Academic literature on the topic 'Electrical storage'

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Electrical storage.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Electrical storage"

1

Kirsch, Laurence D. "Compensating Electrical Storage Resources." Electricity Journal 24, no. 4 (2011): 72–77. http://dx.doi.org/10.1016/j.tej.2011.04.008.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Bagarti, Trilochan, and Arun M. Jayannavar. "Storage of Electrical Energy." Resonance 25, no. 7 (2020): 963–80. http://dx.doi.org/10.1007/s12045-020-1012-0.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Gandhi, K. S. "Storage of Electrical Energy." Indian Chemical Engineer 52, no. 1 (2010): 57–75. http://dx.doi.org/10.1080/00194501003759811.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Price, Anthony. "Briefing: Electrical energy storage options." Proceedings of the Institution of Civil Engineers - Energy 167, no. 1 (2014): 3–6. http://dx.doi.org/10.1680/ener.13.00010.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Whittingham, M. Stanley. "Electrical Energy Storage Using Flywheels." MRS Bulletin 33, no. 4 (2008): 419–20. http://dx.doi.org/10.1557/mrs2008.83.

Full text
Abstract:
Flywheel energy storage systems use the kinetic energy stored in a rotor; they are often referred to as mechanical batteries. On charging, the fywheel is accelerated, and on power generation, it is slowed. Because the energy stored is proportional to the square of the speed, very high speeds are used, typically 20,000–100,000 revolutions per minute (rpm). To minimize energy loss due to friction, the rotors are spun in a vacuum and use magnetic bearings. The rotors today are typically made of high-strength carbon composites. One of the main limits to fywheels is the strength of the material used for the rotor: the stronger the rotor, the faster it can be spun, and the more energy it can store.
APA, Harvard, Vancouver, ISO, and other styles
6

Kau, P. "Electrical connector for storage batteries." Journal of Power Sources 70, no. 1 (1998): 157. http://dx.doi.org/10.1016/s0378-7753(97)84090-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Buratynskyi, I. M. "Modeling the use of energy storage systems to transfer excess electricity from a solar power." Problems of General Energy 2021, no. 1 (2021): 38–44. http://dx.doi.org/10.15407/pge2021.01.038.

Full text
Abstract:
The peculiarity of the operation of solar photovoltaic power plants is the dependence of the generation power on weather conditions, which leads to the maximum production of electrical energy at noon hours of the day. Due to a decrease in electricity consumption, insufficient unloading capacity of pumped storage power plants in the integrated energy system of Ukraine and the specifics of electricity production at solar photovoltaic power plants, dispatching restrictions on the level of generation power are already taking place. To transfer volumes of electrical energy in the world, electrical energy storage systems are used, which operate based on lithium-ion storage batteries. Such systems have a number of advantages over other battery energy systems, which allows their implementation in almost any power generation facility. With the help of energy storage systems, it is possible to make a profit through the purchase of electric energy during a period of low prices and its release during a period of high prices, allowing consumers to save money on its payment. In this paper, we simulate the use of a battery energy storage system for storing electrical energy to transfer excess electrical energy from a solar photovoltaic power plant. To conduct a study and identify excess capacity of a solar photovoltaic power plant, the daily schedule of electrical load is equalized to the capacity of a separate power plant Because of the study, the optimal time for charging and discharging the battery was determined, from which it can be seen that the need to transfer excess electricity to a solar photovoltaic power plant occurs at lunchtime, and their discharge at the peak is the graph of the electrical load of the power system. The aggregate operation of a solar power plant with a total installed capacity of photovoltaic power at the level of 10 MW (DC) and a battery energy storage system for accumulating electric energy with a capacity of 3.75 MWh was simulated. For the study day, the required capacity of a battery system for accumulating electric energy at the level of 1.58 MW was determined. Using the methodology of the levelized cost of electricity and storage, a technical and economic assessment of the transfer of excess capacity of a solar photovoltaic power plant using a battery system for storing electrical energy was carried out. When calculating the cost of storage, the cost of the transferred electrical energy from the solar power plant was taken into account. From the results of technical and economic calculations, it can be seen that, in terms of the cost of equipment, as of 2020, the cost of supplying excess electrical energy from the battery energy storage system is growing when compared with the supply from a solar photovoltaic power plant. Taking into account some forecast assumptions, the cost of electricity supply from the battery energy storage system was calculated for the mode of transferring excess capacity of a solar photovoltaic power plant for 2025 and 2030 years. Keywords: modeling, power system, load demand curve, solar photovoltaic power plant, electric energy storage system, cost
APA, Harvard, Vancouver, ISO, and other styles
8

Sousa, Pedro José, Manuel Rodrigues Quintas, and Paulo Abreu. "Modular System for Cold Storage Monitoring." International Journal of Online Engineering (iJOE) 12, no. 04 (2016): 46. http://dx.doi.org/10.3991/ijoe.v12i04.5127.

Full text
Abstract:
This work describes the development of an embedded electronic-based monitoring system suitable for cold-storage electrical equipment. The system uses a touchscreen and provides sensors for temperature, relative humidity, electric power consumption and detection of door position. To monitor the electric power, a special purpose current sensor was developed and calibrated. The system adopts a modular architecture using cabled and wireless communications, making it suitable for integration in other logging and alarm generation systems. The system was tested on a home fridge to demonstrate its capabilities.
APA, Harvard, Vancouver, ISO, and other styles
9

Qi, Xiu Li, Kang Zhang, Guang Xian Wang, Zhen Fu, and Yi Chen Dong. "Technology of Magnetic Flywheel Energy Storage." Advanced Materials Research 443-444 (January 2012): 1055–59. http://dx.doi.org/10.4028/www.scientific.net/amr.443-444.1055.

Full text
Abstract:
.As a new way of storing energy, magnetic suspension flywheel energy storage, has provided an effective way in solving present energy problems with the characteristics of large energy storage, high efficiency and fast charge-discharge speed and so on. The paper mainly elaborated the basic principle of magnetic suspension energy storage system, introduced the structural features of flywheel rotor, magnetic bearing, electric machine, electric power system and other auxiliary body. On this basis, it analyzed applications on electrical peak-modulating, Uninterruptible Power Supply, Hybrid Electric Vehicle, satellite attitude control and so on, on the purpose of the further development and promotion of this new technology.
APA, Harvard, Vancouver, ISO, and other styles
10

Baldini, Luca, and Benjamin Fumey. "Seasonal Energy Flexibility Through Integration of Liquid Sorption Storage in Buildings." Energies 13, no. 11 (2020): 2944. http://dx.doi.org/10.3390/en13112944.

Full text
Abstract:
The article estimates energy flexibility provided to the electricity grid by integration of long-term thermal energy storage in buildings. To this end, a liquid sorption storage combined with a compression heat pump is studied for a single-family home. This combination acts as a double-stage heat pump comprised of a thermal and an electrical stage. It lowers the temperature lift to be overcome by the electrical heat pump and thus increases its coefficient of performance. A simplified model is used to quantify seasonal energy flexibility by means of electric load shifting evaluated with a monthly resolution. Results are presented for unlimited and limited storage capacity leading to a total seasonal electric load shift of 631.8 kWh/a and 181.7 kWh/a, respectively. This shift, referred to as virtual battery effect, provided through long-term thermal energy storage is large compared to typical electric battery capacities installed in buildings. This highlights the significance of building-integrated long-term thermal energy storage for provision of energy flexibility to the electricity grid and hence for the integration of renewables in our energy system.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "Electrical storage"

1

Hughes, Morris. "Kinetic studies of electrical storage cells." Thesis, Loughborough University, 1985. https://dspace.lboro.ac.uk/2134/27952.

Full text
Abstract:
The thesis describes an investigation of the kinetics of certain electrochemical energy storage systems. The work mainly involves A.C. impedance measurements made over a wide frequency range on some primary and secondary cells. In a number of cases this was sufficient to establish the electrochemistry and evaluate the magnitudes of the circuit elements of the analogue for the cell. In some other cases (secondary cells) the electrode behaviours of anode and cathode had to be established in order to produce the composite cell behaviours.
APA, Harvard, Vancouver, ISO, and other styles
2

Hartnick, Megan Donna. "Evaluation of nuclear spent fuel dry storage casks and storage facility designs." Master's thesis, University of Cape Town, 2017. http://hdl.handle.net/11427/25279.

Full text
Abstract:
Koeberg Nuclear Power Station (KNPS) is the only nuclear power station in Africa and it stores its spent nuclear fuel (SNF) onsite in the spent fuel pool (SFP). Additional aged SNF assemblies are stored in dry storage casks in a facility located on the KNPS site. This minor research dissertation aims at evaluating various dry storage cask found in open literature. The dissertation provides an overview of cask types, heat transfer, radiation shielding and storage facility types. Specific criteria are required in the selection of casks and the storage facility to house the casks on site. The selection criteria for casks and the storage facility were determined and technically evaluated in this dissertation. The selected casks were evaluated in terms of SNF criticality, radiation shielding, decay heat removal and heat transfer. Other aspects also determined by calculation were the seismic stability of casks and the cask footprint. The results obtained show the relationship of the spent fuel (SF) packing density between the different casks. Different shielding materials are used in the casks and it aided the heat transfer process to take place with some casks having additional features which included cooling fins and air vents for adequate cooling of the SNF. Through these some trends could be identified which could be used in the selection or design of new storage casks. Recommendations for further study are to evaluate a greater range of casks to verify and improve upon the relationship of evaluated parameters that were shown in the technical evaluation. These casks should all have similar means of maintaining sub-criticality, shielding and heat removal in order to generate comparable results.
APA, Harvard, Vancouver, ISO, and other styles
3

Chung, Chanwoo S. M. Massachusetts Institute of Technology. "NOHOST : a new storage architecture for distributed storage systems." Thesis, Massachusetts Institute of Technology, 2016. http://hdl.handle.net/1721.1/107295.

Full text
Abstract:
Thesis: S.M., Massachusetts Institute of Technology, Department of Electrical Engineering and Computer Science, 2016.<br>This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.<br>Cataloged from student-submitted PDF version of thesis.<br>Includes bibliographical references (pages 53-55).<br>This thesis introduces a new NAND flash-based storage architecture, NOHOST, for distributed storage systems. A conventional flash-based storage system is composed of a number of high-performance x86 Xeon servers, and each server hosts 10 to 30 solid state drives (SSDs) that use NAND flash memory. This setup not only consumes considerable power due to the nature of Xeon processors, but it also occupies a huge physical space compared to small flash drives. By eliminating costly host servers, the suggested architecture uses NOHOST nodes instead, each of which is a low-power embedded system that forms a cluster of distributed key-value store. This is done by refactoring deep I/O layers in the current design so that refactored layers are light-weight enough to run seamlessly on resource constrained environments. The NOHOST node is a full-fledged storage node, composed of a distributed service frontend, key-value store engine, device driver, hardware flash translation layer, flash controller and NAND flash chips. To prove the concept of this idea, a prototype of two NOHOST nodes has been implemented on Xilinx Zynq ZC706 boards and custom flash boards in this work. NOHOST is expected to use half the power and one-third the physical space as compared to a Xeon-based system. NOHOST is expected to support the through of 2.8 GB/s which is comparable to contemporary storage architectures.<br>by Chanwoo Chung.<br>S.M.
APA, Harvard, Vancouver, ISO, and other styles
4

Nyström, Gustav. "Nanocellulose and Polypyrrole Composites for Electrical Energy Storage." Doctoral thesis, Uppsala universitet, Nanoteknologi och funktionella material, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-168664.

Full text
Abstract:
To meet the predicted increase in demand for energy storage in tomorrow's society, the development of inexpensive, flexible, lightweight and sustainable energy-storage materials is essential. In this respect, devices based on electroactive organic molecules, such as conducting polymers, are highly interesting. The aim of this thesis was to evaluate the use of nanocellulose as a matrix material in composites of cellulose and the electroactive polymer polypyrrole (PPy), and the use of these composites in all-polymer paper-based energy-storage devices.   Pyrrole was polymerized using FeCl3 onto cellulose nanofibers in the form of a hydrogel. The resulting PPy-coated fibers were washed with water and dried into a high surface area, conductive paper material. Variations in the drying technique provided a way of controlling the porosity and the surface area of wood-based cellulose nanofibers, as the properties of the cellulose were found to have a large influence on the composite structure. Different nanocellulose fibers, of algal and wood origin, were evaluated as the reinforcing phase in the conductive composites. These materials had conductivities of 1–6 S/cm and specific surface areas of up to 246 m2/g at PPy weight fractions around 67%.   Symmetrical supercapacitor devices with algae-based nanocellulose-PPy electrodes and an aqueous electrolyte showed specific charge capacities of around 15 mAh/g and specific capacitances of around 35 F/g, normalized with respect to the dry electrode weight. Potentiostatic charging of the devices was suggested as a way to make use of the rapid oxidation and reduction processes in these materials, thus minimizing the charging time and the effect of the IR drop in the device, and ensuring charging to the right potential. Repeated charging and discharging of the devices revealed a 10–20% loss in capacity over 10 000 cycles. Upon up-scaling of the devices, it was found that an improved cell design giving a lower cell resistance was needed in order to maintain high charge and discharge rates.   The main advantages of the presented concept of nanocellulose-PPy-based electrical energy storage include the eco-friendly raw materials, an up-scalable and potentially cost-effective production process, safe operation, and the controllable porosity and moldability offered by the nanocellulose fiber matrix. Integrating energy storage devices into paper could lead to un- precedented opportunities for new types of consumer electronics. Future research efforts should be directed at increasing the energy density and improving the stability of this type of device as well as advancing the fundamental understanding of the current limitations of these properties.
APA, Harvard, Vancouver, ISO, and other styles
5

Hakim, Jafar. "Application of electrical energy storage systems in Germany." Thesis, KTH, Energiteknik, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-148082.

Full text
Abstract:
This study addresses the possibilities and profits of taking advantages of price differences on the electricity market by using a electrical energy storage system (EES) in Germany. The analysis of which technique that is chosen for the purpose is made from two views, one that reflects only over the 4 technical aspects explained in the study and the second one is based on the German market demands where an analysis of the electricity price for 2013 is made. As we know we are moving towards a more sustainable society and with its path, problems will appear. One of the problems is well connected to the technique studied in this paper. The phase out of nuclear power that Germany is currently going through will have big impacts on how electricity will be produced in the future. Some of the electricity production will probably be generated by wind and solar power that will provide problems. With its incontrollable production of electricity and the electricity market as we know, the price differences of the electricity market will truly be greater than today and is more described by (Walsh, 2013; Caste, 2013). These differences in prices can be taken advantage of with an application of EES and not just be made into profit but help the electricity system to balance the production and consumption of the electricity in Germany.  Germany with its high elevations in landscape and electricity prices that do not vary rapidly has the perfect condition for an application of PHES system. That is one of 5 studied techniques in this report.  With the application of just a plant with a power of 2MW that can store twice as fast as generating electricity, profits can rise up to 80’000 € over a year. And with the possible savings of up to 10‘000‘000’000 € with the simple model made in the study, the advantages of electrical energy storage systems are proved.<br>Dagens elpris varierar med dygnet men också med årstiderna. Dessa skillnader i pris skapar möjlighet för vinster men måste också ses som ett problem då dessa skillnader kan vara större i framtiden på grund av en ökad andel förnyelsebara energikällor i produktionsmixen som är svårreglerbara. I denna rapport nämns fem olika typer av tekniker som är gjorda för lagring av elektrisk energi. Den första tekniken som nämns är CAES som är en teknik som bygger på att lagra energi i komprimerad luft. Denna teknik är lämpad för regional lagring, där dess styrka befinner sig i denna höga lagringskapacitet och höga verkningsgrad. Det som begränsar denna teknik är främst dess förmåga att inte kunna lagra och producera el snabbt i kombination med att den är starkt geografiskt anknuten till punkter där det finns gas som behövs i turbinen vid genereringen av elektricitet. Den andra typen av tekniken som nämns är PHES, som bygger på att man lagrar den elektriska energin som potentiell energi i vatten. För att återskapa elektrisk energin släpper man vattnet genom en turbin som i sin tur skapar elektricitet med hjälp av en generator. Denna tekniks fördelar är dess höga kapacitet och billig anläggningskostnad sett till dess kapacitet. Dess nackdelar är att den inte kan lagra och generera energi lika fort som andra tekniker kan men man kan anpassa generatorn och pumpen i systemet för att tillämpa tekniken efter marknadens behov. Den tredje typen av teknik som nämns i studien är batteriet. Denna typ av teknik har fått nytt liv på senare tid på grund av att den har ett flertal tillämpningsområden i det nya energieffektiva samhället som vi bygger upp. Dess användning i t.ex. elbilar har lett till intensiv forskning på området. Dessa synergier har lett till att man ser Lion batterier som ett perfekt komplement till större EES system i framtiden då batterier kan generar och lagra energi på sekunder men också för att de har en otroligt hög verkningsgrad. Det som håller tillbaka tekniken från att bryta igenom är dess kostnad. Den fjärde tekniken som nämns i studien är FEES. Denna teknik bygger på att lagra elektriska energin som kinetisk energi i ett svänghjul. Teknikens styrkor är bland annat att den kan lagra energi snabbt, men också för att tekniken är billig. Men svänghjulet kan inte lagra energi under längre perioder eftersom förlusterna är höga medan energin är lagrad i svänghjulet trots optimala förhållanden. Den sista tekniken som nämns i studien är TEES, som bygger på lagring i form av termisk energi. Denna teknik är en relativt outvecklad och inte så relevant för denna studie.  Resultaten i studien visar på att PHES är den bästa tekniken för Tyskland sett till de två olika typerna av analyser som gjorts, dels från vad Tysklands elmarknad har för behöv men också vad som rent tekniskt är bäst. Sett till de 4 aspekterna som är studerade. Med en applicering av en 2 MW anläggning som kan lagra energi dubbelt så snabbt som den producerar kan vinster uppgå upp till 80’000 €. Men den enkla modell som gjorts på slutet av studien av elmarknaden visar det sig att vinster på 10’000’000’000€ kan göras, vilket visar på potentialen som elektriska ellagringsystem har.
APA, Harvard, Vancouver, ISO, and other styles
6

Sokol, E. I., Volodymyr Zamaruiev, Bohdan Styslo, and Mykola Makhonin. "The Specificity of Electrical Energy Storage Unit Application." Thesis, IPM NASU, 2017. http://repository.kpi.kharkov.ua/handle/KhPI-Press/34105.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Al-Agele, Saif. "Electrical Power and Storage for NASA Next Generation Aircraft." Wright State University / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=wright1515632677356171.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Jayamaha, Prasanthi Charmalee. "Energy storage for frequency support in weak electrical grids." Thesis, University of Nottingham, 2015. http://eprints.nottingham.ac.uk/29104/.

Full text
Abstract:
INTEGRATING local renewable resources into the low voltage distribution system can create weak micro-grids with limited power capabilities and challenging control requirements. The low inertia in these micro-grids can result in significant frequency excursions when large load or generation changes are seen. Micro-grids may also be more susceptible to high harmonic distortion in their voltage due to non-negligible supply impedance. This calls for advance control techniques to regulate frequency and maintain voltage at the standards required of the utility grid. Failure to do so may incur disconnection of the weak grid from the main supply leading to cascading power disruptions to the consumers. This thesis explores one approach to improving the frequency control in weak grids in the presence of poor voltage quality by exploiting energy storage to independently and optimally dispatch active power to constrain frequency fluctuations within acceptable limits. Power system frequency - a direct indication of generation-demand imbalance -is selected as the main control signal in the energy storage control system. The energy storage injects active power when the frequency falls below the lower threshold and absorbs active power when the frequency rises above the upper threshold. Imposing thresholds close to but not equal to the nominal frequency allows a sufficient speed error for the conventional speed governor of the prime movers of the power system to operate unhindered and acquire the full control of the load at the equilibrium. Frequency control by the energy storage support combined with the continuous speed governing acts to restrict the frequency excursions within the thresholds well within the primary frequency time requirements. The power system frequency is detected directly from the measured supply voltage in order to eliminate the need for any communication between system elements and make the energy storage device plug and-play. This has meant the investigation of a suitable frequency tracker which can respond quickly, and at the same time operate correctly in the presence of high supply voltage distortion. Frequency detection introduces a transient delay and a steady state ripple to the estimated frequency. Hence, a set of frequency detection requirements are defined that must be satisfied by any candidate frequency detection method. In identifying the best technique(s), this thesis presents a comparative analysis of candidate frequency detection methods when applied specifically in a weak grid. The analysis revealed that the Double Second Order Generalised Integrator Frequency Locked Loop (DSOGI-FLL) displays optimum transient and steady state characteristics for the energy storage control application requirements, closely followed by a Discrete Fourier Transformation (DFT) technique generalised in the study. The proposed frequency trackers and energy storage control techniques were validated experimentally and tuning of the key parameters to match user requirements was presented for both single and multiple energy storage systems.
APA, Harvard, Vancouver, ISO, and other styles
9

Strauss, Jacob A. (Jacob Alo) 1979. "Device-transparent personal storage." Thesis, Massachusetts Institute of Technology, 2010. http://hdl.handle.net/1721.1/62459.

Full text
Abstract:
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2010.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (p. 83-87).<br>Users increasingly store data collections such as digital photographs on multiple personal devices, each of which typically presents the user with a storage management interface isolated from the contents of all other devices. The result is that collections easily become disorganized and drift out of sync. This thesis presents Eyo, a novel personal storage system that provides device transparency: a user can think in terms of "file X", rather than "file X on device Y", and will see the same set of files on all personal devices. Eyo allows a user to view and manage the entire collection of objects from any of their devices, even from disconnected devices and devices with too little storage to hold all the object content. Eyo separates metadata (application-specific attributes of objects) from the content of objects, allowing even storage-limited devices to store all metadata and thus provide device transparency. Fully replicated metadata allows any set of Eyo devices to efficiently synchronize updates. Applications can specify flexible placement rules to guide Eyo's partial replication of object contents across devices. Eyo's application interface provides first-class access to object version history. If multiple disconnected devices update an object concurrently, Eyo preserves each resulting divergent version of that object. Applications can then examine the history and either coalesce the conflicting versions without user direction, or incorporate these versions naturally into their existing user interfaces. Experiments using Eyo for storage in several example applications-media players, a photo editor, podcast manager, and an email interface-show that device transparency can be had with minor application changes, and within the storage and bandwidth capabilities of typical portable devices.<br>by Jacob Alo Strauss.<br>Ph.D.
APA, Harvard, Vancouver, ISO, and other styles
10

Falk, Matthew D. "Cryptographic cloud storage framework." Thesis, Massachusetts Institute of Technology, 2013. http://hdl.handle.net/1721.1/85417.

Full text
Abstract:
Thesis: M. Eng., Massachusetts Institute of Technology, Department of Electrical Engineering and Computer Science, 2013.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (page 59).<br>The cloud prevents cheap and convenient ways to create shared remote repositories. One concern when creating systems that provide security is if the system will be able to remain secure when new attacks are developed. As tools and techniques for breaking security systems advance, new ideas are required to provide the security guarantees that may have been exploited. This project presents a framework which can handle the ever growing need for new security defenses. This thesis describes the Key Derivation Module that I have constructed, including many new Key Derivation Functions, that is used in our system.<br>by Matthew D. Falk.<br>M. Eng.
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "Electrical storage"

1

Robyns, Benoît, Christophe Saudemont, Daniel Hissel, Xavier Roboam, Bruno Sareni, and Julien Pouget. Electrical Energy Storage in Transportation Systems. John Wiley & Sons, Inc., 2016. http://dx.doi.org/10.1002/9781119347736.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Novikov, Fedor. Lightning in a bottle: Electrical energy storage. Nova Science Publishers, 2011.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

service), SpringerLink (Online, ed. Energy Storage. Springer Science+Business Media, LLC, 2010.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

Demirel, Yaşar. Energy: Production, conversion, storage, conservation, and coupling. Springer, 2012.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

Kim, Younghyun, and Naehyuck Chang. Design and Management of Energy-Efficient Hybrid Electrical Energy Storage Systems. Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-07281-4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Engineers, Institution of Gas. Safety recommendations IGE/SR/3(1987): Electrical equipmentin gas production, transmission, storage anddistribution. Institution of Gas Engineers, 1987.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Symposium on Batteries for Portable Applications and Electrical Vehicles (1997 Paris, France). Proceedings of the Symposium on Batteries for Portable Applications and Electrical Vehicles. Edited by Holmes Curtis F, Landgrebe Albert R, Electrochemical Society Battery Division, Electrochemical Society. Energy Technology Division., and International Society of Electrochemistry. Electrochemical Energy Conversion Division. Electrochemical Society, Inc., 1997.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Truong, Long V. Simulation of a flywheel electrical system for aerospace applications. National Aeronautics and Space Administration, Glenn Research Center, 2000.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

Managing 12 volts: How to upgrade, operate, and troubleshoot 12 volt electrical systems. Summer Breeze Pub., 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

Bart, Florence. Cement-Based Materials for Nuclear Waste Storage. Springer New York, 2013.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "Electrical storage"

1

Shao, Han, Padmanathan Narayanasamy, Kafil M. Razeeb, Robert P. Lynch, and Fernando M. F. Rhen. "Electrical Storage." In Issues in Environmental Science and Technology. Royal Society of Chemistry, 2018. http://dx.doi.org/10.1039/9781788015530-00150.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Stadler, Ingo. "Electrical Energy Storage." In Handbook of Energy Storage. Springer Berlin Heidelberg, 2019. http://dx.doi.org/10.1007/978-3-662-55504-0_6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Hawthorne, Eric. "Electrical Storage System." In Smart Microgrids. CRC Press, 2016. http://dx.doi.org/10.1201/9781315372679-6.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Belhomme, Régine, Jérôme Duval, Gauthier Dellile, Gilles Malarange, Julien Martin, and Andrei Nekrassov. "Energy Storage for Electrical Systems." In Energy Storage. John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118557808.ch1.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Yang, Wen-Jei. "Electrical Energy Storage Battery." In Energy Storage Systems. Springer Netherlands, 1989. http://dx.doi.org/10.1007/978-94-009-2350-8_27.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Carr, M. "Electrical installations." In Cold and Chilled Storage Technology. Springer US, 1997. http://dx.doi.org/10.1007/978-1-4613-1127-0_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Louineau, Jean-Paul, Modibo Dicko, Peter Fraenkel, Roy Barlow, and Varis Bokalders. "5. Electrical Storage: Batteries." In Rural Lighting. Practical Action Publishing, 1994. http://dx.doi.org/10.3362/9781780445823.005.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Tiwari, G. N., Arvind Tiwari, and Shyam. "Energy Storage." In Energy Systems in Electrical Engineering. Springer Singapore, 2016. http://dx.doi.org/10.1007/978-981-10-0807-8_15.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Collinson, A. "The Costs and Benefits of Electrical Energy Storage." In Renewable Energy Storage. John Wiley & Sons, Ltd, 2014. http://dx.doi.org/10.1002/9781118903070.ch3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Morris, Noel M. "Energy Storage Elements." In Electrical Circuit Analysis and Design. Macmillan Education UK, 1993. http://dx.doi.org/10.1007/978-1-349-22560-6_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Electrical storage"

1

Huang, Chi-Fang, and Jhih-Yuan Wang. "Measurement evaluation of electromagnetic radiation from the electrical wiring in EVs." In Energy Storage. IEEE, 2011. http://dx.doi.org/10.1109/pesa.2011.5982913.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Pedram, Massoud, Naehyuck Chang, Younghyun Kim, and Yanzhi Wang. "Hybrid electrical energy storage systems." In the 16th ACM/IEEE international symposium. ACM Press, 2010. http://dx.doi.org/10.1145/1840845.1840924.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Brandeis, Leonhard, David Sprake, Yuriy Vagapov, and Hein Tun. "Analysis of electrical energy storage technologies for future electric grids." In 2016 IEEE NW Russia Young Researchers in Electrical and Electronic Engineering Conference (EIConRusNW). IEEE, 2016. http://dx.doi.org/10.1109/eiconrusnw.2016.7448235.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Dedes, Ioannis-Christos, Eleftherios Tsampasis, Charalambos Elias, and Panagiotis Gkonis. "Energy Storage in Smart Electrical Grids." In 2021 10th Mediterranean Conference on Embedded Computing (MECO). IEEE, 2021. http://dx.doi.org/10.1109/meco52532.2021.9460169.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Liu, Guangyu, Liangcai Wu, Tao Li, et al. "Microstructure and electrical properties of Sb2Te phase-change material." In 2016 International Workshop on Information Data Storage and Tenth International Symposium on Optical Storage, edited by Fuxi Gan and Zhitang Song. SPIE, 2016. http://dx.doi.org/10.1117/12.2246978.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Wang, Qing, Bo Liu, Yangyang Xia, et al. "Electrical properties of Cr-doped Sb2Te3 phase change material." In 2016 International Workshop on Information Data Storage and Tenth International Symposium on Optical Storage, edited by Fuxi Gan and Zhitang Song. SPIE, 2016. http://dx.doi.org/10.1117/12.2245039.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Senkader, S., M. M. Aziz, and C. D. Wright. "A model for phase-change process in GeSbTe thin-films used for optical and electrical data storage." In Optical Data Storage. OSA, 2003. http://dx.doi.org/10.1364/ods.2003.tua2.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Wijewardhana, K. Rohana, Amir Shahzad, E. N. Jayaweera, and Jang-Kun Song. "Electrical Energy form Rising Air Bubbles." In International Conference of Energy Harvesting, Storage, and Transfer. Avestia Publishing, 2018. http://dx.doi.org/10.11159/ehst18.117.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Buber, Tim, Serafin von Roon, Anna Gruber, and Jochen Conrad. "Demand Response potential of electrical heat pumps and electric storage heaters." In IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society. IEEE, 2013. http://dx.doi.org/10.1109/iecon.2013.6700475.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Bombik, Anthony, Sung Yeon Sara Ha, Amir Nasrollahi, Mohammad Faisal Haider, and Fu-Kuo Chang. "Mechanical-Electrical Behavior of Multifunctional Energy Storage Composites." In ASME 2021 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/imece2021-71456.

Full text
Abstract:
Abstract Multi-functional Energy Storage Composites (MESC) are composite sandwich structures where battery stack layers are placed between two layers of CFRP and sealed by low-density polyethylene (LDPE), forming a unified material. Because the layered Li-ion stacks have negligible out-of-plain shear stiffness, the two CFRP sheets on both sides of the battery are connected using LDPE rivets that pass through holes cut through the battery layers. The shear transfer mechanism of the rivets substantially enhances the shear stiffness and strength of the MESC. As the first step of preparing a guide for MESC design, the highly coupled mechanical and electrical behavior of MESC was studied through experiments. Several MESC cells were tested under three-point-bending loads. The load, deformation, and electric potential of the MESC were measured, and the electrical and mechanical failures were observed. A finite element model was developed to simulate the electro-chemo-mechanical coupling effect in MESC. In this model, a new constitutive relation of the battery material is proposed and verified by the experimental results. The resulting model can be used to simulate MESCs with various configurations and material properties to provide a design guideline of MESCs in multiple applications.
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Electrical storage"

1

Schenkman, Benjamin L., David Martin Rosewater, Steve Willard, et al. Electrical Energy Storage Data Submission Guidelines. Office of Scientific and Technical Information (OSTI), 2020. http://dx.doi.org/10.2172/1602954.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Schoenwetter, Howard K., Thomas F. Leedy, and Owen B. Laug. Electrical performance tests for storage oscilloscopes. National Institute of Standards and Technology, 1989. http://dx.doi.org/10.6028/nist.ir.89-4220.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Schoenwetter, Howard K., and Owen B. Laug. Electrical performance tests for storage oscilloscopes. National Institute of Standards and Technology, 1989. http://dx.doi.org/10.6028/nbs.ir.89-4220.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Rubloff, Gary, and Sangbok Lee. Nanostructures for Electrical Energy Storage (NEES). Office of Scientific and Technical Information (OSTI), 2020. http://dx.doi.org/10.2172/1696780.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Helms, C. R., K. J. Cho, John Ferraris, et al. Electrical Energy Storage for Renewable Energy Systems. Office of Scientific and Technical Information (OSTI), 2012. http://dx.doi.org/10.2172/1173064.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Meth, M. SYSTEM ANALYSIS OF ELECTRICAL ENERGY STORAGE SYSTEMS. Office of Scientific and Technical Information (OSTI), 1988. http://dx.doi.org/10.2172/1150507.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Rosewater, David, Yuliya Preger, Jacob Mueller, et al. Electrical Energy Storage Data Submission Guidelines, Version 2. Office of Scientific and Technical Information (OSTI), 2021. http://dx.doi.org/10.2172/1815349.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Doughty, Daniel Harvey, and Chris C. Crafts. FreedomCAR :electrical energy storage system abuse test manual for electric and hybrid electric vehicle applications. Office of Scientific and Technical Information (OSTI), 2006. http://dx.doi.org/10.2172/889934.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Muelaner, Jody Emlyn. Unsettled Issues in Electrical Demand for Automotive Electrification Pathways. SAE International, 2021. http://dx.doi.org/10.4271/epr2021004.

Full text
Abstract:
With the current state of automotive electrification, predicting which electrification pathway is likely to be the most economical over a 10- to 30-year outlook is wrought with uncertainty. The development of a range of technologies should continue, including statically charged battery electric vehicles (BEVs), fuel cell electric vehicles (FCEVs), plug-in hybrid electric vehicles (PHEVs), and EVs designed for a combination of plug-in and electric road system (ERS) supply. The most significant uncertainties are for the costs related to hydrogen supply, electrical supply, and battery life. This greatly is dependent on electrolyzers, fuel-cell costs, life spans and efficiencies, distribution and storage, and the price of renewable electricity. Green hydrogen will also be required as an industrial feedstock for difficult-to-decarbonize areas such as aviation and steel production, and for seasonal energy buffering in the grid. For ERSs, it is critical to understand how battery life will be affected by frequent cycling and the extent to which battery technology from hybrid vehicles can be applied. Unsettled Issues in Electrical Demand for Automotive Electrification Pathways dives into the most critical issues the mobility industry is facing.
APA, Harvard, Vancouver, ISO, and other styles
10

Spoerke, Erik David, Leo J. Small, Virginia Alison Vandelinder, et al. Programmable Nanocomposite Membranes for Ion-Based Electrical Energy Storage. Office of Scientific and Technical Information (OSTI), 2016. http://dx.doi.org/10.2172/1599531.

Full text
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography