To see the other types of publications on this topic, follow the link: Elastic force.

Journal articles on the topic 'Elastic force'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Elastic force.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Raza, Monis, Mridu Sethi, Piush Kumar, Payal Sharma, and Ankit Kumar Shahi. "Time-dependent force depreciation of intraoral orthodontic elastics of variable force and lumen sizes – An in vitro study." Journal of Contemporary Orthodontics 8, no. 1 (2024): 23–28. http://dx.doi.org/10.18231/j.jco.2024.004.

Full text
Abstract:
: To evaluate force decay of elastics of different dimensions and different force values over 48-hours.Steps included extension and immersion of elastics in artificial saliva and measurement of force levels at a specified point of time. A model with vertical pins placed at in the oral cavity. The initial force measurement was done using Universal testing machine before the elastics were engaged onto the pins 37⁰C in artificial saliva. The reading was taken after this in the Universal testing machine for the samples. The elastics were then placed back into the static simulation for the next 23
APA, Harvard, Vancouver, ISO, and other styles
2

Notaroberto, Daniela Ferreira de Carvalho, Mariana Martins e. Martins, Maria Teresa de Andrade Goldner, Alvaro de Moraes Mendes, and Cátia Cardoso Abdo Quintão. "Force decay evaluation of latex and non-latex orthodontic intraoral elastics: in vivo study." Dental Press Journal of Orthodontics 23, no. 6 (2018): 42–47. http://dx.doi.org/10.1590/2177-6709.23.6.042-047.oar.

Full text
Abstract:
ABSTRACT Objective: This clinical study was conducted in order to evaluate force decay over time of latex and non-latex orthodontic intraoral elastics. Methods: Patients (n = 15) were evaluated using latex and non-latex elastics in the periods of : 0, 1, 3, 12 and 24 hours. The rubber bands were transferred to the testing machine (EMIC DL-500 MF), and force values were recorded after stretching the elastic to a length of 25mm. Paired t test was applied and analysis of variance (ANOVA) was used to evaluate the variation of force generated. LSD (Fisher’s least significant difference) post-hoc te
APA, Harvard, Vancouver, ISO, and other styles
3

Camilla Ivini Viana Vieira, Cibele Braga de Oliveira, Alexandre Antonio Ribeiro, et al. "In vitro comparison of the force degradation of orthodontic intraoral elastics from different compositions." RSBO 10, no. 1 (2014): 40–8. http://dx.doi.org/10.21726/rsbo.v10i1.893.

Full text
Abstract:
The synthetic intermaxillary elastic emerged as an alternative for clinical use in patients with latex sensitivity. However, there are disagreements about this elastic protocol use according to the force degradation. Objective: The aim of this study was to evaluate, in vitro, the forces generated by latex and synthetic elastics over time. Material and methods: Sample size of 840 elastics were used (420 latex and 420 synthetic), delivering medium strength (Dental Morelli®) with internal diameter of 1/8”, 3/16”, 1/4” and 5/16”. The elastics were randomly divided into 6 groups according to the ti
APA, Harvard, Vancouver, ISO, and other styles
4

QUENZER, Júlia Polezi, Adriana Simoni LUCATO, Silvia Amélia Scudeler VEDOVELLO, Heloísa Cristina VALDRIGHI, and Mario VEDOVELLO FILHO. "Influence of elastic chain in the degradation of orthodontic forces - in vitro study." Revista de Odontologia da UNESP 44, no. 6 (2015): 320–25. http://dx.doi.org/10.1590/1807-2577.0075.

Full text
Abstract:
AbstractIntroductionElastic chains are indispensable accessories in orthodontic treatment. Changes in their properties are of great interest to professionals in order to gain greater control over tooth movements.ObjectiveEvaluate the influence of trademark and length of the spacer chain on force degradation of elastic.Material and methodWe used the following elastic chain types: TP, Rocky Mountain (RMO) and GAC short, medium and long varieties. The elastics, which contained links corresponding to 12.5 mm, were tensioned between steel pins using Instron 4411 universal testing machine up to 25 m
APA, Harvard, Vancouver, ISO, and other styles
5

Malanon, Sasatorn, Surachai Dechkunakorn, Niwat Anuwongnukroh, and Wassana Wichai. "Comparison of Three Commercial Latex and Non-Latex Orthodontic Elastic Bands." Key Engineering Materials 814 (July 2019): 354–59. http://dx.doi.org/10.4028/www.scientific.net/kem.814.354.

Full text
Abstract:
Orthodontic elastic bands are commonly made from natural rubber because they provide high resiliency at a reasonable cost. However, hypersensitivity related to protein present in latex have been reported in some patients which has led to increased usage of non-latex elastic alternatives. Therefore, the assessment of their mechanical properties is of importance. The objective of this study was to compare the physical and mechanical properties of three commercial latex and non-latex type orthodontic elastic bands. Samples of latex and non-latex type orthodontic elastics from manufacturers – AO (
APA, Harvard, Vancouver, ISO, and other styles
6

Notaroberto, Daniela Ferreira de Carvalho, Mariana Martins e. Martins, Maria Teresa de Andrade Goldner, Cátia Abdo Quintão, and Alvaro de Moraes Mendes. "Analysis in vitro of strength degradation comparing latex and non-latex elastics." Brazilian Journal of Oral Sciences 17 (October 30, 2018): e18144. http://dx.doi.org/10.20396/bjos.v17i0.8653813.

Full text
Abstract:
Aim: This study was conducted in order to evaluate and compare the behavior of latex and non-latex elastics, as the loss of strength over time in vitro. Methods: The study evaluated 15 of each elastic material for the pre-selected times: 0, 1, 3, 12 and 24 hours. The rubber bands were transferred to the testing machine (EMIC DL-500 MF). The force values were recorded after stretching the elastic to a length of 25mm. Independent t-test was applied. Analysis of variance (ANOVA) was used to check the variation of the forces generated between those determined times. To identify between which times
APA, Harvard, Vancouver, ISO, and other styles
7

Suparwitri, Sri, Niswati Fathmah Rosyida, and Ananto Ali Alhasyimi. "Does mouthwash degrade the force of orthodontic latex elastics?" International Journal of Public Health Science (IJPHS) 11, no. 4 (2022): 1350. http://dx.doi.org/10.11591/ijphs.v11i4.21923.

Full text
Abstract:
With the surge of COVID-19 pandemic, orthodontists have recommended the use of mouthwashes. However, this product frequently contains ingredients that can modify the mouth's pH and elastic force. This study examined the influence of mouthwashes on latex elastic force deterioration. One hundred orthodontic latex elastics (1/4”) were separated into five groups: control, zinc sulfate 0.2%, chlorhexidine 0.2%, sodium fluoride 0.2%, and povidone–iodine 1%. The samples were stretched to 19.05 mm, stored in artificial saliva solutions, and incubated. Groups 2–5 tested mouthwashes for 60 seconds every
APA, Harvard, Vancouver, ISO, and other styles
8

Csekő, Kata, Péter Maróti, Zsuzsanna Helyes, et al. "The Effect of Extrinsic Factors on the Mechanical Behavior and Structure of Elastic Dental Ligatures and Chains." Polymers 14, no. 1 (2021): 38. http://dx.doi.org/10.3390/polym14010038.

Full text
Abstract:
Force provided by elastomers used in orthodontics can be affected by several factors present in the oral cavity. The aim of our study was to investigate the role of mouthwashes, toothbrushing, and smoking in the force decay of such elastomers. Tensile strength, changes in the force continuously exerted, and force decay of elastic chains (Ortho Organizer and Masel Short Power Chain) and elastic ligatures (Dentaurum and Masel) by two separate manufacturers were measured. Measurements were initially made on untreated elastics, followed by exposure to different environmental factors including ciga
APA, Harvard, Vancouver, ISO, and other styles
9

Tarannum, Ghazia, Tania Shaw, and Ragni Tandon. "Let’s review the intermaxillary elastics in orthodontics." Asian Journal of Oral Health and Allied Sciences 14 (July 18, 2024): 10. http://dx.doi.org/10.25259/ajohas_3_2024.

Full text
Abstract:
Elastics play an important role in orthodontic treatment by exerting forces on the teeth and jaws to achieve proper alignment and correct malalignment. These are commonly used in combination with braces and/or with other orthodontic appliances to help move the teeth into their desired positions. The use of elastics is believed to arise from many years ago for different purposes in orthodontics. Intraoral elastics can be classified into sagittal, transverse, and vertical planes, and according to force delivery, elastics can be high pull, medium pull, and heavy pull. Like every dental material,
APA, Harvard, Vancouver, ISO, and other styles
10

Malanon, Sasatorn, Surachai Dechkunakorn, Niwat Anuwongnukroh, Pongdhorn Sea-Oui, Puchong Thaptong, and Wassana Wicha. "Mechanical Properties of Experimental Non-Latex Orthodontic Elastic Bands." Applied Mechanics and Materials 897 (April 2020): 185–89. http://dx.doi.org/10.4028/www.scientific.net/amm.897.185.

Full text
Abstract:
. Elastics, a source of continuous orthodontic force, are divided into two types, latex and non-latex, which are made from natural rubber and synthetic rubber, respectively. The major advantage of natural latex elastics is its resiliency to intraoral tractive forces. However, as the incidence of allergic reactions to natural latex has become more widely recognized, non-latex orthodontic elastics have been developed as an alternative. The aim of this study is to investigate the in vitro mechanical properties of Thai non-latex orthodontic elastics as compared to commercially available products.
APA, Harvard, Vancouver, ISO, and other styles
11

Kardach, Hubert, Aneta Olszewska, Ewa Firlej, et al. "Force decay of intermaxillary orthodontic elastics: in vitro study." Journal of Medical Science 88, no. 2 (2019): 91–95. http://dx.doi.org/10.20883/jms.316.

Full text
Abstract:
Introduction. Orthodontic elastics are widely used in orthodontic treatment. It’s been proved that they have advantages such as low cost, ease of use, but also disadvantages, mainly force decay in time and increased entrapment of biofilm. Amount of the force is of extreme significance. This force can be altered by physical or chemical factors. Material and Methods. Latex elastics in 3 different diameters were selected for this study. Each elastic was stretched and placed on hooks that are at specified distances that equal 3 times the diameter of each elastic. The forces produced by stretching
APA, Harvard, Vancouver, ISO, and other styles
12

Sri, Suparwitri, Fathmah Rosyida Niswati, and Ali Alhasyimi Ananto. "Does mouthwash degrade the force of orthodontic latex elastics?" International Journal of Public Health Science (IJPHS) 11, no. 4 (2022): 1350~1356. https://doi.org/10.11591/ijphs.v11i4.21923.

Full text
Abstract:
With the surge of COVID-19 pandemic, orthodontists have recommended the use of mouthwashes. However, this product frequently contains ingredients that can modify the mouth's pH and elastic force. This study examined the influence of mouthwashes on latex elastic force deterioration. One hundred orthodontic latex elastics (1/4”) were separated into five groups: control, zinc sulfate 0.2%, chlorhexidine 0.2%, sodium fluoride 0.2%, and povidone–iodine 1%. The samples were stretched to 19.05 mm, stored in artificial saliva solutions, and incubated. Groups 2–5 tested mouthwashe
APA, Harvard, Vancouver, ISO, and other styles
13

Tokatli, Ozan, and Volkan Patoglu. "Non-Overshooting Force Control of Series Elastic Actuators." Solid State Phenomena 166-167 (September 2010): 421–26. http://dx.doi.org/10.4028/www.scientific.net/ssp.166-167.421.

Full text
Abstract:
Whenever mechanical devices are used to interact with the environment, accurate control of the forces occurring at the interaction surfaces arises as an important challenge. Traditionally, force controlled systems utilize stiff force sensors in the feedback loop to measure and regulate the interaction forces. Series elastic actuation (SEA) is an alternative approach to force control, in which the deflection of a compliant element (orders of magnitude less stiff than a typical force sensor) placed between motor and the environment is controlled to regulate the interaction forces. The use of SEA
APA, Harvard, Vancouver, ISO, and other styles
14

Ali, Bagherzadeh, Zia Tohidi Reza, and Sadeghi Abbasali. "A Novel Analytical Approach for Assessing the Buckling Behavior of Non-Prismatic Elastic Columns Based on Power Series." Journal of Civil Engineering and Materials Application 7, no. 1 (2023): 11–21. https://doi.org/10.22034/jcema.2023.382603.1101.

Full text
Abstract:
The analysis of post-buckling behavior of elastic structures still needs the resolution of a body of non-linear differential equations according to equilibrium equations. Also, the yielding and buckling factors are important in the procedure of designing members under forces such as axial or conjoint axial force and bending moment. In such a way that if the length of the member is too long or the member is thin, before the yielding, buckling will occur in the member, and it is necessary to check and control the member for possible buckling. The present work deals with the stability analysis of
APA, Harvard, Vancouver, ISO, and other styles
15

Wu, Er Jun, and Xing Chen. "Calculation on Plastic Internal Force of Reinforced Concrete Member under Axial Force." Applied Mechanics and Materials 578-579 (July 2014): 31–36. http://dx.doi.org/10.4028/www.scientific.net/amm.578-579.31.

Full text
Abstract:
The design of reinforced concrete structure often used the elastic internal force as the design basis, but the nonlinear behavior of reinforced concrete structures brings about errors in calculation of statically indeterminate structure. By considering the nonlinear properties, the mechanical responses of reinforced concrete structure were investigated, on which an axial force loaded at their middle span section. In a series of analysis on internal force of the reinforced concrete member at all loading stages, through the deformation compatibility equation and the balance equation, the formula
APA, Harvard, Vancouver, ISO, and other styles
16

Li, Wangxin, Mingfeng Ge, Ruihao Jia, Xin Zhao, Hailiang Zhao, and Chuanhe Dong. "Design and Analysis Method of Piezoelectric Liquid Driving Device with Elastic External Displacement." Micromachines 15, no. 4 (2024): 523. http://dx.doi.org/10.3390/mi15040523.

Full text
Abstract:
In piezoelectric drive, resonant drive is an important driving mode in which the external elastic force and electric drive signal are the key factors. In this paper, the effects of the coupling of external elastic force and liquid parameters with the structure on the vibrator resonance frequency and liquid drive are analyzed by numerical simulation. The fluid-structure coupling model for numerical analysis of the elastic force was established, the principle of microdroplet generation and the coupling method of the elastic force were studied, and the changes in the resonant frequency and mode i
APA, Harvard, Vancouver, ISO, and other styles
17

Ruzmetov, Yadgor, Oksana Molchanova, and Jamol Shihnazarov. "Calculation of solid-state cargo fastener under the influence of longitudinal forces." E3S Web of Conferences 157 (2020): 01016. http://dx.doi.org/10.1051/e3sconf/202015701016.

Full text
Abstract:
Cargo securing on a railway platform, elastic and retention fasteners, longitudinal transport force of inertia, forces in elastic fastenings. Purpose: The paper presents the calculation of the longitudinal transport force of inertia; determines the longitudinal force perceived by the elastic elements of the cargo securing; determines the reactions of retention bars depending on the number of bars and fasteners (nail); calculates the sum of all holding forces; calculates the forces in the elastic fasteners when exposed to longitudinal forces. Research methods: To determine the forces in the car
APA, Harvard, Vancouver, ISO, and other styles
18

Kojima, Yasufumi, Shota Kisaka, and Kotaro Fujisawa. "Magnetic field sustained by the elastic force in neutron star crusts." Monthly Notices of the Royal Astronomical Society 511, no. 1 (2022): 480–87. http://dx.doi.org/10.1093/mnras/stac036.

Full text
Abstract:
ABSTRACT We investigate the magneto–elastic equilibrium of a neutron star crust and magnetic energy stored by the elastic force. The solenoidal motion driven by the Lorentz force can be controlled by the magnetic elastic force, so that conditions for the magnetic field strength and geometry are less restrictive. For equilibrium models, the minor solenoidal part of the magnetic force is balanced by a weak elastic force because the irrotational part is balanced by the dominant gravity and pressure forces. Therefore, a strong magnetic field may be confined in the interior, regardless of poloidal
APA, Harvard, Vancouver, ISO, and other styles
19

Sambani, Kyriaki, Stylianos Vasileios Kontomaris, and Dido Yova. "Atomic Force Microscopy Imaging of Elastin Nanofibers Self-Assembly." Materials 16, no. 12 (2023): 4313. http://dx.doi.org/10.3390/ma16124313.

Full text
Abstract:
Elastin is an extracellular matrix protein, providing elasticity to the organs, such as skin, blood vessels, lungs and elastic ligaments, presenting self-assembling ability to form elastic fibers. The elastin protein, as a component of elastin fibers, is one of the major proteins found in connective tissue and is responsible for the elasticity of tissues. It provides resilience to the human body, assembled as a continuous mesh of fibers that require to be deformed repetitively and reversibly. Thus, it is of great importance to investigate the development of the nanostructural surface of elasti
APA, Harvard, Vancouver, ISO, and other styles
20

Yu, H. Y., and Sanboh Lee. "Time-harmonic elastic singularities and oscillating indentation of layered solids." IMA Journal of Applied Mathematics 85, no. 4 (2020): 542–63. http://dx.doi.org/10.1093/imamat/hxaa017.

Full text
Abstract:
Abstract A new approach is proposed for obtaining the dynamic elastic response of a multilayered elastic solid caused by axisymmetric, time-harmonic elastic singularities. The method for obtaining the elastodynamic Green’s functions of the point force, double forces and center of dilatation is presented. For this purpose, the boundary conditions in an infinite solid at the plane passing through the singularity are derived first by using Helmholtz potentials. Then the Green’s function solution for layered solids is obtained by solving a set of simultaneous linear algebraic equations using the b
APA, Harvard, Vancouver, ISO, and other styles
21

KOSHTYBAYEV, T., S. ALIYEV, T. DIKAMBAI, and M. ALIYEVA. "Mathematical identity of the laws of elastic deformations and hydrostatics." Bulletin of the National Engineering Academy of the Republic of Kazakhstan 91, no. 1 (2024): 188–95. http://dx.doi.org/10.47533/2024.1606-146x.18.

Full text
Abstract:
According to Newton’s third law, in nature, the action of one body on another generates a reaction. This is best manifested by the laws of elastic deformation and hydrostatics, which are not similar in nature, but identical in mathematical mechanism. The article shows a comparative and identical approach to obtaining expressions of elastic deformation force and Archimedean force. The total values of the counteracting forces are determined through the values of the forces arising from the elastic deformation of the unit length of the spring and the displacement of a liquid of a single volume. T
APA, Harvard, Vancouver, ISO, and other styles
22

Yilmaz, Berza Sen, Mihriban Kara, Elif Dilara Seker, and Deniz Yenidünya. "Do we know how much force we apply with latex intermaxillary elastics?" APOS Trends in Orthodontics 11 (October 5, 2021): 191–97. http://dx.doi.org/10.25259/apos_68_2021.

Full text
Abstract:
Objectives: The aim of our study was to evaluate the variation of the forces provided by different branded elastics and to compare the force diminution that occurs after 24-h of use in wet environment. Materials and Methods: Elastics from four different manufacturer (American Orthodontics [AO], USA; Dentaurum [DENT], Germany; Ormco, USA; RMO, USA) with 3/16-inch (4.8 mm) lumen diameter, and two different force degrees (medium/heavy) were included in the study with a total of eight groups of elastics. First force measurements were performed with 50 elastics of each group at various stretching d
APA, Harvard, Vancouver, ISO, and other styles
23

Yilmaz, Berza Sen, Mihriban Kara, Elif Dilara Seker, and Deniz Yenidünya. "Do we know how much force we apply with latex intermaxillary elastics?" APOS Trends in Orthodontics 11 (October 5, 2021): 191–97. http://dx.doi.org/10.25259/apos_68_2021.

Full text
Abstract:
Objectives: The aim of our study was to evaluate the variation of the forces provided by different branded elastics and to compare the force diminution that occurs after 24-h of use in wet environment. Materials and Methods: Elastics from four different manufacturer (American Orthodontics [AO], USA; Dentaurum [DENT], Germany; Ormco, USA; RMO, USA) with 3/16-inch (4.8 mm) lumen diameter, and two different force degrees (medium/heavy) were included in the study with a total of eight groups of elastics. First force measurements were performed with 50 elastics of each group at various stretching d
APA, Harvard, Vancouver, ISO, and other styles
24

Bandéca, Matheus Coelho, Rudys Rodolfo de Jesus Tavarez, Adelson Mota de Aguiar, et al. "The Prestretching Effect on the Force Decay of Orthodontic Elastic Chain." Journal of Contemporary Dental Practice 15, no. 4 (2014): 456–60. http://dx.doi.org/10.5005/jp-journals-10024-1562.

Full text
Abstract:
ABSTRACT This in vitro study evaluated the influence of prestretching, in the force decay of orthodontic elastic chains, at three time intervals 2, 7 and 30 days with the brands Morelli, Orthometric and American Orthodontics. In the experimental group, prestretching was performed, stretching the elastics to increase them by 50% of their original length three times in a quick and sequential mode. All of the elastic chains were kept stretched and stored in artificial saliva at 37°C until the time of force measurement. For comparisons between the control and experimental groups, the Mann-Whitney
APA, Harvard, Vancouver, ISO, and other styles
25

Spector, A., and R. C. Batra. "On the Motion of an Elastic Body Rolling/Sliding on an Elastic Substrate." Journal of Tribology 117, no. 2 (1995): 308–14. http://dx.doi.org/10.1115/1.2831248.

Full text
Abstract:
The three-dimensional evolutionary problem of rolling/sliding of a linear elastic body on a linear elastic substrate is studied. The inertial properties of the body regarded as rigid are accounted for. By employing an asymptotic analysis, it is shown that the process can be divided into two phases: transient and quasistationary. An expression for the frictional force as a function of the externally applied forces and moments, and inertial properties of the body is derived. For an ellipsoid rolling/sliding on a linear elastic substrate, numerical results for the frictional force distribution, s
APA, Harvard, Vancouver, ISO, and other styles
26

Borodich, Feodor M., and Boris A. Galanov. "Non-direct estimations of adhesive and elastic properties of materials by depth-sensing indentation." Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences 464, no. 2098 (2008): 2759–76. http://dx.doi.org/10.1098/rspa.2008.0044.

Full text
Abstract:
Using the connection between depth-sensing indentation by spherical indenters and mechanics of adhesive contact, a new method for non-direct determination of adhesive and elastic properties of contacting materials is proposed. At low loads, the force–displacement curves reflect not only elastic properties but also adhesive properties of the contact, and therefore one can try to extract from experiments both the elastic characteristics of contacting materials (such as the reduced elastic modulus) and characteristics of molecular adhesion (such as the work of adhesion and the pull-off force) usi
APA, Harvard, Vancouver, ISO, and other styles
27

LEROY, S., and E. CHARLAIX. "Hydrodynamic interactions for the measurement of thin film elastic properties." Journal of Fluid Mechanics 674 (March 17, 2011): 389–407. http://dx.doi.org/10.1017/s0022112010006555.

Full text
Abstract:
We study the elasto-hydrodynamic (EHD) interaction of a sphere with a flat elastic surface in the prospect of measuring the elastic moduli of soft supported thin films, with non-contact dynamic surface forces or atomic force microscopy measurements. When the sphere is oscillated at a very small amplitude close to the surface, the linear force response undergoes a dynamic transition from a viscous-dominated behaviour at large distance to an elastic-dominated behaviour at short distance. In the limit of very thin or very thick supported layers, we show that the force response obeys simple scalin
APA, Harvard, Vancouver, ISO, and other styles
28

Yang, Chang, Rong Yu, and Shanglei Jiang. "A Cyclic Calibration Method of Milling Force Coefficients Considering Elastic Tool Deformation." Machines 11, no. 8 (2023): 821. http://dx.doi.org/10.3390/machines11080821.

Full text
Abstract:
In metal-cutting technology, milling plays an important role in the product development cycle. The accurate modeling and prediction of milling forces have always been research hotspots in this field. The mechanical model based on unit-cutting force coefficients has a high prediction accuracy of cutting forces, and it is therefore widely used in the modeling of milling forces. The calibration of the cutting force coefficients can be realized by linear regression analysis of the measured average milling forces, but it needs to carry out multiple groups of variable feed slot milling experiments w
APA, Harvard, Vancouver, ISO, and other styles
29

De Canio, Gabriele, Eric Lauga, and Raymond E. Goldstein. "Spontaneous oscillations of elastic filaments induced by molecular motors." Journal of The Royal Society Interface 14, no. 136 (2017): 20170491. http://dx.doi.org/10.1098/rsif.2017.0491.

Full text
Abstract:
It is known from the wave-like motion of microtubules in motility assays that the piconewton forces that motors produce can be sufficient to bend the filaments. In cellular phenomena such as cytosplasmic streaming, molecular motors translocate along cytoskeletal filaments, carrying cargo which entrains fluid. When large numbers of such forced filaments interact through the surrounding fluid, as in particular stages of oocyte development in Drosophila melanogaster , complex dynamics are observed, but the detailed mechanics underlying them has remained unclear. Motivated by these observations, w
APA, Harvard, Vancouver, ISO, and other styles
30

Xu, Yue, Tuojiang Wu, Yangxi Chen, and Zhiguang Zhang. "Regulation of the Response of the Adult Rat Condyle to Intermaxillary Asymmetric Force by the RANKL-OPG System." Angle Orthodontist 79, no. 4 (2009): 646–51. http://dx.doi.org/10.2319/061108-301.1.

Full text
Abstract:
Abstract Objective: To test the hypothesis that the RANKL-OPG system in the subchondral bone of adult rat condyles does not vary in response to different values of intermaxillary asymmetrical forces. Materials and Methods: The mandibular rami of 160 Sprague-Dawley rats (3 months old) were subjected to unilateral traction in the anterior-superior direction using an elastic force. We used 120 g and 40 g as the initial elastic forces, and then removed the traction after 28 days. The expression of RANKL and OPG in the subchondral bone of the condyles was analyzed by semiquantitative immunohistoche
APA, Harvard, Vancouver, ISO, and other styles
31

Mitsuzuka, Masahiko, Jun Takarada, Ikuo Kawahara, et al. "Application of High-Photoelasticity Polyurethane to Tactile Sensor for Robot Hands." Polymers 14, no. 23 (2022): 5057. http://dx.doi.org/10.3390/polym14235057.

Full text
Abstract:
We developed a tactile sensor for robot hands that can measure normal force (FZ) and tangential forces (FX and FY) using photoelasticity. This tactile sensor has three photodiodes and three light-emitting diode (LED) white light sources. The sensor is composed of multiple elastic materials, including a highly photoelastic polyurethane sheet, and the sensor can detect both normal and tangential forces through the deformation, ben sding, twisting, and extension of the elastic materials. The force detection utilizes the light scattering resulting from birefringence.
APA, Harvard, Vancouver, ISO, and other styles
32

Kolomiets, L., O. Lymarenko, A. Perederko, А. Tsymbalyuk, and D. Tsymbalyuk. "DETERMINATION OF THE STRESS AND DEFORMATION STATE OF ELASTIC ELEMENTS OF TENSION METER FORCE SENSORS." Key title: Zbìrnik naukovih pracʹ Odesʹkoï deržavnoï akademìï tehnìčnogo regulûvannâ ta âkostì, no. 1(22) (2023): 14–23. http://dx.doi.org/10.32684/2412-5288-2023-1-22-14-23.

Full text
Abstract:
The article shows that when measuring forces with weighing devices in long-term dynamic processes, the preservation of metrological parameters of tensor-resistor force sensors in a certain time interval acquires special importance. The causes of similar failures of force sensors can be fatigue phenomena occurring in the material of the elastic element. Functional failure associated with fatigue phenomena of the material of the elastic element is usually observed long before its complete destruction. Therefore, force-measuring chains of weighing devices are made in such a way that the elastic e
APA, Harvard, Vancouver, ISO, and other styles
33

Stan, Gheorghe, Sean W. King, and Robert F. Cook. "Elastic modulus of low-k dielectric thin films measured by load-dependent contact-resonance atomic force microscopy." Journal of Materials Research 24, no. 9 (2009): 2960–64. http://dx.doi.org/10.1557/jmr.2009.0357.

Full text
Abstract:
Correlated force and contact resonance versus displacement responses have been resolved using load-dependent contact-resonance atomic force microscopy (AFM) to determine the elastic modulus of low-k dielectric thin films. The measurements consisted of recording simultaneously both the deflection and resonance frequency shift of an AFM cantilever probe as the probe was gradually brought in and out of contact. As the applied forces were restricted to the range of adhesive forces, low-k dielectric films of elastic modulus varying from GPa to hundreds of GPa were measurable in this investigation.
APA, Harvard, Vancouver, ISO, and other styles
34

Turanov, Khabibulla, and Yadgor Ruzmetov. "On the shift of cargo on a railway platform under the influence of transverse forces." E3S Web of Conferences 157 (2020): 01012. http://dx.doi.org/10.1051/e3sconf/202015701012.

Full text
Abstract:
This paper dwells upon securing solid cargo on a railcar. Transverse cargo shift and forces of elastic securing devices. The authors sought to calculate the shearing force acting on the elastic securing elements and retention bars; the retentive forces that prevent cargo from shifting across the car (the transverse shift); the transverse cargo shift; the force of elastic securing elements as exposed to transverse forces. This study relies on the second law as applicable to relative motion for a frictional constraint, as known in theoretical mechanics. The paper presents the calculated shearing
APA, Harvard, Vancouver, ISO, and other styles
35

Umicevic-Davidovic, Mirjana, Marijana Arapovic-Savic, Adriana Arbutina, Tijana Adamovic, and Irena Kuzmanovic-Radman. "Analysis of sliding mechanics force degradation during postextraction space closure." Serbian Dental Journal 69, no. 3 (2022): 115–24. http://dx.doi.org/10.2298/sgs2203115u.

Full text
Abstract:
Introduction. Due to its simplicity, sliding mechanism is very often used in clinical practice for post-extraction space closure, however, the efficiency of this method may be reduced due to friction and changes in the properties of the materials used in this method. The most commonly used methods of sliding mechanics are nickel titanium (NiTi) closed coil spring and elastic chain. The aim of this study was to analyze force degradation in the application of nickel titanium closed coil springs and elastic chains during post-extraction space closure within treatment with fixed orthodontic applia
APA, Harvard, Vancouver, ISO, and other styles
36

Bosakov, S. V., and P. D. Skachok. "Concentrated Force Action on 1/8 Homogeneous Isotropic Space." Science & Technique 19, no. 5 (2020): 372–76. http://dx.doi.org/10.21122/2227-1031-2020-19-5-372-376.

Full text
Abstract:
Using the example of vertical displacements, it is shown that by combining a solution to the problem of determining vertical displacements from the action of four identical concentrated forces symmetrically applied to an elastic half-space and two identical concentrated forces symmetrically applied to an elastic quarter-space, one can obtain a solution about the action of one force on 1/8 of the elastic space with free edges. To find vertical displacements in an elastic half-space, the Boussinesq solution is used, and vertical displacements in an elastic quarter-space – an integral equation ob
APA, Harvard, Vancouver, ISO, and other styles
37

Barrows, L., and V. Barrows. "The mechanics of gravity-driven faulting." Solid Earth Discussions 2, no. 1 (2010): 105–44. http://dx.doi.org/10.5194/sed-2-105-2010.

Full text
Abstract:
Abstract. Faulting can result from either of two different mechanisms. These involve fundamentally different energetics. In elastic rebound, locked-in elastic strain energy is transformed into the earthquake (seismic waves plus work done in the fault zone). In force-driven faulting, the forces that create the stress on the fault supply work or energy to the faulting process. Half of this energy is transformed into the earthquake and half goes into an increase in locked-in elastic strain. In elastic rebound the locked-in elastic strain drives slip on the fault. In force-driven faulting it stops
APA, Harvard, Vancouver, ISO, and other styles
38

Santos, Rogério Lacerda dos, and Matheus Melo Pithon. "Mechanical evaluation of quad-helix appliance made of low-nickel stainless steel wire." Dental Press Journal of Orthodontics 18, no. 3 (2013): 35–38. http://dx.doi.org/10.1590/s2176-94512013000300007.

Full text
Abstract:
OBJECTIVE: The objective of this study was to test the hypothesis that there is no difference between stainless steel and low-nickel stainless steel wires as regards mechanical behavior. Force, resilience, and elastic modulus produced by Quad-helix appliances made of 0.032-inch and 0.036-inch wires were evaluated. METHODS: Sixty Quad-helix appliances were made, thirty for each type of alloy, being fifteen for each wire thickness, 0.032-in and 0.036-in. All the archwires were submitted to mechanical compression test using an EMIC DL-10000 machine simulating activations of 4, 6, 9, and 12 mm. An
APA, Harvard, Vancouver, ISO, and other styles
39

Streltsov, Dmitry R., Kirill M. Borisov, Aleksandra A. Kalinina, and Aziz M. Muzafarov. "Quantitative Elasticity Mapping of Submicron Silica Hollow Particles by PeakForce QNM AFM Mode." Nanomaterials 13, no. 13 (2023): 1916. http://dx.doi.org/10.3390/nano13131916.

Full text
Abstract:
Silica hollow spheres with a diameter of 100–300 nm and a shell thickness of 8±2 nm were synthesized using a self-templating amphiphilic polymeric precursor, i.e., poly(ethylene glycol)-substituted hyperbranched polyethoxysiloxane. Their elastic properties were addressed with a high-frequency AFM indentation method based on the PeakForce QNM (quantitative nanomechanical mapping) mode enabling simultaneous visualization of the surface morphology and high-resolution mapping of the mechanical properties. The factors affecting the accuracy of the mechanical measurements such as a local slope of th
APA, Harvard, Vancouver, ISO, and other styles
40

Li, Pengfei, Zhihao Yun, Kaihang Gao, Laiqiang Si, and Xinwu Du. "Design and Test of A Force Feedback Seedling Pick-Up Gripper for An Automatic Transplanter." Agriculture 12, no. 11 (2022): 1889. http://dx.doi.org/10.3390/agriculture12111889.

Full text
Abstract:
Aiming at the problems of seedling injury and planting leakage due to the lack of seeding clamping force detection and real-time control in vegetable transplanting, a force feedback gripper was developed based on the linear Hall element. The mechanical properties of the stem of pepper cavity seedlings were first analyzed to provide a basis for the design of the gripper. A linear Hall sensor, a magnet, an elastic actuator, and an Arduino Uno development board make up the grasping force detecting system. Upon picking up a seedling, the elastic actuator, which is connected to the magnet, bends li
APA, Harvard, Vancouver, ISO, and other styles
41

Makoviichuk, M. V., and I. P. Shatskyi. "Bending by concentrated force of thin plate located on elastic foundation and weakened by contact crack." Bulletin of Taras Shevchenko National University of Kyiv. Series: Physics and Mathematics, no. 1 (2019): 118–21. http://dx.doi.org/10.17721/1812-5409.2019/1.27.

Full text
Abstract:
The paper considers the two-dimensional formulation of the problem of the contact interaction of the crack edges in a plate bent by the concentrated force on the elastic Winkler foundation. The crack closure is described using the model of contact along a line in one of the plate surfaces. Within the framework of this model, the boundary value problem is formulated for the equations of the classical theories of plate bending on the elastic foundation and a plane stress state with interrelated tension and bending conditions on the crack line. The obtained boundary value problem has been solved
APA, Harvard, Vancouver, ISO, and other styles
42

Sambataro, Sergio, Salvatore Bocchieri, Luigi Bafumi, Luca Fiorillo, Gabriele Cervino, and Marco Cicciù. "Elastics Selector Gauge as Orthodontics Device Applied to Inter-Maxillary Traction during Malocclusion Correction." Journal of Functional Morphology and Kinesiology 4, no. 3 (2019): 63. http://dx.doi.org/10.3390/jfmk4030063.

Full text
Abstract:
Elastics are the simplest device that can be used during a class correction in orthodontics, and despite the simplicity of a latex band, they are very effective and powerful. The resultant inter-maxillary force affects not only the teeth, but even the mandibular position, and consequently the temporomandibular joints (TMJ). The purpose of our work is to simplify the use of elastics, and to reduce the amount of inventory for orthodontists, because there is a lot of merceology available on the market, and different ways of using the elastics. The use of elastics in clinical practice is based on
APA, Harvard, Vancouver, ISO, and other styles
43

RODE, CHRISTIAN, TOBIAS SIEBERT, WALTER HERZOG, and REINHARD BLICKHAN. "THE EFFECTS OF PARALLEL AND SERIES ELASTIC COMPONENTS ON THE ACTIVE CAT SOLEUS FORCE-LENGTH RELATIONSHIP." Journal of Mechanics in Medicine and Biology 09, no. 01 (2009): 105–22. http://dx.doi.org/10.1142/s0219519409002870.

Full text
Abstract:
Typically, active muscle force is calculated by subtracting measured passive force from measured total force for corresponding whole muscle lengths (standard method). From a mechanical point of view, this requires a parallel elastic component (PEC) that is arranged in parallel to both the series elastic component (SEC) and the contractile component (CC). From a morphological point of view, however, the PEC should be rather in parallel to the CC, and both in series to the SEC (model [CC]). In this study, we investigated the differences in active muscle force estimated with these two different a
APA, Harvard, Vancouver, ISO, and other styles
44

Spector, A. A., and R. C. Batra. "Rolling/Sliding of a Vibrating Elastic Body on an Elastic Substrate." Journal of Tribology 118, no. 1 (1996): 147–52. http://dx.doi.org/10.1115/1.2837070.

Full text
Abstract:
The rolling/sliding in the presence of friction of a vibrating elastic body on an elastic substrate is studied. It is shown that the longitudinal components of the velocity of the center of mass of the body and of the resultant frictional force are not affected by the vibration process. However, the normal vibration of the body influences the slip velocities and the distribution of frictional forces. For the problem of a harmonically oscillating long cylinder rolling/sliding on the flat surface of an elastic substrate, the time histories of the width of the contact zone and the length of adhes
APA, Harvard, Vancouver, ISO, and other styles
45

Stansby, Peter, and Efrain Carpintero Moreno. "Study of Snap Loads for Idealized Mooring Configurations with a Buoy, Inextensible and Elastic Cable Combinations for the Multi-Float M4 Wave Energy Converter." Water 12, no. 10 (2020): 2818. http://dx.doi.org/10.3390/w12102818.

Full text
Abstract:
There has been considerable modelling and wave basin validation of the multi-mode, multi-float, moored wave energy converter M4. The 6 float (2 power take off) (PTO) configuration is considered here with mooring from a buoy with light inextensible cables. Large mean mooring forces and very large peak or snap forces were measured in large waves while the rotational response about the hinges (for power take off in operational conditions) was predominantly linear. Modelling has been extended with elastic mooring cables connected directly to the base of the bow float and to the buoy. The experimen
APA, Harvard, Vancouver, ISO, and other styles
46

Szcześniak, Wacław, and Magdalena Ataman. "The Krylov problem in the case of a beam on Vlasov inertial foundation." AUTOBUSY – Technika, Eksploatacja, Systemy Transportowe 19, no. 6 (2018): 728–36. http://dx.doi.org/10.24136/atest.2018.165.

Full text
Abstract:
The paper deals with vibrations of the elastic beam caused by the moving force traveling with uniform speed. The function defining the pure forced vibrations (aperiodic vibrations) is presented in a closed form. Dynamic deflection of the beam caused by moving force is compared with the static deflection of the beam subjected to the force , and compressed by axial forces . Comparing equations (9) and (13), it can be concluded that the effect on the deflection of the speed of the moving force is the same as that of an additional compressive force . Selected problems of stability of the beam on t
APA, Harvard, Vancouver, ISO, and other styles
47

Kargaudas, Vytautas, and Nerijus Adamukaitis. "PLASTIC DEFORMATIONS OF STEEL FRAME: STATICS AND DYNAMICS." Engineering Structures and Technologies 2, no. 3 (2010): 101–5. http://dx.doi.org/10.3846/skt.2010.14.

Full text
Abstract:
When all deformations of a column are elastic, transverse deflections of the column depend on transverse force and axial displacements depend on axial force only. These classical dependences are unsuitable for elastic-plastic deformations. Plastic deformations develop in columns when steel frame is influenced by extreme action. When a steel column is in the elastic-plastic state, the distribution of elastic and plastic deformations in the cross-section depends on both the bending moment and compressing force. The ideal elastic-plastic material is assumed in this investigation (Prandtl stress –
APA, Harvard, Vancouver, ISO, and other styles
48

Jagannadham, K., and J. Narayan. "Elastic strain energy and forces on point defects in a two-phase medium." Journal of Materials Research 1, no. 1 (1986): 193–201. http://dx.doi.org/10.1557/jmr.1986.0193.

Full text
Abstract:
Elastic strain energy and forces on point defects in a two-phase medium with a planar interface are analyzed employing the surface dislocation analysis developed earlier for three-dimensional distortions. The important field components, namely, the tractions and the displacements arising due to the point source at the interface, are determined. Furthermore, the field components at the interface are used to determine the elastic strain energy associated with the point source in the two-phase medium and the elastic force exerted by the second phase on the point defect. The significance of these
APA, Harvard, Vancouver, ISO, and other styles
49

Turanov, Khabibulla, Yadgor Ruzmetov, and Jamol Shikhnazarov. "Incorrectness of the method of calculating cargo fastening on railway platforms." E3S Web of Conferences 164 (2020): 03040. http://dx.doi.org/10.1051/e3sconf/202016403040.

Full text
Abstract:
Inaccuracy of the existing methodology for calculating cargo fastening. Cargo fastening by flexible and retention elements. The paper should define the “shearing” force across the car as the sum of the transverse transport inertia and wind load, taking into account the safety factor from tipping over; determine the transverse force perceived by the means of securing the load, taking into account the reaction of the retention bars of only one direction; calculate the forces in the elastic fasteners when exposed to shearing forces, taking into account the geometry of the fasteners according to e
APA, Harvard, Vancouver, ISO, and other styles
50

Rafizadeh, H. A. "Complex force-constant dependence of elastic constants." Canadian Journal of Physics 68, no. 1 (1990): 14–22. http://dx.doi.org/10.1139/p90-003.

Full text
Abstract:
Expressions for the inner and bare components of the elastic constants of crystalline solids are derived. The inner elastic constants are complex functions of the force constants and vanish only for centrosymmetric solids. Using a linear-chain model, the force-constant dependence of inner, bare, and total elastic constants is studied. The linear-chain model is also utilized in derivation of composition-dependent elastic constant equations. Single-parameter and two-parameter theoretical calculations are compared with the experimental composition-dependent Young's moduli of a number of metal–met
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!