Relevant bibliographies by topics / Electrical power engineering

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'Electrical power engineering'

Author: Grafiati
Published: 4 June 2021
Last updated: 18 June 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Electrical power engineering.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Electrical power engineering"

1

Gamlin, J. F. "Economics of Electrical Power Engineering." Electronics and Power 33, no. 3 (1987): 206. http://dx.doi.org/10.1049/ep.1987.0128.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Serdenko, Taisiia, Vasyl Kabatsii, Ruslan Rosul, and Larysa Prots. "MEASUREMENT AND CONTROL METHODS IN ELECTRICAL ENGINEERING." Measuring Equipment and Metrology 86, no. 2 (2025): 12–17. https://doi.org/10.23939/istcmtm2025.02.012.

Full text
Abstract:
The article focuses on innovative measurement and control methods in electrical power engineering, specifically addressing challenges of power quality, signal diagnostics, and automation within smart grids. Emphasis is placed on wavelet analysis, smart metering, IoT integration, and automated control systems. These technologies are examined in the context of enhancing the adaptability and efficiency of modern electrical systems in line with Industry 4.0 requirements. Particular emphasis is placed on wavelet analysis, which serves as a universal tool for diagnosing non-stationary electrical signals, assessing power quality, and detecting harmonic distortions. Thanks to its capability for time-frequency localization, wavelet analysis enables effective signal processing and facilitates tasks such as transient process monitoring, voltage flicker analysis, and improving the accuracy of electrical measurements. This methodology opens new prospects for maintaining the stability of energy systems even under the challenging conditions of renewable energy integration. Special attention is given to the analysis of the role of smart technologies in contemporary energy systems. The advantages of Smart Metering systems—which ensure the automatic collection, analysis, and real-time transmission of energy consumption data—are discussed. This enables efficient management of energy resource distribution, reduces energy losses, and enhances transparency in the relationships between consumers and suppliers. The integration of Smart Metering with Internet of Things (IoT) technologies contributes to the creation of adaptive systems capable of responding to changing conditions in real time, thereby ensuring the stability and efficiency of smart grids. The article also explores the prospects of automated control systems that incorporate intelligent data collection devices and adaptive control algorithms. These systems significantly improve monitoring and diagnostics, facilitate the integration of renewable energy sources, and enhance power quality indicators. In particular, the automation of control processes and the implementation of machine learning technologies open new opportunities for forecasting the behavior of energy systems and increasing their resilience. The solutions presented in the study are aimed at creating adaptive, resilient, and high-tech energy systems that meet the modern challenges of Industry 4.0. Through the integration of wavelet analysis, Smart Metering, IoT, and automated control systems, effective management of energy resources, network stability, and the optimization of energy resource usage in the global energy system can be achieved.
APA, Harvard, Vancouver, ISO, and other styles
3

Alhassan, Musa Oruma, Olatoye Olaniyan Stephen, and Ojomaje Anyah Vincent. "Exceptional Power and Efficiency Electrical Power Engineering with DC." International Journal of Innovative Science and Research Technology (IJISRT) 9, no. 2 (2024): 11. https://doi.org/10.5281/zenodo.10730142.

Full text
Abstract:
Underlying the high current demand for an energy source that has been increasing recently is. It necessitates that these sources be accessible, affordable, and reliable. The opposite has been confirmed until now, whereby most power derivatives have been limited to alternating or direct currents. Nevertheless, with the unprecedented advances in the power electronics industry, it is possible to moderate between two forms of power sources without much difficulty. The technical progress one has got, provided high power high voltage DC-DC converters have made call-backs possible high power sources – low appliances. With the technique of the thorough concise, insightful and practical analysis, the construct and use of the high efficiency generation system generated digitally on this study firmly based. This work uses a type of PWM-based duty cycle control with the assistance of a microcontroller. The earliest simulations were conducted using software designed for engineering, like MATLAB and Proteus ISIS, before proceeding with construction. Proper analysis was made to ensure that virtual and real-life outcomes display an appropriate level of balance.  
APA, Harvard, Vancouver, ISO, and other styles
4

Cooper, C. B. "Taking electrical power engineering into the 1990s." Power Engineering Journal 4, no. 1 (1990): 2. http://dx.doi.org/10.1049/pe:19900001.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Jasmon, G. B. "Book Review: Electrical Power Transmission System Engineering." International Journal of Electrical Engineering & Education 27, no. 1 (1990): 62. http://dx.doi.org/10.1177/002072099002700110.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Lum, Lucas, Chong-Wei Tan, Chun Fei Siah, Kun Liang, and Beng Kang Tay. "Graphitisation of Waste Carbon Powder with Femtosecond Laser Annealing." Micromachines 13, no. 1 (2022): 120. http://dx.doi.org/10.3390/mi13010120.

Full text
Abstract:
Graphitisation of structural characteristics and improvement in electrical conductivity was reported onto waste carbon powder through femtosecond laser annealing. Raman spectroscopy on the carbon powder pre- and post-annealing showed a shift from amorphous-like carbon to graphitic-like carbon, which can be explained by the three-stage model. Electrical I-V probing of the samples revealed an increase in conductivity by up to 90%. An increase in incident laser power was found to be correlated to an increase in conductivity. An average incident laser power of 0.104 W or less showed little to no change in electrical characteristics, while an average incident laser power of greater than 1.626 W had a destructive effect on the carbon powder, shown through the reduction in powder. The most significant improvement in electrical conductivity has been observed at laser powers ranging from 0.526 to 1.286 W. To conclude, the graphitisation of waste carbon powder is possible using post-process femtosecond laser annealing to alter its electrical conductivity for future applications.
APA, Harvard, Vancouver, ISO, and other styles
7

T. Hattori, Haroldo, Sanjida Akter, and Khalil As’ham. "Reconstructing A 3rd Year Power Electronics Course." Journal of Research and Education 2, no. 1 (2024): 01–10. https://doi.org/10.33140/jre.02.01.12.

Full text
Abstract:
Electrical Engineering and technology evolve at a very fast pace. However, undergraduate courses, especially those who build fundamental knowledge in Electrical Engineering, do not change so fast. In this article, we describe a major redesign of a 3rd year power electronics course (first course to introduce power electronics in the degree) incorporating new educational technologies and an improved pedagogical approach: the net effect was better student experience and satisfaction, and better learning.
APA, Harvard, Vancouver, ISO, and other styles
8

Zhang, L. D., M. H. J. Bollen, J. M. Aller, et al. "Power Engineering Letters." IEEE Power Engineering Review 18, no. 7 (1998): 50–56. http://dx.doi.org/10.1109/mper.1998.686958.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

EI-Hawary, M. F. "Power engineering letters." IEEE Power Engineering Review 20, no. 4 (2000): 57–73. http://dx.doi.org/10.1109/mper.2000.833021.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

El-Hawary, M. E. "Power engineering letters." IEEE Power Engineering Review 21, no. 6 (2001): 59–68. http://dx.doi.org/10.1109/mper.2001.925472.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Electrical power engineering"

1

Sheard, Benjamin Charles De Villiers. "An electrical power system for CubeSats." Master's thesis, University of Cape Town, 2015. http://hdl.handle.net/11427/20101.

Full text
Abstract:
The advent of CubeSats has provided a platform for relatively low-budget programmes to realise space missions. In South Africa, Stellenbosch University and the Cape Peninsula University of Technology have impressive space programmes and have been involved in numerous successful satellite launches. A number of CubeSat projects are currently in progress and commercial-grade Attitude Determination and Control Systems (ADCS), and communications modules, are being developed by the respective universities. The development of a CubeSat-compatible Electrical Power System remains absent, and would be beneficial to future satellite activity here in South Africa. In this thesis, some fundamental aspects of electronic design for space applications is looked at, including but not limited to radiation effects on MOSFET devices; this poses one of the greatest challenges to space-based power systems. To this extent, the different radiation-induced effects and their implications are looked at, and mitigation strategies are discussed. A review of current commercial modules is performed and their design and performance evaluated. A few shortcomings of current systems are noted and corresponding design changes are suggested; in some instances these changes add complexity, but they are shown to introduce appreciable system reliability. A single Li-Ion cell configuration is proposed that uses a 3.7 V nominal bus voltage. Individual battery charge regulation introduces minor inefficiencies, but allows isolation of cells from the pack in the case of cell failure or degradation. A further advantage is the possibility for multiple energy storage media on the same power bus, allowing for EPS-related technology demonstrations, with an assurance of minimum system capabilities. The design of each subsystem is discussed and its respective failure modes identified. A limited number of single points of failure are noted and the mitigation strategies taken are discussed. An initial hardware prototype is developed that is used to test and characterise system performance. Although a few minor modifications are needed, the overall system is shown to function as designed and the concepts used are proven.
APA, Harvard, Vancouver, ISO, and other styles
2

Lehr, Rainer Helmut. "Web based distance learning for power system engineering." Master's thesis, University of Cape Town, 2000. http://hdl.handle.net/11427/5186.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Bazrafshan, Mohammadhafez. "Modeling and Optimization of Electrical Power Networks." Thesis, The University of Texas at San Antonio, 2018. http://pqdtopen.proquest.com/#viewpdf?dispub=10929124.

Full text
Abstract:
<p> The electrical power network is moving towards sustainability and cost-efficiency. The former is achieved by incorporating distributed renewable generation and the latter requires employing intelligent control and optimization techniques. As the main interface between the electricity grid and its consumers, the distribution network will play a pivotal role in the near future. In practice, distribution networks operate under unbalanced conditions and far from single-phase simplifications. Thus, the majority of this dissertation aims to provide comprehensive computational tools for multi-phase distribution networks. A final part of this work touches upon transmission networks to explore benefits of combining control and optimization algorithms in various time-scales. </p><p> In Chapter 2, models of the most practical distribution elements, including wye and delta ZIP loads, transmission lines with missing phases, step-voltage regulators (SVRs), and three-phase transformers are assembled. Specifically for SVRs, novel nodal admittance models are derived from first principles. Concatenation of these models yields the bus admittance matrix (Y-Bus). Using linear algebra, it is then shown that Y-Bus invertibility is compromised only when the network includes ungrounded or delta-connected transformers. For such devices, we mathematically show why a previously proposed modification in their nodal admittance restores Y-Bus invertibility. Mathematical guarantees for Y-Bus invertibility is important since, for instance, it allows one to run the Z-Bus method to compute voltage solutions of power flow equations. </p><p> In Chapter 3, theoretical convergence of the Z-Bus method in multi-phase distribution networks with wye and delta ZIP loads is studied. By viewing the Z-Bus method as a fixed-point iteration, sufficient conditions for its contraction are derived. These conditions define a region, expressed in terms of Y-Bus and ZIP loads, in which unique voltage solutions to power flow equations exist. </p><p> Chapter 4 considers a planning problem for inverter-based renewable systems in multi-phase distribution networks. The objective is to minimize the installation costs of distributed generators (DG) during the planning stage and the costs of power import plus DG curtailment during operations. Three- and single-phase inverter models that preserve the underlying mapping between renewable uncertainty to power injection are presented. Scenario-based characterization of distributed generation and loads as well as power flow linearizations are leveraged to render a stochastic formulation for optimal DG placement and sizing. The proposed problem is a mixed-integer second-order cone program that is solved efficiently. Simulations on several medium-to-large-sized distribution test feeders promise that optimal stochastic planning of DGs reduces costs during validation, compared to a scheme where uncertainty is only represented by its average value. </p><p> Chapter 5 presents an optimal power flow (OPF) problem that allows for tap selection of various types of SVRs. The goal is to minimize power import while satisfying operational constraints. A set of power flow equations are derived that explicitly account for the tap ratios based on the nodal admittance model of SVRs (Chapter 2). Chordal semidefinite relaxations of the power flow equations are pursued for non-SVR edges. For each SVR type, novel relaxations are proposed to handle the non-convex primary-to-secondary voltage relationship. The formulation is a semidefinite program (SDP). Numerical tests on the IEEE 37-bus distribution feeder indicate the success of the proposed SDP in selecting taps of wye, closed-delta, and open-delta SVRs. </p><p> Chapter 6 augments the transmission OPF problem with a load-following controller whose costs are expressed through the linear quadratic regulator (LQR). The power network is described by a set of nonlinear differential algebraic equations (DAEs). By linearizing the DAEs around a known equilibrium, a linearized OPF with operational constraints is formulated first. This OPF is then augmented by a set of linear matrix inequalities equivalent to the implementation of an LQR controller. The resulting formulation, termed LQR-OPF, is an SDP which furnishes optimal steady-state setpoints and an optimal feedback law to steer the system to the new steady state with minimum load-following control costs. Experiments on test cases demonstrate that the setpoints computed by LQR-OPF result in lower overall costs and frequency deviations compared to those of a scheme where OPF and load-following control are considered separately.</p><p>
APA, Harvard, Vancouver, ISO, and other styles
4

Yang, Xiaoguang Miu Karen Nan. "Unbalanced power converter modeling for AC/DC power distribution systems /." Philadelphia, Pa. : Drexel University, 2006. http://hdl.handle.net/1860/1231.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kyaw, Phyo Aung. "Efficient Power-Dense Passive Components for Next-Generation High-Frequency Power Conversion." Thesis, Dartmouth College, 2018. http://pqdtopen.proquest.com/#viewpdf?dispub=10978933.

Full text
Abstract:
<p> Advancements in energy systems and electric vehicles have increased demands for efficient and compact power electronics. High-frequency operation is important for miniaturization of switching power converters since it reduces energy storage requirement and improves transient performance. Wide-bandgap semiconductors allow for efficient high-frequency switching, but full realization of their potential in power electronics requires efficient power-dense high-frequency passive components. Magnetic components such as inductors and transformers, due to their frequency-dependent losses, are increasingly the main bottleneck in improving the density of power converters. </p><p> Although incremental improvements in magnetics, and passives in general, are enabling advances in power electronics, the importance of the problem merits consideration of the fundamental performance limits and exploration of alternative passive component technologies. Analysis of various energy storage mechanisms indicates the potential of mechanical storage coupled with a piezoelectric transduction mechanism. Optimally designed piezoelectric and electromagnetic resonators, in ideal scenarios, are capable of orders-of-magnitude higher power density than passive components in use today. Investigation of various practical limitations provides insights into possible technological development for improving the performance of passive components and switching converters. </p><p> High-performance resonant tanks and power converters are also presented. First, an integrated LC resonator with a multilayer foil winding demonstrates 50% better performance compared to a similar resonator with a single-layer skin-effect limited winding. Second, an optimally designed integrated LC resonant tank, made of commercial Class I ceramic capacitors, has a sub-m? effective series resistance and incurs only 4.56 W loss, resulting in a 7.42 kW power capability in a small 1.14 cm<sup>3</sup> volume. The high performance means that a power converter utilizing these prototype resonators will be limited by the performance of switches rather than by the passive component. Finally, a prototype 48 V to 16 V stacked-ladder converter, with a high active device utilization figure of merit, combined with a small low-loss integrated resonator, provides a peak efficiency of 97.8% and a high power density of 913 W/in<sup>3</sup>. The theoretical analysis, together with these prototypes, shows the potential for significant improvement in the efficiency and power density of high-frequency switching converters, and the various technological developments required to achieve such improvements.</p><p>
APA, Harvard, Vancouver, ISO, and other styles
6

Tai, Sio Un. "Power quality study in Macau and virtual power analyzer." Thesis, University of Macau, 2012. http://umaclib3.umac.mo/record=b2586277.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Fernando, Warnakulasuriya A. M. "Power quality improvement in power systems using a static VAR compensator." Thesis, California State University, Long Beach, 2017. http://pqdtopen.proquest.com/#viewpdf?dispub=10638886.

Full text
Abstract:
<p> The primary purpose of a power system is to transform energy from one of its naturally obtainable forms into electricity, and then supply it through grids to points of consumption. With the increasing demand for electricity, more reliable methods are required to keep the quality of power in the desired range. This paper focuses on the impacts that a static var compensator (SVC) has on power quality. A two-area power system was used to demonstrate the power quality enhancements of a SVC, and simulations were done on the Real Time Digital Simulator (RTDS) and Electrical Transients Analyzer Program (ETAP). Simulations were performed for both steady-state and transient conditions to exhibit the dynamic capabilities of a SVC. Also, two different types of SVC controls were used and their effectiveness was analyzed. Simulations showed that the steady-state voltage, namely at bus 8 where the SVC was installed, improved from 0.94pu to 1.0pu. In addition, the voltage recovery time of bus 8 was improved from over 40s to approximately 2s.</p><p>
APA, Harvard, Vancouver, ISO, and other styles
8

Villanueva, Anita A. (Anita Ariel) 1978. "Electrical reliability of RF power GaAs PHEMTs." Thesis, Massachusetts Institute of Technology, 2003. http://hdl.handle.net/1721.1/87862.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Tiako, Remy. "Optimal design of power system stabilizer (PPS) using multi-power flow conditions." Master's thesis, University of Cape Town, 2007. http://hdl.handle.net/11427/5096.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Lam, Chi Seng. "An adaptive low dc-voltage controlled LC coupling hybrid active power filter in three-phase four-wire power systems." Thesis, University of Macau, 2012. http://umaclib3.umac.mo/record=b2580608.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Electrical power engineering"

1

Ushakov, Vasily Y. Electrical Power Engineering. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-62301-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

A, Thue William, ed. Electrical power cable engineering. 2nd ed. Marcel Dekker, 2003.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

A, Thue William, ed. Electrical power cable engineering. Marcel Dekker, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Binns, D. F. Economics of electrical power engineering. Electrical Logic Power, 1986.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Wright, A. Electrical Power System Protection. Springer US, 1993.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

Aktiengesellschaft, Siemens. Power engineering & automation. Siemens Aktiengesellschaft, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Degeneff, Robert C. Principles of power engineering analysis. CRC Press, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

1951-, Smith Richard A., ed. Introduction toelectric power engineering. Harper & Row, 1985.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Marchenko, Aleksey, and Yu Babichev. Electrical engineering. INFRA-M Academic Publishing LLC., 2022. http://dx.doi.org/10.12737/1587594.

Full text
Abstract:
The textbook discusses the analysis and calculation of electrical and magnetic circuits, studied the purpose, design and functioning of electromagnetic devices, transformers and electrical machines. A separate chapter is devoted to the basics of electric drives — in particular, the choice of electric motor power for drives with different operating modes and their verification by heating and overload capacity.&#x0D; The systematic presentation of the material of module 1 "Electrical Engineering" meets the requirements for the results of mastering the basic discipline "Electrical Engineering and Electronics", which is part of the professional cycle of disciplines of the main educational programs of the federal state educational standards of higher education for bachelors of non-electrical engineering and engineers of non-electrical engineering specialties.&#x0D; For students of higher educational institutions studying in non-electrotechnical areas of bachelor's and graduate training.
APA, Harvard, Vancouver, ISO, and other styles
10

Christopoulos, C. Electrical Power System Protection. 2nd ed. Springer US, 1999.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Electrical power engineering"

1

Livesey, Andrew. "Electrical power." In Bicycle Engineering and Technology. Routledge, 2020. http://dx.doi.org/10.1201/9780367816841-7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Kories, Ralf, and Heinz Schmidt-Walter. "Power Supplies." In Electrical Engineering. Springer Berlin Heidelberg, 2003. http://dx.doi.org/10.1007/978-3-642-55629-6_9.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Sherrill, Lloyd Wade. "Electrical Systems." In Power Plant Engineering. Springer US, 1996. http://dx.doi.org/10.1007/978-1-4613-0427-2_17.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Stark, John P. W. "Electrical Power Systems." In Spacecraft Systems Engineering. John Wiley & Sons, Ltd, 2011. http://dx.doi.org/10.1002/9781119971009.ch10.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

N. Makarov, Sergey, Reinhold Ludwig, and Stephen J. Bitar. "AC Power and Power Distribution." In Practical Electrical Engineering. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-21173-2_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Rauf, S. Bobby. "Power Quality and Power Management." In Electrical Engineering Fundamentals. CRC Press, 2020. http://dx.doi.org/10.1201/9780429355233-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Makarov, Sergey N., Reinhold Ludwig, and Stephen J. Bitar. "AC Power and Power Distribution." In Practical Electrical Engineering. Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-319-96692-2_11.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Ushakov, Vasily Y. "Power Engineering and the Biosphere." In Electrical Power Engineering. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-62301-6_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Morris, Noel M. "Power Electronics." In Mastering Electrical Engineering. Macmillan Education UK, 1985. http://dx.doi.org/10.1007/978-1-349-18015-8_16.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Morris, Noel M. "Power Electronics." In Mastering Electrical Engineering. Macmillan Education UK, 1991. http://dx.doi.org/10.1007/978-1-349-12230-1_16.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Electrical power engineering"

1

Jaingeawkum, Sorasak, Suphanat Sodsa-Ard, Thirawit Chansiri, et al. "Power Grid Analyzer, Part I—Power Flow and Optimal Power Flow." In 2025 13th International Electrical Engineering Congress (iEECON). IEEE, 2025. https://doi.org/10.1109/ieecon64081.2025.10987791.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Nehme, Bechara, Elie Al Ahmar, and Joseph Zalaket. "Advising and Scheduling Tool Based on Electrical Power Engineering Concepts." In 2025 International Conference on Control, Automation, and Instrumentation (IC2AI). IEEE, 2025. https://doi.org/10.1109/ic2ai62984.2025.10932217.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

"Power Engineering, Electrical Engineering, Electromechanics." In 2018 XIV International Scientific-Technical Conference on Actual Problems of Electronics Instrument Engineering (APEIE). IEEE, 2018. http://dx.doi.org/10.1109/apeie.2018.8545354.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Ravishankar, Jayashri, John Fletcher, and Daming Zhang. "Electrical power engineering education at UNSW." In 2013 Australasian Universities Power Engineering Conference (AUPEC). IEEE, 2013. http://dx.doi.org/10.1109/aupec.2013.6725410.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Jeyasurya, B. "Introduction to electric power engineering using numerical methods for electrical engineers." In Proceedings of Power Engineering Society Summer Meeting. IEEE, 2001. http://dx.doi.org/10.1109/pess.2001.970302.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Cheng, K. W. E. "Electric Vehicle and Electrical Engineering Teaching Experience During Pandemic Disease." In 2022 9th International Conference on Power Electronics Systems and Applications (PESA). IEEE, 2022. http://dx.doi.org/10.1109/pesa55501.2022.10038404.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Parrado-Duque, Alejandro, Rusber Rodriguez-Velasquez, German Osma-Pinto, and Gabriel Ordonez-Plata. "Integration of Photovoltaic System in Low Voltage Electrical Network of the Electrical Engineering Building." In 2019 IEEE Workshop on Power Electronics and Power Quality Applications (PEPQA). IEEE, 2019. http://dx.doi.org/10.1109/pepqa.2019.8851564.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Bonatto, Luciano, Jonatas R. Kinas, Mauricio de Campos, Paulo S. Sausen, Manuel M. P. Reimbold, and Airam T. R. Z. Sausen. "Development of an urban electric vehicle as multidisciplinary work in electrical engineering." In 2013 Brazilian Power Electronics Conference (COBEP 2013). IEEE, 2013. http://dx.doi.org/10.1109/cobep.2013.6785198.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Avery, C. R., S. G. Burrow, and P. H. Mellor. "Electrical generation and distribution for the more electric aircraft." In 2007 42nd International Universities Power Engineering Conference. IEEE, 2007. http://dx.doi.org/10.1109/upec.2007.4469088.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Freeman, W. Eric. "Electrical Power System Integrated Thermal/Electrical System Simulation." In 27th Intersociety Energy Conversion Engineering Conference (1992). SAE International, 1992. http://dx.doi.org/10.4271/929315.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Electrical power engineering"

1

Weldon, Catherine, and Ronald Melton. Electrical Power Engineering Academic Landscape November 2011. Office of Scientific and Technical Information (OSTI), 2012. http://dx.doi.org/10.2172/1988430.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Lopez, Vanessa D., Benito F. Perez, Harold R. Harold R., and Melanie D. Johnson. Power Modeling Tools : Market Assessment. U.S. Army Engineer Research and Development Center, 2024. http://dx.doi.org/10.21079/11681/49468.

Full text
Abstract:
This work was performed by the Energy—Power and Mechanical Systems Branch, US Army Construction Engineering Research Laboratory (CERL), Engineer Research and Development Center (ERDC).This technical note provides a survey and market assessment of power modeling tools to assist the Office of the Assistant Secretary of the Army (OASA), Installations, Energy, and Environment (IE&amp;E), with effective decision-making when considering the features, advantages, and disadvantages of the software tools available for power system modeling on a typical small, medium, or large Army installation. This summary information reviews the capabilities and features of commercial power system modeling software tools. Installations may use these tools to model their electrical distribution systems and assess the impacts of facility electrification, electric vehicle deployment, microgrid implementation, and other electrical system projects.
APA, Harvard, Vancouver, ISO, and other styles
3

Singh, G. ,. Westinghouse Hanford. Engineering study for the phase 1 privatization facilities electrical power. Office of Scientific and Technical Information (OSTI), 1996. http://dx.doi.org/10.2172/325356.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

DFI's Electric Power System Foundations Committee. Design and Construction of Deep Foundations to Support Electric System Transmission Lines. Deep Foundations Institute, 2025. https://doi.org/10.37308/gd-2025-epsf-1.

Full text
Abstract:
Unlike the commercial building and transportation sectors, the electric transmission industry does not have a unified code that explicitly covers design and construction of the various foundation types currently utilized to support electrical structures; there is no overarching professional group that leads this effort. Existing guide documents developed by various utility and non-utility organizations describe general design methodology for foundation types used in the electric power industry, but their application, relevance and approach vary significantly from utility to utility. For this reason, DFI established the Electric Power Systems Foundations Working Group in 2013 and upgraded the Group to Committee status in 2018 after significant growth in membership and activity. This document summarizes the state of practice for the design and construction of electric system transmission lines for the purpose of aiding with future development of guidelines for the industry. This document is founded around recent industry state of the practice surveys performed by the Electric Power Research Institute (EPRI) (DiGioia 2010) and by this committee (Kandaris and Davidow 2015). Discussions provided are extended narratives of the various design and construction topics from the surveys and are based on the engineering judgment and knowledge of the committee members, along with many industry professionals who drafted sections and provided input via review to the document.
APA, Harvard, Vancouver, ISO, and other styles
5

Electric Power System Foundations Committee. Design and Construction of Deep Foundations to Support Electric System Transmission Lines. Deep Foundations Institute, 2025. https://doi.org/10.37308/cr-2025-epsf-1.

Full text
Abstract:
Unlike the commercial building and transportation sectors, the electric transmission industry does not have a unified code that explicitly covers design and construction of the various foundation types currently utilized to support electrical structures; there is no overarching professional group that leads this effort. Existing guide documents developed by various utility and non-utility organizations describe general design methodology for foundation types used in the electric power industry, but their application, relevance and approach vary significantly from utility to utility. For this reason, DFI established the Electric Power Systems Foundations Working Group in 2013 and upgraded the Group to Committee status in 2018 after significant growth in membership and activity. This document summarizes the state of practice for the design and construction of electric system transmission lines for the purpose of aiding with future development of guidelines for the industry. This document is founded around recent industry state of the practice surveys performed by the Electric Power Research Institute (EPRI) (DiGioia 2010) and by this committee (Kandaris and Davidow 2015). Discussions provided are extended narratives of the various design and construction topics from the surveys and are based on the engineering judgment and knowledge of the committee members, along with many industry professionals who drafted sections and provided input via review to the document.
APA, Harvard, Vancouver, ISO, and other styles
6

Maxey. L51537 Power Line Fault Current Coupling to Nearby Natural Gas Pipelines. Pipeline Research Council International, Inc. (PRCI), 1988. http://dx.doi.org/10.55274/r0010412.

Full text
Abstract:
Electric and natural gas utilities often find it advantageous to share rights-of-way. Available methods for evaluating electrical effects on gas pipelines have been difficult to use at best, and at worst, incorrect. A generalized approach that addresses inductive and conductive interferences has not been available. Initiated to fill that need, this work is part of a research effort cosponsored by EPRI and the Pipe Line Research Council International, Inc. (PRCI) �A generalized approach to the analysis of the effects of transmission line faults on natural gas transmission pipelines has been developed and is presented in this report. A state of the art user-friendly computational tool has been developed and verified for the analysis of interference between electrical power lines and nearby buried or aboveground pipelines. This computer program, ECCAPP, is distinguished by its ability to model and analyze accurately complex, realistic interactions between pipelines and power lines, using easily obtained input data. The final report consists of three volumes. An independent fourth volume was also developed to simplify the installation of the ECCAPP software.Volume 1 contains the theory upon which the ECCAPP computer program is based. A parametric analysis and graphical charts have been formulated using ECCAPP to permit estimates to be made in the field or during preliminary analyses for situations that are not too complex. A discussion of various useful mitigation methods is included. The discussion is based on previous research work and on the results of the parametric analysis.Volume 2 is a detailed user's manual which describes not only how to use the program itself, but also which engineering data must be sought during an analysis and how to assimilate it into a computer model. A detailed sample problem is included. A detailed \Glossary of Terms\" used by ECCAPP as well as suitable input data forms to be filled by power line and pipeline engineers are provided in the appendices.Volume 3 discusses the modeling and performance of pipeline insulation or coating.
APA, Harvard, Vancouver, ISO, and other styles
7

Wagner, C. L., and W. E. Feero. Recommended engineering practice to enhance the EMI/EMP immunity of electric power systems. Office of Scientific and Technical Information (OSTI), 1992. http://dx.doi.org/10.2172/10120622.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Wagner, C. L., and W. E. Feero. Recommended engineering practice to enhance the EMI/EMP immunity of electric power systems. Office of Scientific and Technical Information (OSTI), 1992. http://dx.doi.org/10.2172/6788914.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

CORPS OF ENGINEERS WASHINGTON DC. Engineering and Design: Clearances for Electric Power Supply Lines and Communication Lines Over Reservoirs. Defense Technical Information Center, 1997. http://dx.doi.org/10.21236/ada404125.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Peña, Ignacio, and Micaela Jenik. Deep Tech: The New Wave. Inter-American Development Bank, 2023. http://dx.doi.org/10.18235/0004947.

Full text
Abstract:
DeepTech startups are companies based on a scientific discovery or meaningful engineering innovation. Deep Tech startups involve significant technological risk and R&amp;D. However, Deep Tech innovation is critical to effectively address humanities grand challenges. DeepTech companies have the potential to catalyze change, establish new industries, and disrupt existing ones. Cutting-edge technologies like AI, solar power, electric vehicles, biotech, advanced manufacturing, and space-based broadband have the potential to pave new paths for economic growth, social equity, and environmental sustainability in the region. Today, with 340 ventured-back DeepTech startups, the DeepTech ecosystem in LAC is valued at USD 8 billion and has much potential to grow. The LAC region has strong advantages such as talent and R&amp;D cost, to further develop and grow the DeepTech ecosystem in LAC. By fostering DeepTech in the region, LAC countries will benefit from the creation of jobs, as well as from potential access to improved basic products and services. Poor and vulnerable communities may greatly benefit from the adoption and creation of new technologies.
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'Electrical power engineering' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography