Relevant bibliographies by topics / Electrolysis borating

Contents

  1. Journal articles

Academic literature on the topic 'Electrolysis borating'

Author: Grafiati
Published: 3 June 2025
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Electrolysis borating.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Electrolysis borating"

1

Fedorenkova, L. I., and G. P. Fedina. "Saturating ability of the borax melt." Journal of Physics and Electronics 27, no. 2 (2019): 55–60. http://dx.doi.org/10.15421/331924.

Full text
Abstract:
The work is devoted to the research of influence of the electrolysis on the saturating ability of the electrolyte, which is a borax melt. To establish regularity when the saturating medium activity changes, which influences the intensification of saturation process, the structure and properties of borax during electrolysis were investigated. The change in the saturating medium activity was estimated by a relative value equal to the ratio of the boride layer depth obtained by non-electrolysis borating to the layer depth obtained by electrolysis borating. When comparing the real and theoretical
APA, Harvard, Vancouver, ISO, and other styles
2

Builov, V. N., and I. V. Lyulyakov. "Investigation into the Process of Electrolysis Borating of Steel Parts." Surface Engineering and Applied Electrochemistry 54, no. 4 (2018): 338–44. http://dx.doi.org/10.3103/s1068375518040051.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Gorlanov, E. S., and A. A. Polyakov. "On the question of using solid electrodes in the electrolysis of cryolite-alumina melts. Part 3. Electric field distribution on the electrodes." Proceedings of Irkutsk State Technical University 25, no. 2 (2021): 235–51. http://dx.doi.org/10.21285/1814-3520-2021-2-235-251.

Full text
Abstract:
The aim of this work is to identify the theoretical limitations of molten salts electrolysis using solid electrodes to overcome these limitations in practice. We applied the theory of electric field distribution on the electrodes in aqueous solutions to predict the distribution of current density and potential on the polycrystalline surface of electrodes in molten salts. By combining the theoretical background of the current density distribution with the basic laws of potential formation on the surface of the electrodes, we determined and validated the sequence of numerical studies of electrol
APA, Harvard, Vancouver, ISO, and other styles
4

Buylov, V. N., F. Ya Rudik, I. V. Lyulakov, S. A. Makarov, and A. V. Pavlov. "Calculated substantiation of isolation of boron and sodium cations from molten working and heating medium during hardening of restored parts." Journal of Physics: Conference Series 2176, no. 1 (2022): 012046. http://dx.doi.org/10.1088/1742-6596/2176/1/012046.

Full text
Abstract:
Abstract Scientific and technological research in the development of the technical process for the restoration and strengthening of worn parts using calculated justification allowed us to make an optimal technical decision on the development of a method for surfacing and electrolysis borating of parts to increase their service life. The working medium for strengthening the restored tillage organs of agricultural aggregates is substantiated theoretically using the developed mathematical model describing the working medium as a thermodynamic system consisting of boron cations, sodium and oxygen
APA, Harvard, Vancouver, ISO, and other styles
5

Gorlanov, Е. S. "On the question of using solid electrodes in the electrolysis of cryolite-alumina melts. Part 2. The mechanism of passivation and conditions of stable electrolysis." Proceedings of Irkutsk State Technical University 25, no. 1 (2021): 108–21. http://dx.doi.org/10.21285/1814-3520-2021-1-108-121.

Full text
Abstract:
The aim was to investigate the mechanism of passivation of polycrystalline cathodes and to justify experimentally the possibility of stable electrolysis when using solid electrodes. Under laboratory conditions, the mechanism of electrode passivation and the conditions for stable electrolysis were experimentally studied. To this end, the methods of X-ray phase analysis and electron-microscopic examination of the spent electrodes were employed. A study of the electrolysis of cryolite-alumina melts showed that, in the presence of surface micro- and microdefects on a solid cathode, a precipitate c
APA, Harvard, Vancouver, ISO, and other styles
6

Буйлов, В.Н., та И.В. Люляков. "Исследование процесса электролизного борирования стальных деталей". Elektronnaya Obrabotka Materialov 53, № 3 (2017): 25–32. https://doi.org/10.5281/zenodo.1053511.

Full text
Abstract:
The paper offers the results of experimental studies of the effect of electrolysis borating and of the steel grade of hardenable details on the distribution of boron and carbon at the thickness of the diffusion layer. The structure, the phase composition, the concentration of boron and carbon at the thickness of the hardened layer, and boride coating properties are investigated. The optimal values of the initial carbon concentration are found. The optimal technological modes of the hardening process are determined that allow getting the surface with a minimum speed of wear in abrasive environm
APA, Harvard, Vancouver, ISO, and other styles
7

Donskikh, D. F., and Yu E. Ezhov. "Wear resistance of steels and suction-tube dredger members hardened by surface electrolysis borating during abrasive wear." Journal of Machinery Manufacture and Reliability 40, no. 4 (2011): 355–58. http://dx.doi.org/10.3103/s1052618811030058.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Gromov, V. E., S. V. Konovalov, O. A. Peregudov, M. O. Efimov, and Yu A. Shlyarova. "Coatings from high-entropy alloys: State and prospects." Izvestiya. Ferrous Metallurgy 65, no. 10 (2022): 683–92. http://dx.doi.org/10.17073/0368-0797-2022-10-683-692.

Full text
Abstract:
The authors made a brief review of recent publications by foreign and domestic researchers on the structure, phase composition, and properties of films and coatings of five-component high-entropy alloys (HEA) on various substrates and modification of the HEA surface by various types of processing. The main methods of applying films and coatings are considered: magnetron sputtering, thermal sputtering, laser sputtering, and electrodeposition. Particular attention is paid to the deposition of coatings on stainless steels and titanium alloys. The positive change in the tribological, strength prop
APA, Harvard, Vancouver, ISO, and other styles
9

Soldatenko, L., A. Shipko, and I. Shipko. "DIRECTION OF IMPROVEMENT OF THE WORKING BODIES OF HAMMER." Grain Products and Mixed Fodder’s 20, no. 2 (2020): 41–47. http://dx.doi.org/10.15673/gpmf.v20i2.1766.

Full text
Abstract:
Among the many types of grinding machines used in enterprises of grain processing, food and other industries, an important place belongs to hammer crushers. This is explained by the possibility of their use for grinding materials of various origins (plant, animal, mineral, as well as various wastes of food production), various particle size distribution (lumpy, briquetted, granular, fibrous), having different strength properties (hard, medium hard, soft, brittle, viscous), capable of being crushed once or requiring double sequential crushing. In addition, hammer crushers are characterized by r
APA, Harvard, Vancouver, ISO, and other styles
10

Чеха, О. В. "INVESTIGATION OF POSSIBLE REACTIONS BETWEEN COMPONENTS OF BORATING COMPOSITION AND IRON OF FOOD GRADE STEEL." Естественные и технические науки, no. 6(169) (July 21, 2022). http://dx.doi.org/10.25633/etn.2022.06.26.

Full text
Abstract:
Материал статьи знакомит с моделью, в которой раскрыта динамика боридных слоев Fe2B и FeB в состоянии роста. Исследовательская деятельность позволила охарактеризовать фазы FeB и Fe2 с возникающим напряженным состоянием, сопровождающим электролизное борирование железа пищевой стали. По эффективности контроля опережает другие методы исследования напряженного состояния состава железа из пищевой стали после химико-термической обработки. The material of the article introduces a model in which the dynamics of Fe2B and FeB boride layers in a state of growth is revealed. The research activity made it
APA, Harvard, Vancouver, ISO, and other styles
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography