Books on the topic 'Electric arc furnace'

Smutts-Müller, David. Electric arc furnace steelmaking. [Cambridge]: Hobsons, 1990.

Toulouevski, Yuri N., and Ilyaz Y. Zinurov. Electric Arc Furnace with Flat Bath. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-15886-0.

Office, Energy Efficiency. Automated slag foaming on an electric arc furnace. London: Department of the Environment, 1993.

Sharifi, Masoud. Magnetic field modelling of a Direct Current Electric ARC Furnace. Ottawa: National Library of Canada, 1994.

Kournetas, Nicholas George. The use of oxygen to decrease electrical energy useage in the electric Arc furnace. Ottawa: National Library of Canada, 1998.

Ochs, Thomas L. Waveform analysis of electric furnace arcs as a diagnostic tool. Pittsburgh, Pa: U.S. Dept. of the Interior, Bureau of Mines, 1986.

Arc Furnace Meeting (4th 1985 Budapest, Hungary). 4th Arc Furnace Meeting =: IV Seminar po dugovym elektropecham = 4. Lichtbogenofentagung = 4. Colloque four à arc, 24-27 September, 1985, Budapest, Hungary. Edited by Farkas Sándor, Temesi Sandor, and Metallurgical Engineering Co. (Budapest, Hungary). Budapest, Hungary: OMIKK Technoinform, 1985.

Montgomery, R. W. The use of plasma torches for auxiliary heating in an electric arc furnace. Luxembourg: Commission of the European Communities, 1985.

Mines, United States Bureau of. Utilization of Scrap Preheating and Substitute Slag Conditioners For Electric Arc Furnace Steelmaking. S.l: s.n, 1987.

Toulouevski, Yuri N., and Ilyaz Yunusovich Zinurov. Innovation in Electric Arc Furnaces. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-03802-0.

Toulouevski, Yuri N., and Ilyaz Y. Zinurov. Innovation in Electric Arc Furnaces. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-36273-6.

Hartman, Alan D. Design of an experimental electric arc furnance. Washington, D.C: U.S. Dept. of the Interior, Bureau of Mines, 1992.

King, Paul E. Magnetohydrodynamics in electric arc furance steelmaking. Washington, D.C: U.S. Dept. of the Interior, Bureau of Mines, 1990.

India. Central Pollution Control Board. Comprehensive industry document on electric arc & induction furnaces. New Delhi: Central Pollution Control Board, Ministry of Environment & Forests, 2010.

Toulouevski, Yuri N. Innovation in electric arc furnaces: Scientific basis for selection. Heidelberg: Springer, 2010.

Toulouevski, Yuri N. Innovation in Electric Arc Furnaces: Scientific Basis for Selection. 2nd ed. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013.

Rio, Javier Arturo Del. Analysis of the electric arc stability in AC and DC arc furnaces by using a basis transformed state space approach. Ottawa: National Library of Canada, 1990.

Workshop on Alternative Charge Materials for Electric Arc and Induction Furnaces (1994 Jamshedpur, India). Proceedings of the Workshop on Alternative Charge Materials for Electric Arc and Induction Furnaces, 14-16 December 1994. Jamshedpur: National Metallurgical Laboratory, Council of Scientific & Industrial Research, 1995.

Electric Arc Furnace. Iron & Steel Society, 1990.

The electric arc furnace. london isbn, 1996.

Karbowniczek, Miroslaw. Electric Arc Furnace Steelmaking. Taylor & Francis Group, 2021.

Karbowniczek, Mirosaw. Electric Arc Furnace Steelmaking. Taylor & Francis Group, 2021.

Karbowniczek, Miroslaw. Electric Arc Furnace Steelmaking. Taylor & Francis Group, 2021.

Karbowniczek, Miroslaw. Electric Arc Furnace Steelmaking. CRC Press, 2021.

Karbowniczek, Miroslaw. Electric Arc Furnace Steelmaking. Taylor & Francis Group, 2021.

International Iron and Steel Institute. Committee on Technology., ed. The Electric arc furnace, 1990. Brussels, Belgium: International Iron and Steel Institute, 1990.

United States. Bureau of Mines, ed. Improved arc stability in electric arc furnace steelmaking. [Pittsburgh, PA]: U.S. Dept. of the Interior, Bureau of Mines, 1991.

Toulouevski, Yuri N., and Ilyaz Y. Zinurov. Electric Arc Furnace with Flat Bath: Achievements and Prospects. Springer, 2015.

Toulouevski, Yuri N., and Ilyaz Y. Zinurov. Electric Arc Furnace with Flat Bath: Achievements and Prospects. Springer London, Limited, 2015.

Sue, Chapman Jamie, and Risk Reduction Engineering Laboratory (U.S.), eds. Recycling of electric arc furnace dust: Jorgensen Steel facility : project summary. Cincinnati, OH: U.S. Environmental Protection Agency, Risk Reduction Engineering Laboratory, 1995.

Recycling of electric arc furnace dust: Jorgensen Steel facility : project summary. Cincinnati, OH: U.S. Environmental Protection Agency, Risk Reduction Engineering Laboratory, 1995.

W, Elger G., ed. Utilization of scrap preheating and substitute slag conditioners for electric arc furnace steelmaking. Pittsburgh, Pa: U.S. Dept. of the Interior, Bureau of Mines, 1987.

A Novel sidewall burner on an electric arc furnace: A demostration at Brymbo Steel Works. Energy Efficiency Office, 1991.

National Register of Foreign Collaborations (India) and India. Dept. of Scientific & Industrial Research., eds. Technology in Indian electric arc furnace industry: A status report prepared under the National Register of Foreign Collaborations. New Delhi: Govt. of India, Dept. of Scientific & Industrial Research, Ministry of Science and Technology, 1996.

Evaluation of the three-phase, electric arc melting furnace for treatment of simulated, thermally oxidized radioactive and mixed wastes: (in two parts). [Washington]: U.S. Dept. of the Interior, Bureau of Mines, 1996.

George, Harry, and Iron and Steel Society, eds. Electrode use in electric arc furnaces. Warrendale, PA: Iron and Steel Society, 1986.

Sadeghian, Alireza. Adaptive neuro-fuzzy modeling of electric arc furnaces. 2001.

Toulouevski, Yuri N. N., and Ilyaz Y. Zinurov. Innovation in Electric Arc Furnaces: Scientific Basis for Selection. Springer, 2015.

Toulouevski, Yuri N., and Ilyaz Y. Zinurov. Innovation in Electric Arc Furnaces: Scientific Basis for Selection. Springer, 2010.

Toulouevski, Yuri N., and Ilyaz Y. Zinurov. Innovation in Electric Arc Furnaces: Scientific Basis for Selection. Springer, 2013.

King, Paul E. Electro-magneto-hydrodynamics: The processes of electric arc steelmaking. 1988.

King, Paul E. Electro-magneto-hydrodynamics: The processes of electric arc steelmaking. 1988.