Log in

Relevant bibliographies by topics / Draw Textured Yarn / Journal articles

To see the other types of publications on this topic, follow the link: Draw Textured Yarn.

Journal articles on the topic 'Draw Textured Yarn'

Author: Grafiati

Published: 7 June 2025

Last updated: 2 August 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 45 journal articles for your research on the topic 'Draw Textured Yarn.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Abbasi, Marjan, Mohammad Reza Mohades Mojtahedi, and Richard Kotek. "Experimental study on texturability of filament yarns produced from recycled PET." Textile Research Journal 90, no. 23-24 (2020): 2703–13. http://dx.doi.org/10.1177/0040517520925859.

Full text

Abstract:

In the present work, the texturability of filament yarns produced from recycled bottle grade polyethylene terephthalate (R-PET) and new fiber grade PET (FG-PET) were investigated and compared experimentally. Yarn spun on a spin-draw spinning machine was draw-textured. Elongation at break in each fiber was set to reach 30 ± 5% in the texturing machine. The effect of the draw-texturing conditions on thermomechanical, structural, and crimp properties were examined. Draw-texturing behaviors of the fibers were analyzed using differential scanning calorimetry and measurements of intrinsic viscosity,

APA, Harvard, Vancouver, ISO, and other styles

2

Stojanovic, Petar, Marija Savic, Dusan Trajkovic, Jovan Stepanovic, Miodrag Stamenkovic, and Mirjana Kostic. "The effect of false-twist texturing parameters on the structure and crimp properties of polyester yarn." Chemical Industry and Chemical Engineering Quarterly 23, no. 3 (2017): 411–19. http://dx.doi.org/10.2298/ciceq160720055s.

Full text

Abstract:

In this paper, the effect of false-twist texturing parameters (texturing speed, heater temperature, draw ratio and disc-to-yarn speed ratio (D/Y ratio)) on the structure and crimp properties of polyester yarn has been studied using a high temperature heater and high texturing speeds. Textured yarn was analyzed and characterized in terms of the degree of crystallinity, degree of orientation and crimp properties (crimp contraction, crimp module and crimp stability). The most important parameters, significantly affecting yarn temperature and its uniformity and thus textured yarn structure and cri

APA, Harvard, Vancouver, ISO, and other styles

3

Çeven, Erhan, Sinem Yelkovan, Nejla Çeven, Günaydin Karakan, and Eda Çorapçi. "Effect of production parameters of polyester weft yarns on some thermal comfort properties of drapery fabrics." Tekstilna industrija 71, no. 2 (2023): 23–35. http://dx.doi.org/10.5937/tekstind2302023c.

Full text

Abstract:

This study has been performed to investigate the eff ECT some weft yarn properties such as weft yarn type, fiber cross sectional shape of the yarn and the incorporated TiO 2 amount (%) during yarn spinning process on some thermal comfort properties of drapery fabrics such as thermal, air permeability and water vapor permeability properties. 12 woven drapery fabrics were produced by using 334/192 denier/fi l draw textured polyester and 400/192 denier/fi l air jet textured polyester weft yarns produced with different fiber cross sectional shape (round, hollow) and different amount of incorporate

APA, Harvard, Vancouver, ISO, and other styles

4

Yildirim, Kenan, Sule Altun, and Yusuf Ulcay. "Relationship between Yarn Properties and Process Parameters in False-Twist Textured Yarn." Journal of Engineered Fibers and Fabrics 4, no. 2 (2009): 155892500900400. http://dx.doi.org/10.1177/155892500900400205.

Full text

Abstract:

The properties of false-twist textured yarns in the aspects of crimp characteristic and tensile behavior depend mainly on the draw ratio and the D/Y ratio. This study comprises investigations of the effect of D/Y ratio and draw ratio on the crimp and tensile properties and percent crystallinity. While there was no noticeable change on the percent crystallinity by altering these parameters, tenacity increased and crimp contraction decreased with increasing draw ratio, and crimp stability decreased when the D/Y ratio increased. K/S value also decreased with increasing draw ratio.

APA, Harvard, Vancouver, ISO, and other styles

5

Martiningsih, Martiningsih, Dewanto, and Sri Suhartini. "Analisa Pengendalian Kualitas Problem Visual Draw Textured Yarn." Jurnal Teknologika 14, no. 1 (2024): 109–20. http://dx.doi.org/10.51132/teknologika.v14i1.254.

