Log in

Relevant bibliographies by topics / Electric power distribution system

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Electric power distribution system'

Author: Grafiati

Published: 4 June 2021

Last updated: 7 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Electric power distribution system.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Electric power distribution system"

1

Mustafa, Sameer, Mohammed Yasen, and Hussein Abdullah. "Evaluation of Electric Energy Losses in Kirkuk Distribution Electric System Area." Iraqi Journal for Electrical and Electronic Engineering 7, no. 2 (December 1, 2011): 144–50. http://dx.doi.org/10.37917/ijeee.7.2.10.

Full text

Abstract:

Correct calculations of losses are important for several reasons. There are two basic methods that can be used to calculate technical energy losses, a method based on subtraction of metered energy purchased and metered energy sold to customers and a method based on modeling losses in individual components of the system. For considering the technical loss in distribution system included: transmission line losses, power transformer losses, distribution line losses and low-voltage transformer losses. This work presents an evaluation of the power losses in Kirkuk electric distribution system area and submit proposals and appropriate solutions and suggestions to reduce the losses. A program under Visual Basic was designed to calculate and evaluate electrical energy losses in electrical power systems.

APA, Harvard, Vancouver, ISO, and other styles

2

Anteneh, Degarege. "Reliability Assessment of Distribution System Using Analytical Method: A Case Study of Debre Berhan Distribution Network." Journal of Informatics Electrical and Electronics Engineering (JIEEE) 1, no. 1 (April 25, 2020): 1–9. http://dx.doi.org/10.54060/jieee/001.01.002.

Full text

Abstract:

Electric power delivers a predicable per condition for the technological, economic and political development of any countries and it is vital for each individual. Power outage is serious problem in Ethiopia at the whole of distribution network. This is due to most interruptions are frequently and much time service restoration, that is why most customers of Ethiopia their day to day activities highly affected and they are strongly complain to Ethiopia electric utility. But this power outage affected the cost of customer and Ethiopian utility. Power system is to provide an adequate and security electrical addressing to its demands as economically as alternative with reasonable level of reliability. Most electrical power distribution system reliability is one of the major issues for the demands. Reliability is the chance that a network or components done their assigned task for a given period of time under the working time stumbled upon during its anticipated lifetime. Most of developing country including Ethiopia electric power distribution network has received considerably less of the attention to reliability designing and evaluation than have generating and transmitting systems. Now a day life is directly or indirectly depends on electric power so that utility should deliver reliable power every day for 24 hours and each year for 8760 hours to satisfy human needs and to perform their works as much as possible with less economy.

APA, Harvard, Vancouver, ISO, and other styles

3

Meinecke, Steffen, Leon Thurner, and Martin Braun. "Review of Steady-State Electric Power Distribution System Datasets." Energies 13, no. 18 (September 15, 2020): 4826. http://dx.doi.org/10.3390/en13184826.

Full text

Abstract:

Publicly available grid datasets with electric steady-state equivalent circuit models are crucial for the development and comparison of a variety of power system simulation tools and algorithms. Such algorithms are essential to analyze and improve the integration of distributed energy resources (DERs) in electrical power systems. Increased penetration of DERs, new technologies, and changing regulatory frameworks require the continuous development of the grid infrastructure. As a result, the number and versatility of grid datasets, which are required in power system research, increases. Furthermore, the used grids are created by different methods and intentions. This paper gives orientation within these developments: First, a concise overview of well-known, publicly available grid datasets is provided. Second, background information on the compilation of the grid datasets, including different methods, intentions and data origins, is reviewed and characterized. Third, common terms to describe electric steady-state distribution grids, such as representative grid or benchmark grid, are assembled and reviewed. Recommendations for the use of these grid terms are made.

APA, Harvard, Vancouver, ISO, and other styles

4

Olajuyin, E. A., and Olubakinde Eniola. "MICROGRID IN POWER DISTRIBUTION SYSTEM." International Journal of Research -GRANTHAALAYAH 7, no. 8 (July 23, 2020): 387–93. http://dx.doi.org/10.29121/granthaalayah.v7.i8.2019.687.

Full text

Abstract:

Power is a very important instrument to the development of economy of a nation and it must be stable and available and to meet the demand of the consumers at all times. The quest for power supply has introduced a new technology called microgrid. Micro grids are regarded as small power systems that confine electric energy generating facilities, from both renewable energy sources and conventional synchronous. Generators, and customer loads with respect to produced electric energy. It can be connected to grid or operate in islanding mode. On the other hand, the grid’s dynamics and its stability rely on the amount of stored energy in the micro grid. In a conventional power system with a large number of synchronous generators as the main sources of energy, the mechanical energy in the generators’ rotors, in the form of kinetic energy, serves as the stored energy and feeds the grids in the event of any drastic load changes or if disturbances occur. Microgrid is an alternative idea to support the grid, it can be applied in a street, estates, community or a locality (towns and villages), organizations and establishments. Load forecasting can be further extended to Organizations, Local Government, State and country to determine the energy consumption.

APA, Harvard, Vancouver, ISO, and other styles

5

Davidson, Rachel A., Haibin Liu, Isaac K. Sarpong, Peter Sparks, and David V. Rosowsky. "Electric Power Distribution System Performance in Carolina Hurricanes." Natural Hazards Review 4, no. 1 (February 2003): 36–45. http://dx.doi.org/10.1061/(asce)1527-6988(2003)4:1(36).

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Valerio, Antonio. "Visualization System Integrated for Electric Power Distribution Networks." IEEE Latin America Transactions 8, no. 6 (December 2010): 728–33. http://dx.doi.org/10.1109/tla.2010.5688102.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Chamoso, Pablo, Fernando De La Prieta, and Gabriel Villarrubia. "Intelligent system to control electric power distribution networks." ADCAIJ: Advances in Distributed Computing and Artificial Intelligence Journal 4, no. 4 (December 22, 2015): 1–8. http://dx.doi.org/10.14201/adcaij20154418.

Full text

Abstract:

The use of high voltage power lines transport involves some risks that may be avoided with periodic reviews as imposed by law in most countries. The objective of this work is to reduce the number of these periodic reviews so that the maintenance cost of power lines is also reduced. To reduce the number of transmission towers (TT) to be reviewed, a virtual organization (VO) based system of agents is proposed in conjunction with different artificial intelligence methods and algorithms. This system is able to propose a sample of TT from a selected set to be reviewed and to ensure that the whole set will have similar values without needing to review all the TT. As a result, the system provides a software solution to manage all the review processes and all the TT of Spain, allowing the review companies to use the application either when they initiate a new review process for a whole line or area of TT, or when they want to place an entirely new set of TT, in which case the system would recommend the best place and the best type of structure to use.

APA, Harvard, Vancouver, ISO, and other styles

8

Xu, Sheng You, Min You Chen, Neal Wade, and Ran Li. "Reliability Evaluation of Electric Power System Containing Distribution Generation." Advanced Materials Research 383-390 (November 2011): 3472–78. http://dx.doi.org/10.4028/www.scientific.net/amr.383-390.3472.

Full text

Abstract:

The application of renewable energy in electric power system is growing rapidly due to enhanced public concerns for adverse environmental impacts and escalation in energy costs associated with the use of conventional energy sources, distribution generation (DG) is recognized as an encouraging and cost effective generation source both in large grid connected systems and small isolated applications. Power output from distribution generation is not readily controllable. High distribution generation penetration can lead to high-risk levels in power system reliability and stability. In order to maintain the system reliability and stability, this paper presents a probabilistic evaluation method that can incorporate the impacts on reliability of new energy utilization in electric power systems. Two procedures designated as equivalent simplifying method and the islanded reliability calculating method are proposed and discussed. In the equivalent simplifying method, the equivalent failure rate and failure during time for a given system at a specified reliability level is determined using system equivalent simplifying. In the islanded probability calculating method, the islanded probability at a load point for a given system containing distribution generation is calculated. The analysis results of example show that the probabilistic evaluation method is feasible for the operator to decide the appreciate capability and detailed location of possible distribution generation in electric power systems, and consequently a desired level of reliability is obtained.

APA, Harvard, Vancouver, ISO, and other styles

9

Kim, H., Y. Ko, and S. Shon. "An Expert System for the Electric Power Distribution System Design." IFAC Proceedings Volumes 22, no. 9 (August 1989): 483–88. http://dx.doi.org/10.1016/s1474-6670(17)53317-0.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Diamenu, Godwin. "Statistical Analysis of Electric Power Distribution Grid Outages." European Journal of Engineering and Technology Research 6, no. 3 (April 12, 2021): 27–33. http://dx.doi.org/10.24018/ejers.2021.6.3.2406.

Full text

Abstract:

Power systems in general supply consumers with electrical energy as economically and reliably as possible. Reliable electric power systems serve customer loads without interruptions in supply voltage. Electric power generation facilities must produce enough power to meet customer demand. Electrical energy produced and delivered to customers through generation, transmission and distribution systems, constitutes one of the largest consumers markets the world over. The benefits of electric power systems are integrated into the much faster modern life in such extent that it is impossible to imagine the society without the electrical energy. The rapid growth of electric power distribution grids over the past few decades has resulted in a large increment in the number of grid lines in operation and their total length. These grid lines are exposed to faults as a result of lightning, short circuits, faulty equipment, mis-operation, human errors, overload, and aging among others. A fault implies any abnormal condition which causes a reduction in the basic insulation strength between phase conductors or phase conductors and earth, or any earthed screens surrounding the conductors. In this paper, different types of faults that affected the electric power distribution grid of selected operational districts of Electricity Company of Ghana (ECG) in the Western region of Ghana was analyzed and the results presented. Outages due to bad weather and load shedding contributed significantly to the unplanned outages that occurred in the medium voltage (MV) distribution grid. Blown fuse and loose contact faults were the major contributor to unplanned outages in the low voltage (LV) electric power distribution grid.

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Electric power distribution system"

1

Fletcher, Robert Henry. "Optimal distribution system horizon planning /." Thesis, Connect to this title online; UW restricted, 2007. http://hdl.handle.net/1773/6018.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Javanshir, Marjan. "DC distribution system for data center." Thesis, Click to view the E-thesis via HKUTO, 2007. http://sunzi.lib.hku.hk/hkuto/record/B39344952.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Ozel, Kerem. "Losses In Electric Distribution System." Master's thesis, METU, 2006. http://etd.lib.metu.edu.tr/upload/2/12607916/index.pdf.

Full text

Abstract:

The purpose of this thesis is to examine the technical losses in Electric Distribution Systems, the sources of the losses, minimum levels of the losses, ways to decrease the losses and current applications in Turkey. The wrong and weak parts of the current applications are determined and emphasized. Ways to decrease losses in Distribution Systems are advised. The energy resources in the world are decreasing rapidly. There is a rapid growth in consumption. It is a must to use existing resources in most efficient way because there is no unlimited energy source. Losses in the electric distribution systems are one of the most important subjects because the most of the technical losses in electric systems occur in the distribution systems.

APA, Harvard, Vancouver, ISO, and other styles

4

Yu, Xuebei. "Distribution system reliability enhancement." Thesis, Georgia Institute of Technology, 2011. http://hdl.handle.net/1853/41091.

Full text

Abstract:

Practically all everyday life tasks from economic transactions to entertainment depend on the availability of electricity. Some customers have come to expect a higher level of power quality and availability from their electric utility. Federal and state standards are now mandated for power service quality and utilities may be penalized if the number of interruptions exceeds the mandated standards. In order to meet the requirement for safety, reliability and quality of supply in distribution system, adaptive relaying and optimal network reconfiguration are proposed. By optimizing the system to be better prepared to handle a fault, the end result will be that in the event of a fault, the minimum number of customers will be affected. Thus reliability will increase. The main function of power system protection is to detect and remove the faulted parts as fast and as selectively as possible. The problem of coordinating protective relays in electric power systems consists of selecting suitable settings such that their fundamental protective function is met under the requirements of sensitivity, selectivity, reliability, and speed. In the proposed adaptive relaying approach, weather data will be incorporated as follows. By using real-time weather information, the potential area that might be affected by the severe weather will be determined. An algorithm is proposed for adaptive optimal relay setting (relays will optimally react to a potential fault). Different types of relays (and relay functions) and fuses will be considered in this optimization problem as well as their coordination with others. The proposed optimization method is based on mixed integer programming that will provide the optimal relay settings including pickup current, time dial setting, and different relay functions and so on. The main function of optimal network reconfiguration is to maximize the power supply using existing breakers and switches in the system. The ability to quickly and flexibly reconfigure the power system of an interconnected network of feeders is a key component of Smart Grid. New technologies are being injected into the distribution systems such as advanced metering, distribution automation, distribution generation and distributed storage. With these new technologies, the optimal network reconfiguration becomes more complicated. The proposed algorithms will be implemented and demonstrated on a realistic test system. The end result will be improved reliability. The improvements will be quantified with reliability indexes such as SAIDI.

APA, Harvard, Vancouver, ISO, and other styles

5

Yang, Xiaoguang Miu Karen Nan. "Unbalanced power converter modeling for AC/DC power distribution systems /." Philadelphia, Pa. : Drexel University, 2006. http://hdl.handle.net/1860/1231.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

McDermott, Thomas E. "A Heuristic Nonlinear Constructive Method for Electric Power Distribution System Reconfiguration." Diss., Virginia Tech, 1998. http://hdl.handle.net/10919/30447.

Full text

Abstract:

The electric power distribution system usually operates a radial configuration, with tie switches between circuits to provide alternate feeds. The losses would be minimized if all switches were closed, but this is not done because it complicates the system's protection against overcurrents. Whenever a component fails, some of the switches must be operated to restore power to as many customers as possible. As loads vary with time, switch operations may reduce losses in the system. Both of these are applications for reconfiguration. The problem is combinatorial, which precludes algorithms that guarantee a global optimum. Most existing reconfiguration algorithms fall into two categories. In the first, branch exchange, the system operates in a feasible radial configuration and the algorithm opens and closes candidate switches in pairs. In the second, loop cutting, the system is completely meshed and the algorithm opens candidate switches to reach a feasible radial configuration. Reconfiguration algorithms based on linearized transshipment, neural networks, heuristics, genetic algorithms, and simulated annealing have also been reported, but not widely used. These existing reconfiguration algorithms work with a simplified model of the power system, and they handle voltage and current constraints approximately, if at all. The algorithm described here is a constructive method, using a full nonlinear power system model that accurately handles constraints. The system starts with all switches open and all failed components isolated. An optional network power flow provides a lower bound on the losses. Then the algorithm closes one switch at a time to minimize the increase in a merit figure, which is the real loss divided by the apparent load served. The merit figure increases with each switch closing. This principle, called discrete ascent optimal programming (DAOP), has been applied to other power system problems, including economic dispatch and phase balancing. For reconfiguration, the DAOP method's greedy nature is mitigated with a backtracking algorithm. Approximate screening formulas have also been developed for efficient use with partial load flow solutions. This method's main advantage is the accurate treatment of voltage and current constraints, including the effect of control action. One example taken from the literature shows how the DAOP-based algorithm can reach an optimal solution, while adjusting line voltage regulators to satisfy the voltage constraints.
Ph. D.

APA, Harvard, Vancouver, ISO, and other styles

7

Arunachalam, Suresh. "Expansion of an existing power system - a study." Diss., Rolla, Mo. : University of Missouri--Rolla, 1989. http://scholarsmine.mst.edu/thesis/pdf/Arunachalam_09007dcc805881ce.pdf.

Full text

Abstract:

Thesis (M.S.)--University of Missouri--Rolla, 1989.
Vita. The entire thesis text is included in file. Title from title screen of thesis/dissertation PDF file (viewed October 7, 2008) Includes bibliographical references (p. 89).

APA, Harvard, Vancouver, ISO, and other styles

8

Tong, Shiqiong Miu Karen Nan. "Slack bus modeling for distributed generation and its impacts on distribution system analysis, operation and planning /." Philadelphia, Pa. : Drexel University, 2006. http://hdl.handle.net/1860/1229.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Fallier, William F. "Analysis of system wide distortion in an integrated power system utilizing a high voltage DC bus and silicon carbide power devices." Thesis, Monterey, California. Naval Postgraduate School, 2007. http://hdl.handle.net/10945/3006.

Full text

Abstract:

This research investigates the distortion on the electrical distribution system for a high voltage DC Integrated Power System (IPS). The analysis was concentrated on the power supplied to a propulsion motor driven by an inverter with simulated silicon carbide switches. Theoretically, silicon carbide switches have the advantage of being able to withstand a very large blocking voltage and carry very large forward currents. Silicon carbide switches are also very efficient due to their quick rise and fall times. Since silicon carbide switches can withstand high voltage differentials and switch faster than silicon switches, the switching effects on the electrical distribution system were investigated. The current state of silicon carbide power electronics was also investigated. This research quantifies the current and voltage distortion over various operating conditions. A system model was developed using Matlab, Simulink, and SimPowerSystems. The model consisted of a synchronous generator supplying a rectifier and inverter set driving an induction motor. This induction motor simulates the propulsion motor for a Navy ship. This model had a DC link voltage of 10 kV in order to simulate future Navy IPS systems. The current and voltage distortion were compared to MIL STD 1399 and IEEE STD 519 and 45.
Contract Number: N62271-97-G-0026

APA, Harvard, Vancouver, ISO, and other styles

10

Khaliq, Abdul. "Preventive control for the attainment of a dynamically secure power system." Diss., Georgia Institute of Technology, 1995. http://hdl.handle.net/1853/13893.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Electric power distribution system"

1

Electric power distribution system engineering. New York: McGraw-Hill, 1986.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Gonen, Turan. Electric power distribution system engineering. New York: McGraw-Hill, 1986.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Gönen, Turan. Electric power distribution system engineering. 2nd ed. Boca Raton: Taylor & Francis, 2007.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

D, Stevenson William, and Stevenson William D, eds. Power system analysis. New York: McGraw-Hill, 1994.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Electric distribution systems. Hoboken, N.J: Wiley-IEEE Press, 2010.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Schavemaker, Pieter. Electrical power system essentials. Chichester, West Sussex, England: Wiley, 2008.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Schavemaker, Pieter. Electrical power system essentials. Chichester, West Sussex, England: Wiley, 2008.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Patrick, Dale R. Electrical distribution systems. Lilburn, GA: Fairmont Press, 1999.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

W, Fardo Stephen, ed. Electrical distribution systems. 2nd ed. Lilburn, GA: Fairmont Press, 2008.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Chowdhury, Ali A., and Ali A. Chowdhury. Power distribution system reliability: Practical methods and applications. Hoboken: John Wiley & Sons, 2009.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Electric power distribution system"

1

Billinton, Roy, and Ronald N. Allan. "Distribution System Adequacy Evaluation." In Reliability Assessment of Large Electric Power Systems, 147–82. Boston, MA: Springer US, 1988. http://dx.doi.org/10.1007/978-1-4613-1689-3_4.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Arasteh, H., S. Bahramara, Z. Kaheh, S. M. Hashemi, V. Vahidinasab, P. Siano, and M. S. Sepasian. "A System-of-Systems Planning Platform for Enabling Flexibility Provision at Distribution Level." In Flexibility in Electric Power Distribution Networks, 41–65. Boca Raton: CRC Press, 2021. http://dx.doi.org/10.1201/9781003122326-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Jin, Xiaolong, Saeed Teimourzadeh, Osman Bulent Tor, and Qiuwei Wu. "Three-Layer Aggregator Solutions to Facilitate Distribution System Flexibility." In Flexibility in Electric Power Distribution Networks, 175–206. Boca Raton: CRC Press, 2021. http://dx.doi.org/10.1201/9781003122326-8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Zhao, Bo. "Application of Electric Power Automation System Based on Power Distribution Network." In Advances in Intelligent Systems and Computing, 1017–25. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-31129-2_95.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Billinton, Roy, and Wenyuan Li. "Distribution System and Station Adequacy Assessment." In Reliability Assessment of Electric Power Systems Using Monte Carlo Methods, 209–54. Boston, MA: Springer US, 1994. http://dx.doi.org/10.1007/978-1-4899-1346-3_6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Mahdavi, Meisam, Pierluigi Siano, and Hassan Haes Alhelou. "Optimization Techniques for Reconfiguration of Energy Distribution Systems." In Flexibility in Electric Power Distribution Networks, 299–345. Boca Raton: CRC Press, 2021. http://dx.doi.org/10.1201/9781003122326-13.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Kavousi-Fard, Abdollah, Mojtaba Mohammadi, and A. S. Al-Sumaiti. "Effective Strategies of Flexibility in Modern Distribution Systems." In Flexibility in Electric Power Distribution Networks, 95–119. Boca Raton: CRC Press, 2021. http://dx.doi.org/10.1201/9781003122326-5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Haughton, Daniel A., and Gerald T. Heydt. "Synchronous Measurements in Power Distribution Systems." In Control and Optimization Methods for Electric Smart Grids, 295–312. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4614-1605-0_15.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Rigatos, Gerasimos. "Condition Monitoring of the Electric Power Transmission and Distribution System." In Intelligent Renewable Energy Systems, 463–505. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-39156-4_10.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Yu, Lei, Trillion Q. Zheng, Deying Yi, Zhiyong Li, and Cheng’an Wan. "The Space Distributed Power System: Power Generation, Power Distribution and Power Conversion." In Lecture Notes in Electrical Engineering, 427–38. Cham: Springer International Publishing, 2013. http://dx.doi.org/10.1007/978-3-319-01273-5_47.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Electric power distribution system"

1

Burk, Calib A., Juan L. Bala, and John Z. Gibson. "Electric Secondary Distribution System Design." In 2007 39th North American Power Symposium. IEEE, 2007. http://dx.doi.org/10.1109/naps.2007.4402369.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Gandhi, Karan, and Hari Om Bansal. "Smart Metering in electric power distribution system." In 2013 International Conference on Control, Automation, Robotics and Embedded Systems (CARE). IEEE, 2013. http://dx.doi.org/10.1109/care.2013.6733756.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Chen, Xia, Xinru Wang, Jinying Li, Di Wang, and Yang Gao. "Power Distribution Strategy for Electric Vehicle Hybrid Power System." In Proceedings of the 3rd International Conference on Mechatronics Engineering and Information Technology (ICMEIT 2019). Paris, France: Atlantis Press, 2019. http://dx.doi.org/10.2991/icmeit-19.2019.116.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Aliyari, Mostafa, Vahid Baghshani, and Abass Barabadi. "Reliability performance analysis in power distribution system using Weibull distribution-A case study." In 18th Electric Power Distribution Network Conference. IEEE, 2013. http://dx.doi.org/10.1109/epdc.2013.6565967.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Samotyj, M., and B. Howe. "Creating tomorrow's intelligent electric power delivery system." In 18th International Conference and Exhibition on Electricity Distribution (CIRED 2005). IEE, 2005. http://dx.doi.org/10.1049/cp:20051311.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Liwen, Wang, Shi Xinhong, Yang Zhenglin, Shi Fei, and Wang Xiaoli. "The impact of electric power system reform on power dispatching institution." In 2016 China International Conference on Electricity Distribution (CICED). IEEE, 2016. http://dx.doi.org/10.1109/ciced.2016.7576229.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Jiong-Cong, Chen, Zhang Dao-Jie, and Gao Xin-Hua. "Research of beidou system in electric power system time service." In 2008 China International Conference on Electricity Distribution (CICED 2008). IEEE, 2008. http://dx.doi.org/10.1109/ciced.2008.5211710.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Roveto, Matt, and Yury Dvorkin. "Market Power in Electric Power Distribution Systems." In 2019 North American Power Symposium (NAPS). IEEE, 2019. http://dx.doi.org/10.1109/naps46351.2019.9000388.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Heydari-Doostabad, Hamed, Reza Keypour, Naser Eskandarian, and Mohammadreza Khalghani. "New fuzzy control system design for maximum power point tracking of wind turbine." In 18th Electric Power Distribution Network Conference. IEEE, 2013. http://dx.doi.org/10.1109/epdc.2013.6565957.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Amiriounl, Mohammad Hassan, Alireza Amiryoon, and Ahad Kazemi. "Optimal planning of a hybrid residential energy system under the smart home's outline." In 18th Electric Power Distribution Network Conference. IEEE, 2013. http://dx.doi.org/10.1109/epdc.2013.6565960.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Electric power distribution system"

1

Bass, Robert, and Nicole Zimmerman. Impacts of Electric Vehicle Charging on Electric Power Distribution Systems. Portland State University Library, September 2013. http://dx.doi.org/10.15760/trec.145.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Barnes, P. R. The Integration of Renewable Energy Sources into Electric Power Distribution Systems. Office of Scientific and Technical Information (OSTI), January 1994. http://dx.doi.org/10.2172/814204.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Gerkensmeyer, Clint, Michael CW Kintner-Meyer, and John G. DeSteese. Technical Challenges of Plug-In Hybrid Electric Vehicles and Impacts to the US Power System: Distribution System Analysis. Office of Scientific and Technical Information (OSTI), January 2010. http://dx.doi.org/10.2172/974954.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Filarowski, C. A. An automated system for studying the power distribution of electron beams. Office of Scientific and Technical Information (OSTI), December 1994. http://dx.doi.org/10.2172/96635.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Barnes, P. R., J. W. Van Dyke, F. M. Tesche, and H. W. Zaininger. The integration of renewable energy sources into electric power distribution systems. Volume 1: National assessment. Office of Scientific and Technical Information (OSTI), June 1994. http://dx.doi.org/10.2172/10171039.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

N. Ramirez. RELIABILITY ANALYSIS OF THE ELECTRICAL POWER DISTRIBUTION SYSTEM TO SELECTED PORTIONS OF THE NUCLEAR HVAC SYSTEM. Office of Scientific and Technical Information (OSTI), December 2004. http://dx.doi.org/10.2172/841283.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Sharifnia, Hamidreza. Safety related model and studies of Trojan Nuclear Power Plant electrical distribution system. Portland State University Library, January 2000. http://dx.doi.org/10.15760/etd.5758.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Zaininger, H. W. The Integration of Renewable Energy Sources into Electric Power Distribution Systems, Vol. II Utility Case Assessments. Office of Scientific and Technical Information (OSTI), January 1994. http://dx.doi.org/10.2172/814519.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Zaininger, H. W., P. R. Ellis, and J. C. Schaefer. The integration of renewable energy sources into electric power distribution systems. Volume 2, Utility case assessments. Office of Scientific and Technical Information (OSTI), June 1994. http://dx.doi.org/10.2172/10170818.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Glass, Jim, Alexander M. Melin, Michael R. Starke, and Ben Ollis. Chattanooga Electric Power Board Case Study Distribution Automation. Office of Scientific and Technical Information (OSTI), October 2016. http://dx.doi.org/10.2172/1329733.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!