To see the other types of publications on this topic, follow the link: Drawing program.

Journal articles on the topic 'Drawing program'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Drawing program.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

IWAMATSU, Akira. "Drawing Program for Stress Trajectories." Geoinformatics 2, no. 4 (1991): 373–78. http://dx.doi.org/10.6010/geoinformatics1990.2.4_373.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Massire, C., C. Gaspin, and E. Westhof. "DRAWNA: A program for drawing schematic views of nucleic acids." Journal of Molecular Graphics 12, no. 3 (1994): 201–6. http://dx.doi.org/10.1016/0263-7855(94)80088-x.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Miyata, Yuichiro, and Makoto Kimura. "Convenient program for drawing geologic columns." Journal of the Sedimentological Society of Japan 47, no. 47 (1998): 107–11. http://dx.doi.org/10.4096/jssj1995.47.107.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Taylor, Philip. "A program for drawing evolutionary trees." Bioinformatics 4, no. 4 (1988): 441–43. http://dx.doi.org/10.1093/bioinformatics/4.4.441.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Reddy, P. K., and R. Bakyalakshmi. "Contour Drawing Program for Antenna Pattern." IETE Technical Review 10, no. 3 (1993): 235–42. http://dx.doi.org/10.1080/02564602.1993.11437331.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Strom, Charles M. "Cyrillic 2 program for pedigree drawing." Journal of Assisted Reproduction and Genetics 13, no. 7 (1996): 611–12. http://dx.doi.org/10.1007/bf02066619.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Binyamin, Binyamin, Muhammad Noor Asnan, Bagas Bayu Prasetyo, and Daniel Flawijaya Ledau. "Program Pelatihan Gambar Teknik Menggunakan Aplikasi AutoCAD di SMK Muhammadiyah 3 Samarinda." Jurnal Pesut : Pengabdian untuk Kesejahteraan Umat 2, no. 1 (2020): 52–61. http://dx.doi.org/10.30650/jp.v2i1.442.

Full text
Abstract:
Vocational students need some skills that will be used when students finish their studies at school. One of the expected skills is the ability to draw using the AutoCAD program. Where the final ability is expected of the students will be able to create engineering drawings in the form of 2-D models. The purpose of the training program is to develop and improve the technical drawing skills of the XII class students in using the AutoCAD program. Therefore, the students of class XII SMK have the ability to draw machine components and other engineering drawings in 2-D format. The method used in th
APA, Harvard, Vancouver, ISO, and other styles
8

Daraj, Assad Khudair, and Ahmed Hameed Shakir. "Use Google Sketch up As an Illustration in Industrial Drawing." JOURNAL OF UNIVERSITY OF BABYLON for Pure and Applied Sciences 26, no. 8 (2018): 137–43. http://dx.doi.org/10.29196/jubpas.v26i8.1679.

Full text
Abstract:
When it comes to drawing 3D shapes, we do not get any easier than the Google Sketch Up program. The most important part of 3D drawing, especially in the field of architecture, is the ease of using the program, the ability to turn the idea into virtual reality, the Google sketch program Up, provides a user-friendly service that is not required for a powerful computer, and we all know that AutoCAD is one of the most powerful 3D drawing programs (if not the most powerful) but the difficulty of using it and the time it takes to learn has led most engineers to resort to the easiest program. indispe
APA, Harvard, Vancouver, ISO, and other styles
9

IZUMI, Fujio. "ATOMS, a Program for Drawing Crystal Structures." Nihon Kessho Gakkaishi 34, no. 1 (1992): 41–43. http://dx.doi.org/10.5940/jcrsj.34.41.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Perotti, G., E. Maggiorano, F. Spirito, S. Tornincasa, and R. Levi. "A Calculation Program for Deep-Drawing Forms." CIRP Annals 34, no. 1 (1985): 237–40. http://dx.doi.org/10.1016/s0007-8506(07)61763-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
11

Filiatrault, Johanne, Manon Parisien, Sophie Laforest, et al. "Implementing a Community-Based Falls-Prevention Program: From Drawing Board to Reality." Canadian Journal on Aging / La Revue canadienne du vieillissement 26, no. 3 (2007): 213–25. http://dx.doi.org/10.3138/cja.26.3.213.

Full text
Abstract:
ABSTRACTSeveral studies have demonstrated the efficacy of falls-prevention programs designed for community-dwelling seniors using randomized designs. However, little is known about the feasibility of implementing these programs under natural conditions and about the success of these programs when delivered under such conditions. The objectives of this paper are to (a) describe a multifactorial falls-prevention program (called Stand Up!) designed for independent community-dwelling seniors and (b) present the results of an analysis of the practicability of implementing this program in community-
APA, Harvard, Vancouver, ISO, and other styles
12

Krzysiak, Zbigniew, Grzegorz Bartnik, Anna Pecyna, and Waldemar Samociuk. "Technical documentation management with the use of the Access program." Mechanik 91, no. 7 (2018): 552–54. http://dx.doi.org/10.17814/mechanik.2018.7.81.

Full text
Abstract:
The paper presents the concept of using the capabilities of Microsoft Access to manage and archive technical documentation made in the CAD systems (e.g. AutoCAD). An original application was created in the Access program for the design documentation of a rotary cleaning device prototype. It has been shown that such an application can be used to organize and view drawings without the need to use expensive commercial programs to manage drawing files.
APA, Harvard, Vancouver, ISO, and other styles
13

Kim, Inhan, Yongha Lee, Choong-Hee Han, Gutaek Kim, and Jungsik Choi. "Validation of Support for Creation of License Drawings Using Application for openBIM-Based Automatic Generation of 2D Drawings." Applied Sciences 10, no. 18 (2020): 6470. http://dx.doi.org/10.3390/app10186470.

Full text
Abstract:
In the preparation of drawings and documents required for a licensing process, the main problem is the duplication of work in creating design drawings and Building Information Modeling (BIM) models. To overcome this problem, BIM authoring tools provide a drawing generation function. However, it is difficult to use it in a construction project involving multiple actors using different authoring tools for each design actor. Owing to these problems, the drawing generation program, which is based the on the industry foundation classes (IFC) concept is not limited to the authoring tools used in the
APA, Harvard, Vancouver, ISO, and other styles
14

Priestle, J. P. "RIBBON: a stereo cartoon drawing program for proteins." Journal of Applied Crystallography 21, no. 5 (1988): 572–76. http://dx.doi.org/10.1107/s0021889888005746.

Full text
APA, Harvard, Vancouver, ISO, and other styles
15

Vanchieri, C. "Drawing Medical Students into Research: Hughes Program Expands." JNCI Journal of the National Cancer Institute 80, no. 17 (1988): 1358–60. http://dx.doi.org/10.1093/jnci/80.17.1358.

Full text
APA, Harvard, Vancouver, ISO, and other styles
16

Liu, Jingdong, and John S. Parkinson. "A Macintosh program for drawing circular plasmid maps." Bioinformatics 5, no. 3 (1989): 237–38. http://dx.doi.org/10.1093/bioinformatics/5.3.237.

Full text
APA, Harvard, Vancouver, ISO, and other styles
17

Romera, M., G. Pastor, A. B. Orue, A. Martin, M. F. Danca, and F. Montoya. "A Method to Solve the Limitations in Drawing External Rays of the Mandelbrot Set." Mathematical Problems in Engineering 2013 (2013): 1–9. http://dx.doi.org/10.1155/2013/105283.

Full text
Abstract:
The external rays of the Mandelbrot set are a valuable graphic tool in order to study this set. They are drawn using computer programs starting from the Böttcher coordinate. However, the drawing of an external ray cannot be completed because it reaches a point from which the drawing tool cannot continue drawing. This point is influenced by the resolution of the standard for floating-point computation used by the drawing program. The IEEE 754 Standard for Floating-Point Arithmetic is the most widely used standard for floating-point computation, and we analyze the possibilities of the quadruple
APA, Harvard, Vancouver, ISO, and other styles
18

Toribio, Jesús, Francisco-Javier Ayaso, and Rocío Rodríguez. "Drawing-Induced Evolution of Inclusions in Cold-Drawn Pearlitic Steel." Metals 11, no. 8 (2021): 1272. http://dx.doi.org/10.3390/met11081272.

