Relevant bibliographies by topics / Ejector cleaning installation

Contents

  1. Journal articles
  2. Dissertations / Theses

Academic literature on the topic 'Ejector cleaning installation'

Author: Grafiati
Published: 28 May 2022
Last updated: 30 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Ejector cleaning installation.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Ejector cleaning installation"

1

Shashin, A., R. Sheps, A. Seminenko, and V. Minko. "LOCAL EXHAUST VENTILATION WITH EJECTION OF EXPLOSIVE SUBSTANCES AND RECIRCULATION OF PURIFIED AIR." Bulletin of Belgorod State Technological University named after. V. G. Shukhov 6, no. 2 (2021): 28–37. http://dx.doi.org/10.34031/2071-7318-2021-6-2-28-37.

Full text
Abstract:
Exhaust ventilation systems in industrial enterprises and facilities with the use of harmful substances largely determine the air exchange in the workplace to ensure normalized sanitary and hygienic conditions and operating costs. Local exhaust ventilation of explosive harmful substances is of particular importance for effective air exchange in such rooms, since their localization, suction and transportation are subject to increased requirements. The paper presents the results of analytical and experimental studies of the operation mode of a complex local exhaust device with a gas ejector for
APA, Harvard, Vancouver, ISO, and other styles
2

Ксенофонтов, Boris Ksyenofontov, Антонова, and E. Antonova. "Research of Disperse Composition of Air-and-Water Mix Generated by Ejector Aeration System During Wastewater Floatation Treatment." Safety in Technosphere 5, no. 4 (2016): 38–44. http://dx.doi.org/10.12737/23760.

Full text
Abstract:
The process of waste water treatment by floatation using ejector system of aeration has been considered in this paper. The system’s main shortcoming has been noted: receipt of large bubbles with a diameter about 1 mm, that not always allows get a high performance of cleaning. It has been noted that the most effectively the process of floatation treatment for industrial sewage from fine pollutions is performed when the bubbles’ sizes are less than 100 microns, and when there is a big range of pollutions in water it is reasonable to receive the bubbles with a wide disperse structure. The carried
APA, Harvard, Vancouver, ISO, and other styles
3

Zeynab Abdullayeva, Zeynab Abdullayeva. "REMOVAL OF HIGH-MOLECULAR COMPOUNDS UNDER ACTION OF BAF-1 REAGENT INCLUDED BY DEPOSITS DURING STORAGE OF TRANSPORTED OIL IN TANKS." PAHTEI-Procedings of Azerbaijan High Technical Educational Institutions 13, no. 02 (2022): 04–17. http://dx.doi.org/10.36962/pahtei13022022-04.

Full text
Abstract:
Sedimentation occurs during storage and transportation of all produced oil, which leads to a reduction in the effective capacity of tanks, corrosion spills, difficulty in checking the condition of the tank, a large amount of oil loss and, most importantly, changes in the composition of oil. This, in turn, leads to a decrease in the volume of the fraction during oil refining. In order to effectively combat sediment formation, it is necessary to determine its essence, as well as the basic laws of this process. One of the most important problems in the operation of tanks is their cleaning. During
APA, Harvard, Vancouver, ISO, and other styles
4

Lebedev, Dmitriy V., and Evgeniy A. Rozhkov. "Development of an Optoelectronic Plant for the Analysis and Sorting of Grain Products." Elektrotekhnologii i elektrooborudovanie v APK 2, no. 43 (2021): 68–77. http://dx.doi.org/10.22314/2658-4859-2021-68-2-68-77.

Full text
Abstract:
The grain industry is an important branch of agriculture. It is directly related to the harvesting, transportation, storage and processing of grain. To ensure the high quality of grain bulk products, there are currently used various electrotechnological grain cleaning plants. The most modern and effective are optoelectronic grain sort-ers (photo separators). However, there are a number of technological and structural disadvantages that reduce the efficiency of separating the grain mass into fractions and the performance of photo separators. That is why the problem of increasing the efficiency
APA, Harvard, Vancouver, ISO, and other styles
5

Soldatenko, L., A. Shipko, and I. Shipko. "ATTEMPT TO IMPROVE THE OPERATING AND TECHNOLOGICAL PROPERTIES OF THE COMBINED GRAIN WASHING MACHINE." Grain Products and Mixed Fodder’s 21, no. 2 (2021). http://dx.doi.org/10.15673/gpmf.v21i2.2183.

Full text
Abstract:
Washing machines are used in the production lines of grain cleaning departments of flour mills for thorough cleaning of the grain surface, in particular, its grooves from the remnants of organic and mineral dust, microorganisms and mold. In addition, the grain mass during washing is cleaned of hydrodynamically light and heavy impurities - chaff, seeds of waste plants, straw fragments, mineral particles in the form of sand, small stones, lumps of earth, as well as spores and wormwood seeds. At the same time, foreign odors of grain disappear.Experience in the operation of Ж9-БМА machines shows t
APA, Harvard, Vancouver, ISO, and other styles
6

Yesoyan, A. M., A. A. Matevosyan та Yesoyan A.A. "ԿԱՐՏՈՖԻԼԱՀԱՆ ՄԵՔԵՆԱՅԻ ՌՈՏԱՑԻՈՆ ԿՈՇՏԱՄԱՆՐԻՉ-ՓՈԽԱԿՐԻՉԻ ԴԱՆԱԿՈՎ ԿՏՐՎԱԾ ՀՈՂԱՅԻՆ ՏԱՇԵՂԻ ԹՌԻՉՔԻ ՀԵՏԱԶՈՏՈՒԹՅՈՒՆԸ". AgriScience and Technology, 2024, 9–13. http://dx.doi.org/10.52276/25792822-2024.1-9.

Full text
Abstract:
Potato peeling machines do not provide the necessary technological quality of the tuber cleaning process. The shovel separation system operating in heavy ground conditions must be equipped with a dynamic shredder of tubers. the driving mechanism of grinding and pipelining, operating on a dynamic principle, is located in front of the goiter of the potato peeling machine and covers the entire profile of the tuber. The ground chips cut from the tuber should be thrown into the aisle to reduce the amount of soil in the tuber-soil mass, the most purified tuber mass from the soil should be fed into t
APA, Harvard, Vancouver, ISO, and other styles
7

Afonina, E. I., S. N. Titkov, S. N. Aliferova, and I. Yu Tupitsin. "The study of the column flotation capacities for stimulation of potash ore flotation." Gornyi Zhurnal, April 30, 2021, 77–81. http://dx.doi.org/10.17580/gzh.2021.04.11.

Full text
Abstract:
Potassium ore contains readily sludgable water-insoluble silicate–carbonate impurities which actively adsorb cation collectors (primary alkylamines) used in sylvine flotation. This fact determines inclusion of multistage de-sludging flowsheets, with rougher and cleaning flotation of sludge in the processing technology. A prerequisite for flotation de-sludging of ore is pre-flocculation of sludge. Flotation of sludge in mechanical flotation machines is carried out with intensive mechanical stirring of the suspension, which impairs the selective separation of sludge into the flotation froth and
APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Ejector cleaning installation"

1

Маценко, І. М. "Розрахункове та експериментальне дослідження технологічних параметрів ежекторно-очисної установки з метою підвищення її ефективності". Master's thesis, Сумський державний університет, 2020. https://essuir.sumdu.edu.ua/handle/123456789/82290.

Full text
Abstract:
У даній роботі проводилося дослідження ежекторно-очисної установки з метою виявлення можливих шляхів по підвищенню ефективності оброблення деталей. В якості ежектора використовується піскоструменеве сопло, від ефективності якого залежить ефективність всієї піскоструменевої установки. У робочому соплі змішуються два потоки: абразивного матеріалу та повітря. Течія абразивної суміші, що проходить через сопло, в даній роботі досліджувалася чисельно та експериментально.<br>В данной работе проводилось исследование эжекторно-очистной установки с целью выявления возможных путей по повышению эффективно
APA, Harvard, Vancouver, ISO, and other styles
2

Мірошніченко, М. О. "Підвищення ефективності технології струменево-абразивного оброблення". Master's thesis, Сумський державний університет, 2020. https://essuir.sumdu.edu.ua/handle/123456789/82291.

Full text
Abstract:
У даній роботі проводилося дослідження ежекторно-очисної установки з метою виявлення можливих шляхів по підвищенню ефективності оброблення деталей. В якості ежектора використовується піскоструменеве сопло, від ефективності якого залежить ефективність всієї піскоструменевої установки. У робочому соплі змішуються два потоки: абразивного матеріалу та повітря. Течія абразивної суміші, що проходить через сопло, в даній роботі досліджувалася чисельно та експериментально.<br>В данной работе проводилось исследование эжекторно-очистной установки с целью выявления возможных путей по повышению эффективно
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography