To see the other types of publications on this topic, follow the link: Electronic amplifiers.
Dissertations / Theses on the topic 'Electronic amplifiers'
Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles
Consult the top 50 dissertations / theses for your research on the topic 'Electronic amplifiers.'
Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.
You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.
Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.
1
Zhu, Zhineng. "Low Noise Offset Operational Amplifier for Nanopore-based Gene Sequencer." Fogler Library, University of Maine, 2007. http://www.library.umaine.edu/theses/pdf/ZhuZ2007.pdf.
Full text
2
Banerjee, Gaurab. "Desensitized CMOS low noise amplifiers /." Thesis, Connect to this title online; UW restricted, 2006. http://hdl.handle.net/1773/6014.
Full text
3
Strait, Thomas J. "Comparison of noise performance of capacitive sensing amplifiers." Diss., Online access via UMI:, 2006.
Find full text
4
Neethling, M. (Marthinus). "A broadband microwave limiting amplifier." Thesis, Stellenbosch : University of Stellenbosch, 2004. http://hdl.handle.net/10019.1/16406.
Full textAbstract:
Thesis (MScIng)--University of Stellenbosch, 2004.ENGLISH ABSTRACT: Limiting amplifiers are employed in electronic warfare (EW) systems requiring a high measure of amplitude control. These EW systems employ sensitive signal processing components that are unable to accept the full dynamic range of input signals the system must face. The limiting amplifier, however, offers the unique capability of reducing the received signal spectrum to a suitable dynamic range. A typical application of the limiting amplifier is in the instantaneous frequency measurement (IFM) receiver where the limiting amplifier allows the receiver to accurately measure pulsed signals over a wide input dynamic range The aim of this study is the design and analysis of a broadband limiting amplifier. Focus is placed on the design of a socalled backbone limiting amplifier (BLA) which forms an integral part of a proposed modular design approach for realizing a design with improved input dynamic range. A designed BLA is discussed in this thesis while insight is given as to the intricacies associated with its mechanism of operation. Over its 45 dB (- 40 to + 5 dBm) input dynamic range, the designed 2-18 GHz limiting amplifier offers a typical saturated output power of 7.5 dBm while harmonic suppression of better than 8.6 dBc is achieved. The BLA design was based on an existing limiting amplifier design, the so-called baseline limiting amplifier, employing alternating amplifiers and attenuators. Evaluation of the baseline limiting amplifier design allowed for formulation of a design hypothesis for realizing the BLA design. Physical measurements on the BLA were then used to scrutinize and validate the formulated design hypothesis. The requirements for realizing the BLA design were the establishment of a thorough radio frequency (RF) amplifier design capability, an understanding of the nonlinear phenomena associated with the RF amplifier and the utilization and control thereof within the limiting amplifier. Different RF amplifier designs that were carried out are discussed in this thesis, while it is shown how they were used to further investigate important design considerations for application in the BLA design. The computer-aided design packages namely MultiMatch and Microwave Office (MWO) were successfully used in realizing the desired broadband RF amplifier designs and the eventual BLA design.
AFRIKAANSE OPSOMMING: Beperker versterkers word gebruik in elektroniese oorlogvoering (EO) stelsels waar ’n redelike mate van amplitude beheer noodsaaklik is. Sensitiewe seinverwerking komponente, wat nie die volle dinamiese bereik van intreeseine kan hanteer nie, maak deel uit van hierdie EO stelsels. Die beperker versterker bied egter die unieke eienskap om die ontvangde seinspektra te reduseer tot ’n gepaste dinamiese bereik. ’n Tipiese toepassing vir die beperker versterker is as deel van die oombliksfrekwensie- meting ontvanger waar die beperker versterker die ontvanger toelaat om akkurate meting van gepulsde seine te doen oor ’n wye intree dinamiese bereik. Die doel van hierdie studie is die ontwerp en analise van ’n wye-band beperker versterker. Fokus word geplaas op die ontwerp van ’n sogenaamde kruks beperker versterker wat ’n integrale deel uitmaak van ’n voorgestelde modulêre ontwerpsbenadering, wat ten doel het om ’n verbeterde intree dinamiese bereik daar te stel. Oor die 45 dB (- 40 tot + 5 dBm) intree dinamiese bereik, bied die ontwerpte 2-18 GHz beperker versterker ’n tipiese versadigde uittreedrywing van 7.5 dBm terwyl harmonieke onderdrukking van beter as 8.6 dBc verkry is. Die ontwerp van hierdie komponent word in hierdie tesis bespreek terwyl belangrike aspekte oor die werking daarvan uitgelig word. Die ontwerp van die kruks beperker versterker is gebaseer op ’n bestaande beperker versterker ontwerp, of sogenaamde basis ontwerp, wat gebruik maak van afwisselende versterkers en attenuators. Evaluering van die basis ontwerp het toegelaat vir die formulering van 'n ontwerpshipotese om die kruks beperker versterker te realiseer. Fisiese metings op die kruks beperker versterker is gebruik om die ontwerpshipotese krities te evalueer. Om die kruks beperker versterker te realiseer moes die nodige RF versterker ontwerpsvaardigheid daargestel word, ’n begrip vir die nie-liniêere verskynsels in die RF versterker en die gebruik en beheer daarvan in die beperker versterker moes daargestel word. Verskeie RF versterkers wat ontwerp is word in hierdie tesis bespreek, terwyl getoon word hoe hierdie ontwerpe gebruik is om belangrike ontwerpsaspekte te ondersoek wat uiteindelik toegepas is in die kruks beperker versterker ontwerp. Die ontwerpspakkette naamlik MultiMatch en Microwave Office is suksesvol gebruik vir die realisering van die nodige wye-band RF versterkers en die uiteindelike kruks beperker versterker ontwerp.
5
Tumati, Raghu. "Solid-State Nanopore Characterization and Low noise Transimpedance Amplifier for Nanopore-Based Gene Sequencer." Fogler Library, University of Maine, 2008. http://www.library.umaine.edu/theses/pdf/TumatiR2008.pdf.
Full text
6
Barbara, Nabil Victor 1964. "Simulation of radiation-induced parametric degradation in electronic amplifiers." Thesis, The University of Arizona, 1989. http://hdl.handle.net/10150/277143.
Full textAbstract:
Many high performance amplifiers use power MOSFETs in their output stages, especially in operational amplifier applications whenever high current or power is needed. MOSFETs have advantages over bipolar transistors in amplifier output stage because MOSFETs are majority carrier devices. The result is wide frequency response, fast switching and better linearity than power bipolar transistors. But unlike bipolar circuits, which are relatively tolerant of ionizing radiation, MOSFETs may suffer severe parametric degradation at low total-dose levels. The effects of ionizing radiation on MOSFETs are discussed, and the performance of an amplifier circuit that uses a complementary MOSFET source follower in its output stage is simulated to examine the effect of MOSFET radiation damage on amplifier performance. An increase in power dissipation was the most significant degradation caused by ionizing radiation.
7
Brand, Konrad Frederik. "The experimental design and characterisation of Doherty power amplifiers." Thesis, Link to the online version, 2006. http://hdl.handle.net/10019.1/2594.
Full text
8
Hall, Andrew D. "Broadband, low-noise and power microwave amplifiers." Master's thesis, University of Cape Town, 1986. http://hdl.handle.net/11427/17613.
Full textAbstract:
The design of Broadband, Low-Noise and Power Microwave Amplifiers using microstrip softboard technology is investigated. The software program TOUCHSTONE (TM) by EEsof is used extensively as a basic design tool. The characterisation of the GaAs Field Effect Transistors, used for the amplifiers, is carried out. These characterisations are then used by the program in its circuit analysis. A determination of the validity of using the manufacturer's data, for the designs, is determined by comparing it to the measured data. Source-Pull and Load-Pull measurements were performed for the Power GaAs FET characterisation. The noise-parameter device characterisation is carried out in a similar way to that for Load-Pull data. Each amplifier required final tuning adjustments in order to peak the performances. The Broadband Maximum Gain Amplifier had a 10 ± 1.5dB gain over a bandwidth from 2- to 6-GHz. The Low-Noise amplifier achieved 5dB Noise-Figure and 5.4 ± 1. 4dB gain over the 2- to 6-GHz band. The Power amplifier Output Power was 390mW over the 3.7- to 4.2-GHz band. Techniques of broadband matching are investigated, with Double-Stub matching producing the widest bandwidth. A literature survey is presented on aspects of broadband microwave amplifiers, as well as a survey on Computer-aided-design at microwave frequencies and techniques of Large-Signal Transistor characterisation.
9
Badenhorst, Le Roux. "Cryogenic amplifiers for interfacing superconductive systems to room temperature electronics." Thesis, Stellenbosch : Stellenbosch University, 2008. http://hdl.handle.net/10019.1/1586.
Full textAbstract:
Thesis (MScEng (Electrical and Electronic Engineering))--Stellenbosch University, 2008.This thesis is aimed at testing commercially available CMOS amplifier ICs at 4 K. Super Conducting Electronics (SCE) will also be used to amplify RSFQ signals for easier detection by CMOS technology and better signal-to-noise ratios. The SCE comprises of a Suzuki stack amplifier, a 250 μA JTL and a DC-to-SFQ converter. The Suzuki stack amplifier is simulated in WRSPICE. It is able to amplify an SFQ signal synchronised with an external clock signal. The amplified signal can then be detected by a normal commercially available CMOS amplifier IC. To keep the noise in the signal to a minimum, the commercial amplifier must be be situated as close as possible to the SCE. The amplifier must therefore be able to operate at 4 K. Ten different amplifier ICs were tested and three was found that worked down to 4 K.
10
McIver, Stuart Roderick Arthur. "High power LDMOS L-band radar amplifiers." Thesis, Stellenbosch : University of Stellenbosch, 2010. http://hdl.handle.net/10019.1/4092.
Full textAbstract:
Thesis (MScEng (Electrical and Electronic Engineering))--University of Stellenbosch, 2010.ENGLISH ABSTRACT: The thesis details the design, construction and experimental evaluation of 30W, 35W and 250W L-Band LDMOS Radar amplifiers. Each amplifier module contains an integrated high speed power supply in order to optimize RF pulse repeatability and to improve radar MTI factor (Moving Target Indication.) As part of the work, a pulsed RF measurement system for measuring the dynamic I-V curves of a power FET was developed. Work was also done on low impedance S-parameter measurement test fixtures for the characterisation of power FETs. These measurement systems generated design information which was used in the development of the L-Band power amplifiers
AFRIKAANSE OPSOMMING: Hierdie tesis beskryf die ontwerp, bou en experimentele evaluering van „n 30W, 35W en 250W L-band LDMOS radarversterker. Elke versterker bevat ook „n geintegreerde hoë-spoed kragbron om optimum RF pulsherhaalbaarheid te verseker en die radar se „MTI (Moving Target Indication)‟ te verbeter. „n RF-pulsmetingstelsel is ook ontwikkel om die dinamiese I-V kurwes van „n hoë-krag FET te meet. Verder is daar ook gewerk aan „n toetsopstelling vir lae-impedansie S-parameters om hoë-krag FETs te karakteriseer. Hierdie toetsopstelling is gebruik om ontwerpsdata te genereer wat gebruik is in die ontwerp van die L-band kragversterkers.
11
Fourie, Paul. "Pulse power device characterization for amplifier design." Thesis, Stellenbosch : University of Stellenbosch, 2004. http://hdl.handle.net/10019.1/16323.
Full textAbstract:
Thesis (MSCIng)--University of Stellenbosch, 2004.ENGLISH ABSTRACT: Bi-polar Si transistors optimized for pulse conditions is still the most popular choice as amplification element in the final stages of solid-state radar amplifiers in L and S band. With the radar market being small, the design data for these devices is normally fairly limited and it is up to the designers to thoroughly characterize them for their designs. This is normally done through loadpull experiments. Professional automated load-pull equipment is very expensive especially at the higher power levels. In spite of being automated and under computer control, load-pull exercises still is very time consuming and as such expensive. For small companies that only occasionally need to design such amplifiers it is not economically viable to acquire such equipment and different strategies have to be found to stay competitive. This report investigates such a strategy and its implementation. A procedure to quickly and accurately characterize such devices was developed and two amplifiers were designed and build with this procedure and compared to their traditional counterparts for verification. The results were very promising and with a bit more work, the technique can likely be used to characterize these devices for design work outside of the parameters designated by the manufacturers.
AFRIKAANSE OPSOMMING: Bipolere Silikon transistors wat vir werking onder gepulsde toestande geoptimiseer is, is nog steeds die mees gewilde keuse as versterkingselement in die finale stadiums van vastetoestand radar versterkers in die L en S bande. Met die radar mark wat geredelik klein is, is die ontwerp inligting vir hierdie elemente gewoonlik redelik karig en is dit die taak van die ontwerpers om die elemente te karakteriseer vir hulle ontwerp doeleindes. Dit word normaalweg gedoen deur lastrek eksperimente. Geoutomatiseerde lastrek toerusting is baie duur, veral as dit onder hoë drywingstoestande moet werk. Al is die toerusting geoutomatiseer en onder rekenaar beheer, is lastrek oefeninge nog steeds baie tydrowend en daarom dan ook baie duur. Vir klein maatskappye wat net nou en dan nodig het om sulke versterkers te ontwerp is dit gewoon nie ekonomies regverdigbaar om sulke toerusting aan te skaf nie, en ander strategië moet gevind word om ekonomies kompeterend te bly. Hierdie verslag ondersoek so 'n strategie en die implimentering daarvan. n Prosedure om gepulsde bipolere transistore vinnig en akkuraat te karakteriseer is ontwikkel en twee versterkers is met die prosedure ontwerp en gebou. Die versterkers is geverifieer deur hulle met hulle tradisionele eweknië te vergelyk. Die resultate lyk baie belowend en met n bietjie meer werk kan die metode waarskynlik ook gebruik word om die transistors buite die toepassings gebied, soos deur die vervaardigers aangedui, te gebruik.
12
Jansen, Roelof. "Evaluation of Doherty Amplifier Implementations." Thesis, Stellenbosch : Stellenbosch University, 2008. http://hdl.handle.net/10019.1/20445.
Full textAbstract:
Thesis (MScIng)--Stellenbosch University, 2008.ENGLISH ABSTRACT: Modern communication systems demand efficient, linear power amplifiers. The amplifiers are often operated in the backed-off power levels at which linear amplifiers such as class B amplifier are particularly inefficient. The Doherty amplifier provides an improvement as it increases efficiency at backed of power levels. Doherty amplifiers consists of two amplifiers, a carrier amplifier and a peaking amplifier, of which the output is combined in a novel way. Implementation of the Doherty amplifier with transistors is not ideal. One of the main problems is the insufficient current production of the peaking amplifier at peak envelope power (PEP) if it is implemented as a class C amplifier. A suggested solution to this problem is a bias adaption system that controls the peaking amplifier gate voltage dynamically depending on the input power levels. The design and evaluation of such a adaptive Doherty amplifier is the main goal of this thesis. A classical Doherty amplifier with and an uneven Doherty amplifier with unequal power division between the carrier and peaking amplifiers are also evaluated and compared with the adaptive Doherty amplifier. The amplifiers are designed using a 10 W LDMOS FET device, the MRF282. The adaptive Doherty amplifier and the uneven Doherty amplifier show significant improvements in efficiency and output power over the even Doherty amplifier. At PEP the adaptive Doherty delivers 42.4 dBm at 39.75 % power added efficiency (PAE), the uneven Doherty amplifier 41.9 dBm at 40.75 % PAE and the even Doherty amplifier 40.8 dBm at 38.6 % PAE. At 3dB backed-off input power the adaptive Doherty amplifier has an efficiency of 34.3%, compared to 34.9 5% for the uneven Doherty amplifier and 29.75 % for the even Doherty amplifier.
AFRIKAANSE OPSOMMING: Moderne kommunikasie stelsels vereis effektiewe, linieêre drywing versterkers. Die versterkers word dikwels in laer drywings vlakke bedryf waar linieêre versterkers soos ’n klas B versterker besondere lae effektiwiteit het. Die Doherty versterker bied ’n uitweg omdat dit verbeterde effektiwiteit by lae drywings vlakke bied. ’n Doherty versterker bestaan uit twee versterkers, die hoof versterker en die aanvullende versterker, waarvan die uittrees met ’n spesiale kombinasie netwerk bymekaar gevoeg word. Die implementasie van Doherty versterkers met transistors is nie ideaal nie. Een van die hoof probleme is die onvoldoende stroom wat deur die aanvullings versterker gebied word by piek omhulsel drywing (POD). ’n Oplossing vir die probleem is om ’n aanpassings sisteem te gebruik wat die aanvullende versterker se hekspanning dinamies beheer afhangende van die intree drywings vlakke. Die ontwerp en evaluasie van so ’n aanpassings Doherty versterker is die hoof doel van hierdie tesis. ’n Klassieke Doherty versterke met gelyke drywings verdeling en ’n ongelyke Doherty versterker wat gebruik maak van ongelyke drywings verdeling tussen die hoof-en aanvullende versterkers is ook gevalueer en vergelyk met die aanpassings Doherty versterker. Die versterkers was ontwerp met ’n 10 W LDMOS FET, die MRF282. Die aanpassings Doherty versterker en die ongelyke Doherty versterker het aanmerklike verbeteringe in effektiwiteit en uittree drywing gebring in vergelyking met die ewe Doherty versterker. By POD het die aanpassings versterker 42.4 dBm teen 39.75 % drywing toegevoegde effektiwiteit (DTE) gelewer, die ongelyke Doherty versterker 41.9 dBm teen 40.75 % DTE, en die ewe Doherty versterker 40.8 dBm teen 38.6 DTE. By ’n intree drywingsvlak 3 dB laer as POD het die aanpassings Doherty versterker ’n effektiwiteit van 34.3 % getoon, in vergelyking met die onewe Doherty versterker se 34.9 % en die ewe Doherty versterker se 29.75 % DTE.
13
Jacobs, Deon. "Digital pulse width modulation for Class-D audio amplifiers." Thesis, Stellenbosch : University of Stellenbosch, 2006. http://hdl.handle.net/10019.1/1574.
Full textAbstract:
Thesis (MScEng (Electrical and Electronic Engineering))--University of Stellenbosch, 2006.Digital audio data storage mediums have long been used within the consumer market. Today, because of the advancement of processor clock speeds and increased MOSFET switching capabilities, digital audio data formats can be directly amplified using power electronic inverters. These amplifiers known as Class-D have an advantage over there analogue counterparts because of their high efficiency. This thesis deals with the signal processing algorithms necessary to convert the digital audio data obtained from the source to a digital pulse width modulated signal which controls a full bridge inverter for audio amplification. These algorithms address difficulties experienced in the past which prevented high fidelity digital pulse width modulators to be implemented. The signal processing algorithms are divided into modular blocks, each of which are defined in theory, designed and simulated in Matlab® and then implemented within VHDL firmware. These firmware blocks are then used to realize a Class-D audio amplifier.
14
Burstinghaus, Edward J. "Resampled pulse width modulation methods for high-bandwidth power electronic amplifiers." Thesis, Queensland University of Technology, 2020. https://eprints.qut.edu.au/135715/1/Edward_Burstinghaus_Thesis.pdf.
Full textAbstract:
This work investigates modifications to the existing digital sampling methods for pulse width modulation of power electronic amplifiers so that faster and more accurate control can be achieved. It proposes resampled PWM as a generalisation of the existing methods and presents simulations and experiments that demonstrate its superior performance. Power hardware in the loop experiments are also presented as a demonstration of an application which demands both high bandwidth and high amplifier power levels and which benefits from the improved controllable bandwidth of resampled PWM.
15
Barclay, Duncan McL. "A design study for gallium arsenide operational transconductance amplifiers." Thesis, University of York, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.338625.
Full text
16
Huang, Chih-Jung. "Opto-electronic class AB microwave power amplifier using photoconductive switch technology." Diss., Columbia, Mo. : University of Missouri-Columbia, 2006. http://hdl.handle.net/10355/4458.
Full textAbstract:
Thesis (Ph.D.)--University of Missouri-Columbia, 2006.The entire dissertation/thesis text is included in the research.pdf file; the official abstract appears in the short.pdf file (which also appears in the research.pdf); a non-technical general description, or public abstract, appears in the public.pdf file. Title from title screen of research.pdf file viewed on (April 26, 2007) Vita. Includes bibliographical references.
17
Du, Plessis Francois Daniel. "Development of nonlinear CAD Models for the design of linear LDMOS power amplifiers." Thesis, Stellenbosch : University of Stellenbosch, 2006. http://hdl.handle.net/10019.1/1691.
Full textAbstract:
Thesis (MScEng (Electrical and Electronic Engineering))--University of Stellenbosch, 2006.Nonlinear transistor modeling is becoming increasingly popular due to the demand for high linearity and high efficiency microwave amplifiers. The available models often fail to accurately predict the higher order harmonics and intermodulation distortion, which are essential when designing high-linearity amplifier circuits. This thesis describes the design of hardware and software used for the development of nonlinear CAD models. A multiline TRL calibration kit is designed and manufactured so that the characterisation of a LDMOSFET, with a RF output power capability of 10W, can be performed using an adaptive-bias S-parameter measurement algorithm. Verification standards are also manufactured and used to determine the measurement accuracy after calibration. A series of GUIs are developed to ease the model extraction process. The extraction of the small-signal model parameters is performed between 0.4 and 3 GHz, and the extraction of the parameter values for the Fager large-signal model is then performed. An improved model is defined that implements two nonlinear charge sources in stead of the three nonlinear capacitors used in the Fager model. The nonlinear charge equations are formulated using the voltage-derivatives of the calculated nonlinear charge at each port of the device. By accurately modeling the voltagederivatives of the charge, where the voltages are functions of time, the prediction of the current produced by each of the charge sources is improved. The nonlinear models are verified against the MET model, and all three models are compared to measured data. It is shown that the models are able to accurately predict the single-tone and two-tone output harmonics for class-AB operation, and in many cases the predictions outperform that of the MET model. The single-tone output power is also verified for class-C operation. Although this prediction is not extremely accurate, it is found that the correct trend for the output harmonic power can be predicted.
18
Prinsloo, David Schalk Van Der Merwe. "Characterisation of L-band differential low noise amplifiers." Thesis, Stellenbosch : Stellenbosch University, 2011. http://hdl.handle.net/10019.1/18063.
Full textAbstract:
Thesis (MScEng)--Stellenbosch University, 2011.ENGLISH ABSTRACT: This thesis addresses the complications that are encountered when characterising the performance of differential microwave LNAs. The predominant sources of noise in electronic circuits are introduced and equivalent two-port noise models for active devices are derived. Correlation between noise generators are defined by means of the noise correlation matrix and existing network theory is adapted to include noise analysis of twoport and multi-port networks. Mixed-mode scattering parameters are introduced in order to define the signal performance of differential and common-mode propagation in multi-port networks and, by applying the same theory, the mixed-mode correlation matrix for a three-port dLNA is derived. Furthermore, an expression is derived for de-embedding the differential noise figure of a three-port dLNA using two single ended measurements. Two dLNA designs, both incorporating wideband 180°-Hybrid ring couplers, are discussed and the differential signal and noise performance of the dLNAs are compared to that of their constituent single ended LNAs.
AFRIKAANSE OPSOMMING: Hierdie tesis behandel die komplikasies wat ontwerpers in die gesig staar tydens die karakterisering van mikrogolf differensiële laeruis versterkers. Die hoof ruisbronne in stroombane word bespreek en ekwivalente tweepoortnetwerkmodelle vir aktiewe toestelle word afgelei. Korrelasie tussen ruisbronne word gedefnieer deur middel van ruiskorrelasiematrikse en bestaande tweepoort- en multipoort-netwerkteorie word aangepas om ruismodelle in te sluit. Weens die feit dat differensiële- en gemene-wyse voortplanting van seine voorkom in multipoortnetwerke word gemengde-modus S-parameters behandel. Dieselfde teorie maak dit vervolgens moontlik om die gemengde-modus ruiskorrelasiematriks van ’n drie-poort differensiële laeruis versterker af te lei. Verder word daar ’n wyse voorgestel waarmee die differensiëleruissyfer van ’n drie-poort differensiële laeruis versterker vanuit twee enkel ruissyfermetings bereken kan word. Twee differensiële laeruis versterker ontwerpe, waarvan beide wyeband 180 -differensiaalkoppelaars implementeer, word bespreek en die differensiëlesein- asook die differensiëleruis-werking word vergelyk met die werking van die omsluite ongebalanseerde laeruis versterkers.
19
LI, XIAOXU. "WAVELENGTH-DIVISION-MULTIPLEXED TRANSMISSION USING SEMICONDUCTOR OPTICAL AMPLIFIERS AND ELECTRONIC IMPAIRMENT COMPENSATION." Doctoral diss., University of Central Florida, 2009. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/4025.
Full textAbstract:
Over the last decade, rapid growth of broadband services necessitated research aimed at increasing transmission capacity in fiber-optic communication systems. Wavelength division multiplexing (WDM) technology has been widely used in fiber-optic systems to fully utilize fiber transmission bandwidth. Among optical amplifiers for WDM transmission, semiconductor optical amplifier (SOA) is a promising candidate, thanks to its broad bandwidth, compact size, and low cost. In transmission systems using SOAs, due to their large noise figures, high signal launching powers are required to ensure reasonable optical signal-to-noise ratio of the received signals. Hence the SOAs are operated in the saturation region and the signals will suffer from SOA impairments including self-gain modulation, self-phase modulation, and inter channel crosstalk effects such as cross-gain modulation, cross-phase modulation, and four-wave mixing in WDM. One possibility to circumvent these nonlinear impairments is to use constant-intensity modulation format in the 1310 nm window where dispersion is also negligible. In this dissertation, differential phase-shift keying (DPSK) WDM transmission in the 1310 nm window using SOAs was first considered to increase the capacity of existing telecommunication network. A WDM transmission of 4 x 10 Gbit/s DPSK signals over 540 km standard single mode fiber (SSMF) using cascaded SOAs was demonstrated in a recirculating loop. In order to increase the transmission reach of such WDM systems, those SOA impairments must be compensated. To do so, an accurate model for quantum-dot (QD) SOA must be established. In this dissertation, the QD-SOA was modeled with the assumption of overall charge neutrality. Static gain was calculated. Optical modulation response and nonlinear phase noise were studied semi-analytically based on small-signal analysis.
The quantitative studies show that an ultrafast gain recovery time of ~0.1 ps can be achieved when QD-SOAs are under high current injection, which leads to high saturation output power. However more nonlinear phase noise is induced when the QD-SOAs are used in the transmission systems operating at 10 Gbit/s or 40 Gbit/s. Electronic post-compensation for SOA impairments using coherent detection and digital signal processing (DSP) was investigated next in this dissertation. An on-off keying transmission over 100 km SSMF using three SOAs at 1.3 [micrometer] were demonstrated experimentally with direct detection and SOA impairment compensation. The data pattern effect of the signal was compensated effectively. Both optimum launching power and Q-factor were improved by 8 dB. For advanced modulation formats involving phase modulation or in transmission windows with large dispersion, coherent detection must be used and fiber impairments in WDM systems need to be compensated as well. The proposed fiber impairment compensation is based on digital backward propagation. The corresponding DSP implementation was described and the required calculations as well as system latency were derived. Finally joint SOA and fiber impairment compensations were experimentally demonstrated for an amplitude-phase-shift keying transmission.Ph.D.
Optics and Photonics
Optics and Photonics
Optics PhD
20
Al-Hashimi, B. M. A. "On the analysis and synthesis of active filters using transconductance amplifiers." Thesis, University of York, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.234974.
Full text
21
Wong, J. N. H. "Novel techniques for improving the performance of MESFET power amplifiers." Thesis, University of Surrey, 2003. http://epubs.surrey.ac.uk/843448/.
Full textAbstract:
This thesis describes the research activities that have been investigated for improving the 3rd order intermodulation distortion products (IM3) and power added efficiency (PAE) and bandwidth performance of microwave GaAs MESFET power amplifiers. Two novel circuit techniques, one for improving the 3dB bandwidth performance and the other for improving the IM3 and PAE performance, were proposed and verified through simulation and practical measurements. The technique of including lumped elements matching networks within the package encapsulation (Close-to-Chip lumped element matching) of a 2GHz MESFET device is described for the first time. Simulation results showed that the amplifier using this technique had a 3dB bandwidth 3 times wider than the amplifier with Off-Chip distributed element matching. The linearity and efficiency performance of a 2GHz MESFET was improved significantly by presenting a difference frequency shunt short-circuit termination across the drain terminal. A 16dB reduction in IM3 and an improvement of 4% in PAE performance was measured on the bench. Success with this technique was further demonstrated with digitally modulated signals.
22
Cove, Stephen E. "A 10 gigabit per second limiting amplifier with 40dB gain and 7 GHz bandwidth for SONET OC-192 applications." [Gainesville, Fla.] : University of Florida, 2005. http://purl.fcla.edu/fcla/etd/UFE0009921.
Full text
23
Harris, Mitchell T. "Analysis of semiconductor optical amplifiers in VCSEL based wavelength division multiplexing communication /." abstract and full text PDF (free order & download UNR users only), 2007. http://0-gateway.proquest.com.innopac.library.unr.edu/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:1446799.
Full textAbstract:
Thesis (M.S.)--University of Nevada, Reno, 2007."May, 2007." Includes bibliographical references (leaves 82-83). Online version available on the World Wide Web. Library also has microfilm. Ann Arbor, Mich. : ProQuest Information and Learning Company, [2007]. 1 microfilm reel ; 35 mm.
24
Varelas, Theodoros Carleton University Dissertation Engineering Electrical. "A monolithic BiCMOS power amplifier for low power digital radio transmitter." Ottawa, 1992.
Find full text
25
Tomlin, Toby-Daniel. "Analysis and modelling of jitter and phase noise in electronic systems : phase noise in RF amplifiers and jitter in timing recovery circuits." University of Western Australia. School of Electrical, Electronic and Computer Engineering, 2004. http://theses.library.uwa.edu.au/adt-WU2004.0021.
Full textAbstract:
Timing jitter and phase noise are important design considerations in most electronic systems, particularly communication systems. The desire for faster transmission speeds and higher levels of integration, combined with lower signal levels and denser circuit boards has placed greater emphasis on managing problems related to phase noise, timing jitter, and timing distribution. This thesis reports original work on phase noise modelling in electronic systems. A new model is proposed which predicts the up-conversion of baseband noise to the carrier frequency in RF amplifiers. The new model is validated by comparing the predicted phase noise performance to experimental measurements as it applies to a common emitter (CE), bipolar junction transistor (BJT) amplifier. The results show that the proposed model correctly predicts the measured phase noise, including the shaping of the noise about the carrier frequency, and the dependence of phase noise on the amplifier parameters. In addition, new work relating to timing transfer in digital communication systems is presented. A new clock recovery algorithm is proposed for decoding timing information encoded using the synchronous residual time-stamp (SRTS) method. Again, theoretical analysis is verified by comparison with an experimental implementation. The results show that the new algorithm correctly recovers the source clock at the destination, and satisfies the jitter specification set out by the ITU-T for G.702 signals.
26
Lu, Qing. "Applications of the genetic algorithm optimisation approach in the design of high efficiency microwave class E power amplifiers." Thesis, Northumbria University, 2012. http://nrl.northumbria.ac.uk/13340/.
Full textAbstract:
In this thesis Genetic Algorithm Optimisation Methods (GA) is studied and for the first time used to design high efficiency microwave class E power amplifiers (PAs) and associated load patch antennas. The difficulties of designing high efficiency PAs is that power transistors are highly non linear and classical design techniques only work for resistive loads. There are currently no high efficient and accurate procedures for design high efficiency PAs. To achieve simplified and accurate design procedure, GA and new design quadratic equations are introduced and applied. The performance analysis is based on linear switch models and non linear circuitry push-pull methods. The results of the analytical calculations and experimental verification showed that the power added efficiency (PAE) of the PAs mainly depend on the losses of the active device itself and are nearly independent on the losses of its harmonic networks. Hence, it has been proven that the cheap material PCB FR4 can be used to design high efficiency class E PAs and it also shown that low Q factor networks have only a minor effect on efficiency, allowing a wide bandwidth to be obtained. In additional, a new procedure for designing class E PAs is introduced and applied. The active device (ATF 34143) is used. Good agreement was obtained between predicted analyses and the simulation results (from Microwave Office (AWR) and Agilent ADS software). For the practical realization, class E PAs were fabricated and tested using PCB FR4. The practical results validate computer simulations and the PAE of the class E PAs are more than 71% and Gain is over 3.8 dB when input power (Pin) is equal to 14 dBm at 2 GHz.
27
Nel, Christoffel Antonie. "The creation of nonlinear behavioral-level models for system level receiver simulation." Thesis, Stellenbosch : Stellenbosch University, 2004. http://hdl.handle.net/10019.1/50128.
Full textAbstract:
Thesis (MScEng)--Stellenbosch University, 2004.ENGLISH ABSTRACT: The aim of this thesis was to investigate the use of behavioral level models in receiver simulations using the capabilities of Agilent's Advanced Design System. Behavioral level modeling has become increasingly attractive because it offers faster and easier results for system level simulations. The work in this thesis focused strongly on nonlinear measurements to characterize the various nonlinear phenomena that are present in amplifiers and mixers. Measurement automation software was developed to automate the process. An error correction technique was also developed to increase the accuracy of spectrum analyzer measurements. The measured data was used to implement the behavioral level amplifier and mixer models in ADS. The accuracy of the models was compared to measured data and the different available models were compared. Finally the models were combined to realize different receivers and were used to do typical receiver tests. These test include gain and gain compression, two-tone intermodulation and spurious responses. The results are compared to measured data to test the accuracy and usefulness of the models and simulation techniques.
AFRIKAANSE OPSOMMING: Die doel van hierdie tesis was om stelsel-vlak gedrags-modelle te ondersoek soos hulle in Agilent se Advanced Design System (ADS) aangebied word. Die modellering van die stelselvlak-gedrag van komponente en stelsels is aantreklik aangesien dit 'n hoë vlak beskrywing van komplekse kommunikasie stelsels moontlik maak. Akkurate stelsel-vlak simulasies sal lei tot vinnige ontwikkeling en evaluasie van nuwe sisteme. Die resultate wat verkry word is egter afhanklik van die beskikbaarheid van akkurate stelsel-vlak gedragsmodelle Die tesis het baie sterk op metings staat gemaak om die nie-liniêre gedrag van versterkers en mengers te karakteriseer. Meet sagteware is ontwikkel om die verskillende metings te automatiseer. Fout korreksie vir spetrum-analiseerder-metings is ook ontwikkel. Die gemete data is gebruik om die nie-liniêre gedrags-modelle in ADS te implementer. Die modelle is in simulasies gebruik en die akuraatheid van die simulasies is teen gemete data getoets. Die finale deel van die tesis gebruik die modelle om tipiese ontvanger karakteristieke te voorspel. Die volgende toetse is gedoen: aanwins en kompressie, twee-toon intermodulasie en hoer orde meng produkte. Die resultate van die toetse is met gemete data vergelyk om die akuraatehied en bruikbaarheid van die verskillende modelle te vergelyk.
28
Sanuy, Charles Andreu. "Wideband pulse amplifiers for the integrated cameras of the Cherenkov Telescope Array." Doctoral thesis, Universitat de Barcelona, 2016. http://hdl.handle.net/10803/396097.
Full textAbstract:
One type of photon detector is the photomultiplier tube (or PMT), most commonly used in Imaging Atmospheric Cherenkov Telescopes (IACTs). A PMT has a photoelectric cathode that absorbs light and emits an electron. A PMT also contains other electrodes in sequence called dynodes. Each dynode is kept at a higher voltage than the preceding one. Electrons are attracted to each successive dynode, and upon striking the dynode they knock off several additional electrons from the dynode. As the electron stream travels from dynode to dynode, more and more electrons are emitted as a cascade.
The pulses generated by the photo sensors (typically PMTs), need to be sampled very fast in order to determine with high precision its arrival time. A typical 2.5 ns width pulse from a PMT needs to be sampled at 800 MHz according to Nyquist theorem, being 1 Gs/s a typical sampling frequency. Considering that an IACT camera can have around 1000 pixels and 8 quantization levels, a continuous recording of the signals from all the pixels in a camera would mean a data rate of 1 TB/s, which is unmanageable. Instead of that, IACTs only records continuously when an interesting event is detected. In order to do that, they uses a data acquisition system based on analogue memories with a complex trigger system. This analogue memories sample the input signals at high sample rate, but with small buffers mounted on a dedicated ring configuration. The NECTAr's (New Electronics for the Cherenkov Telescope Array) front end (FE) option for the camera of the CTA (which is this thesis focused) is a 16 bits and 1— 3 GS/s sampling chip based on analogue memories. The trigger system, analyzes each pulse, and decides if the signal corresponds to a valid Cherenkov event to be stored or not.
According to the CTA consortium requirements, the camera specification needs dedicated electronic circuits out of the specifications of the commercial components in the market. Due to cost effective and state of the art innovation, some full custom ASICs have been developed. The aim of this thesis is to develop a full amplification channel path to inject the fast pulses coming from the camera sensors to the analogue memories of the digitizer circuitry. Based on the hard constrains of the amplification channel path for the CTA project, new technologies are applied to cover on one hand, the required wideband at the low noise level and, on the other hand decrease the power consumption required as much as possible.
A first amplification stage is based on a wideband current mode preamplifier with 16 bits DR. We propose a novel current mode circuit to overcome the maximum signal limitation by creating multiple gain paths at the very front end of the input stage. The input current is split in the common base input stage into two output scaled currents. Finally, the current signal is converted to voltage by a closed loop transimpedance amplifier.
A fully closed loop solution based on voltage feedback amplifiers (OTA or OpAmp) is not feasible because a Gain-bandwidth (GBW) product of more than 8 GHz is required, and the maximum GBW product that can be achieved in a 0.35 [tm CMOS technology is well below 1 GHz. An alternative approach based on linearized high frequency (HF) transconductors is explored for a second amplification stage, which includes dedicated circuitry to adjust the DC offset in order to be properly DC coupled to the NECTArO ADC, and is followed by a high swing current to voltage conversion, and finally a low output impedance closed loop buffer is used to drive a capacitive load.Aquesta tesi està centrada en un nou disseny de circuits per a la senyal d'entrada d'una càmera per a un telescopi Cherenkov on l'amplificació es divideix en dos etapes de guany per tal de aconseguir els requeriments del projecte. La primera etapa presenta un innovador disseny d'un preamplificador de baix soroll i gran ample de banda (BW) mentre que la segona etapa d'amplificació presenta un nou desenvolupament d'un circuït de guany, sent impossible d'aconseguir mitjançant els esquemes clàssics en a la tecnologia requerida. Aquesta segona etapa també adapta el senyal per a les posteriors parts electròniques del sistema de lectura de les càmeres dels telescopis Cherenkov. La primera etapa pre-amplificadora aconsegueix els requeriments mitjançant un innovador disseny que compleix totes les restriccions amb un baix consum. La solució escollida està basada en un nou circuit en mode corrent, creant múltiples camins de guany en les primeres parts de l'etapa d'entrada de la electrònica de lectura, d'aquesta manera podem aconseguir simultàniament prestacions de gran rang dinàmic, baix soroll, baixa impedància d'entrada, baix voltatge i baix consum. La etapa pre-amplificadora també incorpora un amplificador de transimpedància de llaç tancat amb una innovadora etapa de sortida de tipus AB dissenyada amb tecnologia SiGe 0.35 grn, permetent al disseny atacar línies de transmissió (típicament de 50 C) de càrrega) i mantenint el gran BW amb un moderat consum de potència. Aquesta tesi presenta un mètode alternatiu per a implementar amplificadors de polsos completament diferencials, aconseguint el guany desitjat i preservant a la vegada el gran BW. La linealitat en polsos ràpids es troba al nivell de solucions basades en OTA retro-alimentats limitats per la tassa de canvi (SR) i altres qüestions transitòries. Un amplificador en tecnologia CMOS de 0.35 grn implementa i valida el producte de guany-amplada de banda de 8 GHz oferint al mateix temps un gran marge d'ajust. Aquest disseny també incorpora un amplificador de transimpedància de llaç tancat amb una innovadora etapa de sortida de tipus AB basada en el disseny de la primera etapa amplificadora, però dissenyada en tecnologia CMOS de 0.35 grn, la qual resulta molt mes difícil d'aconseguir.
29
Liu, Lei. "Investigation of aperture coupled microstrip antenna to obtain a high efficient active integrated antenna by using Class F and Inverse Class F power amplifiers." Thesis, Northumbria University, 2013. http://nrl.northumbria.ac.uk/21425/.
Full textAbstract:
In wireless communications and radar systems, there are requirements for high efficiency, small size, low cost, and wide bandwidth of transmitter front –end usage for commercial and also military applications. Active integrated antenna (AIA) could satisfy almost all the requirements. The overall objective of the proposed research is to model, optimise, and design a compact and high efficient AIA using an aperture coupled microstrip antenna (ACMA) by integrating with a power amplifier (PA). Research on ACMA has been focused on the transmissions line (TL) model (TLM) and full wave electromagnetic (EM) model analysis. The full wave investigation is rigorous and elegant but because the dimension of the physical model and the value of the circuit elements are interdependent, the design of the antenna is still difficult. TLM analysis has lower accuracy but easier to analysis and optimise than full wave EM model analysis. To increase the accuracy, the challenge is the coupling ratios between feed/slot, and slot/patch where no unique solution at the moment exists. In this thesis, a novel and simplified method has been produced to investigate these ratios using Scattering (S) parameters. A dual frequency ACMA has been designed to verify these results. Research on the class F and inverse class F PAs is carried out by a novel and simplified load/pull method. A new design method of harmonic load matching network has been presented using lump elements and TLs. Both linear and nonlinear modelling has been investigated. High power added efficiency (PAE) and high gain which are up to 60% and 12dB have been obtained. Finally AIAs have been produced based on previous investigation on class F, inverse class F PAs and a broadband circular polarized ACMA design with 350 MHz bandwidth and 8.5 dB gain at 2 GHz.
30
Gebara, Edward. "Temperature dependent RF and optical device characterization and its application to circuit design." Diss., Georgia Institute of Technology, 2003. http://hdl.handle.net/1853/15760.
Full text
31
DYRJAWOJ, NICOLAU. "Desenvolvimento de um amplificador isolador para analise de sinais dinamicos." reponame:Repositório Institucional do IPEN, 2003. http://repositorio.ipen.br:8080/xmlui/handle/123456789/11104.
Full textAbstract:
Made available in DSpace on 2014-10-09T12:48:25Z (GMT). No. of bitstreams: 0Made available in DSpace on 2014-10-09T13:57:36Z (GMT). No. of bitstreams: 1 08984.pdf: 7815530 bytes, checksum: 2846bcddfb4f882d621deacbf8447f3e (MD5)
Dissertacao (Mestrado)
IPEN/D
Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP
32
De, Villiers Dirk I. L. "Analysis and design of conical transmission line power combiners." Thesis, Link to the online version, 2007. http://hdl.handle.net/10019/607.
Full text
33
Howard, Duane Clarence. "Reconfigurable amplifiers and circuit components for built-in-self testing and self-healing in SiGe BiCMOS technology." Diss., Georgia Institute of Technology, 2014. http://hdl.handle.net/1853/51823.
Full textAbstract:
The design of reconfigurable microwave and millimeter-wave circuit components and on-chip testing circuitry are demonstrated. These components are designed to enable the mitigation of process faults, aging, radiation effects, and other mechanisms that lead to performance degradation in circuits and systems. The presented work is primarily based on SiGe HBTs in BiCMOS technology and harnesses the inherent resilience of SiGe to mechanisms that degrade transistor performance. However, CMOS FETs are also used in limited applications, such as in the design of switches, op-amps, and DACs. Individual circuit blocks and circuit systems are characterized with the aim of evaluating their performance under nominal conditions as well as in the context of extreme environments and other deleterious phenomena.
34
Paro, Filho Pedro Emiliano. "A variable-gain transimpedance amplifier for MEMS-based oscillators = Um amplificador de transimpedância de ganho variável para aplicação em osciladores baseados em MEMS." [s.n.], 2012. http://repositorio.unicamp.br/jspui/handle/REPOSIP/259292.
Full textAbstract:
Orientador: José Alexandre DinizDissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Elétrica e de Computação
Made available in DSpace on 2018-08-20T16:11:38Z (GMT). No. of bitstreams: 1 ParoFilho_PedroEmiliano_M.pdf: 39204453 bytes, checksum: 8ea6c789b126029d1ff5b579bdd25102 (MD5) Previous issue date: 2012
Resumo: Um amplificador de transimpedância (TIA) de ganho variável é apresentado. Implementado em tecnologia 0,18 'mi'm, o projeto relatado possui a finalidade de prover um amplificador de sustentação para osciladores baseados em ressonadores do tipo MEMS (Micro-Electro-Mechanical System). Entre outros, as peculiaridades de projeto envolvem um desafiante compromisso entre Ganho, Largura de Banda, Ruído e Consumo de potência. Sendo assim, o amplificador foi implementado através do cascateamento de quatro estágios de ganho similares, lançando-se mão de realimentação do tipo shunt-shunt para diminuir as impedâncias de entrada e saída. Através do emprego de um estágio de ganho variável, uma alta faixa dinâmica de ganho é alcançada (53 dB), com um ganho máximo de transimpedância de 118 dB'ômega'...Observação: O resumo, na íntegra, poderá ser visualizado no texto completo da tese digital
Abstract: A variable gain Transimpedance Amplifier (TIA) is presented. Realized in 0.18 'mi'm technology, this amplifier was conceived with the purpose of providing oscillation sustaining for Micro-Electro-Mechanical System (MEMS) based oscillators. Facing a quite challenging trade-off between Gain, Bandwidth, Noise and Power consumption, the TIA was implemented through the cascade of four similar gain stages, with the application of shunt-shunt feedback to lower both input and output resistances. With the employment of a variable-gain stage, this TIA presents a large gain tunability of 53 dB, with a also large maximum transimpedance gain of 118 dB'omega'...Note: The complete abstract is available with the full electronic document
Mestrado
Eletrônica, Microeletrônica e Optoeletrônica
Mestre em Engenharia Elétrica
35
Koeslag, Francois. "A detailed analysis of the imperfections of pulsewidth modulated waveforms on the output stage of a class D audio amplifier." Thesis, Stellenbosch : University of Stellenbosch, 2009. http://hdl.handle.net/10019.1/3972.
Full textAbstract:
Thesis (PhD (Electrical and Electronic Engineering))--University of Stellenbosch, 2009.Although the Class D topology offers several advantages, its use in audio amplification has previously been limited by the lack of competitiveness in fidelity compared to its linear counterparts. During the past decade, technological advances in semiconductor technology have awakened new interest since competitive levels of distortion could now be achieved. The output stage of such an amplifier is the primary limiting factor in its performance. In this dissertation, four non-ideal effects existing in this stage are identified and mathematically analysed. The analytical analysis makes use of a well-established mathematical model, based on the double Fourier series method, to model the imperfections introduced into a naturally sampled pulsewidth modulated waveform. The analysis is complemented by simulation using a strategy based on Newton’s numerical method. The theory is verified by a comparison between the analytical-, simulated- and experimental results.
36
Hur, Joonhoi. "A highly linear and efficient out-phasing transmitter for multi-band, multi-mode applications." Diss., Georgia Institute of Technology, 2010. http://hdl.handle.net/1853/42823.
Full textAbstract:
There have been many efforts to improve efficiency of transmitter while meeting stringent linearity requirement of modern communication system. Among the technology to enhance efficiency of linear transmitter, the out-phasing technologies, also called the linear amplification with nonlinear components (LINC), is considered as a promising technology. LINC has been studied long times, since it provides excellent linearity with high efficiency by allowing adopt high efficient switch-mode power amplifiers. However, The LINC transmitter has some technical challenges: linearity degradation due to amplitude and phase mismatches, efficiency degradation due to poor combining efficiency, and narrow frequency bandwidth due to output matching network of switching power amplifier.
In this thesis, some state-of-the-art techniques for solving the problems of LINC transmitters are presented. An unbalanced phase calibration technique compensates amplitude/phase mismatches between two parallel paths in the LINC system, and multi-level LINC (MLINC) and an uneven multi-level LINC (UMLINC) structure improve the overall power efficiency. And the reconfigurable Class-D switching PA enables multi-band operation with high efficiency and good linearity. With these techniques, the new multi-band out-phasing transmitter improves the efficiency without sacrificing the linearity performance.
37
Chen, Chih-Hung. "CMOS RF front-end design of a very narrowband transceiver with 0.18[micrometers]." To access this resource online via ProQuest Dissertations and Theses @ UTEP, 2008. http://0-proquest.umi.com.lib.utep.edu/login?COPT=REJTPTU0YmImSU5UPTAmVkVSPTI=&clientId=2515.
Full text
38
Oliveira, Thomaz Chaves de Andrade 1982. "Modelagem computacional de amplificadores valvulados." [s.n.], 2013. http://repositorio.unicamp.br/jspui/handle/REPOSIP/260790.
Full textAbstract:
Orientadores: Gilmar Barreto, Alexander Mattioli PasqualTese (doutorado) - Universidade Estadual de Campinas, Faculdade de Engenharia Elétrica e de Computação
Made available in DSpace on 2018-08-23T22:17:20Z (GMT). No. of bitstreams: 1 Oliveira_ThomazChavesdeAndrade_D.pdf: 15936759 bytes, checksum: 48f556ca43f2444416ba35ab9de64a79 (MD5) Previous issue date: 2013
Resumo: O Resumo poderá ser visualizado no texto completo da tese digital
Abstract: The complete Abstract is available with the full electronic document
Doutorado
Automação
Doutor em Engenharia Elétrica
39
Lee, Ockgoo. "High efficiency switching CMOS power amplifiers for wireless communications." Diss., Georgia Institute of Technology, 2009. http://hdl.handle.net/1853/37145.
Full textAbstract:
High-efficiency performance is one of the most important requirements of power
amplifiers (PAs) for wireless applications. However, the design of highly efficient CMOS
PAs for watt-level applications is a challenging task. This dissertation focuses on the
development of the design method for highly efficient CMOS PAs to overcome the
fundamental difficulties presented by CMOS technology.
In this dissertation, the design method and analysis for a high-power and highefficiency
class-E CMOS PA with a fully integrated transformer have been presented.
This work is the first effort to set up a comprehensive design methodology for a fully
integrated class-E CMOS PA including effects of an integrated transformer, which is
very crucial for watt-level power applications. In addition, to improve efficiency of
cascode class-E CMOS PAs, a charging acceleration technique is developed. The method
accelerates a charging speed to turn off the common-gate device in the off-state, thus
reducing the power loss. To demonstrate the proposed cascode class-E PA, a prototype
CMOS PA was implemented in a 0.18-μm CMOS process. Measurements show an
improvement of approximately 6% in the power added efficiency. The proposed cascode
class-E PA structure is suitable for the design of high-efficiency class-E PAs while it
reduces the voltage stress across the device.
40
Mays, Kenneth W. "A 40 GHz Power Amplifier Using a Low Cost High Volume 0.15 um Optical Lithography pHEMT Process." PDXScholar, 2013. https://pdxscholar.library.pdx.edu/open_access_etds/552.
Full textAbstract:
The demand for higher frequency applications is largely driven by bandwidth. The evolution of circuits in the microwave and millimeter frequency ranges always demands higher performance and lower cost as the technology and specification requirements evolve. Thus the development of new processes addressing higher frequencies and bandwidth requirements is essential to the growth of any semiconductor company participating in these markets. There exist processes which can perform in the higher frequency design space from a technical perspective. However, a cost effective solution must complement the technical merits for deployment. Thus a new 0.15 um optical lithography pHEMT process was developed at TriQuint Semiconductor to address this market segment. A 40 GHz power amplifier has been designed to quantify and showcase the capabilities of this new process by leveraging the existing processing knowledge and the implementation of high frequency scalable models. The three stage power amplifier was designed using the TOM4 scalable depletion mode FET model. The TriQuint TQP15 Design Kit also implements microstrip transmission line models that can be used for evaluating the interconnect lines and matching networks. The process also features substrate vias and the thin film resistor and MIM capacitor models which utilize the capabilities of the BCB process flow. During the design stage we extensively used Agilent ADS program for circuit and EM simulation in order to optimize the final design. Special attention was paid to proper sizing of devices, developing matching circuits, optimizing transmission lines and power combining. The final design exhibits good performance in the 40 GHz range using the new TQP15 process. The measured results show a gain of greater than 13 dB under 3 volt drain voltage and a linear output power of greater than 28 dBm at 40 GHz. The 40 GHz power amplifier demonstrates that the new process has successfully leveraged an existing manufacturing infrastructure and has achieved repeatability, high volume manufacturing, and low cost in the millimeter frequency range.
41
Kamanzi, Janvier. "Development of a low energy cooling technology for a mobile satellite ground station." Thesis, Cape Peninsula University of Technology, 2013. http://hdl.handle.net/20.500.11838/1072.
Full textAbstract:
Thesis submitted in fulfillment of the requirements for the degree
Master of Technology:Electrical Engineering
in the Faculty ofEngineering
at the Cape Peninsula University of Technology
Supervisor:Prof MTE KAHN
Bellville
December 2013The work presented in this thesis consists of the simulation of a cooling plant for a future mobile satellite ground station in order to minimize the effects of the thermal noise and to maintain comfort temperatures onboard the same station. Thermal problems encountered in mobile satellite ground stations are a source of poor quality signals and also of the premature destruction of the front end microwave amplifiers. In addition, they cause extreme discomfort to the mission operators aboard the mobile station especially in hot seasons. The main concerns of effective satellite system are the quality of the received signal and the lifespan of the front end low noise amplifier (LNA). Although the quality of the signal is affected by different sources of noise observed at various stages of a telecommunication system, thermal noise resulting from thermal agitation of electrons generated within the LNA is the predominant type. This thermal noise is the one that affects the sensitivity of the LNA and can lead to its destruction. Research indicated that this thermal noise can be minimized by using a suitable cooling system. A moveable truck was proposed as the equipment vehicle for a mobile ground station. In the process of the cooling system development, a detailed quantitative study on the effects of thermal noise on the LNA was conducted. To cool the LNA and the truck, a 2 kW solar electric vapor compression system was found the best for its compliance to the IEA standards: clean, human and environment friendly. The principal difficulty in the development of the cooling system was to design a photovoltaic topology that would ensure the solar panels were always exposed to the sun, regardless the situation of the truck. Simulation result suggested that a 3.3 kW three sided pyramid photovoltaic topology would be the most effective to supply the power to the cooling system. A battery system rated 48 V, 41.6 Ah was suggested to be charged by the PV system and then supply the power to the vapor compression system. The project was a success as the objective of this project has been met and the research questions were answered.
42
Al, Tanany Ahmed. "A Study of Switched Mode Power Amplifiers using LDMOS." Thesis, University of Gävle, Department of Technology and Built Environment, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-701.
Full textAbstract:
This work focuses on different kinds of Switch Mode Power Amplifiers (SMPAs) using LDMOS technologies. It involves a literature study of different SMPA concepts. Choosing the suitable class that achieves the high efficiency was the base stone of this
work. A push-pull class J power amplifier (PA) was designed with an integrated LC resonator inside the package using the bondwires and die capacitances. Analysis and motivation of the chosen class is included. Designing the suitable Input/Output printed circuit board (PCB) external circuits (i.e.; BALUN circuit, Matching network and DC
bias network) was part of the work. This work is done by ADS simulation and showed a simulated result of about 70% drain efficiency for 34 W output power and 16 dB gain at 2.14 GHz. Study of the losses in each part of the design elements is also included.
Another design at lower frequency (i.e.; at 0.94 GHz) was also simulated and compared to the previous design. The drain efficiency was 83% for 32 W output power and 15.4 dB Gain.
43
Chudá, Kateřina. "Silové obvody pro napájení magnetického ložiska." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2019. http://www.nusl.cz/ntk/nusl-401978.
Full textAbstract:
Magnetic bearings are used to keep objects in certain position via magnetic force. There is no creation of friction, because there is no touch. It is necessary to supply magnetic bearings with electric energy. Linear transistor amplifiers or switched-mode amplifiers can be used to supply them with electric energy.
44
Serrano, Guillermo J. "High Performance Analog Circuit Design Using Floating-Gate Techniques." Diss., Georgia Institute of Technology, 2007. http://hdl.handle.net/1853/19819.
Full textAbstract:
The programmability property of floating-gate transistors is exploited in this work to compensate for mismatch and device parameter variations in various high performance analog circuits. A careful look is taken at the characteristics and behavior of floating-gate transistors; issues such as programming, precision, accuracy, and charge retention are addressed. An alternate approach to reduce the offset voltage of the amplifier is presented. The proposed approach uses floating-gate transistors as programmable current sources that provide offset compensation while being a part of the amplifier of interest during normal operation. This results in an offset voltage cancelation that is independent of other amplifier parameters and does not dissipate additional power. Two compact programmable architectures that implement a voltage reference based on the charge difference between two floating-gate transistors are introduced. The references exhibit a low temperature coefficient (TC) as all the transistors temperature dependencies are canceled. Programming the charge on the floating-gate transistors provides the flexibility of an arbitrary accurate voltage reference with a single design and allows for a high initial accuracy of the reference. Also, this work presents a novel programmable temperature compensated current reference. The proposed circuit achieves a first order temperature compensation by canceling the negative TC of an on-chip poly resistor with the positive TC of a MOS transistor operating in the ohmic region. Programmability of the ohmic resistor enables optimal temperature compensation while programmability of the reference voltage allows for an accurate current reference for a wide range of values. Finally, this work combines the already established DAC design techniques with floating-gate circuits to obtain a high precision converter. This approach enables higher accuracy along with a substantial decrease of the die size.
45
Cartwright, Justin Adam. "A novel technique for harmonic cancellation in class D amplifiers a thesis presented to the faculty of the Graduate School, Tennessee Technological University /." Click to access online, 2009. http://proquest.umi.com/pqdweb?index=2&did=1759989201&SrchMode=1&sid=1&Fmt=6&VInst=PROD&VType=PQD&RQT=309&VName=PQD&TS=1250263495&clientId=28564.
Full text
46
Kim, Hyun-Woong. "CMOS RF transmitter front-end module for high-power mobile applications." Diss., Georgia Institute of Technology, 2012. http://hdl.handle.net/1853/47592.
Full textAbstract:
With the explosive growth of the wireless market, the demand for low-cost and highly-integrated radio frequency (RF) transceiver has been increased. Keeping up with this trend, complimentary metal-oxide-semiconductor (CMOS) has been spotlighted by virtue of its superior characteristics. However, there are challenges in achieving this goal, especially designing the transmitter portion. The objective of this research is to demonstrate the feasibility of fully integrated CMOS transmitter module which includes power amplifier (PA) and transmit/receive (T/R) switch by compensating for the intrinsic drawbacks of CMOS technology.
As an effort to overcome the challenges, the high-power handling T/R switches are introduced as the first part of this dissertation. The proposed differential switch topology and feed-forward capacitor helps reducing the voltage stress over the switch devices, enabling a linear power transmission. With the high-power T/R switches, a new transmitter front-end topology - differential PA and T/R switch topology with the multi-section PA output matching network - is also proposed. The multi-stage PA output matching network assists to relieve the voltage stress over the switch device even more, by providing a low switch operating impedance. By analyzing the power performance and efficiency of entire transmitter module, design methodology for the high-power handling and efficient transmitter module is established. Finally, the research in this dissertation provides low-cost, high-power handling, and efficient CMOS RF transmitter module for wireless applications.
47
Coen, Christopher T. "Development and integration of silicon-germanium front-end electronics for active phased-array antennas." Thesis, Georgia Institute of Technology, 2012. http://hdl.handle.net/1853/48990.
Full textAbstract:
The research presented in this thesis leverages silicon-germanium (SiGe) heterojunction bipolar transistor (HBT) technology to develop microwave front-end electronics for active phased-array antennas. The highly integrated electronics will reduce costs and improve the feasibility of snow measurements from airborne and space-borne platforms. Chapter 1 presents the motivation of this research, focusing on the technological needs of snow measurement missions. The fundamentals and benefits of SiGe HBTs and phased-array antennas for these missions are discussed as well. Chapter 2 discusses SiGe power amplifier design considerations for radar systems. Basic power amplifier design concepts, power limitations in SiGe HBTs, and techniques for increasing the output power of SiGe HBT PAs are reviewed. Chapter 3 presents the design and characterization of a robust medium power X-band SiGe power amplifier for integration into a SiGe transmit/receive module. The PA design process applies the concepts presented in Chapter 2. A detailed investigation into measurement-to-simulation discrepancies is outlined as well. Chapter 4 discusses the development and characterization of a single-chip X-band SiGe T/R module for integration into a very thin, lightweight active phased array antenna panel. The system-on-package antenna combines the high performance and integration potential of SiGe technologies with advanced substrates and packaging techniques to develop a high performance scalable antenna panel using relatively low-cost materials and silicon-based electronics. The antenna panel presented in this chapter will enable airborne SCLP measurements and advance the technology towards an eventual space-based SCLP measurement instrument that will satisfy a critical Earth science need. Finally, Chapter 5 provides concluding remarks and discusses future research directions.
48
Fedorenko, Pavlo. "Phase distortion in envelope elimination and restoration radio frequency power amplifiers." Diss., Georgia Institute of Technology, 2009. http://hdl.handle.net/1853/34822.
Full textAbstract:
The objective of this research is to analyze and improve linearity of envelope elimination and restoration (EER) radio frequency (RF) power amplifiers. Envelope elimination and restoration was compared to other efficiency enhancement techniques and determined to likely be the most suitable solution for implementation of multimode, multiband portable RF transmitters. Distortion, stemming from dynamic power-supply modulation of RF transistors in EER RF power amplifiers was identified as one of the key challenges to the development of commercially viable EER transmitters. This dissertation presents a study of phase distortion in RF power amplifiers (PAs) with emphasis on identification of the origins of phase distortion in EER RF power amplifiers. Circuit-level techniques for distortion mitigation are also presented.
Memory effects in conventional power amplifiers are investigated through the accurate measurement and analysis of phase asymmetry of out-of-band distortion components. Novel physically-based power amplifier model is developed for attributing measured memory effects to their physical origin. The amount of linearity correction, obtained through pre-distortion for a particular RF power amplifier, is then correlated to the behavior of the memory effects in the corresponding PA.
Heterojunction field-effect transistor and heterojunction bipolar transistor amplifiers are used for investigation of voltage-dependent phase distortion in handset EER RF PAs. The distortion is found to stem from vector addition of signals, generated in nonlinear circuit elements of the PA. Specifically, nonlinear base-collector capacitance and downconversion of distortion components from second harmonic frequency are found to be the dominant sources of phase distortion.
Shorting of second harmonic is proposed as a way to reduce the distortion contribution of the downconverted signal. Phase distortion is reduced by 50%, however a slight degradation in the amplitude distortion is observed. Push-pull architecture is proposed for EER RF power amplifiers to cancel distortion components, generated in the nonlinear base-collector capacitance. Push-pull implementation enables a 67% reduction in phase distortion, accompanied by a 1-2 dB reduction in amplitude distortion in EER RF power amplifiers.
This work, combined with other studies in the field, will help advance the development of multimode, multiband portable RF transmitters, based on the envelope elimination and restoration architecture.
49
Grantham, Clayton Bruce 1955. "A PARAMETRIC STUDY AND REDESIGN OF THE BLAUSCHILD HIGH SPEED INSTRUMENTATION AMPLIFIER ARCHITECTURE." Thesis, The University of Arizona, 1987. http://hdl.handle.net/10150/276494.
Full textAbstract:
This work contains the analysis and redesign of a translinear circuit. This circuit appeared in the article by Robert Blauschild. The Blauschild circuit was analyzed on H-SPICE, a VAX computer circuit analysis program, with Burr-Brown Integrated Circuit Process 30 models. Circuit improvement to input voltage to current converter stage and circuit simplification of the output stage were implemented and simulated in the redesign. The results of the two simulations were compared, which showed that the improvements were valid and useful. Going through this redesign cycle of circuit analysis, computer simulation and bread-boarding served as an actual design engineering application with a real problem, solution, and result scenarios.
50
Schmid, Robert L. "Design of a reconfigurable low-noise amplifier in a silicon-germanium process for radar applications." Thesis, Georgia Institute of Technology, 2012. http://hdl.handle.net/1853/47642.
Full textAbstract:
This thesis describes a unique approach of turning on and off transistor cores to reconfigure low-noise amplifiers. A small footprint single-pole, single-throw switch is optimized for low insertion loss and high isolation. A narrowband (non-switchable) LNA is developed as a basis of comparison for reconfigurable designs. The optimized switch is incorporated into different switchable transistor core architectures. These architectures are investigated to determine their ability to reconfigure amplifier performance. One switchable transistor core topology is integrated into a cascode LNA design. An in depth stability analysis employing the S-probe technique is used to help improve the reliability of the cascode design. In addition, a single-pole, double-throw transmit/receive switch, as well as a deserializer are developed to help support the LNA block in a reconfigurable phased-array radar system. This type of flexible radar design is very beneficial in challenging electromagnetic environments.