Log in

Relevant bibliographies by topics / Drill cuttings / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Drill cuttings.

Dissertations / Theses on the topic 'Drill cuttings'

Author: Grafiati

Published: 4 June 2021

Last updated: 26 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'Drill cuttings.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Pereira, Igor S. M. "Microwave processing of oil contaminated drill cuttings." Thesis, University of Nottingham, 2013. http://eprints.nottingham.ac.uk/28515/.

Full text

Abstract:

Easily accessible oil reserves are currently decreasing, leading to an increase in more complex offshore deep-sea drilling programs, which require increasingly greater depths to be drilled. Such wells are commonly drilled using oil based muds, which leads to the production of drilled rock fragments, drill cuttings, which are contaminated with the base oil present in the mud. It is a legal requirement to reduce oil content to below 1 wt% in order to dispose of these drill cuttings in the North Sea and microwave processing is suggested as a feasible method of achieving the desired oil removal. H

APA, Harvard, Vancouver, ISO, and other styles

2

Junin, Radzuan bin. "Downhole disposal of oil-rig drill cuttings." Thesis, University of Nottingham, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.339712.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Shang, Hui. "Microwave treatment of oil contaminated drill cuttings." Thesis, University of Nottingham, 2006. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.431863.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Turner, Katharine Patricia. "Bioremediation of drill cuttings from oil based muds." Thesis, University of Nottingham, 2002. http://eprints.nottingham.ac.uk/14192/.

Full text

Abstract:

Analytical techniques applicable to the assay and remediation of cutting/mud matrices have been developed, utilising soxhlet extraction with dichloromethane and a drying agent followed by analysis using Gas Chromatography (FID). Calibration curves of oil content were produced for Novatec and Versaplus coated cuttings that were also sized by wet and dry sieving techniques, demonstrating their variable nature. The oil in each size fraction was assessed and showed that the finer fractions preferentially adsorbed the oil. Bacteria were isolated from the cuttings, muds and the pure oils to see if a

APA, Harvard, Vancouver, ISO, and other styles

5

Al-Ansary, Marwa Saad Moussa. "Stabilisation/solidification and pelletisation of petroleum drill cuttings." Thesis, University of Cambridge, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.613126.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Huddleston, Adam Timothy. "The quantification of the degradation of drill hole cuttings /." Title page, abstract and contents only, 2000. http://web4.library.adelaide.edu.au/theses/09SB/09sbh884.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Becker, Thomas Edward. "Correlations for drill-cuttings transport in directional-well drilling /." Access abstract and link to full text, 1987. http://0-wwwlib.umi.com.library.utulsa.edu/dissertations/fullcit/8712608.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Carles, Linda. "Physical characteristics and aquatic settlement properties of offshore drill-cuttings." Thesis, Robert Gordon University, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.302701.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Davis, Davidson Dimabo. "Bioremediation of hydrocarbon contaminated soils and drill cuttings using composting with agricultural wastes." Thesis, University of Newcastle upon Tyne, 2016. http://hdl.handle.net/10443/3414.

Full text

Abstract:

A compost-bioremediation approach was adopted in this study to explore more sustainable and economically viable methods of degrading pollutant hydrocarbons in oil-field drill cuttings and coal tar impacted soils (CTIS). The compost amendments used were agricultural waste products including grass cuttings, spent mushroom compost and straw. Laboratory-scale compost experiments were conducted to test the performance of different compost blends comprised of each contaminated medium and organic amendments in different mix ratios for 53 days. The compost mix type which produced the greatest reductio

APA, Harvard, Vancouver, ISO, and other styles

10

Bunker, Adrian John. "The impact of the oil industry on subtidal meiobenthos." Thesis, Heriot-Watt University, 1999. http://hdl.handle.net/10399/1269.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Ascott, James Richard. "Assessment of the bioremediation potential of alkane constituents of drill cuttings by extreme halophiles." Thesis, University of Exeter, 2006. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.439871.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Ayati, Bamdad. "A novel use for oil-contaminated drill cuttings in the manufacture of lightweight aggregate." Thesis, University of East London, 2018. http://roar.uel.ac.uk/7716/.

Full text

Abstract:

Contaminated waste drill cuttings produced from drilling activities in the North Sea is currently transported onshore and landfilled at high costs, as there is no existing option for alternative and viable recycling. The aim of this research was therefore to investigate the technical feasibility of transforming this waste into an inert, porous, ceramic material to potentially be utilised as lightweight aggregate (LWA). In this project, three samples of waste drill cuttings were obtained and characterised for chemical compositions, mineralogy, thermal behaviour and contaminant leaching. To manu

APA, Harvard, Vancouver, ISO, and other styles

13

Mohammed, Babagana. "Beneficial use of treated oil drill cuttings from Nigeria in sandcrete blocks and geopolymer construction products." Thesis, Imperial College London, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.516178.

Full text

APA, Harvard, Vancouver, ISO, and other styles

14

Brown, Curtis A. "Gamma Spectroscopic Method to Assess Radium Concentrations in Drill Cuttings and Water Produced by Hydraulic Fracturing." The Ohio State University, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=osu1457700818.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Artz, Rebekka Ruth Elisabeth. "An integrated assessment of natural attenuation of hydrocarbons in drill cuttings on the North Sea seabed." Thesis, University of Aberdeen, 2002. http://digitool.abdn.ac.uk/R?func=search-advanced-go&find_code1=WSN&request1=AAIU149189.

Full text

Abstract:

Oil production in the North Sea sector pre-1990 used predominantly oil-based drilling muds. The drill cuttings still contained significant amounts of muds and associated hydrocarbons despite cleaning prior to disposal onto the seabed. The cuttings accumulating on the seabed caused physical smothering and toxic effects of the hydrocarbons or other constituents of the muds. Although decreases in hydrocarbon levels have been observed over 10 years, it has been difficult to distinguish whether this 'decrease' is due to natural attenuation or whether it is an artefact of the sampling methods. This

APA, Harvard, Vancouver, ISO, and other styles

16

Abbe, Owen Emmanuel. "Recovery of value from oil drill cuttings- A sustainable waste management solution for the oil and gas exploration and prodution industry." Thesis, Imperial College London, 2009. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.510754.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Leaver, Michael J. "Studies on the effects of oiled drill cuttings on marine sediments and on the hepatic cytochrome P-450 monooxygenases of plaice." Thesis, University of Aberdeen, 1987. http://digitool.abdn.ac.uk/R?func=search-advanced-go&find_code1=WSN&request1=AAIU010249.

Full text

Abstract:

Section 1 deals with the effects of four low toxicity oiled drill cuttings samples and one diesel oiled cuttings sample on marine sediments. The sediments were contained in 18 onshore tank systems and, after equilibration for 3 months, cuttings were added at levels comparable to those found at about 500m from North Sea oil installations. Tanks containing uncontaminated sediments acted as controls. All contaminated tanks showed identical changes in redox profiles, becoming most reduced after 3 months and gradually recovering thereafter. The highest sulphide levels were recorded in tanks with th

APA, Harvard, Vancouver, ISO, and other styles

18

Adegbotolu, Urenna V. "Demulsification and recycling of spent oil based drilling fluid as nanofiller for polyamide 6 nanocomposites." Thesis, Robert Gordon University, 2016. http://hdl.handle.net/10059/3136.

Full text

Abstract:

Spent oil based drilling fluid and cutting wastes are global liabilities due to their hazardous hydrocarbon content which impacts negatively on flora, fauna, and global carbon footprint. The formulation of two demulsifiers to ensure chemically enhanced phase separation of this waste into oil, water and solid components was successfully carried out in addition to recycling the solid phase into PA6 nanocomposite materials. Initial characterisation of the untreated waste was carried out by Fourier Transform Infra Red (FTIR) for total petroleum hydrocarbon (TPH) analysis, Inductively coupled plasm

APA, Harvard, Vancouver, ISO, and other styles

19

Аблєєва, Ірина Юріївна, Ирина Юрьевна Аблеева, Iryna Yuriivna Ablieieva, Леонід Дмитрович Пляцук, Леонид Дмитриевич Пляцук та Leonid Dmytrovych Pliatsuk. "Сумісна утилізація бурового шламу та фосфогіпсу: оптимізація процесу". Thesis, Сумський державний університет, 2016. http://essuir.sumdu.edu.ua/handle/123456789/46802.

Full text

Abstract:

Сумісна утилізація бурового шламу та фосфогіпсу з одержанням будівельного матеріалу є екологічно доцільною та економічно ефективною, оскільки сприяє не лише запобіганню забрудненню навколишнього середовища, але й вирішенню проблеми раціонального природокористування. Буровий шлам – відхід, що утворюється при бурінні нафтових свердловин, а фосфогіпс – відхід хімічної промисловості, що формується у результаті виробництва екстракційної фосфорної кислоти чи фосфорних добрив [1].

APA, Harvard, Vancouver, ISO, and other styles

20

LEITE, Thiago Ouverney. "Desenvolvimento inicial de Ricinus communis L. com substratos de torta de mamona e cascalho de perfura??o de po?os de petr?leo." Universidade Federal Rural do Rio de Janeiro, 2015. https://tede.ufrrj.br/jspui/handle/jspui/1888.

Full text

Abstract:

Submitted by Jorge Silva (jorgelmsilva@ufrrj.br) on 2017-07-18T18:46:18Z No. of bitstreams: 1 2015 - Thiago Ouverney Leite.pdf: 2936509 bytes, checksum: 0a40b1e1174dbb571b9a0bf187862eb9 (MD5)<br>Made available in DSpace on 2017-07-18T18:46:18Z (GMT). No. of bitstreams: 1 2015 - Thiago Ouverney Leite.pdf: 2936509 bytes, checksum: 0a40b1e1174dbb571b9a0bf187862eb9 (MD5) Previous issue date: 2015-05-25<br>CAPES<br>Petrobras<br>CNPq<br>FAPERJ<br>The drill cuttings is a residue of the oil industry produced during the drilling of onshore and offshore wells. Their mineralogical characteristics d

APA, Harvard, Vancouver, ISO, and other styles

21

Fagundes, Thais Bortotti. "Caracterização de cascalhos de perfuração de poços de petróleo por técnicas analíticas instrumentais." Universidade de São Paulo, 2018. http://www.teses.usp.br/teses/disponiveis/3/3134/tde-16072018-083539/.

Full text

Abstract:

O presente trabalho visou a caracterização dos cascalhos de perfuração de um poço de petróleo pertencente à Bacia de Santos, utilizando diferentes técnicas analíticas instrumentais. O enfoque foi dado a aplicação da difração de raios X como alternativa às práticas de estudo rotineiramente aplicadas na cabine de mud-logging, onde essencialmente são efetuadas classificações visuais das unidades litológicas do poço e geralmente em amostras de granulação fina, conferindo incertezas às descrições. Um total de 164 amostras de cascalhos foram analisadas quimicamente por espectroscopia por fluorescênc

APA, Harvard, Vancouver, ISO, and other styles

22

Zepeda, Diego Jose Cardenas. "Treatment of Petroleum Hydrocarbons in Oil-Based Drill Cutting Mud Using BiOWiSH Bioaugmentation Products." DigitalCommons@CalPoly, 2015. https://digitalcommons.calpoly.edu/theses/1440.

Full text

Abstract:

The efficacy of BiOWiSHTM-Thai Aqua, a commercially discontinued microbial product, in remediating oil based drill-cutting mud (DCM) was researched in this study. Experimentation was performed directly on DCM and on sand contaminated with oil extracted from DCM. A gas chromatograph-mass spectrometrer and a respirometer were used for analysis of total petroleum hydrocarbons (TPH) and CO2 production respectively. Five experiments were analyzed by TPH extraction and analysis; four experiments were analyzed by respirometric analysis. The specific microcosm conditions tested in the experiments were

APA, Harvard, Vancouver, ISO, and other styles

23

Silva, Moacir Guilhermino da. "Avalia??o da incorpora??o combinada dos res?duos de cascalho de perfura??o de po?o de petr?leo e de polimento do porcelanato em cer?mica vermelha." Universidade Federal do Rio Grande do Norte, 2012. http://repositorio.ufrn.br:8080/jspui/handle/123456789/12861.

Full text

Abstract:

Made available in DSpace on 2014-12-17T14:07:20Z (GMT). No. of bitstreams: 1 MoacirGS_TESE.pdf: 4771867 bytes, checksum: f93165e08f62a97944b6eed01b488995 (MD5) Previous issue date: 2012-02-10<br>Among the industries, those that produce ceramic porcelain for use in construction industry and oil, during the exploration and production period, play an important role in the production of waste. Much research has been carried out both by academia and the productive sector, sometimes reintroducing them in the same production line that generated them, sometimes in areas unrelated to their generation

APA, Harvard, Vancouver, ISO, and other styles

24

Дригулич, П. Г. "Еколого-геологічний моніторинг забруднення довкілля об'єктами нафтогазового комплексу". Thesis, Івано-Франківський національний технічний університет нафти і газу, 2008. http://elar.nung.edu.ua/handle/123456789/4250.

Full text

Abstract:

Дисертація присвячена еколого-геологічному моніторингу та розробленню технічних засобів і технологічних рішень, спрямованих на підвищення екологічної безпеки досліджуваних об’єктів НГК. Зокрема, виявлено джерела та агенти забруднення довкілля об’єктами НГК, проведено аналіз сучасного стану еколого-геофізичних досліджень на об’єктах НГК, установлено наявність локальних температурних аномалій у приповерхневих шарах у межах зон забруднення нафтою і нафтопродуктами. Теоретично обґрунтовано природу виявлених аномалій. Розроблено комплексну методику еколого-геологічного моніторингу під час проведенн

APA, Harvard, Vancouver, ISO, and other styles

25

Bayagbon, Anthony Mamurhomu. "Impact assessment of the environmental protection policies in the upstream oil industry in Nigeria / A.M. Bayagbon." Thesis, North-West University, 2011. http://hdl.handle.net/10394/6276.

Full text

Abstract:

The need for energy and the associated economic benefits from the oil and gas deposits found mainly in the Niger Delta region of Nigeria necessitated the exploration and exploitation activities being carried out by the oil and gas Companies. However, these exploration and exploitation activities due to their unpredictable nature have a huge potential for environmental pollution as been experienced in the form of oil spills, gas flaring, irresponsible disposal of waste and several other activities that have resulted in the environmental degradation of the Niger Delta region. In the light of the

APA, Harvard, Vancouver, ISO, and other styles

26

Pederick, Stuart. "Investigation of the effect of waterjet created slots in improving the performance of tricone drill bits in hard rock /." [St. Lucia, Qld.], 2005. http://www.library.uq.edu.au/pdfserve.php?image=thesisabs/absthe18616.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Barák, Vít. "Volba a optimalizace řezných podmínek pro progresivní výrobní technologie vrtání sdruženým nástrojem." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231105.

Full text

Abstract:

The thesis contains theoretical analysis of drilling by twist drill focused on the step drill. The review includes description of the drill geometry, calculation of the basic parameters of drilling, including forces and process optimization. Following is manufacturing process and analysis of the monolithic step drill designed for the required hole parameters. The optimal cutting conditions are necessary to find for the correct function of the tool. The load values of the tool are accurately assessed using a piezoelectric dynamometer, thereby obtaining the overall progress of individual loads.

APA, Harvard, Vancouver, ISO, and other styles

28

Isbilir, Ozden. "Optimisation of the geometry of the drill bit and process parameters for cutting hybrid composite/metal structures in new aircrafts." Thesis, University of Sheffield, 2012. http://etheses.whiterose.ac.uk/2890/.

Full text

APA, Harvard, Vancouver, ISO, and other styles

29

Webb, Peter M. "The influence of cutting tool geometry upon aspects of chip flow and tool wear: a theoretical, three dimensional examination of the cutting geometry and the shape of the twist drill." Thesis, Aston University, 1990. http://publications.aston.ac.uk/11890/.

Full text

Abstract:

This work is undertaken in the attempt to understand the processes at work at the cutting edge of the twist drill. Extensive drill life testing performed by the University has reinforced a survey of previously published information. This work demonstrated that there are two specific aspects of drilling which have not previously been explained comprehensively. The first concerns the interrelating of process data between differing drilling situations, There is no method currently available which allows the cutting geometry of drilling to be defined numerically so that such comparisons, where mad

APA, Harvard, Vancouver, ISO, and other styles

30

Рябчук, Д. С. "Структурна та параметрична модернізація технологічного процесу виготовлення шпинделя 1.9000-155.10-22". Master's thesis, Сумський державний університет, 2018. http://essuir.sumdu.edu.ua/handle/123456789/72516.

Full text

Abstract:

В умовах жорсткої конкуренції моторобудування необхідно, щоб готовий виріб задовольняв по всім критеріям виготовлення виробу при максимально простому налагодженні виробництва та мінімальним затратам. Одним з рішень даного питання є вдосконалення конструкції ріжучого елементу та застосування сучасних методів та інструментальних матеріалів, метало ріжучих верстатів. Тому розроблення прогресивних ТП є актуальною задачею на сьогодні. Ціль проекта – підвищення ефективності механічної обробки деталі типу вал за рахунок впровадження сучасного технологічного оснащення з використанням прогресивних р

APA, Harvard, Vancouver, ISO, and other styles

31

Kaška, Zdeněk. "Obrábění vulkanizačních forem z hliníkových slitin." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417083.

Full text

Abstract:

This diploma thesis is focused on the issue of deep drilling of vulcanization molds from various aluminum alloys. The work will describe a brief description of machined materials and tools for deep drilling, including the production of the vulcanization mold itself. Based on experimental measurements, the analysis of data and knowledge gained from deep drilling of aluminum alloys with different silicon contents will be performed. In the end, the individual components of force loads for both machined materials will be compared

APA, Harvard, Vancouver, ISO, and other styles

32

Vopařil, Josef. "Moderní řezné nástroje ze slinutých karbidů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228549.

Full text

Abstract:

This thesis is focused on cutting tools made of cemented carbides. It contains analysis of cemented carbides for uncoated and coated cutting tools. It contains examples of modern tools for turning, milling and drilling. Practical part of this thesis evaluates and compares cutting properties of two types of spiral drills.

APA, Harvard, Vancouver, ISO, and other styles

33

Пестунов, В. М., В. В. Свяцкий, Л. П. Свяцкая, V. Pestunov, V. Sviatskyi та L. Sviatska. "Разгрузка стебля сверла при глубоком сверлении". Thesis, Publishing House „Education and science” s.r.o, 2008. http://dspace.kntu.kr.ua/jspui/handle/123456789/6501.

Full text

Abstract:

Рассмотрена схема разгрузки стебля сверла для обработки глубоких отверстий созданием избыточного давления СОТС в зоне резания. Такая комбинированая обработка отверстий решает задачу снижения составляющих технологической нагрузки и позволяет расширить технологические возможности процесса сверления по глубине обработки. The scheme of unloading the drill stem for processing deep drilling by creating an overpressure of lubricant-cooling agent in the cutting zone is considered. Such combined processing of holes solves the problem of reducing the components of the technological load and allows to ex

APA, Harvard, Vancouver, ISO, and other styles

34

Пестунов, В. М., В. В. Свяцкий, Л. П. Свяцкая, V. Pestunov, V. Sviatskyi та L. Sviatska. "Уменьшение продольного изгиба стебля сверла при глубоком сверлении". Thesis, „Бял ГРАД - БГ” ООД, 2009. http://dspace.kntu.kr.ua/jspui/handle/123456789/6502.

Full text

Abstract:

Рассмотрена схема разгрузки стебля сверла для обработки глубоких отверстий созданием избыточного давления СОТС в зоне резания. Такая комбинированная обработка отверстий решает задачу снижения составляющих технологической нагрузки и позволяет расширить технологические возможности процесса сверления по глубине обработки. The scheme of unloading the drill stem for processing deep drilling by creating an overpressure of lubricant-cooling agent in the cutting zone is considered. Such combined processing of holes solves the problem of reducing the components of the technological load and allows to e

APA, Harvard, Vancouver, ISO, and other styles

35

Chen, Sebastian, and Disa Fredriksson. "Utvärdering av löstoppsborrars prestanda : Som ett led i Scanias standardiseringsarbete ienlighet med SPS." Thesis, KTH, Industriell produktion, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-232576.

Full text

Abstract:

Inom tillverkning är skärande bearbetning en vanligt förekommande process och däribland borrning.Verktygskostnader har stor påverkan på den totala tillverkningskostnaden då till exempel ett heltarbetsstycke i värsta fall kan gå förlorat vid verktygshaveri. Genom sitt arbete med ständigaförbättringar håller Scania sig konkurrenskraftiga med sina produkter av hög kvalitet. I dettaexamensarbete inom masterprogrammet Industriell Produktion på KTH har en specifik typ av borrmed löstagbar borrkrona utvärderats med avsikt att undersöka nya fabrikat.Uppdragsgivaren var motorbearbetningen (DM) på Scani

APA, Harvard, Vancouver, ISO, and other styles

36

Režný, Tomáš. "Řezné síly při vrtání vláknově vyztužených kompozitů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228620.

Full text

Abstract:

This master´s thesis is focused on fibre–filled composite materials, their distribution, labeling, usage, development and production. The aim of this work is complex processing of acquired technical knowledge, and evaluation of technological rehearsals of drilling composite materials which are reinforced by glas fiber and prepreg in terms of the impact of the machined material, wor-king conditions and the tool, and its wear to the feed force value and torque.

APA, Harvard, Vancouver, ISO, and other styles

37

Malmborg, Malin, and Magnolia Tibaduiza. "Skäreggprepareringens påverkan på slitage hos hårdmetallborrar : En fallstudie enligt DMAIC på Scania Motorbearbetning." Thesis, Luleå tekniska universitet, Institutionen för ekonomi, teknik och samhälle, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-79899.

Full text

Abstract:

Den ökande efterfrågan på högre produktkvalitet inom tillverkningsindustrin kräver hög stabilitet och lång livslängd på borrverktyg under borrningbearbetningsprocessen. En metod för att öka produktkvaliteten och därmed förlänga livslängden på borrverktyg är skäreggpreparering. Skäreggpreparering används för att skapa en kantgeometri som ger borrverktyget både en bättre styrka och högre tålighet mot slitage. Det mest förekommande slitaget på borrverktyg är fasförslitning och det utvecklas snabbt under den initiala slitningsperioden under borrens livslängd. Syftet med det här examensarbetet var

APA, Harvard, Vancouver, ISO, and other styles

38

Іщик, Дмитро Володимирович. "Підвищення якості свердел із швидкорізальної сталі при магнітно-абразивному обробленні". Master's thesis, Київ, 2018. https://ela.kpi.ua/handle/123456789/26703.

Full text

Abstract:

Дисертація на здобуття наукового ступеня магістра за спеціальністю 133 – Галузеве машинобудування. – Національний технічний університет України "Київський політехнічний інститут імені Ігоря Сікорського". – Київ, 2018. Проаналізувавши сучасні методи покращення якості та продуктивності різальної кромки металорізального інструменту, на прикладі свердел, було обрано метод магнітно-абразивного оброблення. Даний метод дозволив досягти значного покращення якості різальної кромки (шорсткості), збільшення значення твердості поверхневого шару і відповідно – періоду стійкості свердла. В дисертації пр

APA, Harvard, Vancouver, ISO, and other styles

39

Borges, Carla Luciane dos Santos. "Acidentes de trabalho em trabalhadores da Atenção Primária à Saúde das Regiões Sul e Nordeste do Brasil." Universidade Federal de Pelotas, 2012. http://repositorio.ufpel.edu.br/handle/ri/1873.

Full text

Abstract:

Made available in DSpace on 2014-08-20T13:49:45Z (GMT). No. of bitstreams: 1 Dissertacao Carla Borges.pdf: 1434502 bytes, checksum: e5ef31456209efc8e42286773779c9bc (MD5) Previous issue date: 2012-03-30<br>Job accidents in Brazil and in the world are one of the causes of sickness, limitations, disabilities and even death among workers. In the health area, studies are more focused on accidents in hospitals, although the Primary Attention to Health (APS) has about 1 million workers who act in environments with great risks of accidents due to the presence of chemical, physical and biological

APA, Harvard, Vancouver, ISO, and other styles

40

亮, 松田, та Ryo Matsuda. "ワイヤレス多機能無線ホルダーシステムを用いた加工現象のモニタと診断に関する研究". Thesis, https://doors.doshisha.ac.jp/opac/opac_link/bibid/BB13106329/?lang=0, 2019. https://doors.doshisha.ac.jp/opac/opac_link/bibid/BB13106329/?lang=0.

Full text

Abstract:

近年，IoTに基づく「つながる工場」に関する技術開発が着目され，日本の次世代の製造業を支えるために，新しい研究開発が求められている．特に機械加工の現場では，異常検知や適応制御のために加工現象を精確かつリアルタイムにモニタできる技術が必要とされている．そこで，マシニングセンタなどの工作機械において，回転工具の加工中に多チャンネルで各種の物理量を切削点近傍にてモニタ可能な無線多機能ホルダを開発し，様々な工具，加工方法を対象にその有効性を示した．<br>Currently, a smart monitoring technology has been attracting particular attention in the factory automation fields regarding the Internet of things (IoT). Particularly in the machining site, the technology of monitoring the processing phenomenon in precision and real-time is required for abnormality detection or adaptive control. Then, we developed a novel tool holder equ

APA, Harvard, Vancouver, ISO, and other styles

41

Jones, Christopher Robert. "Treatment of oily drill cuttings slurries using supercritical carbon dioxide." Master's thesis, 2010. http://hdl.handle.net/10048/1062.

Full text

Abstract:

Thesis (M. Sc.)--University of Alberta, 2010.<br>Title from pdf file main screen (viewed on June 30, 2010). A thesis submitted to the Faculty of Graduate Studies and Research in partial fulfillment of the requirements for the degree of Master of Science in Environmental Engineering, Department of Civil and Environmental Engineering, University of Alberta. Includes bibliographical references.

APA, Harvard, Vancouver, ISO, and other styles

42

Rosenthal, Angelique. "The Safe Design of a Continuous Supercritical Fluid Extraction System for the Treatment of Drill Cuttings." Thesis, 2012. http://hdl.handle.net/10214/3373.

Full text

Abstract:

The objective of this research was to design a pilot scale continuous supercritical fluid extraction (SFE) system for the treatment of drill cuttings.The design includes: • A Piping and instrumentation diagram (P&ID) • A control philosophy • An operation manual, and • A HAZOP analysis The pilot scale SFE system was designed using a HAZOP-inspired framework, which resulted in the inclusion of risk reducing measures. This design approach was appropriate for the design of a novel technology, as risk reduction was made the inherent priority throughout the process. No major changes were made

APA, Harvard, Vancouver, ISO, and other styles

43

PENG, YI-LI, and 彭議立. "Performance study of cutting fluids applied on multifacet drill(MFD)." Thesis, 1989. http://ndltd.ncl.edu.tw/handle/01254785926294894564.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Ciou, Zong-Wei, and 邱宗威. "The Reconditioning of Cutting Edges of A Two-Fluted Drill." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/08500295919229855832.

Full text

Abstract:

碩士<br>國立成功大學<br>機械工程學系碩博士班<br>95<br>Drilling is one of the most important machining processes that have been widely applied in manufacturing area. According to the statistics, the capital spending of drills is over forty billion US dollars per year in the world. Drills are usually reconditioned four or more times. Therefore, the OEM is only responsible for about 20 percent of a drill’s cutting-edge life. That means the reconditioning service is responsible for 80 percent. In the past, drills were manually reground. Compared with references of drill design, the existing literature addressing

APA, Harvard, Vancouver, ISO, and other styles

45

Komanduri, Vishnuvardhan Nagarajan. "Dynamic behavior of drill-shaft-drive assembly subjected to cutting loads." Thesis, 2005. http://spectrum.library.concordia.ca/8240/1/MR04421.pdf.

Full text

Abstract:

Drilling is one of the most important and common machining operations carried out in manufacturing industry. In drilling, the parameters such as hole-roundness, location and size, and interior surface finish are important for the proper functioning in the assembly. All of these parameters are related to the orbital motion of the drill during the drilling operation, which mainly arises from the lateral vibrations of the twist drill in a plane. In order to understand the dynamics of the process during drilling, a simplified two-dimensional model for the transverse motion of the drill rotating in

APA, Harvard, Vancouver, ISO, and other styles

46

Huang, Jui-Yuan, and 黃瑞淵. "Use vibration characteristics to analyze and monitor drill in cutting condition." Thesis, 2006. http://ndltd.ncl.edu.tw/handle/12893721815190344683.

Full text

Abstract:

碩士<br>國立高雄應用科技大學<br>模具工程系碩士班<br>94<br>The purpose of this study is to utilize vibration analysis technology to monitor a drill wearing and broken during the drill process, as well as investigate the states of its surface destruction and iron chip. Accelerometers is stuck in horizontal Y axle and axial Z axle of the workpiece to record the results during every drilling hole, and to measure vibration characteristics for each time domain and frequency domain. With time domain and frequency domain analysis, the vibration signal developing characteristics can be described. On the time domain, as dr

APA, Harvard, Vancouver, ISO, and other styles

47

Minukhin, Igor. "An Improved Method of Cutting Forces Prediction for the Primary Cutting Edges of Twist Drills." Thesis, 2013. http://spectrum.library.concordia.ca/977065/1/Minukhin_MASc_S2013.pdf.

Full text

Abstract:

This thesis originally proposes an improved theoretical method to predict thrust and torque of twist drills in high speed drilling. The three existing models and methods are thoroughly studied and evaluated. It has been observed that each method has its own advantages as well as drawbacks and some errors. A fundamental geometrical analysis is carried out on the primary cutting edge of a twist drill to understand the correlation between the geometrical features of the drill and the distribution of cutting forces. The improved method is based on the representation of the cutting forces along th

APA, Harvard, Vancouver, ISO, and other styles

48

Kadam, Sagar Chandrakant. "Static and dynamic analysis of twist drills subjected to cutting loads." Thesis, 2007. http://spectrum.library.concordia.ca/975397/1/MR34628.pdf.

Full text

Abstract:

Continuous models for a fluted twist drill are developed to study its static and dynamic bending characteristics. The static model is numerically simulated within Matlab for point loads at the free end of a twist drill. The bending curves are plotted and the bending stiffness of a twist drill is estimated. Effect of orientation of the spirally fluted cross-section at the fixed end on end deflection is studied. Characteristic bending curves for one pitch length of drill are plotted and region of minimum deflection is identified. Dynamic model is numerically simulated in Matlab over a range of

APA, Harvard, Vancouver, ISO, and other styles

49

Wang, Kuang-Jen 1962. "Drilling process evaluation by predicting drilled hole quality and drill bit wear with on-line acoustic emission signals." Thesis, 1996. http://hdl.handle.net/1957/34003.

Full text

Abstract:

Improvement of manufacturing productivity is dependent on the successful automation of manufacturing processes, the success of which is based in turn upon the availability of information which describes the state of manufacturing operations. Acoustic Emission (AE) signals related to the cutting process and tool wear have been recently applied to monitor manufacturing processes, and various AE parameters can be used to provide process information. For example, when cutting tools become worn, AE energy generated at the interface of tool flank and work piece increases. This study is thus an exper

APA, Harvard, Vancouver, ISO, and other styles

50

Fenn, Orrie. "The use of water jets to enhance the performance of free rolling cutters in hard rock." Thesis, 2015. http://hdl.handle.net/10210/13419.

Full text

Abstract:

D.Ing.<br>The research described in this thesis is an investigation into fundamental aspects of the mechanical excavation of hard rock using free rolling cutters, currently being undertaken at the Chamber of Mines of South Africa Research Organization. The motivation for undertaking this study was provided by the need to improve the effectiveness and operational efficiency of this type of tool with regards to its application in the South African gold mining industry. Earlier work has shown that the use of high-pressure water jets enhances the performance of mechanical cutting in hard rock. To

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!