Log in

Relevant bibliographies by topics / Electrical and dielectric properties

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Electrical and dielectric properties'

Author: Grafiati

Published: 4 June 2021

Last updated: 4 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Electrical and dielectric properties.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Electrical and dielectric properties"

1

Shabgard, Mohammad Reza, Hossein Faraji, Behnam Khosrozade, Hadi Eivazi-Bagheri, and Keivan Amini. "Study the Effects of Dielectric Type on the Machining Characteristics of γ-Ti Al in Electrical Discharge Machining." International Journal of Engineering Research in Africa 33 (November 2017): 40–49. http://dx.doi.org/10.4028/www.scientific.net/jera.33.40.

Full text

Abstract:

The current study surveys the results of using deionized water and kerosene as dielectrics in the machining outputs of γ-TiAl intermetallic compound obtained in electric discharge machining. Influences of these different dielectrics properties on machining speed, tool wear, surface cracks and roughness were compared. Scanning electron microscopy micrographs were prepared to investigate influences of dielectrics on the surface characteristics of electrically discharged samples. Results indicate which by kerosene dielectric; the material removal rate (MRR) is further compared to another one. But deionized water as dielectric causes higher tool wear ratio than kerosene dielectric. Electrical discharged samples in deionized water have higher surface roughness, in addition it contains surface cracks, whereas kerosene dielectric results better surface finish in low pulse current. According to XRD spectra electric discharge machining in deionized water and kerosene dielectrics produces Ti3 Al intermetallic compound on the produced surface.

APA, Harvard, Vancouver, ISO, and other styles

2

Novák, Ján, and Ivan Vitázek. "Electrical Properties of Sunflower Achenes." Acta Technologica Agriculturae 17, no. 4 (December 1, 2014): 109–13. http://dx.doi.org/10.2478/ata-2014-0025.

Full text

Abstract:

Abstract This work contains the results of measuring the electrical properties of sunflower achenes. The interest in electrical properties of biological materials resulted in engineering research in this field. The results of measurements are used for determining the moisture content, the surface level of liquid and grainy materials, for controlling the presence of pests in grain storage, for the quantitative determination of mechanical damage, in the application of dielectric heating, and in many other areas. Electrical measurements of these materials are of fundamental importance in relation to the analysis of quantity of absorbed water and dielectric heating characteristics. It is a well-known fact that electrical properties of materials, namely dielectric constant and conductivity, are affected by the moisture content of material. This fact is important for the design of many commercial moisturetesting instruments for agricultural products. The knowledge of dielectric properties of materials is necessary for the application of dielectric heating. The aim of this work was to measure conductivity, dielectric constant and loss tangent on samples of sunflower achenes, the electrical properties of which had not been sufficiently measured. Measurements were performed under variable moisture content and the frequency of electric field ranging from 1 MHz to 16 MHz, using a Q meter with coaxial probe. It was concluded that conductivity, dielectric constant and loss tangent increased with increasing moisture content, and dielectric constant and loss tangent decreased as the frequency of electric field increased.

APA, Harvard, Vancouver, ISO, and other styles

3

Ussenov, Y. A., T. S. Ramazanov, M. T. Gabdullin, M. K. Dosbolayev, and T. T. Daniyarov. "Investigation of electrical and optical properties of dielectric barrier discharge." Physical Sciences and Technology 2, no. 1 (2015): 9–12. http://dx.doi.org/10.26577/2409-6121-2015-2-1-9-12.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Debnath, S., Prajna P. De, and D. Khastgir. "Ambient Electrical Properties of Mica-Styrene-Butadiene Rubber Composites." Rubber Chemistry and Technology 61, no. 4 (September 1, 1988): 555–67. http://dx.doi.org/10.5254/1.3536202.

Full text

Abstract:

Abstract We have studied the effect of addition of (a) mica, (b) silane coupling agent, and (c) silane-treated mica on the ambient dielectric properties of vulcanized styrene-butadiene rubber. It is observed that both dielectric constant and dielectric loss increase as mica, silane, and silane-treated mica are added. The increase is more pronounced in the case of silane-treated mica than for the untreated mica systems. The observed values of dielectric constants are in close agreement with the calculated ones obtained from different theories of heterogeneous dielectrics. Dielectric strength shows an increasing trend in the presence of mica. At higher mica loading, D.C. conductivity decreases slightly.

APA, Harvard, Vancouver, ISO, and other styles

5

Min, Daomin, Chenyu Yan, Rui Mi, Chao Ma, Yin Huang, Shengtao Li, Qingzhou Wu, and Zhaoliang Xing. "Carrier Transport and Molecular Displacement Modulated dc Electrical Breakdown of Polypropylene Nanocomposites." Polymers 10, no. 11 (October 30, 2018): 1207. http://dx.doi.org/10.3390/polym10111207.

Full text

Abstract:

Dielectric energy storage capacitors have advantages such as ultra-high power density, extremely fast charge and discharge speed, long service lifespan and are significant for pulsed power system, smart power grid, and power electronics. Polypropylene (PP) is one of the most widely used dielectric materials for dielectric energy storage capacitors. It is of interest to investigate how to improve its electrical breakdown strength by nanodoping and the influencing mechanism of nanodoping on the electrical breakdown properties of polymer nanocomposites. PP/Al2O3 nanocomposite dielectric materials with various weight fraction of nanoparticles are fabricated by melt-blending and hot-pressing methods. Thermally stimulated current, surface potential decay, and dc electrical breakdown experiments show that deep trap properties and associated molecular chain motion are changed by incorporating nanofillers into polymer matrix, resulting in the variations in conductivity and dc electrical breakdown field of nanocomposite dielectrics. Then, a charge transport and molecular displacement modulated electrical breakdown model is utilized to simulate the dc electrical breakdown behavior. It is found that isolated interfacial regions formed in nanocomposite dielectrics at relatively low loadings reduce the effective carrier mobility and strengthen the interaction between molecular chains, hindering the transport of charges and the displacement of molecular chains with occupied deep traps. Accordingly, the electrical breakdown strength is enhanced at relatively low loadings. Interfacial regions may overlap in nanocomposite dielectrics at relatively high loadings so that the effective carrier mobility decreases and the interaction between molecular chains may be weakened. Consequently, the molecular motion is accelerated by electric force, leading to the decrease in electrical breakdown strength. The experiments and simulations reveals that the influence of nanodoping on dc electrical breakdown properties may origin from the changes in the charge transport and molecular displacement characteristics caused by interfacial regions in nanocomposite dielectrics.

APA, Harvard, Vancouver, ISO, and other styles

6

Novák, Ján. "Electrical Prope Rties of Popcorn Grains." Acta Technologica Agriculturae 16, no. 2 (June 1, 2013): 43–46. http://dx.doi.org/10.2478/ata-2013-0011.

Full text

Abstract:

Abstract This work contains the results of measuring the electrical properties of popcorn grains. Interest in electrical properties of biological materials resulted in engineering research in this field. The results of measurements are used for determining the moisture content, the surface level of liquid and grainy materials, for controlling the presence of pests in grain storage, for a quantitative determination of mechanical damage, in applications of dielectric heating, and in many other cases. Electrical measurements on these materials are of fundamental importance in relation to the analysis of quantity of absorbed water and dielectric heating characteristics. It is a well-known fact that electrical properties of materials, namely dielectric constant and conductivity, are affected by the moisture content of material. This fact is important for the design of many commercial moisture-testing instruments for agricultural products. The knowledge of dielectric properties of materials is necessary for the application of dielectric heating. The aim of this work was to perform the measurements of conductivity, dielectric constant and loss tangent on samples of popcorn grains, the electrical properties of which had not been sufficiently measured. Measurements were performed under variable moisture content and the frequency of electric field in the range from 1 MHz to 16 MHz, using a Q meter with a coaxial probe. It was concluded that conductivity, dielectric constant and loss tangent increased with increase of moisture content, and dielectric constant and loss factor decreased as the frequency of electric field increased.

APA, Harvard, Vancouver, ISO, and other styles

7

Toman, Manar S., and Sameer Hassan Al-nesrawy. "New Fabrication (PVA-CMC -PbO) Nanocomposites Structural and Electrical Properties." NeuroQuantology 19, no. 4 (May 18, 2021): 38–46. http://dx.doi.org/10.14704/nq.2021.19.4.nq21035.

Full text

Abstract:

This paper presents the work conducted on preparing (PbO PVA-PEG) nanocomposites through adding the different weight concentrations of lead oxide (0,1,3,5,7 wt%). The structural aspects such as optical microscope, FTIR and electrical features of nanocomposites (PVA-CMC/PbO) were examined. The resulting data shows that the dielectric constant decreased along with the decline of dielectric loss, whereas the frequency value rose while applying of an electric field. As for the electrical conductivity AC, the dielectric loss and dielectric constant of all samples rose along with the increase in lead oxide concentration.

APA, Harvard, Vancouver, ISO, and other styles

8

Peng, Cheng, Yefeng Feng, and Jianbing Hu. "Enhancing High-Frequency Dielectric Properties of Beta-SiC Filled Nanocomposites from Synergy between Percolation and Polarization." Materials 11, no. 9 (September 13, 2018): 1699. http://dx.doi.org/10.3390/ma11091699.

Full text

Abstract:

Promising comprehensive properties, including high permittivity, low dielectric loss, high breakdown strength, low electrical conductivity, and high thermal conductivity, are very hard to simultaneously obtain in high-frequency applicable polymer nanocomposite dielectrics. Instead of traditional electric percolation, in this work, a novel route based on a synergy between electric percolation and induced polarization has been raised to prepare 0–3 type nanocomposites with an enhanced high permittivity (high-k) property and low loss at high frequency. This work aimed at optimizing that synergy to achieve the favorable properties mentioned above in composite dielectrics used at high frequencies such as 1 MHz and 1 GHz. Conductive beta-SiC nanoparticles with a particle size of ~30 nm were employed as filler and both insulating poly(vinyl alcohol) and polyvinyl chloride were employed as polymer matrices to construct two composite systems. Utilizing polyvinyl chloride rather than poly(vinyl alcohol) realizes higher comprehensive electrical properties in composites, ascribed to optimization of that synergy. The optimization was achieved based on a combination of mild induced polarization and polarization-assisted electric percolation. Therefore, this work might open the way for large-scale production of high-frequency applicable composite dielectrics with competitive comprehensive electrical properties.

APA, Harvard, Vancouver, ISO, and other styles

9

RATHEE, KANTA, and B. P. MALIK. "STRUCTURAL AND ELECTRICAL PROPERTIES OF TANTALUM PENTAOXIDE (Ta2O5) THIN FILMS – A REVIEW." International Journal of Modern Physics: Conference Series 22 (January 2013): 564–69. http://dx.doi.org/10.1142/s2010194513010672.

Full text

Abstract:

Down scaling of complementary metal oxide semiconductor transistors has put limitations on silicon dioxide to be used as an effective dielectric. It is necessary to replace the SiO 2 with a physically thicker layer of oxides of high dielectric constant. Thus high k dielectrics are used to suppress the existing challenges for CMOS scaling. Many new oxides are being evaluated as gate dielectrics such as Ta2O5 , HfO2 , ZrO2 , La2O3 , HfO2 , TiO2 , Al2O3 , Y2O3 etc but it was soon found that these oxides in many respects have inferior electronic properties to SiO2 . But the the choice alone of suitable metal oxide with high dielectric constant is not sufficient to overcome the scaling challenges. The various deposition techniques and the conditions under which the thin films are deposited plays important role in deciding the structural and electrical properties of the deposited films. This paper discusses in brief the various deposition conditions which are employed to improve the structural and electrical properties of the deposited films.

APA, Harvard, Vancouver, ISO, and other styles

10

Roland, C. M. "ELECTRICAL AND DIELECTRIC PROPERTIES OF RUBBER." Rubber Chemistry and Technology 89, no. 1 (March 1, 2016): 32–53. http://dx.doi.org/10.5254/rct.15.84827.

Full text

Abstract:

ABSTRACT This review describes electrical and dielectric measurements of rubbery polymers. The interest in the electrical properties is primarily due to the strong effect of conductive fillers, the obvious example being carbon black. Conductivity measurements can be used to probe dispersion and the connectivity of filler particles, both of which exert a significant influence on the mechanical behavior. Dielectric relaxation spectra are used to study the dynamics, including the local segmental dynamics and secondary relaxations, and for certain polymers the global chain modes. A recent development in the application of nonlinear dielectric spectroscopy is briefly discussed.

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Electrical and dielectric properties"

1

Miller, Stuart M. "Electrical measurement of sucrose in sugar beet." Thesis, Cranfield University, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.294156.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Hollertz, Rebecca. "Dielectric properties of wood fibre components relevant for electrical insulation applications." Licentiate thesis, KTH, Fiberteknologi, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-144611.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Pevzner, Boris. "Transport and dielectric properties of thin fullerene (C₆₀) films." Thesis, Massachusetts Institute of Technology, 1996. http://hdl.handle.net/1721.1/41403.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Lee, Hee Young. "Electrical transport properties of barium titanate-based capacitor ceramics." Diss., Virginia Polytechnic Institute and State University, 1987. http://hdl.handle.net/10919/77817.

Full text

Abstract:

Electrical conduction mechanisms in BaTiO₃-based ferroelectric capacitor ceramics with an emphasis on the X7R type were studied. Dominant charge carriers in this material were identified as conduction band electrons below a temperature of 850°C. This was substantiated by the following results: negative Seebeck coefficients, zero galvanic cell voltage, and evidence of space charge-limited currents in MLC capacitors and related ceramic. Effects of chip thickness on the electrical parameters, as well as the I-V characteristics, were studied. Chip electrical parameters such as resistivity, dielectric constant, and activation energy were found to be independent of chip thickness. Effects of ambient were also studied and differences in current-voltage behavior were attributed to surface effects. Complex impedance spectroscopy proved to be a useful technique in separating grain, grain boundary, and contact contributions to the total impedance. Impedance plots for X7R ceramic revealed negligible contact impedance. The most probable electrical transport mechanism in X7R ceramic is small polaron hopping, although the possibility of combining small polaron hopping and grain boundary transmission cannot be excluded.
Ph. D.

APA, Harvard, Vancouver, ISO, and other styles

5

Islam, M. H. "Studies of the optical and electrical properties of some dielectric oxide films." Thesis, Brunel University, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.378391.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Rajgadkar, Ajay. "Characterization of Dielectric Films for Electrowetting on Dielectric Systems." Scholar Commons, 2010. http://scholarcommons.usf.edu/etd/3607.

Full text

Abstract:

Electrowetting is a phenomenon that controls the wettability of liquids on solid surfaces by the application of electric potential. It is an interesting method to handle tiny amounts of liquid on solid surfaces. In recent times, researchers have been investigating this phenomenon and have reported some unexplained behavior and degradation in the Electrowetting system performance. Electrowetting systems include the presence of electric field and different materials from metals to dielectrics and electrolytes that create an environment in which corrosion processes play a very important role. With the small dimensions of the electrodes, corrosion can cause failure quickly when the dielectric fails. In this work, commonly used dielectric films such as silicon dioxide and silicon nitride were deposited using Plasma Enhanced Chemical Vapor Deposition and characterized on the basis of thickness uniformity, etch rate measurements, Dry current – voltage measurements and Wet current – voltage measurements. Sputtered silicon dioxide films were also characterized using the same methods. The correlation between Dry I – V and Wet I – V measurements was studied and a comparison of dielectric quality of films based on these measurements is presented. Also, impact of different liquids on the dielectric quality of films was studied.

APA, Harvard, Vancouver, ISO, and other styles

7

Appello, Mario. "Real-time measurement of electrical properties during the processing of conductive polymers." Thesis, University of Warwick, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.341559.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Mueller, Brennen. "Photo-definable dielectrics with improved lithographic, mechanical, and electrical properties." Diss., Georgia Institute of Technology, 2015. http://hdl.handle.net/1853/53494.

Full text

Abstract:

Permanent dielectric materials are integral to the fabrication of microelectronic devices and packaging. Dielectrics are used throughout devices to electrically and mechanically isolate conductive components. As such, they are required to have low electrical permittivity and robust mechanical properties. For packaging applications, dielectrics can be directly photo-definable. Dielectrics need to have excellent lithographic properties. These properties are pivotal for enabling high yield and low cost fabrication of reliable, energy efficient devices. The aim of this work was to develop new positive tone dielectrics which have improved or application-specific lithographic, mechanical, and electrical properties. To this end, several new dielectric polymers and chemistries were evaluated and characterized. Initially, it was desired to develop a positive tone, polynorbornene (PNB) dielectric that utilizes diazonaphthoquinone (DNQ) photochemistry. Cross-linking was achieved with epoxy cross-linkers during a thermal cure. Several DNQ-containing compounds were evaluated, but only one had good miscibility with PNB. The dissolution characteristics of PNB were measured with respect to polymer composition, DNQ loading, and cross-linker loading. PNB films exhibited unique dissolution properties, and these measurements allowed for an optimum formulation to be developed. A formulation with 20 pphr DNQ and 10 pphr epoxy cross-linker had sufficient inhibition in unexposed regions and fast dissolution in exposed regions. The resulting dielectric was the first positive tone, DNQ-based PNB dielectric. After achieving photo-definability, the cross-linking of the cured dielectric was evaluated by characterizing the mechanical properties. It was discovered that DNQ acted as a cross-linker in these films, and this insight was key to achieving good curing of the dielectric. Several experiments were performed to support this conclusions, and the reaction kinetics of this cross-linking reaction were evaluated. This effort produced a functional, positive tone dielectric with a sensitivity of 408 mJ cm-2 and contrast of 2.3. The modulus was 2.0 to 2.6 GPa and the dielectric constant of 3.7 to 3.9, depending on the curing conditions. The DNQ cross-linking results led to the investigation of other cross-linking chemistries for positive tone dielectrics. A chemically amplified (CA) photochemistry was utilized along with a Fischer esterification cross-linking reaction. Patterning and cross-linking were demonstrated with a methacrylate polymer. Successful positive tone lithography was demonstrated at a high sensitivity of 32.4 mJ cm-2 and contrast of 5.2. Cross-linking was achieved at 120°C as shown by residual stress and solubility measurements. The CA photochemistry and Fischer esterification cross-linking were also demonstrated using a PNB dielectric, which was shown to have improved lithographic properties: a sensitivity of 8.09 mJ cm-2 and contrast of ≥ 14.2. Work was performed to evaluate the effect of the polymer composition on the mechanical and electrical properties. A polymer with 60 mol% hexafluoroisopropanol norbornene and 40 mol% tert-butyl ester norbornene exhibited a dielectric constant of 2.78, which is lower than existing positive tone dielectrics. It also outperformed existing dielectrics in several other categories, including dark erosion, volume change, cure temperature, and in-plane coefficient of thermal expansion. However, a limitation of this dielectric was cracking in thick films. The final study was to improve the mechanical properties of this CA PNB dielectric specifically to enable 5 µm thick films. First, a terpolymer was tested that included a non-functional third monomer. The dielectric constant increased to 3.48 with 24 mol% of the third monomer. Second, low molecular weight additives were used to lower the modulus. Only one of the five tested additives enabled high quality, thick films. This additive did not significantly affect the dielectric constant at low loadings. An optimized formulation was made, and processing parameters were studied. The additive decreased the lithographic properties, lowering the sensitivity to 175 mJ cm-2 and lowering the contrast to 4.36. In all, this work produced three functional dielectrics with positive tone photo-definability and good lithographic properties. Each dielectric can serve a variety of purposes in microelectronics packaging.

APA, Harvard, Vancouver, ISO, and other styles

9

Li, Xiang, and Yan Jiang. "Design of a Cylindrical Cavity Resonator for Measurements of Electrical Properties of Dielectric Materials." Thesis, Högskolan i Gävle, Avdelningen för elektronik, matematik och naturvetenskap, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-7687.

Full text

Abstract:

In microwave communications, the main aspects for affecting the dielectric losses in the materials are relating to the dielectric properties and the radiation frequencies. Normally, the different dielectric materials will lead to the different losses and reflections for microwave frequencies. To evaluate the dielectric properties from the different materials plays an essential role in the microwave engineering. There are many approaches can be used to measure the dielectric materials, e.g. capacitor methods, transmission line methods, cavity resonator methods, open cavity methods and so on. The cavity resonator method is one of the most popular ways for measuring the dielectric materials. In this thesis, some of the techniques will be reviewed, and the TM010 mode cylindrical cavity resonator with perturbation technique will be used for determining the dielectric properties. The design and measurements will be presented in both simulations and practice. With 1.2GHz cavity resonator, in the simulations, the dielectric permittivity for Teflon is measured as 2.09-0.0023i and 2.12-0.0116 in copper cavity and ferromagnetic cavity. Finally the sample is measured as 3.83-0.12i in practice.

APA, Harvard, Vancouver, ISO, and other styles

10

Tseng, Jung-Kai. "Enhanced Dielectric Properties of Multilayer Capacitor Film via Interfacial Polarization." Case Western Reserve University School of Graduate Studies / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=case1449137228.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Electrical and dielectric properties"

1

Galewski, Zbigniew, and Lucjan Sobczyk. Dielectric properties of liquid crystals. Trivandrum: Transworld Research Network, 2007.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

Church, Ronald H. Dielectric properties of low-loss minerals. [Pittsburgh]: U.S. Dept. of the Interior, 1988.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Church, Ronald H. Dielectric properties of low-loss minerals. Washington, DC: U.S. Bureau of Mines, 1988.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

Kent, M. Electrical and dielectric properties of food materials: A bibliography and tabulated data. Hornchurch, Essex, England: Science and Technology Publishers, 1987.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Pethig, Ronald. Dielectric and electronic properties of biological materials. Ann Arbor, Mich: UMI Books on Demand, 2001.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Dielectric properties of wood and wood-based materials. Berlin: Springer-Verlag, 1993.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

Webb, William E. Measurement of dielectric properties of minerals at microwave frequencies. [Avondale, Md.]: U.S. Dept. of the Interior, Bureau of Mines, 1986.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

International, Conference on Properties and Applications of Dielectric Materials (2nd 1988 Beijing China). Proceedings: Second International Conference on Properties and Applications of Dielectric Materials, Beijing, China, September 12-16, 1988. Beijing, China: Tsinghua University Press, 1988.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

International Conference on Properties and Applications of Dielectric Materials (2nd 1988 Beijing, China). Proceedings: Second International Conference on Properties and Applications of Dielectric Materials, Beijing, China, September 12-16, 1988. New York, NY (345 E. 47th St., New York 10017): Institute of Electrical and Electronics Engineers, Inc., 1988.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

N, Zharkov V., ed. Geoėlektricheskie svoĭstva mineralov i gornykh porod pri vysokikh davlenii͡a︡kh i temperaturakh. Moskva: Nauka, 1989.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Electrical and dielectric properties"

1

Fothergill, J. C. "Electrical Properties." In Dielectric Polymer Nanocomposites, 197–228. Boston, MA: Springer US, 2009. http://dx.doi.org/10.1007/978-1-4419-1590-0_7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Fothergill, J. C. "Electrical Properties." In Dielectric Polymer Nanocomposites, 197–228. Boston, MA: Springer US, 2009. http://dx.doi.org/10.1007/978-1-4419-1591-7_7.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Sirdeshmukh, D. B., L. Sirdeshmukh, and K. G. Subhadra. "Dielectric and Electrical Properties." In Alkali Halides, 137–53. Berlin, Heidelberg: Springer Berlin Heidelberg, 2001. http://dx.doi.org/10.1007/978-3-662-04341-7_5.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Zeller, H. R., and E. Cartier. "Electron Scattering and Dielectric Breakdown in Liquid and Solid Dielectrics." In The Liquid State and Its Electrical Properties, 455–64. Boston, MA: Springer US, 1988. http://dx.doi.org/10.1007/978-1-4684-8023-8_18.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Gosse, J. P. "Electric Conduction in Dielectric Liquids." In The Liquid State and Its Electrical Properties, 503–17. Boston, MA: Springer US, 1988. http://dx.doi.org/10.1007/978-1-4684-8023-8_20.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Huebner, W., F. C. Jang, and H. U. Anderson. "Dielectric and Electrical Properties of BaTiO3 Composites." In Tailoring Multiphase and Composite Ceramics, 433–43. Boston, MA: Springer US, 1986. http://dx.doi.org/10.1007/978-1-4613-2233-7_34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Burzo, E. "Electrical conductivities and dielectric properties of faujasites." In Magnetic Properties of Non-Metallic Inorganic Compounds Based on Transition Elements, 1379–96. Berlin, Heidelberg: Springer Berlin Heidelberg, 2017. http://dx.doi.org/10.1007/978-3-662-49337-3_61.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Zahn, Markus. "Space Charge Effects in Dielectric Liquids." In The Liquid State and Its Electrical Properties, 367–430. Boston, MA: Springer US, 1988. http://dx.doi.org/10.1007/978-1-4684-8023-8_16.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Freeman, Gordon R. "Electron Scattering and Mobility in Dielectric Liquids." In The Liquid State and Its Electrical Properties, 251–72. Boston, MA: Springer US, 1988. http://dx.doi.org/10.1007/978-1-4684-8023-8_11.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Nizamuddin, Sabzoi, Sabzoi Maryam, Humair Ahmed Baloch, M. T. H. Siddiqui, Pooja Takkalkar, N. M. Mubarak, Abdul Sattar Jatoi, et al. "Electrical Properties of Sustainable Nano-Composites Containing Nano-Fillers: Dielectric Properties and Electrical Conductivity." In Sustainable Polymer Composites and Nanocomposites, 899–914. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-05399-4_30.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Electrical and dielectric properties"

1

Fujita, Shigetaka, Katsuyoshi Shinyama, and Makoto Baba. "Electrical properties of polyimide." In International Conference on Dielectric and Related Phenomena '98, edited by Andrzej Wlochowicz. SPIE, 1999. http://dx.doi.org/10.1117/12.373691.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Hockicko, Peter, Peter Bury, and Francisco Munoz. "Electrical and dielectric properties of LiPON glasses." In 2012 ELEKTRO. IEEE, 2012. http://dx.doi.org/10.1109/elektro.2012.6225672.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

ISHITANI, Akihiko. "Dielectric/Silicon Interface Structures and Electrical Properties." In 1996 International Conference on Solid State Devices and Materials. The Japan Society of Applied Physics, 1996. http://dx.doi.org/10.7567/ssdm.1996.sympo.ii-1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Bartsch, Carrie M., Guru Subramanyam, James G. Grote, F. Kenneth Hopkins, Lawrence L. Brott, and Rajesh R. Naik. "Dielectric and electrical transport properties of biopolymers." In Integrated Optoelectronic Devices 2007, edited by James G. Grote, Francois Kajzar, and Nakjoong Kim. SPIE, 2007. http://dx.doi.org/10.1117/12.699561.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Tuncer, Enis, Isidor Sauers, D. James, and Alvin Ellis. "Electrical properties of a commercial resin." In 2006 IEEE Conference on Electrical Insulation and Dielectric Phenomena. IEEE, 2006. http://dx.doi.org/10.1109/ceidp.2006.312075.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Ohki, Y., and N. Hirai. "Dielectric Properties of Biodegradable Polymers." In 2006 IEEE Conference on Electrical Insulation and Dielectric Phenomena. IEEE, 2006. http://dx.doi.org/10.1109/ceidp.2006.312020.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Marci, M., I. Kolcunova, and J. Kurimsky. "Dielectric properties of natural esters." In 2011 10th International Conference on Environment and Electrical Engineering (EEEIC). IEEE, 2011. http://dx.doi.org/10.1109/eeeic.2011.5874663.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Hirano, Y., R. Hanaoka, N. Osawa, K. Miyagi, Y. Fujita, and Y. Kanamaru. "Electrical and mechanical properties of nanocomposite materials containing electrically dispersed MWCNTs." In 2016 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP). IEEE, 2016. http://dx.doi.org/10.1109/ceidp.2016.7785466.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Tuncer, Enis, and Isidor Sauers. "Effective dielectric properties of binary dielectric mixtures on checkerboards." In 2012 IEEE Conference on Electrical Insulation and Dielectric Phenomena - (CEIDP 2012). IEEE, 2012. http://dx.doi.org/10.1109/ceidp.2012.6378860.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Mentlik, V., P. Trnka, J. Pihera, and P. Prosr. "Electrical properties propagation of exposed combined insulation." In 2008 IEEE International Conference on Dielectric Liquids (ICDL 2008). IEEE, 2008. http://dx.doi.org/10.1109/icdl.2008.4622462.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Electrical and dielectric properties"

1

Baker-Jarvis, James. Electrical properties and dielectric relaxaction of DNA in solution. Gaithersburg, MD: National Bureau of Standards, 1998. http://dx.doi.org/10.6028/nist.tn.1509.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Sombra, Antonio S. Electrical and Structural Properties Study of Layered Dielectric and Magnetic Composites and Blends Structures for RF and Microwave Applications. Fort Belvoir, VA: Defense Technical Information Center, June 2014. http://dx.doi.org/10.21236/ada606573.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Johnson, Francis S. Dielectric Properties of Magnetoplasmas. Fort Belvoir, VA: Defense Technical Information Center, November 1989. http://dx.doi.org/10.21236/ada293571.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Khodorkovsky, Jacob, Boris Khusid, Andreas Acrivos, and Michael Beltran. Comprehensive Electrical Evaluation of Polyalphaolefin (PAO) Dielectric Coolant. Fort Belvoir, VA: Defense Technical Information Center, November 1997. http://dx.doi.org/10.21236/ada363781.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Rajca, Andrzej. Organic Polymers with Magneto-Dielectric Properties. Fort Belvoir, VA: Defense Technical Information Center, March 2007. http://dx.doi.org/10.21236/ada467781.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Giatti, Brandon. Optical Properties of Nanostructured Dielectric Coatings. Portland State University Library, January 2000. http://dx.doi.org/10.15760/etd.1939.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

L. E. Lagos and M. A. Ebadian. Dielectric Properties of Low-Level Liquid Waste. Office of Scientific and Technical Information (OSTI), October 1998. http://dx.doi.org/10.2172/932.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Curtis, John O. Dielectric Properties of Soils, Fort Carson, CO. Fort Belvoir, VA: Defense Technical Information Center, August 1996. http://dx.doi.org/10.21236/ada386356.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Cuddihy, E. F. Concept for the intrinsic dielectric strength of electrical insulation materials. Office of Scientific and Technical Information (OSTI), April 1985. http://dx.doi.org/10.2172/5633930.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Stricklett, K. L., and J. Baker-Jarvis. Electrical properties of biological materials:. Gaithersburg, MD: National Institute of Standards and Technology, 2000. http://dx.doi.org/10.6028/nist.ir.6564.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!