Dissertations / Theses on the topic 'E-component'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 50 dissertations / theses for your research on the topic 'E-component.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.
Mandala, Vinay Kumar. "e-Business Model Component Interconnections." Thesis, University of Skövde, School of Humanities and Informatics, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-982.
Full textThe accelerating growth of e-business and technologies has raised the interest in transforming traditional business models or developing new ones. Most of the e-business model research has been devoted to giving taxonomies of e-business models. Though defining e-business model and decomposing it into atomic elements traditionally has been a task for researchers, the concepts surrounding them have been subject to debate lately. While there is an extensive research conducted towards identifying and analyzing key components in e-business models, limited research has been noted in identifying component values or factors and the interconnections between components. In this thesis we review the e-business models literature using literature study in order to give an overview of e-business model definitions, identify the component values and interconnections between components and finally a framework provided that shows all these components, values and interconnections.
Taddei, Marco <1976>. "Il trattamento ortodontico nei bambini con particolari necessità sanitarie (SHCN): una valutazione della durata e del risultato clinico utilizzando l'indice PAR (Peer Assessment Rating), la componente DHC (Dental Health Component) e la componente AC (Aesthetic Component) dell'indice IOTN (Orthodontic Treatment Need Index)." Doctoral thesis, Alma Mater Studiorum - Università di Bologna, 2015. http://amsdottorato.unibo.it/6959/.
Full textPurpose: To analyze any differences in the orthodontic treatment between a group of children with special health care needs (SHCN) and a group of children not diagnosed with SHCN. Materials and Methods: The study sample (SHCN) consisted of 50 orthodontically treated children with SHCN. The control group (NO SHCN) consisted of 50 orthodontically treated children not diagnosed with SHCN fully matched for age, gender and type of appliance used with patients of the study sample. The differences between the SHCN and NO SHCN groups were analyzed retrospectively: - pre-, post-treatment scores and score reduction of the Peer Assessment Rating index (PAR), the Dental Health (DHC) and Aesthetic (AC) Components of the Orthodontic Treatment Need Index (IOTN), - number of appointments, - number of simple or complex chair time appointments, - overall treatment time, - age at treatment start and end. Results: There were no statistically significant differences between the two groups for the number of appointments, overall treatment time, age at treatment start and end (p values: 0.682, 0.458, 0.535 and 0.675). There were statistically significant differences between the two groups in PAR, DHC, AC pre- and post-treatment, and the number of simple and complex chair time appointments (p values: 0.030, 0.000, 0.020, 0.023, 0.000, 0.000, 0.043 and 0.037). The reductions of PAR, DHC and AC scores were not significantly different between the two groups (p values: 0.060, 0.765 and 0.825). Conclusions: This study, while reporting a greater number of complex chair time appointments during the orthodontic treatment of children with special health care needs, encourages orthodontists to implement the treatment of patients with SHCN, in an attempt to improve their quality of life.
Graf, Sebastian [Verfasser]. "Design and Optimization of Multi-Variant Automotive E/E Architecture Component Platforms / Sebastian Graf." München : Verlag Dr. Hut, 2015. http://d-nb.info/1079768335/34.
Full textMansur, Shérida Cunha. "Prevalência de má oclusão em crianças com idade escolar: Norte de Portugal." Master's thesis, [s.n.], 2015. http://hdl.handle.net/10284/5066.
Full textA má oclusão é considerada um problema de saúde pública, tanto pela sua epidemiologia quanto pela capacidade de ser prevenida e tratada. No presente trabalho foi realizado um estudo de carácter epidemiológico com o objetivo de avaliar a prevalência e gravidade da má oclusão em crianças com idade escolar, na dentição decídua/permanente, nas faixas etárias compreendidas entre 6-7 anos, 9-10 anos, 12-13 anos e 15-16 anos residentes no Concelho de Alijó, Portugal. Foram recolhidas através de um questionário e do exame clínico, informações sociodemográficas (escolaridade, idade, género) e características relativas à cavidade oral. No exame clínico foram observadas as seguintes características nos alunos examinados: a relação de molares, overjet e overbite, mordida cruzada anterior, posterior uni ou bilateral, diastemas, apinhamentos, irregularidade dentária, desvio de linha média e avaliação do Componente Estético do IOTN (Índice de Necessidade de Tratamento Ortodôntico). A amostra estudada inclui 207 alunos, 107 do género feminino e 100 do género masculino. No que se refere às más oclusões observadas, os resultados que mais se destacaram foram os seguintes: o apinhamento mandibular em 40,1% dos casos; o diastema maxilar em 40,6% dos casos; diastema central em 20,8% dos casos; irregularidade maxilar em 38,6% dos casos; overjet aumentado 39,7% da amostra dos casos; overbite foi a segunda má oclusão mais prevalente com 56% de observações; as mordidas abertas e cruzadas foram pouco relevantes; a Classe I foi a relação molar mais prevalente em 68,1% dos casos; os desvios da linha média inferior encontrados com cerca de 23% dos casos. Quanto à análise da autoperceção da aparência do sorriso a maioria (78,2%) dos alunos apresentaram Grau 1-2 segundo o Componente Estético do IOTN. Em relação à satisfação com o sorriso, a maioria estava satisfeito (46,3%) ou muito satisfeito (38,2%). Do mesmo modo, a maioria dos alunos acredita que não necessita de uso de aparelho ortodôntico (32,8%) ou que definitivamente não precisam de aparelho ortodôntico (20,2%). As más oclusões mais frequentemente observadas foram a relação de Classe I e o overbite. A alta prevalência de más oclusões foi observada na população de estudantes de Alijó examinados na pesquisa, mas com um nível relativamente elevado de satisfação com a própria estética oral. Concluindo, seria importante analisar a condição oral de crianças com idade escolar de forma a diagnosticar precocemente situações passíveis de prevenção e de tratamento. The malocclusion is considered a public health problem, both for its epidemiology as the ability to be prevented and treated. In order to assess the prevalence and severity of malocclusion in children of school age, in primary / permanent dentition, of the age groups between 6-7 years, 9-10 years, 12-13 years and 15-16 years in the municipality of Alijó, Portugal, an epidemiologic study was carried out. During the study, sociodemographic information (education, age, gender) and characteristics of the oral cavity were collected through questioning and clinical examination. On clinical examination the following characteristics were observed on the examined students: relation of molars, overjet and overbite, anterior, posterior unilateral or bilateral crossbite, spacing, crowding, tooth irregularity, midline shift, analietion of the Aesthetic Component of IOTN (Index of Orthodontic Treatment Need). The sample was composed of 207 students, out of whom 107 were females and 100 were males. The results which stood out in relation to malocclusions observed were: the mandibular crowding present in 40,1% of the cases; the maxillary spacing in 40,6% of the cases; midline spacing in 20,8% of the cases; maxillary irregularity in 38,6% of the cases; increased overjet 39,7% of the cases; overbite was the second most prevalent malocclusion with 56% observation; open and cross bites were of little relevance; Class I was relation of molars the most prevalent with 68, 1% of the cases; midline shift inferior was found in approximately 23%of the cases. The analysis of the self-perception of smile in the majority (78.2%) of the students had Grade 1-2 according to the Aesthetic Component of IOTN. As to the satisfaction with the smile, most were satisfied (46,3%) or very satisfied (38,2%) with their smile. Similarly, most students believe that they rather do not need orthodontic treatment (32,8%) or definitively not require any orthodontic treatment (20,2%). The most frequently observed malocclusions are Class I and overbite. A high prevalence of malocclusions was observed in the population of students of Alijó examined for the purpose of the research, yet with a relatively high level of oral aesthetic self-satisfaction. In conclusion, it seems that it would be important to analyse the oral conditions of children at school age in order to diagnose at an early stage cases, which could be prevented and / or treated.
Ji, Katrina Yun. "ADAP: A component-based model using design patterns with applications in E-Commerce." CSUSB ScholarWorks, 2000. https://scholarworks.lib.csusb.edu/etd-project/1694.
Full textHlungulu, Bulumko. "Building a semantic web-based e-health component for a multipurpose communication centre." Thesis, University of Fort Hare, 2010. http://hdl.handle.net/10353/374.
Full textMondego, Vanda Sueli. "Estudo dos resíduos eletroeletrônicos de uma prestadora de services do setor naval, com vistas ao gerenciamento ambiental." Universidade do Estado do Rio de Janeiro, 2012. http://www.bdtd.uerj.br/tde_busca/arquivo.php?codArquivo=4040.
Full textSummary: This research has used the case study to evaluate the e-waste generated in a Company acting n the Navy segment. After a reflection about the relationship between man and nature, the concept of solid waste and its classifications is presented, commenting the impact of the electric and electronic devices in Brazilian e-waste generation. Then, the evolution of the use of electricity and electronic until current days is mentioned, commenting the environmental aspects and impacts of the production and discard of electrical and electronic equipment that are manufactured with hazardous substances. Highlighting some alternatives ways to reuse, recovery and recycling that create new kind of business. The research then explains the environmental policy in the US and in Europe, and then moves into important facts acts in Brazilian environmental legislation, with special attention to National Policy of Solid Residues. This part ends up with the comments about the Brazilian navy alignment to environmental policy, by using the directions of legislation ISO 14.000. After that, there is a brief about the case study Company including its trajectory, pattern of organization and environmental management situation. In the following step, is detailed the methodology that was used, which kind of survey and process were adopted to characterize the electric and electronic residues, as well the proper management tools used to analyze the results. Then, is mentioned the actions and researches were developed, about the electric and electronic components process of generation and discard, in the Company under the study case.The data from the study were performed by using the environmental and manager knowledge, selecting those with potential to impact the environment the most and, using proper management tools, being presented the achieved results. Finalizing, the conclusions about the study and the suggestions to improve the management of e-waste were available to be used by the Company, also proposing the establishment of an integrated management system to all residues generating by the Company.
Eler, Marcelo Medeiros. ""Um método para o desenvolvimento de software baseado em componentes e aspectos"." Universidade de São Paulo, 2006. http://www.teses.usp.br/teses/disponiveis/55/55134/tde-04072006-114542/.
Full textAn investigation about how aspect oriented programming combined with the components technology can encapsulate the crosscuting concerns of a system is presented. As result of this research, a method for the aspect and component based software development is proposed, whose phases, activities and designs elements are shown by means of an example of a Hotel Reservation System, with its implementation in the JAsCO and AspectJ languages. The method is an extension of the UML Components method and uses UML with some adaptations. Moreover, a strategy to the generalization and documentation of crosscutting (or aspectual) components to be reused in other applications is proposed. Additionally, the proposed method was used to design a Car Rental System and the result was compared with another solution for the same problem, based on UML Components and a general architecture for Web systems. The results of the comparation are presented and discussed.
Sousa, Junior Carlos Magno. "Compressão de imagens utilizando análise de componentes independentes." Universidade Federal do Maranhão, 2007. http://tedebc.ufma.br:8080/jspui/handle/tede/440.
Full textRedundancy is an old issue in data compression research. Compression methods that use statistics have been heavily influenced by neuroscience research. In this work, we propose an image compression system based on the efficient coding concept derived from neural information processing models. The system performance is compared with discrete cosine transform (DCT) and principal components analysis (PCA) results at several compression ratios (CR). Evaluation through both objective measurements and visual inspection showed that the proposed system is more robust to distortions such as blocking artifacts than DCT and PCA.
A redundância é um assunto antigo em pesquisa sobre compressão de dados. Os métodos de compressão de dados que usam estatísticas foram recentemente influenciados pelas pesquisas em neurociência. Neste trabalho, propomos um sistema de compressão de imagem baseado no conceito de codificação eficiente derivado dos modelos de processamento da informação neural. O desempenho do sistema é comparado aos resultados da transformada discreta cosseno (DCT) e análise de componentes principais (PCA) com a mesma taxa de compressão (CR). A avaliação através das medidas objetiva e visual mostrou que o sistema proposto apresentou menos distorções, tais como artefatos de blocos do que a DCT e PCA.
Sousa, Humberto Costa de. "Um Framework para criação e simulação de Redes Neurais Artificiais utilizando Component Object Model." Universidade de São Paulo, 2000. http://www.teses.usp.br/teses/disponiveis/55/55134/tde-28022018-103002/.
Full textTasks involving Pattern Recognition are becoming more frequent in many applications. Most of these tasks have been efficiently handled by Artificial Neural Networks. One of the most common models used is the MLP (Multi-Layer Perceptron), though its performance is directly dependent on the chosen topology, which it must be set in the beginning of the training process. The choice of a Neural Network topology is not trivial, and usually becomes an exhaustive search for the most appropriate configuration. Several methods have been developed to automatically find a suitable Neural Network topology, including Constructive Neural Networks. These networks are trained by Constructive Algorithms which, starting from a minimal topology, gradually insert new neurons and connections, aming to improve the network\'s performance. Nevertheless, the evaluation of the best use of such algorithms in a given task depends on the homogeneity of the training environment. This work provides the definition of a set of abstract classes which allow different training algorithms, including Constructive Algorithms, to be built as components with strictly defined access in order to be used in different applications. By using these components in a new version of the Kipu Neural Network Simulator, it is possible to begin analyzing the efficiency of Constructive Neural Networks in real Pattern Recognition tasks.
Silva, Carlos Eduardo da. "Um modelo de interconex?o de componentes para ambientes mulitm?dia distribu?dos." Universidade Federal do Rio Grande do Norte, 2007. http://repositorio.ufrn.br:8080/jspui/handle/123456789/18095.
Full textMultimedia systems must incorporate middleware concepts in order to abstract hardware and operational systems issues. Applications in those systems may be executed in different kinds of platforms, and their components need to communicate with each other. In this context, it is needed the definition of specific communication mechanisms for the transmission of information flow. This work presents a interconnection component model for distributed multimedia environments, and its implementation details. The model offers specific communication mechanisms for transmission of information flow between software components considering the Cosmos framework requirements in order to support component dynamic reconfiguration
Sistemas multim?dia devem incorporar conceitos de middleware de forma a abstrair especificidades de hardware e sistemas operacionais. Aplica??es nestes sistemas podem ser executadas em diferentes tipos de plataformas, e os componentes destes sistemas precisam interagir uns com os outros. Neste contexto, faz-se necess?rio a defini??o de mecanismos de comunica??o espec?ficos para a transmiss?o de fluxos de informa??o. Este trabalho apresenta um modelo para a interconex?o de componentes em ambientes multim?dia, e sua arquitetura de implementa??o. O modelo oferece mecanismos de comunica??o espec?ficos para a transmiss?o de fluxos de informa??o entre componentes de software atendendo aos requisitos do framework Cosmos de maneira a suportar a reconfigura??o din?mica de componentes
Morimitsu, Alexandre. "Computação incremental e eficiente de sequências de árvores de componentes." Universidade de São Paulo, 2015. http://www.teses.usp.br/teses/disponiveis/45/45134/tde-12112015-150044/.