Full text
Abstract:
This article focuses on the analysis of the evolution of inclusions present in eutectoid pearlitic steel subjected to a real cold drawing process. To this end, wires belonging to different stages of the manufacture chain were studied, starting from an initial hot rolled bar (not cold drawn at all). In addition to the information obtained through visual inspection, a quantitative analysis of the microdefects generated by these inclusions was carried out. The analysis was performed using materialographic techniques, scanning electron microscopy (SEM) and the image analysis program (AnaliSYS 3.1®
APA, Harvard, Vancouver, ISO, and other styles
19

Broering, Camilla Volpato, and Maria Aparecida Crepaldi. "Psychological preparation for surgery: verbal report of the drawing-story." Estudos de Psicologia (Campinas) 30, no. 3 (2013): 367–74. http://dx.doi.org/10.1590/s0103-166x2013000300006.

Full text
Abstract:
Communicating with hospitalized children for invasive procedures usually takes place in a veiled and indirect way. This present study evaluated children's verbal report on the drawings that they produced in situations of the psychological preparation for surgery. The research was conducted with 30 participants divided into two preparation groups (verbal information and toys), users of a children's hospital who used the technique of drawing-story. There were three distinct stages: a) the child receives instruction on the design history and hears a story the day before the surgery; b) the psycho
APA, Harvard, Vancouver, ISO, and other styles
20

Solovieva, Yulia, and Luis Quintanar. "Stages for Introduction of Drawing Actions in Pre-School Age." Journal of Education and Culture Studies 1, no. 1 (2017): 12. http://dx.doi.org/10.22158/jecs.v1n1p12.

Full text
Abstract:
<p><em>The process of learning and achievements at school depends on the types of activities selected at pre-school level. Unfortunately, it is often to find out that introduction of writing and reading is among the most common activities in pre-school institutions all over the world. According to historical and cultural conception of development, artistic and creative activities are useful and helpful at pre-school age. The goal of the article is to show the efficiency of original program for initial introduction of drawing actions at pre-school age. The original program for gradu
APA, Harvard, Vancouver, ISO, and other styles
21

Wilkins, James R. "Results from Use of an Integrated Schedule for Drawing Development and Equipment Procurement." Journal of Ship Production 6, no. 03 (1990): 180–90. http://dx.doi.org/10.5957/jsp.1990.6.3.180.

Full text
Abstract:
As part of an SP-4 project, a computer program was developed to produce integrated schedules for drawing development of drawings and equipment procurement. The program also can be used either to develop a schedule for the fabrication and assembly stages of the construction process or to receive data from an existing construction schedule. In either case, the construction data are used to ensure that drawings are produced and equipment is purchased in time to support production planning. The program uses a commonly available database program, is suitable for use on a minicomputer, and will allo
APA, Harvard, Vancouver, ISO, and other styles
22

Hamed, Najat. "An Automatic Drawing Spur Gears Based on AutoCAD Program." Tikrit Journal of Engineering Sciences 28, no. 1 (2021): 64–70. http://dx.doi.org/10.25130/tjes.28.1.07.

Full text
Abstract:
In this research, a computer-aided drawing system of spur gear was developed. An auto LISP programming language embedded within the AutoCAD design package was used to develop a new program to create a 3D model of a spur gear in two main stages. In the first stage, the developed program of spur gear allows automatic 2D spur gear drawing generation using the technique that depends on the half tooth thickness at the pitch diameter. In the second stage, inner profiles of a 2D spur gear views are used to create a 3D model of a spur gear. The developed program helpful for the user in drawing the spu
APA, Harvard, Vancouver, ISO, and other styles
23

Sawyer, Jeremy E., and Thalia Goldstein. "Can Guided Play and Storybook Reading Promote Children’s Drawing Development?" Empirical Studies of the Arts 37, no. 1 (2018): 32–59. http://dx.doi.org/10.1177/0276237418777946.

Full text
Abstract:
Children’s drawings are implicated in their emotional, cognitive, artistic, and semiotic development, raising the question of how early educators may best facilitate drawing development. This study compared three activities to determine their relative efficacy in promoting children’s drawing. Seventy-seven preschoolers from a Head Start program were randomly assigned to one of three conditions: storybook reading, block building, or dramatic pretend play games (DPPG). Interventions were conducted over 8 weeks, and children’s free drawings during each session were rated on five dimensions: creat
APA, Harvard, Vancouver, ISO, and other styles
24

Chen, Yan, Yi Jun Xiong, and Rong Zhang. "Drawing Threaded Programs with AutoCAD Secondary Development." Applied Mechanics and Materials 539 (July 2014): 59–61. http://dx.doi.org/10.4028/www.scientific.net/amm.539.59.

Full text
Abstract:
AutoCAD is a drawing software is widely used in various industries. AutoLISP language embedded in AutoCAD software is one of many AutoCAD development tools and used very widely in the world. In this paper, AutoLISP will be used to develop a new program for drawing thread. We will draw a variety of internal and external thread and add center sign rapidly and accurately. New source program will be provided and is very meaningful and useful to the user.
APA, Harvard, Vancouver, ISO, and other styles
25

Jang, Ji-Hyeon, and Shin-Dong Lee. "Encoding program of Childhood drawing for activating working memory." Soonchunhyang Exceptional Children Institute 6, no. 2 (2019): 21–39. http://dx.doi.org/10.33125/kdps.2019.6.2.2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
26

Maimó, J., J. A. García-Raso, J. M. Estela, and V. Cerdá. "Diagram, a drawing program for logarithmic concentration/pH plots." Analytica Chimica Acta 184 (1986): 291–93. http://dx.doi.org/10.1016/s0003-2670(00)86494-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
27

Hidayati, Wildani. "EVALUATION OF MEMORIES LEARNING PROGRAM AL-QUR'AN AS A LOCAL CURRICULUM AT MTs.N 7 MODUR JAKARTA TIMUR (Evaluative Research Using CSE-UCLA Models)." JISAE: JOURNAL OF INDONESIAN STUDENT ASSESMENT AND EVALUATION 4, no. 2 (2019): 1–12. http://dx.doi.org/10.21009/jisae.042.01.

Full text
Abstract:
Abstract
 This study aims to find out how effective the implementation of Qur'anic learning in MTs.N 7 East Jakarta models. This study is classified as evaluative research using the CSE-UCLA model consisting of assessment, program planning, implementation programs, programs improvement and program certification. The subject of this study consisted of: school principal, mentor, student and student guardian. Data collection methods are carried out with questionnaires, observation, interviews, and documentation. Data analysis techniques in this study are the Miles and Huburmen models. The ac
APA, Harvard, Vancouver, ISO, and other styles
28

Zhuravlova, N. "Sketch in the educational program for the draving of the National Academy of Visual Arts and Architecture: Methodical and technical specifics." Research and methodological works of the National Academy of Visual Arts and Architecture, no. 27 (February 27, 2019): 105–10. http://dx.doi.org/10.33838/naoma.27.2018.105-110.

Full text
Abstract:
The article reveals the methodical principles of teaching the short-term drawing, the relationship between educational and creative aspects, the differences between, and the advantages of a long-term drawing and a sketch, and also substantiates reasons of its compulsory introduction to the program at the Department of Drawing of the National Academy of Visual Arts and Architecture. It elucidates the problem of requirements and implementation of short-term drawing in the context of development students' ability to use graphic expressiveness and plastic characteristics of a drawing. Finally, it
APA, Harvard, Vancouver, ISO, and other styles
29

Харах, Matvey Kharakh, Козлова, et al. "Parameterization Theory Elements and Parametric Drawings in "KOMPAS-Graphic"." Geometry & Graphics 5, no. 1 (2017): 64–72. http://dx.doi.org/10.12737/25125.

Full text
Abstract:
Some elements of geometric objects’ parameterization theory are considered in this paper. An analysis of this theory development by leading Soviet scientists has been presented. It is known that figure’s parameters are determined by adding shape parameters with location parameters. In the drawing these parameters are expressed as dimensions. Relations between figures are determined or by their mutual affiliation, or by perpendicularity, or by their touch. These ratios allow reduce dimensions number on a drawing. The link of the parameterization theory with creation of parametric drawings has b
APA, Harvard, Vancouver, ISO, and other styles
30

Ruki, Ulli Aulia, and Budi Setiawan. "Tahapan Teknik Menggambar Ragam Hias Nusantara dengan Program Komputer Autocad." Humaniora 4, no. 2 (2013): 933. http://dx.doi.org/10.21512/humaniora.v4i2.3534.

Full text
Abstract:
Nowadays, technology has developed in many different disciplines. One of the technologies that have been used in design interior is AutoCAD software used in technical drawing. This AutoCAD software has been well-known by drafters. Advantages of this software are small period time of working, drawing with precisely measurement; and it is environmental friendly because it uses digital data that can reduce paper use. Drawing decorative ornament is one of difficulties that have been avoided by students to draw. Therefore the purpose of this article is to give information about steps of drawing dec
APA, Harvard, Vancouver, ISO, and other styles
31

HIRANO, Masahiro. "A program for drawing crystal structures using a personal computer." Journal of the Mineralogical Society of Japan 19, no. 1 (1989): 1–7. http://dx.doi.org/10.2465/gkk1952.19.1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
32

Zou, Qing Hua, and Li Zhu. "Program Drawing the Dynamic Phase Diagrams of MnCrNiMo Type Steels." Applied Mechanics and Materials 692 (November 2014): 444–49. http://dx.doi.org/10.4028/www.scientific.net/amm.692.444.

Full text
Abstract:
The dynamic phase diagrams of MnCrNiMo type steel have been established and discussed, which can be applied in the practical production, and it analyzes the corresponding structures and chemical compositions. The computer calculation and drawing programs of non-equilibrium phase diagram of MnCrNiMo type steel. having been designed
APA, Harvard, Vancouver, ISO, and other styles
33

Yu, Liu, Zhang Lei, Huang Zhengjun, and Zhang Dong. "Development of Drawing Program of Borehole Histogram Based on Delphi." IOP Conference Series: Earth and Environmental Science 330 (November 8, 2019): 052010. http://dx.doi.org/10.1088/1755-1315/330/5/052010.

Full text
APA, Harvard, Vancouver, ISO, and other styles
34

Kurniawati, Mega, Satoto E. Nayono, Asnul Dahar Minghat, Fahmi Rizal, ., and . "Student’s Perception of Building Drawing Techniques about Industrial Internship Program." International Journal of Engineering & Technology 7, no. 4.34 (2018): 458. http://dx.doi.org/10.14419/ijet.v7i4.34.26912.

Full text
Abstract:
This study originated from the absence of career data from graduates of the Building Engineering Education Study Program at Padang State University. The purpose of this study is to describe and evaluate the implementation of the internship. Data collection techniques using questionnaires with Likert scale and data analysis techniques using descriptive analysis. The population in this study were students of the Building Image Engineering study program. The sampling technique uses total sampling with a sample of 25 respondents. The results of the study with indicators of student perceptions of t
APA, Harvard, Vancouver, ISO, and other styles
35

Li, Rui Fang, and Xiao Hong Yu. "Research on General Statistical Chart Drawing Based on .Net." Advanced Materials Research 902 (February 2014): 321–23. http://dx.doi.org/10.4028/www.scientific.net/amr.902.321.

Full text
Abstract:
By the need of graphical analyzing and sharing about statistical data, drawing of statistic chart based on .net is studied. In all kinds of methods, the chart based on OWC component is widely favored by the developers, and it mainly focused on the implementation steps. But in most of the researches, data is directly bound with the program, and it reduces the reusability of the program, causing a great deal of redundancy. Therefore, general class of statistical chart based on OWC is developed based on .Net, which implements the separation of data and drawing. In addition, by using the AJAX tech
APA, Harvard, Vancouver, ISO, and other styles
36

Antara, Nengah Ludra. "Organic Waste Chopper Tool Design Using Autodesk Inventor 2015 Software." Logic : Jurnal Rancang Bangun dan Teknologi 19, no. 2 (2019): 68. http://dx.doi.org/10.31940/logic.v19i2.1379.

Full text
Abstract:
In the program of mechanical engineering, the software used to draw is Autodesk Inventor. Autodesk inventor is a CAD program in the program of engineering that is applied to the design of mechanics in 3D. In designing a tool, of course, it is preceded by a planned design concept. In making a design a tool requires a process or steps for making the design. These steps include the size, dimensions, and materials used in making organic waste chopper tool. The drawing process uses the 2015 Autodesk Inventor program, the first is the making of sketches, components on the machine, followed by assemb
APA, Harvard, Vancouver, ISO, and other styles
37

Abdel-Magied, R. K., and H. M. A. Hussein. "A CAPP/CAD for Sheet Metal Deep Drawing." Applied Mechanics and Materials 619 (August 2014): 105–9. http://dx.doi.org/10.4028/www.scientific.net/amm.619.105.

Full text
Abstract:
The aim of this work is to develop an integrated system for facilitating the process of designing the drawing dies and their component. The developed system is based on the integration between Computer Aided Process Planning in Sheet Metal Drawn parts “CAPP”, and the Computer Aided Design in Deep Drawing Die components “CAD”. Both modules are coded using Visual Basic program and joined with AutoCAD. The CAPP module made to report the drawing load and to plot the shape of the drawn shell in each stage of the Axis-Symmetric Deep Drawing process. Based on the reported shell geometry, the dimensio
APA, Harvard, Vancouver, ISO, and other styles
38

Yamanoue, Takashi, Kentaro Oda, and Koichi Shimozono. "A Simple Application Program Interface for Saving Java Program Data on a Wiki." Advances in Software Engineering 2012 (April 3, 2012): 1–9. http://dx.doi.org/10.1155/2012/981783.

Full text
Abstract:
A simple application program interface (API) for Java programs running on a wiki is implemented experimentally. A Java program with the API can be running on a wiki, and the Java program can save its data on the wiki. The Java program consists of PukiWiki, which is a popular wiki in Japan, and a plug-in, which starts up Java programs and classes of Java. A Java applet with default access privilege cannot save its data at a local host. We have constructed an API of applets for easy and unified data input and output at a remote host. We also combined the proposed API and the wiki system by intro
APA, Harvard, Vancouver, ISO, and other styles
39

Li, X. W. "Computer-Aided Design for Stabilization Ponds." Water Science and Technology 26, no. 9-11 (1992): 2425–28. http://dx.doi.org/10.2166/wst.1992.0753.

Full text
Abstract:
It is urgently necessary to develop practical programs for different purposes in the field of wastewater treatment. Now the design programs for grit chambers, anaerobic ponds, facultative ponds, aerobic ponds, aerated ponds and polishing ponds are being developed. Programs for automated plotting and man-machine interactive plotting are needed too. By using AutoCAD (Version 9.03 or 10.0), a secondary development of the softwares for engineering drawing of stabilization pond has been developed, which possesses the function of writing out explanatory notes. A program for writing out explanatory n
APA, Harvard, Vancouver, ISO, and other styles
40

Chang, Zhi Guo, Hui Zhu Yang, and Qi Lin Zhang. "Drawing and CNC Software System for Light Gage Steel Structure." Advanced Materials Research 328-330 (September 2011): 511–14. http://dx.doi.org/10.4028/www.scientific.net/amr.328-330.511.

Full text
Abstract:
The primary program development principles and techniques of detailed drawings and CNC programming based on three-dimensional solid model for light gage steel structure are discussed. Components of the structure with complex spatial relationships and construction details are shown directly, accurately and completely based on 3D solid model, and structure properties and design requirements are integrated into the intelligent model. Therefore, drawings and detailed drawings can be drawn and labeled automatically by projecting and hiding with the extracted geometric information of particular enti
APA, Harvard, Vancouver, ISO, and other styles
41

Wright, S. J., S. J. Packebush, and D. A. Mitta. "Software Interface Evaluation: Modeling of Human Error." Proceedings of the Human Factors and Ergonomics Society Annual Meeting 37, no. 5 (1993): 453–55. http://dx.doi.org/10.1177/154193129303700513.

Full text
Abstract:
The purpose of this study was to use a human error model to evaluate a commercially available Macintosh-based graphics application based upon the frequencies and types of mistakes occurring during users' performance of designated tasks. The occurrence of high frequencies of knowledge-based and rule-based mistakes during the learning of an interface element would indicate that the element requires evaluation and possible redesign. This study involved five participants, all of whom were students at Texas A&M University. The participants were experienced Macintosh users with no experience usi
APA, Harvard, Vancouver, ISO, and other styles
42

Zhang, Liang Dong, Ying Hua Liao, and Chun Hua Fu. "Development of Computer-Aided Design Module for Mechanical Products Based on AutoCAD." Advanced Materials Research 842 (November 2013): 691–94. http://dx.doi.org/10.4028/www.scientific.net/amr.842.691.

Full text
Abstract:
Based on the basic process of mechanical product design and a modular design idea, the module includes three parts, i.e. design calculation, computer-aided drawing and foundation database. The design calculation mainly includes the commonly used design calculation program in mechanical product design, and the computer-aided drawing mainly includes the parametric drawing programs about the drawing environment and the commonly used machine parts, the foundation database mainly stores the data related to the mechanical product design. Then a computer-aided design module for mechanical product wil
APA, Harvard, Vancouver, ISO, and other styles
43

Hahn, Ulrike. "Explaining more by drawing on less." Behavioral and Brain Sciences 32, no. 1 (2009): 90–91. http://dx.doi.org/10.1017/s0140525x09000351.

Full text
Abstract:
AbstractOne of the most striking features of “Bayesian rationality” is the detail with which behavior on logical reasoning tasks can now be predicted and explained. This detail is surprising, given the state of the field 10 to 15 years ago, and it has been brought about by a theoretical program that largely ignores consideration of cognitive processes, that is, any kind of internal behavior that generates overt responding. It seems that an increase in explanatory power can be achieved by restricting a psychological theory.
APA, Harvard, Vancouver, ISO, and other styles
44

Kucharska, Monika, Sylwia Wiewiórowska, Jacek Michalczyk, and Andrzej Gontarz. "The Influence of the Drawing Process on the Mechanical Properties of TRIP Steel Wires with 0.4% C Content." Materials 13, no. 24 (2020): 5769. http://dx.doi.org/10.3390/ma13245769.

Full text
Abstract:
In the work, the results of the research concerned with the TRIP (Transformation Induced Plasticity) steel wire drawing process in experimental and theoretical ways are shown. The wire drawing process tests on the experimental way were conducted in both laboratories as well as industrial conditions, with the use of two drawing speeds (1.6 and 6 m/s) and two drawing schemes (low and high single reductions). The mechanical properties of wires drawn with high drawing speed equal to 6 m/s showed higher values of mechanical properties for wires drawn with low single reductions than for wires drawn
APA, Harvard, Vancouver, ISO, and other styles
45

Karmelita, Courtney. "Fundamental Elements of Transition Program Design." Adult Learning 28, no. 4 (2017): 157–66. http://dx.doi.org/10.1177/1045159517718328.

Full text
Abstract:
Adult learners require supports and services to help them successfully transition into taking on the demands and expectations of college students. Transition programs have grown in popularity as a means to aid adult learners as they transition to higher education. Unfortunately, previous research on adult learner participation in transition programs is limited in its scope and depth. There is a need to understand how to develop transition programs to best support adult learners. Drawing on interviews and observation, this narrative study investigates program details about the funding structure
APA, Harvard, Vancouver, ISO, and other styles
46

Behrens, B. A. Prof, S. Koch, M. Pleßow, G. Wrobel, R. Scheffler, and D. Bauer. "Eine neue Modellierung von Tiefziehwerkzeugen*/A new modelling of deep drawing tools - From parameter-based 3D-CAD-Model to the new graphical language for deep drawing tools." wt Werkstattstechnik online 106, no. 10 (2016): 690–94. http://dx.doi.org/10.37544/1436-4980-2016-10-16.

Full text
Abstract:
Der Fachbeitrag konzentriert sich auf die parametergerechte 3D-CAD-Modellierung von Tiefziehwerkzeugen und deren Beschreibung in einer neuen grafischen Sprache. Die neu zu entwickelnde Modellierungssprache für die Domäne der Tiefziehwerkzeuge soll die Kommunikation zwischen Konstrukteur und CAD-Programm vereinfachen. Die Modellierung von CAD-Modellen für Tiefziehwerkzeuge wird damit flexibler und zeiteffizienter gestaltet.   This study focuses on parameter-based 3D CAD modelling of deep drawing tools as well as their description in a new graphical modelling language. The newly develop
APA, Harvard, Vancouver, ISO, and other styles
47

Zhang, De Bin, Yu Xiao Wu, and Xiao Ying Gu. "Research on the Key Technology of Realizing Roll Rapid Drawing System." Advanced Materials Research 655-657 (January 2013): 1706–9. http://dx.doi.org/10.4028/www.scientific.net/amr.655-657.1706.

Full text
Abstract:
This paper studied how to quickly draw the roll engineering drawing thorough ARX application program, introduced and analyzed the layer, linear, size tolerance Settings, and geometric tolerance Settings. On this basis, citing specific examples will be described, and listed the specific examples to explain. At last speaked on design idea and the development steps for roll rapid drawing system, completed the ARX applications of manufacturing circular tube roll. Those ARX application program loaded in the AutoCAD2002, automatically drawed mechanical drawing of roll by inputting characteristic val
APA, Harvard, Vancouver, ISO, and other styles
48

Pişkin, Mehmet Ali, and Bilgin Kaftanoğlu. "Computer Aided Modeling of Deep-Drawing." Key Engineering Materials 344 (July 2007): 341–48. http://dx.doi.org/10.4028/www.scientific.net/kem.344.341.

Full text
Abstract:
Deep-drawing operations are performed widely in industrial applications. It is very important for efficiency to achieve parts with no defects. In this work, a finite element method is developed to simulate deep-drawing operation including wrinkling. A four nodded five degree of freedom shell element is formulated. Isotropic elasto-plastic material model with Von Mises yield criterion is used. By using this shell element, the developed code can predict the bending behavior of workpiece besides membrane behavior. Simulations are carried out with four different element sizes. The thickness strain
APA, Harvard, Vancouver, ISO, and other styles
49

Yu, Jun, and Zhi Yi Hu. "Design and Simulation of Soccer Robots and Field Scenarios." Applied Mechanics and Materials 220-223 (November 2012): 1162–65. http://dx.doi.org/10.4028/www.scientific.net/amm.220-223.1162.

Full text
Abstract:
RoboCup is an international joint project to promote artificial intelligence, robotics and related fields. This paper presents a program that can draw and edit a drawing about soccer Robots and field scenarios. The program can load and save an image file, and draw 2D primitives in a painting area. These primitives can be set with different heights and tested by their compatibility with a new primitive. It also can undo/redo a drawing operation. There is a grid function to simplify the positioning of primitives. All the shapes in the drawing can be aligned appropriately. The result shows that t
APA, Harvard, Vancouver, ISO, and other styles
50

Yang, Hui Kang, Dean Zhao, Jin Liang Guo, Jun Zhang, and Bo Chen. "Research on Automatic Segmentation Methods of Multi-Beam Waterjet Cutting Process Drawings." Advanced Materials Research 314-316 (August 2011): 1571–75. http://dx.doi.org/10.4028/www.scientific.net/amr.314-316.1571.

Full text
Abstract:
Currently, some manual segmentation problems exist in multi-beam waterjet cutting process drawings, such as low efficiency, incomplete segmentation and so on. In order to solve the problems, this paper designs a set of criteria for multi-beam cutting process and proposes the method of partition-classification trim, then uses the secondary development tool which is embedded in AutoCAD to program three user-defined commands, and these commands can partition the drawing by region, classify and trim the entities in the cutting process drawing. Through inputting the three simple commands on the com
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!