Relevant bibliographies by topics / End surface

Contents

  1. Journal articles
  2. Dissertations / Theses
  3. Books
  4. Book chapters
  5. Conference papers
  6. Reports

Academic literature on the topic 'End surface'

Author: Grafiati
Published: 28 May 2022
Last updated: 31 July 2025

Create a spot-on reference in APA, MLA, Chicago, Harvard, and other styles

Select a source type:

Consult the lists of relevant articles, books, theses, conference reports, and other scholarly sources on the topic 'End surface.'

Next to every source in the list of references, there is an 'Add to bibliography' button. Press on it, and we will generate automatically the bibliographic reference to the chosen work in the citation style you need: APA, MLA, Harvard, Chicago, Vancouver, etc.

You can also download the full text of the academic publication as pdf and read online its abstract whenever available in the metadata.

Journal articles on the topic "End surface"

1

Hosokawa, Akira, Naoya Hirose, Takashi Ueda, Tomohiro Koyano, and Tatsuaki Furumoto. "High-Quality End Milling of CFRP – Inclination Milling with High-Helix End Mill –." International Journal of Automation Technology 10, no. 3 (2016): 372–80. http://dx.doi.org/10.20965/ijat.2016.p0372.

Full text
Abstract:
Side milling tests of CFRP (carbon fiber reinforced plastics) containing thermosetting resin are carried out by TiAlN/AlCrN-coated, H2-free DLC (diamond-like carbon)-coated, and CVD diamond-coated carbide end mills without coolant. Two types of end mills having different helix angles of 30° and 60° are used. The film thickness and surface smoothness are varied for the DLC-coated end mills. The cutting characteristics are evaluated by tool wear and surface integrity (i.e., 3D profiles of the machined surface, generation of fluffing, delamination, and pull-out of the carbon fibers). The cutting
APA, Harvard, Vancouver, ISO, and other styles
2

Kogusu, Shinichi, Takakazu Ishimatsu, and Yasuhiko Ougiya. "Rapid Generation of Surface Dimples Using End Milling." International Journal of Automation Technology 1, no. 1 (2007): 45–51. http://dx.doi.org/10.20965/ijat.2007.p0045.

Full text
Abstract:
Structured surfaces on metal are often employed to enhance lubricating features, reduce the hydrodynamic drag force along wings and also decorate the metal surfaces for architectural ornament. It is important to note that only horizontal movements of a ball-end mill at high feed speed generate the indented surface on metal surfaces. In this paper we propose a technique to estimate the dimples generated on the metal surfaces using a machining center with an oval-end mill. Firstly, a technique to simulate the generating process of the dimples with the machining center is explained. The technique
APA, Harvard, Vancouver, ISO, and other styles
3

Nakao, Takeshi. "End surface reflection type surface acoustic wave device." Journal of the Acoustical Society of America 121, no. 4 (2007): 1833. http://dx.doi.org/10.1121/1.2723993.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Narita, Hirohisa, Keiichi Shirase, Eiji Arai, and Hideo Fujimoto. "Trial Surface-Property Prediction in End-Mill Operation." International Journal of Automation Technology 4, no. 3 (2010): 229–34. http://dx.doi.org/10.20965/ijat.2010.p0229.

Full text
Abstract:
Because surface precision is an important factor in machined surfaces, we propose a model for predicting surface properties in end-mill operation. Prediction considers cutting edges including a cutting tool movement and rotation and cutter runout and vibration. Experiments confirmed the model’s feasibility.
APA, Harvard, Vancouver, ISO, and other styles
5

Perko, Roland, Hannes Raggam, and Peter M. Roth. "Mapping with Pléiades—End-to-End Workflow." Remote Sensing 11, no. 17 (2019): 2052. http://dx.doi.org/10.3390/rs11172052.

