Log in

Relevant bibliographies by topics / Electronic temperature / Dissertations / Theses

To see the other types of publications on this topic, follow the link: Electronic temperature.

Dissertations / Theses on the topic 'Electronic temperature'

Author: Grafiati

Published: 4 June 2021

Last updated: 11 February 2022

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the top 50 dissertations / theses for your research on the topic 'Electronic temperature.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Browse dissertations / theses on a wide variety of disciplines and organise your bibliography correctly.

1

Smarra, Devin A. "Low Temperature Co-Fired Ceramic (LTCC) Substrate for High Temperature Microelectronics." University of Dayton / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=dayton1493386231571894.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Wagner, Thomas. "Low temperature silicon epitaxy defects and electronic properties /." [S.l. : s.n.], 2003. http://www.bsz-bw.de/cgi-bin/xvms.cgi?SWB10678419.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Lebel, Larry. "Electronic temperature sensor arrays for gas turbine components." Mémoire, Université de Sherbrooke, 2004. http://savoirs.usherbrooke.ca/handle/11143/1255.

Full text

Abstract:

The current master's thesis presents the development of a new temperature sensing technology for gas turbine components.The proposed sensor array allows real time simultaneous measurements of temperature at multiple locations, using only two communication leads. Frequency modulation is used to multiplex the signals of more than ten temperature sensors through common wires. At every point of reading, silicon carbide (SiC) microelectronic oscillators generate the required waveforms, at frequencies that are temperature dependent. Those oscillators are fed with a common DC power source, and add th

APA, Harvard, Vancouver, ISO, and other styles

4

Fallas, Chinchilla Juan Carlos. "Pressure-temperature phase diagram of LiA1H₄." abstract and full text PDF (UNR users only), 2009. http://0-gateway.proquest.com.innopac.library.unr.edu/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:1464434.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Sapsai, Andrei. "Temperature distribution and thermally induced stresses in electronic packages." Thesis, Monterey, California. Naval Postgraduate School, 1992. http://hdl.handle.net/10945/24065.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Hou, Michelle M. (Michelle Ming-Jan). "Low temperature transient liquid phase bonding for electronic packaging." Thesis, Massachusetts Institute of Technology, 1992. http://hdl.handle.net/1721.1/60735.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Badenhorst, Le Roux. "Cryogenic amplifiers for interfacing superconductive systems to room temperature electronics." Thesis, Stellenbosch : Stellenbosch University, 2008. http://hdl.handle.net/10019.1/1586.

Full text

Abstract:

Thesis (MScEng (Electrical and Electronic Engineering))--Stellenbosch University, 2008.<br>This thesis is aimed at testing commercially available CMOS amplifier ICs at 4 K. Super Conducting Electronics (SCE) will also be used to amplify RSFQ signals for easier detection by CMOS technology and better signal-to-noise ratios. The SCE comprises of a Suzuki stack amplifier, a 250 μA JTL and a DC-to-SFQ converter. The Suzuki stack amplifier is simulated in WRSPICE. It is able to amplify an SFQ signal synchronised with an external clock signal. The amplified signal can then be detected by a no

APA, Harvard, Vancouver, ISO, and other styles

8

Chen, Minghan. "Optical studies of high temperature superconductors and electronic dielectric materials." [Gainesville, Fla.] : University of Florida, 2005. http://purl.fcla.edu/fcla/etd/UFE0012986.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Wagner, Thomas [Verfasser]. "Low temperature silicon epitaxy : Defects and electronic properties / Thomas Wagner." Aachen : Shaker, 2003. http://d-nb.info/1179037057/34.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Musallam, Mahera. "Real-time power electronic device junction temperature estimation and control." Thesis, University of Newcastle Upon Tyne, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.420031.

Full text

APA, Harvard, Vancouver, ISO, and other styles

11

Chan, Ka Keung. "Electronic properties of room temperature deposited thin-film carbon/diamond." Thesis, University of Cambridge, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.260488.

Full text

APA, Harvard, Vancouver, ISO, and other styles

12

Mackay, Kenneth Donald. "The low temperature electronic transport properties of amorphous metallic alloys." Thesis, University of Cambridge, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.386132.

Full text

APA, Harvard, Vancouver, ISO, and other styles

13

Ribeiro, Tiago Castro. "Electronic properties of doped Mott insulators and high temperature superconductors." Thesis, Massachusetts Institute of Technology, 2005. http://hdl.handle.net/1721.1/34383.

Full text

Abstract:

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Physics, 2005.<br>Includes bibliographical references (p. 129-140).<br>High-temperature superconducting cuprates, which are the quintessential example of a strongly correlated system and the most extensively studied materials after semiconductors, spurred the development in the fields of material science and experimental and theoretical physics. As first noted by Anderson, these materials are doped Mott insulators and the novel phenomenology emerges in the regime intermediate to the Neel state and the Fermi liquid metal where ele

APA, Harvard, Vancouver, ISO, and other styles

14

Wade, James Matthew. "Calorimetry studies of high temperature superconductors." Thesis, University of Cambridge, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.363078.

Full text

APA, Harvard, Vancouver, ISO, and other styles

15

Truong, L. H. "Dielectrics for high temperature superconducting applications." Thesis, University of Southampton, 2013. https://eprints.soton.ac.uk/355538/.

Full text

Abstract:

This thesis is concerned with the development of condition monitoring for future design of high temperature superconducting (HTS) power apparatus. In particular, the use of UHF sensing for detecting PD activity within HTS has been investigated. Obtained results indicate that fast current pulses during PD in LN2 radiate electromagnetic waves which can be captured by the UHF sensor. PD during a negative streamer in LN2 appears in the form of a series of pulses less than 1 μs apart. This sequence cannot be observed using conventional detection method due to its bandwidth limitation. Instead, a sl

APA, Harvard, Vancouver, ISO, and other styles

16

Chang, Johan. "Magnetic and electronic properties of the high-temperature superconductor La₂₋xSrxCuO₄ /." Zürich : ETH, 2008. http://e-collection.ethbib.ethz.ch/show?type=diss&nr=17699.

Full text

APA, Harvard, Vancouver, ISO, and other styles

17

Douglas, J. Fraser. "The isotope effect on the electronic structure of high temperature superconductors." Connect to online resource, 2008. http://gateway.proquest.com/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:3337050.

Full text

APA, Harvard, Vancouver, ISO, and other styles

18

Mascaro, Mark Daniel. "Temperature effects on the electronic conductivity of single-walled carbon nanotubes." Thesis, Massachusetts Institute of Technology, 2007. http://hdl.handle.net/1721.1/44817.

Full text

Abstract:

Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 2007.<br>Includes bibliographical references (p. 57-59).<br>The room-temperature electronic conductivity and temperature dependence of conductivity were measured for samples of carbon nanotubes of three types: pristine; functionalized with a nitrobenzene covalent functionalization, which are expected to display poor electronic conductivity; and functionalized with a carbene covalent functionalization, which are expected to display pristine-like conductivity. Measurements were taken via four-point

APA, Harvard, Vancouver, ISO, and other styles

19

Reynolds, Bryan. "Electronic Transport Properties of Nanonstructured Semiconductors: Temperature Dependence and Size Effects." University of Cincinnati / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1463130513.

Full text

APA, Harvard, Vancouver, ISO, and other styles

20

Pilgrim, James A. "Circuit rating methods for high temperature cables." Thesis, University of Southampton, 2011. https://eprints.soton.ac.uk/195003/.

Full text

Abstract:

For the safe and efficient operation of power transmission systems, each system compo-nent must have an accurate current rating. Since the advent of formal power networks a wide variety of methods have been employed to calculate the current carrying capacity of power cables, ranging from simple analytical equations to complex numerical simulations. In the present climate of increasing power demand, but where finance for large scale network reinforcement schemes is limited, providing an accurate rating becomes paramount to the safe operation of the transmission network. Although the majority of

APA, Harvard, Vancouver, ISO, and other styles

21

Sucharitakul, Sukrit. "2D ELECTRONIC SYSTEMS IN LAYERED SEMICONDUCTING MATERIALS." Case Western Reserve University School of Graduate Studies / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=case1491497351482802.

Full text

APA, Harvard, Vancouver, ISO, and other styles

22

Jones, Alexander R. "The application of temperature sensors into fabric substrates." Thesis, Kansas State University, 2011. http://hdl.handle.net/2097/11991.

Full text

Abstract:

Master of Science<br>Department of Apparel, Textiles, and Interior Design<br>Diana Sindicich<br>With continuing advancements in the area of electronics, there are more ways in which they are utilized in order to improve the lives of humans. These advancements have to led to the incorporation of electronic components into fabric structures, creating electronic textiles (e-textiles). As it has become possible to place small electrical components within clothing without the performance of the electronics being hampered, research has been conducted in the use of e-textiles in measuring aspects of

APA, Harvard, Vancouver, ISO, and other styles

23

Li, Qi. "A pair of stationary stochastic processes with application to Wichita temperature data." Thesis, Wichita State University, 2010. http://hdl.handle.net/10057/3644.

Full text

Abstract:

The thesis investigates a pair of stationary stochastic process models whose domains are the set of integers and the set of real numbers respectively. The stationary processes with our specific correlation functions include the discrete and continuous first and second order autoregressive processes as their special cases. The maximum likelihood method is then applied to obtain the nonlinear equation system for the maximum likelihood estimators of the model parameters and the solutions are found by using the deepest gradient algorithm. The advantage of the algorithm lies in the calculation coul

APA, Harvard, Vancouver, ISO, and other styles

24

Vo, Tien Minh. "Cure temperature variation and hygrothermal effects on an out-of-autoclave polymer composite." Thesis, Wichita State University, 2012. http://hdl.handle.net/10057/5431.

Full text

Abstract:

The effects of cure temperature variation and hygrothermal conditioning on thermal, physical, and mechanical properties of an out-of-autoclave prepreg were investigated and correlated. To study the effects of cure temperature variation, intermediate-cure temperature, second ramp rate, and post-cure temperature were varied from a recommended two-stage cure cycle. The effects of adverse environmental conditions on the cure temperature variation were studied by conditioning the samples in boiling water and a conditioning chamber. The material’s cure state was monitored using a Different Scanning

APA, Harvard, Vancouver, ISO, and other styles

25

Gernaat, Christopher Ronald. "Correlation between rheological and mechanical properties in a low-temperature cure prepreg composite." Thesis, Wichita State University, 2008. http://hdl.handle.net/10057/2090.

Full text

Abstract:

With an ever growing fleet of commercial airplanes utilizing composite structures, it is increasingly important to develop cost-effective and robust repair procedures. Issues invariably occur during on-site repair which casts doubt on the structural suitability of the part. This makes the ability to quantify the relationship between dwell temperature, cure state, and mechanical properties extremely important. Curing temperatures play a vital role in the difficulty of repairs. Lower cure temperatures mean lower cost, less possibility of damage to surrounding material, and therefore, the potenti

APA, Harvard, Vancouver, ISO, and other styles

26

Ruppert, Jesse. "Development of zirconia-based mesoporous materials for intermediate-temperature solid-oxide fuel cells." abstract and full text PDF (UNR users only), 2009. http://0-gateway.proquest.com.innopac.library.unr.edu/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:1472975.

Full text

APA, Harvard, Vancouver, ISO, and other styles

27

Gernaat, Christopher Ronald Minaie Bob. "Correlation between rheological and mechanical properties in a low-temperature cure prepreg composite." A link to full text of this thesis in SOAR, 2008. http://hdl.handle.net/10057/2090.

Full text

Abstract:

Wichita State University, College of Engineering, Dept. of Mechanical Engineering<br>Copyright 2008 by Christopher Ronald Gernaat. All Rights Reserved. Includes bibliographic references (leaves 89-92).

APA, Harvard, Vancouver, ISO, and other styles

28

French, Roger Harquail. "Electronic structure of A12O3 : VUV reflectivity measurements from room temperature to 1100C̊." Thesis, Massachusetts Institute of Technology, 1985. http://hdl.handle.net/1721.1/86250.

Full text

Abstract:

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 1985.<br>MICROFICHE COPY AVAILABLE IN ARCHIVES AND SCIENCE.<br>Includes bibliographical references.<br>by Roger Harquail French.<br>Ph.D.

APA, Harvard, Vancouver, ISO, and other styles

29

Yue, Naili. "Planar Packaging and Electrical Characterization of High Temperature SiC Power Electronic Devices." Thesis, Virginia Tech, 2008. http://hdl.handle.net/10919/36278.

Full text

Abstract:

This thesis examines the packaging of high-temperature SiC power electronic devices. Current-voltage measurements were conducted on as-received and packaged SiC power devices. The planar structure was introduced and developed as a substitution for traditional wire-bonding vertical structure. The planar structure was applied to a high temperature (>250oC) SiC power device. Based on the current-voltage (I-V) measurements, the packaging structures were improved, materials were selected, and processes were tightly controlled. This study applies two types of planar structures, the direct bond and

APA, Harvard, Vancouver, ISO, and other styles

30

Williams, Michael Eric. "Ab-initio elastic and thermodynamic properties of high-temperature cubic intermetallics at finite temperatures." [College Station, Tex. : Texas A&M University, 2008. http://hdl.handle.net/1969.1/ETD-TAMU-2779.

Full text

APA, Harvard, Vancouver, ISO, and other styles

31

Won, Pei C. "Exploitation of fibre characteristics in temperature sensing and radio-over-fibre applications." Thesis, Aston University, 2005. http://publications.aston.ac.uk/8014/.

Full text

Abstract:

The development of sensing devices is one of the instrumentation fields that has grown rapidly in the last decade. Corresponding to the swift advance in the development of microelectronic sensors, optical fibre sensors are widely investigated because of their advantageous properties over the electronics sensors such as their wavelength multiplexing capability and high sensitivity to temperature, pressure, strain, vibration and acoustic emission. Moreover, optical fibre sensors are more attractive than the electronics sensors as they can perform distributed sensing, in terms of covering a reaso

APA, Harvard, Vancouver, ISO, and other styles

32

Dumpala, Bindya. "Design, construction, optimization, and characterization of a temperature control system for studying the effects of a rapid and reversible changes in temperature on neurosecretion." abstract and full text PDF (free order & download UNR users only), 2006. http://0-gateway.proquest.com.innopac.library.unr.edu/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:1438916.

Full text

APA, Harvard, Vancouver, ISO, and other styles

33

Suman, Shivesh K. "Characterization of temperature variation during the wire bonding process." Thesis, Georgia Institute of Technology, 2002. http://hdl.handle.net/1853/17560.

Full text

APA, Harvard, Vancouver, ISO, and other styles

34

De, Villiers Hendrik Adrianus Cornelis. "A process for the manufacture of high temperature bi-epitaxial Josephson Junctions /." Thesis, Link to the online version, 2007. http://hdl.handle.net/10019/416.

Full text

APA, Harvard, Vancouver, ISO, and other styles

35

Price, Andrew Robert. "Hybrid Monte Carlo studies of high temperature superconductors." Thesis, University of Southampton, 2000. https://eprints.soton.ac.uk/45906/.

Full text

Abstract:

In this thesis we have developed a Hybrid Monte Carlo simulation of the vortex state in layered high-temperature superconductors. A set of potentials that govern vortex behaviour are derived from the Lawrence-Doniach free-energy functional which incorporate (i) intra-layer coupling (ii) inter-layer Josephson and electromagnetic interactions. We develop an extensive set of system observables that enable detailed studies of the structural properties of the vortex state. Naïve truncation of the long range intra-layer potential is shown to cause incorrect physical behaviour. We present two methods

APA, Harvard, Vancouver, ISO, and other styles

36

Vedula, Ramakrishna. "Materials for High Temperature Thin Film Thermocouple Applications." Thesis, Virginia Tech, 1998. http://hdl.handle.net/10919/46493.

Full text

Abstract:

The thermocouple systems used for the measurement of surface temperature in high temperature applications such as advanced aerospace propulsion systems and diesel engine systems are expected to perform in rapidly fluctuating and extremely high heat fluxes corresponding to high temperatures (in excess of 1400 K) and high speed flows. Traditionally, Pt/Pt-Rh based thin film thermocouples have been used for surface temperature measurements. However, recent studies indicated several problems associated with these thermocouples at temperatures exceeding 1000 K, some of which include poor adhesion t

APA, Harvard, Vancouver, ISO, and other styles

37

Michel, Florence. "Transient numerical computation of the temperature of the electronic equipment in passenger cars." Göttingen Cuvillier, 2009. http://d-nb.info/1000128997/04.

Full text

APA, Harvard, Vancouver, ISO, and other styles

38

Michel, Florence. "Transient numerical computation of the temperature of the electronic equipment in passengers cars." Valenciennes, 2009. http://ged.univ-valenciennes.fr/nuxeo/site/esupversions/0c0e0027-679d-4983-a115-263443a25c8a.

Full text

Abstract:

Afin d’assurer la fiabilité des composants électroniques d’un véhicule, leur situation thermique est évaluée successivement à chaque phase du processus de développement. En particulier, il s’agit d’estimer la durée pendant laquelle le système électronique travaille dans son régime optimal de température, alors qu’il est soumis à des conditions de fonctionnement critiques. Pour le calcul de sa température dans des conditions de charge thermique instationnaires, différents modèles numériques et méthodes de simulation ont été développés et validés dans l’étude présente. Dans une première partie,

APA, Harvard, Vancouver, ISO, and other styles

39

Chan, Yu Hin. "Optimization of metallization and process variables in low temperature wire bonding technology /." View Abstract or Full-Text, 2003. http://library.ust.hk/cgi/db/thesis.pl?MECH%202003%20CHAN.

Full text

Abstract:

Thesis (M. Phil.)--Hong Kong University of Science and Technology, 2003.<br>Includes bibliographical references (leaves 129-132). Also available in electronic version. Access restricted to campus users.

APA, Harvard, Vancouver, ISO, and other styles

40

Samman, A.-R. "An investigation of control and feedback mechanisms in constant temperature anemometry." Thesis, University of Essex, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.354011.

Full text

APA, Harvard, Vancouver, ISO, and other styles

41

Bansil, M. S. "Computer modelling of Bourdon gauges used for pressure and temperature sensing." Thesis, City University London, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.354897.

Full text

APA, Harvard, Vancouver, ISO, and other styles

42

Zhao, Chao. "Low temperature synthesis of nanostructured oxides for dye sensitized solar cells." Thesis, Northumbria University, 2016. http://nrl.northumbria.ac.uk/30220/.

Full text

Abstract:

Dye-sensitised solar cells (DSSCs) based on metal oxide semiconductor photoanodes (i.e. TiO2, ZnO) offer a promising route for low-cost and transparent solar cells, especially suitable for indoor/outdoor applications, building and automotive integrated electricity generation. Apart from developing new dyes (or absorbers) for increasing absorption and stable fast-regenerated electrolytes, improving metal oxide photoanodes has also gained great research attention. In a conventional DSSC, the mesoporous TiO2 photoanodes assembled by TiO2 nanoparticles can support large surface areas for sufficien

APA, Harvard, Vancouver, ISO, and other styles

43

Wilkening, Jennifer L. "Effects of vegetation and temperature on pika (Ochotona princeps) extirpations in the Great Basin." abstract only (free order & download UNR users only), 2007. http://0-gateway.proquest.com.innopac.library.unr.edu/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:1446422.

Full text

APA, Harvard, Vancouver, ISO, and other styles

44

Feher, M. "High temperature photoelectron and chemielectron studies of some small molecules in the gas phase." Thesis, University of Southampton, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.380294.

Full text

APA, Harvard, Vancouver, ISO, and other styles

45

Lincoln, Derek M. "The electronic structure and field effects of an organic-based room temperature magnetic semiconductor." Columbus, Ohio : Ohio State University, 2007. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1193833038.

Full text

APA, Harvard, Vancouver, ISO, and other styles

46

Pang, Lisa Yee San. "Thin film diamond : electronic devices for high temperature, high power and high radiation applications." Thesis, University College London (University of London), 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.313317.

Full text

APA, Harvard, Vancouver, ISO, and other styles

47

Nag, Pranab Kumar. "Unusual electronic properties in LiFeAs probed by low temperature scanning tunneling microscopy and spectroscopy." Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2017. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-231628.

Full text

Abstract:

In this thesis, the electronic properties in superconducting LiFeAs single crystal are investigated using low temperature scanning tunneling microscopy and spectroscopy (STM/S) at various temperatures. For this purpose, the differential conductance (dI/dV) measured by STS which is directly proportional to the local density of states (LDOS) of the sample to the sub-atomic precision, is used together with the topography information. The dI/dV spectra within the ±1 V energy range reveal a characteristic feature at around -350 mV to -400 mV in stoichiometric LiFeAs. This feature seems to be a univ

APA, Harvard, Vancouver, ISO, and other styles

48

Narri, Vandana. "Performance and Improvement Investigation of Accelerated Temperature Change Test." Thesis, Blekinge Tekniska Högskola, Institutionen för tillämpad signalbehandling, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-16604.

Full text

Abstract:

This thesis is focused on Accelerated Temperature Change Test (ATCT). This test is performed in order to deteriorate and age a product in a faster than natural way. The ATCTs are primarily controlled with four parameters: the temperature range (∆T), ramp rate (RR), dwell time (DT) and number of cycles in test ( . A comprehensive investigation was carried out to analyze the performance and functionality of the cabinet, used for performing ATCT. This was achieved by performing repeated measurements in the empty cabinet with different combinations of temperature range (∆T) and dwell time (DT). Th

APA, Harvard, Vancouver, ISO, and other styles

49

De, Villiers Gerrit Johannes. "In-core temperature measurement for the PBMR using fibre-bragg gratings." Thesis, Stellenbosch : University of Stellenbosch, 2009. http://hdl.handle.net/10019.1/2867.

Full text

Abstract:

Thesis (MScEng (Electrical and Electronic Engineering))--University of Stellenbosch, 2009.<br>The PBMR has called for research into the possibility of distributed in-core temperature measurement. In this thesis, several methods for distributed temperature measurement in high-pressure, -radiation and -temperature environments have been investigated by means of a literature study. The literature study has revealed FBG temperature sensors as the most feasible solution to the temperature measurement challenge. Various parameters affecting the propagation of light in optical fibres and conse

APA, Harvard, Vancouver, ISO, and other styles

50

Cho, Chun Hyung Jaeger Richard C. Suhling J. C. "Experimental characterization of the temperature dependence of the piezoresistive coefficients of silicon." Auburn, Ala., 2007. http://repo.lib.auburn.edu/Send%2002-04-08/CHO_CHUN_21.pdf.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!