Log in

Relevant bibliographies by topics / Electrical strength / Journal articles

To see the other types of publications on this topic, follow the link: Electrical strength.

Journal articles on the topic 'Electrical strength'

Author: Grafiati

Published: 3 June 2025

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 journal articles for your research on the topic 'Electrical strength.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse journal articles on a wide variety of disciplines and organise your bibliography correctly.

1

Walter, Ella, Maximilian Rapp, and Frank Kern. "Spark Plasma Sintering of Electric Discharge Machinable 1.5Yb-1.5Sm-TZP-WC Composites." Journal of Manufacturing and Materials Processing 6, no. 2 (2022): 28. http://dx.doi.org/10.3390/jmmp6020028.

Full text

Abstract:

Electrically conductive zirconia tungsten carbide composites are attractive materials for manufacturing precision components by electrical discharge machining due to their high strength, toughness and electrical conductivity. In this study, nanocomposite ceramics with a ytterbia samaria co-stabilized zirconia 1.5Yb-1.5Sm-TZP matrix and 24–32 vol.% tungsten carbide dispersion were manufactured by spark plasma sintering (SPS) at 1400 °C for 15 min at 60 MPa pressure. The materials exhibited high strengths of 1300–1600 MPa, a moderate fracture resistance of 6 MPa√m and an ultrafine microstructure

APA, Harvard, Vancouver, ISO, and other styles

2

Hestrin, S. "The Strength of Electrical Synapses." Science 334, no. 6054 (2011): 315–16. http://dx.doi.org/10.1126/science.1213894.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Varlow, B. R. "Mechanical prestressing improves electrical strength." IEEE Electrical Insulation Magazine 18, no. 1 (2002): 12–15. http://dx.doi.org/10.1109/57.981323.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Haas, Julie S., and Carole E. Landisman. "Bursts modify electrical synaptic strength." Brain Research 1487 (December 2012): 140–49. http://dx.doi.org/10.1016/j.brainres.2012.05.061.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Hong, Fang-Yu, Jing-Li Fu, Yan Wu, and Zhi-Yan Zhu. "Electrical control of strong spin-phonon coupling in a carbon nanotube." Quantum Information and Computation 17, no. 1&2 (2017): 117–24. http://dx.doi.org/10.26421/qic17.1-2-7.

Full text

Abstract:

We describe an approach to electrically control the strong interaction between a single electron spin and the vibrational motion of a suspended carbon nanotube resonator. The strength of the deflection-induced spin-phonon coupling is dependent on the wavefunction of the electron confined in a lateral carbon nanotube quantum dot. An electrical field along the nanotube shifts the effective center of the quantum dot, leading to the corresponding modification of the spin-phonon strength. Numerical simulations with experimentally reachable parameters show that high fidelity quantum state transfer b

APA, Harvard, Vancouver, ISO, and other styles

6

Sumaila, M., M. Dauda, and A. Aliyu. "ELECTRICAL AND MECHANICAL PROPERTIES OF MONTMORILLONITE CLAY/POLYESTER NANOCOMPOSITE." Journal of Metallurgy and Materials Engineering 8, no. 1 (2024): 32–40. http://dx.doi.org/10.62934/jmme.8.1.2013.32-40.

Full text

Abstract:

The dielectric and mechanical properties of montmorillonite clay/polyester nanocomposite at various filler loadings were investigated. Five different samples of the nanocomposite were produced using melt interclation method while varying the percentage composition of montmorillonite clay from 5wt% to 25wt%. The tensile, compressive, and flexural strengths and impact energy on five replicate specimens for each test were analysed. Also the capacitance and dielectric strength of the samples were evaluated. Results obtained showed that whereas a drastic decrease in the impact energy of >100% wa

APA, Harvard, Vancouver, ISO, and other styles

7

Rich, N., T. Guffey, C. Hansen, and C. Elsey. "LOW FREQUENCY ELECTRICAL STIMULATION AND STRENGTH." Medicine & Science in Sports & Exercise 24, Supplement (1992): S109. http://dx.doi.org/10.1249/00005768-199205001-00652.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Harris, J. R., M. Kendig, B. Poole, D. M. Sanders, and G. J. Caporaso. "Electrical strength of multilayer vacuum insulators." Applied Physics Letters 93, no. 24 (2008): 241502. http://dx.doi.org/10.1063/1.3054344.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

SÁNCHEZ, BERNARDO REQUENA, PAULINO PADIAL PUCHE, and JUAN JOSÉ GONZÁLEZ-BADILLO. "PERCUTANEOUS ELECTRICAL STIMULATION IN STRENGTH TRAINING." Journal of Strength and Conditioning Research 19, no. 2 (2005): 438–48. http://dx.doi.org/10.1519/00124278-200505000-00033.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Pereda, Alberto E. "The Variable Strength of Electrical Synapses." Neuron 90, no. 5 (2016): 912–14. http://dx.doi.org/10.1016/j.neuron.2016.05.031.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Kuzmin, S. V., P. Sáha, N. T. Sudar, et al. "Electrical strength of thin polyaniline films." Thin Solid Films 516, no. 8 (2008): 2181–87. http://dx.doi.org/10.1016/j.tsf.2007.07.138.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Kaplan, A. M., N. I. Chekunaev, L. V. Bezhikina, and V. G. Nikolskii. "Composite papers with enhanced electrical strength." Composites Science and Technology 51, no. 3 (1994): 325–29. http://dx.doi.org/10.1016/0266-3538(94)90102-3.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Kuyukov, Sergey A., Peter U. Tretyakov, Alexander A. Testeshev, Alexey V. Zamyatin, and Alexander A. Zhigailov. "Electrically conductive cement concrete using graphite." Architecture, Construction, Transport, no. 4(110) (2024): 77–87. https://doi.org/10.31660/2782-232x-2024-4-77-87.

Full text

Abstract:

In civil and road construction, the service life of structures is heavily influenced by the quality and properties of the construction and road-building materials used. Improving the properties of existing and commonly used materials, particularly concrete, is a high research priority. This work aims to produce electrically conductive concrete using carbonaceous additives and to assess the effect of these additives on compressive strength. The research focused on cement concrete mixes containing graphite. Laboratory testing was conducted in four stages. In the first stage, B15 concrete mixes w

APA, Harvard, Vancouver, ISO, and other styles

14

Sayegh, Michael N., Natasha Fernandez, and Hee Cheol Cho. "Strength-duration relationship as a tool to prioritize cardiac tissue properties that govern electrical excitability." American Journal of Physiology-Heart and Circulatory Physiology 317, no. 1 (2019): H13—H25. http://dx.doi.org/10.1152/ajpheart.00161.2019.

Full text

Abstract:

Gaps exist in the availability of in vitro functional assessment tools that can emulate the integration of regenerative cells and tissues to the host myocardium. We use strength-duration relationships of electrically stimulated two- and three-dimensional myocardial constructs to study the effects of pacing frequency, culture dimensions, anisotropic cell alignment, fibroblast content, and pacemaker phenotype on electrical excitability. Our study delivers electrical strength-duration as a quantifiable parameter to evaluate design parameters of engineered cardiac tissue constructs.

APA, Harvard, Vancouver, ISO, and other styles

15

Wang, Hangyang, Kaiwei Gong, Bingling Cheng, Xi Peng, Hui Wang, and Bin Xu. "Effect of Chloride Salt Erosion on the Properties of Straw Fiber Reactive Powder Concrete." Coatings 14, no. 8 (2024): 1069. http://dx.doi.org/10.3390/coatings14081069.

Full text

Abstract:

Straw fibers are renowned for their cost-effectiveness, sustainability, and durability. They represent a promising natural reinforcement option for reactive powder concrete (RPC). This paper investigated the impact of straw fibers on RPC’s workability, mechanical performance (mechanical strength and flexural toughness), and electrical properties (electrical resistance and AC impedance spectroscopy curves). The straw fiber volumes ranged from 1% to 4.0% of the total RPC volume. Specimens were cured under standard curing conditions for 3, 7, 14, and 28 days. Mechanical and electrical properties

APA, Harvard, Vancouver, ISO, and other styles

16

Blaschke, Daniel N., John S. Carpenter, and Abigail Hunter. "Predicting Electrical Conductivity in Bi-Metal Composites." Materials 17, no. 20 (2024): 5049. http://dx.doi.org/10.3390/ma17205049.

Full text

Abstract:

Generating high magnetic fields requires materials with not only high electric conductivity but also good strength properties in order to withstand the necessarily strong Lorentz forces. A number of bi-metal composites, most notably Cu/Nb, are considered to be good candidates for this purpose. Here, we generalize our previous work on Cu/Nb in order to predict, from theory, the dependence of electric conductivity on the microstructure and volume fraction of the less conductive component for a number of other bi-metal composites. Together with information on strength properties (taken from previ

APA, Harvard, Vancouver, ISO, and other styles

17

NAGAO, Takumi, Hiroto UENO, Koichi AKITA, Takashi ABE, and Hiromitsu WATANABE. "Fatigue Strength of Punched High-strength Non-oriented Electrical Steel Sheets." Proceedings of Mechanical Engineering Congress, Japan 2021 (2021): J031–09. http://dx.doi.org/10.1299/jsmemecj.2021.j031-09.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Sharp, A. A., L. F. Abbott, and E. Marder. "Artificial electrical synapses in oscillatory networks." Journal of Neurophysiology 67, no. 6 (1992): 1691–94. http://dx.doi.org/10.1152/jn.1992.67.6.1691.

Full text

Abstract:

1. We use an electronic circuit to artificially electrically couple neurons. 2. Strengthening the coupling between an oscillating neuron and a hyperpolarized, passive neuron can either increase or decrease the frequency of the oscillator depending on the properties of the oscillator. 3. The result of electrically coupling two neuronal oscillators depends on the membrane potentials, intrinsic properties of the neurons, and the coupling strength. 4. The interplay between chemical inhibitory synapses and electrical synapses can be studied by creating both chemical and electrical synapses between

APA, Harvard, Vancouver, ISO, and other styles

19

Li, Yu Xian, Yin Tian Fu, Anita Hu, Xue Yuan Nie, and Henry Hu. "Effect of Sr and Ni Addition on Microstructure, Tensile Behavior and Electrical Conductivity of Squeeze Cast Al-6Si-3Cu Al Alloy." Key Engineering Materials 921 (May 30, 2022): 3–14. http://dx.doi.org/10.4028/p-045ngi.

Full text

Abstract:

Mechanical strengths and electrical conductivity are the very important engineering properties of lightweight aluminum (Al) alloys used in automobiles, especially for battery-powered electric vehicles (BEV). However, the main issue is that the mechanical properties and the electrical conductivity of Al alloys are mutually exclusive. This study aims to simultaneously improve both the tensile properties and the electrical conductivity of the squeeze as-cast Al-6wt% Si-3wt% Cu by modifying its microstructure with the addition of nickel (Ni) and strontium (Sr). In comparison to those of the alloy

APA, Harvard, Vancouver, ISO, and other styles

20

Shikagawa, Takahiro, Goroh Itoh, Shunsuke Suzuki, Hiromitsu Kuroda, and Toshiyuki Horikoshi. "Effect of Small Additions of Fe on the Tensile Properties and Electrical Conductivity of Aluminium Wires." Materials Science Forum 519-521 (July 2006): 515–18. http://dx.doi.org/10.4028/www.scientific.net/msf.519-521.515.

Full text

Abstract:

Although low-alloyed aluminum has been used as electric line and cable materials to date, there still is a great demand for higher strength with retaining the good electrical conductivity and ductility. In the study, iron has been chosen as an additive element and the addition effect on the strength and electrical has been investigated since iron is reported to have a marked solution-strengthening effect at a given addition amount. Aluminum with 99.99mass% purity and Al-Fe alloys with iron up to 0.9mass% were induction-melted, continuously cast into a rod with 8mm diameter, and cold-drawn into

APA, Harvard, Vancouver, ISO, and other styles

21

Debanne, Dominique, and Michaël Russier. "How do electrical synapses regulate their strength?" Journal of Physiology 595, no. 13 (2017): 4121–22. http://dx.doi.org/10.1113/jp274316.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Rabie, M., D. A. Dahl, S. M. A. Donald, M. Reiher, and C. M. Franck. "Predictors for gases of high electrical strength." IEEE Transactions on Dielectrics and Electrical Insulation 20, no. 3 (2013): 856–63. http://dx.doi.org/10.1109/tdei.2013.6518955.

Full text

APA, Harvard, Vancouver, ISO, and other styles

23

Hortobágyi, Tibor, and Nicola A. Maffiuletti. "Neural adaptations to electrical stimulation strength training." European Journal of Applied Physiology 111, no. 10 (2011): 2439–49. http://dx.doi.org/10.1007/s00421-011-2012-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

24

Zhou, Jianyou, Liying Jiang, and Shengqiang Cai. "Predicting the electrical breakdown strength of elastomers." Extreme Mechanics Letters 34 (January 2020): 100583. http://dx.doi.org/10.1016/j.eml.2019.100583.

Full text

APA, Harvard, Vancouver, ISO, and other styles

25

Nasr, Danial, and Ehsan Bavafa. "Electrically Conductive Roller-Compacted Concrete (RCC) Containing BOFS, Steel Fiber, and Steel Shaving." Advances in Civil Engineering 2023 (March 17, 2023): 1–12. http://dx.doi.org/10.1155/2023/6036906.

Full text

Abstract:

In this study, the feasibility of using steel fibers and steel shavings in roller-compacted concrete containing coarse basic oxygen furnace slag aggregate was investigated in order to improve its mechanical properties and to produce an electrically conductive and environment-friendly concrete. For this purpose, various samples containing 0.4, 0.7, and 1% of steel fiber and 3, 5, and 7% of steel shaving were fabricated. The compressive strength, indirect tensile strength, electrical resistance, and specific density tests were conducted on the samples. The results demonstrated the positive effec

APA, Harvard, Vancouver, ISO, and other styles

26

King, Julia A., Michael D. Via, Faith A. Morrison, et al. "Characterization of exfoliated graphite nanoplatelets/polycarbonate composites: electrical and thermal conductivity, and tensile, flexural, and rheological properties." Journal of Composite Materials 46, no. 9 (2011): 1029–39. http://dx.doi.org/10.1177/0021998311414073.

Full text

Abstract:

Exfoliated graphite nanoplatelets (GNP) can be added polymers to produce electrically conductive composites. In this study, varying amounts (2–15 wt%) GNP were added to polycarbonate (PC) and the resulting composites were tested for electrical conductivity (1/electrical resistivity), thermal conductivity, and tensile, flexural, and rheological properties. The percolation threshold was approximately 4.0 vol% (6.5 wt%) GNP. The addition of GNP to polycarbonate increased the composite electrical and thermal conductivity and tensile and flexural modulus. The 8 wt% (5.0 vol%) GNP in polycarbonate c

APA, Harvard, Vancouver, ISO, and other styles

27

Kalabina, Daria, Grigory Ivanovich Yakovlev, Zarina Saidova, Grigorii Pervushin, and Anastasiya Fedorovna Gordina. "Effect of Carbon-Containing Additives on the Properties of Fluoroanhydrite Compositions Used for Flooring." Key Engineering Materials 932 (September 20, 2022): 219–24. http://dx.doi.org/10.4028/p-1q9dt3.

Full text

Abstract:

The effect of carbon-containing additives on the physical, mechanical and electrical properties of the fluoroanhydrite composition used for self-leveling floors has been investigated. Copper/carbon nanocomposite, crushed technogenic graphite and thermally expanded graphite were used as modifying additives in this research. A method for obtaining thermally expanded graphite was described; the efficiency of its introduction into the plasticized fluoroanhydrite composition was proven: the electrical resistance of the material decreased by 11 times with an insignificant drop in strength on the 7th

APA, Harvard, Vancouver, ISO, and other styles

28

Loskutov, Viktor A., Yakov G. Prokopenko, Alexander V. Rydel, and Ludmila P. Goreva. "Influence of nano-oil preparation conditions on its electrical strength." Vestnik of Samara State Technical University. Technical Sciences Series 31, no. 3 (2024): 83–97. http://dx.doi.org/10.14498/tech.2023.3.6.

Full text

Abstract:

This study presents the results of experiments aimed at determining the breakdown voltage of liquids containing carbon nanotubes and other microinclusions; which were dispersed in mineral insulating oil used in electrical transformers. The liquid was obtained by various methods with the mandatory use of ultrasonic dispersant. The electrical strength of the carbon nanotube-based nano-oil was found to be significantly less than the electrical strength of the zinc and titanium nano-oxide-based nano-oil. At low concentrations the values of electrical strength approximately correspond to the values

APA, Harvard, Vancouver, ISO, and other styles

29

Valenta, László, and Attila Bojtos. "Mechanical and Electrical Testing of Electrically Conductive Silicone Rubber." Materials Science Forum 589 (June 2008): 179–84. http://dx.doi.org/10.4028/www.scientific.net/msf.589.179.

Full text

Abstract:

Silicone rubber is an essential construction material in food industry, medicine and in some fields of mechanical engineering, because it has good mechanical, electrical, biological and other special properties. One needs to know these material properties in order to develop silicone sensors. We performed several standard measurements for rubber, like tensile strength, cyclic tensile, bending, fatiguing, stress relaxation tests etc. To investigate the electrical properties, we measured the resistance of silicone during the mechanical tests. The paper summarizes the newest results of our resear

APA, Harvard, Vancouver, ISO, and other styles

30

Lo, K. Y., J. Q. Shang, and I. I. Inculet. "Electrical strengthening of clays by dielectrophoresis." Canadian Geotechnical Journal 31, no. 2 (1994): 192–203. http://dx.doi.org/10.1139/t94-025.

Full text

Abstract:

The theory of dielectrophoresis in clay–water–electrolyte systems is developed in this paper. Dielectrophoresis is the motion of particles generated by a nonuniform electric field. The dielectrophoretic forces on clay particles are determined by the effective polarizability and configuration of the nonuniform electric field. In most clay–water–electrolyte systems, including natural clays, the dielectrophoretic forces are directed towards the lower field intensity, determined by the negative polarizability. In the experimental program, an ac voltage of 60 Hz and 15 kV was applied through insula

APA, Harvard, Vancouver, ISO, and other styles

31

Gusev, E. V., N. A. Naboyshchikova, and T. A. Ageeva. "Study of a complex of functional properties of phenolic composites using a dispersed fibrous filler." Plasticheskie massy 1, no. 1-2 (2023): 14–16. http://dx.doi.org/10.35164/0554-2901-2023-1-2-14-16.

Full text

Abstract:

The article presents the results of studies of basic physical, mechanical, tribological and electrotechnical properties of composite thermosetting polymeric materials having optimal composition based on solid resin phenol formaldehyde resins and dispersed fibrous filler obtained by mechanical recycling of cellulose fibrous waste products of pulp and paper industry. Physical and mechanical properties (density, tensile and bending strengths, impact strength, degree of absorption for moisture and mineral oil), tribological indicators (wear intensity and stability, friction coefficients in the con

APA, Harvard, Vancouver, ISO, and other styles

32

Xu, Bowen, Hui Li, Dan V. Bompa, Ahmed Y. Elghazouli, and Jiangbo Chen. "Performance of Polymer Cementitious Coatings for High-Voltage Electrical Infrastructure." Infrastructures 6, no. 9 (2021): 125. http://dx.doi.org/10.3390/infrastructures6090125.

Full text

Abstract:

This paper investigates the electrical, thermal and mechanical properties as well as the environmental performance of polymer cementitious composites (PCCs) as sustainable coating materials for underground power cables and as high-voltage insulators. Particular focus is placed on the optimised mix design and the effect of the manufacturing method on the performance of PCCs, incorporating liquid styrene and acrylic (SA) monomers, wollastonite and muscovite. Microstructural investigations, together with results from strength tests, indicate that the manufacturing method is a key performance para

APA, Harvard, Vancouver, ISO, and other styles

33

Pang, Li Juan, Gang Deng, Xue Feng Zhang, et al. "The Influence of Cu on the Electrical Properties of Ti(C, N)-Based Cermets." Advanced Materials Research 399-401 (November 2011): 792–95. http://dx.doi.org/10.4028/www.scientific.net/amr.399-401.792.

Full text

Abstract:

Cermets Ti(C，N)80%Co(10-x)% TiC10% Cux%(wt%，x=0，1，2，3， 4， 5) were prepared by powder metallurgy method under vacuum condition at 1500°C and the effects of Cu element to the electrical resistivity and flexural strength were studied in this paper. It turns out the electrical resistivity of the samples obviously decreases with the introduction of Cu element, but the electrical resistivity of the samples increases when the amount of Cu element in the samples becomes more. The flexural strengths of the samples decrease with the amount of Cu element increasing. Ti（C，N）80% Co9%TiC10% Cu1% shows the l

APA, Harvard, Vancouver, ISO, and other styles

34

Yu, Xiao Hua, Ning Fang, Yong Gang Li, Gang Xie, and Lin Tian. "Effect of Additive Silicon Powder on Physical Property of Cold Ramming Paste for Aluminum Electrolysis." Key Engineering Materials 512-515 (June 2012): 421–24. http://dx.doi.org/10.4028/www.scientific.net/kem.512-515.421.

Full text

Abstract:

The cold ramming paste for aluminum electrolysis has been studied using electrically calcined anthracite as aggregate, medium temperature pitch and anthracene oil as binder, metallic silicon powder as additive in the paper. The effects of addition of silicon on volume density, compressive strength, electrical resistivity, shrinkage value have been studied. The results show that: volume density, compressive strength of cold ramming paste are increased firstly and then decreased with the addition of silicon increasing, and electrical resistivity, shrinkage value are decreased firstly and then in

APA, Harvard, Vancouver, ISO, and other styles

35

Malyushevska, A. P., S. O. Toporov, and V. І. Gunko. "LONG-TERM ELECTRICAL STRENGTH OF POLYMER FILMS UNDER THE ELECTRICAL FIELD INFLUENCE." Electrical Engineering and Power Engineering, no. 1 (July 14, 2017): 12–17. http://dx.doi.org/10.15588/1607-6761-2017-1-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

36

Cheng, Po-Wei, Tomoyuki Kurioka, Chun-Yi Chen, et al. "Platinum Metallization of Polyethylene Terephthalate by Supercritical Carbon Dioxide Catalyzation and the Tensile Fracture Strength." Materials 16, no. 6 (2023): 2377. http://dx.doi.org/10.3390/ma16062377.

Full text

Abstract:

Polyethylene terephthalate (PET) is known to be highly inert, and this makes it difficult to be metallized. In addition, Pt electroless plating is rarely reported in the metallization of polymers. In this study, the metallization of biocompatible Pt metal is realized by supercritical CO2 (sc-CO2)-assisted electroless plating. The catalyst precursor used in the sc-CO2 catalyzation step is an organometallic compound, palladium (II) acetylacetonate (Pd(acac)2). The electrical resistance is evaluated, and a tape adhesion test is utilized to demonstrate intactness of the Pt layer on the PET film. T

APA, Harvard, Vancouver, ISO, and other styles

37

Landfried, Richard, Frank Kern, and Rainer Gadow. "Electrical Discharge Machining of Alumina-Zirconia-TiC Composites with Varying Zirconia Content." Key Engineering Materials 554-557 (June 2013): 1916–21. http://dx.doi.org/10.4028/www.scientific.net/kem.554-557.1916.

Full text

Abstract:

Ceramic injection molding (CIM) or extrusion requires molds and dies with high hardness to reduce tool wear which occurs due to processing of highly abrasive ceramic compounds. Besides the wear resistance high strength and toughness are necessary for mold materials to withstand the loads during application. Recent work of the authors has shown the high potential of electrical discharge machinable ceramic composites based on oxide ceramic matrices for high wear applications. The use of alumina zirconia composites (AZC) as matrix for electrically conductive composites enables the combination of

APA, Harvard, Vancouver, ISO, and other styles

38

Li, Mi Dan, and Dong Mei Liu. "Mechanical and Electrical Properties of Graphite/Carbon Fiber/Phenolic Resin Composite." Advanced Materials Research 418-420 (December 2011): 1452–55. http://dx.doi.org/10.4028/www.scientific.net/amr.418-420.1452.

Full text

Abstract:

Composites made of phenolic resin filled with natural graphite platelets and carbon fibers are fabricated by mechanical mixing, followed by compression molding. The flexural strength and electrical conductivity of composite are analyzed to determine the influence of phenolic resin and carbon fiber on mechanical and electrical properties. It is found that there is a marked dependence of the electrical conductivity and flexural strength on phenolic resin content. The electrical conductivity decreases and flexural strength increases with the increasing of phenolic resin loading. The presence of c

APA, Harvard, Vancouver, ISO, and other styles

39

Lai, Yong, Yan Liu, and Dao Xun Ma. "The Influence of Preparation Method and Electrode on Properties of Carbon Fiber Electrically Conductive Concrete." Applied Mechanics and Materials 584-586 (July 2014): 1035–38. http://dx.doi.org/10.4028/www.scientific.net/amm.584-586.1035.

Full text

Abstract:

This paper studied the influence of preparation method and electrode on properties of carbon fiber electrically conductive concrete by testing flexural strength and electrical resistance. Carbon fiber electrically conductive concrete is prepared by using dry mix method and wet mix method, the electrodes of which are stainless steel mesh and stainless steel sheet. The results show that the wet mix method of carbon fiber electrically conductive concrete is better than the dry mix method. The stainless steel sheet used as electrode in electrically conductive concrete is better than the stainless

APA, Harvard, Vancouver, ISO, and other styles

40

Gao, Lian, Xi Hai Jin, Jing Guo Li, Takafumi Kusunose, and Koichi Niihara. "Multifunctional BN/Si₃N₄ and TiN/Si₃N₄ Nanocomposites Prepared by In Situ Nitridation Method." Key Engineering Materials 336-338 (April 2007): 2247–50. http://dx.doi.org/10.4028/www.scientific.net/kem.336-338.2247.

Full text

Abstract:

Machinable BN/Si3N4 and electroconductive TiN/Si3N4 nanocomposites were prepared, using powders synthesized through an in-situ nitridation method in flowing ammonia gas. Due to the homogeneous mixing of various components in the powders, nanocomposites with homogeneous second phase distribution in the matrix were obtained. These nanocomposites showed enhanced strengths and distinctive functionalities. BN/Si3N4 nanocomposite with 20-25vol% BN showed a relatively high strength of over 700 MPa and was able to be machined into complicated shapes with diamond bits. Electroconductive TiN/Si3N4 nanoc

APA, Harvard, Vancouver, ISO, and other styles

41

Czech, Zbigniew, Robert Pełech, Agnieszka Kowalczyk, Arkadiusz Kowalski, and Rafał Wróbel. "Electrically conductive acrylic pressure-sensitive adhesives containing carbon black." Polish Journal of Chemical Technology 13, no. 4 (2011): 77–81. http://dx.doi.org/10.2478/v10026-011-0053-2.

Full text

Abstract:

Electrically conductive acrylic pressure-sensitive adhesives containing carbon black Acrylic pressure-sensitive adhesives (PSA) are non electrical conductive materials. The electrical conductivity is incorporated into acrylic self-adhesive polymer after adding electrically conductive additives like carbon black, especially nano carbon black. After an addition of electrical conductive carbon black, the main and typical properties of pressure-sensitive adhesives such as tack, peel adhesion and shear strength, are deteriorated. The investigations reveals that the acrylic pressure-sensitive adhesi

APA, Harvard, Vancouver, ISO, and other styles

42

Anjaneyulu, Roniki. "Experimental Investigation and Comparison of Electrical Waste Copper Wire Fibre and Electrical Waste Glass Fibre Concretes." International Journal of Advance Research and Innovation 9, no. 3 (2021): 51–56. http://dx.doi.org/10.51976/ijari.932108.

Full text

Abstract:

Fibre-reinforced concrete (FRC) contains fibrous material which upsurges its structural integrity. The use of irregular arrangement of fibres to concrete altogether upgrades its essential characteristics, for instance, influence quality, static flexural strength, elasticity and flexural stiffness. Filaments are further added to cement to control breaking because of plastic shrinkage and to drying shrinkage. This research paper shows and compare the use of electrical waste copper wire fibre and electrical waste glass fibre of various percentages of volume fractions such as 0.25%, 0.5%, 0.75%, 1

APA, Harvard, Vancouver, ISO, and other styles

43

Tian, Ye, Xian Yu Jin, Yuan Zhan, and Nan Guo Jin. "Mechanical and Microstructure Characterization of Fresh High- and Normal- Strength Concrete with Non-Contact Electrical Resistivity Measurement." Advanced Materials Research 250-253 (May 2011): 122–30. http://dx.doi.org/10.4028/www.scientific.net/amr.250-253.122.

Full text

Abstract:

This paper reports the investigation on both high and normal strength concrete using a non-contact electrical resistivity facility. The bulk resistivity development (ρ(t)-t curves) of the fresh concretes was evaluated from casting to 72h. The relationship between the electrical resistivity and the pore structure obtained from mercury intrusion porosimetry (MIP) method was analyzed. And the compressive strength evolution of fresh high- and normal- strength concrete was studied based on the bulk resistivity at early ages. The experiment results indicated a linear relationship between the fractio

APA, Harvard, Vancouver, ISO, and other styles

44

Salazar-Guapuriche, Manuel A., Y. Y. Zhao, Adam Pitman, and Andrew Greene. "Correlation of Strength with Hardness and Electrical Conductivity for Aluminium Alloy 7010." Materials Science Forum 519-521 (July 2006): 853–58. http://dx.doi.org/10.4028/www.scientific.net/msf.519-521.853.

Full text

Abstract:

The tensile strength, proof strength, hardness and electrical conductivity of Al alloy 7010 under different temper and ageing conditions were investigated with the aim to correlate strength with hardness and electrical conductivity so that the strength of the alloy can be determined nondestructively. Following the solutionising treatment, continuous age hardening was performed on a series of test coupons, taken from a large plate, to produce a wide range of precipitation hardening conditions, which gave rise to progressive variations of strength, hardness and conductivity. The relationship bet

APA, Harvard, Vancouver, ISO, and other styles

45

Wei, Huili, Guofeng Chang, Sichuan Xu, and Jinling Liu. "Muti-Filler Composites Reinforced with Multiwalled Carbon Nanotubes and Chopped Carbon Fibers for the Bipolar Plate of Fuel Cells." Energies 17, no. 7 (2024): 1603. http://dx.doi.org/10.3390/en17071603.

Full text

Abstract:

To improve the conductivity and flexural strength of bipolar plates for proton-exchange membrane fuel cells, multi-filler-reinforced composites were prepared using graphite, multiwalled carbon nanotubes (MWCNTs), chopped carbon fibers (CCFs), and phenolic resin (PF). The effects of CCF content (0–6 wt.%) and MWCNT content (0–8 wt.%) on the flexural strength, electrical conductivity, interfacial contact resistance (ICR), density, hydrophobicity, and corrosion behavior of the composites were investigated. Results showed that the addition of a small number of CCFs (≤4 wt.%) effectively improved t

APA, Harvard, Vancouver, ISO, and other styles

46

Zou, Runhao, Jian Hao, and Ruijin Liao. "Space/Interface Charge Analysis of the Multi-Layer Oil Gap and Oil Impregnated Pressboard Under the Electrical-Thermal Combined Stress." Energies 12, no. 6 (2019): 1099. http://dx.doi.org/10.3390/en12061099.

Full text

Abstract:

In oil-paper insulation systems, it is easy to accumulate space/interface charge under a direct current (DC) electrical field. At present, direct measurement of space/interface charge for a thick multi-layer insulation system is not possible. It is necessary to study the multi-layer oil-paper insulation system via simulation method. In this paper, the space/interface charge simulation based on the bipolar charge transport model and a simulation parameter using FEM for the multi-layer oil–paper insulation system was proposed. The influence of electrical field strength, temperature, and the comb

APA, Harvard, Vancouver, ISO, and other styles

47

Lu, L. "Ultrahigh Strength and High Electrical Conductivity in Copper." Science 304, no. 5669 (2004): 422–26. http://dx.doi.org/10.1126/science.1092905.

Full text

APA, Harvard, Vancouver, ISO, and other styles

48

Huang, Jianwen, Yuanxiang Zhou, Zhongliu Zhou, and Rui Liu. "Dramatically enhanced electrical breakdown strength in cellulose nanopaper." AIP Advances 6, no. 9 (2016): 095026. http://dx.doi.org/10.1063/1.4964151.

Full text

APA, Harvard, Vancouver, ISO, and other styles

49

Requena Sánchez, Bernardo, Paulino Padial Puche, and Juan José González-Badillo. "Percutaneous Electrical Stimulation in Strength Training: An Update." Journal of Strength and Conditioning Research 19, no. 2 (2005): 438. http://dx.doi.org/10.1519/13173.1.

Full text

APA, Harvard, Vancouver, ISO, and other styles

50

Han ¶, K., R. P. Walsh, A. Ishmaku, V. Toplosky, L. Brandao, and J. D. Embury. "High strength and high electrical conductivity bulk Cu." Philosophical Magazine 84, no. 34 (2004): 3705–16. http://dx.doi.org/10.1080/14786430412331293496.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!