Full text
Abstract:
In this work, we introduce an end-to-end workflow for very high-resolution satellite-based mapping, building the basis for important 3D mapping products: (1) digital surface model, (2) digital terrain model, (3) normalized digital surface model and (4) ortho-rectified image mosaic. In particular, we describe all underlying principles for satellite-based 3D mapping and propose methods that extract these products from multi-view stereo satellite imagery. Our workflow is demonstrated for the Pléiades satellite constellation, however, the applied building blocks are more general and thus also appl
APA, Harvard, Vancouver, ISO, and other styles
6

Biondani, Francesco, Giuliano Bissacco, and Hans Nørgaard Hansen. "Surface topography analysis of ball end milled tool steel surfaces." Procedia CIRP 87 (2020): 153–58. http://dx.doi.org/10.1016/j.procir.2020.03.002.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Mason, Ralf, Claire A. Jalbert, Patricia A. V. O'Rourke Muisener, et al. "Surface energy and surface composition of end-fluorinated polystyrene." Advances in Colloid and Interface Science 94, no. 1-3 (2001): 1–19. http://dx.doi.org/10.1016/s0001-8686(01)00051-3.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Yang, Jian, Michael Soltz, Heinrich Russell, et al. "Surface Deformation Analysis of End-to-End Stapled Intestinal Anastomosis." Surgical Innovation 19, no. 3 (2011): 281–87. http://dx.doi.org/10.1177/1553350611426566.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Liow, Jong Leng, and Ulrich Frye. "Surfaces Machined by Micro End-Mills at Constant Chip Load." Key Engineering Materials 443 (June 2010): 232–37. http://dx.doi.org/10.4028/www.scientific.net/kem.443.232.

Full text
Abstract:
The surfaces of Al6061, machined by 150 μm two flute micro end-mills, were studied to determine their roughness. The surface roughness, Ra, was less than 100 nm but the Ra/Rz ratio ranged from 0.03–0.12. The surface roughness was found to improve with increasing width of cut and to a lesser extent with increasing feed rate. A single pass of the end-mill was found to produce a smoother surface than two passes over the same surface. The surface roughness was found to correspond to the diameter of the end mill and the slope of the secondary cutting edge. To reduce the surface roughness, smaller d
APA, Harvard, Vancouver, ISO, and other styles
10

Qin, Yu Xia, Ji Hong Jia, Zhi Wei, Mei Lin Gu, Tong Hui Li, and Yu Tao Wang. "Ball End Milling of Glass with Inclined Cutter." Applied Mechanics and Materials 33 (October 2010): 195–99. http://dx.doi.org/10.4028/www.scientific.net/amm.33.195.

Full text
Abstract:
This study deals with the effect of tool–surface inclination on cutting forces in ball end milling .Since glass undergoes almost no elastic deformation, the shape of the cutter in glass machining has a larger influence on surface finish than that of metal machining. Model of geometry and tilt tool milling process is established. A double helix micro-flute ball end mill made of cemented carbide is used in the groove milling tests with radius 0.5mm at a helix angle of 30°. The rotational axis of the tool is inclined to improve the surface finish. The cutting processes are modeled, and 3-directio
APA, Harvard, Vancouver, ISO, and other styles
More sources

Dissertations / Theses on the topic "End surface"

1

Miao, X. "Turbine end-wall aerothermal management with engineered surface structure." Thesis, City, University of London, 2018. http://openaccess.city.ac.uk/20405/.

Full text
Abstract:
Motivated by the enlarged design space and additional flexibility offered by the latest advances in manufacturing techniques, especially Additive Manufacturing (AM), this thesis investigates a novel turbine end-wall aerothermal management method with the engineered surface structures, through closely coupled experi-mental and numerical studies. A 90-degree turning duct and a linear turbine cascade test section were employed for the experimental research in a low-speed wind tunnel. Duct and turbine end-wall heat transfer and cooling effectiveness were measured by transient Infrared Thermography
APA, Harvard, Vancouver, ISO, and other styles
2

Gillen, Daniel J. "Surface combatant planning since the end of the Cold War." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 1998. http://handle.dtic.mil/100.2/ADA358799.

Full text
Abstract:
Thesis (M.S. in Management) Naval Postgraduate School, December 1998.<br>"December 1998." Thesis advisor(s): Richard B. Doyle, John E. Mutty. Includes bibliographical references (p. 153-161). Also available online.
APA, Harvard, Vancouver, ISO, and other styles
3

Zhang, Zimo. "Effect Of Chain End Functional And Chain Architecture On Surface Segregation." University of Akron / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=akron1498513871263316.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Zhang, Fan Mr. "BRANCHING AND CHAIN END EFFECTS ON SURFACE FLUCTUATIONS OF POLYSTYRENE MELT FILMS." University of Akron / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=akron1542541224707819.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Choi, Young Gu. "An integrated computer simulation system to evaluate surface integrity in end milling /." free to MU campus, to others for purchase, 1996. http://wwwlib.umi.com/cr/mo/fullcit?p9717175.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Ahmed, Hamza Hafez Ahmed Anwar. "End-wall flow of a surface-mounted obstacle on a convex hump." Auburn, Ala., 2009. http://hdl.handle.net/10415/1946.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Melais, Sergio E. "A quasi Yagi antenna with end fire radiation over a metal ground." [Tampa, Fla] : University of South Florida, 2009. http://purl.fcla.edu/usf/dc/et/SFE0003246.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Kulkarni, Nitin Madhukar 1957. "Modelling of end milling operation to predict the achievable surface finish and tolerance." Thesis, The University of Arizona, 1993. http://hdl.handle.net/10150/278323.

Full text
Abstract:
With increasing necessity to integrate CAD and CAM, it is necessary to develop more accurate models for predicting the performance of manufacturing processes. Conventionally, process parameters are selected by the process planner based on his experience. For CAD-CAM integration to be meaningful, it should be possible to arrive at the same decisions using computer models for that process. The end milling process is selected for such modeling. The parameters considered are process variables, cutter geometry, cutter material properties, workpiece material properties, workpiece geometry and locati
APA, Harvard, Vancouver, ISO, and other styles
9

Fisher, Caitlin. "Surface plasmon polariton excitation by end-fire coupling in a variety of plasmonic materials." Thesis, The University of Sydney, 2016. http://hdl.handle.net/2123/16045.

Full text
Abstract:
Surface plasmon polaritons are highly localised field oscillations that propagate along interfaces between a dielectric and a metal. Their localised fields make them potential signal carriers between integrated circuits, replacing electronic signals, to allow wider bandwidths and less power dissipation. End-fire coupling is a simple, compact method for exciting surface plasmon polaritons with potential for high coupling efficiency. However, the parameters that determine the mechanism's optimisation are not well understood. We present a semi-analytical model of the end-fire mechanism, in which
APA, Harvard, Vancouver, ISO, and other styles
10

Shauche, Vishwesh. "Health Assessment based In-process Surface Roughness Prediction System." University of Cincinnati / OhioLINK, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1298323430.

Full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Books on the topic "End surface"

1

Gabellanes, I. Computer aided simulation of surface finish geometry resulting from end milling. UMIST, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
2

Boyd, Robert C. Annual technical report, year 1, for the Sample Acquisition & Instrument Deployment (SAID). National Aeronautics and Space Administration, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
3

Mark, Benson, and United States. National Aeronautics and Space Administration., eds. Rod gripper, changer, and storage system: ME 4182 final report. George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
4

C, Brock John, and United States. National Aeronautics and Space Administration., eds. OCTS and SeaWiFS bio-optical algorithm and product validation and intercomparison in US coastal waters: Year end draft technical memorandum for period of performance July 21, 1997-July 20, 1998. National Aeronautics and Space Administration, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
5

C, Brock John, and United States. National Aeronautics and Space Administration., eds. OCTS and SeaWiFS bio-optical algorithm and product validation and intercomparison in US coastal waters: Year end draft technical memorandum for period of performance July 21, 1997-July 20, 1998. National Aeronautics and Space Administration, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
6

C, Brock John, and United States. National Aeronautics and Space Administration., eds. OCTS and SeaWiFS bio-optical algorithm and product validation and intercomparison in US coastal waters: Year end draft technical memorandum for period of performance July 21, 1997-July 20, 1998. National Aeronautics and Space Administration, 1998.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
7

Subari, Khairanum. Three dimensional (3D) characterisation of electrodischarge machining (EDM) and end milling surfaces. University of Birmingham, 1994.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
8

Guyot, Gérard. Signatures spectrales des surfaces naturelles. Paradigme, 1989.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
9

1945-, Mittal K. L., and International Symposium on Polymer Surface Modification: Relevance to Adhesion (2nd : 1999 : Las Vegas, Nevada), eds. Polymer surface modification: Relevance to adhesion. VSP, 1996.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
10

A, Quattrochi Dale, and Luvall Jeffrey C, eds. Thermal remote sensing in land surface processes. CRC Press, 2004.

Find full text
APA, Harvard, Vancouver, ISO, and other styles
More sources

Book chapters on the topic "End surface"

1

Liu, Jiarui, Yuanpei Zhang, Zhuojun Zou, and Jie Hao. "End-to-End Surface Reconstruction for Touching Trajectories." In Computer Vision – ACCV 2022. Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-26293-7_7.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Rapp, Christoph. "Steady free surface flow." In Hydraulics in Civil Engineering. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-54860-4_13.

Full text
Abstract:
AbstractSteady free surface flow is Chapter 13’s topic which starts with the consideration of sub- and supercritical flow. From the Bernoulli equation for free surfaces, we make our way to the consideration of flows under sluice gates or over weirs, through syphon weirs or Venturi channels. Subsequently steady-state, uniform conditions and the describing equations are elaborated before nonuniform conditions are discussed. The chapter ends with the direct step method, for which, again, open-source codes are provided. At the end of the chapter the reader can solve problems of nonuniform free sur
APA, Harvard, Vancouver, ISO, and other styles
3

Liberale, Carlo, Gheorghe Cojoc, Vijayakumar Rajamanickam, et al. "Miniaturized Optical Tweezers Through Fiber-End Microfabrication." In Springer Series in Surface Sciences. Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-06998-2_8.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Lv, Jin-tao, Xi-ning Huang, JunJiang Zhu, and Zhao-jie Zhang. "An End-to-End Deep Learning Model to Predict Surface Roughness." In Intelligent Equipment, Robots, and Vehicles. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-7213-2_58.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Petrakov, Yuri, Yuri Danylchenko, Serhii Sapon, and Maksim Sikailo. "Surface Relief Formation in Peripheral End Milling." In Lecture Notes in Mechanical Engineering. Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-32767-4_30.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Ouala, Said, Pierre Tandeo, Bertrand Chapron, Fabrice Collard, and Ronan Fablet. "End-to-End Kalman Filter in a High Dimensional Linear Embedding of the Observations." In Mathematics of Planet Earth. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-18988-3_13.

Full text
Abstract:
AbstractData assimilation techniques are the state-of-the-art approaches in the reconstruction of a spatio-temporal geophysical state such as the atmosphere or the ocean. These methods rely on a numerical model that fills the spatial and temporal gaps in the observational network. Unfortunately, limitations regarding the uncertainty of the state estimate may arise when considering the restriction of the data assimilation problems to a small subset of observations, as encountered for instance in ocean surface reconstruction. These limitations motivated the exploration of reconstruction techniqu
APA, Harvard, Vancouver, ISO, and other styles
7

White, Kathleen A., Robert S. Ward, Rusty S. Gill, Florencia Lim, and Sallie K. Coviello. "Surface Modification of Segmented Polyurethaneureas via Oligomeric End Groups Incorporated During Synthesis." In Surface Modification of Polymeric Biomaterials. Springer US, 1996. http://dx.doi.org/10.1007/978-1-4899-1953-3_4.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Meeks, William, and Joaquín Pérez. "Minimal surfaces with finite topology and more than one end." In A Survey on Classical Minimal Surface Theory. American Mathematical Society, 2012. http://dx.doi.org/10.1090/ulect/060/03.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Kljajo, Matej, and Danijel Šogorović. "Research of the Surface Roughness Parameters After End Milling." In New Technologies, Development and Application IV. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-75275-0_27.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Morishige, Koichi, Teruhisa Nasu, and Yoshimi Takeuchi. "Five —Axis Control Sculptured Surface Machining Using Conicoid End Mill." In Machining Impossible Shapes. Springer US, 1999. http://dx.doi.org/10.1007/978-0-387-35392-0_38.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Conference papers on the topic "End surface"

1

Li, Beibei, Xiyue Zhang, Minnan Han, Haoxuan Luan, and Shujie Sun. "End-to-End Surface Roughness Prediction Method Driven by Multi-Source Information Fusion." In 2024 10th International Conference on Computer and Communications (ICCC). IEEE, 2024. https://doi.org/10.1109/iccc62609.2024.10941778.

Full text
APA, Harvard, Vancouver, ISO, and other styles
2

Wang, Xiaoya, Kexin Chen, and Zengdi Bao. "Surface Wave-Based Conformal End-Fire Antenna With Mitigated Beam Tilt." In 2024 IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes for RF and THz Applications (IMWS-AMP). IEEE, 2024. https://doi.org/10.1109/imws-amp62793.2024.10966806.

Full text
APA, Harvard, Vancouver, ISO, and other styles
3

Song, Jiayi, Jianing Zhao, Jianyi Zhou, Zhenjia Gao, and Zhiqiang Yu. "A 2-bit Reconfigurable Intelligent Surface Based on Open-end Transmission Lines." In 2024 IEEE 12th Asia-Pacific Conference on Antennas and Propagation (APCAP). IEEE, 2024. https://doi.org/10.1109/apcap62011.2024.10881372.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Zheng, Qiming, Xiang Jin Zeng, Junyu Cai, and Hetao Ma. "Research on Lightweight Steel Rebar End Surface Detection Algorithm Based on Improved YOLOv8." In 2024 3rd International Conference on Artificial Intelligence and Computer Information Technology (AICIT). IEEE, 2024. http://dx.doi.org/10.1109/aicit62434.2024.10730247.

Full text
APA, Harvard, Vancouver, ISO, and other styles
5

Mueller, D., H. F. Dylla, M. G. Bell, et al. "End points in discharge cleaning on TFTR." In Surface Conditioning of vacuum systems. AIP, 1990. http://dx.doi.org/10.1063/1.39064.

Full text
APA, Harvard, Vancouver, ISO, and other styles
6

Jin, Shengze, Daniel Barath, Marc Pollefeys, and Iro Armeni. "Q-REG: End-to-End Trainable Point Cloud Registration with Surface Curvature." In 2024 International Conference on 3D Vision (3DV). IEEE, 2024. http://dx.doi.org/10.1109/3dv62453.2024.00120.

Full text
APA, Harvard, Vancouver, ISO, and other styles
7

Compertore, David C., Filipp V. Ignatovich, and Michael A. Marcus. "Fiber coupler end face wavefront surface metrology." In SPIE Optical Engineering + Applications, edited by Erik Novak and James D. Trolinger. SPIE, 2015. http://dx.doi.org/10.1117/12.2186627.

Full text
APA, Harvard, Vancouver, ISO, and other styles
8

Ismail, Mohd Fauzi, Fatiha Naziera Yusof, and Rizal Mohamed Noor. "Texture formation model for end milling surface." In INTERNATIONAL CONFERENCE ON SMART MATERIALS AND STRUCTURES, ICSMS-2022. AIP Publishing, 2023. http://dx.doi.org/10.1063/5.0117693.

Full text
APA, Harvard, Vancouver, ISO, and other styles
9

Fu, Yanjun, Wendong Zou, Huirong Xiao, and Yuehong Gan. "A measuring technology for fiber connector end surface." In Photonics Asia 2004, edited by Anbo Wang, Yimo Zhang, and Yukihiro Ishii. SPIE, 2005. http://dx.doi.org/10.1117/12.581452.

Full text
APA, Harvard, Vancouver, ISO, and other styles
10

Kim, Taek, Junho Lee, Sangmoon Lee, et al. "End-pumped vertical external cavity surface emitting laser." In Integrated Optoelectronic Devices 2006, edited by Chun Lei and Kent D. Choquette. SPIE, 2006. http://dx.doi.org/10.1117/12.641988.

Full text
APA, Harvard, Vancouver, ISO, and other styles

Reports on the topic "End surface"

1

Murphy, Mr Thomas F. PR-226-9315-R01 Effects of Phosphoric Acid Treatment on Fusion-Bonded Epoxy Coating Performance. Pipeline Research Council International, Inc. (PRCI), 1994. http://dx.doi.org/10.55274/r0011905.

Full text
Abstract:
The objective of the research was to establish whether phosphoric acid treatment of line pipe should routinely be undertaken before the application of FBE coatings where chloride contamination is not present; to determine the levels of treatment which enhance or cause deterioration on the steel surface; to establish any synergism that may exist between specific FOE coatings and phosphoric acid treatment; to determine if coating performance correlates to residual phosphate on the steel surface, and to provide end-user companies with data to enable the proper selection of surface treatments for
APA, Harvard, Vancouver, ISO, and other styles
2

Fan, Jianhua, Weiqiang Kong, and Simon Furbo. Simulation and design of collector array units within large systems. IEA SHC Task 55, 2019. http://dx.doi.org/10.18777/ieashc-task55-2019-0006.

Full text
Abstract:
By the end of 2017, solar heating plants with a total surface of more than 1.3 million m2 were in operation in Denmark. Most solar collectors in the existing solar heating plants are typically flat plate collectors (FPC).
APA, Harvard, Vancouver, ISO, and other styles
3

Pawel, Steven J. Assessment of End-of-Life Behavior of the Surface Modification to Improve Cavitation-Erosion Resistance in the Mercury Target at the Spallation Neutron Source. Office of Scientific and Technical Information (OSTI), 2007. http://dx.doi.org/10.2172/931799.

Full text
APA, Harvard, Vancouver, ISO, and other styles
4

Hiscock, Adam I. Hiscock, Emily J. Kleber, Susanne U. Jänecke, Greg N. McDonald, Robert Q. Oaks Jr., and Tammy Rittenour. Fault Trace Mapping and Surface-Fault-Rupture Special Study Zone Delineation of the East and West Cache Fault Zones and Other Regional Faults, Utah. Utah Geological Survey, 2024. http://dx.doi.org/10.34191/ri-286.

Full text
Abstract:
The Cache Valley region in northern Utah and southern Idaho contains and is surrounded by several large, hazardous faults which pose significant earthquake risk. The 40-mile-long (65 km) East Cache fault zone (ECFZ) and the 35-mile-long (56 km) West Cache fault zone (WCFZ) bound the Cache Valley graben and both show evidence of large surface-faulting earthquakes in the late Quaternary. Other hazardous faults in the Cache Valley region include the intrabasin Dayton-Oxford fault, the Mantua area faults within the Wellsville Mountains, and the James Peak fault at the very southern end of the ECFZ
APA, Harvard, Vancouver, ISO, and other styles
5

Rich, William B., Robert R. Jacobs, Christopher S. Williams, and Robert J. Frosch. Repair and Strengthening of Bridges in Indiana Using Fiber Reinforced Polymer Systems: Volume 2–FRP Flexural Strengthening and End Region Repair Experimental Programs. Purdue University, 2021. http://dx.doi.org/10.5703/1288284317310.

Full text
Abstract:
For bridges that are experiencing deterioration, action is needed to ensure the structural performance is adequate for the demands imposed. Innovate repair and strengthening techniques can provide a cost-effective means to efficiently and safely extend the service lives of bridges. The use of fiber reinforced polymer (FRP) systems for the repair and strengthening of concrete bridges is increasing in popularity. Recognizing the potential benefits of the widespread use of FRP, a research project was initiated to determine the most appropriate applications of FRP in Indiana and provide recommenda
APA, Harvard, Vancouver, ISO, and other styles
6

Wilson, D., Steven Peckham, Max Krackow, Sora Haley, Sophia Bragdon, and Jay Clausen. Discriminating buried munitions based on physical models for their thermal response. Engineer Research and Development Center (U.S.), 2025. https://doi.org/10.21079/11681/49749.

Full text
Abstract:
Munitions and other objects buried near the Earth’s surface can often be recognized in infrared imagery because their thermal and radiative properties differ from the surrounding undisturbed soil. However, the evolution of the thermal signature over time is subject to many complex interacting processes, including incident solar radiation, heat conduction in the ground, longwave radiation from the surface, and sensible and latent heat exchanges with the atmosphere. This complexity makes development of robust classification algorithms particularly challenging. Machine-learning algorithms, althou
APA, Harvard, Vancouver, ISO, and other styles
7

Alter, Ross, Sandra LeGrand, Freddie Spates, et al. Meteorological influences of a major dust storm in Southwest Asia during July–August 2018. Engineer Research and Development Center (U.S.), 2022. http://dx.doi.org/10.21079/11681/45960.

Full text
Abstract:
Dust storms can be hazardous for aviation, military activities, and respiratory health and can occur on a wide variety of spatiotemporal scales with little to no warning. To properly forecast these storms, a comprehensive understanding of the meteorological dynamics that control their evolution is a prerequisite. To that end, we chose a major dust storm that occurred in Southwest Asia during July–August 2018 and conducted an observation-based analysis of the meteorological conditions that influenced the storm’s evolution. We found that the main impetus behind the dust storm was a large-scale m
APA, Harvard, Vancouver, ISO, and other styles
8

Ray, Laura, Madeleine Jordan, Steven Arcone, et al. Velocity field in the McMurdo shear zone from annual ground penetrating radar imaging and crevasse matching. Engineer Research and Development Center (U.S.), 2021. http://dx.doi.org/10.21079/11681/42623.

Full text
Abstract:
The McMurdo shear zone (MSZ) is strip of heavily crevassed ice oriented in the south-north direction and moving northward. Previous airborne surveys revealed a chaotic crevasse structure superimposed on a set of expected crevasse orientations at 45 degrees to the south-north flow (due to shear stress mechanisms). The dynamics that produced this chaotic structure are poorly understood. Our purpose is to present our field methodology and provide field data that will enable validation of models of the MSZ evolution, and here, we present a method for deriving a local velocity field from ground pen
APA, Harvard, Vancouver, ISO, and other styles
9

Hurlow, Hugh A., Paul C. Inkenbrandt, and Trevor H. Schlossnagle. Hydrogeology, Groundwater Chemistry, and Water Budget of Juab Valley, Eastern Juab County, Utah. Utah Geological Survey, 2022. http://dx.doi.org/10.34191/ss-170.

Full text
Abstract:
Juab Valley is a north-south-trending basin in the eastern Basin and Range Province. Juab Valley is bounded on the east by the Wasatch normal fault and the Wasatch Range and San Pitch Mountains, bounded on the west by Long Ridge and the West Hills. Juab Valley is at the southern end of Utah’s Wasatch Front, an area of projected rapid population growth and increased groundwater use. East-west-trending surface-water, groundwater, and water-rights boundaries approximately coincide along the valley’s geographic midline at Levan Ridge, an east-west trending watershed divide that separates the north
APA, Harvard, Vancouver, ISO, and other styles
10

Hart, Carl. Vibration survey of Room 47 with a laser doppler vibrometer : Main Laboratory Basement, U.S. Army ERDC-CRREL. Engineer Research and Development Center (U.S.), 2020. http://dx.doi.org/10.21079/11681/38919.

Full text
Abstract:
Plans are underway to create an acousto-optic laboratory on the campus of the Cold Regions Research and Engineering Laboratory. For this purpose, existing space in the basement of the Main Laboratory will be renovated. Demanding measurement techniques, such as interferometry, require a sufficiently quiet vibration environment (i.e., low vibration levels). As such, characterization of existing vibration conditions is necessary to determine vibration isolation requirements so that highly sensitive measurement activities are feasible. To this end, existing vibro-acoustic conditions were briefly s
APA, Harvard, Vancouver, ISO, and other styles
You might also be interested in the extended bibliographies on the topic 'End surface' for particular source types:
Journal articles Dissertations / Theses Books
We offer discounts on all premium plans for authors whose works are included in thematic literature selections. Contact us to get a unique promo code!

To the bibliography