Full text

Abstract:

Industri Tekstil merupakan industri yang terus dan selalu berkembang seiring dengan perkembangan jaman. Bertambahnya jumlah manusia yang disertai meningkatnya kebutuhan dari berbagai macam aspek kehidupannya. Semua itu menuntut adanya perubahan kuantitas dan kualitas dari hasil produksi. Di Indonesia ada beberapa industri tekstil yang berskala Internasional. Salah satunya adalah PT. Indorama Synthetics Tbk, dimana perusahaan tersebut dari tahun ke tahun menunjukkan perkembangannya.Perkembangan kapasitas produksi, didukung pembaharuan teknologi dan kemampuan dari sumber daya manusianya.Semua as

APA, Harvard, Vancouver, ISO, and other styles

6

Shin, Eun Joo, Eun Nyeong Lee, Soon Mo Choi, and Eun Ji Sung. "Design and development of functional fabrics with dust- and sound- absorbing properties." Journal of Industrial Textiles 48, no. 1 (2017): 162–77. http://dx.doi.org/10.1177/1528083717725910.

Full text

Abstract:

In an environmentally polluted environment, woven curtain fabrics that collect dust and pollen play an important health-protective role in interior decoration. However, devices or evaluation factors for measuring the dust adsorption ability of interior products have not been developed. To resolve this deficiency, we developed an apparatus that directly measures the dust adsorption and devised two test parameters (dust interrupting capability and fine dust adsorption capacity) for quantifying the dust adsorption. We also investigated the physical properties affecting the dust adsorption ability

APA, Harvard, Vancouver, ISO, and other styles

7

B., Basu and R. N. Josh. "Impact of the Secondary Heater Temperature on the Properties of Draw Textured Yarn and its Fabric." Journal Of The Textile Association (JTA) 85, no. 5 (2025): 1–7. https://doi.org/10.5281/zenodo.14973990.

Full text

Abstract:

Synthetic yarn especially draw textured yarn (DTY) is increasingly favored worldwide due to itsadvantages, availability, and ease of production over natural fibers. The bulk of DTY plays a criticalrole in determining fabric properties, influenced significantly by the secondary heater temperatureduring manufacturing. In this direction, trials were conducted on an AFT-1100-11DD machine using240/48 SD, DD polyester POY. Six trials were conducted by varying the secondary heatertemperature while maintaining other parameters constant. Yarn tensions and fabric appearanceswere evaluated across differe

APA, Harvard, Vancouver, ISO, and other styles

8

Chang, S. P., Chin Mei Lin, Ching Wen Lou, Wen Hao Hsing, and Jia Horng Lin. "Manufacture and Performance Evaluation of Elastic/Bamboo Wrapped Yarn." Advanced Materials Research 55-57 (August 2008): 425–28. http://dx.doi.org/10.4028/www.scientific.net/amr.55-57.425.

Full text

Abstract:

Bamboo charcoal shows many advantages such as: moisture-proof foul smells reduction, the release of negative ion and far infrared ray, keep warm etc. For the purpose of increasing disersification, comfortable and beautiful feeling of the fiber efficiency, it already popularly applied to textile industry. This study used the elastic fibers as core yarn that was covered with polyester textured yarn contained bamboo charcoal to produce covered yarn. Elastic yarn was draw for suitable ratio and then covered with polyester yarn to form covered yarn, different draw ratio worked by changing roller sp

APA, Harvard, Vancouver, ISO, and other styles

9

Nugroho, Emmanuel Agung. "ANALISA FAKTOR KUALITAS BENANG DTY PADA UNIT PRODUKSI POLITEKNIK ENJINERING INDORAMA MENGGUNAKAN FUZZY LOGIC CONTROL." Ramatekno 1, no. 2 (2022): 33–42. http://dx.doi.org/10.61713/jrt.v1i2.36.

Full text

Abstract:

   DTY (Draw Textured Yarn) atau benang bertexture merupakan salah satu hasil produksi dari Vocational Training Center politeknik Enjinering Indorama sebagai mitra Perguruan tinggi PT Indorama Synthetics Tbk. DTY merupakan proses lanjut yang berasal dari POY (Partially Oriented Yarn). Proses pembuatan benang texturized dilakukan melalui metode pemuntiran atau twist dan penarikan dengan perbandingan putaran positorq dari rol pertama dengan rol kedua yang biasa dikenal dengan draw ratio, melalui pemanasan pada Primary heater dan secondary heater dengan suhu tertentu. Faktor Kua

APA, Harvard, Vancouver, ISO, and other styles

10

Nugroho, Emmanuel Agung. "ANALISA FAKTOR KUALITAS BENANG DTY PADA UNIT PRODUKSI POLITEKNIK ENJINERING INDORAMA MENGGUNAKAN FUZZY LOGIC CONTROL." Ramatekno 2, no. 1 (2022): 33–42. http://dx.doi.org/10.61713/jrt.v2i1.46.

Full text

Abstract:

   DTY (Draw Textured Yarn) atau benang bertexture merupakan salah satu hasil produksi dari Vocational Training Center politeknik Enjinering Indorama sebagai mitra Perguruan tinggi PT Indorama Synthetics Tbk. DTY merupakan proses lanjut yang berasal dari POY (Partially Oriented Yarn). Proses pembuatan benang texturized dilakukan melalui metode pemuntiran atau twist dan penarikan dengan perbandingan putaran positorq dari rol pertama dengan rol kedua yang biasa dikenal dengan draw ratio, melalui pemanasan pada Primary heater dan secondary heater dengan suhu tertentu. Faktor Kua

APA, Harvard, Vancouver, ISO, and other styles

11

Wu, Chang-Mou, and Tien-Lai Chu. "The effect of inorganic antimicrobial agents on PET filament properties." Journal of Industrial Textiles 52 (August 2022): 152808372211482. http://dx.doi.org/10.1177/15280837221148251.

Full text

Abstract:

In this study, a polybutylene terephthalate (PBT) antimicrobial masterbatch containing silver, zinc, and copper antimicrobial agents was added to polyethylene terephthalate (PET) and spun into an antimicrobial partially oriented yarn which was then texturized into a draw-textured yarn (DTY). Filtration pressure rise and spinning tests indicated that the silver antimicrobial masterbatch had the best long-term spinnability. In addition, the strength and elongation of the antimicrobial DTY were reported to match practical standards, indicating that PET containing a silver antimicrobial agent can

APA, Harvard, Vancouver, ISO, and other styles

12

Zhang, Shihan, Junfeng Jing, Junyang Zhang, Jin Zhao, and Shuai Li. "Draw Textured Yarn Packages Hairiness Defect Detection Based on the Multi-directional Anisotropic Gaussian Directional Derivative." Fibers and Polymers 23, no. 13 (2022): 3655–64. http://dx.doi.org/10.1007/s12221-022-4241-x.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Hu, Jong-Tea. "Dyeing Properties of Nylon Textured Yarn according to False Twist Texturing Parameters(I) - Effect of Draw Ratio -." Textile Coloration and Finishing 20, no. 2 (2008): 47–52. http://dx.doi.org/10.5764/tcf.2008.20.2.047.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Siyao, Mao, Su Liu, Zhang Peihua, and Long Hairu. "Functional Investigation on Automotive Interior Materials Based on Variable Knitted Structural Parameters." Polymers 12, no. 11 (2020): 2455. http://dx.doi.org/10.3390/polym12112455.

Full text

Abstract:

With the rapid development of technical textiles, more and more researchers have focused on developing high performance textiles to meet various needs. The automotive industry is a major market for technical textiles. Compared to other types of fabric, weft-knitted fabric has good extensibility and elasticity, as well as a hand-feel, and it is gradually becoming the preferred type of interior fabric for automobiles. This paper aims to develop an automotive fabric with good comfort and durability. Sixteen types of weft-knitted fabrics with eight different structures and two different materials

APA, Harvard, Vancouver, ISO, and other styles

15

Hu, Jong-Tea. "Physical Properties of Nylon Textured Yarn according to False Twist Texturing Parameters (I) - Effect of Speed and Draw Ratio -." Textile Coloration and Finishing 20, no. 1 (2008): 28–35. http://dx.doi.org/10.5764/tcf.2008.20.1.028.

Full text

APA, Harvard, Vancouver, ISO, and other styles

16

Kang, YoungA, EunNyeong Lee, KwanChul Lee, SoonMo Choi, and EunJoo Shin. "Acoustic properties of sound-absorbing polyester fabrics woven with thick staple and thin draw textured yarn for use in interior decoration." Journal of The Textile Institute 110, no. 2 (2018): 202–10. http://dx.doi.org/10.1080/00405000.2018.1508798.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Fidan, Gülbin, Yasemin Korkmaz, and Halil İbrahim ÇELİK. "Effects of filament fineness and disc type of drawn textured polyester yarns on carpet resilience and appearance retention performance." Journal of Industrial Textiles 52 (August 2022): 152808372211305. http://dx.doi.org/10.1177/15280837221130516.

Full text

Abstract:

The deformation on the carpet texture is generally caused by foot traffic, furniture loading and soiling. The resistance of the carpet to texture distortion depends on the pile yarn characteristic and morphology. In this study, the resilience and appearance retention of carpet samples produced with drawn textured polyester pile yarns which are widely used in the carpet industry, were investigated. In this context, 6 pile yarns were produced with 3 different filament finenesses (3.13, 2.08 and 1.56 dpf) and 2 different disc types (polyurethane and ceramic). The carpet specimens were applied to

APA, Harvard, Vancouver, ISO, and other styles

18

Shaikh, Tasnim N., and Someswar S. Bhattacharya. "Deriving an empirical formula to determine the optimum level of false-twist in mechanically-crimped textured polyester yarn." Textile Research Journal 81, no. 19 (2011): 1995–2005. http://dx.doi.org/10.1177/0040517511407374.

Full text

Abstract:

Flat polyester yarn is bulked by the mechanical crimp texturizing process. The magnitude of the false-twist, introduced together with the torsional rigidity of the supply yarn, has a significant effect on the transformation process. The torsional rigidity of the supply yarn is in turn influenced by its fineness and bending characteristics. It is therefore deemed necessary to establish a mathematical relationship between the optimum false-twist level and the yarn fineness for materials with known bending characteristics. Such a relationship may help in producing a yarn with optimum bulk propert

APA, Harvard, Vancouver, ISO, and other styles

19

Sarıoğlu, Esin, and Osman Babaarslan. "Porosity and air permeability relationship of denim fabrics produced using core-spun yarns with different filament finenesses for filling." Journal of Engineered Fibers and Fabrics 14 (January 2019): 155892501983781. http://dx.doi.org/10.1177/1558925019837810.

Full text

Abstract:

In this article, porosity and air permeability of denim fabric produced from filament core-spun yarns with different filament fineness and yarn linear density were demonstrated. For this purpose, 110 dtex drawn textured polyester filaments with conventional, fine, and micro finenesses were used as core part, and combed cotton fiber was used as sheath part to obtain core-spun yarns with four different yarn linear density on a modified ring spinning system with the same spinning parameters. Besides the production of core-spun yarns, 100% cotton ring-spun yarns were produced as control group at t

APA, Harvard, Vancouver, ISO, and other styles

20

SINTANI, Ryuji, and Atsushi OKAJIMA. "Air-Drag Coefficient of Polyester Textured Yarns." Sen'i Kikai Gakkaishi (Journal of the Textile Machinery Society of Japan) 55, no. 6 (2002): T59—T64. http://dx.doi.org/10.4188/transjtmsj.55.6_t59.

Full text

APA, Harvard, Vancouver, ISO, and other styles

21

Tehran, Mohammad Amani, Bahareh Azimi, and Mohammad Reza Mohades Mojtahedi. "Investigating the Effect of False Twist Texturing Process on the Color Coordinates Variation of Spun-dyed Polyester Filament Yarns." Journal of Engineered Fibers and Fabrics 6, no. 3 (2011): 155892501100600. http://dx.doi.org/10.1177/155892501100600307.

Full text

Abstract:

In this study, color coordinates variation of spun-dyed polyester filament yarns subjected to the false twist texturing process was investigated. Furthermore, the effect of different processing parameters including D/Y ratio, twist, heater temperature, texturing speed, overfeed, the draw ratio and intermingling process on the color coordinates variation of textured yarns was studied. Finally, the magnitude of color variation was analyzed by studying the structure, crimp and tensile properties of the yarns. The results show that the nature of texturing and intermingling process had a significan

APA, Harvard, Vancouver, ISO, and other styles

22

Xiaorong, Gong, Zhang Shouyun, and Wang Jishan. "Mixed versus Networked Bio-Based PA56/Polyethylene Terephthalate Composite Yarns: A Study of Two Modification Methods." Journal of Biobased Materials and Bioenergy 15, no. 1 (2021): 90–96. http://dx.doi.org/10.1166/jbmb.2021.2039.

Full text

Abstract:

Two bio-based PA56/PET composite yarns were manufactured in this study, namely, the mixed and networked composite yarns, by using different modification methods. The results showed that the effect of mixing modification by adding the bio-based PA56 into PET was unsatisfactory. When the ratio of the added bio-based PA56 was smaller than 30%, the modification effect was insignificant; while the ratio was above 30%, the dispersion uniformity was very poor. There were also the problems of the fast rise of pressure in the component and pre-filter, short life cycle, a large number of broken ends, an

APA, Harvard, Vancouver, ISO, and other styles

23

Mehrabli, Bahareh, Mohammad Reza Mohaddes Mojtahedi, and Ahmad Mousavi Shoushtari. "Investigation on Physical Properties of Textured Yarns Produced from PP/LDPE Blends." Journal of Engineered Fibers and Fabrics 9, no. 4 (2014): 155892501400900. http://dx.doi.org/10.1177/155892501400900416.

Full text

Abstract:

Presently, for economic and technological concerns, production of blended fibers has attracted the attention of industrial technologists and academic researchers. The importance of blended fibers can be derived from its use in the various fields such as geotextiles, composites, and insulation. In this study, PP/LDPE blended filament yarns with blend ratios of 100/0, 99/1, 97/3, 95/5, 93/7, 90/10 were melt spun, drawn, and textured at temperatures of 110, 120,130,140 and 150°C. Tensile properties (except modulus) of the textured yarns spun from PP/LDPE blends were found to be higher than those

APA, Harvard, Vancouver, ISO, and other styles

24

Ghassemi, A., M. R. M. Mojtahedi, and R. Semnani Rahbar. "Investigation on the physical and structural properties of melt-spun multifilament yarns, drawn yarns and textured yarns produced from blend of PP and oxidized PP." Fibers and Polymers 12, no. 6 (2011): 789–94. http://dx.doi.org/10.1007/s12221-011-0789-6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

Canoglu, Suat, Feyza Basturk, and Fatih Suvari. "Investigating the effects of draw ratio, hot-pin temperature, and overfeeding on the color values of air-jet textured polyester yarns." Journal of The Textile Institute 105, no. 5 (2013): 547–52. http://dx.doi.org/10.1080/00405000.2013.827389.

Full text

APA, Harvard, Vancouver, ISO, and other styles

26

Lamine Baci, Zakaria Boumerzoug, and Claude Esnouf. "Study of texture and recrystallization in commercial pure copper wire with and without heat treatment." Journal of Applied Engineering Science & Technology 4, no. 2 (2018): 4. http://dx.doi.org/10.69717/jaest.v4.i2.75.

Full text

Abstract:

Wire drawing is a necessary operation for the production of small diameter electricalwires. During this process, the shaping of the material is performed by a plastic deformationmechanism. The change in the shape of the metal causes the plastic deformation of each grain ofthe crystalline metal. In this work, we have studied a commercial copper wire. In this study, opticalmicroscopy, electron microscopy transmission, Vickers hardness and X-ray diffraction were used.It is found that cold drawn wires are characterized by texture formation and dislocation cellrearrangement. Isothermal treatments w

APA, Harvard, Vancouver, ISO, and other styles

27

Suryadi, Aris. "DAMPAK HARMONISA TERHADAP PENINGKATAN TEMPERATUR TRANSFORMATOR DISTRIBUSI 1000 kVA DI POLITEKNIK ENJINERING INDORAMA." Simetris : Jurnal Teknik Mesin, Elektro dan Ilmu Komputer 8, no. 2 (2017): 421. http://dx.doi.org/10.24176/simet.v8i2.1187.

Full text

Abstract:

Transformator distribusi memiliki peran penting dalam mendistribusikan tenaga listrik sehingga peran transformator ini untuk beroperasi dengan baik harus dalam kondisi stabil. Salah satu kondisi yang mengganggu beroperasinya adalah gangguan harmonisa yang terjadi pada sistem distribusi tenaga listrik akibat terjadinya distorsi gelombang arus dan tegangan.Kandungan harmonisa yang tinggi pada jaringan sistem tenaga listrik akan menyebabkan transformator distribusi mengalami temperatur berlebih dan apabila tidak segera ditangani maka usia pengoperasian transformator lebih singkat.Salah satu peran

APA, Harvard, Vancouver, ISO, and other styles

28

Liu, Qingsheng, Yuqi Zhou, Ying Shen, et al. "Morphology, Structure, and Properties of Conductive Polylactide Fibers Prepared Using Polyvinyl Acetate and Multiwalled Carbon Nanotubes." Coatings 9, no. 10 (2019): 651. http://dx.doi.org/10.3390/coatings9100651.

Full text

Abstract:

Two kinds of conductive polylactide fibers—polylactide pre-oriented yarns (PLA-POY) and PLA-drawn textured yarns (PLA-DTY) are prepared by coating method using ethyl acetate as solvent, multiwalled carbon nanotubes (MWCNTs) as conductive filler, and polyvinyl acetate (PVAc) as dispersing agent and coating agent. The PLA fibers are characterized by scanning electron microscope (SEM), Fourier-transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), resistance meter, and tensile test. The results show that PLA-POY and PLA-DTY have been coated successfully by PVAc and MWCNT

APA, Harvard, Vancouver, ISO, and other styles

29

Irwanto, Riandi. "Analisa Harmonisa Pada Transformator 3 Fasa." JURNAL PERSEGI BULAT 1, no. 1 (2022): 7–12. http://dx.doi.org/10.36490/jurnalpersegibulat.v1i1.248.

Full text

Abstract:

Gangguan harmonisa yang terjadi pada sistem distribusi tenaga listrik akibat terjadinya distorsi gelombang arus dan tegangan. Distorsi gelombang arus dan tegangan ini disebabkan adanya pembentukan gelombang-gelombang dengan frekuensi kelipatan bulat dari frekuensi fundamentalnya. Gelombang-gelombang ini kemudian menumpang pada gelombang aslinya sehingga terbentuk gelombang cacat yang merupakan jumlah antara gelombang murni sesaat dengan gelombang harmonik. Keberadaan beban non-linier yang terdapat pada jaringan di Gedung A sebagai sebagian penyumbang harmonisa yang terjadi diantaranya electron

APA, Harvard, Vancouver, ISO, and other styles

30

Suryadi, Aris. "STUDI HARMONISA ARUS DAN TEGANGAN LISTRIK PADA KAMPUS POLITEKNIK ENJINERING INDORAMA." SINERGI 20, no. 3 (2016): 213. http://dx.doi.org/10.22441/sinergi.2016.3.007.

Full text

Abstract:

Gangguan harmonisa yang terjadi pada sistem distribusi tenaga listrik akibat terjadinya distorsi gelombang arus dan tegangan. Distorsi gelombang arus dan tegangan ini disebabkan adanya pembentukan gelombang-gelombang dengan frekuensi kelipatan bulat dari frekuensi fundamentalnya. Gelombang-gelombang ini kemudian menumpang pada gelombang aslinya sehingga terbentuk gelombang cacat yang merupakan jumlah antara gelombang murni sesaat dengan gelombang harmonik. Keberadaan beban non-linier yang terdapat pada Kampus Politeknik Enjinering Indorama sebagai sebagian penyumbang harmonisa yang terjadi dia

APA, Harvard, Vancouver, ISO, and other styles

31

Wang, Lili, Bobo Zhou, Yuliu Du, et al. "Guanidine Derivatives Leverage the Antibacterial Performance of Bio-Based Polyamide PA56 Fibres." Polymers 16, no. 19 (2024): 2707. http://dx.doi.org/10.3390/polym16192707.

Full text

Abstract:

Bacterial damage has significantly impacted humanity, prompting the control of harmful microorganisms and infectious diseases. In this study, antibacterial bio-based PA56 fibres were prepared with high-speed spinning using ethylene-methyl acrylate-glycidyl methacrylate terpolymer (EMA) as the compatibiliser and polypentamethylene guanidine sulphate (PPGS) as the antibacterial agent. The effects of PPGS content on the properties of PA56 draw-textured yarns (DTYs) were investigated. The compatibility between PPGS and PA greatly improved with EMA incorporation. Compared with PA56 fibres, the elon

APA, Harvard, Vancouver, ISO, and other styles

32

Gadana, Damte Balcha, Parshotam Datt Sharma, and Dereje Tsegaye Selfeko. "Effect of Soil Management Practices and Slope on Soil Fertility of Cultivated Lands in Mawula Watershed, Loma District, Southern Ethiopia." Advances in Agriculture 2020 (September 1, 2020): 1–13. http://dx.doi.org/10.1155/2020/8866230.

Full text

Abstract:

Soil degradation is a serious problem challenging food security in Ethiopia. To halt degradation and restore impoverished soils, the government has initiated soil management practices in the affected areas. Still, there is little information on the impact of these practices in terms of improvement in soil fertility of cultivated lands under different soil and climatic conditions. Accordingly, the study was carried out to study the effect of soil management practices, viz, soil bund (SB), application of farm yard manure (FYM), soil bund integrated with FYM (SBFYM), and vis-a-vis no management p

APA, Harvard, Vancouver, ISO, and other styles

33

Maity, Subhankar, Bibekananda Basu, and Abhishek Mishra. "Comparative Performance of Textured Yarn Drawn through Apron and Godet in Draw Texturing Machine." Tekstilec, March 29, 2024, 56–67. http://dx.doi.org/10.14502/tekstilec.67.2024005.

Full text

Abstract:

Over the past 20 years, in filament draw texturing, very few developments and innovations have been introduced into production machineries. The growing demand for energy efficiency, faster production rates and greater production flexibility have prompted our investigation into non-traditional approaches to improve yarn control during the texturing. Instead of aprons, small individually driven godets are a solution for high-speed manufacturing, yarn control and energy saving. The drawing godets, where the yarn can be considered an elastic coupling element between two consecutive godets, pose a

APA, Harvard, Vancouver, ISO, and other styles

34

Wu, Mengru, Tong Yang, Chaoyu Chen, Zhijia Dong, and Pibo Ma. "Design and fabrication of auxetic weft-knitted fabric with foldable and rotating rectangular structures." Textile Research Journal, May 29, 2025. https://doi.org/10.1177/00405175251323182.

Full text

Abstract:

Based on the loop structure characteristics of weft-knitted folded auxetic fabrics, a new small-course knitting pattern was designed using a combination of face loops and back loops. Fully drawn polyester yarn, draw-textured nylon yarn, and nylon–spandex covered yarn were selected for fabric manufacture using a flat knitting machine. By designing four different arrangements of elastic and inelastic yarns along the crosswise direction and conducting Poisson’s ratio tensile tests, a theoretical mechanical rigid rotation model between horizontal and vertical loops was constructed, based on the sp

APA, Harvard, Vancouver, ISO, and other styles

35

Wickramasinghe, Ganemulle Lekamalage Dharmasri, and Peter William Foster. "Investigation of the influence of effect-yarn draw and effect-yarn overfeed on texturing performance: comparison between air-jet and steam-jet textured yarn." Fashion and Textiles 1, no. 1 (2014). http://dx.doi.org/10.1186/s40691-014-0005-6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Zare, Abolfazl. "Sericin eco-friendly biomaterial as a spin finish in drawn textured PET yarn production." Research Journal of Textile and Apparel, January 19, 2023. http://dx.doi.org/10.1108/rjta-07-2022-0086.

Full text

Abstract:

Purpose This paper aims to extracted sericin from the cocoons of Bombyx mori silkworms, and sericin powder was applied onto drawn textured polyethylene terephthalate (PET) yarns as a spin finish. The reactivity on the surface of PET yarns was analyzed through Fourier transform infrared spectrophotometry–attenuated total reflectance (FTIR-ATR) and dyeing with methylene blue as a reactive dye. Also, investigations were conducted on the effects of sericin, citrc acid (CA) (as a crosslinking agent), and sodium hypophosphite (as a catalyst) concentrations on some properties of false-twist textured

APA, Harvard, Vancouver, ISO, and other styles

37

Farahani, Ali, Arsalan Parvareh, Mostafa Keshavarz Moraveji, and Davood Soudbar. "Study on thermal and mechanical behaviors of polypropylene grade 552R/Cloisite 15A nanocomposites suitable for yarn applications." Polymers and Polymer Composites, March 24, 2021, 096739112110034. http://dx.doi.org/10.1177/09673911211003404.

Full text

Abstract:

The investigation of polypropylene (PP)/clay nanocomposites has received considerable scientific and technological attention during the last decades due to their good mechanical and barrier properties. In the present article, the effects of adding Cloisite15A (C15A) nanoclay in polypropylene (PP) were investigated. PP nanocomposites were prepared by a direct melt mixing method. For better dispersion of C15A, 30 wt% of nanoclay masterbatch was first prepared by melt mixing of PP matrix and acrylic acid grafted PP oligomer (PP- g-AA) in a compounder, before being used to produce nanocomposites w

APA, Harvard, Vancouver, ISO, and other styles

38

Foster, P. W., G. L. D. Wickramasinghe, and U. S. W. Gunasekara. "False-twist draw-texturing with water-jet twister/cooler and superheated steam heater: effect of steam temperature on textured yarn properties." Journal of The Textile Institute, February 8, 2021, 1–11. http://dx.doi.org/10.1080/00405000.2021.1883238.

Full text

APA, Harvard, Vancouver, ISO, and other styles

39

Ullah, Sultan, Zeenat Akhter, Syed Talha Ali Hamdani, and Giedrius Janusas. "Electromechanical properties of knitted structures for potential socks sensing systems." Journal of Engineered Fibers and Fabrics 19 (January 2024). http://dx.doi.org/10.1177/15589250241273950.

Full text

Abstract:

The use of knitted structure pressure sensors in wearable applications and health monitoring systems has attracted a great deal of attention. This study aims to assess the single jersey and double jersey knitted structures as well as the electromechanical characteristics of electrically conductive yarns (ECY). The knitted structures were made with two different types of electrically conductive yarn, including the (i) fully drawn yarn (FDY) and the (ii) drawn textured yarn (DTY). FDY had higher tensile strength than DTY in reference to their drawing and twisting processes. Based on the results

APA, Harvard, Vancouver, ISO, and other styles

40

Maity, Subhankar, Payal Prajapati, Prashant Vishnoi, and Bibekanada Basu. "Effect of stabilising overfeed of draw textured yarns on woven fabric properties." Journal of The Textile Institute, June 27, 2024, 1–9. http://dx.doi.org/10.1080/00405000.2024.2370547.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Basu, Bibekanada, and Subhankar Maity. "Effects of stabilising overfeed on the properties of draw textured polyester yarns." Journal of The Textile Institute, April 25, 2023, 1–6. http://dx.doi.org/10.1080/00405000.2023.2200301.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Sareminia, Saba, Zahra Ghayoumian, and Fatemeh Haghighat. "Developing a data-driven operational guide for the texturized yarn production process: data mining and intelligence approach." International Journal of Clothing Science and Technology, February 20, 2024. http://dx.doi.org/10.1108/ijcst-03-2023-0032.

Full text

Abstract:

PurposeThe textile industry holds immense significance in the economy of any nation, particularly in the production of synthetic yarn and fabrics. Consequently, the pursuit of acquiring high-quality products at a reduced cost has become a significant concern for countries. The primary objective of this research is to leverage data mining and data intelligence techniques to enhance and refine the production process of texturized yarn by developing an intelligent operating guide that enables the adjustment of production process parameters in the texturized yarn manufacturing process, based on th

APA, Harvard, Vancouver, ISO, and other styles

43

Collins, Rebecca Louise. "Sound, Space and Bodies: Building Relations in the Work of Invisible Flock and Atelier Bildraum." M/C Journal 20, no. 2 (2017). http://dx.doi.org/10.5204/mcj.1222.

Full text

Abstract:

IntroductionIn this article, I discuss the potential of sound to construct fictional spaces and build relations between bodies using two performance installations as case studies. The first is Invisible Flock’s 105+dB, a site-specific sound work which transports crowd recordings of a soccer match to alternative geographical locations. The second is Atelier Bildraum’s Bildraum, an installation performance using live photography, architectural models, and ambient sound. By writing through these two works, I question how sound builds relations between bodies and across space as well as questionin

APA, Harvard, Vancouver, ISO, and other styles

44

Wallace, Caroline Veronica. "Ghost-Stitching American Politics." M/C Journal 26, no. 6 (2023). http://dx.doi.org/10.5204/mcj.2935.

Full text

Abstract:

In the aftermath of Donald Trump’s election victory in 2016, feminist and online craft communities responded with a call to arms (or needles) aimed at resistance through collective action in thread, yarn, and textiles. One such project, Diana Weymar’s Tiny Pricks Project, records the incessant barrage of Trump’s media coverage: tweets, journalist reportage, and statements in stitched thread. Weymar started Tiny Pricks Project on 8 January 2018, stitching the 45th President’s bluster of a 6 January tweet, “I AM A VERY STABLE GENIUS”, in yellow thread across a field of tapestry flowers. Issuing

APA, Harvard, Vancouver, ISO, and other styles

45

Rose, Megan Catherine, Haruka Kurebayashi, and Rei Saionji. "Kawaii Affective Assemblages." M/C Journal 25, no. 4 (2022). http://dx.doi.org/10.5204/mcj.2926.

Full text

Abstract:

Introduction The sensational appearance of kawaii fashion in Tokyo’s Harajuku neighborhood—full of freedom, fun, and frills— has captivated hearts and imaginations worldwide. A key motivational concept for this group is “kawaii” which is commonly translated as “cute” and can also be used to describe things that are “beautiful”, “funny”, “pretty”, “wonderful”, “great”, “interesting”, and “kind” (Yamane 228; Yomota 73; Dale 320). Representations in media such as the styling of Harajuku street model and J-pop star Kyary Pamyu Pamyu, directed by Sebastian Masuda, have helped bring this fashion to

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!