Log in

Relevant bibliographies by topics / Electrostatic discharge

Contents

Journal articles
Dissertations / Theses
Books
Book chapters
Conference papers
Reports

Academic literature on the topic 'Electrostatic discharge'

Author: Grafiati

Published: 4 June 2021

Last updated: 16 June 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'Electrostatic discharge.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "Electrostatic discharge"

1

Meniconi, M. "Electrostatic discharge." International Journal of Quality & Reliability Management 14, no. 3 (1997): 301–8. http://dx.doi.org/10.1108/02656719710165509.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Voldman, Steven. "Nano electrostatic discharge." IEEE Nanotechnology Magazine 3, no. 3 (2009): 12–15. http://dx.doi.org/10.1109/mnano.2009.934212.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Sadiku, M. N. O., and C. M. Akujuobi. "Electrostatic discharge (ESD)." IEEE Potentials 23, no. 5 (2004): 39–41. http://dx.doi.org/10.1109/mp.2004.1301247.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Fotis, Georgios, Vasiliki Vita, and Lambros Ekonomou. "Machine Learning Techniques for the Prediction of the Magnetic and Electric Field of Electrostatic Discharges." Electronics 11, no. 12 (2022): 1858. http://dx.doi.org/10.3390/electronics11121858.

Full text

Abstract:

The magnetic and electric fields of electrostatic discharges are assessed using the Naïve Bayes algorithm, a machine learning technique. Laboratory data from electrostatic discharge generators were used for the implementation of this algorithm. The applied machine learning algorithm can be used to predict the radiated field knowing the discharge current. The results of the Naïve Bayes algorithm are compared to a previous software tool derived by Artificial Neural Networks, proving its better outcome. The Naïve Bayes algorithm has excellent performance on most classification tasks, despite its simplicity, and usually is more accurate than many sophisticated methods. The proposed algorithm can be used by laboratories that conduct electrostatic discharge tests on electronic equipment. It will be a useful software tool, since they will be able to predict the radiating electromagnetic field by simply measuring the discharge current from the electrostatic discharge generators.

APA, Harvard, Vancouver, ISO, and other styles

5

I., Ciocioi. "Testing of immunity to electrostatic discharge of electronic devices and devices electrically initiated." Scientific Bulletin of Naval Academy XXII, no. 2 (2019): 337–42. http://dx.doi.org/10.21279/1454-864x-19-i2-040.

Full text

Abstract:

Electrostatic discharges of bodies loaded with static electricity are accompanied by the emergence of tension and transient currents, which can cause damage to electronic devices and the ignition of electrically initiated devices. In electromagnetic compatibility a great importance (from the point of view of electrostatic discharge) has the discharge of human body.

APA, Harvard, Vancouver, ISO, and other styles

6

Białek, Kamil, Patryk Wetoszka, and Jacek Paś. "Methodology of testing positive attitudes to electrostatic discharges — measuring position." Bulletin of the Military University of Technology 68, no. 4 (2020): 85–93. http://dx.doi.org/10.5604/01.3001.0013.9732.

Full text

Abstract:

One of the most common causes of damage to electronic devices is electrostatic discharge — ESD for short. They arise during the normal use of the equipment by the operator who in adverse conditions (dry air and electrifying materials) can charge electrostatically to very high voltages and, for example, touching the ticket machine keyboard in the train compartment and causing an electrostatic discharge. There are many mechanisms for the formation of electrostatic charges, among others: during friction, grinding or rapid separation of solid, liquid or gaseous bodies. Another electrifying method is the phenomenon of electrostatic induction during which in the electrostatic field a polarization of the body occurs in the neutral state in a way of separating positive and negative charges. Keywords: electrostatic discharges, electronic systems, phenomenon of electrostatic induction

APA, Harvard, Vancouver, ISO, and other styles

7

Gabor, Dan, Florin Adrian Păun, and Anca Tăzlăuanu. "The danger of initiating explosives by electrostatic discharge. Checking the level of sensitivity of explosives to electrostatic discharges." MATEC Web of Conferences 373 (2022): 00004. http://dx.doi.org/10.1051/matecconf/202237300004.

Full text

Abstract:

Explosives designed for civil uses can be, in some cases, be triggered by accident due to electrostatic discharge. Static electricity, as a source of electrostatic discharge, is a common phenomenon in the explosives manufacturing industry. Explosives designed for civil uses are substances, materials and accessories that present a high-risk factor during their production, packaging, storage, transport, use and disposal. In order to establish essential safety requirements for civilian uses explosives, national legislation has been harmonized with European legislation, respectively with Directive 2014/28/EU of the European Parliament and of the Council regarding the placing on the market and control of explosives for civil use, for handling with minimal risk to the safety of human life and health, to prevent damage to property and the environment, and to ensure the safety and health of persons coming into contact with civil uses explosives. In this context, it is necessary to apply high-performance test methods to determine the safety parameters for assessing the conformity of explosives for civil use with the safety requirements set out in the specified directive. This paper describes some aspects regarding the implementation of the testing method for checking the level of sensitivity to electrostatic energy of explosives within the Laboratory of Non-Electrical Ex Equipment, Electrostatics, Materials and PPE within INCD INSEMEX Petroșani [1, 2].

APA, Harvard, Vancouver, ISO, and other styles

8

Schroeder, Steven. "Specifying Electrostatic Discharge Floor." CoatingsPro 16, no. 6 (2016): 18–19. https://doi.org/10.5006/cp2016_16_6-18.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Wang, Huimin, Xiaofeng Hu, and Xining Xie. "Research progress on electrostatic discharge law of aircraft and radiation signal detection technology." Frontiers in Computing and Intelligent Systems 1, no. 2 (2022): 11–17. http://dx.doi.org/10.54097/fcis.v1i2.1626.

Full text

Abstract:

At present, the number of combat aircraft in China is huge and in a stage of rapid development, and the electrostatic discharge effect of aircraft during flight has become one of the important issues related to the reliability and safety of aircraft; At the same time, the use of electrostatic discharge radiation signals to achieve aircraft detection and positioning is also an urgent need to develop an effective means of dealing with stealth technology, with significant advantages and broad prospects for military applications. In this paper, from the aspects of the harm of electrostatic discharge to aircraft, the characteristics and radiation laws of electrostatic discharge of aircraft, and the detection technology of electrostatic signal of aircraft, this paper expounds the research progress at home and abroad, analyzes the new problems faced by the electrostatic discharge effect of aircraft and static detection technology, and looks forward to the next research and development direction. The analysis results show that the research hotspots of aircraft electrostatic discharge effect and static detection technology focus on the new mechanism of electrostatic discharge and new radiation signal detection technology brought about by new materials, new environments, new loads and new requirements, and the work that needs to be focused on urgent research mainly includes the study of the integrated characteristics of multi-source electrostatic discharge of aircraft, the long-distance detection of electrostatic discharge information, and the evaluation method of the effect of electrostatic discharge on the airborne electronic system, etc., which provide technical support for improving the reliability and safety of aircraft during flight.

APA, Harvard, Vancouver, ISO, and other styles

10

Zhang, Yu, Yafei Yuan, Xiaoqing Li, et al. "Electrostatic Discharge Characteristics of Cable Discharge Event." Journal of Electrical Engineering & Technology 14, no. 1 (2019): 385–93. http://dx.doi.org/10.1007/s42835-018-00044-2.

Full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Dissertations / Theses on the topic "Electrostatic discharge"

1

Dissanayake, Amal S. "Electrostatic discharge damage detection method." Thesis, Kansas State University, 1997. http://hdl.handle.net/2097/13512.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Morosko, Jason M. "Composite Discharge Electrode for Electrostatic Precipitator." Ohio University / OhioLINK, 2007. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1173374043.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Svenningsson, Stefan. "Guideline for testing electrostatic discharge on whole vehicle." Thesis, KTH, Tillämpad maskinteknik (KTH Södertälje), 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-35370.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Al-Majali, Yahya T. "Novel Hybrid Composite Discharge Electrode for Electrostatic Precipitator." Ohio University / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1492188040079733.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Gunenc, Mehmet V. "Enhanced Charging Sieving Electrostatic Precipitator." Ohio University / OhioLINK, 2007. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1195594122.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Reiner, Joachim Christian. "Latent gate oxide damage induced by ultra-fast electrostatic discharge /." [S.l.] : [s.n.], 1995. http://e-collection.ethbib.ethz.ch/show?type=diss&nr=11212.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Hwang, Yu-Chul. "Electrostatic discharge and electrical overstress failures of non-silicon devices." College Park, Md. : University of Maryland, 2005. http://hdl.handle.net/1903/2198.

Full text

Abstract:

Thesis (Ph. D.) -- University of Maryland, College Park, 2005.<br>Thesis research directed by: Mechanical Engineering. Title from t.p. of PDF. Includes bibliographical references. Published by UMI Dissertation Services, Ann Arbor, Mich. Also available in paper.

APA, Harvard, Vancouver, ISO, and other styles

8

Oglesbee, Robert A. "SPATIAL LOCATION OF ELECTROSTATIC DISCHARGE EVENTS WITHIN INFORMATION TECHNOLOGY EQUIPMENT." UKnowledge, 2007. http://uknowledge.uky.edu/gradschool_theses/490.

Full text

Abstract:

In this thesis, a system to locate an electrostatic discharge (ESD) event within an electronic device has been developed. ESD can cause a device to fail legally required radiated emissions limits as well as disrupt intended operation. The system used a fast oscilloscope with four channels, each channel attached to a high frequency near-field antenna. These antennas were placed at known locations in three dimensional space to measure the fields radiated from the ESD event. A Time-Difference-of-Arrival technique was used to calculate the location of the ESD event. Quick determination of the ESD event location provides developers with a tool that saves them time and money by eliminating the time-consuming and tedious method of general ESD mitigation within a product.

APA, Harvard, Vancouver, ISO, and other styles

9

Tunnicliffe, Martin James. "Electrical overstress and electrostatic discharge failure in silicon MOS devices." Thesis, Loughborough University, 1993. https://dspace.lboro.ac.uk/2134/7304.

Full text

Abstract:

This thesis presents an experimental and theoretical investigation of electrical failure in MOS structures, with a particular emphasis on short-pulse and ESD failure. It begins with an extensive survey of MOS technology, its failure mechanisms and protection schemes. A program of experimental research on MOS breakdown is then reported, the results of which are used to develop a model of breakdown across a wide spectrum of time scales. This model, in which bulk-oxide electron trapping/emission plays a major role, prohibits the direct use of causal theory over short time-scales, invalidating earlier theories on the subject. The work is extended to ESD stress of both polarities. Negative polarity ESD breakdownis found to be primarily oxide-voltage activated, with no significant dependence on temperature of luminosity. Positive polarity breakdown depends on the rate of surface inversion, dictated by the Si avalanche threshold and/or the generation speed of light-induced carriers. An analytical model, based upon the above theory is developed to predict ESD breakdown over a wide range of conditions. The thesis ends with an experimental and theoretical investigation of the effects of ESD breakdown on device and circuit performance. Breakdown sites are modelled as resistive paths in the oxide, and their distorting effects upon transistor performance are studied. The degradation of a damaged transistor under working stress is observed, giving a deeper insight into the latent hazards of ESD damage.

APA, Harvard, Vancouver, ISO, and other styles

10

Su, Yi-chuan. "Theoretical and experimental characterisation of energy in an electrostatic discharge." Thesis, Queensland University of Technology, 2013. https://eprints.qut.edu.au/63476/1/Yi-chuan_Su_Thesis.pdf.

Full text

Abstract:

Electrostatic discharges have been identified as the most likely cause in a number of incidents of fire and explosion with unexplained ignitions. The lack of data and suitable models for this ignition mechanism creates a void in the analysis to quantify the importance of static electricity as a credible ignition mechanism. Quantifiable hazard analysis of the risk of ignition by static discharge cannot, therefore, be entirely carried out with our current understanding of this phenomenon. The study of electrostatics has been ongoing for a long time. However, it was not until the wide spread use of electronics that research was developed for the protection of electronics from electrostatic discharges. Current experimental models for electrostatic discharge developed for intrinsic safety with electronics are inadequate for ignition analysis and typically are not supported by theoretical analysis. A preliminary simulation and experiment with low voltage was designed to investigate the characteristics of energy dissipation and provided a basis for a high voltage investigation. It was seen that for a low voltage the discharge energy represents about 10% of the initial capacitive energy available and that the energy dissipation was within 10 ns of the initial discharge. The potential difference is greatest at the initial break down when the largest amount of the energy is dissipated. The discharge pathway is then established and minimal energy is dissipated as energy dissipation becomes greatly influenced by other components and stray resistance in the discharge circuit. From the initial low voltage simulation work, the importance of the energy dissipation and the characteristic of the discharge were determined. After the preliminary low voltage work was completed, a high voltage discharge experiment was designed and fabricated. Voltage and current measurement were recorded on the discharge circuit allowing the discharge characteristic to be recorded and energy dissipation in the discharge circuit calculated. Discharge energy calculations show consistency with the low voltage work relating to discharge energy with about 30-40% of the total initial capacitive energy being discharged in the resulting high voltage arc. After the system was characterised and operation validated, high voltage ignition energy measurements were conducted on a solution of n-Pentane evaporating in a 250 cm3 chamber. A series of ignition experiments were conducted to determine the minimum ignition energy of n-Pentane. The data from the ignition work was analysed with standard statistical regression methods for tests that return binary (yes/no) data and found to be in agreement with recent publications. The research demonstrates that energy dissipation is heavily dependent on the circuit configuration and most especially by the discharge circuit's capacitance and resistance. The analysis established a discharge profile for the discharges studied and validates the application of this methodology for further research into different materials and atmospheres; by systematically looking at discharge profiles of test materials with various parameters (e.g., capacitance, inductance, and resistance). Systematic experiments looking at the discharge characteristics of the spark will also help understand the way energy is dissipated in an electrostatic discharge enabling a better understanding of the ignition characteristics of materials in terms of energy and the dissipation of that energy in an electrostatic discharge.

APA, Harvard, Vancouver, ISO, and other styles

More sources

Books on the topic "Electrostatic discharge"

1

McAteer, Owen J. Electrostatic discharge control. McGraw-Hill Pub., 1990.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

2

McAteer, Owen J. Electrostatic discharge control. Westinghouse, 1989.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

3

Crowell, William H. Electrostatic discharge susceptibility data. Reliability Analysis Center, 1990.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

4

H, Crowell William, and Reliability Analysis Center (U.S.), eds. Electrostatic discharge susceptibility data. The Center, 1991.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

5

Rayal, Fathallah. Travelling-wave electrostatic discharge simulation. National Library of Canada = Bibliothèque nationale du Canada, 1993.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

6

Sclater, Neil. Electrostatic discharge protection for electronics. Tab Professional and Reference Books, 1990.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

7

MacLeod, Leesa Marie. Compact travelling-wave electrostatic discharge simulator. National Library of Canada, 1993.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

8

Mardiguian, Michel. Electrostatic discharge: Understand, simulate, and fix ESD problems. Interference Control Technologies, 1985.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

9

Mardiguian, Michel. Electrostatic discharge: Understand, simulate, and fix ESD problems. 3rd ed. Wiley, 2009.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

10

Fuqua, Norman B. Electrostatic discharge control manufacturing guidelines: Meeting ISO 9000 requirements. Reliability Analysis Center, 1998.

Find full text

APA, Harvard, Vancouver, ISO, and other styles

More sources

Book chapters on the topic "Electrostatic discharge"

1

Russ, Samuel H. "Electrostatic Discharge." In Signal Integrity. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-29758-3_12.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Weik, Martin H. "electrostatic discharge." In Computer Science and Communications Dictionary. Springer US, 2000. http://dx.doi.org/10.1007/1-4020-0613-6_6033.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Russ, Samuel H. "Electrostatic Discharge." In Signal Integrity. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-86927-4_13.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Matsui, Nobumitsu, Yoshiyasu Ehara, Toshiaki Yamamoto, Akinori Zukeran, and Koji Yasumoto. "Study of Carbon Monoxide Oxidation by Discharge." In Electrostatic Precipitation. Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-540-89251-9_140.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Oishi, Yujiro, Yoshiyasu Ehara, and Toshiaki Yamamoto. "VOC Removal Using Adsorption and Surface Discharge." In Electrostatic Precipitation. Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-540-89251-9_144.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Jindapetch, Nattha, Kittikhun Thongpull, Sayan Plong-Ngooluam, and Pornchai Rakpongsiri. "Electrostatic Discharge Inspection Technologies." In Visual Inspection Technology in the Hard Disk Drive Industry. John Wiley & Sons, Inc., 2015. http://dx.doi.org/10.1002/9781119058755.ch8.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Ehara, Yoshiyasu, Daiki Yagishita, Toshiaki Yamamoto, Akinori Zukeran, and Koji Yasumoto. "Relationship between Discharge Electrode Geometry and Ozone Concentration in Electrostatic Precipitator." In Electrostatic Precipitation. Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-540-89251-9_139.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Shuiliang, Yao, Atoshi Kodama, Shin Yamamoto, Chieko Mine, Yuichi Fujioka, and Chihiro Fushimi. "Application of a Dielectric Barrier Discharge Reactor for Diesel PM Removal." In Electrostatic Precipitation. Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-540-89251-9_141.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Ahuja, Anil. "Lightning, Electrostatic Discharge, and Buildings." In Integration of Nature and Technology for Smart Cities. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-25715-0_6.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Ahuja, Anil. "Lightning, Electrostatic Discharge, and Buildings." In Integrated M/E Design. Springer US, 1997. http://dx.doi.org/10.1007/978-1-4757-5514-5_12.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "Electrostatic discharge"

1

Staggs, David M. "Designing for Electrostatic Discharge Immunity." In 8th International Zurich Symposium and Technical Exhibition on Electromagnetic Compatibility. IEEE, 1989. https://doi.org/10.23919/emc.1989.10779136.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Bush, Donald R. "Statistical Considerations of Electrostatic Discharge Evaluations." In 7th International Zurich Symposium and Technical Exhibition on Electromagnetic Compatibility. IEEE, 1987. https://doi.org/10.23919/emc.1987.10778973.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Rudko, Michael, Yu Chang, and Chang-Yu Wu. "System Modeling of Electrostatic Discharge Waveforms." In EMC_1990_Wroclaw. IEEE, 1990. https://doi.org/10.23919/emc.1990.10832991.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

Murasaki, Norio. "Electrostatic Discharge by the Travelling Field." In EMC_1988_Wroclaw. IEEE, 1988. https://doi.org/10.23919/emc.1988.10832842.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Ward, D. D. "Electrostatic discharge." In IEE Colloquium on "Hows" and "Whys" of EMC Design. IEE, 1999. http://dx.doi.org/10.1049/ic:19990004.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Plowman, R. J. "Electrostatic discharge: a review." In IEE Colloquium on ESD (Electrostatic Discharge) and ESD Counter Measures. IEE, 1995. http://dx.doi.org/10.1049/ic:19950410.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

"Electrical overstress / electrostatic discharge symposium proceedings." In Proceedings Electrical Overstress/Electrostatic Discharge Symposium. IEEE, 1996. http://dx.doi.org/10.1109/eosesd.1996.865111.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

Swiecicki, M. "Electrostatic Concerns In The Graphic Arts Industry." In Proceedings Electrical Overstress/Electrostatic Discharge Symposium. IEEE, 1997. http://dx.doi.org/10.1109/eosesd.1997.634255.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Chang, C. "Three-dimensional Transient Simulation Of Niagnetoresistive Head Temperature During An Esd Event." In Proceedings Electrical Overstress/Electrostatic Discharge Symposium. IEEE, 1997. http://dx.doi.org/10.1109/eosesd.1997.634269.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Bock, K. "Esd Issues In Compound Semiconductor High Frequency Devices And Circuits." In Proceedings Electrical Overstress/Electrostatic Discharge Symposium. IEEE, 1997. http://dx.doi.org/10.1109/eosesd.1997.634220.

Full text

APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "Electrostatic discharge"

1

Dickson, Peter, and Philip John Rae. Low-voltage detonator response to electrostatic discharge. Office of Scientific and Technical Information (OSTI), 2018. http://dx.doi.org/10.2172/1489924.

Full text

APA, Harvard, Vancouver, ISO, and other styles

2

Berry, R. B. Electrostatic Discharge testing of propellants and primers. Office of Scientific and Technical Information (OSTI), 1994. http://dx.doi.org/10.2172/10131328.

Full text

APA, Harvard, Vancouver, ISO, and other styles

3

Pocher, Liam, John Rose, Travis Peery, and Jonathan Mace. Physics Guided Simulation of Electrostatic Discharge: Technical Report. Office of Scientific and Technical Information (OSTI), 2022. http://dx.doi.org/10.2172/1845236.

Full text

APA, Harvard, Vancouver, ISO, and other styles

4

KING, TONY L., and WILLIAM W. TARBELL. Pin-to-Pin Electrostatic Discharge Protection for Semiconductor Bridges. Office of Scientific and Technical Information (OSTI), 2002. http://dx.doi.org/10.2172/801389.

Full text

APA, Harvard, Vancouver, ISO, and other styles

5

Wang, P. S., and G. F. Hall. Friction, impact, and electrostatic discharge sensitivities of energetic materials. Office of Scientific and Technical Information (OSTI), 1985. http://dx.doi.org/10.2172/5667780.

Full text

APA, Harvard, Vancouver, ISO, and other styles

6

Collins, Eric S., Jennifer L. Gottfried, and Eric C. Johnson. New Method for Quantifying Ignition Sensitivity from Electrostatic Discharge. Defense Technical Information Center, 2015. http://dx.doi.org/10.21236/ada621963.

Full text

APA, Harvard, Vancouver, ISO, and other styles

7

Wilson, M. J. Projected Response of Typical Detonators to Electrostatic Discharge (ESD) Environments. Office of Scientific and Technical Information (OSTI), 2002. http://dx.doi.org/10.2172/15003275.

Full text

APA, Harvard, Vancouver, ISO, and other styles

8

SALAS, FREDERICK J., DANIEL H. SANCHEZ, and JOHN HARVEY WEINLEIN. Electrostatic Discharge (ESD) Protection for a Laser Diode Ignited Actuator. Office of Scientific and Technical Information (OSTI), 2003. http://dx.doi.org/10.2172/820898.

Full text

APA, Harvard, Vancouver, ISO, and other styles

9

Malchi, Jonathan Y., and Timothy J. Foley. Development of nano-thermite composites with variable electrostatic discharge ignition thresholds. Office of Scientific and Technical Information (OSTI), 2007. http://dx.doi.org/10.2172/1454970.

Full text

APA, Harvard, Vancouver, ISO, and other styles

10

Tockey, R. J. Department 8450 electrical overstress, EOS, and electrostatic discharge, ESD, damage control handbook. Office of Scientific and Technical Information (OSTI), 1989. http://dx.doi.org/10.2172/6286900.

Full text

APA, Harvard, Vancouver, ISO, and other styles

We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!