Full textComponent tree is a hierarchical way of representing gray-level images based on the inclusion relation of the connected components of the image. The choice of the neighborhood used to generate these components directly impacts in the resulting tree: changing the neighborhood used may cause a change in the resulting component tree. In particular, when considering a sequence of increasing neighborhoods, the nodes of the obtained from these neighborhoods will also satisfy an inclusion relation and that will make it possible to link nodes from different trees. Therefore, the main goal of this dissertation is the development of an efficient algorithm to build a sequence of component trees. In order to do that, we will introduce a class of sequences of neighborhood that not only satisfy the increasing property but also makes it possible to incrementally build the trees associated to it. This additional property will guide us to a novel algorithm, that will build the component trees associated to this class of neighborhoods. To show how efficient the proposed algorithm is, we present some experimental and theoretical results regarding time consumption and computational complexity.
Neves, Simone Cristina Ferreira. "Classificação de câncer de ovário através de padrão proteômico e análise de componentes independentes." Universidade Federal do Maranhão, 2012. http://tedebc.ufma.br:8080/jspui/handle/tede/490.
Full textThe ovarian cancer is difficult to diagnose in the early stages of development. In this work we bring a study of a new method that gave us great accuracy rates based on a bioinformatics tool called surface enhanced for laser desorption and ionization (SELDI-TOF) used to generate proteomic patterns which is one of the technologies advanced in the diagnosis. Our goal is to contribute to effectiveness of this tool, which already helps diagnosis earlier, our methodology uses independent component analysis (ICA) for feature extraction and neural networks to classify between malignancy and no malignancy in a database of the research center cancer in the U.S.A. Our work rates obtained acurracy 97%, 98% specificity and 96% sensitivity.
O câncer de ovário possui difícil diagnóstico nas primeiras fases de desenvolvimento. Neste trabalho trazemos um estudo de um novo método que nos deu ótimas taxas de precisão baseado em uma ferramenta da bio-informática chamada superfície mehorada a laser para ionização e dessorção (SELDI-TOF) usada para geração de padrões proteômicos que é uma das tecnologias mais avançada no auxílio ao diagnóstico. Nosso objetivo é contribuir para eficácia desta esta ferramenta, que já auxilia o dignóstico precoce, nossa metodologia usa análise de componentes independentes (ICA) para extração de caractéristicas e redes neurais para classificar entre malignidade e não malignidade em uma base de dados do centro de pesquisa do câncer nos EUA. Nosso trabalho obteve taxas de 97% de acurária, 98% de especifidade e 96 % de sensibilidade.
Lopes, Fernando Bezerra. "Ãndice de sustentabilidade do perÃmetro irrigado Baixo AcaraÃ-CearÃ." Universidade Federal do CearÃ, 2008. http://www.teses.ufc.br/tde_busca/arquivo.php?codArquivo=5231.
Full textEste trabalho teve como objetivo realizar uma anÃlise integrada da sustentabilidade do PerÃmetro Irrigado Baixo Acaraà (PIBAU), localizado na Bacia do Acaraà a norte do Estado do CearÃ, possibilitando o desenvolvimento de um Ãndice de sustentabilidade agro-ambiental. Para isso, aplicou-se uma amostragem exploratÃria, adotando um modelo de amostragem nÃo probabilÃstico, obtendo uma populaÃÃo amostral de 22 produtores agrÃcolas beneficiados pelo respectivo projeto de irrigaÃÃo e aplicando-se questionÃrios do tipo âcross-overâ. Nos lotes selecionados para a aplicaÃÃo dos questionÃrios, foi realizada uma avaliaÃÃo dos sistemas de irrigaÃÃo. Os fatores determinantes da sustentabilidade do PerÃmetro, bem como o Ãndice de sustentabilidade foram identificados pelo emprego da tÃcnica de AnÃlise Fatorial/AnÃlise da Componente Principal (AF/ACP). A pesquisa identificou que mais da metade dos produtores agrÃcolas apresentam baixo nÃvel educacional (64%) e que 77% dos irrigantes nÃo tinham experiÃncia com a prÃtica da agricultura irrigada antes de ser proprietÃrio de um lote no PerÃmetro. Apenas 18% dos sistemas de irrigaÃÃo localizada do PerÃmetro apresentam Coeficiente de Uniformidade de DistribuiÃÃo (CUD) classificado como excelente e 28% apresentam CUD classificado como ruim. Pelo teste de sensibilidade, efetuado utilizando-se o modelo da AF/ACP, identificou-se que, das 27 variÃveis que compunham a matriz inicial, apenas 12 delas apresentaram alguma significÃncia na explicaÃÃo da variÃncia total dos dados. O emprego do modelo promoveu a reduÃÃo de 12 caracterÃsticas dos fatores que influenciam a sustentabilidade do PerÃmetro para cinco componentes, que explicam 79,14% da variÃncia total. Os pesos atribuÃdos a cada fator indicaram que a sustentabilidade do PerÃmetro Baixo Acaraà estÃ, principalmente, relacionada à falta de conhecimento e do uso de tÃcnicas corretas de produÃÃo agrÃcola. Os Ãndices de sustentabilidade obtidos para cada unidade produtiva variaram no intervalo de 0,283 a 0,916. A mÃdia global de sustentabilidade dos lotes foi de 0,538 representando uma condiÃÃo de sustentabilidade comprometida. Apenas 9,0% das unidades produtivas estudadas encontram-se numa situaÃÃo de sustentabilidade equilibrada. Outros 18,2% dos produtores ainda sÃo considerados sustentÃveis, mas em condiÃÃo de ameaÃa, que pode advir de qualquer um dos fatores contabilizados no Ãndice. Quase metade dos colonos (45,5%) pesquisados registrou uma sustentabilidade que jà se apresenta de alguma forma comprometida e os demais (27,3%) estÃo em condiÃÃes de insustentabilidade. A unidade produtiva em estudo nÃo apresenta solos com problema de salinizaÃÃo, porÃm com exceÃÃo da camada inferior (0,90 a 1,20 m), para as demais camadas estudadas (0 a 0,30, 0,30 a 0,60 e 0,60 a 0,90 m) a adiÃÃo de sais ao solo pelo manejo inadequado da irrigaÃÃo foi altamente significativa. Apesar do solo nÃo apresentar risco de salinizaÃÃo e o sistema de irrigaÃÃo funcionar com uma uniformidade de distribuirÃo classificado como bom, a unidade em estudo apresenta Ãndice de sustentabilidade de 0,371, devido o Ãndice ser formado por um conjunto de variÃveis.
The aimed of this work was an integrated sustainability analysis of the Irrigated Perimeter of Baixo Acaraà (PIBAU) sited in Acaraà basin, CearÃ, Brazil. The analysis was labeled by an agro ecological sustainability index (ASI). The approach was based on 22 cross-over form applied to small producers that live in the PIBAU. In the irrigated areas selected to perform the interviews, it was developed the irrigation system evaluation. Factory Analysis/Principal Components Analysis (FA/PCA) was employed to select the factors sustainability indicators of the irrigated perimeter as well as to define the agro ecological sustainability index. Results showed that 64% of the producers had a power education and 77% of them had no experience with irrigation agriculture before. Also, it was identified that only 18% of irrigation systems presented an excellent CUD, while 28% of them were classified with a bad performance. According to the sensitive test effectuated by FA/PCA, only 12 of 27 variables that composed the initial matrix were significant to explain the total variance of data set. The 12 variables selected by the model were grouped in five factors explaining 79.14% of the total variance. The factors loading indicated that the PIBAU sustainability is, principally, related to the lack of acknowledgment as well as the used of suitable management of agricultural practices. The sustainability index of each productive units ranges from 0.283 to 0.916 and the average was 0.538. Only 9.0% of the pooled productivity were classified as sustainable, while 18.2% of them presented a kind of sustainability. Almost the half of producers (45.5%) showed a threatened sustainability and the others (27.3%) were in unsustainable condition. Also, it was identified that some units with a good irrigation system performance, without of salinization risk presented a low sustainability index (0.371). This is explained by the fact the index express an integration of different variables. Even though, no risk of salinization was identified, this work registered an addition high of significance of salt in the irrigated area when compared to undisturbed one.
Gonçalves, Jorge Luís Diz. "Prática de ensino supervisionado em educação pré-escolar." Master's thesis, Instituto Politécnico de Bragança, Escola Superior de Educação, 2010. http://hdl.handle.net/10198/4072.
Full textFrangioni, Desiré Spada dos Santos 1968. "Análise molecular da proteína HC-Pro (Helper Component-Proteinase) e seu papel na relação patógeno-hospedeiro /." Botucatu : [s.n.], 2006. http://hdl.handle.net/11449/105388.
Full textAbstract: The genus Potyvirus is one of the largest genera of plant RNA viruses. The potyvirus genome encodes a single polypeptide that is processed by three viral proteinases to yield all viral proteins needed for the infection cycle. One of these proteins is the multifunctional helper component proteinase (HC-Pro), which is involved in genome amplification, aphid transmission, local and systemic movement, suppression of gene silencing and proteolysis. To gain further understanding of the roles of this protein in the Potyvirus life cycle, the functional replacement of the HC-Pro coding region of Lettuce mosaic virus (LMV) with its corresponding counterpart of Potato virus Y (PVY) was performed. These viruses differ both in pathogenicity and in host range. LMV infects mainly Asteraceae while PVY infects Solanaceae. To assess the functional requirement of a homologous HC-Pro in infectivity, two different chimeric viruses were constructed i. e: a full-length LMV containing a wild type PVY HC-Pro (1aa to 352aa) and a full-length LMV containing a PVY HC-Pro with a mutation in the IGN motif (exchanged to RNP). The chimeras, and wild type LMV, were inoculated by biolistic in young lettuce plants. The presence and nature of viral progenies were checked by RT-PCR amplification followed by sequencing. All recombinant viruses were infectious and displayed systemic infection although the symptoms were weak when compared to the wild type LMV. The viruses accumulation were evaluated by differential cycles in the RT-PCR. The LMV wild type was amplified by 30 cycles while the chimerics viruses needed 40 cycles. Therefore this result indicating that the chimeric viruses titer were lower than LMV wild type. The results 4 described here demonstrated that the main biological functions of HC-Pro can be accomplished by heterologous protein.
Orientador: Marcelo Agenor Pavan
Coorientador: Ivan de Godoy Maia
Banca: Renate Krause Sakate
Banca: José Osmar Gaspar
Banca: João Roberto Spotti Lopes
Banca: Addolorata Colariccio
Doutor
Frangioni, Desiré Spada dos Santos [UNESP]. "Análise molecular da proteína HC-Pro (Helper Component-Proteinase) e seu papel na relação patógeno-hospedeiro." Universidade Estadual Paulista (UNESP), 2006. http://hdl.handle.net/11449/105388.
Full textConselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
O gênero Potyvirus é um dos maiores dentre os vírus de planta com genoma composto por RNA. O genoma dos potyvirus codifica um único polipeptídeo que é processado por três proteinases virais que originam todas as proteínas necessárias para complementar o ciclo da infecção. A proteína HC-Pro (Helper Component proteinase) é uma dessas proteínas multifuncionais que está envolvida na amplificação do genoma, transmissão por afídeo, movimento sistêmico e local, supressão do silenciamento gênico e proteólise. Nesse trabalho, foi realizada a substituição funcional de parte da região codificadora da HC-Pro do Lettuce mosaic virus (LMV) com a porção correspondente à HC-Pro do Potato virus Y (PVY), com o objetivo de melhor compreender os papéis dessa proteína no ciclo de infecção dos potyvirus. O LMV e o PVY diferem tanto em patogenicidade quanto em círculo de hospedeiros. O LMV infecta, principalmente, espécies da família Asteraceae (alface) enquanto o PVY infecta Solanaceae. Para avaliar o efeito de tal substituição na infectividade, dois vírus quiméricos foram construídos: um clone infeccioso de LMV contendo a HC-Pro selvagem do PVY (estendendo-se dos aminoácidos 1 a 352) e um segundo clone contendo a HC-Pro de PVY com mutação no motivo conservado IGN (mutado para RPN). Os vírus recombinantes e o LMV selvagem foram inoculados via biobalística em folhas de plântulas de alface cv. Trocadero (suscetível ao LMV). A presença e a natureza das progênies virais...
The genus Potyvirus is one of the largest genera of plant RNA viruses. The potyvirus genome encodes a single polypeptide that is processed by three viral proteinases to yield all viral proteins needed for the infection cycle. One of these proteins is the multifunctional helper component proteinase (HC-Pro), which is involved in genome amplification, aphid transmission, local and systemic movement, suppression of gene silencing and proteolysis. To gain further understanding of the roles of this protein in the Potyvirus life cycle, the functional replacement of the HC-Pro coding region of Lettuce mosaic virus (LMV) with its corresponding counterpart of Potato virus Y (PVY) was performed. These viruses differ both in pathogenicity and in host range. LMV infects mainly Asteraceae while PVY infects Solanaceae. To assess the functional requirement of a homologous HC-Pro in infectivity, two different chimeric viruses were constructed i. e: a full-length LMV containing a wild type PVY HC-Pro (1aa to 352aa) and a full-length LMV containing a PVY HC-Pro with a mutation in the IGN motif (exchanged to RNP). The chimeras, and wild type LMV, were inoculated by biolistic in young lettuce plants. The presence and nature of viral progenies were checked by RT-PCR amplification followed by sequencing. All recombinant viruses were infectious and displayed systemic infection although the symptoms were weak when compared to the wild type LMV. The viruses accumulation were evaluated by differential cycles in the RT-PCR. The LMV wild type was amplified by 30 cycles while the chimerics viruses needed 40 cycles. Therefore this result indicating that the chimeric viruses titer were lower than LMV wild type. The results 4 described here demonstrated that the main biological functions of HC-Pro can be accomplished by heterologous protein.
Barana, Marcia. "O design de superfícies como componente em produtos bi e tridimensionais." Universidade Estadual Paulista (UNESP), 2018. http://hdl.handle.net/11449/153987.
Full textApproved for entry into archive by Lucilene Cordeiro da Silva Messias null (lubiblio@bauru.unesp.br) on 2018-05-16T20:03:48Z (GMT) No. of bitstreams: 1 barana_m_me_bauru.pdf: 2873535 bytes, checksum: 6b0b7ecbf65d3b7700e5a71721882f19 (MD5)
Made available in DSpace on 2018-05-16T20:03:48Z (GMT). No. of bitstreams: 1 barana_m_me_bauru.pdf: 2873535 bytes, checksum: 6b0b7ecbf65d3b7700e5a71721882f19 (MD5) Previous issue date: 2018-03-20
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Esta Dissertação de Mestrado demonstra, em sua análise inicial, um balizamento de conceitos de Design de Superfícies (DS) estabelecidos no Brasil por sua expressividade na atividade acadêmica e atuação no Mercado, considerando-se principalmente as publicações a partir dos anos 2000. Tal delimitação se dá por proximidade local e interesse da autora. Identificou-se, em primeira análise, complementação conceitual acerca do tema envolvendo a principais referências no Brasil, como Rubim (2005) e Rüthschilling (2008), Barachini (2002) e Schwartz (2008). Esta última explicitando o quanto as superfícies e o Design de Superfícies podem ser explorados tridimensionalmente e reforçam o âmbito projetual, fornecendo ainda os conceitos de Superfície-objeto e Superfície-envoltório, acrescidos de sua caracterização de acordo com as abordagens: Representacional, Constitucional e Relacional, estabelecidas por Schwartz (2008). Com os conceitos propostos pelas referências, foi possível apontar, como resultado parcial, a complementação do conceito tomado como inicial sobre o do Design de Superfícies, trazendo notoriedade e observação da superfície como componente de um objeto, seja ela aparente ou não. Fazendo uma analogia com área médica, trata-se não só a função “pele” por vezes associado à superfície, mas a possibilidade de funcionar como “epiderme”, camadas internas, que podem ter funções diversas como estruturante, filtrante, isolante, por exemplo, podendo oferecer uma experiência mais que estética, sobretudo funcional, mesmo que ainda oculta no resultado final do produto. O termo componente é tratado como parte que comporá um produto final. Assim, o escopo estabelecido tem o intuito de acrescentar um olhar sobretudo de aspecto técnico-funcional que os produtos do Design de Superfícies, seja de origem bidimensional ou tridimensional, possam acrescentar aos campos tradicionalmente conhecidos, como o design têxtil e de revestimentos. Enfatiza-se sua interação e participação no Design de Produto e o Design de Materiais, considerando que o resultado de um projeto de Design de Superfície, nem sempre será apresentado na superfície em sua configuração final. Para esta realização, a pesquisa se deu por meio de entrevistas abrangendo instituições de Ensino e do mercado potencial de uso do Design de Superfícies. Devido ao significado da palavra superfície restringir-se à superfície, o trabalho resultou com a proposição de uma abordagem complementar do Design de Superfícies, a partir da caracterização de Schwartz (2008), complementando-a como Design de Superfícies como componente, superfície-componente.
ABSTRACT This Master's Dissertation demonstrates in its initial analysis a beaconing of Surface Design (DS) concepts, established in Brazil, for its expressivity in academic activity and performance in the Market, mainly considering publications from the 2000s. Su ch delimitation is due to local proximity and author’s interest. A conceptual complementation on the theme involving the main references in Brazil, such as Rubim (2005) and Rüthschilling (2008), Barachini (2002) and Schwartz (2008) were identified in the f irst analysis. The latter explains how surfaces and Surface Design can be explored three - dimensionally and emphasize the project scope, providing the concepts of Surface - object and Surface - wrapping, plus their characterization according to the approaches: Representational, Constitutional and Relational, established by Schwartz (2008). Considering concepts proposed by the references, it was possible to point out, as a partial result, the complementation of the concept taken as initial on the one of the Desig n of Surfaces, bringing notoriety and observation of the surface as component of an object, be it apparent or not. Analogous to the medical field, it is not only the function "skin" sometimes associated with the surface, but the possibility of functioning as an "epidermis", internal layers, which can have diverse functions as structuring, filtering, insulating, for example, and can offer a more than aesthetic experience, especially functional, even if still hidden in the final product result. The term compo nent is treated as part that will make up an end product. Thus, the purpose of the scope is to add a technical - functional look that Surface Design products, whether of two - dimensional or three - dimensional origin, can add to the traditionally known fields, such as textile design, of coatings. It emphasizes their interaction and participation in Product Design and Materials Design, considering that the result of a Surface Design project will not always be presented on the surface in its final configuration. F or this realization, the research was conducted through interviews involving teaching institutions and the potential market for the use of Surface Design. Due to the meaning of the word surface, it is restricted to the surface, the work resulted in the pro position of a complementary approach to Surface Design, based on the characterization of Schwartz (2008), complementing it as Surface Design as component, surface - component
330045056082PO
Bril, Marco. "Impacto dos países desenvolvidos e emergentes na economia brasileira." reponame:Repositório Institucional do FGV, 2013. http://hdl.handle.net/10438/15549.
Full textApproved for entry into archive by GILSON ROCHA MIRANDA (gilson.miranda@fgv.br) on 2016-02-22T14:03:07Z (GMT) No. of bitstreams: 1 Tese Mestrado Marco Bril.pdf: 1223942 bytes, checksum: e8c41cd4b4f9345cbe52d71959bebbd2 (MD5)
Approved for entry into archive by Maria Almeida (maria.socorro@fgv.br) on 2016-02-25T13:08:48Z (GMT) No. of bitstreams: 1 Tese Mestrado Marco Bril.pdf: 1223942 bytes, checksum: e8c41cd4b4f9345cbe52d71959bebbd2 (MD5)
Made available in DSpace on 2016-02-25T13:08:58Z (GMT). No. of bitstreams: 1 Tese Mestrado Marco Bril.pdf: 1223942 bytes, checksum: e8c41cd4b4f9345cbe52d71959bebbd2 (MD5) Previous issue date: 2013-05-24
This dissertation compares the behavior of the Brazilian economy to emerging and developing markets through principal component analysis. There were used variables of economic growth, as PMI; and macroeconomic variables, such as inflation, stock exchange, currency and interest rates. To achieve more consistent results, there were done two different analyses. The first one has compared these variables from different countries to the Brazilian PMI; whereas the second one has separated the later analysis in different time periods, in order to differentiate the period before and after the 2009 crisis.
A proposta desta dissertação é analisar o comportamento econômico brasileiro em relação às demais economias de países emergentes e desenvolvidos, utilizando-se como metodologia a análise de componentes principais com variáveis de crescimento econômico e macroeconômicas como inflação, bolsa, moeda e juros. Visando obter uma robustez maior nos resultados foram realizados dois exercícios, primeiro buscou-se comparar o resultado obtido para o Brasil com outros países. No segundo exercício a comparação foi realizada para diferentes períodos de tempo, de maneira de separar o período em pré e pós-crise de 2009.
Levada, Alexandre Luís Magalhães. "Extração de atributos em imagens de sensoriamento remoto utilizando Independent Component Analysis e combinação de métodos lineares." Universidade Federal de São Carlos, 2006. https://repositorio.ufscar.br/handle/ufscar/318.
Full textUniversidade Federal de Sao Carlos
Methods for feature extraction represent an important stage in statistical pattern recognition applications. In this work we present how to improve classification performance creating a feature fusion framework to combine second and higher order statistical methods, avoiding existing limitations of the individual approaches and problems as ill-conditioned behavior, which may cause unstable results during the estimation of the independent components (whitening process) and eventual noise amplifications. The resulting scheme is used to combine features obtained from a variety of methods into a unique feature vector defining two approaches: Concatenated and Hierarquical Feature Fusion. The methods are tested on both multispectral and hyperspectral remote sensing images, which are classified using the maxver (maximum likelihood) approach. Results indicate that the technique outperforms the usual methods in some cases, providing a valid useful tool for multivariate data analysis and classification.
Métodos para extração de atributos compõem uma etapa fundamental em aplicações na área de reconhecimentos de padrões. O presente trabalho apresenta uma metodologia para melhorar o desempenho da classificação criando modelos para fusão de atributos que combinam métodos estatísticos de segunda ordem com métodos de ordens superiores, superando limitações existentes nas abordagens tradicionais, como problemas de mal-condicionamento, o que pode provocar instabilidade na estimação dos componentes independentes, além de eventuais amplificações de ruídos. O esquema resultante é utilizado para combinar atributos obtidos através de diversos métodos num único vetor de padrões em duas abordagens: Fusão Concatenada e Fusão Hierárquica. A metodologia proposta é aplicada em diversos estudos de casos, incluindo imagens multiespectrais e hiperespectrais de sensoriamento remoto, classificadas utilizando-se a abordagem de máxima verossimilhança. Resultados indicam que essa metodologia supera métodos de segunda ordem tradicionais em alguns casos, constituindo um válido e interessante ferramental para análise e classificação de dados multivariados.
MORTILLARO, MARCELLO. "Analisi componenziale dell'esperienza emotiva: studio delle componenti espressiva e fisiologica e implicazioni per l'affective computing." Doctoral thesis, Università Cattolica del Sacro Cuore, 2007. http://hdl.handle.net/10280/156.
Full textEven if emotion has been studied for many years, it still remains quite unknown in some aspects. Among others, vocal expression and physiology of emotions produced very few widely accepted results. Such an outcome can be explained through the adoption of the component process model of emotion by Scherer. In his theory emotions are processes in which a number of different components are involved, among others expressive and physiological ones. As a consequence emotions can be explained only through a multi-component approach. Three studies are performed. The first investigated emotional expression, finding some correspondences with component predictive model for vocal expression. The second analyzed autonomic activity of emotions, sustaining its function of resources mobilization. The third combined the two components, finding some aspects of their integration and inter-dependency. Finally, concerning affective computing paradigm, a componential approach to emotion automatic recognition is suggested.
Martins, Daiany Augusta Paes. "Restauração de áreas degradadas por exploração mineral no Planalto Catarinense." Universidade do Estado de Santa Catarina, 2017. http://tede.udesc.br/handle/handle/2345.
Full textMade available in DSpace on 2017-12-14T14:29:41Z (GMT). No. of bitstreams: 1 PGEF17MA081.pdf: 3522802 bytes, checksum: 3cd9d4172b3367e2c998114fe05428a1 (MD5) Previous issue date: 2017-03-09
FAPESC
This work had as objective evaluate the potential techniques of nucleation and forest residue in the restoration of degraded areas by gravel extraction process.To that end, 68 plots were installed in total, 40 of them in the area called Westarp, where the soil is Alumínico Humic Cambisols and the 28 others in Lauro area, where the soil was built with forest residue. Both areas were composed by different nucleation techniques: artificial perches, brushwood windrowing, litterfall and soil’s seed bank transposition, and planting of native trees in groups. The plots size were 1 m x 1 m, except for the planting in groups. All individuals regenerating above 10 cm high in the plots were accounted for, identified and classified in terms of the way of life, guild regeneration and dispersal syndrome. Were determined the following chemical properties (pH in water, MO, K, Ca, Mg, Al, P, Cu, Zn, Mn and total tenor of soluble salts) and the following Physical properties (total porosity, density, easily available water and soil resistance in penetration) of the soil. Regenerative component data were analyzed through Shannon-Wiener index of diversity (H'), equability of Pielou (J), Morisita index of dispersion and non-metric multidimensional scaling (NMDS). The presence of fauna was determined by evidence in different techniques. It was conducted a grouping analyses to collect the data of the planting in groups using Ward binding method and later discriminant analysis, also was calculated the survival rate. Were found 3328 regenerating individuals belonging to 85 species, summarised in 19 families and 53 genres. The greatest wealth families were Poaceae, Asteraceae, Cyperaceae and Fabaceae. In relation to the way of life: Herbaceous (80%); shrubby (18%) and tree (2%). As for the Guild regeneration: Pioneer (79%); Initial secondary (20%) and Late secondary (1%). Regarding dispersal syndrome: 53% Anemochoric; 35% Autochorous and 12% Zoochoric. The greater richness and diversity were observed in Lauro area and NMDS has shown that the regenerative component presented distinction in floristic and structural, mainly due to soil conditions. The litterfall and soil’s seed bank transposition and brushwood windrowing the most efficient techniques for the restoration of degraded areas. The grouping analysis technique and discriminant analysis enabled the formation of three distinct groups composed by species with similar growth. The species that showed potential for restoration under the conditions studied were Mimosa scabrella, Schinus terebinthifolius, Gymnanthes klotzschiana, Inga marginata and Allophylus edulis for Westarp and Schinus terebinthifolius, Schinus molle, Annona sylvatica, Vitex megapotamica and Gymnanthes klotzschiana for Lauro. The estimated cost with the implantation of nucleation techniques of restoration was of R$ 17.469,00/ha. It is concluded that the nucleation techniques deployed and the residue used as soil showed the potential to be used in the restoration of degraded areas, but temporal character studies of the biological attributes of soil and environmental characterization of the area must be done for inferences more conclusive about track of the areas
Este trabalho teve como objetivo avaliar a potencialidade de técnicas de nucleação e do resíduo florestal na restauração de áreas degradadas pelo processo de extração de cascalho. Para tal, foram instaladas 68 parcelas, sendo 40 na área denominada Westarp, cujo solo é Cambissolo Húmico Alumínico e 28 parcelas na área Lauro, cujo solo foi construído com resíduo florestal. Ambas as áreas foram compostas por diferentes técnicas nucleadoras: poleiro artificial, enleiramento de galharia, transposição de serapilheira e do banco de sementes do solo e plantio em núcleo de Anderson. A dimensão das parcelas foi de 1 m x 1 m, exceto para o núcleo de Anderson. Todos os indivíduos regenerantes acima de 10 cm de altura presentes nas parcelas foram contabilizados, identificados e classificados quanto à forma de vida, guilda de regeneração e síndrome de dispersão. Foram determinadas as seguintes propriedades químicas (pH em água, teores de MO, K, Ca, Mg, Al, P, Cu, Zn, Mn e teor total de sais solúveis) e físicas (porosidade, densidade, água facilmente disponível e resistência do solo à penetração) do solo. Os dados do componente regenerativo foram analisados por meio do índice de diversidade de Shannon-Wiener (H’), equabilidade de Pielou (J), índice de dispersão de Morisita e escalonamento multidimensional não métrico (NMDS). A presença da fauna foi averiguada por meio de vestígios nas diferentes técnicas. Para os dados do plantio em núcleo de Anderson foi realizada a análise de agrupamento pelo método de ligação Ward e posterior análise discriminante, além de calculada a taxa de sobrevivência. Foram encontrados 3328 indivíduos regenerantes pertencentes a 85 espécies, reunidas em 19 famílias e 53 gêneros. As famílias de maior riqueza foram Poaceae, Asteraceae, Cyperaceae e Fabaceae. Em relação à forma de vida: Herbácea (80%), Arbustiva (18%) e Arbórea (2%). Quanto à guilda de regeneração: Pioneira (79%); Secundária Inicial (20%) e Secundária Tardia (1%). Quanto à síndrome de dispersão: 53% Anemocórica; 35% Autocórica e 12% Zoocórica. A maior riqueza e diversidade foram observadas para a área Lauro e a NMDS mostrou que o componente regenerativo apresentou diferenciação florístico e estrutural, sobretudo em função das condições edáficas. A transposição de serapilheira e do banco de sementes do solo e o enleiramento de galharias foram às técnicas mais eficientes para a restauração das áreas degradadas. A técnica de análise de agrupamento e análise discriminante possibilitou a formação de três grupos distintos compostos por espécies com crescimento semelhantes. As espécies que apresentaram potencial para restauração nas condições estudadas foram Mimosa scabrella, Schinus terebinthifolius, Gymnanthes klotzschiana, Inga marginata e Allophylus edulis para Westarp e Schinus terebinthifolius, Schinus molle, Annona sylvatica, Vitex megapotamica e Gymnanthes klotzschiana para Lauro. Os custos estimados com a implantação das técnicas nucleadoras de restauração foi de R$ 17.469,00/ha. Conclui-se que as técnicas nucleadoras implantadas e o resíduo utilizado como solo apresentaram potencial para serem utilizados na restauração de áreas degradadas, porém estudos de caráter temporal dos atributos biológicos do solo e de caracterização ambiental da área devem realizados para inferências mais conclusivas sobre a trajetória das áreas
Riedelsheimer, Christian [Verfasser], and Albrecht E. [Akademischer Betreuer] Melchinger. "Genome-wide association mapping of molecular and physiological component traits in maize / Christian Riedelsheimer. Betreuer: Albrecht E. Melchinger." Hohenheim : Kommunikations-, Informations- und Medienzentrum der Universität Hohenheim, 2014. http://d-nb.info/1047839717/34.
Full textYusuf, Rahmi. "Synecdoche, two-component systems : E. coli EnvZ/OmpR as a model of transmembrane communication and chimeric biosensor design." Thesis, University of Portsmouth, 2019. https://researchportal.port.ac.uk/portal/en/theses/synecdoche-twocomponent-systems-e-coli-envzompr-as-a-model-of-transmembrane-communication-and-chimeric-biosensor-design(8d99cbe9-a70f-4320-9615-c5f27b6e0d2a).html.
Full textGomes, Rodrigo San Martin Ignacio. "Avaliação do filtro sensório-motor através de registro de eletroencefalograma (EEG) e teste de inibição pré-pulso (IPP) em pacientes após primeiro episódio psicótico." reponame:Repositório Institucional da UFABC, 2017.
Find full textCoorientador: Prof. Dr. Francisco José Fraga da Silva
Dissertação (mestrado) - Universidade Federal do ABC, Programa de Pós-Graduação em Neurociência e Cognição, São Bernardo do Campo, 2017.
Pacientes de transtorno bipolar e esquizofrenia apresentam déficits no processamento de informação. Dentre esses déficits está uma disfunção do mecanismo de filtragem sensorial, que pode ser observada através do teste de Inibição Pré-Pulso (IPP), que acessa a inibição das respostas muscular, observada por eletromiografia (EMG) e neural, observada por eletroencefalograma (EEG) através da inibição de potenciais evocados, como o P2-N1. No fenômeno da IPP, é observado que a resposta iniciada por um estímulo de alta intensidade é reduzida quando este é precedido em alguns milissegundos (30-300ms) por outro estímulo de baixa intensidade. Esses estímulos são respectivamente chamados de Pulso (P) e Pré-Pulso (PP). A porcentagem de redução da resposta ao P, quando este é precedido por um PP é calculada em relação à magnitude de resposta que seria evocada pelo P quando este não é precedido por PP algum. O presente estudo visou avaliar o filtro sensorial através do registro simultâneo dos sinais eletromiográficos e eletroencefalográficos em pacientes brasileiros de primeiro episódio psicótico de transtorno bipolar (BP) e esquizofrenia (SZ). Vinte pacientes BP, quinze pacientes SZ e 22 sujeitos sadios participaram do estudo. Pacientes SZ apresentam redução da %IPP observada por EMG em relação a pessoas sadias, ao passo que pacientes do grupo BP não apresentam redução da filtragem sensório-motora. Para a IPP neural, foi observada redução na amplitude de P do grupo BP na região frontal, avaliada pelo eletrodo Fz e redução da amplitude de P e também na %IPP para os grupos BP e SZ na região parietal, avaliada pelo eletrodo Pz. Os resultados indicam que a redução da filtragem sensorial foi observada em diferentes estágios do processamento sensorial. E a divergência entre IPP clássica e IPP neural para o grupo BP sugere que a IPP medida por EMG clássica e medida por EEG refletem filtros sensoriais diferentes e que pacientes de diferentes grupos podem exibir déficits em um desses filtros apenas. O presente trabalho é o pioneiro na utilização de ferramentas de atenuação de artefatos contaminantes do sinal neural no teste de IPP neural.
Patients with bipolar disorder and schizophrenia have deficits in information processing. Among these deficits is a dysfunction of the sensory filtering mechanism, which can be observed through the Prepulse Inhibition (PPI) test, which accesses the inhibition of muscle responses, observed by electromyography (EMG) and neural, observed by electroencephalogram (EEG) through inhibition of evoked potentials, such as P2-N1. In the PPI phenomenon, it is observed that the response initiated by a high intensity stimulus is reduced when it is preceded in a few milliseconds (30-300ms) by another low intensity stimulus. These stimuli are respectively called Pulse (P) and Prepulse (PP). The reduction percentage of the response to P when it is preceded by a PP is calculated in relation to the magnitude of response that would be evoked by P when it is not preceded by any PP. The present study aimed to evaluate the sensory filter through the simultaneous recording of electromyographic and electroencephalographic signals in Brazilian patients with first psychotic episode of bipolar disorder (BP) and schizophrenia (SZ). Twenty BP patients, fifteen SZ patients and 22 healthy subjects participated in the study. SZ patients presented a reduction in the %PPI observed by EMG when compared to healthy individuals, whereas patients in the BP group did not show reduction of sensory-motor filter. For the neural PPI, a reduction in BP group P amplitude was observed in the frontal region, evaluated by the Fz electrode. Also, was observed a reduction in the P amplitude and in the %PPI for the BP and SZ groups in the parietal region, evaluated by the Pz electrode. These results indicate that the reduction of sensorial filtration was observed at different stages of sensorial processing. And the divergence between classical IPP and neural IPP for the BP group suggests that PPI measured by classical EMG and measured by EEG reflect different sensory filters and that patients from different groups may exhibit deficits in one of these filters only. The present work is the pioneer in the use of attenuation tools to reduce contaminating artifacts in PPI test neural signal.
Almeida, Clarice Maboni de. "RELAÇÃO SOLO-FITOSSOCIOLOGIA EM UM REMANESCENTE DE FLORESTA ESTACIONAL DECIDUAL." Universidade Federal de Santa Maria, 2010. http://repositorio.ufsm.br/handle/1/8672.
Full textO estudo objetivou avaliar a vegetação arbórea e arbustiva em relação à formação de agrupamentos, declividade do terreno e influência do solo nos agrupamentos em Floresta Estacional Decidual. A avaliação da vegetação foi realizada em 14 parcelas distribuídas sistematicamente na floresta e divididas em subparcelas de 10 x 10 m, onde foram observados os indivíduos com CAP (circunferência a 1,3 m do solo) ≥ 30 cm, os quais representaram a classe I, e indivíduos com 15 ≤ CAP < 30 cm, representando a classe II. Na análise da vegetação utilizou-se o método TWINSPAN (Two-way Indicator Species Analysis) para classificação de grupos, dentro dos quais foi estudada a estrutura horizontal da floresta. Em 36 subparcelas foi realizada a descrição morfológica do perfil do solo, coletada amostra para análise química e determinação de argila em três profundidades (0-10, 10-20 e 20-30 cm), além da declividade, que foi classificada em baixa (1 ≥ 15º), média (15 ≥ 35º) e alta (≥ 35º). A relação com os grupos e características do solo foi estudada por meio de Análise de Componente Principal (PCA). No G1 as espécies indicadoras foram Trichilia claussenii, Cupania vernalis e Crysophyllum marginatum e no grupo G2 Luehea divaricata e Sebastiania commersoniania. Na estrutura horizontal essas espécies estiveram entre as três melhores representadas. Ambos os agrupamentos ocorreram em áreas com variáveis declividades, entretanto, o G2 ocorreu em ambiente mais susceptível às interferências na vegetação. A partir do PCA observou-se que as características do solo e declividade explicaram 26% da variabilidade total, sendo que desses 72% foi explicado no componente principal 1, demonstrando forte correlação entre as características dos solos e a presença dos grupos fitossociológicos em diferentes declividades. Essa relação foi mais expressiva para a presença dos dois grupos nos intervalos de média e alta declividade, por outro lado, em declividade baixa os dois grupos não apresentaram correlação positiva com as características do solo. Para G1 em alta e G2 em média e alta declividade, a correlação é positiva em relação ao conjunto de características de troca catiônica. Entretanto, o G1 em declividade média teve forte correlação com o complexo de acidez trocável. O G2 em maior declividade também apresenta alta correlação com a argila, essa textura mais fina talvez confira um maior poder de agregação e reatividade, permitindo o desenvolvimento de espécies de grande porte como Luehea divaricata e Cordia americana. De forma geral, devido às restrições de solo e declividade, a manutenção do remanescente é prioritária visando importantes serviços ambientais à região.
Alexandre, Segundo Jailton Maciel. "Seleção automatizada de componentes de software orientada por métricas estruturais e informações de reúso." Universidade Federal da Paraíba, 2014. http://tede.biblioteca.ufpb.br:8080/handle/tede/6131.
Full textCoordenação de Aperfeiçoamento de Pessoal de Nível Superior
The great difficulty of selecting software components is still an obstacle to achieving the success of Component-Based Development (CBD). With the growing market for components, the tendency is always to increase the number of options for assembling applications in different contexts, making it impractical to manual selection. Dealing with a problem of gigantic and complex search space, it is required automation performed by optimization techniques. The proposed approach aims to automate the process of selecting components using techniques of Search-Based Software Engineering (SBSE), whose optimization technique is driven by structural metrics (i.e., connections between components of a software architecture) and information reuse (i.e., aggregated values to the component itself). The metrics used in this component selection context are intended to assess the structural perspective of an architectural instance, since they predict possible integration problems between implementations of components produced by third parties. Note that other proposals ignore this perspective and focus only on the component itself. In addition, reuse information can bring an alternative to represent the perception of the developers about the quality attributes of the software components in a reuse scenario as: the degree of consumers' satisfaction who have already purchased this component and the number of downloads of it. The proposed evaluation is carried out through experiments, which are validated by applying statistical tests.
A grande dificuldade de selecionar componentes de software ainda é um obstáculo para alcançar o sucesso do Desenvolvimento Baseado em Componentes (DBC). Com o crescimento do mercado de componentes, a tendência é sempre aumentar o número de opções para montagem de aplicações em diferentes contextos, tornando impraticável a seleção manual. Tratando de um problema com gigantesco espaço de busca e complexo, é requerida a automatização efetuada por técnicas de otimização. O trabalho proposto visa automatizar o processo de seleção de componentes utilizando técnicas da Engenharia de Software Baseada em Busca (ESBB), cuja técnica de otimização é orientada por métricas estruturais (avaliam as conexões entre componentes de uma arquitetura de software) e informações de reúso (i.e., valores correspondentes ao reúso de software agregados ao próprio componente). As métricas utilizadas neste contexto de seleção de componentes têm o propósito de avaliar a perspectiva estrutural de uma instância arquitetural, já que elas preveem possíveis problemas de integração entre implementações de componentes produzidas por terceiros, além de que muitos problemas ignoram essa perspectiva e só focam no componente em si. Já as informações de reúso trazem consigo uma alternativa para representar a percepção dos desenvolvedores sobre os atributos de qualidade dos componentes de software em cenários de reúso, tais como: o grau de satisfação dos consumidores que já adquiriram tal componente e o número de downloads do mesmo. A avaliação da proposta é conduzida através de experimentos, que são validados aplicando testes estatísticos.
Guimarães, Eliane Gomes. "Um modelo de componentes para aplicações telematicas e ubiquas." [s.n.], 2004. http://repositorio.unicamp.br/jspui/handle/REPOSIP/261275.
Full textTese (doutorado) - Universidade Estadual de Campinas, Faculdade de Engenharia Eletrica e de Computação
Made available in DSpace on 2018-08-04T04:09:19Z (GMT). No. of bitstreams: 1 Guimaraes_ElianeGomes_D.pdf: 1203376 bytes, checksum: 8baa98d5b0b9753d8a292e0c940b5f41 (MD5) Previous issue date: 2004
Resumo: Esta tese descreve CM-tel, um modelo de componentes para aplicações telemáticas e ubíquas. CM-tel é neutro em termos de tecnologia, sendo especificado por meio da linguagem UML (Unified Modeling Language). Componentes CM-tel são capazes de executar em plataformas destinadas tanto a computadores tradicionais quanto a dispositivos com limitado poder computacional tais como dispositivos móveis. CM-tel define os três tipos de interfaces prescritas pelo Modelo de Referência para Processamento Distribuído Aberto (RM-ODP), as interfaces operacional, de sinal e de fluxo contínuo. Interfaces de fluxo contínuo são fundamentais para o desenvolvimento de aplicações telemáticas. A arquitetura do contêiner CM-tel integra componentes e agentes móveis em um único ambiente computacional. Esta integração permite que aplicações implementem suas funcionalidades combinando componentes e agentes móveis. Esta tese propõe ainda uma arquitetura para plataformas de software que suportam o modelo CM-tel. A arquitetura utiliza XSLT (XML Stylesheet Language Transformation) para transformação de modelos e geração de código. Uma plataforma baseada na tecnologia CORBA (Common Object Request Broker Architecture) e uma aplicação na área de laboratórios virtuais foram implementadas com a finalidade de avaliar o modelo CM-tel
Abstract: This thesis describes CM-tel, a component model for telematic and ubiquitous applications. CMtel is neutral in terms technology and is specified through the Unified Modeling Language (UML). CM-tel components can execute on platforms targeted to both conventional computers and devices with limited computing power such as mobile devices. CM-tel defines the three types of interfaces prescribed by the Reference Model for Open Distributed Processing (RM-ODP), the operational, signal, and stream interfaces. Stream interfaces are central to the development of telematic applications. The CM-tel container architecture integrates both components and mobile agents into a single computing environment. This integration allows applications to implement their functionalities by combining components and mobile agents. This thesis also proposes an architecture for software platforms supportting the CM-tel component model. The architecture relies on XSLT (XML Stylesheet Language Transformation) for model transformation and code generation. A platform based on the CORBA (Common Object Request Broker Architecture) technology and an application in the field of virtual laboratories were implemented in order to assess the CM-tel component model
Doutorado
Engenharia de Computação
Doutor em Engenharia Elétrica
AMARAL, Rogério Carlos Costa do. "Proposição de método multivariado de estratificação vertical em floresta natural." Universidade Federal Rural de Pernambuco, 2011. http://www.tede2.ufrpe.br:8080/tede2/handle/tede2/5302.
Full textMade available in DSpace on 2016-08-12T13:16:54Z (GMT). No. of bitstreams: 1 Rogerio Carlos Costa do Amaral.pdf: 760437 bytes, checksum: 9de9173672ad02506251f06196b89ca6 (MD5) Previous issue date: 2011-08-22
The objective of this research was to propose a new methodology for vertical stratification of natural forests, based on total tree height, from the application of multivariate techniques. The methodology was compared to others methods used in forest stratification. The structural data used in this work came from a research by Costa Junior (2006) of an Atlantic forest fragment known as ‘Mata das Caldeiras’, with 38.56 ha, located in Catende, PE. The measures used were the total tree height, diameter of breast height (DBH) and basal area of 766 trees with circumference at breast height (CBH) greater than or equal to 15 cm. The proposed methodology of multivariate vertical stratification resulting from the combination of principal component analysis, cluster and discriminant analysis was compared to the methods of Vega (1966), IUFRO, Longhi (1980), Sousa and Leite (1993), Guedes-Bruni et al. (2006) ,IUFRO-Lorey and Sanquetta (1995 ). The efficiency of the method used was considered when there was a decrease in the coefficient of variation (CV) within the stratum after the use of discriminant analysis. It was observed significant gains in accuracy of CV for the multivariate method proposed in relation to the others when the discriminant analysis was applied. However, the difficulties of vertical stratification are clear because the gains in CV vary widely depending on the methodology used. The new methodology can be used for vertical stratification of natural forests and presents as main advantage the removal of the researcher’s subjectivity.
Neste trabalho objetivou-se propor uma nova metodologia de estratificação vertical de florestas naturais, baseada na altura total da árvore, a partir de aplicação de técnicas multivariadas. A metodologia foi comparada com outros métodos usados em estratificação florestal. Foram utilizados dados estruturais de um fragmento de Floresta Atlântica, obtidos por Costa Júnior (2006), conhecido localmente por Mata das Caldeiras, com área aproximada de 38,56 ha, localizado no município de Catende, PE, a aproximadamente 11 km da sede municipal, nas coordenadas 8°40’ S e 35°35’ W, a uma altitude de 327 m. Foram utilizadas medidas de altura, diâmetro e área basimétrica de 766 indivíduos arbóreos com circunferência a altura do peito (CAP), a altura de 1,30 m do solo, maior ou igual a 15 cm. Foi proposto um método multivariado de estratificação vertical a partir da utilização conjunta das análises de componentes principais, de agrupamento e discriminante, bem como aplicados os métodos de Vega (1966), da IUFRO, de Longhi (1980), de Souza e Leite (1993), de Guedes-Bruni et al. (2006) ,da IUFRO-LOREY e de Sanquetta (1995). A eficiência do método aplicado foi considerada quando houve diminuição do CV dentro do estrato após a análise discriminante. Observou-se maiores ganhos de precisão em termos de coeficiente de variação para o método multivariado proposto em relação aos demais quando da aplicação da análise discriminante. No entanto, as dificuldades de estratificação vertical são claras já que os ganhos em coeficiente de variação variam muito conforme metodologia utilizada. O método multivariado proposto pode ser utilizado para estratificação vertical de florestas naturais e apresenta como vantagem principal a retirada de subjetividade do pesquisador.
Brasil, Luciana Medeiros da Silva. "Sarapatel caprino: valor nutricional e qualidade microbiológica." Universidade Federal da Paraíba, 2014. http://tede.biblioteca.ufpb.br:8080/handle/tede/4075.
Full textCoordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPES
Goat sarapatel is produced using goat blood and viscera. It represents an economical alternative to the use of the by goat slaughter. This product, typical of northeastern Brazil, presents no standardization in its formulation, which can lead to a wide variation in its composition and nutritional quality. The objective of this research was, therefore, to evaluate the microbiological and nutritional of the quality goat sarapatel which is commercialized at different places points and under different storage conditions in the city of João Pessoa, Paraíba, Brazil. For this experiment work, a total of 48 samples of goat sarapatel were analyzed; there were obtained from a variety of places, such as street fairs, butcher shops and supermarkets. As a result of being acquired from different places the condition of each samples varied: some were frozen, others were refrigerated and there were a few under room temperature. The physico-chemical quality of goat sarapatel presented an remarkable nutritional value (each 100g of goat sarapatel presented, on average, 72g of moisture, 2g of ash, 18g of protein, 9g of fat and 2g of carbs).Its fatty acid profile showed a high amount of unsaturated fatty acids, especially oleic, linoleic and linolenic acids. In the amino acid profile analysis, 18 amino acids were identified, especially the amino acids lysine, histidine, leucine, phenylalanine and valine. There amino acids are considered essential, which makes the sarapatel a protein source with a high nutritional value. The samples also presented a high level of cholesterol, with an average concentration of 282mg/100g. The results of the microbiological analyses of the samples revealed the absence of Salmonella spp. and L monocytogenes. However, high levels of total coliform, thermotolerant and Clostridium sulphite reducer were found, ranging from 1,5x104 to >1,1x105 NMP/g; from 2,4x104 to >1,1x105 NMP/g; and from 3,2x103 to 9,8x105 UFC/g, respectively. Positive Staphylococcus coagulase was present in 31.25% of the samples, with level counts ranging from 4,3x104 to 1,2x105 UFC/g. These results show that the samples of goat sarapatel sold in the city of João Pessoa/PB present acceptable nutritional value; however, their microbiological quality is unsatisfactory, which may represent a risk to consumer health. The involvement of regulatory agencies in the production process is therefore necessary, in order to promote health and safety measures and make sure this products is safe for consumption.
O sarapatel caprino é produzido a partir de vísceras e sangue, representando uma alternativa econômica para aproveitamento dos subprodutos do abate caprino. Este produto, típico do Nordeste do Brasil, não apresenta padronização em sua formulação, o que pode gerar grande variação na sua composição e qualidade nutricional. Objetivou-se, assim, avaliar a qualidade microbiológica e nutricional do sarapatel caprino comercializados em diferentes pontos de vendas e sob diferentes condições de armazenamento, na cidade de João Pessoa, Paraíba, Brasil. Para tanto foram analisadas 48 amostras de sarapatel caprino provenientes de feiras-livre, açougues e supermercados, mantidas sob refrigeração, congelamento e temperatura ambiente. A qualidade físico-química do sarapatel caprino mostrou destacado valor nutricional (cada 100g do sarapatel caprino apresentou, em média, 72 g de umidade, 2 g de cinzas, 18 g de proteínas, 9 g de lipídeos e 2 g de carboidratos), além de perfil de ácidos graxos rico em ácidos graxos insaturados, principalmente oléico, linoléico e linolênico. Na análise de perfil de aminoácidos foram identificados 18 aminoácidos, destacando-se lisina, histidina, leucina, fenilalanina e valina, considerados essenciais, sendo, portanto uma fonte proteica de alto valor biológico. As amostras apresentaram ainda, teor de colesterol com concentração média de 282 mg/100 g. Os resultados das análises microbiológicas revelaram ausência de Salmonella spp. e L. monocytogenes nas amostras avaliadas. No entanto foram encontrados elevados valores de Coliformes totais, termotolerantes e Clostridium sulfito redutor, variando entre 1,5x104 a >1,1x105 NMP/g; 2,4x104 a >1,1x105 NMP/g e 3,2x103 a 9,8x105 UFC/g, respectivamente; além da ocorrência de Staphylococcus coagulase positiva em 31,25 % das amostras analisadas, com contagens variando entre 4,3x104 e 1,2x105 UFC/g. Estes resultados mostram que as amostras de sarapatel caprino, comercializadas na cidade de João pessoa/PB, apresentam bom percentual proteico e perfil de ácidos graxos e aminoácidos, embora com elevado teor de colesterol e qualidade microbiológica insatisfatória, podendo representar risco à saúde do consumidor, necessitando de envolvimento de órgãos fiscalizadores com ações que promovam segurança na cadeia de processamento deste produto o caprino derivado.
Coelho, Guilherme Palermo 1980. "Geração, seleção e combinação de componentes para ensembles de redes neurais aplicadas a problemas de classificação." [s.n.], 2006. http://repositorio.unicamp.br/jspui/handle/REPOSIP/261408.
Full textDissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Eletrica e Computação
Made available in DSpace on 2018-08-11T19:03:12Z (GMT). No. of bitstreams: 1 Coelho_GuilhermePalermo_M.pdf: 2968179 bytes, checksum: bbea7c9c565907f86eee09155421bfa3 (MD5) Previous issue date: 2006
Resumo: O uso da abordagem ensembles tem sido bastante explorado na última década, por se tratar de uma técnica simples e capaz de aumentar a capacidade de generalização de soluções baseadas em aprendizado de máquina. No entanto, para que um ensemble seja capaz de promover melhorias de desempenho, os seus componentes devem apresentar bons desempenhos individuais e, ao mesmo tempo, devem ter comportamentos diversos entre si. Neste trabalho, é proposta uma metodologia de criação de ensembles para problemas de classificação, onde os componentes são redes neurais artificiais do tipo perceptron multicamadas. Para que fossem gerados bons candidatos a comporem o ensemble, atendendo a critérios de desempenho e de diversidade, foi aplicada uma meta-heurística populacional imuno-inspirada, denominada opt-aiNet, a qual é caracterizada por definir automaticamente o número de indivíduos na população a cada iteração, promover diversidade e preservar ótimos locais ao longo da busca. Na etapa de seleção dos componentes que efetivamente irão compor o ensemble, foram utilizadas seis técnicas distintas e, para combinação dos componentes selecionados, foram adotadas cinco estratégias. A abordagem proposta foi aplicada a quatro problemas de classificação de padrões e os resultados obtidos indicam a validade da metodologia de criação de ensembles. Além disso, foi verificada uma dependência entre o melhor par de técnicas de seleção e combinação e a população de indivíduos candidatos a comporem o ensemble, assim como foi feita uma análise de confiabilidade dos resultados de classificação
Abstract: In the last decade, the ensemble approach has been widely explored, once it is a simple technique capable of increasing the generalization capability of machine learning based solutions. However, an ensemble can only promote performance enhancement if its components present good individual performance and, at the same time, diverse behavior among each other. This work proposes a methodology to synthesize ensembles for classification problems, where the components of the ensembles are multi-layer perceptrons. To generate good candidates to compose the ensemble, meeting the performance and diversity requirements, it was applied a populational and immune-inspired metaheuristic, named opt-aiNet, which is characterized as being capable of automatically determining the number of individuals in the population at each iteration, promoting diversity and preserving local optima through the search. In the component selection phase, six distinct techniques were applied and, to combine these selected components, five strategies were adopted. The proposed approach was applied to four pattern classification problems and the obtained results indicated the validity of the methodology to synthesize ensembles. It was also verified a dependence of the best pair of selection and combination techniques on the population of candidates to compose the ensemble, and it was made an analysis of the confidence of the classification results
Mestrado
Engenharia de Computação
Mestre em Engenharia Elétrica
Gertrudes, Jadson Castro. "Emprego de técnicas de análise exploratória de dados utilizados em Química Medicinal." Universidade de São Paulo, 2013. http://www.teses.usp.br/teses/disponiveis/100/100131/tde-14112013-124231/.
Full textResearches in Medicinal Chemistry\'s area have focused on the search of methods that accelerate the process of drug discovery. Among several steps related to the process of discovery of bioactive substances there is the analysis of the relationships between chemical structure and biological activity of compounds. In this process, researchers of medicinal chemistry analyze data sets that are characterized by high dimensionality and small number of observations. Within this context, this work presents a computational approach that aims to contribute to the analysis of chemical data and, consequently, the discovery of new drugs for the treatment of chronic diseases. Approaches used in exploratory data analysis, employed in this work, combine techniques of dimensionality reduction and clustering for detecting natural structures that reflect the biological activity of the analyzed compounds. Among several existing techniques for dimensionality reduction, we have focused the Fisher\'s score, principal component analysis and sparse principal component analysis. For the clustering procedure, this study evaluated k-means, fuzzy c-means and enhanced ICA mixture model. In order to perform experiments, we used four data sets, containing information of bioactive substances. Two sets are related to the treatment of diabetes mellitus and metabolic syndrome, the third set is related to cardiovascular disease and the latter set has substances that can be used in cancer treatment. In the experiments, the obtained results suggest the use of dimensionality reduction techniques along with clustering algorithms for the task of clustering chemical data, since from these experiments, it was possible to describe different levels of biological activity of the studied compounds. Therefore, we conclude that the techniques of dimensionality reduction and clustering can be used as guides in the process of discovery and development of new compounds in the field of Medicinal Chemistry
Menezes, Aparecido Junior de. "Preparação e caracterização de sistema bifásico mono-componente (SBM) a partir da reação de oxipropilação de fibras celulósicas e amido." Universidade de São Paulo, 2007. http://www.teses.usp.br/teses/disponiveis/75/75131/tde-11052007-161843/.
Full textChemical modifications were applied to cellulosic materials and starch with the objective to obtain products with an external thermoplastic layer while preserving the inner part of these substrates. The final products should behave as composite materials where the unmodified inner part is the reinforcement agent and the thermoplastic layer the matrix. The modifications were performed by grafting polypropylene oxide short chains to the polysaccharide backbone (cellulose and starch). The grafted polypropylene oxide chains will render a thermoplastic layer around the unmodified polysaccharide portions. The attainment of these materials can excuse the stages of mixture and allow the thermal processing without the necessity of use the second component (matriz), a time that the proper polymeric layer would play this role. The construction of the involving polymeric layer was conducted by reacting pre-activated cellulose (or starch) and propylene oxide (PO). The activation step was performed with KOH (or DABCO) treatment and the grafting reaction was carried through in heterogeneous system. The materials obtained following these treatments were characterized by different techniques (FTIR, X-Ray, MEV, TG, DSC, Contact Angle and Mechanical Analyses). The results had demonstrated that it is possible to produce materials with strengthened thermoplastic characteristics through the reaction in an only stage, without the necessity of laborious synthetic procedures.
Lopes, Fernando Bezerra. "Índice de sustentabilidade do perímetro irrigado Baixo Acaraú-Ceará." reponame:Repositório Institucional da UFC, 2008. http://www.repositorio.ufc.br/handle/riufc/18597.
Full textSubmitted by Elineudson Ribeiro (elineudsonr@gmail.com) on 2016-06-21T19:03:01Z No. of bitstreams: 1 2008_dis_fblopes.pdf: 8853642 bytes, checksum: 6b9ca35602180a0ed03b7181c5db0396 (MD5)
Approved for entry into archive by José Jairo Viana de Sousa (jairo@ufc.br) on 2016-07-21T20:13:53Z (GMT) No. of bitstreams: 1 2008_dis_fblopes.pdf: 8853642 bytes, checksum: 6b9ca35602180a0ed03b7181c5db0396 (MD5)
Made available in DSpace on 2016-07-21T20:13:53Z (GMT). No. of bitstreams: 1 2008_dis_fblopes.pdf: 8853642 bytes, checksum: 6b9ca35602180a0ed03b7181c5db0396 (MD5) Previous issue date: 2008
The aimed of this work was an integrated sustainability analysis of the Irrigated Perimeter of Baixo Acaraú (PIBAU) sited in Acaraú basin, Ceará, Brazil. The analysis was labeled by an agro ecological sustainability index (ASI). The approach was based on 22 cross-over form applied to small producers that live in the PIBAU. In the irrigated areas selected to perform the interviews, it was developed the irrigation system evaluation. Factory Analysis/Principal Components Analysis (FA/PCA) was employed to select the factors sustainability indicators of the irrigated perimeter as well as to define the agro ecological sustainability index. Results showed that 64% of the producers had a power education and 77% of them had no experience with irrigation agriculture before. Also, it was identified that only 18% of irrigation systems presented an excellent CUD, while 28% of them were classified with a bad performance. According to the sensitive test effectuated by FA/PCA, only 12 of 27 variables that composed the initial matrix were significant to explain the total variance of data set. The 12 variables selected by the model were grouped in five factors explaining 79.14% of the total variance. The factors loading indicated that the PIBAU sustainability is, principally, related to the lack of acknowledgment as well as the used of suitable management of agricultural practices. The sustainability index of each productive units ranges from 0.283 to 0.916 and the average was 0.538. Only 9.0% of the pooled productivity were classified as sustainable, while 18.2% of them presented a kind of sustainability. Almost the half of producers (45.5%) showed a threatened sustainability and the others (27.3%) were in unsustainable condition. Also, it was identified that some units with a good irrigation system performance, without of salinization risk presented a low sustainability index (0.371). This is explained by the fact the index express an integration of different variables. Even though, no risk of salinization was identified, this work registered an addition high of significance of salt in the irrigated area when compared to undisturbed one.
Este trabalho teve como objetivo realizar uma análise integrada da sustentabilidade do Perímetro Irrigado Baixo Acaraú (PIBAU), localizado na Bacia do Acaraú a norte do Estado do Ceará, possibilitando o desenvolvimento de um índice de sustentabilidade agro-ambiental. Para isso, aplicou-se uma amostragem exploratória, adotando um modelo de amostragem não probabilístico, obtendo uma população amostral de 22 produtores agrícolas beneficiados pelo respectivo projeto de irrigação e aplicando-se questionários do tipo “cross-over”. Nos lotes selecionados para a aplicação dos questionários, foi realizada uma avaliação dos sistemas de irrigação. Os fatores determinantes da sustentabilidade do Perímetro, bem como o índice de sustentabilidade foram identificados pelo emprego da técnica de Análise Fatorial/Análise da Componente Principal (AF/ACP). A pesquisa identificou que mais da metade dos produtores agrícolas apresentam baixo nível educacional (64%) e que 77% dos irrigantes não tinham experiência com a prática da agricultura irrigada antes de ser proprietário de um lote no Perímetro. Apenas 18% dos sistemas de irrigação localizada do Perímetro apresentam Coeficiente de Uniformidade de Distribuição (CUD) classificado como excelente e 28% apresentam CUD classificado como ruim. Pelo teste de sensibilidade, efetuado utilizando-se o modelo da AF/ACP, identificou-se que, das 27 variáveis que compunham a matriz inicial, apenas 12 delas apresentaram alguma significância na explicação da variância total dos dados. O emprego do modelo promoveu a redução de 12 características dos fatores que influenciam a sustentabilidade do Perímetro para cinco componentes, que explicam 79,14% da variância total. Os pesos atribuídos a cada fator indicaram que a sustentabilidade do Perímetro Baixo Acaraú está, principalmente, relacionada à falta de conhecimento e do uso de técnicas corretas de produção agrícola. Os índices de sustentabilidade obtidos para cada unidade produtiva variaram no intervalo de 0,283 a 0,916. A média global de sustentabilidade dos lotes foi de 0,538 representando uma condição de sustentabilidade comprometida. Apenas 9,0% das unidades produtivas estudadas encontram-se numa situação de sustentabilidade equilibrada. Outros 18,2% dos produtores ainda são considerados sustentáveis, mas em condição de ameaça, que pode advir de qualquer um dos fatores contabilizados no índice. Quase metade dos colonos (45,5%) pesquisados registrou uma sustentabilidade que já se apresenta de alguma forma comprometida e os demais (27,3%) estão em condições de insustentabilidade. A unidade produtiva em estudo não apresenta solos com problema de salinização, porém com exceção da camada inferior (0,90 a 1,20 m), para as demais camadas estudadas (0 a 0,30, 0,30 a 0,60 e 0,60 a 0,90 m) a adição de sais ao solo pelo manejo inadequado da irrigação foi altamente significativa. Apesar do solo não apresentar risco de salinização e o sistema de irrigação funcionar com uma uniformidade de distribuirão classificado como bom, a unidade em estudo apresenta índice de sustentabilidade de 0,371, devido o índice ser formado por um conjunto de variáveis.
Santos, Michael Shuenck dos. "X-ARM: um modelo de representa??o de artefatos de software." Universidade Federal do Rio Grande do Norte, 2006. http://repositorio.ufrn.br:8080/jspui/handle/123456789/18056.
Full textA great challenge of the Component Based Development is the creation of mechanisms to facilitate the finding of reusable assets that fulfill the requirements of a particular system under development. In this sense, some component repositories have been proposed in order to answer such a need. However, repositories need to represent the asset characteristics that can be taken into account by the consumers when choosing the more adequate assets for their needs. In such a context, the literature presents some models proposed to describe the asset characteristics, such as identification, classification, non-functional requirements, usage and deployment information and component interfaces. Nevertheless, the set of characteristics represented by those models is insufficient to describe information used before, during and after the asset acquisition. This information refers to negotiation, certification, change history, adopted development process, events, exceptions and so on. In order to overcome this gap, this work proposes an XML-based model to represent several characteristics, of different asset types, that may be employed in the component-based development. Besides representing metadata used by consumers, useful for asset discovering, acquisition and usage, this model, called X-ARM, also focus on helping asset developers activities. Since the proposed model represents an expressive amount of information, this work also presents a tool called X-Packager, developed with the goal of helping asset description with X-ARM
O Desenvolvimento Baseado em Componentes tem como grande desafio a cria??o de mecanismos que facilitem a identifica??o de assets reus?veis que satisfa?am os requisitos de sistemas particulares sob desenvolvimento. Neste sentido, reposit?rios de componentes t?m sido propostos como meios para se atender esta necessidade. Por?m, reposit?rios precisam representar as caracter?sticas de assets que possam ser levadas em considera??o pelos consumidores quando da escolha dos assets mais adequados ?s suas necessidades. Neste contexto, a literatura apresenta alguns modelos que foram propostos com a finalidade de descrever as caracter?sticas de assets, tais como identifica??o, classifica??o, requisitos n?o funcionais, informa??es de implanta??o e uso, arquivos que comp?em os assets, e interfaces de componentes. No entanto, o conjunto de caracter?sticas representadas por estes modelos ? insuficiente para descrever diversas informa??es usadas antes, durante e depois da aquisi??o dos assets, dentre as quais pode-se destacar informa??es de negocia??o e certifica??o, hist?rico de mudan?as, processo de desenvolvimento usado, eventos, exce??es. De forma a solucionar tais defici?ncias, este trabalho apresenta um modelo baseado em XML para a representa??o de diversas caracter?sticas, de diversos tipos de assets, que possam ser empregadas no desenvolvimento baseado em componentes. O modelo proposto, denominado X-ARM, fornece informa??es usadas n?o apenas pelos consumidores na identifica??o, aquisi??o e uso de assets, mas tamb?m para apoiar as atividades dos desenvolvedores de assets. Dado que o modelo proposto representa uma expressiva quantidade de informa??es, este trabalho tamb?m apresenta uma ferramenta chamada X-Packager, desenvolvida com o objetivo de auxiliar a descri??o de assets com X-ARM
Montesco, Carlos Alberto Estombelo. "Método de análise de componentes dependentes para o processamento, caracterização e extração de componentes de sinais biomédicos." Universidade de São Paulo, 2007. http://www.teses.usp.br/teses/disponiveis/59/59135/tde-25092008-165152/.
Full textAn important goal in biomedical signal processing is the extraction of information based on a set of physiological measurements made along time. Generally, biomedical signals are electromagnetic measurements. Those measurements (usually made with multichannel equipment) are registered using spatially distributed sensors around some areas of the human body, originating a set of time and/or space correlated data. The signals of interest are rarely registered alone, being usually observed as a mixture of other spurious, noisy signals (sometimes superimposed) and environmental or physiological artifacts. More over, the signal-to-noise ratio is generally low. In many applications, a big number of sensors are available, but just a few sources are of interest and the remainder can be considered noise. For such kind of applications, it is necessary to develop trustful, robust and effective learning algorithms that allow the extraction of only a few sources potentially of interest and that hold useful information. The strategy used here for extraction of sources is applied in three important problems in biomedical signal processing: (1) detection of the fetal magnetocardiogram signal (fMCG); (2) detection of the electrical activity of the stomach in magnetogastrograms (MGG); and (3) detection of active regions of the brain in experiments in functional Magnetic Resonance Imaging (fMRI). The results, within the three cases of study, showed that the DCA method used as strategy is effective and computationally efficient on extraction of desired signals.
Dias, Raphael Antonio Prado. "Diagnóstico e redução da influência da multicolinearidade na estimação de efeitos genéticos aditivos e não-aditivos em uma população de bovinos compostos (Bos taurus x Bos indicus)." Universidade de São Paulo, 2009. http://www.teses.usp.br/teses/disponiveis/11/11134/tde-11022009-084629/.
Full textThe genetic additive and heterozygosity effects are important in the genetic evaluation of multibreed populations. When there is strong linear relation between the explanatory variables, the regression coefficients have large standard errors and are sensitive to changes in the data set and to the addition or removal of explanatory variables in the model. The alternative used to try to reduce this problem was to apply the method of ridge regression - RC, which could allow for the estimation of more stable coefficients of direct and maternal breed additive effects of genetic origin and heterozygosity in relation to those obtained by the method of least squares QM . The objective is to analyze the data of birth weight - PESNAS, weaning - PESDES, the scrotal perimeter 390 days - CE and scoring for the muscularity 390 days - MUSC of cattle compounds Montana Tropical r, with different racial compositions NABCs, obtained in several Brazilian farms on of animals born from 1994 to 2008. The model included additive and non-additive effects. The degrees of multicollinearity were obtained through the value of the variance inflation factor - V IF, the index conditions - IC and by proportional decomposition of Variance. The ridge parameters were obtained from the multiplication of a constant to the ratio of the VIF from each covariate and the highest VIF. For each explanatory variable, the ridge trace was used to verify that the estimated coefficients were stabilized using the ridge parameter. Two different methods were applied: i) the effects were estimated by least squares; ii) the effects were estimated by ridge regression. For each response variable the number of colinearities was identified, their degrees and the variables involved in each. The covariates used in the model for birth weight participated in a strong colinearity and four other weak colinearities; for weaning weight and muscle score for 390 days, there were two strong relations of dependency and three almost weak, while for the perimeter scrotal 390 days it was observed three strong and three weak colinearities. The ridge regression coefficients method was considered better than that of least squares for all factors. The V IFs average for PESNAS, PESDES, CE and MUSC reduced from 15.5, 16, 17.5 and 23.9 to 5.8, 5.3, 5.7 and 5.1 respectively, after using the RC. The standard errors of the estimators decreased providing estimates more stable than those obtained by least squares. Only for A covariate on the response variable weight at birth the solutions obtained by QM and RC differ in direction, where the other ones differed only in magnitude.
Strid, Magnus, and Sturmhoefel Johanna Hagman. "Skapa värde ur misstag : Genom DASIAS föreslås förbättringar i processen för hantering av avvikelser och kassationer." Thesis, Uppsala universitet, Institutionen för samhällsbyggnad och industriell teknik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-445383.
Full textThis deductive case study has been carried out at the company e-Component Sweden AB, which manufactures steel- and sheet metal details, to customer specifications. The company mainly produces details for the market-leading tiltrotator (the excavators wrist) from engcon. The purpose of the study was to examine the process for handling defects and deviations from the main production. The overall aim was to, through the relatively new possibility- and improvement model DASIAS, study an opportunity for improvement with regard to quality by identifying a gap between the current procedure and a desired new procedure. Thereafter, appropriate improvements including a plan for implementing the improvements has been proposed. The study has applied the tools and analyzing methods as prescribed by DASIAS. Data has been collected through observations, interviews and document collection. The study's result suggests that there is an opportunity for improvement and have identified the resources method, measurements, materials, machine, mission and management as reasons for the improvement opportunity. Further, the study suggests that through an optimized process for handling defects and deviations – following adjusted routines and working methods and creating conditions for implementing process and quality management, there is an opportunity to prevent and through continuous improvements minimize defects and deviations in the main production. Previous studies, the theoretical frame of reference and the results of this study suggest that the concrete interdisciplinary measures proposed would have a positive impact on the company’s overall quality. The analysis shows that the desired new situation would bring the company closer to customer- and stakeholder requirements.
Pedra, George Ulguim, and George Ulguim Pedra. "Relação dos principais padrões de oscilação do vento na baixa atmosfera e a temperatura mínima mensal no Rio Grande do Sul." Universidade Federal de Pelotas, 2011. http://repositorio.ufpel.edu.br/handle/ri/2205.
Full textRio Grande do Sul (RS) has a large annual temperature range is characterized by hot summers and cold winters, being strongly influenced by weather systems in middle and high latitudes. Many studies suggest climate change on Earth, particularly to the anomalous increase in temperature in recent decades. The large thermal variations interfere directly in agricultural production, trade and tourism, affecting the region's economy. The main objective of this research was to identify the main patterns of wind speed at 850hPa layer. This layer is slightly above the surface outside of each boundary, and thus with little influence of urban effects. Knowing the correlation of patterns of wind speed with variations of monthly minimum temperatures throughout the year in RS, identify and compare the adjustment functions of temporal trends linear and nonlinear, and list the possible influence of large swings over the Pacific Ocean these variations regional, especially during extreme. To study the atmospheric oscillations were used in data grid point wind speed at 850hPa over South America, which were applied the technique of spectral decomposition defined principal components. We used monthly minimum temperature data from 24 stations well distributed spatially in RS. The results showed that the patterns of oscillations Main circulation in the lower atmosphere over South America are strongly associated with variations of wind speed in regions of the Polar Jet, Subtropical Jet and the trade winds in the Equatorial Pacific. Core Standards of the wind speed did not correlate significantly with the minimum temperatures in March, June, July and September. During other months the correlation coefficients were significant, especially the months of January, April, May and October. The northern state of RS presented highlight this relationship, with the months of April and May the most significant. The trend of monthly minimum temperatures for the meteorological station of Irai shown for all months of the year, the biggest adjustment function non-linear time in comparison with the linear. The index of the Pacific Decadal Oscillation function showed nonlinear fitting, revealing very similar function to the main circulation patterns of the wind at 850hPa and adjustments of nonlinear functions of minimum temperatures in Iraí (RS). Faced with the obvious relations between the oscillations of the wind circulation at 850hPa with the changes in the surface equatorial Pacific / North, we can expect that the trends in minimum temperatures in RS for these next two decades suffer on average more negative than oscillations positive, especially during summer and autumn, although it indicates increased temperature in early spring.
O Rio Grande do Sul (RS) apresenta grande amplitude térmica anual caracterizada por verões quentes e invernos frios, sendo influenciado fortemente por sistemas atmosféricos de latitudes médias e elevadas. Muitas pesquisas apontam alterações climáticas na Terra, especialmente no sentido de crescimento anômalo da temperatura nestas últimas décadas. As grandes variações térmicas interferem diretamente na produção agrícola, no comércio e no turismo, afetando a economia da região. Os objetivos principais desta pesquisa foram: Identificar os principais padrões de velocidade de vento na camada de 850hPa. Esta camada está ligeiramente acima da superfície, fora da cada limite e, portanto, com pequena influência dos efeitos urbanos; conhecer a correlação destes padrões de velocidade do vento com variações das temperaturas mínimas mensais ao longo do ano no RS, identificar e comparar as funções de ajuste de tendências temporais lineares e não lineares e relacionar as possíveis influências das grandes oscilações oceânicas do Pacífico sobre estas variações regionais, especialmente nos períodos extremos. Para estudar as oscilações atmosféricas foram usados dados em ponto de grade da velocidade do vento em 850hPa sobre a América do Sul, aos quais foram aplicadas a técnica de decomposição espectral definida como Componentes Principais. Foram utilizados dados de temperatura mínima mensal de 24 estações bem distribuídas espacialmente no RS. Os principais resultados mostraram que os Padrões de Oscilações Principais da circulação na baixa atmosfera sobre a América do Sul estão fortemente associados às variações de velocidade do vento nas regiões do Jato Polar, Jato Subtropical e os ventos Alísios no Pacífico Equatorial. Os Padrões Principais da velocidade do vento não apresentaram correlações significativas com as temperaturas mínimas nos meses de março, junho, julho e setembro. Nos demais meses os coeficientes de correlação foram significativos, especialmente os meses de janeiro, abril, maio e outubro. A região norte do Estado do RS apresentou destaque nesta relação, sendo os meses de abril e maio os mais significativos. A tendência temporal das temperaturas mínimas mensais para a estação meteorológica de Irai mostrou, para todos os meses do ano, maior ajuste para a função temporal não linear na comparação com a linear. O índice de Oscilação Decadal do Pacífico apresentou função de ajuste não linear, revelando ser bastante semelhante aos principais padrões de circulação do vento em 850hPa e aos ajustes das funções não lineares das temperaturas mínimas em Iraí (RS). Frente às relações evidentes entre as oscilações da circulação do vento em 850hPa com as oscilações na superfície do Oceano Pacífico Equatorial/Norte, pode-se esperar que as tendências das temperaturas mínimas no RS para estas próximas duas décadas sofram, em média, mais oscilações negativas do que positivas, principalmente nos meses de verão e outono, apesar de indicar aumento de temperatura no começo de primavera.
Alberi, Matteo. "La PCA per la riduzione dei dati di SPHERE IFS." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2014. http://amslaurea.unibo.it/6563/.
Full textSousa, Patrícia Ferreira Cunha [UNESP]. "Avaliação de laranjeiras doces quanto à qualidade de frutos, períodos de maturação e resistência a Guignardia citricarpa." Universidade Estadual Paulista (UNESP), 2009. http://hdl.handle.net/11449/102823.
Full textCoordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Apesar de sua importância comercial, o número de variedades de laranjas é muito restrito no Brasil. Os Bancos de Germoplasmas de citros possuem grande número de genótipos de laranjas doces para serem explorados e avaliados quanto aos aspectos botânicos, genéticos e agronômicos, visando elevar a variabilidade genética e as qualidades agronômicas das cultivares. Como parte desse trabalho, avaliou-se 58 genótipos de laranjeiras doces em relação aos caracteres físicos, visando mercado in natura por meio de 9 caracteres físicos (diâmetro, perímetro, altura e peso dos frutos, espessuras da casca, albedo e polpa e número de sementes) e 7 caracteres visando qualidade industrial (acidez total titulável, sólidos solúveis totais, “ratio”, peso dos frutos, rendimento de suco, ácido ascórbico e índice tecnológico= kg sólidos solúveis/40,8kg). A análise multivariada indicou a existência de variabilidade entre os genótipos em relação aos caracteres físicos visando mercado in natura e qualidade industrial. Dois componentes principais, com autovalores > 1, representaram 66,03% da variância total para os caracteres físicos. As variáveis com maior poder discriminatório na primeira componente principal foram: diâmetro, perímetro, peso e altura dos frutos. Os escores desse componente foram designados MI-CP1 (mercado in natura), e os genótipos com os maiores valores foram os mais indicados para o mercado de fruta fresca. Na segunda componente principal, as variáveis mais discriminantes foram espessura do endocarpo e rendimento de suco, cujos escores foram nomeados (S-CP2), caracteres físicos esses ideais para a qualidade industrial. Nos escores dos dois componentes principais (MI-CP1 e S-CP2), o genótipo 22- ‘Lanelate’ foi destaque, seguido por 43-Telde, 39-Rotuna, 44-Torregrossa, 46-Tua Mamede e 17-Grada. Quanto às avaliações visando qualidade industrial...
Although its commercial importance, the number of you cultivate of oranges it is very restricted in Brazil. The Banks of Germoplasmas of citros possess innumerable accesses of oranges candies to be explored and evaluated how much to the botanical, genetic and agronomics aspects, aiming at to raise the genetic variability and the agronomics qualities cultivating of them. As part of that work, was sought to evaluate 58 genotypes of sweet orange trees in relation to the physical characters, seeking market in nature and industry quality, through 9 physical characters (diameter, perimeter, height and weight of the fruits, thickness of the peel, albedo and pulp and number of seeds) and 7 characters seeking industrial quality (acidity total titillate, total soluble solids, ratio , weight of the fruits, juice revenue, ascorbic acid and technological index = kg solid solutes/40,8kg). The analysis multivariate indicated the variability existence among the genotypes in relation to the physical characters and industrial quality. Two main components, with autovalues> 1, they represented 66,03% of the total variance for the physical characters. The variables with larger power discriminate in the first main component were: diameter, perimeter, weight and height of the fruits; we named the scores of that component of MI-CP1 (market in nature), genotypes with the largest values were the most suitable to the market of fresh fruit; in the second main component the variables more discriminate were thickness of the endocarp and juice revenue, it was named (S-CP2), characters physical ideas for the industrial quality. In the scores of the two main components (MI-CP1 and S-CP2), the genotype 22-Lanelate was prominence, followed for 43-Telde, 39-Rotuna, 44- Torregrossa, 46-Tua Mamede and it 17-Grada. How much to the evaluations aiming at industrial quality (INDUST-CP1), had been distinguished: ...(Complete abstract click electronic access below)
Strid, Magnus, and Sturmhoefel Johanna Hagman. "Skapa värde ur misstag : Genom DASIAS föreslås förbättringar i processen för hantering av avvikelser och kassationer." Thesis, Uppsala universitet, Institutionen för samhällsbyggnad och industriell teknik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-449338.
Full textThis deductive case study has been carried out at the company e-Component Sweden AB, which manufactures steel- and sheet metal details, to customer specifications. The company mainly produces details for the market-leading tiltrotator (the excavators wrist) from engcon. The purpose of the study was to examine the process for handling defects and deviations from the main production. The overall aim was to, through the relatively new possibility- and improvement model DASIAS, study an opportunity for improvement with regard to quality by identifying a gap between the current procedure and a desired new procedure. Thereafter, appropriate improvements including a plan for implementing the improvements has been proposed. The study has applied the tools and analyzing methods as prescribed by DASIAS. Data has been collected through observations, interviews and document collection. The study's result suggests that there is an opportunity for improvement and have identified the resources method, measurements, materials, machine, mission and management as reasons for the improvement opportunity. Further, the study suggests that through an optimized process for handling defects and deviations – following adjusted routines and working methods and creating conditions for implementing process and quality management, there is an opportunity to prevent and through continuous improvements minimize defects and deviations in the main production. Previous studies, the theoretical frame of reference and the results of this study suggest that the concrete interdisciplinary measures proposed would have a positive impact on the company’s overall quality. The analysis shows that the desired new situation would bring the company closer to customer- and stakeholder requirements.
Santos, Gilnete Leite dos. "Análise e extração de características de imagens termográficas utilizando componentes principais /." Ilha Solteira : [s.n.], 2010. http://hdl.handle.net/11449/108383.
Full textBanca: Amarildo Tabone Paschoalini
Banca: Renê Pegoraro
Resumo: As técnicas de termografia vêm atualmente ganhando espaço como técnicas de manutenção preditiva, principalmente, por seu caráter não invasivo (ferramenta de não contato) que possibilita o monitoramento do aquecimento de máquinas e equipamentos em operação ou mesmo energizados. A utilização de câmeras termográficas hoje é uma realidade em vários setores industriais para monitoramento e detecção de falhas com base na temperatura. Entretanto, a utilização de câmaras termográficas na manutenção não deve se restringir apenas à avaliação da temperatura, uma vez que as imagens termográficas são sinais que apresentam padrões complexos que podem captar as diferentes características e condição de operação do equipamento. Outras informações além da temperatura poderiam ser observadas para uma avaliação mais consistente do estado de operação do equipamento. Este trabalho discute a utilização da técnica da estatística multivariada, Análise de Componentes Principais (ACP) para o processamento e análise de um conjunto de imagens termográficas. Essa proposta visa à identificação de padrões associados às variações térmicas das imagens, bem como, a interpretação desses dados em termos da sua variabilidade espacial/temporal para aplicação na manutenção preditiva com base na termografia. Num primeiro momento a técnica foi aplicada para a avaliação de um conjunto de dados (imagens térmicas) obtidos a partir da simulação do aquecimento de um dado componente (chave elétrica), cujo objetivo foi testar e verificar a validade da proposta e do programa desenvolvido. Posteriormente a técnica foi aplicada para o acompanhamento e avaliação do aquecimento de componentes de um modelo simplificado de um painel de telefonia, formado por blocos de alumínio fixados em uma placa de acrílico. A análise no modo espacial e no modo temporal do conjunto de ... (Resumo completo, clicar acesso eletrônico abaixo)
Abstract: Thermography techniques are currently gaining ground as predictive maintenance techniques, mainly due to its non-invasive character (non-contact tool) that allows the monitoring of heating condition of machines and equipment also in operation and even energized. The use of thermographic cameras is now a reality in many industrial and electrical sectors for monitoring and fault detection based on temperature. However, the use of thermal imagers in the maintenance should not be restricted to only the evaluation of temperature, since the thermographic images are signs that show complex patterns and they can capture the different characteristics of the actual condition of the monitored equipment. Information other than temperature could be observed for a more consistent evaluation of its state of operation. This paper discusses the propose of use of the multivariate analysis technique, Principal Component Analysis (PCA) for the processing and analysis of a series of thermographic images in order to identify patterns associated with temperature variations of the images, as well as, the interpretation of these data in terms of their spatial/temporal variability. Initially the technique was used to the analysis of data (thermal images) obtained from the simulation of heating conditions of a component (electric switch) aiming at to test and verify the validity of the proposal and program development. Later the technique was applied to the monitoring and evaluation of the heating condition of components of a simplified model of a telephone panel, formed by aluminum blocks fixed in a plate of acrylic. The analysis in the spatial and temporal mode of the set of thermograms obtained for different heating conditions of the blocks, it showed that it is possible to verify and establish correlations between the Principal Components and the thermal profile of the system
Mestre
Avelar, André Gnecco. "Análise de componentes principais na dinâmica da volatilidade implícita e sua correlação com o ativo objeto." Universidade de São Paulo, 2009. http://www.teses.usp.br/teses/disponiveis/3/3139/tde-02092009-160154/.
Full textVolatility is the only unobserved variable in the standard option pricing formulas and hence implied volatility is a concept widely adopted by the financial market, meaning the volatility which would make the formula yield the options real market price. Therefore, understanding how the implied volatility of the options on dollar traded at BM&F, the subject of our study, vary over time is important for risk analysis over dollar option books and for pricing of exotic or illiquid derivatives Our works proposal is to verify if the observations made by the technical literature over several markets could also be applied to the options on dollar traded at BM&F: implied volatilities do vary over time and there is a relation between this variation and the variation of the underlying asset price. In order to fulfill these goals, we will apply principal component analysis in our study. This methodology will help us analyze the data by reducing the number of variables that represent the implied volatility process into a few orthogonal variables.
Casagrande, Marcelo Henrique. "Comparação de métodos de estimação para problemas com colinearidade e/ou alta dimensionalidade (p > n)." Universidade Federal de São Carlos, 2016. https://repositorio.ufscar.br/handle/ufscar/7954.
Full textApproved for entry into archive by Marina Freitas (marinapf@ufscar.br) on 2016-10-20T13:58:41Z (GMT) No. of bitstreams: 1 DissMHC.pdf: 1077783 bytes, checksum: c81f777131e6de8fb219b8c34c4337df (MD5)
Approved for entry into archive by Marina Freitas (marinapf@ufscar.br) on 2016-10-20T13:58:47Z (GMT) No. of bitstreams: 1 DissMHC.pdf: 1077783 bytes, checksum: c81f777131e6de8fb219b8c34c4337df (MD5)
Made available in DSpace on 2016-10-20T13:58:52Z (GMT). No. of bitstreams: 1 DissMHC.pdf: 1077783 bytes, checksum: c81f777131e6de8fb219b8c34c4337df (MD5) Previous issue date: 2016-04-29
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
This paper presents a comparative study of the predictive power of four suitable regression methods for situations in which data, arranged in the planning matrix, are very poorly multicolinearity and / or high dimensionality, wherein the number of covariates is greater the number of observations. In this study, the methods discussed are: principal component regression, partial least squares regression, ridge regression and LASSO. The work includes simulations, wherein the predictive power of each of the techniques is evaluated for di erent scenarios de ned by the number of covariates, sample size and quantity and intensity ratios (e ects) signi cant, highlighting the main di erences between the methods and allowing for the creating a guide for the user to choose which method to use based on some prior knowledge that it may have. An application on real data (not simulated) is also addressed.
Este trabalho apresenta um estudo comparativo do poder de predi c~ao de quatro m etodos de regress~ao adequados para situa c~oes nas quais os dados, dispostos na matriz de planejamento, apresentam s erios problemas de multicolinearidade e/ou de alta dimensionalidade, em que o n umero de covari aveis e maior do que o n umero de observa c~oes. No presente trabalho, os m etodos abordados s~ao: regress~ao por componentes principais, regress~ao por m nimos quadrados parciais, regress~ao ridge e LASSO. O trabalho engloba simula c~oes, em que o poder preditivo de cada uma das t ecnicas e avaliado para diferentes cen arios de nidos por n umero de covari aveis, tamanho de amostra e quantidade e intensidade de coe cientes (efeitos) signi cativos, destacando as principais diferen cas entre os m etodos e possibilitando a cria c~ao de um guia para que o usu ario possa escolher qual metodologia usar com base em algum conhecimento pr evio que o mesmo possa ter. Uma aplica c~ao em dados reais (n~ao simulados) tamb em e abordada
Conserva, Filho Madiel de Souza. "Local livelock analysis of component-based models." PROGRAMA DE P?S-GRADUA??O EM SISTEMAS E COMPUTA??O, 2016. https://repositorio.ufrn.br/jspui/handle/123456789/22209.
Full textApproved for entry into archive by Arlan Eloi Leite Silva (eloihistoriador@yahoo.com.br) on 2017-03-10T21:13:38Z (GMT) No. of bitstreams: 1 MadielDeSouzaConservaFilho_TESE.pdf: 1314650 bytes, checksum: ea38672191d7c35f5274cb1360bcfef1 (MD5)
Made available in DSpace on 2017-03-10T21:13:38Z (GMT). No. of bitstreams: 1 MadielDeSouzaConservaFilho_TESE.pdf: 1314650 bytes, checksum: ea38672191d7c35f5274cb1360bcfef1 (MD5) Previous issue date: 2016-08-12
O uso crescente de sistemas complexos exige cada vez mais um maior investimento de recursos no desenvolvimento de software para garantir a confiabilidade dos mesmos. Para lidar com esta complexidade, abordagens composicionais podem ser utilizadas no desenvolvimento de sistemas de software, possibilitando a integra??o e a reutiliza??o de componentes existentes. Entretanto, a fim de garantir o sucesso desta abordagem, ? essencial confiar no comportamento dos componentes e, al?m disso, nos sistemas que s?o desenvolvidos utilizando essa estrat?gia, uma vez que falhas podem ser introduzidas se a composi??o n?o assegurar propriedades importantes. Problemas podem surgir quando dois ou mais componentes s?o integrados pela primeira vez. Esta situa??o ? ainda mais relevante quando um grupo de componentes trabalha em conjunto a fim de executar determinadas tarefas, especialmente em aplica??es cr?ticas, onde podem surgir problemas cl?ssicos, como livelock. Esta tese de doutorado apresenta uma estrat?gia local para garantir aus?ncia de livelock, por constru??o, em sistemas s?ncronos modelados com a nota??o padr?o de CSP. A nossa t?cnica ? baseada na an?lise local das m?nimas sequ?ncias que levam o processo CSP ao seu estado inicial. O uso de t?cnicas locais evita a explos?o do espa?o de estados gerado pela integra??o dos componentes. A verifica??o destas condi??es locais utilizam metadados que permitem armazenar resultados parciais das verifica??es, reduzindo o esfor?o durante a an?lise. A abordagem proposta tamb?m pode ser aplicada para verificar aus?ncia de livelock em modelos que realizam comunica??es ass?ncronas. Neste caso, analisamos o modelo de componentes BR IC, cujo comportamento dos componentes ? representado por um processo CSP. A fim de realizar esta verifica??o, consideramos duas vers?es para BR IC: BR IC , o qual realiza composi??es ass?ncronas atrav?s de buffers finitos, e BR IC? no qual a assincronicidade ? realizada atrav?s de buffers infinitos. Estas duas abordagens foram analisadas porque a possibilidade de introduzir livelock em sistemas ass?ncronos depende diretamente da finitude do buffer. As t?cnicas propostas para garantir aus?ncia de livelock em CSP e BR IC foram avaliadas atrav?s de tr?s estudos de caso: o escalonador de Milner e duas varia??es do jantar dos fil?sofos. Uma vers?o apresenta um sistema livre de livelock, e a outra apresenta um sistema com livelock. Neste estudo, avaliamos a nossa abordagem em compara??o com outras duas t?cnicas para verifica??o de aus?ncia de livelock, a an?lise global tradicional do FDR e a an?lise est?tica de livelock do SLAP. Este estudo comparativo demonstra que a nossa estrat?gia pode ser aplicada como uma alternativa para a verifica??o de aus?ncia de livelock em grandes sistemas.
The use of increasingly complex applications is demanding a greater investment of resources in software development to ensure that applications are safe. For mastering this complexity, compositional approaches can be used in the development of software by integrating and reusing existing reliable components. The correct application of such strategies, however, relies on the trust in the behaviour of the components and in the emergent behaviour of the composed components because failures may arise if the composition does not preserve essential properties. Problems may be introduced when two or more error-free components are integrated for the first time. This concern is even more relevant when a group of components is put together in order to perform certain tasks, especially in safety-critical applications, during which classical problems can arise, such as livelock. In this thesis, we present a local strategy that guarantees, by construction, the absence of livelock in synchronous systems as modelled using the standard CSP notation. Our method is based solely on the local analysis of the minimum sequences that lead the CSP model back to its initial state. Locality provides an alternative to circumvent the state explosion generated by the interaction of components and allows us to identify livelock before composition. The verification of these conditions use metadata that allow us to record partial results of verification, decreasing the overall analysis effort. In addition, our work can also be applied to check livelock freedom in models that perform asynchronous communications. In this case, we carry out livelock analysis in the context of a component model, BR IC, whose behaviour of the components is described as a CSP process. Finally, we introduce three case studies to evaluate our livelock analysis technique in practice: the Milner?s scheduler and two variations of the dining philosophers, a livelock-free version and a version in which we have deliberately included livelock. For each case study, we also present a comparative analysis of the performance of our strategy with two other techniques for livelock freedom verification, the traditional global analysis of FDR and the static livelock analysis of SLAP. This comparative study demonstrates that our strategy can be used in practice and that it might be a useful alternative for establishing livelock freedom in large systems.
Tizzei, Leonardo Pondian 1980. "Evolução de arquiteturas de linhas de produtos baseadas em componentes e aspectos." [s.n.], 2012. http://repositorio.unicamp.br/jspui/handle/REPOSIP/275690.
Full textTese (doutorado) ¿ Universidade Estadual de Campinas, Instituto de Computação
Made available in DSpace on 2018-08-21T03:56:22Z (GMT). No. of bitstreams: 1 Tizzei_LeonardoPondian_D.pdf: 4801081 bytes, checksum: 4be6c243f0c9f62c50e330561161fcdd (MD5) Previous issue date: 2012
Resumo: Arquiteturas de linhas de produtos são essenciais para facilitar a evolução das linhas, pois ajudam a lidar com sua complexidade, abstraindo seus detalhes de implementação. A variabilidade arquitetural difere arquiteturas de linhas de produtos de arquiteturas de sistemas únicos. Ela reflete a existência de alternativas de projeto arquitetural e é expressa por meio de um conjunto de pontos de variação e variantes arquiteturais. A variabilidade arquitetural pode dificultar a evolução de arquiteturas de linhas produtos, pois a implementação da variabilidade software pode aumentar a complexidade da arquitetura com a possível adição de elementos e dependências extras. A variabilidade de linhas de produtos é usualmente capturada modelo de características e implementado pela arquitetura de linha de produtos. Entretanto, a implementação de características, pontos de variação e variantes podem estar espalhados por diversos elementos arquiteturais, o que dificulta a sua evolução. Em geral, cenários de evolução de linhas de produto envolvem adição e/ou remoção de características, mudança de uma característica obrigatória para opcional, entre outros. Quando cenários de evolução afetam características cujas implementações estão espalhadas na arquitetura, eles podem causar impacto de mudança em vários elementos arquiteturais. Estudos recentes exploram o uso de aspectos para modularizar a implementação de características em arquiteturas de linhas de produtos. Aspectos são usados para modularizar interesses transversais que, no contexto de linhas de produtos, são interesses que afetam diversas características. Contudo, esses estudos não consideram (i) arquiteturas componentizadas com interfaces explícitas e (ii) o uso integrado de componentes e aspectos para modularizar a implementação da variabilidade arquitetural. Idealmente aspectos devem ser modelados o mais cedo possível, de preferência, junto com o modelo de características para possibilitar a criação de arquiteturas bem estruturadas com aspectos. Todavia, não existem modelos que integrem o modelo de características e aspectos, nem métodos que consideram aspectos para gerar arquiteturas de linhas produtos a partir do modelo de características. A solução proposta nesta tese envolve inicialmente um estudo comparativo para mostrar a facilidade de evolução de arquiteturas de linhas de produtos propiciada pelo uso integrado de componentes e aspectos. Em seguida, é proposta uma visão estendida do modelo de características que permite representar características transversais. Essa visão, chamada de visão de características orientada a aspectos, é usada para criar arquiteturas de linhas de produtos orientadas a aspectos. Além disso, um modelo arquitetural de componentes é estendido para integrar aspectos para modularizar a variabilidade arquitetural. Por fim, o método FArM, que provê o mapeamento de modelo de características para modelos de arquitetura de linha de produtos, é estendido para considerar características transversais. Foram conduzidos dois estudos empíricos: um para avaliar se o uso integrado de componentes e aspectos facilita ou não a evolução de arquiteturas de linhas de produtos. O outro estudo empírico avalia a modelagem de características transversais e a extensão do método FArM propostos para projetar arquiteturas de linhas de produtos que sejam fáceis de evoluir. Os dois estudos apresentaram resultados promissores indicando que a solução proposta nesta tese facilita a evolução de arquiteturas de linhas de produtos
Abstract: Product line architectures are essential to facilitate the evolution of product lines, as they handle their complexity by abstracting implementation details. Architectural variability is what differs product line architectures from single system architectures. It reflects the existence of alternative design options and it is expressed by a set of architectural variation points and variants. Architectural variability can hinder product line architecture evolution because the implementation of software variability can increase architecture complexity by possibly adding extra elements and dependencies. Product line variability is usually captured in the feature model and it is implemented by product line architectures. However, the implementation of features, variation points, and variants may be scattered over architectural elements, which can hinder its evolution. In general, product line evolution scenarios involve feature addition/removal, changing a mandatory feature to an optional feature, and so forth. When evolution scenarios affect features whose implementations are scattered over architecture, they can cause a great change impact on several architectural elements. Recent studies have explored the use of aspects to modularize feature implementation in product line architectures. Aspects can modularize crosscutting concerns, which, in the context of product lines, are concerns that affect several features. Nevertheless, these studies do not consider (i) componentized architectures with explicit interfaces, and (ii) the integration of aspects and components to modularize the implementation of architectural variability. Ideally, aspects should be modeled as soon as possible, preferably, together with the feature model in order to enable the design of well structured product line architectures with aspects. However, there are neither models which integrate features and aspects, nor methods that considers aspects to design product line architectures from the feature model. The solution proposed in this thesis involves a comparative study that presents the support for product line architecture evolution provided by the integration of components and aspects. Then, it is proposed an extended view of the feature model which enables to represent crosscutting features. This view, called aspect-oriented feature view, is used to design product line architectures with aspects. Lastly, the FArM method, which provides guidelines to map from the feature model to the product line architecture model, is extended to consider crosscutting features. Two empirical studies were conducted: one to assess whether the integration of components and aspects facilitates product line architecture evolution. The other empirical study evaluates whether the crosscutting feature modeling and the FArM method extension proposed supports the design of evolvable product line architectures. Both studies presented promising results which indicate that the solution proposed in this thesis facilitates product line architecture evolution
Doutorado
Ciência da Computação
Doutor em Ciência da Computação
Cordeiro, André Lima. "A Prática como Componente Curricular em licenciaturas de Letras: um estudo discursivo das relações entre teoria e prática." Universidade do Estado do Rio de Janeiro, 2015. http://www.bdtd.uerj.br/tde_busca/arquivo.php?codArquivo=9466.
Full textThe purpose of this paper was to research, from de graduation reform on university occurred in 2001, the constitution of the disciplinary axis called Practice as a curricular component (PCC) in the graduation curriculum of the language education - Portuguese / Spanish - courses in the southeast region of Brazil focusing on the relation between theory and practice. We based our discussion on the thoughts of Deleuze (1968) to question the possibilities of total repetition or total differentiation; Vázquez (1977), bringing his discussion about práxis that talks about the impossibility to dissociate theory and practice and Schwartz (2010, to incorporate the discussion of the field of labor, in particular what concerns the impossibility of complete anticipation of the activity to be accomplished by a professional. We operate, also, with the concepts of the Discourse Analysis (MAINGUENEAU, 1998, 2003) as we consider the enunciates as socio-historic situated during our analysis. To accomplish our goal, we did a documental contextualization that included the analysis of the legal document 28/2001, in which are the determinations about the amount of hours and the definition of the graduation discipline axis, being: Academic Scientific, Practice as an Curricular Component and Supervised Training. We looked, also, to the Politic Pedagogic Projects of the analyzed universities, in order to research the understanding of practice built in these documents. Finally, we turned to the syllabus of the obligatory disciplines of PCC offered by the chosen universities, trying to identify the marks that bring together the discipline theme and labor that considers the teacher's work, since the axis of PCC is about this discussion. As criteria to choose the university, we used: one university of each state from the southeast region; two universities with disciplines that have, exclusively, hours from the PCC and two others with disciplines of PCC and AC. Therefore, the universities are: UERJ, UFSCar, UFES e UFTM.
Henriqueto, Sofia Isabel Costa. "A componente prático-laboratorial de Física e Química A - Ano I e a formação dos alunos do ensino secundário." Master's thesis, Universidade de Évora, 2008. http://hdl.handle.net/10174/18229.
Full textCervo, Victor Leonardo. "Seleção de variáveis para clusterização através de índices de importância das variáveis e Análise de Componentes Principais." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2013. http://hdl.handle.net/10183/75915.
Full textThis thesis proposes new approaches for variable selection aimed at forming representative groups of observations. For that matter, we suggest a new variable importance index based on parameters derived from the Principal Component Analysis (PCA), which is integrated to a forward procedure for variable selection. The quality of clustering procedure is assessed by the Silhouette Index. A simulation study is designed to evaluate the robustness of the proposed method on different levels of variable correlation, noise and number of observations to be clustered. Next, we modify the original method by remapping observations through kernel functions tailored to improving the clustering quality and reducing the retained variables. The modified version is applied to 3 databases related to chemical processes, increasing the quality of clustering measured by SI on average 150%, while using around 6% of the original variables.