Log in

Relevant bibliographies by topics / Dynamometer. eng

Contents

Journal articles
Dissertations / Theses
Books
Conference papers

Academic literature on the topic 'Dynamometer. eng'

Author: Grafiati

Published: 4 June 2021

Last updated: 6 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Dynamometer. eng.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Dynamometer. eng"

1

Gregório, Jorge P., and Francisco M. Brójo. "Development of a 4 stroke spark ignition opposed piston engine." Open Engineering 8, no. 1 (2018): 337–43. http://dx.doi.org/10.1515/eng-2018-0039.

Full text

Abstract:

Abstract The purpose of this project was to develop a low-cost OP engine, 4-stroke, gasoline by joining two single-cylinder reciprocating internal combustion engines with side valves on the block, removing the heads. The chosed engine was Model EY15 of Robin America. Joining these two engine blocks together made possible to build an opposed-piston engine (OPE) with two crankshafts. In this new engine, the combustion chamber is confined to the space inside the cylinder between the piston heads and the chamber between the valves. The pistons move in the cylinder axis in opposite directions, a fe

APA, Harvard, Vancouver, ISO, and other styles

2

Lewicki, Wojciech. "Technical and economic aspects of starting a selected power unit at low ambient temperatures." Open Engineering 11, no. 1 (2021): 606–16. http://dx.doi.org/10.1515/eng-2021-0059.

Full text

Abstract:

Abstract The article presents research on the impact of a 359 compression-ignition engine starting at low ambient temperatures. This engine is used in vehicles such as STAR 200, 244, and 226. The purpose of these tests was to determine the amount of wear depending on the ambient temperature and the number of starts, as well as to compare the wear at start-up with the wear occurring during tests on the dynamometer (long-term test for reliability) and wear occurring during the operation of the engine in the vehicle, and the impact of the number of starts and ambient temperature on diesel engine

APA, Harvard, Vancouver, ISO, and other styles

3

Пономарев, Борис, Boris Ponomarev, Ши Нгуен, and Shi Nguen. "DYNAMOMETER CHOICE FOR CUTTING FORCE MEASUREMENT AT END MILLING." Bulletin of Bryansk state technical university 2019, no. 5 (2019): 15–24. http://dx.doi.org/10.30987/article_5cda64cc611ed4.66880449.

Full text

Abstract:

In the paper there are presented results of the comparison of dynamometers of three types with reference to measurements connected with the definition of values making cutting forces in the course of blank finish five-coordinate milling with spherical-cylindrical mill cutters with the diameter from 5 to 10 mm. At that a particular attention is paid to the protection of these devices against external influences, to the processing possibility of data obtained in measuring equipment with the use of program applications. The measurement series of cutting forces with the aid of a stationary dynamom

APA, Harvard, Vancouver, ISO, and other styles

4

Bombasaro, E., and R. Oddera. "Field measurement of contact forces on rollers for a large diameter pipe conveyor." Open Engineering 11, no. 1 (2020): 130–41. http://dx.doi.org/10.1515/eng-2021-0014.

Full text

Abstract:

AbstractAn intensive field measurement was carried out to assess the force acting on the rollers for a large diameter pipe conveyor. A special idler enclosing two dynamometers was designed and installed in the various roller positions. The forces on the rollers were metered while the conveyor was running with and without conveying material. The position of the two dynamometers was such allowing to derive the theoretical contact point of the belt onto the roller. The measurements were carried out in a straight section of the pipe conveyor and in the centre part of a horizontal curve. Obtained d

APA, Harvard, Vancouver, ISO, and other styles

5

Robertson, Rick N., Louis R. Osternig, Joseph Hamill, and Paul Devita. "EMG‐torque relationships during isokinetic dynamometer exercise." Sports Medicine, Training and Rehabilitation 2, no. 1 (1990): 1–10. http://dx.doi.org/10.1080/15438629009511892.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Pathri, Bhargav Prajwal, Arpit Kumar Garg, Deepak Rajendra Unune, Harlal Singh Mali, Sukhdeep S. Dhami, and Ravindra Nagar. "Design and Fabrication of a Strain Gauge Type 3-axis Milling Tool Dynamometer." International Journal of Materials Forming and Machining Processes 3, no. 2 (2016): 1–15. http://dx.doi.org/10.4018/ijmfmp.2016070101.

Full text

Abstract:

This paper presents the design and development of low cost strain gauge type milling tool dynamometer, which is suitable for measuring milling forces. The designed dynamometer contains four octagonal ring members on which strain gauges were bonded. The strain induced on the strain gauges due to milling forces during cutting was measured in terms of voltages using a Wheatstone bridge. A data acquisition system was connected to the dynamometer to acquire the data. The end milling operation was carried out on AISI 1020 steel work pieces of 60 mm x 30mm x 20 mm size using different combination of

APA, Harvard, Vancouver, ISO, and other styles

7

Grabiner, Mark D., and Tammy M. Owings. "Intent-Related Differences in Surface EMG of Maximum Eccentric and Concentric Contractions." Journal of Applied Biomechanics 19, no. 2 (2003): 99–105. http://dx.doi.org/10.1123/jab.19.2.99.

Full text

Abstract:

For this study it was hypothesized that when participants intended to perform a maximum voluntary concentric (or eccentric) contraction but had an eccentric (or concentric) contraction imposed upon them, the initial EMG measured during the isometric phase preceding the onset of the dynamometer motion would reflect the intended contraction condition. The surface EMG of the vastus lateralis muscle was measured in 24 participants performing isokinetic concentric and eccentric maximum voluntary knee extensor contractions. The contractions were initiated from rest and from the same knee flexion ang

APA, Harvard, Vancouver, ISO, and other styles

8

Liu, Hongzhao, Baixi Liu, Daning Yuan, and Jianhua Rao. "Identification for Sucker-Rod Pumping System’s Damping Coefficients Based on Chain Code Method of Pattern Recognition." Journal of Vibration and Acoustics 129, no. 4 (2007): 434–40. http://dx.doi.org/10.1115/1.2748464.

Full text

Abstract:

In this paper, a method for identifying the damping coefficients of a directional well sucker-rod pumping system is put forward by means of the chain code method of pattern recognition. The 24-directional chain code is provided to encode the dynamometer card curve. The parametric equation of the dynamometer card curve is transformed into Fourier series whose coefficients can be computed according to the curve’s chain codes. By means of these coefficients, shape characteristics of the curve are extracted. The Euclidean distance is introduced as the measurement of similar degree between the shap

APA, Harvard, Vancouver, ISO, and other styles

9

Lee, Tae-Heon, Kyeong-Soon Park, Dong-Geol Lee, and Nam-Gi Lee. "Concurrent Validity by Comparing EMG Activity between Manual Muscle Testing, Handheld Dynamometer, and Stationary Dynamometer in Testing of Maximal Isometric Quadriceps Contraction." Journal of Physical Therapy Science 24, no. 12 (2012): 1219–23. http://dx.doi.org/10.1589/jpts.24.1219.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Wu, B. D., Ji Jie Ma, X. Y. Liu, and Jing Yang Sun. "Comparison Research on Inertia Simulation in Brake Dynamometer Test." Materials Science Forum 628-629 (August 2009): 369–74. http://dx.doi.org/10.4028/www.scientific.net/msf.628-629.369.

Full text

Abstract:

Two methods of inertia simulation, energy compensation method and torque control method, using work of electromotor during brake application are discussed in comparison in this paper. Mathematical models are described. Experiment under various brake conditions unfolds the rule of some key factors of energy compensation including working period of electromotor, start point and ending condition of compensation. Comparison experiment shows advantages of the energy compensation method over its counterpart. Limitations as well as corresponding solutions are discussed in the end.

APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Dynamometer. eng"

1

Cortez, Paulo José Oliveira. "Dispositivo para avaliar a força muscular dos membros superiores /." Guaratinguetá : [s.n.], 2008. http://hdl.handle.net/11449/97071.

Full text

Abstract:

Orientador: José Elias Tomazini<br>Banca: José Elias Tomazini<br>Banca: Celso Pinto Moraes Pereira<br>Banca: Mauro Gonçalves<br>Resumo: Os objetivos do presente trabalho foram o desenvolvimento de um dispositivo capaz de mensurar a força muscular gerada pelos músculos do membro superior e, a verificação do funcionamento e adaptabilidade desse dispositivo, através de um estudo comparativo da força muscular em sujeitos saudáveis. Foi idealizada uma Estação de Medição de Força para avaliar a força muscular dos membros superiores a partir de contrações isométricas na direção vertical (flexão) e ho

APA, Harvard, Vancouver, ISO, and other styles

2

Santos, Elcio Alteris dos. "Dinamômetro biomédico para avaliação funcional das mãos /." Ilha Solteira : [s.n.], 2009. http://hdl.handle.net/11449/87061.

Full text

Abstract:

Orientador: Aparecido Augusto de Carvalho<br>Banca: Alexandre César Rodrigues da Silva<br>Banca: Josivaldo Godoy da Silva<br>Resumo: O teste de força de aperto das mãos tem como finalidade detectar eventuais patologias nos membros superiores e avaliar a força exercida pelas mãos de pacientes. Neste trabalho é descrito o desenvolvimento de um dinamômetro biomédico projetado para efetuar a avaliação funcional das mãos, através da utilização de moldes específicos. O equipamento é constituído basicamente por sensores com extensômetros metálicos, um circuito de condicionamento de sinais, um circuit

APA, Harvard, Vancouver, ISO, and other styles

3

Frazer, Mardon Bentley. "The assessment of spine movement dysfunction by a commercial dynamometer, EMG and an EMG assisted model." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1997. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp04/nq22202.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Moreira, Mónica Fernandes. "Muscle fatigue resistance: comparison of Martin vigorimeter and Jamar dynamometer in community-dwelling people." Master's thesis, Universidade de Aveiro, 2015. http://hdl.handle.net/10773/16136.

Full text

Abstract:

Mestrado em Gerontologia<br>Background: For the diagnosis of frailty exhaustion is a criteria currently measured by self-reported questionnaires, which are subjective and dependent on individual perception. The FR test has been developed as a bed side objective evaluation of muscle fatigue. The test was validated for the VM. However, the JD is frequently used to measure the grip strength. So the comparison of these devices is required to understand if FR is similar when measured with both devices. Methods: Fifty-four (29 female and 25 male; mean age: 39.98 ± 18.09) community-dwelling people we

APA, Harvard, Vancouver, ISO, and other styles

5

Boyd, Michael. "Design and analysis of a viscous film dynamometer for wide range turbocharger turbine performance mapping." Thesis, Queen's University Belfast, 2018. https://pure.qub.ac.uk/portal/en/theses/design-and-analysis-of-a-viscous-film-dynamometer-for-wide-range-turbocharger-turbine-performance-mapping(a5c21425-5cca-4fb3-b4e0-d3976e28ab7c).html.

Full text

Abstract:

The transient nature of automotive exhaust gas flow is a significant obstacle to turbocharger turbine optimisation, with the need to optimise performance for pulsating flow and maintain acceptable performance across a wide range of engine operating conditions. Standard industrial testing methods are incapable of applying the desired power absorption, due to the inherent limitations of radial compressors, and therefore are limited in their ability to map turbine characteristics. Firstly, this project investigated existing technologies and identified a design approach which allowed development o

APA, Harvard, Vancouver, ISO, and other styles

6

Miller, Stuart Charles. "Mechanical factors affecting the estimation of tibialis anterior force using an EMG-driven modelling approach." Thesis, Brunel University, 2014. http://bura.brunel.ac.uk/handle/2438/8763.

Full text

Abstract:

The tibialis anterior (TA) muscle plays a vital role in human movement such as walking and running. Overuse of TA during these movements leads to an increased susceptibility of injuries e.g. chronic exertional compartment syndrome. TA activation has been shown to be affected by increases in exercise, age, and the external environment (i.e. incline and footwear). Because activation parameters of TA change with condition, it leads to the interpretation that force changes occur too. However,activation is only an approximate indicator of force output of a muscle. Therefore, the overall aim of this

APA, Harvard, Vancouver, ISO, and other styles

7

Dragana, Golik-Perić. "Razlike u izokinetičkim parametrima natkolene muskulature u odnosu na bol u leđima." Phd thesis, Univerzitet u Novom Sadu, Asocijacija centara za interdisciplinarne i multidisciplinarne studije i istraživanja, 2016. http://www.cris.uns.ac.rs/record.jsf?recordId=101143&source=NDLTD&language=en.

Full text

Abstract:

Bol je subjektivno, neprijatno opažanje i osećaj. Čovek često oseća bol u delu tela kojije znatno udaljen od mesta nastanka bola. U istraživanju je primenjena transverzalnametoda, jednokratnog merenja. Ispitivanjem je obuhvaćeno 136 ispitanika, aktivnihfudbalera, starosti 18-35 (20.49±3.73) godina. Sva merenja su vr&scaron;ena od 2006. do2016.godine. Ispitanici su ispunili anketu o postojanju bola u leđima, pre samogpočetka testiranja, gde su intenzitet bolnosti subjektivno procenili Rolandovom skalombola). Celokupan uzorak je stratifikovan proporcionalnom tehnikom u pet grupa naosnovu

APA, Harvard, Vancouver, ISO, and other styles

8

WIMMER, Roman. "Komparace měřících senzorů Vernier se zaměřením na lékařství." Master's thesis, 2017. http://www.nusl.cz/ntk/nusl-363629.

Full text

Abstract:

The diploma thesis describes selected Vernier sensors and demonstrates their utilization in schools. The selection of digital tools is focused on medial area. In particular, the thesis deals with the ECG, spirometer, and dynamometer sensors. In the theoretical part, the history of the Vernier company is presented and the Vernier system and its benefits are discussed with special regard to the workflow from preparation phase to the process of measuring which can be used in classrooms. The research part consists of individual measuring experiments utilizing the sensors and their comparison with

APA, Harvard, Vancouver, ISO, and other styles

Books on the topic "Dynamometer. eng"

1

Blood lactate and integrated EMG of cyclists, runners and untrained subjects during incremental and constant load work. 1986.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Blood lactate and integrated EMG of cyclists, runners and untrained subjects during incremental and constant load work. 1989.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Dynamometer. eng"

1

Ammouri, A. H., and R. F. Hamade. "Toward an Affordable Automation Scheme of Friction Stir Processing." In ASME 2015 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/imece2015-53314.

Full text

Abstract:

Friction stir processing (FSP), an offshoot from friction stir welding (FSW), is an intricate operation that involves refining the material by a rotating tool. Active control of the resulting size and distribution uniformity of grain structure is desirable. Achieving such a control across the processed area requires real-time control of the process input variables in order to control the pertinent state variables (e.g., temperature, strain, and strain rate) throughout the process. Many active control schemes typically used in friction stir processes (such as position-, speed-, force-, and torq

APA, Harvard, Vancouver, ISO, and other styles

2

Javorek, Bryan, Barry K. Fussell, and Robert B. Jerard. "Calibration of a Milling Force Model Using Feed and Spindle Power Sensors." In ASME 2008 International Manufacturing Science and Engineering Conference collocated with the 3rd JSME/ASME International Conference on Materials and Processing. ASMEDC, 2008. http://dx.doi.org/10.1115/msec_icmp2008-72315.

Full text

Abstract:

Changes in cutting forces during a milling operation can be associated with tool wear and breakage. Accurate monitoring of these cutting forces is an important step towards the automation of the machining process. However, direct force sensors, such as dynamometers, are not practical for industry application due to high costs, unwanted compliance, and workspace limitations. This paper describes a method in which power sensors on the feed and spindle motors are used to generate coefficients for a cutting force model. The resulting model accurately predicts the X and Y cutting forces observed in

APA, Harvard, Vancouver, ISO, and other styles

3

Park, Jeong-Bin, Yeong-Seon Hong, Jin-Woong Kim, et al. "Wear Signal Measurement of Micro-End Mill Using Wavelet Analysis." In ASME 2008 International Manufacturing Science and Engineering Conference collocated with the 3rd JSME/ASME International Conference on Materials and Processing. ASMEDC, 2008. http://dx.doi.org/10.1115/msec_icmp2008-72121.

Full text

Abstract:

Tool breakage poses a major problem for mechanical micro-tools. Although the prediction of tool wear is important in the scheduling of tool change and maintaining productivity, the life of micro-tools is generally predicted statistically based on data from experimental machining trials. In this study, force signals were observed during machining using a micro-end mill. The relationship between these signals and the wear of the micro-end mill was investigated using wavelet analysis. Printed Circuit Board (PCB) substrate materials were used as a workpiece, and cutting forces were measured with a

APA, Harvard, Vancouver, ISO, and other styles

4

Liu, Baixi, Hongzhao Liu, Daning Yuan, and Jianhua Rao. "A New Recognition Method for Damping Coefficients of Rod Pumping System of Directional Well." In ASME 8th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2006. http://dx.doi.org/10.1115/esda2006-95019.

Full text

Abstract:

In this paper, a pattern recognition method is put forward to identify damping coefficients of rod pumping system of directional well by using characteristics space mapping. The 24-direction chain code is presented to encode the curve of dynamometer card. The parametric equation of the dynamometer card curve is transformed into Fourier series whose coefficients can be computed according to the curve’s chain codes. By means of those Fourier coefficients, shape characteristics of the curve are extracted. Euclidean distance is introduced as the measurement of similar degree between the shape char

APA, Harvard, Vancouver, ISO, and other styles

5

Meinhardt, Glenn, Cary Ketelhut, Michael Voight, and Glen Steyer. "Correlation of Axle End-of-Line (EOL) NVH Performance and Laboratory Dynamometer Performance." In SAE 2005 Noise and Vibration Conference and Exhibition. SAE International, 2005. http://dx.doi.org/10.4271/2005-01-2306.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Delgado, Oscar F., Nigel N. Clark, and Gregory J. Thompson. "Method for Translation of In-Use Fuel Consumption and NOX Emissions Between Different Heavy-Duty Vehicle Routes." In ASME 2011 Internal Combustion Engine Division Fall Technical Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/icef2011-60108.

Full text

Abstract:

Portable emissions measurement systems (PEMS) are used to perform in-use measurements for emissions inventory and regulatory applications. PEMS data represent real world conditions more accurately than chassis dynamometer or engine dynamometer testing, arguably being the most realistic method of determining exhaust emissions over a certain driving route. However, measured emissions and fuel consumption depend strongly on both the route followed and the traffic situation that the vehicle encounters. A tool for translation of emissions and fuel consumption between diverse types of vehicle activi

APA, Harvard, Vancouver, ISO, and other styles

7

Evans, Charles K., and J. Chris Oakwood. "Brake Caliper Fluid Displacement on Dynamometers - Is it The End For Caliper Test Stands?" In 25th Annual Brake Colloquium. SAE International, 2007. http://dx.doi.org/10.4271/2007-01-3955.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Zhao, Yong, Robert B. Jerard, and Barry K. Fussell. "End Milling Force Model Calibration Using Measured Force Profiles." In ASME 2012 International Manufacturing Science and Engineering Conference collocated with the 40th North American Manufacturing Research Conference and in participation with the International Conference on Tribology Materials and Processing. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/msec2012-7385.

Full text

Abstract:

This paper introduces a method to use the cutting force profile, measured from a Kistler dynamometer, to calibrate a mechanistic based force model containing four cutting coefficients. The undesirable effects of tool vibration and force sensor dynamics are minimized by carefully choosing experimental conditions. Cutting force profiles provide an array of force versus chip thickness based values that can be used in a regression fit to find the model coefficients. Results show that different ranges of chip thickness used in the calibration process result in slightly different cutting coefficient

APA, Harvard, Vancouver, ISO, and other styles

9

Souflas, I., A. Pezouvanis, B. Mason, and K. M. Ebrahimi. "Dynamic Modeling of a Transient Engine Test Cell for Cold Engine Testing Applications." In ASME 2014 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/imece2014-36286.

Full text

Abstract:

The increasing complexity in the development and manufacturing process of internal combustion engines leads to a higher demand for more effective testing and monitoring methods. Cold engine testing becomes progressively the main End-of-Line test which is used nowadays from automotive engine manufacturers with the purpose of determining the integrity of engine assembly. The present work is focused on the development of a detailed physics-based, lumped-parameter, dynamic model of a single cylinder internal combustion engine coupled with an alternating current transient dynamometer for cold engin

APA, Harvard, Vancouver, ISO, and other styles

10

Ma, Lei, Shreyes N. Melkote, John B. Morehouse, James B. Castle, James W. Fonda, and Melissa A. Johnson. "Thin-Film PVDF Sensor Based Monitoring of Cutting Forces in Peripheral End Milling." In ASME 2012 International Manufacturing Science and Engineering Conference collocated with the 40th North American Manufacturing Research Conference and in participation with the International Conference on Tribology Materials and Processing. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/msec2012-7217.

Full text

Abstract:

A sensor module that integrates a thin film Polyvinylidene Fluoride (PVDF) piezoelectric strain sensor and an in situ data logging platform has been designed and implemented for monitoring of feed and transverse forces in the peripheral end milling process. The module, which is mounted on the tool shank, measures the dynamic strain(s) produced in the tool and logs the data into an on-board card for later retrieval. The close proximity between the signal source and the PVDF sensor(s) minimizes the attenuation and distortion of the signal along the transmitting path and provides high-fidelity si

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!