Dissertations / Theses: 'DSC - Differential Scanning Calorimetry'

1

Snell, Andrew John Roger. "Application of Differential Scanning Calorimetry to Characterize Thin Film Deposition Processes." Cleveland State University / OhioLINK, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=csu1280943337.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Kuntz, Michael. "Quantifying Isothermal Solidification Kinetics during Transient Liquid Phase Bonding using Differential Scanning Calorimetry." Thesis, University of Waterloo, 2006. http://hdl.handle.net/10012/890.

Full text

Abstract:

The problem of inaccurate measurement techniques for quantifying isothermal solidification kinetics during transient liquid phase (TLP) bonding in binary and ternary systems; and resulting uncertainty in the accuracy of analytical and numerical models has been addressed by the development of a new technique using differential scanning calorimetry (DSC). This has enabled characterization of the process kinetics in binary and ternary solid/liquid diffusion couples resulting in advancement of the fundamental theoretical understanding of the mechanics of isothermal solidification. The progress of isothermal solidification was determined by measuring the fraction of liquid remaining after an isothermal hold period of varying length. A 'TLP half sample', or a solid/liquid diffusion couple was setup in the sample crucible of a DSC enabling measurement of the heat flow relative to a reference crucible containing a mass of base metal. A comparison of the endotherm from melting of an interlayer with the exotherm from solidification of the residual liquid gives the fraction of liquid remaining. The Ag-Cu and Ag-Au-Cu systems were employed in this study. Metallurgical techniques were used to compliment the DSC results. The effects of sample geometry on the DSC trace have been characterized. The initial interlayer composition, the heating rate, the reference crucible contents, and the base metal coating must be considered in development of the experimental parameters. Furthermore, the effects of heat conduction into the base metal, baseline shift across the initial melting endotherm, and the exclusion of primary solidification upon cooling combine to systematically reduce the measured fraction of liquid remaining. These effects have been quantified using a modified temperature program, and corrected using a universal factor. A comparison of the experimental results with the predictions of various analytical solutions for isothermal solidification reveals that the moving interface solution can accurately predict the interface kinetics given accurate diffusion data. The DSC method has been used to quantify the process kinetics of isothermal solidification in a ternary alloy system, with results compared to a finite difference model for interface motion. The DSC results show a linear relationship between the interface position and the square root of the isothermal hold time. While the numerical simulations do not agree well with the experimental interface kinetics due to a lack of accurate thermodynamic data, the model does help develop an understanding of the isothermal solidification mechanics. Compositional shift at the solid/liquid interface has been measured experimentally and compared with predictions. The results show that the direction of tie-line shift can be predicted using numerical techniques. Furthermore, tie-line shift has been observed in the DSC results. This study has shown that DSC is an accurate and valuable tool in the development of parameters for processes employing isothermal solidification, such as TLP bonding.

APA, Harvard, Vancouver, ISO, and other styles

3

Holeman, Teryn A., and Teryn A. Holeman. "Effects of Three Cardiomyopathic-Causing Mutations (D230N, D84N, and E62Q) on the Structure and Flexibility of α-Tropomyosin." Thesis, The University of Arizona, 2017. http://hdl.handle.net/10150/624101.

Full text

Abstract:

Cardiac contraction at the level of the sarcomere is regulated by the thin filament (TF) composed of actin, alpha tropomyosin (TPM), and the troponin (Tn) complex (cTnT: cTnC: cTnI). The "gate-keeper" protein, α-TPM, is a highly conserved α-helical, coiled-coil dimer that spans actin and regulates myosin-actin interactions. The N-terminus of one α-TPM dimer inter-digitates with the C-terminus of the adjacent dimer in a head-to-tail fashion forming the flexible and cooperative TPM-overlap that is necessary for myofilament activation. Two dilated cardiomyopathy (DCM) causing mutations in TPM (D84N and D230N) and one hypertrophic cardiomyopathy (HCM) causing mutation (E62Q), all identified in large, unrelated, multigenerational families, were utilized to study how primary alterations in protein structure cause functional deficits. We hypothesize that structural changes from a single point mutation propagate along the -helical coiled-coil of TPM, thus affecting its regulatory function. Structural effects of the mutations studied via differential scanning calorimetry (DSC) on TPM alone revealed significant changes in the thermal unfolding temperatures of both the C- and N-termini for all mutants compared to WT, indicating that mutational effects propagate to both ends of TPM, thus affecting the overlap region. Although, of note, the proximal termini to the mutation has shown more significant structural changes compared to WT. DSC analysis on fully reconstituted TF’s (Tn:TPM:Actin) revealed effects on the TPM-Actin cooperativity of activation, affecting interaction strength (thermal stability), and the rigidity of TPM moving along actin (FWHM). To characterize the resultant functional effect of these discrete changes in thermal stability and TPM rigidity, ATPase assays were used to measure actomyosin activation in the presence and absence of Ca2+. Together, these data will provide a molecular level understanding of the structural and functional deficits caused by these mutations to help elucidate the mechanisms leading to disease.

APA, Harvard, Vancouver, ISO, and other styles

4

Zander, Patrik, and Johan Hammarström. "Värmebehandling av segjärn med hög kiselhalt." Thesis, Tekniska Högskolan, Högskolan i Jönköping, JTH, Maskinteknik, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-16377.

Full text

Abstract:

Bakgrunden till detta examensarbete var att Qumex Materialteknik vid ett flertal tillfällen konstaterat att material av typen SS 0725 har uppvisat bristfälliga härdresultat. Materialet, som är relativt nytt på marknaden, är ett gjutjärn av typen segjärn och utmärker sig gentemot andra segjärn på grund av sitt höga innehåll av kisel. Då segjärn enligt den nu gällande EN-standarden klassificeras efter sina mekaniska egenskaper uppstår ett problem gällande SS 0725. Materialet uppfyller de krav som är ställda för EN-GJS-500-7 och hamnar därmed under samma materialbeteckning som ett segjärn med betydligt lägre kiselhalt. Att två material med olika kemisk sammansättning hamnar under samma beteckning kan innebära problem. Syftet med denna rapport är att fastslå vilken påverkan den höga kiselhalten har på materialet vid värmebehandling av typen släckhärdning med efterföljande anlöpning. I försöken ingick fyra material. Det som skiljde materialen åt var halterna av koppar och kisel. De härdades vid tre olika temperaturer och under tre olika tider för att sedan släckas i olja. Målet med släckhärdningen var att materialen skulle få en helt martensitisk struktur vilket då klassades som ett bra härdresultat. Resultatet utvärderades sedan genom optisk mikroskopi och hårdhetsmätningar. En undersökning av materialens fasomvandlingstemperaturer genomfördes med hjälp av Differential Scanning Calorimetry. Resultatet visar att kiselhalten har stor påverkan på den temperatur som krävs för att erhålla ett bra härdresultat. För material med låg kiselhalt uppnåddes fullständig martensitbildning efter släckhärdning från 840°C. För material med hög kiselhalt uppnåddes liknande strukturella och hårdhetsmässiga resultat först vid en så hög temperatur som 900°C och behandlingstider längre än 1 h. Den relativa skillnad som uppmättes i fasomvandlingstemperatur med hjälp av Differential Scanning Calorimetry mellan högkiselmaterial och lågkiselmaterial var 45°C. Detta resultat kombinerat med analyserna av härdprocesserna visar att det krävs kraftigt ökad temperatur vid värmebehandling av högkiselmaterialet SS 0725.
The background to this thesis was that Qumex Materialteknik at several occasions had received material of type SS 0725 that had shown deficient heat treatment results. The material, which is relatively new, is a cast iron of type ductile iron and differ against other ductile irons because of its high silicon content. According to EN standard ductile irons are classified by their mechanical properties. A problem then occurs with the new material SS 0725 because of this. The material fulfils the requirements for EN-GJS-500-7 and is therefore in the same classification as a ductile iron with much lower silicon content. Two materials having major differences in chemical composition ending up in the same classification can be problematic. The purpose of this report is to determine impact of high silicon content in ductile iron when heat treated and quench hardened. The experiment included four materials, and the major difference between the materials were their content of copper and silicon. The heat treatment process was performed at three different temperatures and three different treatment times. Afterwards the samples were quenched in oil. The ambition of the quench hardening was to obtain a material structure of 100% martensite. By optical microscopy and hardness measurements the results then were evaluated. An investigation of the phase transformation temperature in the materials was made by using Differential Scanning Calorimetry. The results show that the amount of silicon content has great influence on the temperature for receiving good hardening results. To achieve 100% martensite after quench hardening in materials with low silicon content the temperature needs to be over 840°C. For material with high level of silicon content the temperature for achieving 100% martensite needs to be 900°C and the treatment time should be over 1 h. The relative difference in phase transformation temperature was measured using Differential Scanning Calorimetry. The results of the measurements between the materials with high silicon content and materials with low silicon content was 45°C. This result combined with the analysis of the heat treatment process shows that a major increase of the temperature is needed to heat treat SS 0725.

APA, Harvard, Vancouver, ISO, and other styles

5

Gundogar, Sati Asli. "Thermal Characterization And Kinetics Of Crude Oils By Tga And Dsc Methods." Master's thesis, METU, 2010. http://etd.lib.metu.edu.tr/upload/12611502/index.pdf.

Full text

Abstract:

In recent years, the application of thermal analysis to study the combustion and pyrolysis behavior of fossil fuels has gained a wide acceptance because of its significance for industry and economy. In this thesis, the thermal and kinetic analysis of different origin crude oil samples are performed by two well-known thermal analysis techniques: Differential Scanning Calorimetry (DSC) and Thermogravimetry (TG/DTG). The investigation of combustion and pyrolysis behaviors, kinetic analysis of oil samples and the determination of heating rate effect are the main objectives of this study. Six different crude oils from the Southeastern region of Turkey are analyzed throughout the study. All experiments are performed at different heating rates (5, 10 and 15º
C/min) and air is used for combustion and nitrogen for pyrolysis experiments. In combustion experiments, TGA and DSC techniques indicate that the combustion process of crude oils studied is composed of two main reaction regions. These are low-temperature (LTO) and high-temperature oxidation (HTO) regions. In LTO, huge mass loss occurs (from 69 to 87 %) due to high amount of free moisture and volatile hydrocarbons contained in oil samples. Combustion reactions continue up to 900 K. On DSC curves, two exothermic regions of oxidation regimes are detected. Comparing TG/DTG and DSC curves, it can be understood that the mass loss under combustion is accompanied by exothermic peaks because of the oxidative degradation of crude oil components. As in combustion, two distinct reaction regions are revealed under pyrolysis for all samples. The first region indicates distillation and the second one is due to thermal cracking reactions occur at high temperatures and completed up to 840 K. As expected, lighter crude oils have relatively higher amounts of mass loss in distillation region as compared to heavier ones. Besides, residue amount and burn-out temperatures are higher for heavier oils with higher asphaltene content in cracking region. DSC curves for both reactions show endothermic effects. In combustion and pyrolysis experiments, it is noticed that higher heating rates are resulted in higher reaction regions. Distinguishing peaks of samples shift to higher temperatures with an increase in heating rate. Heat of reaction amount under DSC curves is related to asphaltene content and &
#730
API gravity of crude oils. It is deduced that, when &
#730
API gravity of crude oils decreases, the heat value of this reaction increases. The kinetic parameters are evaluated by different kinetic models and mean activation energies (Em) of samples are obtained. At the end, a correlation is established between Em and &
#730
API gravity of oil samples. It is concluded that heavier oils have higher activation energy and Arrhenius constant values for each reaction region. Besides, it is proved that the activation energy is mostly insensitive to the heating rate.

APA, Harvard, Vancouver, ISO, and other styles

6

Pöhlmann, Milena. "Thermisch härtende Polymerverbundmaterialien als Basis für neue Befestigungssysteme." Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2006. http://nbn-resolving.de/urn:nbn:de:swb:14-1165492370619-99312.

Full text

Abstract:

Mit der Entwicklung und Einführung ökologischer Bauweise im Neubau sowie neuen Baustoffsystemen in Sandwichbauweise wird es zunehmend erforderlich, neue effektive Befestigungsvarianten zu entwickeln, die eine dauerhafte Fixierung auch unter sicherheitstechnischen Bestimmungen sowie aus Garantie- bzw. haftungsrechtlichen Gründen ermöglichen. Die aus der Praxis bisher bekannten chemischen Befestigungssysteme (Zweikomponentenverbundmörtel, Verbundankerpatronen) weisen hinsichtlich der Applikation unter bautechnischen Bedingungen noch einige Nachteile auf. Dazu gehören vor allem längere Aushärtungszeiten zur Realisierung der abschließenden Verbundfestigkeit, Inhomogenitäten im Verbund, der Einsatz toxischer Verbindungen und eine Limitierung der Applikationsmöglichkeiten in horizontalen und Überkopf-Einsatzbereichen sowie Hohlkammersystemen. Alle zuvor genannten Punkte haben bis jetzt die Nutzung solcher Verbundwerkstoffe als universale Anwendungsmöglichkeit verhindert. Ein neues chemisches Befestigungssystem, welches aus Novolak gehärteten mit Hexamethylentetramin (Hexa) und anorganischen Füllstoff besteht, wurde für Applikationen in Beton entwickelt. Das Bindemittel härtet bei der Temperaturzuführung aus. Die unkatalysierte Befestigungsmasse zeigt bei einer Temperatur zwischen 150-300 °C eine hohe Reaktivität. Die Vorteile dieses Systems sind die unbegrenzte Lagerfähigkeit der vorgemischten härtbaren Masse sowie die Gewährleistung einer homogenen Netzwerkstruktur im gesamten Verbund und sie ist frei von giftigen und flüchtigen Substanzen. Auf den Einsatz toxischer Substanzen wurde verzichtet. In dieser Arbeit wurde die Gesamtkinetik der Reaktion während des Aushärtungsprozesses dieser Polymerkomposite untersucht. Die DSC- (nicht-isothermen, isothermen) und MDSC-Untersuchungen haben sich als ein sicheres Verfahren zur Qualitätskontrolle des Aushärtezustands der Befestigungssysteme herausgestellt. Parallel zur nicht-isothermischen und isothermischen DSC wurden Leitfähigkeitsmessungen durchgeführt, um den Endpunkt der Aushärtungsreaktion zu bestimmen
The development and introduction of ecological construction methods and the use of sandwich materials make it necessary to develop new fixing systems and technologies. Dealing with the application in concrete and other substrates commercial chemical fixing systems show some disadvantages up to date. Especially the rather long curing time in order to realize the final bond strength, inhomogenities in the composite, the partial use of toxic substances and application limits of such systems in horizontal direction as well as hollow section materials has so far prevented the use of such composites for all-purpose applications. A new chemical fixing system, which consists of hexamethylene tetramine (hexa) cured novolac and inorganic filler, was developed for application in concrete. It is applied by a thermo-curing procedure. The uncatalyzed curable mixture has a high reactivity at temperature between 150-300 °C. Compared with commercial chemical fixing systems, the premixed curable mass has many benefits. First it has a unique storage stability and second, it is free of toxic and volatile substances. Another important aspect is, it is self-foaming. In this study was investigated the overall kinetics of the reaction during the curing process of these polymer composites. An appropriate method for this experiment proved to be the DSC in isothermal and non-isothermal mode and MDSC. This turned out to be a safe quality control technique for these systems. Parallel to the non-isothermal and isothermal DSC conductivity measurements have been performed to determine the end point of the curing reaction

APA, Harvard, Vancouver, ISO, and other styles

7

Gul, Kiymet Gizem. "Thermal Characterization And Kinetic Analyis Of Sara Fractions Of Crude Oils By Tga And Dsc Methods." Master's thesis, METU, 2011. http://etd.lib.metu.edu.tr/upload/12613614/index.pdf.

Full text

Abstract:

In this thesis, four different crude oil samples and their saturate, aromatic and resin fractions were analyzed by two different thermoanalytical methods, thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The experiments were performed at three different heating rates (5, 10 and 15 °
C/min) under air atmosphere. Same gas flow rate and same pressure were applied to all samples. The aim is to determine the kinetic analysis and combustion behavior of crude oils and their fractions and also determining the effect of heating rate on all samples. For all samples two main reaction regions were observed in thermogravimetry (TG), differential thermogravimetry (DTG) and DSC curves due to the oxidative degradation of crude oil components. It was deduced that the free moisture, volatile hydrocarbons were evaporated from the crude oils, light hydrocarbons were burned and fuel was formed in the first reaction region. The second reaction region was the main combustion region where the fuel was burned. From the TGA curves, it was detected that the heavier fraction, resins, lost considerable amounts of their initial mass, approximately 35%, while saturates lost only approximately 3% of their initial mass in the second reaction region. DSC curves of the samples were also examined and observed that as the sample got heavier, the heat of the reaction increased. Saturates, lightest part of the crude oil fractions, gave minimum heat of reaction. As the heating rate increased, shift of peak temperatures to high values and higher reaction regions were observed. The kinetic analysis of crude oils and their fractions were also performed using different kinetic methods. Activation energies (E), mean activation energies (Emean) and Arrhenius constants were found for crude oils and fractions. It was deduced that the resins gave the highest activation energy and Arrhenius constant for both reaction regions. Moreover, it was encountered that heating rate has no effect on activation energies.

APA, Harvard, Vancouver, ISO, and other styles

8

Trindade, Nuno Miguel Passarinho. "Stochastic modeling of the thermal and catalytic degradation of polyethylene using simultaneous DSC/TG analysis." Master's thesis, Faculdade de Ciências e Tecnologia, 2012. http://hdl.handle.net/10362/8468.

Full text

Abstract:

Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica
In the present work a stochastic model to be used for analyzing and predicting experimental data from simultaneous thermogravimetric (TG) and differential scanning calorimetry (DSC) experiments on the thermal and catalytic degradation of high-density polyethylene (HDPE) was developed. Unlike the deterministic models, already developed, with this one it’s possible to compute the mass and energy curves measured by simultaneous TG/DSC assays, as well as to predict the product distribution resulting from primary cracking of the polymer, without using any experimental information. For the stochastic model to predict the mass change as well as the energy involved in the whole process of HDPE pyrolysis, a reliable model for the cracking reaction and a set of vaporization laws suitable to compute the vaporization rates are needed. In order to understand the vaporization process, this was investigated separately from cracking. For that, a set of results from TG/DSC experiments using species that vaporize well before they crack was used to obtain a global correlation between the kinetic parameters for vaporization and the number of C-C bonds in the hydrocarbon chain. The best fitting curves were chosen based on the model ability to superimpose the experimental rates and produce consistent results for heavier hydrocarbons. The model correlations were implemented in the program’s code and allowed the prediction of the vaporization rates. For the determination of the global kinetic parameters of the degradation reaction to use in the stochastic model, a study on how these parameters influence the TG/DSC curves progress was performed varying those parameters in several simulations, comparing them with experimental data from thermal and catalytic (ZSM-5 zeolite) degradation of HDPE and choosing the best fitting. For additional improvements in the DSC stochastic model simulated curves, the thermodynamic parameters were also fitted. Additional molecular simulation studies based on quantum models were performed for a deeper understanding on the reaction mechanism and progress. The prediction of the products distribution was not the main object of the investigation in this work although preliminary results have been obtained which reveal some discrepancies in relation to the experimental data. Therefore, in future investigations, an improvement of this aspect is necessary to have a stochastic model which predicts the whole information needed to characterize HDPE degradation reaction.

APA, Harvard, Vancouver, ISO, and other styles

9

Almutairi, Badriah Saad. "Correlating Melt Dynamics with Glass Topological Phases in Especially Homogenized Equimolar GexAsxS100-2x Glasses using Raman Scattering, Modulated- Differential Scanning Calorimetry and Volumetric Experiments." University of Cincinnati / OhioLINK, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1593272974284834.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Saffarini, Ghassan. "X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), differential scanning calorimetry (DSC) and density study of ternary chalcogenide glasses based on Ge-Se and Ge-S." Thesis, Brunel University, 1991. http://bura.brunel.ac.uk/handle/2438/7396.

Full text

Abstract:

Glasses of the systems Ge-Se-X (X = Ga, Sn, Bi, Sb), Ge-S-Y (Y = Ag, Ga, Sn, Bi) and Se-S have been examined using X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), density and differential scanning calorimetry (DSC). Two of the compositions, GeSe2 and (GeSe2)92Ga8, have also been examined by extended X-ray absorption fine structure (EXAFS) and X-ray absorption near edge structure (XANES). The emphasis of the XPS measurements was on the changes in the binding energies with composition of the core peaks of the glasses, and on the plasmon energy losses from the L3M4,5M4,5 Auger lines of Se and Ge. It was found that there were small shifts in the binding energies of the core peaks on substitution but the plasmon energy changed markedly with composition. For the XRD measurements, the focus was on two features : (a) to ensure that the samples prepared were truely amorphous and (b) to confirm the presence of the first sharp diffraction peak (FSDP) on the interference functions. The density measurements showed that the addition of the third element (X or Y) to the binary resulted in an increase in the relative density except for one system, Ge-Se-Sn, which showed the opposite behaviour. The DSC measurements showed that the addition of the third element to the binary resulted in a decrease in the glass transition temperatures. The EXAFS and XANES measurements of GeSe2 and (GeSe2)92Ga8 glasses showed that there was very little change in the local order around the Ge atom in GeSe2 glass with increase in temperature and that the local order around the Ge atom changes on alloying GeSe2 with Ga. Correlations between parameters and measured properties of the ternary alloys have been investigated. It has been found that the parameter , the average coordination number, correlates well with certain structural properties but badly with others. Suggestions are made for an alternative to .

APA, Harvard, Vancouver, ISO, and other styles

11

Ladický, Peter. "Vliv síťování na denaturaci kolagenových vzorků z různých živočišných zdrojů." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2018. http://www.nusl.cz/ntk/nusl-376892.

Full text

Abstract:

The diploma thesis deals with the preparation, crosslinking and characterization of collagen films from various animal sources. Collagen from pig, Tilapia, horse, cow and crocodile was used to prepare collagen films. Chemical crosslinking agents EDC/NHS and Lyofix were used to crosslink the prepared films. In the experimental part, differential scanning calorimetry (DSC) method was optimized to determine the denaturation temperature of individual collagen films before and after crosslinking. In addition, the ability of films to swell and degrade has been analyzed. The presence of characteristic groups present in the collagen structure was verified using infrared spectroscopy. The sample morphology was analyzed using Scanning Electron Cryomicroscopy (Cryo-SEM). The results show that EDC/NHS is a better collagen crosslinking agent compared to Lyofix. The best source for the preparation of thermally stable films is piggy collagen, whose denaturation temperature after crosslinking with EDC/NHS was about 69 °C and could represent more than adequate substitution for cow collagen, which is currently most used in the field of tissue engineering and food industry.

APA, Harvard, Vancouver, ISO, and other styles

12

Buyukyagci, Arzu. "Synthesis And Characterization Of Monoacetylferrocene Added Sulfonated Polystyrene Ionomers." Master's thesis, METU, 2004. http://etd.lib.metu.edu.tr/upload/3/1108026/index.pdf.

Full text

Abstract:

Incorporation of monoacetylferrocene to the sulfonated polystyrene ionomers imparted some changes in the properties of sulfonated polystyrene. Sulfonation was carried out by acetic anhydride and concentrated sulphuric acid. The sulfonation reaction and the degree of sulfonation were determined by analytical titration and adiabatic bomb calorimeter . For this purpose, sulfonated polystyrene (SPS) samples with varying percentages of sulfonation were prepared between 0.85% and 6.51%. Monoacetyl ferrocene was used in equivalent amount of sulfonation through addition procedure. FTIR Spectroscopy was one of the major techniques used to support the successful addition of AcFe to the SPS samples. Altering the sulfonation degree did not change the characteristic peak positions, but increased the peak intensities with increasing the degrees of sulfonation. Mechanical properties of resultant polymers were investigated. As a result, elastic modulus of polymers decreased by the amount of monoacetylferrocene. Thermal characteristic were found by Differential Scanning Calorimeter (DSC). Thermal analysis revealed that sulfonated polystyrene samples after addition of monoacetylferrocene displayed lower values of Tg. Microscopic analysis were made by Scanning Electron Microscopy (SEM) and single phase for each sample was observed. Besides, energy dispersed micro analysis showed an increase in the intensity of the iron (II) peaks that is related to the amount of monoacetylferrocene added to the SPS samples. Flame retardancy for each polymer was also examined and found that addition of monoacetylferrocene to sulfonated polystyrene does not change the Limiting Oxygen Index value (LOI)(17). However, LOI value for polystyrene is 18.

APA, Harvard, Vancouver, ISO, and other styles

13

Topa, Ece Hatice. "Thermal Characterization And Kinetics Of Diesel, Methanol Route Biodiesel, Canola Oil And Diesel-biodiesel Blends At Different Blending Rates By Tga And Dsc." Master's thesis, METU, 2010. http://etd.lib.metu.edu.tr/upload/12612460/index.pdf.

Full text

Abstract:

Application of thermogravimetric analysis to the renewable energy sources is a novel study and it has been becoming attractive by the researchers in recent years. In this thesis, thermal and kinetic properties of biodiesel as new energy source, diesel and canola oil have been analyzed by using very popular thermogravimetric analysis methods which are
Differential Scanning Calorimetry (DSC) and Thermogravimetry (TGA/DTG). The main aim of the study is to observe the combustion and pyrolysis behaviour of methanol route biodiesel and diesel blends at different blending rates. Additionally, combustion and pyrolysis behaviour of canola oil, the origin of biodiesel have been analysed to observe the transesterification reaction effect on biodiesel. Therefore, biodiesel, diesel, canola oil and blends of diesel and biodiesel at different percentages are exposed to isothermal heating under nitrogen and air atmosphere with a constant heating rate of 5, 10 and 15

APA, Harvard, Vancouver, ISO, and other styles

14

Chbeir, Ralph. "Correlating Melt Dynamics with Topological Phases of Homogeneous Chalcogenide- and Modified Oxide- Glasses Using Raman Scattering, Infra-Red Spectroscopy, Modulated-Differential Scanning Calorimetry and Volumetric Experiments." University of Cincinnati / OhioLINK, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1573224465185235.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Othman, Daryan Jalal. "The influence of adhesive curing temperature upon the performance of FRP strengthened steel structures at ambient and elevated temperatures." Thesis, University of Edinburgh, 2017. http://hdl.handle.net/1842/29646.

Full text

Abstract:

The structural adhesives widely used in structural strengthening applications are thermoset ambient cure adhesive polymers. At ambient temperatures, these polymers are in a relatively hard and inflexible state. At higher temperatures, the material becomes soft and flexible. The region where the molecular mobility changes dramatically is known as the glass transition temperature Tg and often is presented as a single value. Epoxy polymers exhibit a significant reduction in mechanical properties near glass transition temperature Tg when they are exposed to elevated temperatures. Glass transition temperature Tg is used to characterise the change in epoxy adhesive properties with changing temperature. The mechanical properties of epoxies tend to improve with curing temperature. This is because the crosslink density between the adhesive molecular structures increases during the curing process consequently the Tg improves. The aims of this work are first to demonstrate the importance of curing temperature. Second, to investigate the influence of glass transition temperature !! improvement on the performance of EB-FRP strengthened steel structures in flexure at ambient and elevated temperatures. Third, to compare analytical results with experimental results from the flexure tests results. Finally, to compare the current design guideline recommendations with the flexure tests results. The most commonly used methods to evaluate Tg Dynamic Mechanical Analysis (DMA) and Differential Scanning Calorimetry (DSC) were used to study Tg. Two off-shelf structural adhesives were investigated to understand their property variation with temperature. Epoxy coupons were cured at different elevated temperature and humidity environments up to 28 days. A combination of two extreme relative humidity of 0 and 100% and variable curing temperatures between 15 to 80°C were considered. From a test matrix of 300 DMA and over 250 DSC coupons these conclusions were drawn. First, ambient cured thermosets have a linear relationship between Tg and curing temperature, but Tg is reduced if a certain temperature is reached. Second, a fully cured adhesive requires heating treatment. Without a curing regime, designed Tg may never be achieved. Finally, curing time is crucial at the low curing temperatures while it is less significant at the higher curing temperature. The results of Tg investigation were used to select appropriate curing temperature that the adhesives resistance to temperature can be maximised without damaging the mechanical properties. The study helps designs to understand and assess the behaviour of these two adhesives when they are exposed to extreme temperatures. The study increases the awareness that a fully cured adhesive may never be achieved at ambient or low temperatures. It is important to find the mechanical properties and Tg when the coupons are exposed to the same curing temperature. To investigate the influence of glass transition temperature Tg improvement on the performance of EB-FRP strengthened steel structures in flexure at ambient and elevated temperature, nine three metre length beams were designed to behave as a concrete-steel composite bridge deck. The beams were tested in four-point bending. Lap shear, DMA test, and pull-off adhesion samples were prepared and cured at the same conditions and tested at ambient temperature. Six beams were tested under only mechanically loading at ambient temperature, including the control specimen. Five beams were tested at ambient temperature to show the effects of adhesive curing on FRP strengthened sections. A significant increase of load capacity of the adhesive joints was achieved due to the curing of the joints at elevated temperature. The failure occurred was in the same manner. An increase in the load capacity was observed with increasing curing temperature. An increase of approximately 25% was noticed in the ultimate load capacity of the specimens cured at 50°C compared to the specimens cured at 30°C. The load capacity of lap-shear specimens cured at 50°C was 28% higher than the specimens cured at 30°C. Three specimens were tested under mechanical and thermal loading. A bespoke thermal chamber was designed and fabricated to apply a controlled thermal loading. The beams were loaded mechanically up to 350kN, first. The temperature of the specimens was then increased at a rate of 0.8°C/min. The sustained load 350kN remained constant during the heating phase. Digital Image Correlation (DIC) technique was used to detect the slippage of the tip of the FRP plates. The only specimen cured at 30°C showed relatively poor performance compared to the two specimens cured at 50°C. The plate ends started to slip when the adhesive storage modulus from the DMA runs reduced approximately by 15 and 18% for the beams cured at 30 and 50°C respectively. Pull-off adhesion tests confirmed that adequate surface preparation of over 25 MPa was achieved The flexural model for the composite steel section represented to predicate load-deflection behaviour of the specimens using semi-experimental constitutive material law. The model successfully predicts the load-deflection behaviour of specimens, considering the strain hardening contribution. A bond stress analysis is also presented, which counts for the effect of FRP plate moment effect. The experimental and theoretical FRP plate slippage assuming only adhesive degradation with temperature are compared. The analytical bond models cannot predict the experimental failure because the linear elastic material properties were assumed and the failure was adhesion.

APA, Harvard, Vancouver, ISO, and other styles

16

Wang, Wenhu. "Effect of Fullerene Nano-spheres on Evaporation Kinetics of Fluids." Wright State University / OhioLINK, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=wright1323918423.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Sumarna, Omay. "Physikalisch-chemische Charakterisierung von ausgewählten supramolekularen Kristalleinschlussverbindungen." Doctoral thesis, Technische Universitaet Bergakademie Freiberg Universitaetsbibliothek "Georgius Agricola&quot, 2009. http://nbn-resolving.de/urn:nbn:de:swb:105-7158838.

Full text

Abstract:

Die vorliegende Arbeit befasst sich mit experimentellen Untersuchungen zur physikalisch-chemischen und strukturellen Charakterisierung von neuartigen supramolekularen Kristalleinschlussverbindungen am Beispiel der Clathrate der Wirtverbindung 2,2’-bis(9-hydroxy-9-fluorenyl)biphenyl mit Aceton (polar) sowie Chloroform (unpolar). Durch die Kombination von Röntgenstrukturanalysen mit systematischen Messungen thermodynamischer Größen wie Löslichkeit, Einschluss-, Zersetzungs-, Lösungs- und Kristallisationsenthalpien konnten neue Erkenntnisse bezüglich der Struktur-Eigenschaftsbeziehungen sowie zur Rolle der Wirt-Gast Wechselwirkungen in den existierenden Einschlussverbindungen abgeleitet werden. Die Einschlussbildung bzw. Kristallisation verläuft für alle untersuchten Clathratphasen exotherm. Dies bedeutet, dass die Einschlussverbindungen gegenüber dem reinem Wirt energetisch stark begünstigt sind. Der bestimmende Beitrag hierfür resultiert aus der Bildung eines optimal gepackten Kristallgitters, während spezifische Wirt-Gast Wechselwirkungen nur eine untergeordnete Rolle spielen. Das Zersetzungsverhalten der verschiedenen Clathratphasen kann widerspruchsfrei aus der Packungsstruktur der Kristalle erklärt werden.

APA, Harvard, Vancouver, ISO, and other styles

18

Longhini, Renata. "Avaliação de interações do ácido gálico frente a adjuvantes empregados em formas farmacêuticas sólidas." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2006. http://hdl.handle.net/10183/8566.

Full text

Abstract:

Neste trabalho foram avaliados o comportamento do ácido gálico e de adjuvantes tecnológicos frequentemente empregados em formas farmacêuticas sólida, e das suas misturas físicas, através de métodos termoanalíticos e por espectroscopia de infravermelho. Foi investigada também a influência da compactação sobre as misturas físicas equiponderais. Os adjuvantes avaliados foram amidoglicolato de sódio, celulose microcristalina, croscarmelose sódica, crospovidona, dióxido de silício coloidal, estearato de magnésio e polimetacrilato. O ácido gálico apresentou um comportamento térmico diferenciado nas misturas, assumindo, provavelmente, uma forma instável com menor ponto de fusão. Os resultados obtidos por DSC demonstraram interação de natureza física com mudança de entalpia para misturas do ácido gálico com celulose microcristalina, crospovidona, estearato de magnésio e polimetacrilato. A interação não pode ser confirmada por espectroscopia de infravermelho para a crospovidona e polimetacrilato, devido à sobreposição das bandas com o ácido gálico. Os demais adjuvantes também apresentaram interação física, porém, sem alteração da entalpia, confirmada por espectroscopia de infravermelho, relacionada ao estabelecimento de ligações de hidrogênio entre os componentes da mistura. A compactação demonstrou particular influência sobre a interação com celulose microcristalina, croscarmelose sódica e crospovidona.
In this work were evaluated the behavior of the gallic acid and technological excipients used in sold dosage forms and their physical powder mixtures, by Differential Scanning Calorimetry (DSC) and Thermogravimety (TGA) and infrared spectroscopy (IR). The influence of the compression force on the 1:1 (w/w) physical mixtures was also investigated. The excipients evaluated were sodium starch glycolate, microcrystalline cellulose, croscarmellose sodium, crospovidone, colloidal silicon dioxide, magnesium stearate and polymethacrylate. Gallic acid presented a different thermal behavior in the mixtures, assuming, probably, an unstable form with a lower melting point. The results obtained by (DSC) demonstrated the occurrence of physical interactions with enthalpy changes for the mixtures of gallic acid with microcrystalline cellulose, crospovidone, magnesium stearate and polymethacrylate. The interaction could not be confirmed by infrared spectroscopy for crospovidone and polymethacrylate, due to overlapping of the gallic acid IR bands. The other excipients also presented physical interaction, however, without alteration of the enthalpy, confirmed by IR, which could be correlated to the establishment of hydrogen bonds between the components of the mixture. The compression of the powder mixtures demonstrated a particular influence of the interaction of gallic acid with microcrystalline cellulose, croscarmellose sodium and crospovidone.

APA, Harvard, Vancouver, ISO, and other styles

19

Uzzell, Jamar. "STRUCTURAL BASIS FOR THERMAL STABILITY OF THERMOPHILIC TRMD PROTEINS." VCU Scholars Compass, 2011. http://scholarscompass.vcu.edu/etd/2539.

Full text

Abstract:

Thermal stability of theG37 tRNA methyltransferase proteins from Thermotoga maritima and Aquifex aeolicus have been compared using Differential Scanning Calorimetry. It was shown that the Thermotoga protein is remarkably stable and is denatured at temperatures in excess of 100 degrees Centigrade. The Aquifex aeolicus protein was less stable, denaturing broadly at temperatures between 55oC and 100oC. In contrast, the mesophilic E. coli protein was completely denatured at 55oC. Enzymatic activity of the proteins was measured at various temperatures. Both the Thermotoga and Aquifex enzymes are active at ambient temperatures, and display a significant decrease in activity when the temperature is raised above 50oC. This may relate to subtle changes in protein structure causing an effect on the tRNA based assay. Both enzymes contain inter subunit disulfide bonds which might contribute to thermal stability. Assays of the enzymes in the presence of high concentrations of Dithiothreitol (DTT) did not significantly reduce activity at higher temperatures, but did stimulate activity at lower temperatures. Site directed mutagenesis of non -conserved protein sequences within Thermotoga maritima were initiated in order to determine what structures might confer heat stability on the protein. Alanine mutagenesis of lysine residues 103,104 led to reduced catalytic activity, but did increased activity at higher temperatures. Aspartate is the most common residue at the relative position 166 in the variable loop of most TrmD genes. It has been shown that in E. coli this is essential for catalytic activity and possibly the residue which carries out N1 deprotonation on residue G37 in tRNA. In Thermotoga glutamate is present at this position. Alanine mutagenesis of this residue did not eliminate activity suggesting another nearby residue may function in this capacity in the Thermotoga TrmD protein.

APA, Harvard, Vancouver, ISO, and other styles

20

Freithová, Štěpánka. "Charakterizace rašelin." Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2019. http://www.nusl.cz/ntk/nusl-401839.

Full text

Abstract:

Peatlands are considered to be valuable ecosystems on the Planet and play an important role in many processes globally likewise and in the landscape. They are important for maintaining a global biodiversity, play an important role in landscape hydrology and can be a source of drinking water. They can help minimize floods and contribute to climate change mitigation. The peat bogs are one of the largest terrestrial carbon reservoirs. They have been storing carbon for centuries. Many of peat functions are affected due to human activities. It can result into release of greenhouse gases into atmosphere and the excretion of organic carbon into watercourses. The subject of the thesis is understanding of the mechanisms of water binding in peat and exploring possible dependencies within the depth profile of the peatlands using thermal analytical methods, more preciously using thermogravimetry (TG) and differential scanning calorimetry (DSC). The stability of water molecule bridge (WaMB) was investigated. It was found out that the minimum temperature required for WaMB abatement decrease and the whole structure becomes less stable with increasing peat layer depth. Water release processes were evaluated with the meaning of the TGA measurements. A decreasing trend in the degradation of thermolabile substances and an increasing trend in thermostable substances within the peat profile were observed.

APA, Harvard, Vancouver, ISO, and other styles

21

Junior, Virgilio Tattini. "Etapas críticas na liofilização do pericárdio bovino." Universidade de São Paulo, 2008. http://www.teses.usp.br/teses/disponiveis/9/9134/tde-06032009-184216/.

Full text

Abstract:

Em um sistema biológico, a água é responsável por inúmeras reações metabólicas, assim como pela estabilidade estrutural dos constituintes celulares do material. A liofilização é um processo de secagem comumente utilizado para a conservação de materiais biológicos. Entretanto, devido a complexidade do processo e às mudanças térmicas aplicadas ao material, se as etapas da liofilização não forem bem conduzidas, poderão ocorrer danos estruturais irreversíveis. Este projeto tem como objetivo determinar as etapas críticas na liofilização do pericárdio bovino. Através das técnicas de caracterização térmica por calorimetria exploratória diferencial (DSC) e microscopia óptica acoplada a liofilização (FDM) determinaram-se as principais transições de fases do pericárdio bovino visando o aprimoramento do processo e a qualidade final do produto. Após a liofilização do material, utilizando-se diferentes protocolos de congelamento, concluiu-se que o pericárdio bovino apresenta suporte físico suficiente para ser liofilizado acima da temperatura de transição vítrea sem apresentar sinais de colapso estrutural. O protocolo de liofilização utilizando-se congelamento lento com o emprego do tratamento térmico apresentou os melhores resultados de umidade residual, tempo de liofilização e manutenção da estrutura conformacional do colágeno.
In biological system, water is responsible for many metabolic reactions as well as for structural stability of the material cellular constituents. Freeze-drying or lyophilization is a drying technique commonly used for the preservation of biological materials. However, given to the process complexity and to the thermal changes applied to the material, if all freeze-drying steps are not well determined and controlled, irreversible structural damages on the material may occur. The aim of this project is to determine the critical steps on the bovine pericardium tissue freeze-drying. Through two different thermal analysis techniques, Differential Thermal Analysis (DSC) and Freeze-drying microcopy (FDM), it was determined the main phase transitions of bovine pericardium to optimize the freeze-drying process and the quality of dried product. After freeze-drying under different freezing protocols it was concluded that bovine pericardium showed enough physical support to be dried above the glass transition temperature without showing any signs of structural collapse. The freeze-drying protocol using slow freezing rate and annealing showed the best results regarding residual moisture content, freeze-drying time and maintenance of the collagen conformational structure.

APA, Harvard, Vancouver, ISO, and other styles

22

Sgarito, Luca. "Analisi sperimentale degli effetti di temperature elevate sul comportamento strutturale dei rinforzi in FRP." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2008. http://amslaurea.unibo.it/86/.

Full text

Abstract:

In questa tesi si è voluta porre l’attenzione sulla suscettibilità alle alte temperature delle resine che li compongono. Lo studio del comportamento alle alte temperature delle resine utilizzate per l’applicazione dei materiali compositi è risultato un campo di studio ancora non completamente sviluppato, nel quale c’è ancora necessità di ricerche per meglio chiarire alcuni aspetti del comportamento. L’analisi di questi materiali si sviluppa partendo dal contesto storico, e procedendo successivamente ad una accurata classificazione delle varie tipologie di materiali compositi soffermandosi sull’ utilizzo nel campo civile degli FRP (Fiber Reinforced Polymer) e mettendone in risalto le proprietà meccaniche. Considerata l’influenza che il comportamento delle resine riveste nel comportamento alle alte temperature dei materiali compositi si è, per questi elementi, eseguita una classificazione in base alle loro proprietà fisico-chimiche e ne sono state esaminate le principali proprietà meccaniche e termiche quali il modulo elastico, la tensione di rottura, la temperatura di transizione vetrosa e il fenomeno del creep. Sono state successivamente eseguite delle prove sperimentali, effettuate presso il Laboratorio Resistenza Materiali e presso il Laboratorio del Dipartimento di Chimica Applicata e Scienza dei Materiali, su dei provini confezionati con otto differenti resine epossidiche. Per valutarne il comportamento alle alte temperature, le indagini sperimentali hanno valutato dapprima le temperature di transizione vetrosa delle resine in questione e, in seguito, le loro caratteristiche meccaniche. Dalla correlazione dei dati rilevati si sono cercati possibili legami tra le caratteristiche meccaniche e le proprietà termiche delle resine. Si sono infine valutati gli aspetti dell’applicazione degli FRP che possano influire sul comportamento del materiale composito soggetto alle alte temperature valutando delle possibili precauzioni che possano essere considerate in fase progettuale.

APA, Harvard, Vancouver, ISO, and other styles

23

Mu, Wangzhong. "Microstructure and Inclusion Characteristics in Steels with Ti-oxide and TiN Additions." Doctoral thesis, KTH, Tillämpad processmetallurgi, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-162284.

Full text

Abstract:

Non-metallic inclusions in steels are generally considered to be detrimental for mechanical properties. However, it has been recognized that certain inclusions, such as Ti-oxide and TiN, can serve as potent nucleation sites for the formation of intragranular ferrite (IGF) in low-alloy steels. The formation of IGF could improve the toughness of the coarse grained heat affected zone (CGHAZ) of weld metals. Thus, the present thesis mainly focuses on the effect of size of nucleation sites on the IGF formation. Quantitative studies on the composition, size distribution and nucleation probability for each size of the inclusions as well as the area fraction, starting temperature and morphology of an IGF have been carried out. In the present work, the Ti-oxide and TiN powders were mixed with metallic powders. The mixed powders were heated up to the liquid state and cooled with a slow cooling rate of 3.6 ºC/min. These as-cast steels with Ti-oxide and TiN additions were used to simulate the IGF formation in the CGHAZ of weld metals. Specifically, the inclusion and microstructure characteristics in as-cast steels have been investigated. The results show that the nucleant inclusion was identified as a TiOx+MnS phase in steels with Ti2O3 additions and as a TiN+Mn-Al-Si-Ti-O+MnS phase in steels with TiN additions. In addition, the TiOx and TiN phases are detected to be the effective nucleation sites for IGF formation. It is clearly shown that an increased inclusion size leads to an increased probability of IGF nucleation. This probability of IGF nucleation for each inclusion size of the TiOx+MnS inclusions is clearly higher than that of the complex TiN+Mn-Al-Si-Ti-O+MnS inclusions. In addition, the area fraction of IGF in the steels with Ti2O3 additions is larger than that of the steels with TiN additions. This result agrees with the predicted tendency of the probability of IGF nucleation for each inclusion size in the steels with Ti2O3 and TiN additions. In order to predict the effective inclusion size for IGF formation, the critical diameters of the TiO, TiN and VN inclusions, which acted as the nucleation sites of IGF formation, were also calculated based on the classical nucleation theory. The critical diameters of TiO, TiN and VN inclusions for IGF formation were found to be 0.192, 0.355 and 0.810 μm in the present steels. The calculation results were found to be in agreement with the experiment data of an effective inclusion size. Moreover, the effects of the S, Mn and C contents on the critical diameters of inclusions were also calculated. It was found that the critical diameter of the TiO, TiN and VN inclusions increases with an increased content of Mn or C. However, the S content doesn’t have a direct effect on the critical diameter of the inclusions for IGF formation. The probability of IGF nucleation for each inclusion size slightly decreases in the steel containing a higher S content. This fact is due to that an increased amount of MnS precipitation covers the nucleant inclusion surface. In the as-cast experiment, it was noted that an IGF can be formed in steels with Ti2O3 and TiN additions with a cooling rate of 3.6 ºC/min. In order to control the microstructure characteristics, such as the area fraction and the morphology of an IGF, and to investigate the starting temperature of IGF and grain boundary ferrite (GBF) formation, the dynamic transformation behavior of IGF and GBF was studied in-situ by a high temperature confocal laser scanning microscope (CLSM). Furthermore, the chemical compositions of the inclusions and the morphology of IGF after the in-situ observations were investigated by using scanning electron microscopy (SEM), electron backscatter diffraction (EBSD) and electron probe microanalysis (EPMA) which equipped wavelength dispersive spectrometer (WDS). The results show that the area fraction of IGF is larger in the steels with Ti2O3 additions compared to the steels with TiN additions, after the same thermal cycle has been imposed. This is due to that the TiOx phase provides more potent nucleation sites for IGF than the TiN phase does. Also, the area fraction of IGF in the steels is highest after at an intermediate cooling rate of 70 ºC/min, since the competing phase transformations are avoided. This fact has been detected by using a hybrid methodology in combination with CLSM and differential scanning calorimetry (DSC). In addition, it is noted that the morphology of an IGF is refined with an increased cooling rate.

QC 20150325

APA, Harvard, Vancouver, ISO, and other styles

24

Heidrich, Dario, and Michael Gehde. "Kalorimetrische Untersuchung des Kristallisationsverhaltens unter dynamischer Abkühlung." Technische Universität Chemnitz, 2019. https://monarch.qucosa.de/id/qucosa%3A36101.

Full text

Abstract:

Eine kalorimetrische Kristallisationsuntersuchung unter dynamischer Abkühlung ist bisher noch nicht erfolgt, auch weil die klassischen DSC-Messsysteme hierfür thermisch zu träge sind und die Einschwingzeiten zu lang sind. Durch die Weiterentwicklung der Prüftechnik, insbesondere auf dem Gebiet der Hochgeschwindigkeitskalorimetrie, erscheint es jedoch erstmals möglich, das dynamische Abkühlverhalten prozessnah nachbilden zu können und die Auswirkung auf die Kristallisation zu untersuchen. Im Rahmen dieser Arbeit wurde daher versucht die dynamische Abkühlung einer Kunststoffschmelze aus PBT kalorimetrisch in Abhängigkeit der Werkzeugtemperatur und der Bauteilgeometrie nachzubilden, jeweils bei Betrachtung verschiedener Bauteiltiefen. Hierfür wurden numerisch nichtlineare Kühlratenverläufe bestimmt, die im Anschluss durch Segmentierung linearisiert und somit in ein FSC-Programm überführt werden konnten. Anhand der resultierenden Wärmestromverläufe konnte gezeigt werden, dass eine Interpretation der kalorimetrischen Erfassung unter dynamischer Abkühlung möglich ist und der Verlauf der Kristallisation in verschiedenen Bauteiltiefen in Abhängigkeit der weiteren Randbedingungen nachvollzogen werden kann.
A calorimetric investigation of the crystallization of thermoplastics under dynamic cooling has not performed yet, also because the classical DSC measuring systems are thermally too slow for this purpose and the corresponding settling times are too long. However, as a result of the further development of testing technology, especially in the field of high-speed calorimetry, it seems possible to simulate the dynamic cooling behavior of real processing and to investigate its effects on crystallization. In this work the dynamic cooling of a polymer melt was simulated calorimetrically depending on the tool temperature and the part geometry, in each case considering the different cooling behavior of different part depths. Therefore, numerically nonlinear cooling rate profiles were determined, which could then be linearized by segmentation and thus converted into a calorimetric program. On the basis of the resulting heat flow characteristics it could be shown that an interpretation of the calorimetric detection under dynamic cooling is possible and the course of the crystallization in different part depths can be reconstructed in dependence on the further boundary conditions.

APA, Harvard, Vancouver, ISO, and other styles

25

Ramesh, Dinesh. "The Role of Interface in Crystal Growth, Energy Harvesting and Storage Applications." Thesis, University of North Texas, 2020. https://digital.library.unt.edu/ark:/67531/metadc1752367/.

Full text

Abstract:

A flexible nanofibrous PVDF-BaTiO3 composite material is prepared for impact sensing and biomechanical energy harvesting applications. Dielectric polyvinylidene fluoride (PVDF) and barium titanate (BaTiO3)-PVDF nanofibrous composites were made using the electrospinning process based on a design of experiments approach. The ultrasonication process was optimized using a 2k factorial DoE approach to disperse BaTiO3 particles in PVDF solution in DMF. Scanning electron microscopy was used to characterize the microstructure of the fabricated mesh. The FT-IR and Raman analysis were carried out to investigate the crystal structure of the prepared mesh. Surface morphology contribution to the adhesive property of the composite was explained through contact angle measurements. The capacitance of the prepared PVDF- BaTiO3 nanofibrous mesh was a more than 40% increase over the pure PVDF nanofibers. A comparative study of dielectric relaxation, thermodynamics properties and impact analysis of electrospun polyvinylidene fluoride (PVDF) and 3% BaTiO3-PVDF nanofibrous composite are presented. The frequency dependent dielectric properties revealed micro structural features of the composite material. The dielectric relaxation behavior is further supported by complex impedance analysis and Nyquist plots. The temperature dependence of electric modulus shows Arrhenius type behavior. The observed non-Debye dielectric relaxation in electric loss modulus follows a thermally activated process which can be attributed to a small polaron hopping effect. The particle induced crystallization is supported with thermodynamic properties from differential scanning calorimetric (DSC) measurements. The observed increase in piezoelectric response by impact analysis was attributed to the interfacial interaction between PVDF and BaTiO3. The interfacial polarization between PVDF and BaTiO3 was studied using density functional theory calculations and atomic charge density analysis. The results obtained indicates that electrospinning offers a potential way to produce nanofibers with desired crystalline nature which was not observed in molded samples. In addition, BaTiO3 can be used to increase the capacitance, desired surface characteristics of the PVDF nanofibers which can find potential application as flexible piezoelectric sensor mimicking biological skin for use in impact sensing and energy harvesting applications.

APA, Harvard, Vancouver, ISO, and other styles

26

Reed, Jordan Derek. "Ultrasonic Processing of Aluminum 2139 and 7050." Thesis, University of North Texas, 2018. https://digital.library.unt.edu/ark:/67531/metadc1248496/.

Full text

Abstract:

Acoustics is the study of all sound waves, with ultrasound classified as those frequencies above 20,000 Hz. Currently, ultrasound is being used in many industries for a variety of purposes such as ultrasonic imaging, ultrasonic assisted friction stir welding, and ultrasonic spot welding. Despite these uses, the effects of ultrasound on phase stability and resultant mechanical properties has been minimally analyzed. Here we study the impact waves play in ultrasonic welding and design an apparatus to maximize waves entering aluminum alloy samples. Aluminum 2139 and 7050 are used because they are precipitation strengthened by metastable phases so temperature change, and the corresponding phase stability, can greatly impact their strength. Results suggest that the ultrasonic welder primarily imposes a localized temperature spike due to friction, averaging over 200°C in a few seconds, which generally lowers the Vickers hardness due to coarsening or even dissolution of strengthening precipitates. Conversely, the new design increases the Vickers hardness by up to 30% over the initial hardness of approximately 63HV for aluminum 2139 and 83HV for aluminum 7050, respectively, while only increasing the temperature by an average of approximately 10°C. This new design was unable to achieve peak hardness, but the strengthening it achieved in two minutes was equivalent to one month of natural aging. If this system was able to be fine-tuned, it could serve as a quick strengthening process for recently weakened aluminum alloys, such as after friction stir welding.

APA, Harvard, Vancouver, ISO, and other styles

27

Isreb, Mohammad. "Thermal and rheological approaches for the systematic enhancement of pharmaceutical polymeric coating formulations : effects of additives on glass transition temperature, dynamic mechanical properties and coating performance in aqueous and solvent-free coating process using DSC, shear rheometry, dissolution, light profilometry and dynamic mechanical analysis." Thesis, University of Bradford, 2011. http://hdl.handle.net/10454/5527.

Full text

Abstract:

Additives, incorporated in film coating formulations, and their process parameters are generally selected using a trial-and-error approach. However, coating problems and defects, especially those associated with aqueous coating systems, indicate the necessity of embracing a quality-by-design approach to identify the optimum coating parameters. In this study, the feasibility of using thermal and rheological measurements to help evaluate and design novel coating formulations has been investigated. Hydroxypropyl methylcellulose acetate succinate (HPMCAS), an enteric coating polymer, was used as the film forming polymer. Differential Scanning Calorimetry (DSC), Dynamic Mechanical Analysis (DMA), and Parallel Plate Shear Rheometery (PPSR) were used to evaluate the effect of different plasticisers on the performance of HPMCAS. The results illustrate that, for identical formulations, the DSC and DMA methods yielded up to 40% differences in glass transition temperature (Tg) values. Moreover, Tg measured using loss modulus signals were always 20-30 oC less than those measured using tan delta results in DMA testing. Absolute and relative Tg values can significantly vary depending on the geometry of the samples, clamp size, temperature ramping rate and the frequency of the oscillations. Complex viscosity data for different formulations demonstrated a variable shear thinning behaviour and a Tg independent ranking. It is, therefore, insufficient to rely purely on Tg values to determine the relative performance of additives. In addition, complex viscosity results, obtained using both the DMA and PPSR techniques at similar temperatures, are shown to be comparable. The results from both techniques were therefore used to produce continuous master curves for the HPMCAS formulations. Additionally, step strain tests showed that HPMCAS chains do not fully III disentangle after 105 seconds as predicted by the Maxwell model. Finally, in situ aqueous-based coating experiments proved that mixtures of triethyl acetyl citrate and acetylated monoglyceride (TEAC/AMG), even without cooling of the suspension, do not cause blocking of the spray nozzle whereas triethyl citrate (TEC) based formulae did. TEAC (alone or in a combination with AMG) exhibits superior wettability to HPMCAS than TEC/AMG formulations and can be used to enhance the efficiency and film quality of the dry coating process.

APA, Harvard, Vancouver, ISO, and other styles

28

Weißhuhn, J., T. Mark, M. Martin, P. Müller, A. Seifert, and S. Spange. "Ternary organic–inorganic nanostructured hybrid materials by simultaneous twin polymerization." Universitätsbibliothek Chemnitz, 2017. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-220068.

Full text

Abstract:

The acid and base catalyzed simultaneous twin polymerization (STP) of various 2,2′-disubstituted 4H-1,3,2-benzodioxasiline derivatives 2a–d with 2,2′-spirobi[4H-1,3,2-benzodioxasiline] (1) are presented in this paper. The products are nanostructured ternary organic–inorganic hybrid materials consisting of a cross-linked organic polymer, silica and a disubstituted polysiloxane. It can be demonstrated whether and in which extent the copolymerization of the two inorganic fragments of 1 and 2 takes place among the STP and how the molar ratio of the two components determines the structure formation of the resulting hybrid material. Steric and electronic effects of the substituents at the silicon center of 2 on the molecular structure formation and the morphology of the resulting hybrid material were investigated by means of solid state CP MAS 29Si and 13C NMR spectroscopy as well as high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM). The mechanical properties (hardness and Young's modulus) of the hybrid materials were analyzed by means of nanoindentation measurements
Dieser Beitrag ist aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich

APA, Harvard, Vancouver, ISO, and other styles

29

Modi, Sunny J. "Assessing the Feasibility of Poly-(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and Poly-(lactic acid) for Potential Food Packaging Applications." The Ohio State University, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=osu1268921056.

Full text

APA, Harvard, Vancouver, ISO, and other styles

30

Ullrich, Frank. "Untersuchungen von neuartigen Platinkatalysatoren, präpariert unter Nutzung des Biotemplatings, mit miniaturisierten kalorimetrischen Anordnungen." Doctoral thesis, Technische Universitaet Bergakademie Freiberg Universitaetsbibliothek "Georgius Agricola&quot, 2009. http://nbn-resolving.de/urn:nbn:de:bsz:105-0705337.

Full text

Abstract:

Durch Biotemplating mit bakteriellen Oberflächenproteinen, sogenannten S-Layer Proteinen können Metallcluster mit einer definierten Größe und Verteilung auf verschiedensten Oberflächen abgeschieden werden. Damit eröffnet sich die Möglichkeit der gezielten Präparation heterogener Katalysatoren. Mit der Kalorimetrie sollen die katalytischen Eigenschaften von mit Platin belegten S-Layer Präparationen am Beispiel der Kohlenmonoxidoxidation vorgestellt werden. Es werden geträgerte Katalysatoren und katalytisch aktive Schichten untersucht. Der Fokus liegt bei den Katalysatorschüttungen auf der Charakterisierung der katalytischen Eigenschaften und resultierend daraus auf einer Optimierung der Präparation. Für die Untersuchungen der katalytisch aktiven Schichten muss im Unterschied zu den Katalysatorschüttungen eine neuartige miniaturisierte Anordnung auf der Basis von Pt 1000 Widerstandsthermometern entwickelt werden. Dabei werden auch Parameter, die für eine spätere sensorische Applikation von Bedeutung sind, untersucht.

APA, Harvard, Vancouver, ISO, and other styles

31

Larsericsdotter, Helén. "Macromolecules at Interfaces." Doctoral thesis, Uppsala University, Centre for Surface Biotechnology, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-4661.

Full text

Abstract:

In this thesis, the structure and stability of globular proteins adsorbed onto nanometer-sized hydrophilic silica particles were investigated using differential scanning calorimetry (DSC), hydrogen/deuterium exchange (HDX), and mass spectrometry (MS). The adsorption process itself was characterized with fluorescence and absorption spectroscopy and surface plasmon resonance (SPR). The combination of these methods offered a unique insight into adsorption-induced changes within proteins related to their adsorption characteristics. DSC contributed with thermodynamic information on the overall structural stability within the protein population. HDX in combination with MS contributed information on the structure and stability of adsorbed proteins with focus on changes within the secondary structure elements. In order to increase the structural resolution in this part of the investigation, proteolysis was performed prior to the MS analyzing step. Knowledge on the protein adsorption process was utilized in a practical approach called ligand fishing. In this approach, SPR was used to monitor the chip-based affinity purification of a protein with MS used for protein identification.

Adsorption isotherms revealed that electrostatic interactions play an important role in the adsorption of proteins to hydrophilic surfaces. DSC investigation revealed that the thermal stability of proteins reduces with increasing electrostatic attraction between the protein and the surface and that this effect diminishes at higher surface coverage. The mass-increase due to exchange between protein hydrogen atoms and deuterium atoms in solution was investigated as a function of time. This gave insight into adsorption-induced changes in the structural stability of proteins. By combining DSC and HDX-MS, it was possible to differentiate between adsorption-induced changes in the secondary and tertiary structure. Additionally, if limited proteolysis was performed, the investigations gave insight into the orientation and protein segment specific changes in the stability of proteins adsorbed to silica surfaces. The adsorption of proteins to silica particles also provided the basis for a new experimental design that allows handling of minute amounts of proteins in a ligand fishing application, as used in the field of functional proteomics.

APA, Harvard, Vancouver, ISO, and other styles

32

Allain, Vanessa. "Bicouches lipidiques modèles pour l'étude des interactions de substances exogènes avec les membranes biologiques : exemple d'un principe actif squalénisé, le ddC-SQ." Thesis, Paris 11, 2011. http://www.theses.fr/2011PA114843.

Full text

Abstract:

Les principes actifs, dans leur chemin vers leur cible thérapeutique, rencontrent une ou plusieurs membranes biologiques (plasmique, intracellulaire). Les interactions entre un principe actif et ces membranes sont importantes : d’une part les propriétés pharmacocinétiques de la molécule active (transport, distribution, accumulation) en dépendent, d’autre part le principe actif peut modifier les propriétés structurales des membranes. L’étude de ces interactions est rendue difficile par la complexité des membranes en termes de composition (lipidique et protéique) et de structure (hétérogénéité de l’organisation). Par conséquent, l’utilisation de systèmes modèles simplifiés est nécessaire. Au cours de ce travail de thèse nous avons cherché à réaliser des bicouches lipidiques modèles dont les caractéristiques se rapprochaient de celles des membranes biologiques en complexifiant progressivement leur composition lipidique. Nous avons ensuite étudié l’interaction d’une molécule anti-VIH squalénisée, le ddC-SQ, avec nos modèles de membrane.Un des rôles essentiels des membranes biologiques étant de séparer deux milieux aqueux de composition ionique différente, nous avons étudié dans un premier temps l’influence de la nature du milieu d’hydratation sur les propriétés thermiques et structurales des bicouches lipidiques. A pH physiologique, nous avons mis en évidence que seuls les ions divalents (à faibles concentrations) induisaient de profondes modifications structurales en provoquant la formation de vésicules unilamellaires dans les systèmes simples. Une seconde partie de nos travaux a consisté à étudier l’interaction d’un antiviral squalénisé, le ddC-squalène (ddC-SQ), avec nos différentes bicouches modèles. Cet analogue nucléosidique a été associé de manière covalente à une chaîne de squalène afin d’améliorer ses propriétés pharmacocinétiques. Cette squalénisation confère à la molécule la capacité de s’auto-assembler en nanoparticules présentant une structure cubique bicontinue. Les résultats obtenus ont révélé que le principe actif squalénisé interagissait fortement avec les membranes à l’inverse de la molécule native. L’organisation structurale des systèmes modèles est profondément modifiée par l’insertion du ddC-SQ, ce qui pourrait influer sur l’activité du composé
Drugs must cross one or more biological membranes (plasma membrane, intracellular membrane) to reach their intracellular target. Interactions between drug and membranes play a significant role in the pharmacokinetic properties of drug such as transport, distribution, accumulation. Moreover, drugs may alter membrane properties. The complexity of the composition (protein and lipid) and the structural properties (heterogeneity) of membranes leads to a difficult investigation of these interactions. Consequently, use of simplified model membranes is needed. In this work, model lipid bilayer systems in which the lipid organization mimics the arrangement of lipids in natural membrane have been developed. In this way, the complexity of lipid composition mixtures has been progressively increased. The primary function of membrane is to physically separate aqueous compartments from their surroundings. The intracellular and extracellular fluids differ in ionic composition. This study firstly consists to estimate the influence of aqueous medium nature on the thermodynamic and structural properties of these model membranes.In physiological conditions (pH 7.4, ionic strength 150 mM), the most significant change was obtained in the presence of divalent ions. Markedly change in lipid organization was observed and the formation of unilamellar vesicles has been evidenced (at low concentrations) in simple model bilayers. Interactions of an antiretroviral nucleoside analogue, the SQddC, with lipid systems constitute the second part of our work. Squalene has been covalently coupled to ddC, in order to improve its therapeutic index. Squalenoylation leads to amphiphilic prodrugs which self-organize as nanoparticles. ddC weakly interacts with lipid membranes while SQddC-SQ can insert into membranes between hydrophobic alkyl chains and induce disruption of lipid organization. Consequently, the efficacy and/or toxicity of this drug could change

APA, Harvard, Vancouver, ISO, and other styles

33

Thompson, M. "Matrix effects in differential scanning calorimetry." Thesis, Open University, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.281223.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

Altun, Naci Emre. "Beneficiation Of Himmetoglu And Beypazari Oil Shales By Flotation And Their Thermal Characterization As An Energy Source." Phd thesis, METU, 2006. http://etd.lib.metu.edu.tr/upload/2/12606990/index.pdf.

Full text

Abstract:

Processing of Bolu-Himmetoglu (Type I Kerogen) and Ankara-Beypazari (Type II Kerogen) oil shales by flotation techniques were investigated for achieving clean solid fuel substitutes. Materials characterization was done through mineralogical, XRD and FTIR analyses. Flotation responses of the samples were tested with non-ionizing and ionizing collectors of cationic and anionic types. The effects of the collector dosage and pulp pH on cleaning were determined. Other important flotation parameters, conditioning time, flotation time, pulp density, particle size and frother dosage were encountered using a statistical approach, through a full two level factorial experimental design. An advanced flotation procedure, assisted by ultrasonic application, was developed for further improvement in flotation performance. The effects of cleaning on thermal characterstics and combustion kinetics were evaluated with Differential Scanning Calorimetry and ASTM methods while the changes in the emission profiles were assessed using Effluent Gas Analysis. Himmetoglu sample was characterized as a carbonate and organic rich humic oil shale with XRD and FTIR analyses while Beypazari oil shale involved significant carbonate and clay minerals and exhibited a fulvic character with a poor organics content. Reverse flotation with amine acetates provided the most effective means of cleaning with Himmetoglu oil shale. Ash was decreased from 34.76 % to 23.52 % with a combustible recovery of 83.57 % using 800 g/ton Flotigam CA at natural pH and the calorific value increased from 4312 kcal/kg to 5010 kcal/kg. Direct flotation with amines was most effective for Beypazari oil shale cleaning. Using Armoflote 17, ash was reduced from 69.88 % to 53.10 % with 58.64 % combustible recovery using 800 g/ton Armoflote 17 at natural pulp pH and the calorific value of the sample increased from 876 kcal/kg to 2046 kcal/kg. Following optimization, ash of Himmetoglu oil shale decreased to 16.81 % with 84.10 % combustible recovery and calorific value increased to 5564 kcal/kg. For Beypazari oil shale ash decreased to % 48.42 with 59.17 % combustible recovery and the calorific value increased to 2364 kcal/kg. Ultrasonic pre-treatment before flotation further decreased the ash of Himmetoglu sample to 11.82 % with 82.66 % combustible recovery at 15 minutes pre-conditioning time and 50 % power level. For Beypazari oil shale, ash decreased to 34.76 % with 64.78 % combustible recovery after 15 minutes pre-treatment time at 70 % power level. Comparative XRD spectra and SEM analyses revealed that the extent of mineral matter removal relied on the flotation performance. The thermal indicators considerably improved after cleaning and the extent of improvement increased with a decrease in the ash of the concentrates. Kinetic analysis showed the favorable effect of inorganics removal on the effectiveness and easiness of combustion and activation energies decreased after cleaning for both oil shales. The contributions of cleaning on the effectiveness of combustion were also revealed by the increases in the emission rates and total CO2 and CO emission amounts. CO2 emissions due to mineral matter decomposition and harmful SO2 emissions apparently decreased as a consequence of the cleaning of the undesired inorganic contituents and potentially cleaning components. Results of the cleaning and thermal analysis sudies revealed that it was possible to achieve a clean energy source alternative from oil shales through flotation and a significant potential can be anticipated for future use of oil shales as a cost effective and environmental friendly solid fuel substitute in view of Turkey&
#8217
s great oil shale reserves.

APA, Harvard, Vancouver, ISO, and other styles

35

Nikolopoulos, Christos. "Mathematical modelling of modulated-temperature differential scanning calorimetry." Thesis, Heriot-Watt University, 1997. http://hdl.handle.net/10399/659.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Dumitrescu, Oana Roxana. "Simultaneous differential scanning calorimetry : Fourier Transform infrared spectroscopy." Thesis, Cranfield University, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.421231.

Full text

APA, Harvard, Vancouver, ISO, and other styles

37

Jiang, Zhong. "Temperature modulated differential scanning calorimetry : modelling and applications." Thesis, University of Aberdeen, 2000. http://digitool.abdn.ac.uk/R?func=search-advanced-go&find_code1=WSN&request1=AAIU603190.

Full text

Abstract:

The research described in this thesis focused on the TMDSC technique with respect to both theoretical problems and applications. Theoretically, modelling work has been performed to address the effects of heat transfer in the measuring cell on both dynamic and quasi-isothermal TMDSC experiments. The problems of heat transfer generally influence the measured complex heat capacity and phase angle values, but eventually affect the precise measurements of other frequency dependent quantities such as the in-phase and out-of-phase heat capacities. A procedure has been suggested to correct the measured phase angle obtained by dynamic TMDSC using the scaled complex heat capacity trace (Chapter 3). The modulation frequency dependence of the instrumental phase angle has been fully investigated using more realistic models in terms of various heat transfer interface qualities, sample properties and sensor properties. In these models, it is emphasised that the measured temperatures are the sensor temperatures rather than the sample temperatures, thus, the contributions of the sensor's properties to the heat transfer are, for the first time, separated from the overall effects (Chapter 4 and Chapter 5). The consequent effects of heat transfer on the sample's heat capacity measurements are investigated based on the models suggested (Chapter 6). All the modelling results are compared with the corresponding experimental data obtained by ADSC (Mettler-Toledo Ltd) and they are in good agreement. Ripples and fluctuations which appear on the experimental signals during the glass transition and cold crystallisation transition have been simulated using* a simple model in which the period of the modulation signals changes with the time during the transitions, and then, been shown to be artefacts of the Fourier transformation process used by TMDSC evaluations (Chapter 7). The applications of TMDSC to both research and commercial samples are reported in terms of differing either the experimental conditions or the thermal history of the sample. Separating of time dependent kinetic processes from the time independent dynamic processes has been applied on the studies of the glass transition (for polycarbonate and poly(ethylene terephthalate)), the cold crystallisation (for poly(ethylene terephthalate)), the melting transition (for poly(ethylene terephthalate) and lead/tin alloys), the clearing transition of a liquid crystal polymer, and the vitrification of an epoxy resin under quasi-isothermal conditions. The main conclusion drawn from these studies is that the in-phase heat capacity is greatly influenced by the frequency of the temperature modulations even when the underlying heating (or cooling) rate remains the same. This strongly implies that the sample undergoes different structural change under different modulation conditions for the melting transition and clearing transition, but not for the glass transition and cold crystallisation. However, the interpretations of the in-phase heat capacity and out-of- phase heat capacity still need to be clarified. The detection of the glass transition and clearing point for the liquid crystal polymers, and the determination of wax appearance temperature for crude oils, show the ability of TMDSC for combining the sensitivity of a measurement at high instantaneous heating or cooling rates with the resolution obtained by measuring at a low underlying heating or cooling rates. The work on the isothermal curing of the epoxy resins displays the ability of TMDSC on measuring the heat capacity of the sample and its variation under the quasi-isothermal conditions. The frequency dependent complex heat capacity during the glass transition provides a window to measure the apparent activation energy of the transition, which is different, in some extent, from the window used by conventional DSC. The results are correlated by a shift factor. Some shortcomings of TMDSC, however, have been noticed in both modelling and application work. Firstly, any experiments for the purpose of either understanding or the quantitative measurements of TMDSC output quantities should be performed under carefully selected conditions which can satisfy the linear response assumption. Secondly, some signals in particular those associated with kinetic processes may not be fully sampled by TMDSC due to the limit of the observing window of a modulation. Thirdly, when the sensitivity is improved on TMDSC by separating the kinetics processes and noises from the dynamic processes, the TMDSC evaluation procedure introduces mathematical artefacts into the output signals. As a consequence, it is preferable to include as many temperature modulations as possible within any transition being studied in order to obtain good quality experimental signals by eliminating or minimising these artefacts, which, however, is not an easy task for some very abrupt transitions such as melting of metals.

APA, Harvard, Vancouver, ISO, and other styles

38

Schellenberg, René. "Hydrierung von Bortrichlorid mit molekularem Wasserstoff in Gegenwart von Aminen als Hilfsbasen." Doctoral thesis, Technische Universitaet Bergakademie Freiberg Universitaetsbibliothek "Georgius Agricola", 2011. http://nbn-resolving.de/urn:nbn:de:bsz:105-qucosa-68938.

Full text

Abstract:

In dieser Arbeit wurde die Möglichkeit untersucht, Bortrihalogenide mit Wasserstoff unter milden Bedingungen (T < 100 °C, p(H2) < 50 bar) zu hydrieren. Um eine Triebkraft für die thermodynamisch ungünstige Reaktion zu erhalten, wurden Amine als Hilfsbasen zugesetzt, welche den bei der Reaktion entstehenden Halogenwasserstoff als Ammoniumsalz binden und damit das Reaktionsgleichgewicht in Richtung der Produkte verschieben. Es wurden dafür verschiedene Amin-Boran bzw. Amin-HCl Addukte synthetisiert und mittels IR, NMR und DSC charakterisiert. Bei den anschließenden Hydrierungsversuchen wurden verschiedene Katalysatoren auf ihre Eignung getestet und weiterentwickelt. Unterstützt wurden die experimentellen Arbeiten durch Berechnungen mit Gaussian 03. IR- und NMR-Spektren vieler Addukte wurden berechnet und freie Reaktionsenthalpien der Hydrierung in Abhängigkeit des verwendeten Amins und Borhalogenids bestimmt. Mögliche Übergangszustände wurden diskutiert und ihre Aktivierungsenergien ermittelt.

APA, Harvard, Vancouver, ISO, and other styles

39

Kaßner, Lysann. "Stickstoffhaltige Monomere zur Herstellung von Hybridmaterialien." Doctoral thesis, Universitätsbibliothek Chemnitz, 2015. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-171321.

Full text

Abstract:

In der vorliegenden Arbeit wurden stickstoffhaltige Monomere ausgehend von aromatischen Aminen oder Lactamen durch Umsetzung mit Chlorsilanen synthetisiert. Die so erhaltenen Derivate wurden mit Hilfe spektroskopischer und thermischer Analysenmethoden umfassend charakterisiert. Auf Basis der stickstoffhaltigen Monomere wurden über unterschiedliche Synthesestrategien organisch-anorganische, nanostrukturierte Hybridmaterialien hergestellt. Durch die thermisch induzierte Zwillingspolymerisation der Monomere 2,2‘-Spirobi[3,4-dihydro-1H-1,3,2-benzodiazasilin] und 1,1’,4,4‘-Tetrahydro-2,2‘-spirobi[benzo[d][1,3,2]-oxazasilin] gelang es, Hybridmaterialien bestehend aus Polyanilin-Formaldehyd-Harzen und Polysilazanen bzw. Siliciumdioxid unter Variation der Reaktionstemperatur herzustellen. Die Untersuchung der entstandenen Materialien erfolgte mittels spektroskopischer Methoden. Die Lactam-Monomere wurden durch die Zugabe von Aminocarbonsäuren zu Polyamid 6/SiO2- bzw. Polysiloxan-Kompositen umgesetzt. Hier stand die Ermittlung der molekularen Struktur, wie auch die Bestimmung des thermischen Verhaltens und der Homogenität der Materialien im Vordergrund. Es konnte gezeigt werden, dass die Synthese der thermoplastischen Kompositmaterialien auch in vergrößertem Maßstab reproduzierbar ist und die Produkte zudem zu Folien extrudierbar sind
In the present work nitrogen-containing monomers have been synthesized by reactions of silicon tetrachloride with amines or lactames and were characterized by different spectroscopic and thermal analysis methods. The twin monomers 2,2‘-spirobi[3,4-dihydro-1H-1,3,2-benzodiazasiline] and 1,1’,4,4‘-tetrahydro-2,2‘-spirobi[benzo[d][1,3,2]¬oxazasiline] can be converted to hybrid materials containing polyaniline-formaldehyde resins and polysilazane or SiO2 by thermal induced twin polymerization under variation of the reaction temperature. The obtained nano composites were investigated by spectroscopic methods and electron microscopy. The lactam containing monomers were polymerized to polyamide 6/SiO2-composites by addition of aminocarbonic acids and -caprolactam. The analysis of the molecular structure as well as the investigation of the thermal behavior and the homogeneity of materials was emphasized. It could be shown, that the synthesis can be performed reproducible. Furthermore, it is possible to extrude the thermoplastic composite materials to films

APA, Harvard, Vancouver, ISO, and other styles

40

Damadzadeh, Behzad, and Hamideh Jabari. "Biodegradable Composites : Processing of thermoplastic polymers for medical applications." Thesis, Högskolan i Borås, Institutionen Ingenjörshögskolan, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-19329.

Full text

Abstract:

Despite the recent development in PLA and PLGA based medical devices, there are still needs to further improve the mechanical performance of bioresorbable medical implants and their bioactivity. This is normally done by optimizing the filler compositions in selected groups ofbiodegradable polymer matrices. In this study, the effects of various filler levels on mechanical strength and thermal properties of PLA and PLGA composites were investigated. Composites containing different dosage of osteoconductive HAp with various particles size (0-5μm, 0-50 μm, nano size), β-TCP, bioactive glass and biodegradable Poly-L-lactide and Polylactide-glycolic acid was manufactured with melt blending, using a twin-screw extruder.The samples were investigated by Differential Scanning Calorimetry (DSC), thermo gravimetric analysis (TGA), Scanning Electron Microscopy (SEM), viscometer, three points bending machine, and Optical Microscopy (OM). The Extruder produced a porous profile. The result from TGA and SEM indicated that there was homogenous filler dispersion in the matrix after compounding.The result from DSC and Viscometer shows that there was some degradation duringcompounding. Mechanical properties of composites were modified by adding filler to matrix. The addition of Bioactive glass, as a filler, increases the degradation of the polymer matrix. The best filler that was applied is 0-5μm and nano HAp. Also in in-vitro degradation part of this thesis work, the effects of calcium phosphate materialsare investigated on degradation process.

APA, Harvard, Vancouver, ISO, and other styles

41

Löschner, Tina. "Synthese nanostrukturierter, organisch-anorganischer Hybridmaterialien über Zwillingspolymerisation." Doctoral thesis, Universitätsbibliothek Chemnitz, 2013. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-119796.

Full text

Abstract:

Im Fokus dieser Arbeit stand die Methode Zwillingspolymerisation zur Synthese organisch-anorganischer Hybridmaterialien. Die simultane Zwillingspolymerisation wird als neues Konzept zur gezielten Herstellung homogener, nanostrukturierter Hybridmaterialien unterschiedlicher Zusammensetzung vorgestellt. Hierfür wurden die Zwillingsmonomere 2,2’-Spirobi[4H-1,3,2-benzodioxasilin] und 2,2 Dimethyl-4H-1,3,2-benzodioxasilin in einem Arbeitsschritt gemeinsam polymerisiert. Die erhaltenen Phenolharz-Siliciumdioxid/Dimethylsiloxan-Hybridmaterialien weisen aufgrund einstellbarer Syntheseparameter unterschiedliche Eigenschaftsprofile auf, die systematisch analysiert wurden. Die Charakterisierung der Produkte erfolgte mit Hilfe der Festkörper-NMR-Spektroskopie, Elektronenmikroskopie, DSC, TGA-MS, sowie durch Extraktionsversuche und die Erzeugung und Analyse poröser Materialien. Neben der simultanen Zwillingspolymerisation wird die Synthese, Charakterisierung und thermisch induzierte Polymerisation literaturunbekannter Silicium-Spiroverbindungen mit einfach- oder zweifach substituierter Salicylalkohol-Einheit beschrieben. Hierbei wurden nanostrukturierte Hybridmaterialien mit teils hohem löslichen Anteil erhalten. Die Produktbildung wird in Abhängigkeit von der Entstehung und Weiterreaktion gefundener Chinonmethid-Strukturen diskutiert.

APA, Harvard, Vancouver, ISO, and other styles

42

Sharma, Varun. "Evaluation of novel metalorganic precursors for atomic layer deposition of Nickel-based thin films." Master's thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2015. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-166627.

Full text

Abstract:

Nickel und Nickel (II) -oxid werden in großem Umfang in fortgeschrittenen elektronischen Geräten verwendet. In der Mikroelektronik-Industrie wird Nickel verwendet werden, um Nickelsilizid bilden. Die Nickelmono Silizid (NiSi) wurde als ausgezeichnetes Material für Source-Drain-Kontaktanwendungen unter 45 nm-CMOS-Technologie entwickelt. Im Vergleich zu anderen Siliziden für die Kontaktanwendungen verwendet wird NiSi wegen seines niedrigen spezifischen Widerstand, niedrigen Kontaktwiderstand, relativ niedrigen Bildungstemperatur und niedrigem Siliziumverbrauchs bevorzugt. Nickel in Nickelbasis-Akkus und ferromagnetischen Direktzugriffsspeicher (RAMs) verwendet. Nickel (II) oxid wird als Transistor-Gate-Oxid und Oxid in resistive RAM genutzt wird. Atomic Layer Deposition (ALD) ist eine spezielle Art der Chemical Vapor Deposition (CVD), das verwendet wird, um sehr glatte sowie homogene Dünnfilme mit hervorragenden Treue auch bei hohen Seitenverhältnissen abzuscheiden. Es basiert auf selbstabschließenden sequentielle Gas-Feststoff-Reaktionen, die eine präzise Steuerung der Filmdicke auf wenige Angström lassen sich auf der Basis. Zur Herstellung der heutigen 3D-elektronische Geräte, sind Technologien wie ALD erforderlich. Trotz der Vielzahl von praktischen Anwendungen von Nickel und Nickel (II) -oxid, sind einige Nickelvorstufen zur thermischen basierend ALD erhältlich. Darüber hinaus haben diese Vorstufen bei schlechten Filmeigenschaften führte und die Prozesseigenschaften wurden ebenfalls begrenzt. Daher in dieser Masterarbeit mussten die Eigenschaften verschiedener neuartiger Nickelvorstufen zu bewerten. Alle neuen Vorstufen heteroleptische (verschiedene Arten von Liganden) und Komplexe wurden vom Hersteller speziell zur thermischen basierend ALD aus reinem Nickel mit H 2 als ein Co-Reaktionsmittel gestaltet. Um die neuartige Vorläufer zu untersuchen, wurde eine neue Methode entwickelt, um kleine Mengen in einer sehr zeitsparend (bis zu 2 g) von Ausgangsstoffen zu testen. Diese Methodologie beinhaltet: TGA / DTA-Kurve analysiert der Vorstufen, thermische Stabilitätstests in dem die Vorläufer (<0,1 g) wurden bei erhöhter Temperatur in einer abgedichteten Umgebung für mehrere Stunden wurde die Abscheidung Experimenten und Film Charakterisierungen erhitzt. Die Abscheidungen wurden mit Hilfe der in situ Quarzmikrowaage überwacht, während die anwendungsbezogenen Filmeigenschaften, wie chemische Zusammensetzung, physikalische Phase, Dicke, Dichte, Härte und Schichtwiderstand wurden mit Hilfe von ex situ Messverfahren untersucht. Vor der Evaluierung neuartiger Nickelvorstufen ein Benchmark ALD-Prozess war vom Referenznickelvorläufer (Ni (AMD)) und Luft als Reaktionspartner entwickelt. Das Hauptziel der Entwicklung und Optimierung von solchen Benchmark-ALD-Prozess war es, Standard-Prozessparameter wie zweite Reaktionspartner Belichtungszeiten, Argonspülung Zeiten, gesamtprozessdruck, beginnend Abscheidungstemperatur und Gasströme zu extrahieren. Diese Standard-Prozessparameter mussten verwendet, um die Prozessentwicklung Aufgabe (das spart Vorläufer Verbrauch) zu verkürzen und die Sublimationstemperatur Optimierung für jede neuartige Vorstufe werden. Die ALD Verhalten wurde in Bezug auf die Wachstumsrate durch Variation des Nickelvorläuferbelichtungszeit, Vorläufer Temperatur und Niederschlagstemperatur überprüft
Nickel and nickel(II) oxide are widely used in advanced electronic devices . In microelectronic industry, nickel is used to form nickel silicide. The nickel mono-silicide (NiSi) has emerged as an excellent material of choice for source-drain contact applications below 45 nm node CMOS technology. As compared to other silicides used for the contact applications, NiSi is preferred because of its low resistivity, low contact resistance, relatively low formation temperature and low silicon consumption. Nickel is used in nickel-based rechargeable batteries and ferromagnetic random access memories (RAMs). Nickel(II) oxide is utilized as transistor gate-oxide and oxide in resistive RAMs. Atomic Layer Deposition (ALD) is a special type of Chemical Vapor Deposition (CVD) technique, that is used to deposit very smooth as well as homogeneous thin films with excellent conformality even at high aspect ratios. It is based on self-terminating sequential gas-solid reactions that allow a precise control of film thickness down to few Angstroms. In order to fabricate todays 3D electronic devices, technologies like ALD are required. In spite of huge number of practical applications of nickel and nickel(II) oxide, a few nickel precursors are available for thermal based ALD. Moreover, these precursors have resulted in poor film qualities and the process properties were also limited. Therefore in this master thesis, the properties of various novel nickel precursors had to be evaluated. All novel precursors are heteroleptic (different types of ligands) complexes and were specially designed by the manufacturer for thermal based ALD of pure nickel with H 2 as a co-reactant. In order to evaluate the novel precursors, a new methodology was designed to test small amounts (down to 2 g) of precursors in a very time efficient way. This methodology includes: TGA/DTA curve analyses of the precursors, thermal stability tests in which the precursors (< 0.1 g) were heated at elevated temperatures in a sealed environment for several hours, deposition experiments, and film characterizations. The depositions were monitored with the help of in situ quartz crystal microbalance, while application related film properties like chemical composition, physical phase, thickness, density, roughness and sheet resistance were investigated with the help of ex situ measurement techniques. Prior to the evaluation of novel nickel precursors, a benchmark ALD process was developed from the reference nickel precursor (Ni(amd)) and air as a co-reactant. The main goal of developing and optimizing such benchmark ALD process was to extract standard process parameters like second-reactant exposure times, Argon purge times, total process pressure, starting deposition temperature and gas flows. These standard process parameters had to be utilized to shorten the process development task (thus saving precursor consumption) and optimize the sublimation temperature for each novel precursor. The ALD behaviour was checked in terms of growth rate by varying the nickel precursor exposure time, precursor temperature and deposition temperature

APA, Harvard, Vancouver, ISO, and other styles

43

Gouni, Sreeja Reddy. "Cure Kinetics of Benzoxazine/Cycloaliphatic Epoxy Resin by Differential Scanning Calorimetry." Thesis, California State University, Long Beach, 2018. http://pqdtopen.proquest.com/#viewpdf?dispub=10689461.

Full text

Abstract:

Understanding the curing kinetics of a thermoset resin has a significant importance in developing and optimizing curing cycles in various industrial manufacturing processes. This can assist in improving the quality of final product and minimizing the manufacturing-associated costs. One approach towards developing such an understanding is to formulate kinetic models that can be used to optimize curing time and temperature to reach a full cure state or to determine time to apply pressure in an autoclave process. Various phenomenological reaction models have been used in the literature to successfully predict the kinetic behavior of a thermoset system. The current research work was designed to investigate the cure kinetics of Bisphenol-A based Benzoxazine (BZ-a) and Cycloaliphatic epoxy resin (CER) system under isothermal and nonisothermal conditions by Differential Scanning Calorimetry (DSC). The cure characteristics of BZ-a/CER copolymer systems with 75/25 wt% and 50/50 wt% have been studied and compared to that of pure benzoxazine under nonisothermal conditions. The DSC thermograms exhibited by these BZ-a/CER copolymer systems showed a single exothermic peak, indicating that the reactions between benzoxazine-benzoxazine monomers and benzoxazine-cycloaliphatic epoxy resin were interactive and occurred simultaneously. The Kissinger method and isoconversional methods including Ozawa-Flynn-Wall and Freidman were employed to obtain the activation energy values and determine the nature of the reaction. The cure behavior and the kinetic parameters were determined by adopting a single step autocatalytic model based on Kamal and Sourour phenomenological reaction model. The model was found to suitably describe the cure kinetics of copolymer system prior to the diffusion-control reaction. Analyzing and understanding the thermoset resin system under isothermal conditions is also important since it is the most common practice in the industry. The BZ-a/CER copolymer system with 75/25 wt% ratio which exhibited high glass transition temperature compared to polybenzoxazine was investigated under isothermal conditions. The copolymer system exhibited the maximum reaction rate at an intermediate degree of cure (20 to 40%), indicating that the reaction was autocatalytic. Similar to the nonisothermal cure kinetics, Kamal and Sourour phenomenological reaction model was adopted to determine the kinetic behavior of the system. The theoretical values based on the developed model showed a deviation from the obtained experimental values, which indicated the change in kinetics from a reaction-controlled mechanism to a diffusion-controlled mechanism with increasing reaction conversion. To substantiate the hypothesis, Fournier et al?s diffusion factor was introduced into the model, resulting in an agreement between the theoretical and experimental values. The changes in cross-linking density and the glass transition temperature (Tg) with increasing epoxy concentration were investigated under Dynamic Mechanical Analyzer (DMA). The BZ-a/CER copolymer system with the epoxy content of less than 40 wt% exhibited the greatest Tg and cross-linking density compared to benzoxazine homopolymer and other ratios.

APA, Harvard, Vancouver, ISO, and other styles

44

Bright, Andrew G. "Mechanistic Insights into the Stabilisation of Biopharmaceuticals using Glycine Derivatives. The Effect of Glycine Derivatives on the Crystallisation, Physical Properties and Behaviour of Commonly used Excipients to Stabilise Antigens, Adjuvants and Proteins in the Solid State." Thesis, University of Bradford, 2015. http://hdl.handle.net/10454/15943.

Full text

Abstract:

This dissertation has focused on studying the effect of four glycine derivatives on the solid state properties of mannitol, glycine, and sucrose when freeze dried into blended mixtures. The primary goal was to assess their value for use in the stabilisation of vaccines in the solid state, by examining key physical and chemical characteristics, which have been documented to be beneficial to the stabilisation of biopharmaceutical formulations. The novel excipients; dimethyl glycine, and trimethyl glycine, were shown to retard the crystallisation and increase the overall glass transition temperature, of mannitol, when freeze dried as evidenced by DSC and Powder X-ray diffraction. Mannitol’s glass transition temperature increased from 100C to 12.650C and 13.610C when mixed with methyl-glycine and dimethyl glycine respectively. The glycine derivatives did not show the same effect on sucrose which remained amorphous regardless of the concentration of the other excipient. The different behaviour with the sucrose system was thought to be due to relatively high glass transition temperature of sucrose. Conversely glycine remained highly crystalline due it’s relatively low glass transition temperature. The novel excipient formulations were also assessed for their effect on the aggregation of the adjuvant aluminium hydroxide when freeze dried by Dynamic Light Scattering (DLS).The formulations containing the glycine derivatives all caused a decrease in the aggregation size of the adjuvant from ~26 μm, to 185 nm in the presence of methyl glycine. The effects of lysozyme and viral antigen on the adjuvants were also examined showing that the addition of the virus did not affect the size of the aggregates formed, however lysozyme showed significant decreases in the aggregates formed. Examination of the freezing method were also made showing that faster freezing rates produced smaller aggregates of the adjuvant. When investigating the rate at which the excipients lost water during secondary drying there was evidence of the formation of hydrates of glycine, trimethyl glycine, and mannitol has shown that the glycine derivatives have attributes which would be beneficial in stabilising vaccines in the solid state when freeze dried.

APA, Harvard, Vancouver, ISO, and other styles

45

Song, Mo. "Applications of modulated-temperature differential scanning calorimetry to multi-component polymer materials." Thesis, Lancaster University, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.337256.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Belkharchouche, Mohamed. "Pressure differential scanning calorimetry studies and its relevance to in-situ combustion." Thesis, University of Salford, 1990. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.280747.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Martin, A. C. S. "Comb shaped polymer-salt systems : A.C. conductivity and differential scanning calorimetry studies." Thesis, University of Stirling, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.382751.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

McConnell, Brendan Neil. "Fragment-based approaches to targeting EthR from mycobacterium tuberculosis." Thesis, University of Cambridge, 2019. https://www.repository.cam.ac.uk/handle/1810/290255.

Full text

Abstract:

Tuberculosis affects millions of people worldwide every year. The current treatment for TB is divided into a regimen of both first- and second-line drugs, where first-line treatments are more tolerated and require shorter treatment lengths. With rising levels of resistance, alternative treatment regimes are urgently needed to fight this disease. Ethionamide, a second-line drug is administered as a prodrug which is activated in vivo by the enzyme EthA, which is in turn regulated by EthR. The disruption of the action of EthR could lead to novel therapeutics which could enhance the efficacy of ethionamide, and raise it to a first-line treatment. The work reported in this thesis examines the elaboration of three chemical scaffolds using fragment-based approaches to develop novel inhibitors capable of disrupting the EthR-DNA interaction. The first scaffold, 5-(furan-2-yl)isoxazole was investigated by fragment-merging approaches and produced compounds with the best of these having a KD of 7.4 uM. The second scaffold, an aryl sulfone was elaborated using fragment-merging strategies. This led to several modifications of the fragment, leading to several variants with KDs around 20 uM. With both of these series the affinity could not be improved below 10 uM and due to the synthetic complexity a further scaffold was prioritised. The third scaffold was explored was a 4-(4-(trifluoromethyl)phenyl)piperazine using fragmentgrowing from the NH of the piperazine to probe deeper into the EthR binding pocket. In addition to this, SAR around the 4-(trifluoromethyl)phenyl group was assessed to explore the interactions with EthR. These modifications led to compounds with nanomolar IC50s. A range of compounds were then screened by REMAssay to determine the boosting effect on ethionamide, and this identified compounds with up to 30 times boosting in the ethionamide MIC. The final chapter examines a concept where compounds were designed to exploit the dimeric nature of EthR by linking two chemical warheads with a flexible linker. These compounds are examined using mass spectrometry to investigate the stoichiometry of the interaction to provide insight into the binding of these extended compounds and exploring an alternative strategy to inhibit EthR. The work in this thesis demonstrated the successful use of fragment-based approaches for development of novel EthR inhibitors which showed significant ethionamide boosting effects.

APA, Harvard, Vancouver, ISO, and other styles

49

Goodman, M. "Differential scanning calorimetry and permeation studies of penetration enhancer and human skin interactions." Thesis, University of Bradford, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.374906.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Hill, Vivienne Lucy. "An investigation into the use of MTDSC as a technique for the characterisation of pharmaceutical materials." Thesis, University College London (University of London), 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.322735.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic 'DSC - Differential Scanning Calorimetry'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles