Relevant bibliographies by topics / DSC Measurement

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'DSC Measurement'

Author: Grafiati
Published: 3 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'DSC Measurement.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "DSC Measurement"

1

Distler, Johanna, Thomas Wöhrl, Robin Werner, et al. "Miniaturized differential scanning calorimeter with an integrated mass sensing system: first steps." Journal of Sensors and Sensor Systems 12, no. 1 (2023): 9–19. http://dx.doi.org/10.5194/jsss-12-9-2023.

Full text
Abstract:
Abstract. In this paper, the first steps towards integrating a mass sensing system into an existing miniaturized ceramic DSC (differential scanning calorimetry) chip are presented. A vibration setup is developed based on the mass-dependent change in frequency of the DSC chip as an oscillating cantilever. A simulation model reveals that the resolution of the measurement can be improved by reducing the chip thickness. In this study, different measurement methods (acoustic, optical, and piezoresistive) are investigated. Three complete measurement systems are set up and evaluated with regard to th
APA, Harvard, Vancouver, ISO, and other styles
2

Behrends, Gert, Dirk Stöbener, and Andreas Fischer. "Integrated, Speckle-Based Displacement Measurement for Lateral Scanning White Light Interferometry." Sensors 21, no. 7 (2021): 2486. http://dx.doi.org/10.3390/s21072486.

Full text
Abstract:
Lateral scanning white light interferometry (LSWLI) is a promising technique for high-resolution topography measurements on moving surfaces. To achieve resolutions typically associated with white light interferometry, accurate information on the lateral displacement of the measured surface is essential. Since the uncertainty requirement for a respective displacement measurement is currently not known, Monte Carlo simulations of LSWLI measurements are carried out at first to assess the impact of the displacement uncertainty on the topography measurement. The simulation shows that the uncertaint
APA, Harvard, Vancouver, ISO, and other styles
3

Danley, Robert L. "New modulated DSC measurement technique." Thermochimica Acta 402, no. 1-2 (2003): 91–98. http://dx.doi.org/10.1016/s0040-6031(02)00541-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Danley, Robert L. "New heat flux DSC measurement technique." Thermochimica Acta 395, no. 1-2 (2002): 201–8. http://dx.doi.org/10.1016/s0040-6031(02)00212-5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Peret, Anthony, Kelly W. Capel, Mu-Lan Jen, et al. "Perfusion MRI Techniques: Beyond DSC." Neurographics 13, no. 3 (2023): 210–29. http://dx.doi.org/10.3174/ng.2100041.

Full text
Abstract:
The use of brain hemodynamics is important in the assessment of numerous pathophysiologic conditions. The measurement of perfusion or delivery of blood to tissues by MR imaging is essential for neuroradiologists to understand and appropriately apply to clinical practice. Several different approaches are used. DSC and dynamic contrast-enhanced MR imaging study the signal change (according to T2* and T1, respectively) induced by an exogenous contrast agent, allowing the measurement of CBF, CBV, and time-related parameters. Blood oxygen level‐dependent (BOLD) MR imaging measures the T2* signal ch
APA, Harvard, Vancouver, ISO, and other styles
6

Gao, Maotiao, Shiqi Zhao, Hongjun Yang, Xuehong Wu, and Yingjie Xiao. "An Analysis of the Influence of DSC Parameters on the Measurement of the Thermal Properties of Phase-Change Material." Materials 17, no. 23 (2024): 5689. http://dx.doi.org/10.3390/ma17235689.

Full text
Abstract:
A differential scanning calorimeter (DSC) is widely used for measuring the thermal properties of phase-change materials (PCMs). Optimizing test conditions based on material characteristics is essential for accurate results. This study investigates the effects of experimental parameters, including sample mass, heating rate, measurement modes, and atmosphere flow rate, on the phase-change enthalpy and phase-change temperature results. The findings indicate that variations in sample mass and heating rate lead to significant changes in phase-change temperatures, while an increase in purge gas flow
APA, Harvard, Vancouver, ISO, and other styles
7

MIYATI, TOSHIAKI. "Measurement of cerebral hemodynamics using DSC-MRI." Japanese Journal of Radiological Technology 58, no. 1 (2002): 58–66. http://dx.doi.org/10.6009/jjrt.kj00003111345.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Isayev, A. I., and J. S. Deng. "Nonisothermal Vulcanization of Rubber Compounds." Rubber Chemistry and Technology 61, no. 2 (1988): 340–61. http://dx.doi.org/10.5254/1.3536192.

Full text
Abstract:
Abstract In the present paper, progress has been made in developing a model for nonisothermal vulcanization of rubber compounds. The model is presently based on differential scanning calorimetry (DSC) measurements of heat evolved during vulcanization. The model parameters are determined from several isothermal DSC scans including measurements of induction time and rate of vulcanization. This model has conveniently been employed for a calculation of the temperature distribution during vulcanization of a rubber slab based on a one-dimensional heat-conduction equation with a heat-generation term.
APA, Harvard, Vancouver, ISO, and other styles
9

Hinz, Hans-Jürgen, and Frederick P. Schwarz. "Measurement and analysis of results obtained on biological substances with differential scanning calorimetry (IUPAC Technical Report)." Pure and Applied Chemistry 73, no. 4 (2001): 745–59. http://dx.doi.org/10.1351/pac200173040745.

Full text
Abstract:
Differential scanning calorimeters (DSCs) have been widely used to determine the thermodynamics of phase transitions and conformational changes in biological systems including proteins, nucleic acid sequences, and lipid assemblies. DSCs monitor the temperature difference between two vessels, one containing the biological solution and the other containing a reference solution, as a function of temperature at a given scan rate. Recommendations for DSC measurement procedures, calibration procedures, and procedures for testing the performance of the DSC are described. Analysis of the measurements
APA, Harvard, Vancouver, ISO, and other styles
10

Warnert, E. A. H., F. Incekara, A. J. P. E. Vincent, et al. "P04.11 Voxelwise correlation between vascular MRI parameters obtained with ASL and DSC is decreased in IDH-wt non-enhancing glioma." Neuro-Oncology 21, Supplement_3 (2019): iii31. http://dx.doi.org/10.1093/neuonc/noz126.106.

Full text
Abstract:
Abstract BACKGROUND Comparative studies of dynamic susceptibility contrast (DSC) based measurement of cerebral blood volume (CBV) or cerebral blood flow (CBF) and arterial spin labelling (ASL) based measurement of CBF have previously shown good correlation of these parameters in human glioma. However, these studies were mostly done before inclusion of the mutation status of the isocitrate dehydrogenase (IDH) encoding gene in brain tumour classification. In light of the call for gadolinium-free imaging, here we investigate the effect of IDH-mutation status on the correlation between ASL and DSC
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "DSC Measurement"

1

Zhang, Daijiazi. "Physical, morphological and chemical structure & property relationships for alpha-keratins in bleached human hair." Thesis, University of Manchester, 2013. https://www.research.manchester.ac.uk/portal/en/theses/physical-morphological-and-chemical-structure--property-relationships-for-alphakeratins-in-bleached-human-hair(85eead7b-fcc3-4518-ba4c-7ca7041712c4).html.

Full text
Abstract:
The surface and structural change of human hair fibre have been analysed to determine the oxidation effects for bleached hairs. Three types of bleached hairs (6% H2O2 bleach, 9% H2O2 commercial bleach and commercial persulphate bleach (contains 9% H2O2)) as well as virgin hair were evaluated with the increasing treatment time using Scanning Electron Microscopy (SEM), Reflective Spectrophotometry, Differential Scanning Calorimetry (DSC) and Fourier Transform Infrared (FTIR) Spectroscopy. It is obvious that longer treatment times result in the greater surface and structural damage. However, comm
APA, Harvard, Vancouver, ISO, and other styles
2

Cote, Jasmin 1962. "New optic-disc topographic measurement technique." Diss., The University of Arizona, 1996. http://hdl.handle.net/10150/290655.

Full text
Abstract:
A new optical method, for the assessment of the optic nerve-head topography, was studied theoretically and experimentally. The motivation of this work is in relation with glaucoma, an eye disease that can lead to blindness. Glaucoma manifests itself by a destruction (atrophy) of the retinal axons, which in turn affects the shape (topography) of the optic nerve head (disc). Topographic measurement of the optic nerve head is used for diagnosis and tracking (progression) of glaucoma. The new technique consists of a dual-fringe projection system and a single-view imaging system. The dual-fringe pr
APA, Harvard, Vancouver, ISO, and other styles
3

Liu, Jie. "Characterization of New Rotary Endodontic Instruments Fabricated from Special Thermomechanically Processed NiTi Wire." The Ohio State University, 2009. http://rave.ohiolink.edu/etdc/view?acc_num=osu1244643081.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Di, Maio Dario. "SLDV technology for measurement of mistuned bladed disc vibration." Thesis, Imperial College London, 2008. http://hdl.handle.net/10044/1/1299.

Full text
Abstract:
Bladed discs are very sensitive structures and the amplitude vibration of each blade can vary significantly from blade to blade due to a series of factors such as geometrical inhomogeneity between blades or material properties. These factors lead to bladed disks mistuned thus the forced response amplitudes can be much higher than the level predicted for a tuned assembly. Designed models need to be “validate” to predict the response of a real bladed disc within the tolerances set by the manufactures and this process is very expensive as well as difficult. The validation process needs “reference
APA, Harvard, Vancouver, ISO, and other styles
5

Steel, William Perry. "Absolute displacement measurement of noisy disc brakes using holographic interferometry." Thesis, University of Huddersfield, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.418627.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Rye, Ryan Patrick. "Investigation of disc brake squeal via sound intensity and laser vibrometry." Thesis, Georgia Institute of Technology, 2000. http://hdl.handle.net/1853/19045.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Woods, William Paul. "The hydrodynamics of thin liquid films flowing over a rotating disc." Thesis, University of Newcastle Upon Tyne, 1995. http://hdl.handle.net/10443/295.

Full text
Abstract:
This study is concerned with flow and stability of thin liquid films flowing over the surface of a disc rotating about a vertical axis. The work consists of a theoretical and experimental investigation into the flow of the steady-state film, and the waves which occur on it. The theoretical model is investigated in its steady-state form (no waves present) using both asymptotic and numerical techniques. The unsteady problem is also examined, using asymptotic methods, for the inception and propagation of waves of small amplitude with respect to the mean film thickness. The experimental investigat
APA, Harvard, Vancouver, ISO, and other styles
8

Carretero, Benignos Jorge Alejandro 1972. "Measurement and modeling of the flow characteristics of micro disc valves." Thesis, Massachusetts Institute of Technology, 2001. http://hdl.handle.net/1721.1/81555.

Full text
Abstract:
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Aeronautics and Astronautics, 2001.<br>Includes bibliographical references (leaves 78-81).<br>by Jorge Alejandro Carretero Benignos.<br>S.M.
APA, Harvard, Vancouver, ISO, and other styles
9

Sturm, Anke. "Performance Measurement und Environmental Performance Measurement." Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2000. http://nbn-resolving.de/urn:nbn:de:swb:14-994768126734-55001.

Full text
Abstract:
Die Zielsetzung der vorliegenden Dissertationsschrift besteht in der Entwicklung einer systematisierten Vorgehensweise, eines Controllingmodells, zur unternehmensinternen Umweltleistungsmessung. Das entwickelte Environmental Performance Measurement (EPM)-Modell umfaßt die fünf Stufen Festlegung der Ziele der Umweltleistungsmessung (1. Stufe), Erfassung der Umwelteinflüsse nach der ökologischen Erfolgsspaltung (2. Stufe), Bewertung der Umwelteinflüsse auf der Grundlage des qualitätszielbezogenen dreistufigen Bewertungsmodells (3. Stufe), Beurteilung der festgestellten Umweltleistung (4. Stufe)
APA, Harvard, Vancouver, ISO, and other styles
10

Komar, Bogdana. "Macular pigment optical density measurements by one-wavelength reflection photometry – Influence of cataract surgery on the measurement results." Doctoral thesis, Universitätsbibliothek Leipzig, 2015. http://nbn-resolving.de/urn:nbn:de:bsz:15-qucosa-172371.

Full text
Abstract:
Purpose: The main objective of the present study was the investigation of possible influence of lens opacification on macular pigment optical density (MPOD) measurements. Methods: 86 eyes of 64 patients (mean age 73.4(±8.3)years) were included in the study. MPOD was prospectively measured using one-wavelength reflection method (Visucam500, Carl Zeiss Meditec AG) before and after cataract extraction with implantation of a blue-light filtering intraocular lens (AlconSN60WF). The median of the maximum optical density (MaxOD) and the median of the mean optical density (MeanOD) measurements of ma
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "DSC Measurement"

1

Boettinger, Wiiliam J. DTA and heat-flux DSC measurements of alloy melting and freezing. U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Lee, Mark C. Noncontact temperature measurement: Proceedings of a workshop sponsored by NASA Office of Space Science and Applications Division, Washington, D.C., and held at NASA Headquarters, Washington, D.C., April 30 - May 1, 1987. Edited by U.S. Office of Space Science and Applications. NASA, 1988.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Taylor, K. R. Traveltime and dispersion in the Potomac River, Cumberland, Maryland, to Washington, D.C. U.S. G.P.O., 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Sánchez Salcedo, Alejandro. Theory on DC Electric Circuits. Universidad de La Salle. Ediciones Unisalle, 2016. http://dx.doi.org/10.19052/9789588939933.

Full text
Abstract:
This book is intended as a major support for the DC Electric Circuits course from the Electrical Engineering program and the Automation Engineering program at Universidad de La Salle. Its main contribution is to provide the students with a step-by-step explanation and detailed illustrations about the main concepts and analysis techniques of DC electric circuits and their related measurement systems.
APA, Harvard, Vancouver, ISO, and other styles
5

Andrés, Páez Ramírez, and Colombia. Procuraduría Delegada para Asuntos Ambientales y Agrarios, eds. Contaminación atmosférica, causas, consecuencias y manejo en las ciudades de Bogotá, D.C., Cali, Medellín y el área metropolitana del Valle de Aburrá: Informe preventivo. Instituto de Estudios del Ministerio Público, 2013.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Hoeven, W. van der. DSC measurements on experimental TGDDM/DDS resin systems: The influence of variations in resin composition and catalyst content. National Aerospace Laboratory, 1990.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

AIVC Conference (24th 2003 Washington, D.C.). Ventilation, humidity control and energy: 24th AIVC and BETEC Conference : held in Washington, D.C., 12th-14th October 2003. Air Infiltration and Ventilation Centre, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Catalano, Shannan M. The measurement of crime: Victim reporting and police recording. LFB Scholarly Pub. LLC, 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Catalano, Shannan M. The measurement of crime: Victim reporting and police recording. LFB Scholarly Pub. LLC, 2006.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

United States. National Aeronautics and Space Administration., ed. [Frequency response measurements in battery electrodes]: [final report, 1 Feb. - 31 Dec. 1991]. National Aeronautics and Space Administration, 1992.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "DSC Measurement"

1

Aubuchon, S. R., and R. L. Blaine. "Optimization of the Thermal Conductivity Measurement by Modulated DSC™." In Thermal Conductivity 23. CRC Press, 2021. http://dx.doi.org/10.1201/9781003210719-9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Fawcett, T. G., C. E. Crowder, L. F. Whiting, et al. "The Rapid Simultaneous Measurement of Thermal and Structural Data by a Novel DSC/XRD Instrument." In Advances in X-Ray Analysis. Springer US, 1985. http://dx.doi.org/10.1007/978-1-4613-2471-3_34.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Kaur, Preetinder, Manpreet Singh, and Preeti Birwal. "Differential Scanning Calorimetry (DSC) for the Measurement of Food Thermal Characteristics and Its Relation to Composition and Structure." In Techniques to Measure Food Safety and Quality. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-68636-9_13.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Kaur, Preetinder, Manpreet Singh, and Preeti Birwal. "Correction to: Differential Scanning Calorimetry (DSC) for the Measurement of Food Thermal Characteristics and Its Relation to Composition and Structure." In Techniques to Measure Food Safety and Quality. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-68636-9_18.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Hadži, San, Matjaž Bončina, and Jurij Lah. "G-Quadruplex Stability from DSC Measurements." In Methods in Molecular Biology. Springer New York, 2019. http://dx.doi.org/10.1007/978-1-4939-9666-7_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Minero, C., E. Pelizzetti, and M. R. Preston. "Oceanic DOC Measurements." In Chemical Processes in Marine Environments. Springer Berlin Heidelberg, 2000. http://dx.doi.org/10.1007/978-3-662-04207-6_17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Uchida, Hiroshi, Masahide Wakita, Akiko Makabe, Akihiko Murata, and Alexander Petrovic. "Changes in the Composition of International Association for the Physical Sciences of the Oceans Standard Seawater." In Springer Oceanography. Springer Nature Singapore, 2025. https://doi.org/10.1007/978-981-96-2520-8_10.

Full text
Abstract:
Abstract Changes in the composition of International Association for the Physical Sciences of the Oceans Standard Seawater (SSW) for salinity measurements were examined for borosilicate glass bottle-type SSW batches P138 (2000) to P165 (2021) to understand their impact on salinity and density stability of SSW. Results showed that (i) silicate increased with time (5.47 μmol kg−1 year−1); (ii) dissolved inorganic carbon (DIC) decreased with time (−13.5 μmol kg−1 year−1); (iii) total alkalinity, nitrate, nitrite, and phosphate were constant; and (iv) ammonium, dissolved organic carbon (DOC), and
APA, Harvard, Vancouver, ISO, and other styles
8

Patrick, Dale R., Stephen W. Fardo, Ray E. Richardson, and Vigyan (Vigs) Chandra. "Meters and Measurements." In DC/AC Electrical Fundamentals. River Publishers, 2024. http://dx.doi.org/10.1201/9781003377269-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Michael A., Michael A., Jean-José Orteu, and Hubert W. Schreier. "Digital Image Correlation (DIC)." In Image Correlation for Shape, Motion and Deformation Measurements. Springer US, 2009. http://dx.doi.org/10.1007/978-0-387-78747-3_5.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Murata, Akihiko, Nagisa Fujiki, and Hitoshi Mitsuda. "Production and Usage of Reference Materials for Total Dissolved Inorganic Carbon and Total Alkalinity." In Springer Oceanography. Springer Nature Singapore, 2025. https://doi.org/10.1007/978-981-96-2520-8_14.

Full text
Abstract:
Abstract Certified Reference Materials (CRMs) are essential for high-quality measurements. However, CRMs are sometimes unavailable. In such cases, the comparability of measurements can be maintained to some extent if homogeneous and stable reference materials (RMs) are available. In this chapter, we present examples of the preparation and use of RMs for total dissolved inorganic carbon (DIC) and total alkalinity (TA) in seawater. One example is a working RM produced in-house by JAMSTEC, whose use has been limited to R/V Mirai cruises. The other is the KANSO TECHNOS CO., LTD (KANSO) RM, which i
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "DSC Measurement"

1

Han, Chansu, Akira Tanaka, Takeshi Takahashi, Sajjad Dadkhah, Ali A. Ghorbani, and Tsung-Nan Lin. "Traceability Measurement Analysis of Sustained Internet-Wide Scanners via Darknet." In 2024 IEEE Conference on Dependable and Secure Computing (DSC). IEEE, 2024. http://dx.doi.org/10.1109/dsc63325.2024.00015.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Guo, Chenqing, Jinxin Zuo, Yueming Lu, and Weixuan Xie. "Reliability Measurement Of Vehicle Sensor Data Based On Historical Perception." In 2024 IEEE 9th International Conference on Data Science in Cyberspace (DSC). IEEE, 2024. https://doi.org/10.1109/dsc63484.2024.00054.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Dagdanpurev, Sumiyakhand, Darkhijav Davaasuren, Adiyabat Enkhjargal, and Amartuvshin Renchin-Ochir. "A new approach for non-contact, automated measurement of respiration rate using structured light." In 2024 IEEE 9th International Conference on Data Science in Cyberspace (DSC). IEEE, 2024. https://doi.org/10.1109/dsc63484.2024.00120.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Partridge, Paul E. "Maximizing the Accuracy and Precision of Cure Determination on Fusion Bonded Epoxy by Differential Scanning Calorimetry." In CORROSION 2000. NACE International, 2000. https://doi.org/10.5006/c2000-00770.

Full text
Abstract:
Abstract Optimum cure on FBE is one part of achieving maximum coating performance. Transition temperature measurements by DSC are influenced by sample acquisition, sample preparation, machine parameters and analysis techniques. The effect of each step is described, along with a logical approach to parameters that maximize accuracy and precision of DSC cure measurements.
APA, Harvard, Vancouver, ISO, and other styles
5

Carrubba, Carlotta, Andrea Bonfanti, Nicola Nocera, Federico Bertasi, and Alessandro Mancini. "Optimized Hardness Measurements for Micrometric Coatings in Disc Brake Components." In CONFERENCE 2024. AMPP, 2024. https://doi.org/10.5006/c2024-20993.

Full text
Abstract:
Abstract The manuscript describes an optimized analytical protocol for the measurement of hardness and Young's modulus in micrometric Sol-Gel coatings for brake components. In particular, two different hybrid organic-inorganic coatings with different functional properties are presented as example. The work pays particular attention in developing and optimizing reliable hardness measurements procedures by coupling Focus Ion Beam Scanning Electron Microscopy (FIB-SEM) and Nano-Indentation (NI) probes. In particular, FIB- SEM is used to directly assess the actual coating thickness, avoiding any e
APA, Harvard, Vancouver, ISO, and other styles
6

Sebastian, Szczech. "Differential Scanning Calorimetry(DSC) Calibration and Measurement." In Differential Scanning Calorimetry(DSC) Calibration and Measurement. US DOE, 2023. http://dx.doi.org/10.2172/1989874.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Devireddy, Ramachandra V., Debopam Raha, and John C. Bischof. "Measurement of Water Transport During Freezing Using Differential Scanning Calorimetry." In ASME 1996 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1996. http://dx.doi.org/10.1115/imece1996-0748.

Full text
Abstract:
Abstract A new technique using Differential Scanning Calorimeter (DSC) was developed to investigate water transport in whole tissue slices (1–5 mm3) and suspended cells during freezing. The tissue and cellular DSC data were correlated to water transport data by freeze substitution tissue microscopy and standard cellular cryomicroscopy techniques respectively. Sprague Dawley liver tissue and a (non-attached) lymphocyte (Epstein Bar Virus Transformed, EBVT) human cell system, were chosen as our tissue and cell model systems. The DSC was used to quantitatively monitor the heat released by water t
APA, Harvard, Vancouver, ISO, and other styles
8

FERRASSE, J. H., P. ARLABOSSE, and D. LECOMTE. "DIRECT TOTAL HEAT OF DESORPTION MEASUREMENT FROM COUPLED TGA-DSC ANALYSIS." In Proceedings of the Second Pacific Basin Conference. WORLD SCIENTIFIC, 2000. http://dx.doi.org/10.1142/9789812793331_0073.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Chen, Liang, Hua Pang, Xiaoming Song, Lili Liu, Wenjie Li, and Changbing Tang. "The Method of Specific Heat Capacity Measurement for Irradiated Zr-4 Alloy Capsule Material." In 2016 24th International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/icone24-60141.

Full text
Abstract:
Specific heat capacity of irradiated and un-irradiated Zr-4 alloy in the temperature range from 40°C to 500°C was measured by DSC (Differential Scanning Calorimetry) in Hot Cell of NPIC for the first time in China. The irradiated discal specimen was sampled from Zr-4 alloy plate, and the dose was about 18μSv/h. The measurement was proceeded on DSC device (404 F1 type), and the data of specific heat capacity was obtained by relative method made use of Proteus analytical software. Discharge air exhausted to hot cell by vent in DSC. The test result indicated that the test method was confirmed fea
APA, Harvard, Vancouver, ISO, and other styles
10

Xinxing, Zhang, Tian Zhihong, and Zhang Luchen. "A Measurement Study on Mainline DHT and Magnet Link." In 2016 IEEE First International Conference on Data Science in Cyberspace (DSC). IEEE, 2016. http://dx.doi.org/10.1109/dsc.2016.106.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "DSC Measurement"

1

DSC-MRI Consensus QIBA Profile. Chair Ona Wu, Mark Shiroishi, and Leland Hu. Radiological Society of North America (RSNA)/Quantitative Imaging Biomarkers Alliance (QIBA), 2020. https://doi.org/10.1148/qiba/20201022.

Full text
Abstract:
The goal of a QIBA Profile is to help achieve a useful level of performance for a given biomarker. Profile development is an evolutionary, phased process; this Profile is in the Public Comment Resolution Draft stage. The performance claims represent expert consensus and will be empirically demonstrated at a subsequent stage. Users of this Profile are encouraged to refer to the following site to understand the document’s context: http://qibawiki.rsna.org/index.php/QIBA_Profile_Stages. The Claim (Section 2) describes the biomarker performance. The Activities (Section 3) contribute to generating
APA, Harvard, Vancouver, ISO, and other styles
2

Kamai, Tamir, Gerard Kluitenberg, and Alon Ben-Gal. Development of heat-pulse sensors for measuring fluxes of water and solutes under the root zone. United States Department of Agriculture, 2016. http://dx.doi.org/10.32747/2016.7604288.bard.

Full text
Abstract:
The objectives defined for this study were to: (1) develop a heat-pulse sensor and a heat-transfer model for leaching measurement, and (2) conduct laboratory study of the sensor and the methodology to estimate leaching flux. In this study we investigated the feasibility for estimating leachate fluxes with a newly designed heat-pulse (HP) sensor, combining water flux density (WFD) with electrical conductivity (EC) measurements in the same sensor. Whereas previous studies used the conventional heat pulse sensor for these measurements, the focus here was to estimate WFD with a robust sensor, appr
APA, Harvard, Vancouver, ISO, and other styles
3

Newmark, Gregory L. Measurement and Prediction of Transit System Performance Using Probe Data Generated through DSRC and non-DSRC Technologies. Mineta Transportation Institute, 2024. http://dx.doi.org/10.31979/mti.2024.2008.

Full text
Abstract:
This research explores the application of two different probe data standards to transit performance measurement. The first section chronicles the proposed and implemented transit uses of dedicated short-range communication (DSRC) technologies during the two decades between the standard’s emergence and its announced sunset. The research finds that, despite proposed applications across safety, operation, and information domains, DSRC never became embedded in transit operations. By contrast, the general transit feed specification (GTFS) standard with its real-time (RT) extension has been widely e
APA, Harvard, Vancouver, ISO, and other styles
4

Minty, Michiko G. Coupled-Bunch Instability Measurements at PEP-II (Oct-Dec, 1998). Office of Scientific and Technical Information (OSTI), 1999. http://dx.doi.org/10.2172/9893.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kiefner, Maxey, and Eiber. L51607 Pipeline Coating Impedance Effect on Powerline Fault Current Coupling. Pipeline Research Council International, Inc. (PRCI), 1989. http://dx.doi.org/10.55274/r0010294.

Full text
Abstract:
Prior research leading to the development of predictive electromagnetic coupling computer codes has shown that the coating conductance is the principal factor in determining the response of a pipeline to magnetic induction transmission line. Under power line fault conditions, a high voltage may stress the coating causing a significant change in its conductance, and hence, the coupling response. Based upon laboratory experimentation and analysis, a model has been developed which allows prediction of the modified coating characteristics when subjected to high voltages during fault situations. Th
APA, Harvard, Vancouver, ISO, and other styles
6

Buchler, M., H. G. Schoneich, and F. Stalder. DRS04BSS Criteria to Assess the Alternating Current Corrosion Risk of Cathodically Protected Pipelines. Pipeline Research Council International, Inc. (PRCI), 2004. http://dx.doi.org/10.55274/r0011818.

Full text
Abstract:
This paper addresses the assessment of the corrosion risk of a pipeline due to alternating currents. The state of the art technique is the use of coupons, which simulate a coating fault and which allow to measure the ac-current density and also to evaluate corrosion products and pits. Recently, different criteria to assess the corrosion risk have been proposed that are based on the ratio between ac- and dc-current density or the instantaneous off-potential (high-speed off-potential measurement) measured on a coupon. Furthermore, the charge needed to oxidize corrosion products (under alkaline c
APA, Harvard, Vancouver, ISO, and other styles
7

Winn, C. D. Measurement of DIC, Alkalinity and pH of the WOCE/HP cruises. Progress report. Office of Scientific and Technical Information (OSTI), 1993. http://dx.doi.org/10.2172/10134301.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Ferroni, Marco. Social Capital and Social Cohesion: Definition and Measurement. Inter-American Development Bank, 2008. http://dx.doi.org/10.18235/0006817.

Full text
Abstract:
The purpose of this presentation is to propose a definition of the concept of social cohesion and an approach to measuring it. We proceed in two parts: Part I: Cumulative definition and measurement; Part II: Exploration and measurement of key contributing dimensions: Solidarity, social protection, citizenship. This work was discussed at the Taller de Consulta sobre medición de la calidad de vida, IDB, Washington DC, December 8, 2006.
APA, Harvard, Vancouver, ISO, and other styles
9

Groeneveld. L41039 Locating Coating Defects and Interpreting Cathodic Protection Effectiveness. Pipeline Research Council International, Inc. (PRCI), 1996. http://dx.doi.org/10.55274/r0011227.

Full text
Abstract:
A number of commercially available survey methods were examined to determine the best techniques for locating coating defects and interpreting cathodic protection effectiveness. The survey evaluated numerous methods using AC, DC, and electromagnetic measurement principles. The evaluations were based upon vendor literature, previous technical publications, and practical experience.
APA, Harvard, Vancouver, ISO, and other styles
10

Botros, Kamal. PR-383-104506-R02 Shock Tube Measurement of Decompression Wave Speed in CO2 with Impurities. Pipeline Research Council International, Inc. (PRCI), 2013. http://dx.doi.org/10.55274/r0010811.

Full text
Abstract:
This report contains the results of 43 shock tube tests simulating pipeline rupture using an NPS 2 (DN50) shock tube with a rupture disc. These tests were conducted on pure CO2, binaries with N2, O2, CO, CH4 and H2, as well as for compositions representative of typical carbon capture technologies. The resulting decompression wave speeds are compared with predictions utilizing different equations of state.
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'DSC Measurement' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography