Log in

Relevant bibliographies by topics / Electropumps

Contents

Journal articles
Dissertations / Theses
Conference papers
Reports

Academic literature on the topic 'Electropumps'

Author: Grafiati

Published: 28 May 2022

Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Electropumps.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Electropumps"

1

Harris, John, and A. C. Rose-Innes. "EMF, PD and electropumps." Physics Education 21, no. 3 (1986): 137. http://dx.doi.org/10.1088/0031-9120/21/3/105.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Sadeghi, H., J. Poshtan, N. K. Poulsen, and H. Niemann. "Estimating the Density of Fluid in a Pipeline System with an Electropump." Journal of Pipeline Systems Engineering and Practice 9, no. 2 (2018): 06018002. http://dx.doi.org/10.1061/(asce)ps.1949-1204.0000320.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Jafari, Hamideh, Javad Poshtan, and Hamed Sadeghi. "Application of fuzzy data fusion theory in fault diagnosis of rotating machinery." Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering 232, no. 8 (2018): 1015–24. http://dx.doi.org/10.1177/0959651818772935.

Full text

Abstract:

In this article, the most common induction motor faults including bearing outer race defect, broken rotor bar, and short-circuit of stator windings are diagnosed with high reliability. The decentralized fuzzy-integral data fusion method is used for information fusion in feature level. In the proposed scheme, the feature vectors are constructed using signatures created by time-domain characteristics obtained from stator three-phase current measurements. Partial matching of each feature is calculated by the fuzzy c-mean classifier algorithm, and features with high diagnosis ability are fused by

APA, Harvard, Vancouver, ISO, and other styles

4

Płaczek, Marek, and Grzegorz Kokot. "Modelling and Laboratory Tests of the Temperature Influence on the Efficiency of the Energy Harvesting System Based on MFC Piezoelectric Transducers." Sensors 19, no. 7 (2019): 1558. http://dx.doi.org/10.3390/s19071558.

Full text

Abstract:

Macro Fibre Composites (MFC) are very effective piezoelectric transducers that, among others, can be used as elements of energy harvesting systems. The possibility to generate electric energy, for example, from mechanical vibrations in order to power electrical elements that could not be powered in another way (using wires or batteries) is a great solution. However, such a kind of systems has to be designed by considering all phenomena that could occur during the exploitation of the system. One of those phenomena is the temperature fluctuation during the device operation. In the presented rese

APA, Harvard, Vancouver, ISO, and other styles

5

Merry, Kohle, Christopher Napier, Vivian Chung, et al. "The Validity and Reliability of Two Commercially Available Load Sensors for Clinical Strength Assessment." Sensors 21, no. 24 (2021): 8399. http://dx.doi.org/10.3390/s21248399.

Full text

Abstract:

Objective: Handheld dynamometers are common tools for assessing/monitoring muscular strength and endurance. Health/fitness Bluetooth load sensors may provide a cost-effective alternative; however, research is needed to evaluate the validity and reliability of such devices. This study assessed the validity and reliability of two commercially available Bluetooth load sensors (Activ5 by Activbody and Progressor by Tindeq). Methods: Four tests were conducted on each device: stepped loading, stress relaxation, simulated exercise, and hysteresis. Each test type was repeated three times using the Ins

APA, Harvard, Vancouver, ISO, and other styles

6

Sousa-Santos, Catarina, Sofia Sousa-Santos, Joana Mendes, et al. "The Influence of the Diameter of Orthodontic Mini-Implants on Primary Stability: Bending Tests—An In Vitro Study." Materials 17, no. 13 (2024): 3149. http://dx.doi.org/10.3390/ma17133149.

Full text

Abstract:

Orthodontic Mini-Implants have a high success rate, but it is crucial to assess the load that they bear in order to maintain their primary stability. Increasing the diameter can improve this stability, but there are limitations due to the proximity of the tooth roots. To avoid damage, smaller diameters are used, which can decrease resistance and cause permanent deformations. Objective: The objective of this study is to evaluate the influence of the diameter of Mini-Implants through bending force tests, taking into account primary stability after one and two insertions. Methods: Here, 40 Ti6AI4

APA, Harvard, Vancouver, ISO, and other styles

7

Missau, T., AB Venturini, GKR Pereira, C. Prochnow, LF Valandro, and MP Rippe. "Fatigue Failure Load of Restored Premolars: Effect of Etching the Intaglio Surface of Ceramic Inlays With Hydrofluoric Acid at Different Concentrations." Operative Dentistry 43, no. 2 (2018): E81—E91. http://dx.doi.org/10.2341/16-345-l.

Full text

Abstract:

SUMMARY The aim of this study was to evaluate the effect of etching, with different hydrofluoric acid concentrations at the intaglio surface of feldspathic ceramic inlays, on the fatigue failure load of restored premolars. A total of 60 upper premolars were embedded in plastic cylinders with acrylic resin (up to 3 mm below the cement-enamel junction) and prepared using a device specially designed for that purpose. Teeth were randomly assigned to three groups (n=20): HF1, HF5, and HF10 (etching with hydrofluoric acid for 60 seconds at concentrations of 1%, 5%, and 10%, respectively). Preparatio

APA, Harvard, Vancouver, ISO, and other styles

8

Körtvélyessy, Győző, Dávid Botond Hangyási, Tamás Tarjányi, et al. "Static and dynamic compression load tests of conically connected, screw fixed dental abutment." Analecta Technica Szegedinensia 17, no. 3 (2023): 1–12. http://dx.doi.org/10.14232/analecta.2023.3.1-12.

Full text

Abstract:

The basis of the long-term success of dental implants is the mechanical stability of the implant and the superstructure anchored in it. In order to investigate the mechanical behaviour of the conical connection in implant-abutment units, static and dynamic load tests were performed with different conical angles and various Grade 4-5 titanium implant materials. The assembled units were mounted in self-developed loading machine and in an Instron ElectroPuls E3000 fatigue machine. For static loading, the samples were loaded with a force from 0 N to 500 N in steps of 100 N. For dynamic loading, th

APA, Harvard, Vancouver, ISO, and other styles

9

Cai, Joanne, Kathryn Houg, and Dan Romanyk. "Changes in the Mechanical Response of Dental Stone to Submersion in Saline." Alberta Academic Review 2, no. 2 (2019): 19–20. http://dx.doi.org/10.29173/aar55.

Full text

Abstract:

Previously, dental stone has been utilized in mechanical testing of the periodontal ligament, which connects the tooth to the alveolar bone. This was achieved by casting swine mandibles in dental stone for displacement controlled testing. The stone was used as a riding base to hold the mandible in place. However, this was done in dry, ex vivo conditions, failing to simulate the natural presence of vascular fluid in the periodontal ligament. While this can be simulated with submersion in saline, the mechanical response of dental stone to saline is currently unknown, and thus cannot yet be used

APA, Harvard, Vancouver, ISO, and other styles

10

Bowden, Matt. "A Survay on Photovoltaics Technology for Water Pumping." Journal of Machine and Computing, April 5, 2021, 86–96. http://dx.doi.org/10.53759/7669/jmc202101010.

Full text

Abstract:

Due to the evident shortfalls in the high costs of diesel and current, the requirements of pumping for agricultural and aqua supply have been affected. In that regard, utilizing solar energy to pump aqua is a potential technology for diesel-driven and conventional propelling structures. Propelling aqua using solar energy is done using photovoltaics techniques that transform energy from the sun into useful power meant to operate AC or DC engine-driven hydraulic ram. This research contribution provides a critical evaluation of the solar propelling technology e.g. Maximum Power-Point Trackers (MP

APA, Harvard, Vancouver, ISO, and other styles

Dissertations / Theses on the topic "Electropumps"

1

Молошний, Олександр Миколайович, Александр Николаевич Молошный, Oleksandr Mykolaiovych Moloshnyi, Микола Іванович Сотник, Николай Иванович Сотник та Mykola Ivanovych Sotnyk. "Вплив ексцентриситету ротора на магнітне притягання в приводі герметичного електронасоса". Thesis, Сумський державний університет, 2016. http://essuir.sumdu.edu.ua/handle/123456789/45559.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Electropumps"

1

Clemon, Lee, and Karan Christopher. "Increased Strength of 3D Printed Parts With Z-Pin Approach." In ASME 2021 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/imece2021-67743.

Full text

Abstract:

Abstract Current extrusion-based 3D printing technologies adopt a layer-by-layer material deposition approach which is equivalent to stacking layers of material. This traditional 2.5D deposition plan is limited to depositing discrete, cross-sectional layers of the model. Such stacked layers are well known to induce anisotropic material behavior subject to part orientation during fabrication. Parts are loaded in their build direction (perpendicularly to layers), have up to a 50% decrease in tensile strength, and a significant 95% decrease in toughness when compared to x-y plane loading. In this

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Electropumps"

1

Calcagno, Barbara O. Acquisition of an Instron Electropuls E3000 Instrument for Mechanical Testing. Defense Technical Information Center, 2015. http://dx.doi.org/10.21236/ad1001064.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!