for their own care, affected in work situation, weak income and a sense of alienation both at home and surrounding. Some of patients experienced social support from family and close relatives and had good contact with healthcare. Conclusion: The present study shows that the patient's living situation, relationship with his surrounding, must be placed at the center. The patient possibilities for care contact should be improved in order to give him individualized knowledge, motivate and give more time.  Further research should investigate the family's approach to the person with DMT2 to gain a deeper understanding of what the family can do to create holistic view. Keyword: Adult patients,DMT2, Experience, Self-care,
APA, Harvard, Vancouver, ISO, and other styles
10

Zhang, Liang. "Error control coding in ADSL DMT system." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk2/tape17/PQDD_0001/MQ36760.pdf.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Dmtl"

1

1962-, Burnham Clint, Szewczyk Monika, Pakasaar Helga, and Presentation House Gallery, eds. Jeremy Shaw: DMT. North Vancouver, B.C: Presentation House Gallery, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Faria, Sérgio Henrique, Sepp Kipfstuhl, and Anja Lambrecht. The EPICA-DML Deep Ice Core. Berlin, Heidelberg: Springer Berlin Heidelberg, 2018. http://dx.doi.org/10.1007/978-3-662-55308-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Lin, Yuan-Pei. Filter bank transceivers for OFDM and DMT systems. Cambridge: Cambridge University Press, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Printing, London College of. Time calibration: Report for postgraduate diploma in DMT 1986. London: LCP, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Tryptamine palace: 5-MeO-DMT and the Sonoran Desert Toad. Rochester, Vt: Park Street Press, 2009.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Printing, London College of. Investigation of Logotype design: Report for Postgraduate diploma in DMT 1986. London: LCP, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Strassman, Rick. DMT, la molécule de l'esprit: Les potentialités insoupçonnées du cerveau humain. Chambéry: Éd. Exergue, 2005.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Printing, London College of. Computer generated airwork for flexography: Report for postgraduate diploma in DMT 1968. London: LCP, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Printing, London College of. Facets: A fashion magazine for India : report for postgraduate diploma in DMT 1986. London: LCP, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Printing, London College of. Variations: From Purcell to Pixels music printing and digital typography : report for postgraduate diplomain DMT 1986. London: LCP, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Dmtl"

1

Koul, Shiban Kishen, and Sukomal Dey. "DMTL Phase Shifter Design Using MAM Capacitors and a MEMS Bridge." In Radio Frequency Micromachined Switches, Switching Networks, and Phase Shifters, 117–30. Boca Raton, FL : CRC Press, Taylor & Francis Group, [2019]: CRC Press, 2019. http://dx.doi.org/10.1201/9781351021340-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Koul, Shiban Kishen, and Sukomal Dey. "Digital MEMS Phase Shifters Using Combinations of Switched-Line and DMTL Topologies." In Radio Frequency Micromachined Switches, Switching Networks, and Phase Shifters, 245–67. Boca Raton, FL : CRC Press, Taylor & Francis Group, [2019]: CRC Press, 2019. http://dx.doi.org/10.1201/9781351021340-13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Singh, V., G. Anitha, and K. Usha Kiran. "Conventional DMTL Phase Shifter is Designed Without Meta-material and with Meta-material." In Lecture Notes in Electrical Engineering, 21–32. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-7293-2_3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Lukas, Thomas J., Daniela V. Rosa, Luiz Alexandre V. Magno, Bruno R. Souza, Marco A. Romano-Silva, Hisao Masai, Kazuhisa Kohda, et al. "Dmel." In Encyclopedia of Signaling Molecules, 526. New York, NY: Springer New York, 2012. http://dx.doi.org/10.1007/978-1-4419-0461-4_100355.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Simola, Nicola, Micaela Morelli, Tooru Mizuno, Suzanne H. Mitchell, Harriet de Wit, H. Valerie Curran, Celia J. A. Morgan, et al. "DMTS." In Encyclopedia of Psychopharmacology, 416. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-540-68706-1_4207.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Gooch, Jan W. "DMT." In Encyclopedic Dictionary of Polymers, 238. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_3896.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Pfletschinger, Stephan. "DMT Modulation." In Handbook of Computer Networks, 473–91. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2011. http://dx.doi.org/10.1002/9781118256053.ch31.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Borrie, Helen. "DML Queries." In The Firebird Book: A Reference for Database Developers, 353–85. Berkeley, CA: Apress, 2004. http://dx.doi.org/10.1007/978-1-4302-0743-6_20.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Levi, Itamar, and Alexander Fish. "DML Control." In Dual Mode Logic, 89–114. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-40786-5_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Delley, B. "DMol Methodology and Applications." In Density Functional Methods in Chemistry, 101–7. New York, NY: Springer New York, 1991. http://dx.doi.org/10.1007/978-1-4612-3136-3_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Dmtl"

1

Saiteja, C., Vineeta Singh, K. V. Venkatesh, and Usha Kiran Kommuri. "Miniaturizing of RF MEMS DMTL phase shifter." In 2017 International Conference on Nextgen Electronic Technologies: Silicon to Software (ICNETS2). IEEE, 2017. http://dx.doi.org/10.1109/icnets2.2017.8067975.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Maury, F., A. Pothier, J. C. Orlianges, D. Mardivirin, T. Reveyrand, F. Conseil, and P. Blondy. "Ku band DMTL medium power phase shifters." In 2009 IEEE MTT-S International Microwave Symposium Digest (MTT). IEEE, 2009. http://dx.doi.org/10.1109/mwsym.2009.5165906.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Sahu, Amit K., Rajeev K. Parida, Rashmirekha K. Mishra, Deepak K. Naik, and Dhruba C. Panda. "Extraction of DMTL Equivalent Circuit Parameters Using SMPSO." In 2020 IEEE International Women in Engineering (WIE) Conference on Electrical and Computer Engineering (WIECON-ECE). IEEE, 2020. http://dx.doi.org/10.1109/wiecon-ece52138.2020.9397931.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Luikui, Jin, Wu Qun, Tang Kai, He Xunjun, Yang Guohui, and Fu Jiahui. "A Wafer-Scale Packaging for RF DMTL Phase Shifter." In 2008 China-Japan Joint Microwave Conference (CJMW 2008). IEEE, 2008. http://dx.doi.org/10.1109/cjmw.2008.4772512.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Guclu, Caner, Cagri Cetintepe, Ozlem Aydin Civi, Simsek Demir, and Tayfun Akin. "35 GHz phased array antenna using DMTL phase shifters." In 2010 10th Mediterranean Microwave Symposium (MMS). IEEE, 2010. http://dx.doi.org/10.1109/mmw.2010.5605151.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Kanthamani, S., N. M. Mary Sindhuja, and R. Priyanka. "Analysis of DMTL phase shifter using RF MEMS power sensor." In 2017 Conference on Emerging Devices and Smart Systems (ICEDSS). IEEE, 2017. http://dx.doi.org/10.1109/icedss.2017.8073673.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Wu, Qun, Kai Tang, Zi-Rui Feng, Feng-Lin Sun, and Le-Wei Li. "A DMTL Phase Shifter Using Insulation Layer and Saw-Shaped CPW." In 2007 Asia-Pacific Microwave Conference - (APMC 2007). IEEE, 2007. http://dx.doi.org/10.1109/apmc.2007.4554687.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kanthamani, S., and N. M. Mary Sindhuja. "Design of 30 degree DMTL Phase Shifter for K band applications." In 2018 Conference on Emerging Devices and Smart Systems (ICEDSS). IEEE, 2018. http://dx.doi.org/10.1109/icedss.2018.8544324.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Topalli, K., M. Unlu, O. A. Civi, S. Demir, S. Koc, and T. Akin. "A monolithic phased array using 3-bit DMTL RF MEMS phase shifters." In 2006 IEEE Antennas and Propagation Society International Symposium. IEEE, 2006. http://dx.doi.org/10.1109/aps.2006.1710573.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Srihari, G., and T. Shanmuganantham. "Design and Analysis of MEMS Based RF Capacitive Switch for DMTL Phase Shifter." In 2019 TEQIP III Sponsored International Conference on Microwave Integrated Circuits, Photonics and Wireless Networks (IMICPW). IEEE, 2019. http://dx.doi.org/10.1109/imicpw.2019.8933250.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Dmtl"

1

Hu, Yalin, Dustin Tso, Sarina Kapai, and Marc Feldman. D-DMTD: Digital Dual Mixer Time Difference. Office of Scientific and Technical Information (OSTI), September 2017. http://dx.doi.org/10.2172/1494164.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Favorite, Jeffrey A. (U) Neutron-Induced Gamma-Ray Calculations Using DMTK. Office of Scientific and Technical Information (OSTI), September 2015. http://dx.doi.org/10.2172/1214636.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Brenner, Matthew. Acceleration of Advanced CN Antidote Agents for Mass Exposure Treatments: DMTS. Fort Belvoir, VA: Defense Technical Information Center, December 2014. http://dx.doi.org/10.21236/ada613637.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Nexsen, W., and J. Weir. DML and Foil Measurements of ETA Beam Radius. Office of Scientific and Technical Information (OSTI), May 2005. http://dx.doi.org/10.2172/877781.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Temple, Brian, and David Pimentel. LANL12-RS-108J Device Modeler Tool Kit - DMTK Final Report for FY14. Office of Scientific and Technical Information (OSTI), September 2014. http://dx.doi.org/10.2172/1158828.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Lemson, Gerard, Omar Laurino, Laurent Bourges, Mark Cresitello-Dittmar, Markus Demleitner, Tom Donaldson, Patrick Dowler, et al. VO-DML: a consistent modeling language for IVOA data models Version 1.0. Edited by Gerard Lemson and Omar Laurino. International Virtual Observatory Alliance, September 2018. http://dx.doi.org/10.5479/ads/bib/2018ivoa.spec.0910l.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Cownie, J., J. Jr, B. de Supinski, and K. Warren. A White Paper Prepared for the OpenMP Architectural Review Board on DMPL: An OpenMP DLL Debugging Interface. Office of Scientific and Technical Information (OSTI), March 2004. http://dx.doi.org/10.2172/15014038.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Temple, Brian Allen, and David A. Pimentel. LANL12-RS-108J Report on Device Modeler Testing of the Device Modeler Tool Kit. DMTK in FY14. Office of Scientific and Technical Information (OSTI), September 2014. http://dx.doi.org/10.2172/1158829.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Abouammoh, A., and E. El-Neweihi. Closure of the NBUE (New Better Than Used in Expectation) and DMRL (Decreasing Mean Residual Life) Classes under Formation of Parallel Systems. Fort Belvoir, VA: Defense Technical Information Center, December 1985. http://dx.doi.org/10.21236/ada172094.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Thompson, D. B., and W. J. Bradley. Integrated Information Support System (IISS). Volume 5. Common Data Model Subsystem. Part 17. NDML Precompiler Transform Internal Schema Access Path to Generic DML Product Specification. Fort Belvoir, VA: Defense Technical Information Center, November 1985. http://dx.doi.org/10.21236/ada182006.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography